| Age | Commit message (Collapse) | Author |
|---|
|
Found a NUMA system that doesn't have RAM installed at the first
socket which hangs while executing init scripts.
bisected it to:
| commit 932967202182743c01a2eee4bdfa2c42697bc586
| Author: Shaohua Li <shaohua.li@intel.com>
| Date: Wed Oct 20 11:07:03 2010 +0800
|
| x86: Spread tlb flush vector between nodes
It turns out when first socket is not online it could have cpus on
node1 tlb_offset set to bigger than NUM_INVALIDATE_TLB_VECTORS.
That could affect systems like 4 sockets, but socket 2 doesn't
have installed, sockets 3 will get too big tlb_offset.
Need to use real online node idx.
Signed-off-by: Yinghai Lu <yinghai@kernel.org>
Acked-by: Shaohua Li <shaohua.li@intel.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
LKML-Reference: <4CDEDE59.40603@kernel.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
|
|
Mark tlb_cpuhp_notify as __cpuinit. It's basically a callback
function, which is called from __cpuinit init_smp_flash(). So -
it's safe.
We were warned by the following warning:
WARNING: arch/x86/mm/built-in.o(.text+0x356d): Section mismatch
in reference from the function tlb_cpuhp_notify() to the
function .cpuinit.text:calculate_tlb_offset()
The function tlb_cpuhp_notify() references
the function __cpuinit calculate_tlb_offset().
This is often because tlb_cpuhp_notify lacks a __cpuinit
annotation or the annotation of calculate_tlb_offset is wrong.
Signed-off-by: Rakib Mullick <rakib.mullick@gmail.com>
Cc: Borislav Petkov <borislav.petkov@amd.com>
Cc: Shaohua Li <shaohua.li@intel.com>
LKML-Reference: <AANLkTinWQRG=HA9uB3ad0KAqRRTinL6L_4iKgF84coph@mail.gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip
* 'x86-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
x86, alternative: Call stop_machine_text_poke() on all cpus
x86-32: Restore irq stacks NUMA-aware allocations
x86, memblock: Fix early_node_mem with big reserved region.
* 'x86-uv-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
x86, uv: More Westmere support on SGI UV
x86, uv: Enable Westmere support on SGI UV
|
|
Xen can reserve huge amounts of memory for pre-ballooning, but that
still shows as RAM in the e820 memory map. early_node_mem could not
find range because of start/end adjusting, and will go through the
fallback path. However, the fallback patch is still using
memblock_x86_find_range_node(), and it is partially top-down because
it go through active_range entries from low to high.
Let's use memblock_find_in_range instead memblock_x86_find_range_node.
So get real top down in fallback path.
We may still need to make memblock_x86_find_range_node to do overall
top_down work.
Reported-by: Jeremy Fitzhardinge <jeremy@goop.org>
Tested-by: Jeremy Fitzhardinge <jeremy@goop.org>
Tested-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Signed-off-by: Yinghai Lu <yinghai@kernel.org>
LKML-Reference: <4CC9A9C9.8020700@kernel.org>
Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
|
|
Signed-off-by: Zimny Lech <napohybelskurwysynom2010@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Christoph reported a nice splat which illustrated a race in the new stack
based kmap_atomic implementation.
The problem is that we pop our stack slot before we're completely done
resetting its state -- in particular clearing the PTE (sometimes that's
CONFIG_DEBUG_HIGHMEM). If an interrupt happens before we actually clear
the PTE used for the last slot, that interrupt can reuse the slot in a
dirty state, which triggers a BUG in kmap_atomic().
Fix this by introducing kmap_atomic_idx() which reports the current slot
index without actually releasing it and use that to find the PTE and delay
the _pop() until after we're completely done.
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Reported-by: Christoph Hellwig <hch@infradead.org>
Acked-by: Rik van Riel <riel@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
access_error() already takes error_code as an argument, so there is
no need for an additional write flag.
Signed-off-by: Michel Lespinasse <walken@google.com>
Acked-by: Rik van Riel <riel@redhat.com>
Cc: Nick Piggin <nickpiggin@yahoo.com.au>
Acked-by: Wu Fengguang <fengguang.wu@intel.com>
Cc: Ying Han <yinghan@google.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Thomas Gleixner <tglx@linutronix.de>
Acked-by: "H. Peter Anvin" <hpa@zytor.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
This change reduces mmap_sem hold times that are caused by waiting for
disk transfers when accessing file mapped VMAs.
It introduces the VM_FAULT_ALLOW_RETRY flag, which indicates that the call
site wants mmap_sem to be released if blocking on a pending disk transfer.
In that case, filemap_fault() returns the VM_FAULT_RETRY status bit and
do_page_fault() will then re-acquire mmap_sem and retry the page fault.
It is expected that the retry will hit the same page which will now be
cached, and thus it will complete with a low mmap_sem hold time.
Tests:
- microbenchmark: thread A mmaps a large file and does random read accesses
to the mmaped area - achieves about 55 iterations/s. Thread B does
mmap/munmap in a loop at a separate location - achieves 55 iterations/s
before, 15000 iterations/s after.
- We are seeing related effects in some applications in house, which show
significant performance regressions when running without this change.
[akpm@linux-foundation.org: fix warning & crash]
Signed-off-by: Michel Lespinasse <walken@google.com>
Acked-by: Rik van Riel <riel@redhat.com>
Acked-by: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Nick Piggin <nickpiggin@yahoo.com.au>
Reviewed-by: Wu Fengguang <fengguang.wu@intel.com>
Cc: Ying Han <yinghan@google.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Thomas Gleixner <tglx@linutronix.de>
Acked-by: "H. Peter Anvin" <hpa@zytor.com>
Cc: <linux-arch@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Keep the current interface but ignore the KM_type and use a stack based
approach.
The advantage is that we get rid of crappy code like:
#define __KM_PTE \
(in_nmi() ? KM_NMI_PTE : \
in_irq() ? KM_IRQ_PTE : \
KM_PTE0)
and in general can stop worrying about what context we're in and what kmap
slots might be appropriate for that.
The downside is that FRV kmap_atomic() gets more expensive.
For now we use a CPP trick suggested by Andrew:
#define kmap_atomic(page, args...) __kmap_atomic(page)
to avoid having to touch all kmap_atomic() users in a single patch.
[ not compiled on:
- mn10300: the arch doesn't actually build with highmem to begin with ]
[akpm@linux-foundation.org: coding-style fixes]
[akpm@linux-foundation.org: fix up drivers/gpu/drm/i915/intel_overlay.c]
Acked-by: Rik van Riel <riel@redhat.com>
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Acked-by: Chris Metcalf <cmetcalf@tilera.com>
Cc: David Howells <dhowells@redhat.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Russell King <rmk@arm.linux.org.uk>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: David Miller <davem@davemloft.net>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Dave Airlie <airlied@linux.ie>
Cc: Li Zefan <lizf@cn.fujitsu.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/ak/linux-mce-2.6
* 'hwpoison' of git://git.kernel.org/pub/scm/linux/kernel/git/ak/linux-mce-2.6: (22 commits)
Add _addr_lsb field to ia64 siginfo
Fix migration.c compilation on s390
HWPOISON: Remove retry loop for try_to_unmap
HWPOISON: Turn addr_valid from bitfield into char
HWPOISON: Disable DEBUG by default
HWPOISON: Convert pr_debugs to pr_info
HWPOISON: Improve comments in memory-failure.c
x86: HWPOISON: Report correct address granuality for huge hwpoison faults
Encode huge page size for VM_FAULT_HWPOISON errors
Fix build error with !CONFIG_MIGRATION
hugepage: move is_hugepage_on_freelist inside ifdef to avoid warning
Clean up __page_set_anon_rmap
HWPOISON, hugetlb: fix unpoison for hugepage
HWPOISON, hugetlb: soft offlining for hugepage
HWPOSION, hugetlb: recover from free hugepage error when !MF_COUNT_INCREASED
hugetlb: move refcounting in hugepage allocation inside hugetlb_lock
HWPOISON, hugetlb: add free check to dequeue_hwpoison_huge_page()
hugetlb: hugepage migration core
hugetlb: redefine hugepage copy functions
hugetlb: add allocate function for hugepage migration
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip
* 'x86-trampoline-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
x86-32, mm: Add an initial page table for core bootstrapping
|
|
Conflicts:
mm/memory-failure.c
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip
* 'core-memblock-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: (74 commits)
x86-64: Only set max_pfn_mapped to 512 MiB if we enter via head_64.S
xen: Cope with unmapped pages when initializing kernel pagetable
memblock, bootmem: Round pfn properly for memory and reserved regions
memblock: Annotate memblock functions with __init_memblock
memblock: Allow memblock_init to be called early
memblock/arm: Fix memblock_region_is_memory() typo
x86, memblock: Remove __memblock_x86_find_in_range_size()
memblock: Fix wraparound in find_region()
x86-32, memblock: Make add_highpages honor early reserved ranges
x86, memblock: Fix crashkernel allocation
arm, memblock: Fix the sparsemem build
memblock: Fix section mismatch warnings
powerpc, memblock: Fix memblock API change fallout
memblock, microblaze: Fix memblock API change fallout
x86: Remove old bootmem code
x86, memblock: Use memblock_memory_size()/memblock_free_memory_size() to get correct dma_reserve
x86: Remove not used early_res code
x86, memblock: Replace e820_/_early string with memblock_
x86: Use memblock to replace early_res
x86, memblock: Use memblock_debug to control debug message print out
...
Fix up trivial conflicts in arch/x86/kernel/setup.c and kernel/Makefile
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip
* 'x86-vmware-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
x86, paravirt: Remove alloc_pmd_clone hook, only used by VMI
x86, vmware: Remove deprecated VMI kernel support
Fix up trivial #include conflict in arch/x86/kernel/smpboot.c
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip
* 'x86-mm-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
x86-32, percpu: Correct the ordering of the percpu readmostly section
x86, mm: Enable ARCH_DMA_ADDR_T_64BIT with X86_64 || HIGHMEM64G
x86: Spread tlb flush vector between nodes
percpu: Introduce a read-mostly percpu API
x86, mm: Fix incorrect data type in vmalloc_sync_all()
x86, mm: Hold mm->page_table_lock while doing vmalloc_sync
x86, mm: Fix bogus whitespace in sync_global_pgds()
x86-32: Fix sparse warning for the __PHYSICAL_MASK calculation
x86, mm: Add RESERVE_BRK_ARRAY() helper
mm, x86: Saving vmcore with non-lazy freeing of vmas
x86, kdump: Change copy_oldmem_page() to use cached addressing
x86, mm: fix uninitialized addr in kernel_physical_mapping_init()
x86, kmemcheck: Remove double test
x86, mm: Make spurious_fault check explicitly check the PRESENT bit
x86-64, mem: Update all PGDs for direct mapping and vmemmap mapping changes
x86, mm: Separate x86_64 vmalloc_sync_all() into separate functions
x86, mm: Avoid unnecessary TLB flush
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip
* 'x86-cleanups-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
x86: Remove stale pmtimer_64.c
x86, cleanups: Use clear_page/copy_page rather than memset/memcpy
x86: Remove unnecessary #ifdef ACPI/X86_IO_ACPI
x86, cleanup: Remove obsolete boot_cpu_id variable
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip
* 'x86-amd-nb-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
x86, amd_nb: Enable GART support for AMD family 0x15 CPUs
x86, amd: Use compute unit information to determine thread siblings
x86, amd: Extract compute unit information for AMD CPUs
x86, amd: Add support for CPUID topology extension of AMD CPUs
x86, nmi: Support NMI watchdog on newer AMD CPU families
x86, mtrr: Assume SYS_CFG[Tom2ForceMemTypeWB] exists on all future AMD CPUs
x86, k8: Rename k8.[ch] to amd_nb.[ch] and CONFIG_K8_NB to CONFIG_AMD_NB
x86, k8-gart: Decouple handling of garts and northbridges
x86, cacheinfo: Fix dependency of AMD L3 CID
x86, kvm: add new AMD SVM feature bits
x86, cpu: Fix allowed CPUID bits for KVM guests
x86, cpu: Update AMD CPUID feature bits
x86, cpu: Fix renamed, not-yet-shipping AMD CPUID feature bit
x86, AMD: Remove needless CPU family check (for L3 cache info)
x86, tsc: Remove CPU frequency calibration on AMD
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip
* 'perf-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: (163 commits)
tracing: Fix compile issue for trace_sched_wakeup.c
[S390] hardirq: remove pointless header file includes
[IA64] Move local_softirq_pending() definition
perf, powerpc: Fix power_pmu_event_init to not use event->ctx
ftrace: Remove recursion between recordmcount and scripts/mod/empty
jump_label: Add COND_STMT(), reducer wrappery
perf: Optimize sw events
perf: Use jump_labels to optimize the scheduler hooks
jump_label: Add atomic_t interface
jump_label: Use more consistent naming
perf, hw_breakpoint: Fix crash in hw_breakpoint creation
perf: Find task before event alloc
perf: Fix task refcount bugs
perf: Fix group moving
irq_work: Add generic hardirq context callbacks
perf_events: Fix transaction recovery in group_sched_in()
perf_events: Fix bogus AMD64 generic TLB events
perf_events: Fix bogus context time tracking
tracing: Remove parent recording in latency tracer graph options
tracing: Use one prologue for the preempt irqs off tracer function tracers
...
|
|
Currently flush tlb vector allocation is based on below equation:
sender = smp_processor_id() % 8
This isn't optimal, CPUs from different node can have the same vector, this
causes a lot of lock contention. Instead, we can assign the same vectors to
CPUs from the same node, while different node has different vectors. This has
below advantages:
a. if there is lock contention, the lock contention is between CPUs from one
node. This should be much cheaper than the contention between nodes.
b. completely avoid lock contention between nodes. This especially benefits
kswapd, which is the biggest user of tlb flush, since kswapd sets its affinity
to specific node.
In my test, this could reduce > 20% CPU overhead in extreme case.The test
machine has 4 nodes and each node has 16 CPUs. I then bind each node's kswapd
to the first CPU of the node. I run a workload with 4 sequential mmap file
read thread. The files are empty sparse file. This workload will trigger a
lot of page reclaim and tlbflush. The kswapd bind is to easy trigger the
extreme tlb flush lock contention because otherwise kswapd keeps migrating
between CPUs of a node and I can't get stable result. Sure in real workload,
we can't always see so big tlb flush lock contention, but it's possible.
[ hpa: folded in fix from Eric Dumazet to use this_cpu_read() ]
Signed-off-by: Shaohua Li <shaohua.li@intel.com>
LKML-Reference: <1287544023.4571.8.camel@sli10-conroe.sh.intel.com>
Cc: Eric Dumazet <eric.dumazet@gmail.com>
Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
|
|
This patch adds an initial page table with low mappings used exclusively
for booting APs/resuming after ACPI suspend/machine restart. After this,
there's no need to add low mappings to swapper_pg_dir and zap them later
or create own swsusp PGD page solely for ACPI sleep needs - we have
initial_page_table for that.
Signed-off-by: Borislav Petkov <bp@alien8.de>
LKML-Reference: <20101020070526.GA9588@liondog.tnic>
Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
|
|
|
|
|
|
arch/x86/mm/fault.c: In function 'vmalloc_sync_all':
arch/x86/mm/fault.c:238: warning: assignment makes integer from pointer without a cast
introduced by 617d34d9e5d8326ec8f188c616aa06ac59d083fe.
Signed-off-by: Borislav Petkov <borislav.petkov@amd.com>
LKML-Reference: <20101020103642.GA3135@kryptos.osrc.amd.com>
Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
|
|
Take mm->page_table_lock while syncing the vmalloc region. This prevents
a race with the Xen pagetable pin/unpin code, which expects that the
page_table_lock is already held. If this race occurs, then Xen can see
an inconsistent page type (a page can either be read/write or a pagetable
page, and pin/unpin converts it between them), which will cause either
the pin or the set_p[gm]d to fail; either will crash the kernel.
vmalloc_sync_all() should be called rarely, so this extra use of
page_table_lock should not interfere with its normal users.
The mm pointer is stashed in the pgd page's index field, as that won't
be otherwise used for pgds.
Reported-by: Ian Campbell <ian.cambell@eu.citrix.com>
Originally-by: Jan Beulich <jbeulich@novell.com>
LKML-Reference: <4CB88A4C.1080305@goop.org>
Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
|
|
Whitespace cleanup only.
Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
|
|
In x86, faults exit by executing the iret instruction, which then
reenables NMIs if we faulted in NMI context. Then if a fault
happens in NMI, another NMI can nest after the fault exits.
But we don't yet support nested NMIs because we have only one NMI
stack. To prevent from that, check that vmalloc and kmemcheck
faults don't happen in this context. Most of the other kernel faults
in NMIs can be more easily spotted by finding explicit
copy_from,to_user() calls on review.
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
|
|
Xen requires that all pages containing pagetable entries to be mapped
read-only. If pages used for the initial pagetable are already mapped
then we can change the mapping to RO. However, if they are initially
unmapped, we need to make sure that when they are later mapped, they
are also mapped RO.
We do this by knowing that the kernel pagetable memory is pre-allocated
in the range e820_table_start - e820_table_end, so any pfn within this
range should be mapped read-only. However, the pagetable setup code
early_ioremaps the pages to write their entries, so we must make sure
that mappings created in the early_ioremap fixmap area are mapped RW.
(Those mappings are removed before the pages are presented to Xen
as pagetable pages.)
Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
LKML-Reference: <4CB63A80.8060702@goop.org>
Cc: Yinghai Lu <yinghai@kernel.org>
Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
|
|
Reason for merge:
Forward-port urgent change to arch/x86/mm/srat_64.c to the memblock tree.
Resolved Conflicts:
arch/x86/mm/srat_64.c
Originally-by: Yinghai Lu <yinghai@kernel.org>
Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
|
|
Russ reported SGI UV is broken recently. He said:
| The SRAT table shows that memory range is spread over two nodes.
|
| SRAT: Node 0 PXM 0 100000000-800000000
| SRAT: Node 1 PXM 1 800000000-1000000000
| SRAT: Node 0 PXM 0 1000000000-1080000000
|
|Previously, the kernel early_node_map[] would show three entries
|with the proper node.
|
|[ 0.000000] 0: 0x00100000 -> 0x00800000
|[ 0.000000] 1: 0x00800000 -> 0x01000000
|[ 0.000000] 0: 0x01000000 -> 0x01080000
|
|The problem is recent community kernel early_node_map[] shows
|only two entries with the node 0 entry overlapping the node 1
|entry.
|
| 0: 0x00100000 -> 0x01080000
| 1: 0x00800000 -> 0x01000000
After looking at the changelog, Found out that it has been broken for a while by
following commit
|commit 8716273caef7f55f39fe4fc6c69c5f9f197f41f1
|Author: David Rientjes <rientjes@google.com>
|Date: Fri Sep 25 15:20:04 2009 -0700
|
| x86: Export srat physical topology
Before that commit, register_active_regions() is called for every SRAT memory
entry right away.
Use nodememblk_range[] instead of nodes[] in order to make sure we
capture the actual memory blocks registered with each node. nodes[]
contains an extended range which spans all memory regions associated
with a node, but that does not mean that all the memory in between are
included.
Reported-by: Russ Anderson <rja@sgi.com>
Tested-by: Russ Anderson <rja@sgi.com>
Signed-off-by: Yinghai Lu <yinghai@kernel.org>
LKML-Reference: <4CB27BDF.5000800@kernel.org>
Acked-by: David Rientjes <rientjes@google.com>
Cc: <stable@kernel.org> 2.6.33 .34 .35 .36
Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
|
|
An earlier patch fixed the hwpoison fault handling to encode the
huge page size in the fault code of the page fault handler.
This is needed to report this information in SIGBUS to user space.
This is a straight forward patch to pass this information
through to the signal handling in the x86 specific fault.c
Cc: x86@kernel.org
Cc: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com>
Cc: fengguang.wu@intel.com
Signed-off-by: Andi Kleen <ak@linux.intel.com>
|
|
Merge reason: Update from -rc3 to -rc7.
Signed-off-by: Ingo Molnar <mingo@elte.hu>
|
|
Fold it into memblock_x86_find_in_range(), and change bad_addr_size()
to check_reserve_memblock().
So whole memblock_x86_find_in_range_size() code is more readable.
Signed-off-by: Yinghai Lu <yinghai@kernel.org>
LKML-Reference: <4CAA4DEC.4000401@kernel.org>
Signed-off-by: H. Peter Anvin <hpa@zytor.com>
|
|
Originally the only early reserved range that is overlapped with high
pages is "KVA RAM", but we already do remove that from the active ranges.
However, It turns out Xen could have that kind of overlapping to support memory
ballooning.x
So we need to make add_highpage_with_active_regions() to subtract
memblock reserved just like low ram; this is the proper design anyway.
In this patch, refactering get_freel_all_memory_range() to make it can
be used by add_highpage_with_active_regions(). Also we don't need to
remove "KVA RAM" from active ranges.
Signed-off-by: Yinghai Lu <yinghai@kernel.org>
LKML-Reference: <4CABB183.1040607@kernel.org>
Signed-off-by: H. Peter Anvin <hpa@zytor.com>
|
|
When operating on whole pages, use clear_page() and copy_page() in
favor of memset() and memcpy(); after all that's what they are
intended for.
Signed-off-by: Jan Beulich <jbeulich@novell.com>
LKML-Reference: <4C7FB8CA0200007800013F51@vpn.id2.novell.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
|
|
The file names are somehow misleading as the code is not specific to
AMD K8 CPUs anymore. The files accomodate code for other AMD CPU
northbridges as well.
Same is true for the config option which is valid for AMD CPU
northbridges in general and not specific to K8.
Signed-off-by: Andreas Herrmann <andreas.herrmann3@amd.com>
LKML-Reference: <20100917160343.GD4958@loge.amd.com>
Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
|
|
This patch fixes the sparse warnings when the return pointer of
iomap_atomic_prot_pfn() is used as an argument of iowrite32()
and friends.
Signed-off-by: Francisco Jerez <currojerez@riseup.net>
LKML-Reference: <1283633804-11749-1-git-send-email-currojerez@riseup.net>
Cc: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
|
|
This re-adds the lost chunk in commit 9b861528a80.
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Wu Fengguang <fengguang.wu@intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Haicheng Li <haicheng.li@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
LKML-Reference: <20100903090407.GA19771@localhost>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
|
|
Conflicts:
arch/x86/kernel/trampoline.c
mm/memblock.c
Merge reason: Resolve the conflicts, update to latest upstream.
Signed-off-by: Ingo Molnar <mingo@elte.hu>
|
|
The opcodes 0x2e and 0x3e are tested for in the first Group 2
line as well.
The sematic match that finds this problem is as follows:
(http://coccinelle.lip6.fr/)
// <smpl>
@expression@
expression E;
@@
(
* E
|| ... || E
|
* E
&& ... && E
)
// </smpl>
Signed-off-by: Julia Lawall <julia@diku.dk>
Reviewed-by: Pekka Enberg <penberg@cs.helsinki.fi>
Cc: Vegard Nossum <vegardno@ifi.uio.no>
LKML-Reference: <1283010066-20935-5-git-send-email-julia@diku.dk>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
|
|
Requested by Ingo, Thomas and HPA.
The old bootmem code is no longer necessary, and the transition is
complete. Remove it.
Signed-off-by: Yinghai Lu <yinghai@kernel.org>
Signed-off-by: H. Peter Anvin <hpa@zytor.com>
|
|
correct dma_reserve
memblock_memory_size() will return memory size in memblock.memory.region.
memblock_free_memory_size() will return free memory size in memblock.memory.region.
So We can get exact reseved size in specified range.
Set the size right after initmem_init(), because later bootmem API will
get area above 16M. (except some fallback).
Later after we remove the bootmem, We could call that just before paging_init().
Signed-off-by: Yinghai Lu <yinghai@kernel.org>
Signed-off-by: H. Peter Anvin <hpa@zytor.com>
|
|
1.include linux/memblock.h directly. so later could reduce e820.h reference.
2 this patch is done by sed scripts mainly
-v2: use MEMBLOCK_ERROR instead of -1ULL or -1UL
Signed-off-by: Yinghai Lu <yinghai@kernel.org>
Signed-off-by: H. Peter Anvin <hpa@zytor.com>
|
|
1. replace find_e820_area with memblock_find_in_range
2. replace reserve_early with memblock_x86_reserve_range
3. replace free_early with memblock_x86_free_range.
4. NO_BOOTMEM will switch to use memblock too.
5. use _e820, _early wrap in the patch, in following patch, will
replace them all
6. because memblock_x86_free_range support partial free, we can remove some special care
7. Need to make sure that memblock_find_in_range() is called after memblock_x86_fill()
so adjust some calling later in setup.c::setup_arch()
-- corruption_check and mptable_update
-v2: Move reserve_brk() early
Before fill_memblock_area, to avoid overlap between brk and memblock_find_in_range()
that could happen We have more then 128 RAM entry in E820 tables, and
memblock_x86_fill() could use memblock_find_in_range() to find a new place for
memblock.memory.region array.
and We don't need to use extend_brk() after fill_memblock_area()
So move reserve_brk() early before fill_memblock_area().
-v3: Move find_smp_config early
To make sure memblock_find_in_range not find wrong place, if BIOS doesn't put mptable
in right place.
-v4: Treat RESERVED_KERN as RAM in memblock.memory. and they are already in
memblock.reserved already..
use __NOT_KEEP_MEMBLOCK to make sure memblock related code could be freed later.
-v5: Generic version __memblock_find_in_range() is going from high to low, and for 32bit
active_region for 32bit does include high pages
need to replace the limit with memblock.default_alloc_limit, aka get_max_mapped()
-v6: Use current_limit instead
-v7: check with MEMBLOCK_ERROR instead of -1ULL or -1L
-v8: Set memblock_can_resize early to handle EFI with more RAM entries
-v9: update after kmemleak changes in mainline
Suggested-by: David S. Miller <davem@davemloft.net>
Suggested-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Suggested-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Yinghai Lu <yinghai@kernel.org>
Signed-off-by: H. Peter Anvin <hpa@zytor.com>
|
|
Also let memblock_x86_reserve_range/memblock_x86_free_range could print out name if memblock=debug is
specified
will also print ther name when reserve_memblock_area/free_memblock_area are called.
-v2: according to Ingo, put " if (memblock_debug) " in one place
Signed-off-by: Yinghai Lu <yinghai@kernel.org>
Signed-off-by: H. Peter Anvin <hpa@zytor.com>
|
|
It will return memory size in specified range according to memblock.memory.region
Try to share some code with memblock_x86_free_memory_in_range() by passing get_free to
__memblock_x86_memory_in_range().
-v2: Ben want _in_range in the name instead of size
Signed-off-by: Yinghai Lu <yinghai@kernel.org>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: H. Peter Anvin <hpa@zytor.com>
|
|
It will return free memory size in specified range.
We can not use memory_size - reserved_size here, because some reserved area
may not be in the scope of memblock.memory.region.
Use memblock.memory.region subtracting memblock.reserved.region to get free range array.
then count size of all free ranges.
-v2: Ben insist on using _in_range
Signed-off-by: Yinghai Lu <yinghai@kernel.org>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: H. Peter Anvin <hpa@zytor.com>
|
|
It can be used to find NODE_DATA for numa.
Need to make sure early_node_map[] is filled before it is called, otherwise
it will fallback to memblock_find_in_range(), with node range.
Signed-off-by: Yinghai Lu <yinghai@kernel.org>
Signed-off-by: H. Peter Anvin <hpa@zytor.com>
|
|
memblock_x86_hole_size()
memblock_x86_register_active_regions() will be used to fill early_node_map,
the result will be memblock.memory.region AND numa data
memblock_x86_hole_size will be used to find hole size on memblock.memory.region
with specified range.
Signed-off-by: Yinghai Lu <yinghai@kernel.org>
Signed-off-by: H. Peter Anvin <hpa@zytor.com>
|
|
get_free_all_memory_range is for CONFIG_NO_BOOTMEM=y, and will be called by
free_all_memory_core_early().
It will use early_node_map aka active ranges subtract memblock.reserved to
get all free range, and those ranges will convert to slab pages.
-v4: increase range size
Signed-off-by: Yinghai Lu <yinghai@kernel.org>
Cc: Jan Beulich <jbeulich@novell.com>
Signed-off-by: H. Peter Anvin <hpa@zytor.com>
|
|
They are wrappers for core versions, which take start/end/name instead
of base/size. This will make x86 conversion eaasier.
could add more debug print out
-v2: change get_max_mapped() to memblock.default_alloc_limit according to Michael
Ellerman and Ben
change to memblock_x86_reserve_range and memblock_x86_free_range according to Michael Ellerman
-v3: call check_and_double after reserve/free, so could avoid to use
find_memblock_area. Suggested by Michael Ellerman
Signed-off-by: Yinghai Lu <yinghai@kernel.org>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Michael Ellerman <michael@ellerman.id.au>
Signed-off-by: H. Peter Anvin <hpa@zytor.com>
|
