summaryrefslogtreecommitdiff
path: root/arch
AgeCommit message (Collapse)Author
2007-04-27[MIPS] JMR3927 cleanupAtsushi Nemoto
* Kill dead codes * Rearrange irq chip handlers * Minimize defconfig Signed-off-by: Atsushi Nemoto <anemo@mba.ocn.ne.jp> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2007-04-27[MIPS] merge GT64111 PCI routines and GT64120 PCI_0 routinesYoichi Yuasa
This patch has merged GT64111 PCI routines and GT64120 PCI_0 routines. GT64111 PCI is almost the same as GT64120's PCI_0. This patch don't change GT64120 PCI routines. Signed-off-by: Yoichi Yuasa <yoichi_yuasa@tripeaks.co.jp> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2007-04-27[MIPS] Cobalt: Split PCI codes from setup.cYoichi Yuasa
It's removed #ifdef CONFIG_PCI/#endif from cobalt setup.c . Signed-off-by: Yoichi Yuasa <yoichi_yuasa@tripeaks.co.jp> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2007-04-27[MIPS] Cobalt: clean up include filesYoichi Yuasa
Signed-off-by: Yoichi Yuasa <yoichi_yuasa@tripeaks.co.jp>
2007-04-27[MIPS] Fix AP/SP to work in the reality of modern kernels.Ralf Baechle
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2007-04-27[S390] Clean up smp code in preparation for some larger changes.Heiko Carstens
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com> Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
2007-04-27[S390] Remove debugging junk.Martin Schwidefsky
arch/s390/appldata/appldata_base.c has some confusing debugging code left over to allow compiling it as a module. In practice, it cannot be configured as module and there is no need to keep that code. Signed-off-by: Gerald Schaefer <geraldsc@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2007-04-27[S390] Switch etr from tasklet to workqueue.Martin Schwidefsky
The clock synchronization of the ETR code requires an smp_call_function to synchronize all cpus. Calling smp_call_function from a tasklet is illegal. Replace the tasklet with a job on the global workqueue. ETR work is rare and can be postponed to a be done by a kernel thread. Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2007-04-27[S390] Processor degradation notification.Heiko Carstens
Generate uevents for all cpus if cpu capability changes. This can happen e.g. because the cpus are overheating. The cpu capability can be read via /sys/devices/system/cpu/cpuN/capability. Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com> Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
2007-04-27[S390] vtime: cleanup per_cpu usage.Jan Glauber
Replace per_cpu(... , smp_processor_id()) with __get_cpu_var() Signed-off-by: Jan Glauber <jan.glauber@de.ibm.com> Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2007-04-27[S390] crypto: cleanup.Jan Glauber
Cleanup code and remove obsolete documentation. Signed-off-by: Jan Glauber <jan.glauber@de.ibm.com> Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2007-04-27[S390] zfcpdump support.Michael Holzheu
s390 machines provide hardware support for creating Linux dumps on SCSI disks. For creating a dump a special purpose dump Linux is used. The first 32 MB of memory are saved by the hardware before the dump Linux is booted. Via an SCLP interface, the saved memory can be accessed from Linux. This patch exports memory and registers of the crashed Linux to userspace via a debugfs file. For more information refer to Documentation/s390/zfcpdump.txt, which is included in this patch. Signed-off-by: Michael Holzheu <holzheu@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com> Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
2007-04-27[S390] Improved kernel stack overflow checking.Martin Schwidefsky
Recent cvs versions of gcc have support for an improved stack overflow checking that calculates the size of the guard size for each function. If the compiler accepts -mstack-size without -mstack-guard then the new stack check is available. We always want to use the new stack checker. Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com> Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
2007-04-27[S390] No execute support cleanup.Martin Schwidefsky
Simplify the signal_return function that checks for the two special system calls sigreturn and rt_sigreturn. No need to do a page table walk, a call to copy_from_user while disabled page faults will work as well. Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com> Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
2007-04-27[S390] Minor fault path optimization.Martin Schwidefsky
The minor fault path has grown a lot in terms of cycles. In particular the kprobes hook is very costly. Optimize the path to save a couple of cycles. If kprobes is enabled more than 300 cycles can be avoided if kprobes_running() is false. Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com> Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
2007-04-27[S390] Use generic bug.Heiko Carstens
Generic bug implementation for s390. Will increase the value of the console output on BUG() statements since registers r0-r5,r14 will not be clobbered by a printk() call that was previously done before the illegal instruction of BUG() was hit. Also implements an architecture specific WARN_ON(). Output of that could be increased but requires common code change. Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com> Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
2007-04-27[S390] Improved oops output.Martin Schwidefsky
This patch adds two improvements to the oops output. First it adds an additional line after the PSW which decodes the different fields of it. Second a disassembler is added that decodes the instructions surrounding the faulting PSW. The output of a test oops now looks like this: kernel BUG at init/main.c:419 illegal operation: 0001 [#1] CPU: 0 Not tainted Process swapper (pid: 0, task: 0000000000464968, ksp: 00000000004be000) Krnl PSW : 0700000180000000 00000000000120b6 (rest_init+0x36/0x38) R:0 T:1 IO:1 EX:1 Key:0 M:0 W:0 P:0 AS:0 CC:0 PM:0 EA:3 Krnl GPRS: 0000000000000003 00000000004ba017 0000000000000022 0000000000000001 000000000003a5f6 0000000000000000 00000000004be6a8 0000000000000000 0000000000000000 00000000004b8200 0000000000003a50 0000000000008000 0000000000516368 000000000033d008 00000000000120b2 00000000004bdee0 Krnl Code: 00000000000120a6: e3e0f0980024 stg %r14,152(%r15) 00000000000120ac: c0e500014296 brasl %r14,3a5d8 00000000000120b2: a7f40001 brc 15,120b4 >00000000000120b6: 0707 bcr 0,%r7 00000000000120b8: eb7ff0500024 stmg %r7,%r15,80(%r15) 00000000000120be: c0d000195825 larl %r13,33d108 00000000000120c4: a7f13f00 tmll %r15,16128 00000000000120c8: a7840001 brc 8,120ca Call Trace: ([<00000000000120b2>] rest_init+0x32/0x38) [<00000000004be614>] start_kernel+0x37c/0x410 [<0000000000012020>] _ehead+0x20/0x80 Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com> Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
2007-04-27[S390] System call cleanup.Martin Schwidefsky
Remove system call glue for sys_clone, sys_fork, sys_vfork, sys_execve, sys_sigreturn, sys_rt_sigreturn and sys_sigaltstack. Call do_execve from kernel_execve directly, move pt_regs to the right place and branch to sysc_return to start the user space program. This removes the last in-kernel system call. Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com> Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
2007-04-27[S390] cio/ipl: Clean interface between cio and ipl code.Heiko Carstens
Clean interface between cio and ipl code, so Peter stops complaining. Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com> Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
2007-04-27[S390] memory detection: stop at first memory hole.Heiko Carstens
If both sclp and diag memory detection don't work stop at the first memory hole. Otherwise the code might loop forever... Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com> Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
2007-04-27AVR32: Remove useless config option "GENERIC_BUST_SPINLOCK".Robert P. J. Day
Remove the clearly useless config option GENERIC_BUST_SPINLOCK, which is not used anywhere in the tree. Signed-off-by: Robert P. J. Day <rpjday@mindspring.com> Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
2007-04-27[AVR32] Optimize the TLB miss handlerHaavard Skinnemoen
Reorder some instructions and change the register usage to reduce the number of pipeline stalls. Also use the bfextu and bfins instructions for bitfield manipulations instead of shifting and masking. This makes gzipping a 80MB file approximately 2% faster. Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
2007-04-27[AVR32] Board code for ATNGW100Haavard Skinnemoen
Add board code and defconfig for the ATNGW100 Network Gateway kit. For more information about this board, see http://www.atmel.com/dyn/products/tools_card.asp?tool_id=4102 Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
2007-04-27[AVR32] Get rid of board_setup_fbmem()Haavard Skinnemoen
Since the core setup code takes care of both allocation and reservation of framebuffer memory, there's no need for this board- specific hook anymore. Replace it with two global variables, fbmem_start and fbmem_size, which can be used directly. Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
2007-04-27[AVR32] Reserve framebuffer memory in early_parse_fbmem()Haavard Skinnemoen
With the current strategy of using the bootmem allocator to allocate or reserve framebuffer memory, there's a slight chance that the requested area has been taken by the boot allocator bitmap before we get around to reserving it. By inserting the framebuffer region as a reserved region as early as possible, we improve our chances for success and we make the region visible as a reserved region in dmesg and /proc/iomem without any extra work. Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
2007-04-27[AVR32] Simplify early handling of memory regionsHaavard Skinnemoen
Use struct resource to specify both physical memory regions and reserved regions and push everything into the same framework, including kernel code/data and initrd memory. This allows us to get rid of many special cases in the bootmem initialization and will also make it easier to implement more robust handling of framebuffer memory later. Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
2007-04-27[AVR32] Move setup_bootmem() from mm/init.c to kernel/setup.cHaavard Skinnemoen
Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
2007-04-27[AVR32] Make I/O access macros work with external devicesHaavard Skinnemoen
Fix the I/O access macros so that they work with externally connected devices accessed in little-endian mode over any bus width: * Use a set of macros to define I/O port- and memory operations borrowed from MIPS. * Allow subarchitecture to specify address- and data-mangling * Implement at32ap-specific port mangling (with build-time configurable bus width. Only one bus width at a time supported for now.) * Rewrite iowriteN and friends to use write[bwl] and friends (not the __raw counterparts.) This has been tested using pata_pcmcia to access a CompactFlash card connected to the EBI (16-bit bus width.) Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
2007-04-27[AVR32] Fix NMI handlerHaavard Skinnemoen
Fix a problem with the NMI handler entry code related to the NMI handler sharing some code with the exception handlers. This is not a good idea because the RSR and RAR registers are not the same, and the NMI handler runs with interrupts masked the whole time so there's no need to check for pending work. Open-code the low-level NMI handling logic instead so that the pt_regs layout is actually correct when the higher-level handler is called. Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
2007-04-27[AVR32] Clean up exception handling codeHaavard Skinnemoen
* Use generic BUG() handling * Remove some useless debug statements * Use a common function _exception() to send signals or oops when an exception can't be handled. This makes sure init doesn't enter an infinite exception loop as well. Borrowed from powerpc. * Add some basic exception tracing support to the page fault code. * Rework dump_stack(), show_regs() and friends and move everything into process.c * Print information about configuration options and chip type when oopsing Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
2007-04-27[AVR32] Clean up cpu identification and add features bitmapHaavard Skinnemoen
Clean up the cpu identification code, using definitions from <asm/sysreg.h> instead of hardcoded constants. Also, add a features bitmap to struct avr32_cpuinfo to allow other code to make decisions based upon what the running cpu is actually capable of. Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
2007-04-27[AVR32] Don't enable clocks with no usersHaavard Skinnemoen
Bring the code that sets the initial PM clock masks in line with the comment preceding it by only enabling clocks that have users != 0. Fix SM clock definition and avr32_hpt_init() so that the SM and TC0 clocks keep ticking. Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
2007-04-27[AVR32] Put cpu in sleep 0 when idle.Hans-Christian Egtvedt
This patch puts the CPU in sleep 0 when doing nothing, idle. This will turn of the CPU clock and thus save power. The CPU is waken again when an interrupt occurs. Signed-off-by: Hans-Christian Egtvedt <hcegtvedt@atmel.com> Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
2007-04-27[AVR32] Change system timer from count-compare to Timer/Counter 0Hans-Christian Egtvedt
Due to limitation of the count-compare system timer (not able to count when CPU is in sleep), the system timer had to be changed to use a peripheral timer/counter. The old COUNT-COMPARE code is still present in time.c as weak functions. The new timer is added to the architecture directory. This patch sets up TC0 as system timer The new timer has been tested on AT32AP7000/ATSTK1000 at 100 Hz, 250 Hz, 300 Hz and 1000 Hz. For more details about the timer/counter see the datasheet for AT32AP700x available at http://www.atmel.com/dyn/products/product_card.asp?part_id=3903 Signed-off-by: Hans-Christian Egtvedt <hcegtvedt@atmel.com> Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
2007-04-27[AVR32] Add mach-specific KconfigHaavard Skinnemoen
Include at32ap-specific Kconfig file from top-level Kconfig file. The at32ap Kconfig is currently empty, but it will grow some machine- specific options soon. Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
2007-04-27[AVR32] Add nwait and tdf parameters to SMC configurationHans-Christian Egtvedt
Complete the SMC configuration code by adding nwait and tdf parameter. After this change, we support the same parameters as the hardware. Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
2007-04-27[POWERPC] Generic check_legacy_ioportOlaf Hering
check_legacy_ioport makes only sense on PREP, CHRP and pSeries. They may have an isa node with PS/2, parport, floppy and serial ports. Remove the check_legacy_ioport call from ppc_md, it's not needed anymore. Hardware capabilities come from the device-tree. Signed-off-by: Olaf Hering <olaf@aepfle.de> Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-04-27[POWERPC] bootwrapper: cuboot-83xx: Exclude upper 1MB from heap.Scott Wood
The uppermost part of memory is where u-boot puts the stack, so don't include that in the heap. It's not currently causing problems, as the current code allocates from the bottom of the heap, but this will keep things from potentially breaking if a future implementation were to allocate from the top. Signed-off-by: Scott Wood <scottwood@freescale.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-04-27[POWERPC] bootwrapper: cuImage for 85xxScott Wood
Signed-off-by: Scott Wood <scottwood@freescale.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-04-27[POWERPC] bootwrapper: Fix array handling in dt_xlate_reg().Scott Wood
This fixes a few bugs in how dt_xlate_reg() handles address arrays: 1. copy_val() was copying into the wrong end of the array, resulting in random stack garbage at the other end. 2. dt_xlate_reg() was getting the result from the wrong end of the array. 3. add_reg() and sub_reg() were treating the arrays as little-endian rather than big-endian. 4. add_reg() only returned an error on a carry out of the entire array, rather than out of the naddr portion. 5. The requested reg resource was checked to see if it exceeded the size of the reg property, but not to see if it exceeded the size of the buffer. Signed-off-by: Scott Wood <scottwood@freescale.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-04-27[POWERPC] boot: More verbose gunzip error messageMilton Miller
Change the error message in gunzip_exactly to be more verbose. Besides the identifier being unrelated to the current function name, the user had no indication if the corruption was near the beginning or the end. Signed-off-by: Milton Miller <miltonm@bga.com> Acked-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-04-27[POWERPC] Enable make installAkinobu Mita
make help on powerpc says make install is available. But it failed due to no rule to make install. This patch enables make install to work. Signed-off-by: Akinobu Mita <mita@fixstars.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-04-27[POWERPC] Always use -mno-stringBenjamin Herrenschmidt
The string load/store instructions are unimplemented on some processors and slow (microcoded) on some others. It's simplest to just not use them at all. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-04-27[POWERPC] Fix WARN_ON when entering xmonAnton Blanchard
Whenever we enter xmon we get a WARN_ON out of the rtas code since it thinks interrupts are still on: Unable to handle kernel paging request for data at address 0x00000000 Faulting instruction address: 0xd000000000080008 cpu 0x3: Vector: 300 (Data Access) at [c0000000075dba00] pc: d000000000080008: .doit+0x8/0x40 [oopser] lr: c000000000077704: .sys_init_module+0x1664/0x1824 sp: c0000000075dbc80 msr: 9000000000009032 dar: 0 dsisr: 42000000 current = 0xc000000003fa64b0 paca = 0xc000000000694280 pid = 2260, comm = insmod ------------[ cut here ]------------ Badness at arch/powerpc/kernel/entry_64.S:651 Call Trace: [C0000000075DAE70] [C00000000000EB64] .show_stack+0x68/0x1b0 (unreliable) [C0000000075DAF10] [C000000000216254] .report_bug+0x94/0xe8 [C0000000075DAFA0] [C00000000047B140] __kprobes_text_start+0x178/0x584 [C0000000075DB040] [C0000000000044F4] program_check_common+0xf4/0x100 Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-04-27[POWERPC] Replace if-then-else with a switch statementWill Schmidt
Convert a compound if-else blob to a switch statement. This better fits the kernel coding style. Signed-off-by: Will Schmidt <will_schmidt@vnet.ibm.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-04-27[AVR32] Add basic HMATRIX supportHaavard Skinnemoen
This adds register and clock definitions for the High-speed bus Matrix (HMATRIX) as well as a function that can be used to configure special EBI functionality like CompactFlash and NAND flash support. Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
2007-04-27[POWERPC] pasemi: Cpufreq driverOlof Johansson
Cpufreq driver for PA Semi PWRficient processors. Signed-off-by: Egor Martovetsky <egor@pasemi.com> Signed-off-by: Olof Johansson <olof@lixom.net> Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-04-27[POWERPC] pasemi: Kconfig for gpio_mdioOlof Johansson
arch/powerpc/platforms/pasemi/gpio_mdio.c really depends on CONFIG_PHYLIB. Add a config option for it, allow for it to be disabled if needed and fix the dependency. Signed-off-by: Olof Johansson <olof@lixom.net> Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-04-27[POWERPC] pasemi: Remove build warningOlof Johansson
arch/powerpc/platforms/pasemi/setup.c: In function 'pasemi_publish_devices': arch/powerpc/platforms/pasemi/setup.c:220: warning: implicit declaration of function 'of_platform_bus_probe' Signed-off-by: Olof Johansson <olof@lixom.net> Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-04-26[SPARC64]: Convert PCI over to generic struct iommu/strbuf.David S. Miller
Signed-off-by: David S. Miller <davem@davemloft.net>
generated by cgit v1.2.3 (git 2.39.1) at 2024-08-02 18:52:13 +0000