summaryrefslogtreecommitdiff
path: root/arch/microblaze
AgeCommit message (Collapse)Author
2010-05-27asm-generic: remove ARCH_HAS_SG_CHAIN in scatterlist.hFUJITA Tomonori
There are more architectures that don't support ARCH_HAS_SG_CHAIN than those that support it. This removes removes ARCH_HAS_SG_CHAIN in asm-generic/scatterlist.h and lets arhictectures to define it. It's clearer than defining ARCH_HAS_SG_CHAIN asm-generic/scatterlist.h and undefing it in arhictectures that don't support it. Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-05-27asm-generic: remove ISA_DMA_THRESHOLD in scatterlist.hFUJITA Tomonori
This is the first half of the attempt to use asm-generic/scatterlist.h on every architecture. There are only two ways to define scatterlist structure. So it's easy to convert every architecture to use asm-generic/scatterlist.h. This patch: The trick for ISA_DMA_THRESHOLD in asm-generic/scatterlist.h doesn't work for powerpc. This lets architectures defin ISA_DMA_THRESHOLD. Hopefully, we can remove ISA_DMA_THRESHOLD in the future; we can do better to decide if the bouncing is necessary or not. Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Richard Henderson <rth@twiddle.net> Cc: Ivan Kokshaysky <ink@jurassic.park.msu.ru> Cc: Matt Turner <mattst88@gmail.com> Cc: Russell King <linux@arm.linux.org.uk> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Paul Mackerras <paulus@samba.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-05-22Merge remote branch 'origin' into secretlab/next-devicetreeGrant Likely
Merging in current state of Linus' tree to deal with merge conflicts and build failures in vio.c after merge. Conflicts: drivers/i2c/busses/i2c-cpm.c drivers/i2c/busses/i2c-mpc.c drivers/net/gianfar.c Also fixed up one line in arch/powerpc/kernel/vio.c to use the correct node pointer. Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2010-05-22arch/microblaze: Move dma_mask from of_device into pdev_archdataGrant Likely
By moving dma_mask into pdev_archdata, and adding archdata to struct of_device, it makes it possible to substitute of_device with struct platform_device, which is a stepping stone to removing the of_platform bus entirely. Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2010-05-20Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next-2.6Linus Torvalds
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next-2.6: (1674 commits) qlcnic: adding co maintainer ixgbe: add support for active DA cables ixgbe: dcb, do not tag tc_prio_control frames ixgbe: fix ixgbe_tx_is_paused logic ixgbe: always enable vlan strip/insert when DCB is enabled ixgbe: remove some redundant code in setting FCoE FIP filter ixgbe: fix wrong offset to fc_frame_header in ixgbe_fcoe_ddp ixgbe: fix header len when unsplit packet overflows to data buffer ipv6: Never schedule DAD timer on dead address ipv6: Use POSTDAD state ipv6: Use state_lock to protect ifa state ipv6: Replace inet6_ifaddr->dead with state cxgb4: notify upper drivers if the device is already up when they load cxgb4: keep interrupts available when the ports are brought down cxgb4: fix initial addition of MAC address cnic: Return SPQ credit to bnx2x after ring setup and shutdown. cnic: Convert cnic_local_flags to atomic ops. can: Fix SJA1000 command register writes on SMP systems bridge: fix build for CONFIG_SYSFS disabled ARCNET: Limit com20020 PCI ID matches for SOHARD cards ... Fix up various conflicts with pcmcia tree drivers/net/ {pcmcia/3c589_cs.c, wireless/orinoco/orinoco_cs.c and wireless/orinoco/spectrum_cs.c} and feature removal (Documentation/feature-removal-schedule.txt). Also fix a non-content conflict due to pm_qos_requirement getting renamed in the PM tree (now pm_qos_request) in net/mac80211/scan.c
2010-05-20Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial: (44 commits) vlynq: make whole Kconfig-menu dependant on architecture add descriptive comment for TIF_MEMDIE task flag declaration. EEPROM: max6875: Header file cleanup EEPROM: 93cx6: Header file cleanup EEPROM: Header file cleanup agp: use NULL instead of 0 when pointer is needed rtc-v3020: make bitfield unsigned PCI: make bitfield unsigned jbd2: use NULL instead of 0 when pointer is needed cciss: fix shadows sparse warning doc: inode uses a mutex instead of a semaphore. uml: i386: Avoid redefinition of NR_syscalls fix "seperate" typos in comments cocbalt_lcdfb: correct sections doc: Change urls for sparse Powerpc: wii: Fix typo in comment i2o: cleanup some exit paths Documentation/: it's -> its where appropriate UML: Fix compiler warning due to missing task_struct declaration UML: add kernel.h include to signal.c ...
2010-05-18Merge branch 'master' of /home/davem/src/GIT/linux-2.6/David S. Miller
Conflicts: include/linux/mod_devicetable.h scripts/mod/file2alias.c
2010-05-18of: eliminate of_device->node and dev_archdata->{of,prom}_nodeGrant Likely
This patch eliminates the node pointer from struct of_device and the of_node (or prom_node) pointer from struct dev_archdata since the node pointer is now part of struct device proper when CONFIG_OF is set, and all users of the old pointer locations have already been converted over to use device->of_node. Also remove dev_archdata_{get,set}_node() as it is no longer used by anything. Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2010-05-18of: Always use 'struct device.of_node' to get device node pointer.Grant Likely
The following structure elements duplicate the information in 'struct device.of_node' and so are being eliminated. This patch makes all readers of these elements use device.of_node instead. (struct of_device *)->node (struct dev_archdata *)->prom_node (sparc) (struct dev_archdata *)->of_node (powerpc & microblaze) Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2010-05-14add descriptive comment for TIF_MEMDIE task flag declaration.Andreas Dilger
Signed-off-by: Andreas Dilger <adilger@dilger.ca> Acked-by: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2010-05-14microblaze: Fix module loading on system with WB cacheMichal Simek
There is necessary to flush whole dcache. Icache work should be done in kernel/module.c. Signed-off-by: Michal Simek <monstr@monstr.eu>
2010-05-13microblaze: export assembly functions used by modulesMichal Simek
Export __strncpy_user, memory_size, ioremap_bot for modules. Signed-off-by: Michal Simek <monstr@monstr.eu>
2010-05-13microblaze: Remove powerpc code from Microblaze portMichal Simek
Remove eeh_add_device_tree_late which is powerpc specific code. Signed-off-by: Michal Simek <monstr@monstr.eu>
2010-05-13microblaze: Remove compilation warnings in cache macroMichal Simek
CC arch/microblaze/kernel/cpu/cache.o arch/microblaze/kernel/cpu/cache.c: In function '__invalidate_dcache_range_wb': arch/microblaze/kernel/cpu/cache.c:398: warning: ISO C90 forbids mixed declarations and code arch/microblaze/kernel/cpu/cache.c: In function '__flush_dcache_range_wb': arch/microblaze/kernel/cpu/cache.c:509: warning: ISO C90 forbids mixed declara Signed-off-by: Michal Simek <monstr@monstr.eu>
2010-05-13microblaze: export assembly functions used by modulesSteven J. Magnani
Modules that use copy_{to,from}_user(), memcpy(), and memset() fail to build in certain circumstances. Signed-off-by: Steven J. Magnani <steve@digidescorp.com> Signed-off-by: Michal Simek <monstr@monstr.eu>
2010-05-13microblaze: fix get_user/put_user side-effectsSteven J. Magnani
The Microblaze implementations of get_user() and (MMU) put_user() evaluate the address argument more than once. This causes unexpected side-effects for invocations that include increment operators, i.e. get_user(foo, bar++). This patch also removes the distinction between MMU and noMMU put_user(). Without the patch: $ echo 1234567890 > /proc/sys/kernel/core_pattern $ cat /proc/sys/kernel/core_pattern 12345 Signed-off-by: Steven J. Magnani <steve@digidescorp.com>
2010-05-13microblaze: re-enable interrupts before calling scheduleSteven J. Magnani
schedule() should not be called with interrupts disabled. Signed-off-by: Steven J. Magnani <steve@digidescorp.com> Signed-off-by: Michal Simek <monstr@monstr.eu>
2010-05-12Merge branch 'master' of ↵David S. Miller
master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6 Conflicts: Documentation/feature-removal-schedule.txt drivers/net/wireless/ath/ar9170/usb.c drivers/scsi/iscsi_tcp.c net/ipv4/ipmr.c
2010-05-07Revert "microblaze: Kill NET_SKB_PAD and NET_IP_ALIGN overrides."David S. Miller
This reverts commit 39e0786d3cf39c6d2f47b4818ae2da8b8ebc9ce2. On request from microblaze developers, they are going to handle this differently. Signed-off-by: David S. Miller <davem@davemloft.net>
2010-05-06microblaze: Kill NET_SKB_PAD and NET_IP_ALIGN overrides.David S. Miller
NET_IP_ALIGN defaults to 2, no need to override. NET_SKB_PAD is now 64, which is much larger than microblaze's L1_CACHE_SIZE so no need to override that either. Signed-off-by: David S. Miller <davem@davemloft.net>
2010-05-06microblaze: Defconfig updateMichal Simek
Signed-off-by: Michal Simek <monstr@monstr.eu>
2010-05-06microblaze: Optimize CACHE_LOOP_LIMITS and CACHE_RANGE_LOOP macrosMichal Simek
1. Remove CACHE_ALL_LOOP2 macro because it is identical to CACHE_ALL_LOOP 2. Change BUG_ON to WARN_ON 3. Remove end aligned from CACHE_LOOP_LIMITS. C implementation do not need aligned end address and ASM code do aligned in their macros 4. ASM optimized CACHE_RANGE_LOOP_1/2 macros needs to get aligned end address. Because end address is compound from start + size, end address is the first address which is exclude. Here is the corresponding code which describe it. + int align = ~(line_length - 1); + end = ((end & align) == end) ? end - line_length : end & align; a) end is aligned: it is necessary to subtruct line length because we don't want to work with next cacheline b) end address is not aligned: Just align it to be ready for ASM code. Signed-off-by: Michal Simek <monstr@monstr.eu>
2010-05-06microblaze: Fix consistent-sync codeMichal Simek
PCI_DMA_FROMDEVICE should call invalidation not flushing. Signed-off-by: Michal Simek <monstr@monstr.eu>
2010-05-06microblaze: Define correct L1_CACHE_SHIFT valueMichal Simek
Microblaze cacheline length is configurable and current cpu uses two cacheline length 4 and 8. We are taking conservative maximum value to be sure that cacheline alignment is satisfied for all cases. Here is the calculation for cacheline lenght 8 32bit=4Byte values which is corresponding with SHIFT 5. Signed-off-by: Michal Simek <monstr@monstr.eu>
2010-05-06microblaze: cpuinfo shows cache line lengthMichal Simek
Show cache line length in /proc/cpuinfo. Signed-off-by: Michal Simek <monstr@monstr.eu>
2010-05-06microblaze: Fix kmalloc alignment on non-coherent DMA platformsMichal Simek
Based on PowerPC patche 52142e756e9bf6485d3d53596e8aff2e816a7253 PowerPC description: On platforms doing non-coherent DMA (4xx, 8xx, ...), it's important that the kmalloc minimum alignment is set to the cache line size, to avoid sharing cache lines between different objects, so that DMA to one of the objects doesn't corrupt the other. Signed-off-by: Michal Simek <monstr@monstr.eu>
2010-05-06microblaze: Fix typo fault in cache codeMichal Simek
Copy & paste error. Signed-off-by: Michal Simek <monstr@monstr.eu>
2010-05-06microblaze: Fix consistent codeMichal Simek
This patch fix consistent code which had problems with consistent_free function. I am not sure if we need to call flush_tlb_all after it but it keeps tlbs synced. I added noMMU and MMU version together. Uncached shadow feature is not tested. Signed-off-by: Michal Simek <monstr@monstr.eu>
2010-05-06microblaze: pci-dma: use include/linux/dma-mapping.hMichal Simek
Based on af407c6db16aa9ca63559076dbe620220a822580 and f41b177157718abe9a93868bb76e47d4a6f3681d Signed-off-by: Michal Simek <monstr@monstr.eu>
2010-05-06microblaze: page.h: Remove get_user_page and free_user_pageMichal Simek
Remove ancient macros which are here from Linux-2.4 Signed-off-by: Michal Simek <monstr@monstr.eu>
2010-05-06microblaze: Remove "cache" optimized copy_page functionMichal Simek
Current implementation doesn't handle dcache_line_length correctly that's why is better to use generic memcpy. Cache optimized function could be good way howto improve performance but must be based on benchmarking not blind function like this. Signed-off-by: Michal Simek <monstr@monstr.eu>
2010-05-06microblaze: invoke oom-killer from page faultNick Piggin
As explained in commit 1c0fe6e3bd, we want to call the architecture independent oom killer when getting an unexplained OOM from handle_mm_fault, rather than simply killing current. Cc: microblaze-uclinux@itee.uq.edu.au Cc: Michal Simek <monstr@monstr.eu> Cc: linux-arch@vger.kernel.org Signed-off-by: Nick Piggin <npiggin@suse.de> Acked-by: David Rientjes <rientjes@google.com> Acked-by: Michal Simek <monstr@monstr.eu>
2010-05-06microblaze: fix divide by zero exception messageRandy Dunlap
Fix divide exception message to say "divide by zero". Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com> Cc: Michal Simek <monstr@monstr.eu> Cc: microblaze-uclinux@itee.uq.edu.au Signed-off-by: Michal Simek <monstr@monstr.eu>
2010-05-06microblaze: Add isa_dma_bridge_buggy to dma.hMichal Simek
It is necessary for several drivers. Signed-off-by: Michal Simek <monstr@monstr.eu>
2010-05-06microblaze: Remove ancient codeMichal Simek
I found several function which we don't use that's why I am removing them. Signed-off-by: Michal Simek <monstr@monstr.eu>
2010-05-06microblaze: Quiet section mismatch warnings for MMU versionMichal Simek
Remove section mismatch - based on ppc aproach. WARNING: vmlinux.o(.text+0x64834): Section mismatch in reference from the function __pte_alloc_kernel() to the function .init.text:early_get_page() The function __pte_alloc_kernel() references the function __init early_get_page(). This is often because __pte_alloc_kernel lacks a __init annotation or the annotation of early_get_page is wrong. Signed-off-by: Michal Simek <monstr@monstr.eu>
2010-05-06microblaze: Quiet section mismatch warningsSteven J. Magnani
_start is located in .text, which causes mismatch warnings with machine_early_init() and start_kernel() in .init.text. Signed-off-by: Steven J. Magnani <steve@digidescorp.com> Signed-off-by: Michal Simek <monstr@monstr.eu>
2010-05-06microblaze: Fix IRQ entry/exit ftracingSteven J. Magnani
Function traces on Microblaze don't include IRQ entry and exit arrows, i.e. 0) | memcpy_toiovec() { 0) ==========> | 0) | do_IRQ() { ... 0) <========== | 0) ! 5414.000 us | } ...because do_IRQ() doesn't have the proper attributes. Signed-off-by: Steven J. Magnani <steve@digidescorp.com> Signed-off-by: Michal Simek <monstr@monstr.eu>
2010-05-06microblaze: resource/PCI: align functions now return start of resourceMichal Simek
This change should be part of b26b2d494b659f988b4d75eb394dfa0ddac415c9 Origin description: resource/PCI: align functions now return start of resource As suggested by Linus, align functions should return the start of a resource, not void. An update of "res->start" is no longer necessary. Signed-off-by: Michal Simek <monstr@monstr.eu>
2010-05-06microblaze: PCI: add pci_bus_for_each_resource(), remove direct ↵Michal Simek
bus->resource[] refs This change should be part of 89a74ecccd1f78e51faf6287e5c0e93a92ac096e Origin description: PCI: add pci_bus_for_each_resource(), remove direct bus->resource[] refs No functional change; this converts loops that iterate from 0 to PCI_BUS_NUM_RESOURCES through pci_bus resource[] table to use the pci_bus_for_each_resource() iterator instead. This doesn't change the way resources are stored; it merely removes dependencies on the fact that they're in a table. Signed-off-by: Michal Simek <monstr@monstr.eu>
2010-04-28driver-core: Add device node pointer to struct deviceGrant Likely
Currently, platforms using CONFIG_OF add a 'struct device_node *of_node' to dev->archdata. However, with CONFIG_OF becoming generic for all architectures, it makes sense for commonality to move it out of archdata and into struct device proper. This patch adds a struct device_node *of_node member to struct device and updates all locations which currently write the device_node pointer into archdata to also update dev->of_node. Subsequent patches will modify callers to use the archdata location and ultimately remove the archdata member entirely. Signed-off-by: Grant Likely <grant.likely@secretlab.ca> Acked-by: Greg Kroah-Hartman <gregkh@suse.de> CC: Michal Simek <monstr@monstr.eu> CC: Greg Kroah-Hartman <gregkh@suse.de> CC: Benjamin Herrenschmidt <benh@kernel.crashing.org> CC: "David S. Miller" <davem@davemloft.net> CC: Stephen Rothwell <sfr@canb.auug.org.au> CC: Jeremy Kerr <jeremy.kerr@canonical.com> CC: microblaze-uclinux@itee.uq.edu.au CC: linux-kernel@vger.kernel.org CC: linuxppc-dev@ozlabs.org CC: sparclinux@vger.kernel.org
2010-04-13Add non-Virtex5 support for LL TEMAC driverJohn Linn
This patch adds support for using the LL TEMAC Ethernet driver on non-Virtex 5 platforms by adding support for accessing the Soft DMA registers as if they were memory mapped instead of solely through the DCR's (available on the Virtex 5). The patch also updates the driver so that it runs on the MicroBlaze. The changes were tested on the PowerPC 440, PowerPC 405, and the MicroBlaze platforms. Signed-off-by: John Tyner <jtyner@cs.ucr.edu> Signed-off-by: John Linn <john.linn@xilinx.com> Acked-by: Grant Likely <grant.likely@secretlab.ca> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-04-07microblaze: Remove unused variable from ptraceMichal Simek
Patch b3c1e01a09d6af2dd7811a066ffcfc5171be2bed should do it. Signed-off-by: Michal Simek <monstr@monstr.eu>
2010-04-07microblaze: io.h: Add io big-endian functionJohn Linn
Add new io big-endian function. They will be used for uartlite and spi driver. Signed-off-by: John Linn <john.linn@xilinx.com> Signed-off-by: Michal Simek <monstr@monstr.eu>
2010-04-07microblaze: Fix futex codeMichal Simek
Use logical and NOT for ANDN. It was likely type fault. Signed-off-by: Michal Simek <monstr@monstr.eu>
2010-04-07microblaze: Fix ftrace_update_ftrace_func panicSteven J. Magnani
The Microblaze dynamic ftrace code assumes a call ordering that is not met in all scenarios. Specifically, executing a command similar to: echo 105 > /sys/kernel/debug/tracing/set_ftrace_pid before any other tracing-related commands results in a kernel panic: BUG: failure at arch/microblaze/kernel/ftrace.c:198/ftrace_update_ftrace_func()! Recoding ftrace_update_ftrace_func() to use &ftrace_caller directly eliminates the need to capture its address elsewhere (and thus rely on a particular call sequence). Signed-off-by: Steven J. Magnani <steve@digidescorp.com> Signed-off-by: Michal Simek <monstr@monstr.eu>
2010-04-05Merge branch 'master' into export-slabhTejun Heo
2010-04-01microblaze: Support word copying in copy_tofrom_userMichal Simek
Word copying is used only for aligned addresses. Here is space for improving to use any better copying technique. Look at memcpy implementation. Signed-off-by: Michal Simek <monstr@monstr.eu>
2010-04-01microblaze: Print early printk information to log bufferMichal Simek
If early printk console is not enabled then all messages are written to log buffer. Signed-off-by: Michal Simek <monstr@monstr.eu>
2010-04-01microblaze: head.S typo fixMichal Simek
I forget to change register name in comments. Signed-off-by: Michal Simek <monstr@monstr.eu>
generated by cgit v1.2.3 (git 2.39.1) at 2024-11-02 21:27:04 +0000