summaryrefslogtreecommitdiff
path: root/arch/x86/oprofile
AgeCommit message (Collapse)Author
2012-02-20x86: Factor out TIF_IA32 from 32-bit address spaceH. Peter Anvin
Factor out IA32 (compatibility instruction set) from 32-bit address space in the thread_info flags; this is a precondition patch for x32 support. Originally-by: H. J. Lu <hjl.tools@gmail.com> Signed-off-by: H. Peter Anvin <hpa@zytor.com> Link: http://lkml.kernel.org/n/tip-4pr1xnnksprt7t0h3w5fw4rv@git.kernel.org
2011-11-15Merge branch 'core' of git://amd64.org/linux/rric into perf/coreIngo Molnar
2011-11-08Merge branch 'perf/core' into oprofile/masterRobert Richter
Merge reason: Resolve conflicts with Don's NMI rework: commit 9c48f1c629ecfa114850c03f875c6691003214de Author: Don Zickus <dzickus@redhat.com> Date: Fri Sep 30 15:06:21 2011 -0400 x86, nmi: Wire up NMI handlers to new routines Conflicts: arch/x86/oprofile/nmi_timer_int.c Signed-off-by: Robert Richter <robert.richter@amd.com>
2011-11-04oprofile, x86: Reimplement nmi timer mode using perf eventRobert Richter
The legacy x86 nmi watchdog code was removed with the implementation of the perf based nmi watchdog. This broke Oprofile's nmi timer mode. To run nmi timer mode we relied on a continuous ticking nmi source which the nmi watchdog provided. The nmi tick was no longer available and current watchdog can not be used anymore since it runs with very long periods in the range of seconds. This patch reimplements the nmi timer mode using a perf counter nmi source. V2: * removing pr_info() * fix undefined reference to `__udivdi3' for 32 bit build * fix section mismatch of .cpuinit.data:nmi_timer_cpu_nb * removed nmi timer setup in arch/x86 * implemented function stubs for op_nmi_init/exit() * made code more readable in oprofile_init() V3: * fix architectural initialization in oprofile_init() * fix CONFIG_OPROFILE_NMI_TIMER dependencies Acked-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Signed-off-by: Robert Richter <robert.richter@amd.com>
2011-11-04oprofile, x86: Add kernel parameter oprofile.cpu_type=timerRobert Richter
We need this to better test x86 NMI timer mode. Otherwise it is very hard to setup systems with NMI timer enabled, but we have this e.g. in virtual machine environments. Signed-off-by: Robert Richter <robert.richter@amd.com>
2011-11-04oprofile, x86: Fix crash when unloading module (nmi timer mode)Robert Richter
If oprofile uses the nmi timer interrupt there is a crash while unloading the module. The bug can be triggered with oprofile build as module and kernel parameter nolapic set. This patch fixes this. oprofile: using NMI timer interrupt. BUG: unable to handle kernel NULL pointer dereference at 0000000000000008 IP: [<ffffffff8123c226>] unregister_syscore_ops+0x41/0x58 PGD 42dbca067 PUD 41da6a067 PMD 0 Oops: 0002 [#1] PREEMPT SMP CPU 5 Modules linked in: oprofile(-) [last unloaded: oprofile] Pid: 2518, comm: modprobe Not tainted 3.1.0-rc7-00019-gb2fb49d #19 Advanced Micro Device Anaheim/Anaheim RIP: 0010:[<ffffffff8123c226>] [<ffffffff8123c226>] unregister_syscore_ops+0x41/0x58 RSP: 0018:ffff88041ef71e98 EFLAGS: 00010296 RAX: 0000000000000000 RBX: ffffffffa0017100 RCX: dead000000200200 RDX: 0000000000000000 RSI: dead000000100100 RDI: ffffffff8178c620 RBP: ffff88041ef71ea8 R08: 0000000000000001 R09: 0000000000000082 R10: 0000000000000000 R11: ffff88041ef71de8 R12: 0000000000000080 R13: fffffffffffffff5 R14: 0000000000000001 R15: 0000000000610210 FS: 00007fc902f20700(0000) GS:ffff88042fd40000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 000000008005003b CR2: 0000000000000008 CR3: 000000041cdb6000 CR4: 00000000000006e0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400 Process modprobe (pid: 2518, threadinfo ffff88041ef70000, task ffff88041d348040) Stack: ffff88041ef71eb8 ffffffffa0017790 ffff88041ef71eb8 ffffffffa0013532 ffff88041ef71ec8 ffffffffa00132d6 ffff88041ef71ed8 ffffffffa00159b2 ffff88041ef71f78 ffffffff81073115 656c69666f72706f 0000000000610200 Call Trace: [<ffffffffa0013532>] op_nmi_exit+0x15/0x17 [oprofile] [<ffffffffa00132d6>] oprofile_arch_exit+0xe/0x10 [oprofile] [<ffffffffa00159b2>] oprofile_exit+0x1e/0x20 [oprofile] [<ffffffff81073115>] sys_delete_module+0x1c3/0x22f [<ffffffff811bf09e>] ? trace_hardirqs_on_thunk+0x3a/0x3f [<ffffffff8148070b>] system_call_fastpath+0x16/0x1b Code: 20 c6 78 81 e8 c5 cc 23 00 48 8b 13 48 8b 43 08 48 be 00 01 10 00 00 00 ad de 48 b9 00 02 20 00 00 00 ad de 48 c7 c7 20 c6 78 81 89 42 08 48 89 10 48 89 33 48 89 4b 08 e8 a6 c0 23 00 5a 5b RIP [<ffffffff8123c226>] unregister_syscore_ops+0x41/0x58 RSP <ffff88041ef71e98> CR2: 0000000000000008 ---[ end trace 43a541a52956b7b0 ]--- CC: stable@kernel.org # 2.6.37+ Signed-off-by: Robert Richter <robert.richter@amd.com>
2011-10-26Merge branch 'perf-core-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip * 'perf-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (121 commits) perf symbols: Increase symbol KSYM_NAME_LEN size perf hists browser: Refuse 'a' hotkey on non symbolic views perf ui browser: Use libslang to read keys perf tools: Fix tracing info recording perf hists browser: Elide DSO column when it is set to just one DSO, ditto for threads perf hists: Don't consider filtered entries when calculating column widths perf hists: Don't decay total_period for filtered entries perf hists browser: Honour symbol_conf.show_{nr_samples,total_period} perf hists browser: Do not exit on tab key with single event perf annotate browser: Don't change selection line when returning from callq perf tools: handle endianness of feature bitmap perf tools: Add prelink suggestion to dso update message perf script: Fix unknown feature comment perf hists browser: Apply the dso and thread filters when merging new batches perf hists: Move the dso and thread filters from hist_browser perf ui browser: Honour the xterm colors perf top tui: Give color hints just on the percentage, like on --stdio perf ui browser: Make the colors configurable and change the defaults perf tui: Remove unneeded call to newtCls on startup perf hists: Don't format the percentage on hist_entry__snprintf ... Fix up conflicts in arch/x86/kernel/kprobes.c manually. Ingo's tree did the insane "add volatile to const array", which just doesn't make sense ("volatile const"?). But we could remove the const *and* make the array volatile to make doubly sure that gcc doesn't optimize it away.. Also fix up kernel/trace/ring_buffer.c non-data-conflicts manually: the reader_lock has been turned into a raw lock by the core locking merge, and there was a new user of it introduced in this perf core merge. Make sure that new use also uses the raw accessor functions.
2011-10-10perf, x86: Implement IBS initializationRobert Richter
This patch implements IBS feature detection and initialzation. The code is shared between perf and oprofile. If IBS is available on the system for perf, a pmu is setup. Signed-off-by: Robert Richter <robert.richter@amd.com> Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Link: http://lkml.kernel.org/r/1316597423-25723-3-git-send-email-robert.richter@amd.com Signed-off-by: Ingo Molnar <mingo@elte.hu>
2011-10-10perf, x86: Share IBS macros between perf and oprofileRobert Richter
Moving IBS macros from oprofile to <asm/perf_event.h> to make it available to perf. No additional changes. Signed-off-by: Robert Richter <robert.richter@amd.com> Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Link: http://lkml.kernel.org/r/1316597423-25723-2-git-send-email-robert.richter@amd.com Signed-off-by: Ingo Molnar <mingo@elte.hu>
2011-10-10x86, nmi: Wire up NMI handlers to new routinesDon Zickus
Just convert all the files that have an nmi handler to the new routines. Most of it is straight forward conversion. A couple of places needed some tweaking like kgdb which separates the debug notifier from the nmi handler and mce removes a call to notify_die. [Thanks to Ying for finding out the history behind that mce call https://lkml.org/lkml/2010/5/27/114 And Boris responding that he would like to remove that call because of it https://lkml.org/lkml/2011/9/21/163] The things that get converted are the registeration/unregistration routines and the nmi handler itself has its args changed along with code removal to check which list it is on (most are on one NMI list except for kgdb which has both an NMI routine and an NMI Unknown routine). Signed-off-by: Don Zickus <dzickus@redhat.com> Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Acked-by: Corey Minyard <minyard@acm.org> Cc: Jason Wessel <jason.wessel@windriver.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Robert Richter <robert.richter@amd.com> Cc: Huang Ying <ying.huang@intel.com> Cc: Corey Minyard <minyard@acm.org> Cc: Jack Steiner <steiner@sgi.com> Link: http://lkml.kernel.org/r/1317409584-23662-4-git-send-email-dzickus@redhat.com Signed-off-by: Ingo Molnar <mingo@elte.hu>
2011-09-13locking, oprofile: Annotate oprofilefs lock as rawThomas Gleixner
The oprofilefs_lock can be taken in atomic context (in profiling interrupts) and therefore cannot cannot be preempted on -rt - annotate it. In mainline this change documents the low level nature of the lock - otherwise there's no functional difference. Lockdep and Sparse checking will work as usual. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2011-08-16oprofile, x86: Fix overflow and warning (commit 1d12d35)Robert Richter
Following fixes for: 1d12d35 oprofile, x86: Convert memory allocation to static array Fix potential buffer overflow. Fix the following warning: arch/x86/oprofile/op_model_ppro.c: In function ‘ppro_check_ctrs’: arch/x86/oprofile/op_model_ppro.c:143: warning: label ‘out’ defined but not used Cc: Maarten Lankhorst <m.b.lankhorst@gmail.com> Cc: Andi Kleen <andi@firstfloor.org> Signed-off-by: Robert Richter <robert.richter@amd.com>
2011-08-01oprofile, x86: Convert memory allocation to static arrayMaarten Lankhorst
On -rt, allocators don't work from atomic context any more, and the maximum size of the array is known at compile time. Call trace on a -rt kernel: oprofile: using NMI interrupt. BUG: sleeping function called from invalid context at kernel/rtmutex.c:645 in_atomic(): 1, irqs_disabled(): 1, pid: 0, name: kworker/0:1 Pid: 0, comm: kworker/0:1 Tainted: G C 3.0.0-rt3-patser+ #39 Call Trace: <IRQ> [<ffffffff8103fc0a>] __might_sleep+0xca/0xf0 [<ffffffff8160d424>] rt_spin_lock+0x24/0x40 [<ffffffff811476c7>] __kmalloc+0xc7/0x370 [<ffffffffa0275c85>] ? ppro_setup_ctrs+0x215/0x260 [oprofile] [<ffffffffa0273de0>] ? oprofile_cpu_notifier+0x60/0x60 [oprofile] [<ffffffffa0275c85>] ppro_setup_ctrs+0x215/0x260 [oprofile] [<ffffffffa0273de0>] ? oprofile_cpu_notifier+0x60/0x60 [oprofile] [<ffffffffa0273de0>] ? oprofile_cpu_notifier+0x60/0x60 [oprofile] [<ffffffffa0273ea4>] nmi_cpu_setup+0xc4/0x110 [oprofile] [<ffffffff81094455>] generic_smp_call_function_interrupt+0x95/0x190 [<ffffffff8101df77>] smp_call_function_interrupt+0x27/0x40 [<ffffffff81615093>] call_function_interrupt+0x13/0x20 <EOI> [<ffffffff8131d0c4>] ? plist_check_head+0x54/0xc0 [<ffffffff81371fe8>] ? intel_idle+0xc8/0x120 [<ffffffff81371fc7>] ? intel_idle+0xa7/0x120 [<ffffffff814a57b0>] cpuidle_idle_call+0xb0/0x230 [<ffffffff810011db>] cpu_idle+0x8b/0xe0 [<ffffffff815fc82f>] start_secondary+0x1d3/0x1d8 Signed-off-by: Maarten Lankhorst <m.b.lankhorst@gmail.com> Signed-off-by: Robert Richter <robert.richter@amd.com>
2011-07-21x86, perf: Make copy_from_user_nmi() a library functionRobert Richter
copy_from_user_nmi() is used in oprofile and perf. Moving it to other library functions like copy_from_user(). As this is x86 code for 32 and 64 bits, create a new file usercopy.c for unified code. Signed-off-by: Robert Richter <robert.richter@amd.com> Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Link: http://lkml.kernel.org/r/20110607172413.GJ20052@erda.amd.com Signed-off-by: Ingo Molnar <mingo@elte.hu>
2011-06-15oprofile, x86: Fix nmi-unsafe callgraph supportRobert Richter
Current oprofile's x86 callgraph support may trigger page faults throwing the BUG_ON(in_nmi()) message below. This patch fixes this by using the same nmi-safe copy-from-user code as in perf. ------------[ cut here ]------------ kernel BUG at .../arch/x86/kernel/traps.c:436! invalid opcode: 0000 [#1] SMP last sysfs file: /sys/devices/pci0000:00/0000:00:0a.0/0000:07:00.0/0000:08:04.0/net/eth0/broadcast CPU 5 Modules linked in: Pid: 8611, comm: opcontrol Not tainted 2.6.39-00007-gfe47ae7 #1 Advanced Micro Device Anaheim/Anaheim RIP: 0010:[<ffffffff813e8e35>] [<ffffffff813e8e35>] do_nmi+0x22/0x1ee RSP: 0000:ffff88042fd47f28 EFLAGS: 00010002 RAX: ffff88042c0a7fd8 RBX: 0000000000000001 RCX: 00000000c0000101 RDX: 00000000ffff8804 RSI: ffffffffffffffff RDI: ffff88042fd47f58 RBP: ffff88042fd47f48 R08: 0000000000000004 R09: 0000000000001484 R10: 0000000000000001 R11: 0000000000000000 R12: ffff88042fd47f58 R13: 0000000000000000 R14: ffff88042fd47d98 R15: 0000000000000020 FS: 00007fca25e56700(0000) GS:ffff88042fd40000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000000000074 CR3: 000000042d28b000 CR4: 00000000000006e0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400 Process opcontrol (pid: 8611, threadinfo ffff88042c0a6000, task ffff88042c532310) Stack: 0000000000000000 0000000000000001 ffff88042c0a7fd8 0000000000000000 ffff88042fd47de8 ffffffff813e897a 0000000000000020 ffff88042fd47d98 0000000000000000 ffff88042c0a7fd8 ffff88042fd47de8 0000000000000074 Call Trace: <NMI> [<ffffffff813e897a>] nmi+0x1a/0x20 [<ffffffff813f08ab>] ? bad_to_user+0x25/0x771 <<EOE>> Code: ff 59 5b 41 5c 41 5d c9 c3 55 65 48 8b 04 25 88 b5 00 00 48 89 e5 41 55 41 54 49 89 fc 53 48 83 ec 08 f6 80 47 e0 ff ff 04 74 04 <0f> 0b eb fe 81 80 44 e0 ff ff 00 00 01 04 65 ff 04 25 c4 0f 01 RIP [<ffffffff813e8e35>] do_nmi+0x22/0x1ee RSP <ffff88042fd47f28> ---[ end trace ed6752185092104b ]--- Kernel panic - not syncing: Fatal exception in interrupt Pid: 8611, comm: opcontrol Tainted: G D 2.6.39-00007-gfe47ae7 #1 Call Trace: <NMI> [<ffffffff813e5e0a>] panic+0x8c/0x188 [<ffffffff813e915c>] oops_end+0x81/0x8e [<ffffffff8100403d>] die+0x55/0x5e [<ffffffff813e8c45>] do_trap+0x11c/0x12b [<ffffffff810023c8>] do_invalid_op+0x91/0x9a [<ffffffff813e8e35>] ? do_nmi+0x22/0x1ee [<ffffffff8131e6fa>] ? oprofile_add_sample+0x83/0x95 [<ffffffff81321670>] ? op_amd_check_ctrs+0x4f/0x2cf [<ffffffff813ee4d5>] invalid_op+0x15/0x20 [<ffffffff813e8e35>] ? do_nmi+0x22/0x1ee [<ffffffff813e8e7a>] ? do_nmi+0x67/0x1ee [<ffffffff813e897a>] nmi+0x1a/0x20 [<ffffffff813f08ab>] ? bad_to_user+0x25/0x771 <<EOE>> Cc: John Lumby <johnlumby@hotmail.com> Cc: Maynard Johnson <maynardj@us.ibm.com> Cc: <stable@kernel.org> # .37+ Signed-off-by: Robert Richter <robert.richter@amd.com>
2011-06-15oprofile, x86: Fix race in nmi handler while starting countersRobert Richter
In some rare cases, nmis are generated immediately after the nmi handler of the cpu was started. This causes the counter not to be enabled. Before enabling the nmi handlers we need to set variable ctr_running first and make sure its value is written to memory. Also, the patch makes all existing barriers a memory barrier instead of a compiler barrier only. Reported-by: Suravee Suthikulpanit <suravee.suthikulpanit@amd.com> Cc: <stable@kernel.org> # .35+ Signed-off-by: Robert Richter <robert.richter@amd.com>
2011-06-08Merge branch 'urgent' of ↵Ingo Molnar
git://git.kernel.org/pub/scm/linux/kernel/git/rric/oprofile into perf/urgent
2011-05-30oprofile, x86: Add comments to IBS LVT offset initializationRobert Richter
Adding a comment in the code as IBS LVT setup is not obvious at all ... Signed-off-by: Robert Richter <robert.richter@amd.com>
2011-05-27Merge branch 'urgent' of ↵Ingo Molnar
git://git.kernel.org/pub/scm/linux/kernel/git/rric/oprofile into perf/urgent
2011-05-20oprofile, x86: Enable preemption during pci device setup in IBS initRobert Richter
IBS initialization is a mix of per-core register access and per-node pci device setup. Register access should be pinned to the cpu, but pci setup must run with preemption enabled. This patch better separates the code into non-/preemptible sections and fixes sleeping with preemption disabled. See bug message below. Fixes also freeing the eilvt entry by introducing put_eilvt(). BUG: sleeping function called from invalid context at mm/slub.c:824 in_atomic(): 1, irqs_disabled(): 0, pid: 32357, name: modprobe INFO: lockdep is turned off. Pid: 32357, comm: modprobe Not tainted 2.6.39-rc7+ #14 Call Trace: [<ffffffff8104bdc8>] __might_sleep+0x112/0x117 [<ffffffff81129693>] kmem_cache_alloc_trace+0x4b/0xe7 [<ffffffff81278f14>] kzalloc.constprop.0+0x29/0x2b [<ffffffff81278f4c>] pci_get_subsys+0x36/0x78 [<ffffffff81022689>] ? setup_APIC_eilvt+0xfb/0x139 [<ffffffff81278fa4>] pci_get_device+0x16/0x18 [<ffffffffa06c8b5d>] op_amd_init+0xd3/0x211 [oprofile] [<ffffffffa064d000>] ? 0xffffffffa064cfff [<ffffffffa064d298>] op_nmi_init+0x21e/0x26a [oprofile] [<ffffffffa064d062>] oprofile_arch_init+0xe/0x26 [oprofile] [<ffffffffa064d010>] oprofile_init+0x10/0x42 [oprofile] [<ffffffff81002099>] do_one_initcall+0x7f/0x13a [<ffffffff81096524>] sys_init_module+0x132/0x281 [<ffffffff814cc682>] system_call_fastpath+0x16/0x1b Reported-by: Dave Jones <davej@redhat.com> Cc: <stable@kernel.org> [2.6.37.x] Signed-off-by: Robert Richter <robert.richter@amd.com>
2011-05-12x86: Remove warning and warning_symbol from struct stacktrace_opsRichard Weinberger
Both warning and warning_symbol are nowhere used. Let's get rid of them. Signed-off-by: Richard Weinberger <richard@nod.at> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Huang Ying <ying.huang@intel.com> Cc: Soeren Sandmann Pedersen <ssp@redhat.com> Cc: Namhyung Kim <namhyung@gmail.com> Cc: x86 <x86@kernel.org> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Robert Richter <robert.richter@amd.com> Cc: Paul Mundt <lethal@linux-sh.org> Link: http://lkml.kernel.org/r/1305205872-10321-2-git-send-email-richard@nod.at Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
2011-03-29Merge branch 'core' of ↵Ingo Molnar
git://git.kernel.org/pub/scm/linux/kernel/git/rric/oprofile into perf/urgent
2011-03-24oprofile, x86: Allow setting EDGE/INV/CMASK for counter eventsAndi Kleen
For some performance events it's useful to set the EDGE and INV bits and the CMASK mask in the counter control register. The list of predefined events Intel releases for each CPU has some events which require these settings to get more "natural" to use higher level events. oprofile currently doesn't allow this. This patch adds new extra configuration fields for them, so that they can be specified in oprofilefs. An updated oprofile daemon can then make use of this to set them. v2: Write back masked extra value to variable. Signed-off-by: Andi Kleen <ak@linux.intel.com> Signed-off-by: Robert Richter <robert.richter@amd.com>
2011-03-23x86: Use syscore_ops instead of sysdev classes and sysdevsRafael J. Wysocki
Some subsystems in the x86 tree need to carry out suspend/resume and shutdown operations with one CPU on-line and interrupts disabled and they define sysdev classes and sysdevs or sysdev drivers for this purpose. This leads to unnecessarily complicated code and excessive memory usage, so switch them to using struct syscore_ops objects for this purpose instead. Generally, there are three categories of subsystems that use sysdevs for implementing PM operations: (1) subsystems whose suspend/resume callbacks ignore their arguments entirely (the majority), (2) subsystems whose suspend/resume callbacks use their struct sys_device argument, but don't really need to do that, because they can be implemented differently in an arguably simpler way (io_apic.c), and (3) subsystems whose suspend/resume callbacks use their struct sys_device argument, but the value of that argument is always the same and could be ignored (microcode_core.c). In all of these cases the subsystems in question may be readily converted to using struct syscore_ops objects for power management and shutdown. Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Acked-by: Ingo Molnar <mingo@elte.hu>
2011-03-18Merge branch 'x86-fixes-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip * 'x86-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: x86: Flush TLB if PGD entry is changed in i386 PAE mode x86, dumpstack: Correct stack dump info when frame pointer is available x86: Clean up csum-copy_64.S a bit x86: Fix common misspellings x86: Fix misspelling and align params x86: Use PentiumPro-optimized partial_csum() on VIA C7
2011-03-18x86, dumpstack: Correct stack dump info when frame pointer is availableNamhyung Kim
Current stack dump code scans entire stack and check each entry contains a pointer to kernel code. If CONFIG_FRAME_POINTER=y it could mark whether the pointer is valid or not based on value of the frame pointer. Invalid entries could be preceded by '?' sign. However this was not going to happen because scan start point was always higher than the frame pointer so that they could not meet. Commit 9c0729dc8062 ("x86: Eliminate bp argument from the stack tracing routines") delayed bp acquisition point, so the bp was read in lower frame, thus all of the entries were marked invalid. This patch fixes this by reverting above commit while retaining stack_frame() helper as suggested by Frederic Weisbecker. End result looks like below: before: [ 3.508329] Call Trace: [ 3.508551] [<ffffffff814f35c9>] ? panic+0x91/0x199 [ 3.508662] [<ffffffff814f3739>] ? printk+0x68/0x6a [ 3.508770] [<ffffffff81a981b2>] ? mount_block_root+0x257/0x26e [ 3.508876] [<ffffffff81a9821f>] ? mount_root+0x56/0x5a [ 3.508975] [<ffffffff81a98393>] ? prepare_namespace+0x170/0x1a9 [ 3.509216] [<ffffffff81a9772b>] ? kernel_init+0x1d2/0x1e2 [ 3.509335] [<ffffffff81003894>] ? kernel_thread_helper+0x4/0x10 [ 3.509442] [<ffffffff814f6880>] ? restore_args+0x0/0x30 [ 3.509542] [<ffffffff81a97559>] ? kernel_init+0x0/0x1e2 [ 3.509641] [<ffffffff81003890>] ? kernel_thread_helper+0x0/0x10 after: [ 3.522991] Call Trace: [ 3.523351] [<ffffffff814f35b9>] panic+0x91/0x199 [ 3.523468] [<ffffffff814f3729>] ? printk+0x68/0x6a [ 3.523576] [<ffffffff81a981b2>] mount_block_root+0x257/0x26e [ 3.523681] [<ffffffff81a9821f>] mount_root+0x56/0x5a [ 3.523780] [<ffffffff81a98393>] prepare_namespace+0x170/0x1a9 [ 3.523885] [<ffffffff81a9772b>] kernel_init+0x1d2/0x1e2 [ 3.523987] [<ffffffff81003894>] kernel_thread_helper+0x4/0x10 [ 3.524228] [<ffffffff814f6880>] ? restore_args+0x0/0x30 [ 3.524345] [<ffffffff81a97559>] ? kernel_init+0x0/0x1e2 [ 3.524445] [<ffffffff81003890>] ? kernel_thread_helper+0x0/0x10 -v5: * fix build breakage with oprofile -v4: * use 0 instead of regs->bp * separate out printk changes -v3: * apply comment from Frederic * add a couple of printk fixes Signed-off-by: Namhyung Kim <namhyung@gmail.com> Acked-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Acked-by: Frederic Weisbecker <fweisbec@gmail.com> Cc: Soren Sandmann <ssp@redhat.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Robert Richter <robert.richter@amd.com> LKML-Reference: <1300416006-3163-1-git-send-email-namhyung@gmail.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2011-01-19Kill off warning: ‘inline’ is not at beginning of declarationJesper Juhl
Fix a bunch of warning: ‘inline’ is not at beginning of declaration messages when building a 'make allyesconfig' kernel with -Wextra. These warnings are trivial to kill, yet rather annoying when building with -Wextra. The more we can cut down on pointless crap like this the better (IMHO). A previous patch to do this for a 'allnoconfig' build has already been merged. This just takes the cleanup a little further. Signed-off-by: Jesper Juhl <jj@chaosbits.net> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2011-01-11Merge branch 'perf-fixes-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip * 'perf-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: (28 commits) perf session: Fix infinite loop in __perf_session__process_events perf evsel: Support perf_evsel__open(cpus > 1 && threads > 1) perf sched: Use PTHREAD_STACK_MIN to avoid pthread_attr_setstacksize() fail perf tools: Emit clearer message for sys_perf_event_open ENOENT return perf stat: better error message for unsupported events perf sched: Fix allocation result check perf, x86: P4 PMU - Fix unflagged overflows handling dynamic debug: Fix build issue with older gcc tracing: Fix TRACE_EVENT power tracepoint creation tracing: Fix preempt count leak tracepoint: Add __rcu annotation tracing: remove duplicate null-pointer check in skb tracepoint tracing/trivial: Add missing comma in TRACE_EVENT comment tracing: Include module.h in define_trace.h x86: Save rbp in pt_regs on irq entry x86, dumpstack: Fix unused variable warning x86, NMI: Clean-up default_do_nmi() x86, NMI: Allow NMI reason io port (0x61) to be processed on any CPU x86, NMI: Remove DIE_NMI_IPI x86, NMI: Add priorities to handlers ...
2011-01-09Merge branch 'tip/perf/core' of ↵Ingo Molnar
git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-2.6-trace into perf/urgent
2011-01-07Merge branch 'for-2.6.38' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tj/percpu * 'for-2.6.38' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/percpu: (30 commits) gameport: use this_cpu_read instead of lookup x86: udelay: Use this_cpu_read to avoid address calculation x86: Use this_cpu_inc_return for nmi counter x86: Replace uses of current_cpu_data with this_cpu ops x86: Use this_cpu_ops to optimize code vmstat: User per cpu atomics to avoid interrupt disable / enable irq_work: Use per cpu atomics instead of regular atomics cpuops: Use cmpxchg for xchg to avoid lock semantics x86: this_cpu_cmpxchg and this_cpu_xchg operations percpu: Generic this_cpu_cmpxchg() and this_cpu_xchg support percpu,x86: relocate this_cpu_add_return() and friends connector: Use this_cpu operations xen: Use this_cpu_inc_return taskstats: Use this_cpu_ops random: Use this_cpu_inc_return fs: Use this_cpu_inc_return in buffer.c highmem: Use this_cpu_xx_return() operations vmstat: Use this_cpu_inc_return for vm statistics x86: Support for this_cpu_add, sub, dec, inc_return percpu: Generic support for this_cpu_add, sub, dec, inc_return ... Fixed up conflicts: in arch/x86/kernel/{apic/nmi.c, apic/x2apic_uv_x.c, process.c} as per Tejun.
2011-01-07x86, NMI: Remove DIE_NMI_IPIDon Zickus
With priorities in place and no one really understanding the difference between DIE_NMI and DIE_NMI_IPI, just remove DIE_NMI_IPI and convert everyone to DIE_NMI. This also simplifies default_do_nmi() a little bit. Instead of calling the die_notifier in both the if and else part, just pull it out and call it before the if-statement. This has the side benefit of avoiding a call to the ioport to see if there is an external NMI sitting around until after the (more frequent) internal NMIs are dealt with. Patch-Inspired-by: Huang Ying <ying.huang@intel.com> Signed-off-by: Don Zickus <dzickus@redhat.com> Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl> LKML-Reference: <1294348732-15030-5-git-send-email-dzickus@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2011-01-07x86, NMI: Add priorities to handlersDon Zickus
In order to consolidate the NMI die_chain events, we need to setup the priorities for the die notifiers. I started by defining a bunch of common priorities that can be used by the notifier blocks. Then I modified the notifier blocks to use the newly created priorities. Now that the priorities are straightened out, it should be easier to remove the event DIE_NMI_IPI. Signed-off-by: Don Zickus <dzickus@redhat.com> Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl> LKML-Reference: <1294348732-15030-4-git-send-email-dzickus@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2011-01-06Merge branch 'x86-mce-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip * 'x86-mce-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: apic, amd: Make firmware bug messages more meaningful mce, amd: Remove goto in threshold_create_device() mce, amd: Add helper functions to setup APIC mce, amd: Shorten local variables mci_misc_{hi,lo} mce, amd: Implement mce_threshold_block_init() helper function
2011-01-05Merge commit 'v2.6.37' into perf/coreIngo Molnar
Merge reason: Add the final .37 tree. Signed-off-by: Ingo Molnar <mingo@elte.hu>
2011-01-03arch/x86/oprofile/op_model_amd.c: Perform initialisation on a single CPURobert Richter
Disable preemption in init_ibs(). The function only checks the ibs capabilities and sets up pci devices (if necessary). It runs only on one cpu but operates with the local APIC and some MSRs, thus it is better to disable preemption. [ 7.034377] BUG: using smp_processor_id() in preemptible [00000000] code: modprobe/483 [ 7.034385] caller is setup_APIC_eilvt+0x155/0x180 [ 7.034389] Pid: 483, comm: modprobe Not tainted 2.6.37-rc1-20101110+ #1 [ 7.034392] Call Trace: [ 7.034400] [<ffffffff812a2b72>] debug_smp_processor_id+0xd2/0xf0 [ 7.034404] [<ffffffff8101e985>] setup_APIC_eilvt+0x155/0x180 [ ... ] Addresses https://bugzilla.kernel.org/show_bug.cgi?id=22812 Reported-by: <atswartz@gmail.com> Signed-off-by: Robert Richter <robert.richter@amd.com> Cc: oprofile-list@lists.sourceforge.net <oprofile-list@lists.sourceforge.net> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Rafael J. Wysocki <rjw@sisk.pl> Cc: Dan Carpenter <error27@gmail.com> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: <stable@kernel.org> [2.6.37.x] LKML-Reference: <20110103111514.GM4739@erda.amd.com> [ small cleanups ] Signed-off-by: Ingo Molnar <mingo@elte.hu>
2010-12-30x86: Replace uses of current_cpu_data with this_cpu opsTejun Heo
Replace all uses of current_cpu_data with this_cpu operations on the per cpu structure cpu_info. The scala accesses are replaced with the matching this_cpu ops which results in smaller and more efficient code. In the long run, it might be a good idea to remove cpu_data() macro too and use per_cpu macro directly. tj: updated description Cc: Yinghai Lu <yinghai@kernel.org> Cc: Ingo Molnar <mingo@elte.hu> Acked-by: H. Peter Anvin <hpa@zytor.com> Acked-by: Tejun Heo <tj@kernel.org> Signed-off-by: Christoph Lameter <cl@linux.com> Signed-off-by: Tejun Heo <tj@kernel.org>
2010-12-30x86: Use this_cpu_ops to optimize codeTejun Heo
Go through x86 code and replace __get_cpu_var and get_cpu_var instances that refer to a scalar and are not used for address determinations. Cc: Yinghai Lu <yinghai@kernel.org> Cc: Ingo Molnar <mingo@elte.hu> Acked-by: Tejun Heo <tj@kernel.org> Acked-by: "H. Peter Anvin" <hpa@zytor.com> Signed-off-by: Christoph Lameter <cl@linux.com> Signed-off-by: Tejun Heo <tj@kernel.org>
2010-12-30Merge branch 'core' of ↵Ingo Molnar
git://git.kernel.org/pub/scm/linux/kernel/git/rric/oprofile into perf/core
2010-12-22x86, nmi_watchdog: Remove ARCH_HAS_NMI_WATCHDOG and rely on ↵Don Zickus
CONFIG_HARDLOCKUP_DETECTOR The x86 arch has shifted its use of the nmi_watchdog from a local implementation to the global one provide by kernel/watchdog.c. This shift has caused a whole bunch of compile problems under different config options. I attempt to simplify things with the patch below. In order to simplify things, I had to come to terms with the meaning of two terms ARCH_HAS_NMI_WATCHDOG and CONFIG_HARDLOCKUP_DETECTOR. Basically they mean the same thing, the former on a local level and the latter on a global level. With the old x86 nmi watchdog gone, there is no need to rely on defining the ARCH_HAS_NMI_WATCHDOG variable because it doesn't make sense any more. x86 will now use the global implementation. The changes below do a few things. First it changes the few places that relied on ARCH_HAS_NMI_WATCHDOG to use CONFIG_X86_LOCAL_APIC (the former was an alias for the latter anyway, so nothing unusual here). Those pieces of code were relying more on local apic functionality the nmi watchdog functionality, so the change should make sense. Second, I removed the x86 implementation of touch_nmi_watchdog(). It isn't need now, instead x86 will rely on kernel/watchdog.c's implementation. Third, I removed the #define ARCH_HAS_NMI_WATCHDOG itself from x86. And tweaked the include/linux/nmi.h file to tell users to look for an externally defined touch_nmi_watchdog in the case of ARCH_HAS_NMI_WATCHDOG _or_ CONFIG_HARDLOCKUP_DETECTOR. This changes removes some of the ugliness in that file. Finally, I added a Kconfig dependency for CONFIG_HARDLOCKUP_DETECTOR that said you can't have ARCH_HAS_NMI_WATCHDOG _and_ CONFIG_HARDLOCKUP_DETECTOR. You can only have one nmi_watchdog. Tested with ARCH=i386: allnoconfig, defconfig, allyesconfig, (various broken configs) ARCH=x86_64: allnoconfig, defconfig, allyesconfig, (various broken configs) Hopefully, after this patch I won't get any more compile broken emails. :-) v3: changed a couple of 'linux/nmi.h' -> 'asm/nmi.h' to pick-up correct function prototypes when CONFIG_HARDLOCKUP_DETECTOR is not set. Signed-off-by: Don Zickus <dzickus@redhat.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: fweisbec@gmail.com LKML-Reference: <1293044403-14117-1-git-send-email-dzickus@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2010-12-19oprofile, x86: Add support for 6 counters (AMD family 15h)Robert Richter
This patch adds support for up to 6 hardware counters for AMD family 15h cpus. There is a new MSR range for hardware counters beginning at MSRC001_0200 Performance Event Select (PERF_CTL0). Signed-off-by: Robert Richter <robert.richter@amd.com>
2010-12-19oprofile, x86: Add support for AMD family 15hRobert Richter
This patch adds support for AMD family 15h (Interlagos/Valencia/ Zambezi) cpus. Signed-off-by: Robert Richter <robert.richter@amd.com>
2010-11-18Merge branch 'perf/core' of ↵Ingo Molnar
git://git.kernel.org/pub/scm/linux/kernel/git/frederic/random-tracing into perf/core
2010-11-18x86: Eliminate bp argument from the stack tracing routinesSoeren Sandmann Pedersen
The various stack tracing routines take a 'bp' argument in which the caller is supposed to provide the base pointer to use, or 0 if doesn't have one. Since bp is garbage whenever CONFIG_FRAME_POINTER is not defined, this means all callers in principle should either always pass 0, or be conditional on CONFIG_FRAME_POINTER. However, there are only really three use cases for stack tracing: (a) Trace the current task, including IRQ stack if any (b) Trace the current task, but skip IRQ stack (c) Trace some other task In all cases, if CONFIG_FRAME_POINTER is not defined, bp should just be 0. If it _is_ defined, then - in case (a) bp should be gotten directly from the CPU's register, so the caller should pass NULL for regs, - in case (b) the caller should should pass the IRQ registers to dump_trace(), - in case (c) bp should be gotten from the top of the task's stack, so the caller should pass NULL for regs. Hence, the bp argument is not necessary because the combination of task and regs is sufficient to determine an appropriate value for bp. This patch introduces a new inline function stack_frame(task, regs) that computes the desired bp. This function is then called from the two versions of dump_stack(). Signed-off-by: Soren Sandmann <ssp@redhat.com> Acked-by: Steven Rostedt <rostedt@goodmis.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Ingo Molnar <mingo@redhat.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Arjan van de Ven <arjan@infradead.org>, Cc: Frederic Weisbecker <fweisbec@gmail.com>, Cc: Arnaldo Carvalho de Melo <acme@redhat.com>, LKML-Reference: <m3oc9rop28.fsf@dhcp-100-3-82.bos.redhat.com>> Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
2010-11-18x86, nmi_watchdog: Remove all stub function calls from old nmi_watchdogDon Zickus
Now that the bulk of the old nmi_watchdog is gone, remove all the stub variables and hooks associated with it. This touches lots of files mainly because of how the io_apic nmi_watchdog was implemented. Now that the io_apic nmi_watchdog is forever gone, remove all its fingers. Most of this code was not being exercised by virtue of nmi_watchdog != NMI_IO_APIC, so there shouldn't be anything to risky here. Signed-off-by: Don Zickus <dzickus@redhat.com> Cc: fweisbec@gmail.com Cc: gorcunov@openvz.org LKML-Reference: <1289578944-28564-3-git-send-email-dzickus@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2010-10-25Merge branch 'x86' of ↵Ingo Molnar
git://git.kernel.org/pub/scm/linux/kernel/git/rric/oprofile into perf/urgent
2010-10-25apic, amd: Make firmware bug messages more meaningfulRobert Richter
This improves error messages in case the BIOS was setting up wrong LVT offsets. Signed-off-by: Robert Richter <robert.richter@amd.com> Acked-by: Borislav Petkov <borislav.petkov@amd.com> LKML-Reference: <1288015419-29543-6-git-send-email-robert.richter@amd.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2010-10-25Merge branch 'oprofile/core' into oprofile/x86Robert Richter
Conflicts: arch/x86/oprofile/op_model_amd.c Signed-off-by: Robert Richter <robert.richter@amd.com>
2010-10-25x86/oprofile: Fix uninitialized variable use in debug printkIngo Molnar
Stephen Rothwell reported this build warning: arch/x86/oprofile/op_model_amd.c: In function 'ibs_eilvt_valid': arch/x86/oprofile/op_model_amd.c:289: warning: 'offset' may be used uninitialized in this function And correctly observed that indeed the variable is used uninitialized in this function. The result of this bug can be a debug printk with a bogus value. Also fix a few more small details that made this function hard to read and which probably contributed to the bug being introduced to begin with: - Use more symmetric error conditions - Remove the !0 obfuscation - Add newlines to the printk output - Remove bogus linebreaks in printk strings and elsewhere Reported-by: Stephen Rothwell <sfr@canb.auug.org.au> Cc: Robert Richter <robert.richter@amd.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> LKML-Reference: <20101025115736.41d51abe.sfr@canb.auug.org.au> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2010-10-21Merge branch 'irq-core-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip * 'irq-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: (96 commits) apic, x86: Use BIOS settings for IBS and MCE threshold interrupt LVT offsets apic, x86: Check if EILVT APIC registers are available (AMD only) x86: ioapic: Call free_irte only if interrupt remapping enabled arm: Use ARCH_IRQ_INIT_FLAGS genirq, ARM: Fix boot on ARM platforms genirq: Fix CONFIG_GENIRQ_NO_DEPRECATED=y build x86: Switch sparse_irq allocations to GFP_KERNEL genirq: Switch sparse_irq allocator to GFP_KERNEL genirq: Make sparse_lock a mutex x86: lguest: Use new irq allocator genirq: Remove the now unused sparse irq leftovers genirq: Sanitize dynamic irq handling genirq: Remove arch_init_chip_data() x86: xen: Sanitise sparse_irq handling x86: Use sane enumeration x86: uv: Clean up the direct access to irq_desc x86: Make io_apic.c local functions static genirq: Remove irq_2_iommu x86: Speed up the irq_remapped check in hot pathes intr_remap: Simplify the code further ... Fix up trivial conflicts in arch/x86/Kconfig
2010-10-20apic, x86: Use BIOS settings for IBS and MCE threshold interrupt LVT offsetsRobert Richter
We want the BIOS to setup the EILVT APIC registers. The offsets were hardcoded and BIOS settings were overwritten by the OS. Now, the subsystems for MCE threshold and IBS determine the LVT offset from the registers the BIOS has setup. If the BIOS setup is buggy on a family 10h system, a workaround enables IBS. If the OS determines an invalid register setup, a "[Firmware Bug]: " error message is reported. We need this change also for upcomming cpu families. Signed-off-by: Robert Richter <robert.richter@amd.com> LKML-Reference: <1286360874-1471-3-git-send-email-robert.richter@amd.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
generated by cgit v1.2.3 (git 2.39.1) at 2024-11-01 17:24:08 +0000