summaryrefslogtreecommitdiff
path: root/arch
AgeCommit message (Collapse)Author
2011-12-02mach-ux500: mcde: Change default color for hdmi fb.John Fredriksson
mach-ux500: mcde: Change pixel format to RGB565 to make mali graphics work. Signed-off-by: John Fredriksson <john.xj.fredriksson@stericsson.com>
2011-11-23ux500: Detect accelerometer i2c address on snowballRobert Marklund
Snowball V7 and above the accelerometer changed i2c address and there is now way to detect that in runtime. So between V7 and V10 we need to probe for the right address. Change-Id: I39528ca40952a8a868b7aff6c3abd7668420850d Signed-off-by: Robert Marklund <robert.marklund@stericsson.com>
2011-11-07ux500: Add lps001wp driver consumerRobert Marklund
Add the lps001wp as a consumer of VAUX1, the device name is a little bad maybe have to be fixed later on. Change-Id: Ie38b86383d5d1eac5862e3f5d999639d407702f3 Signed-off-by: Robert Marklund <robert.marklund@stericsson.com> Reviewed-on: http://gerrit.lud.stericsson.com/gerrit/35832 Reviewed-by: Philippe LANGLAIS <philippe.langlais@stericsson.com>
2011-10-27config: minimize the defconfig againRobert Marklund
Change-Id: If872084fce0c37126f9196a70c0f76db1c4cf37c Signed-off-by: Robert Marklund <robert.marklund@stericsson.com>
2011-10-27arm: u5500: Enable 32bpp for primary displayJayarami Reddy
ST-Ericsson ID: 361885 ST-Ericsson Linux next: NA ST-Ericsson FOSS-OUT ID: Trivial Change-Id: Ic914e764ee4816fbfcfbba5129426e2ba51a88ab Signed-off-by: Jayarami Reddy <jayarami.reddy@stericsson.com> Reviewed-on: http://gerrit.lud.stericsson.com/gerrit/33780 Reviewed-by: Jimmy RUBIN <jimmy.rubin@stericsson.com>
2011-10-27ux500: mcde: Remove unused MCDE auto syncMarcus Lorentzon
Auto sync for command mode displays are no longer used and should be implemented in fbdev if needed. ST-Ericsson ID: 365249 ST-Ericsson FOSS-OUT ID: Trivial ST-Ericsson Linux next: NA Change-Id: I860d9221dc79d6e5acd53c514d90a8eac57fb18a Reviewed-on: http://gerrit.lud.stericsson.com/gerrit/33800 Reviewed-by: Marcus LORENTZON <marcus.xm.lorentzon@stericsson.com> Tested-by: Marcus LORENTZON <marcus.xm.lorentzon@stericsson.com>
2011-10-27ux500: mcde: Remove unused codeMarcus Lorentzon
mcde_get_main_display is not used in the kernel. ST-Ericsson ID: 365249 ST-Ericsson FOSS-OUT ID: Trivial ST-Ericsson Linux next: NA Change-Id: I86b947e1273ba0a7340cee06cfa1d7d732d064b8 Reviewed-on: http://gerrit.lud.stericsson.com/gerrit/33784 Reviewed-by: Marcus LORENTZON <marcus.xm.lorentzon@stericsson.com> Tested-by: Marcus LORENTZON <marcus.xm.lorentzon@stericsson.com>
2011-10-27u8500_defconfig: Enable the Cypress touchscreenAvinash A
ST-Ericsson ID: 366971 ST-Ericsson Linux next: NA ST-Ericsson FOSS-OUT ID: Trivial Change-Id: I4724b322f5fba1b4fff49abb525380b98e8801a5 Signed-off-by: Avinash A <Avinash.a@stericsson.com> Reviewed-on: http://gerrit.lud.stericsson.com/gerrit/34062 Reviewed-by: Avinash A <avinash.a@stericsson.com> Tested-by: Avinash A <avinash.a@stericsson.com> Reviewed-by: QABUILD Reviewed-by: Rabin VINCENT <rabin.vincent@stericsson.com>
2011-10-27audio: hdmi: Config changes for enabling audioShyam Krishnan M
This enables audio in u5500_defconfig ST-Ericsson ID: 362962 ST-Ericsson Linux next: NA ST-Ericsson FOSS-OUT ID: Trivial Change-Id: I32d8a1b130fcbd962551f3f4d1aa22b7d414062e Signed-off-by: Shyam Krishnan M <shyam.moni@stericsson.com> Reviewed-on: http://gerrit.lud.stericsson.com/gerrit/33805 Reviewed-by: QABUILD Reviewed-by: Ganesh V <ganesh.v@stericsson.com> Tested-by: Ganesh V <ganesh.v@stericsson.com> Reviewed-by: Basavaprabhu BANDI <basavaprabhu.bandi@stericsson.com> Reviewed-by: Srinidhi KASAGAR <srinidhi.kasagar@stericsson.com>
2011-10-27mach-ux500 : Correct regulator name for cypress controllerAvinash A
This adds the correct supply name for the Cypress Touchscreen controller ST-Ericsson ID: 366971 ST-Ericsson Linux next: NA ST-Ericsson FOSS-OUT ID: Trivial Change-Id: I7b1cc31220059edf946ead080a9ad1321d6277f2 Signed-off-by: Avinash A <Avinash.a@stericsson.com> Reviewed-on: http://gerrit.lud.stericsson.com/gerrit/33832 Reviewed-by: Avinash A <avinash.a@stericsson.com> Tested-by: Avinash A <avinash.a@stericsson.com> Reviewed-by: QABUILD Reviewed-by: Srinidhi KASAGAR <srinidhi.kasagar@stericsson.com>
2011-10-27ARM: ux500: Add missing includeJonas Aaberg
pins.h didn't include <plat/pincfg.h> eventhough it used stuff from there. ST-Ericsson Linux next: - ST-Ericsson ID: - ST-Ericsson FOSS-OUT ID: Trivial Change-Id: I120b2814118aa43323c95f429793a135af6a68d6 Signed-off-by: Jonas Aaberg <jonas.aberg@stericsson.com> Reviewed-on: http://gerrit.lud.stericsson.com/gerrit/33424 Reviewed-by: QABUILD Reviewed-by: Rabin VINCENT <rabin.vincent@stericsson.com>
2011-10-27ARM: plat-nomadik: Add alias to clarify settingsJonas Aaberg
PIN_SLPM_WAKEUP_ENABLE/DISABLE do something completely different than the name says. ST-Ericsson Linux next: - ST-Ericsson ID: - ST-Ericsson FOSS-OUT ID: Trivial Change-Id: Ib334d2772fa21f58ee84f22dddf34830300a4f86 Signed-off-by: Jonas Aaberg <jonas.aberg@stericsson.com> Reviewed-on: http://gerrit.lud.stericsson.com/gerrit/33865 Reviewed-by: QABUILD Reviewed-by: Rabin VINCENT <rabin.vincent@stericsson.com>
2011-10-27mach-ux500:u5500: Temporarily disable DMA for sdHanumath Prasad
Due to problem with multiple insertion of SD card in DMA mode the dma support for SD cad is disabled temporarily. ST-Ericsson Id: ER 365282 ST-Ericsson Linux next: NA ST-Ericsson FOSS-OUT ID: Trivial Change-Id: Ic4bf04f5b3a7d4fe8c2e1d18be11308f5e7eb108 Signed-off-by: Hanumath Prasad <hanumath.prasad@stericsson.com> Reviewed-on: http://gerrit.lud.stericsson.com/gerrit/33785 Reviewed-by: QABUILD Reviewed-by: Preetham-rao K <preetham.rao@stericsson.com> Reviewed-by: Ulf HANSSON <ulf.hansson@stericsson.com> Reviewed-by: Srinidhi KASAGAR <srinidhi.kasagar@stericsson.com>
2011-10-27ux500: config: Enable Sony display for u8500Jimmy Rubin
ST-Ericsson ID: 321190 ST-Ericsson Linux next: NA ST-Ericsson FOSS-OUT ID: Trivial Signed-off-by: Jimmy Rubin <jimmy.rubin@stericsson.com> Change-Id: Idcf924f1e29b24f31349ee602cb86da1fa9e9065 Reviewed-on: http://gerrit.lud.stericsson.com/gerrit/33681 Reviewed-by: Jimmy RUBIN <jimmy.rubin@stericsson.com> Tested-by: Jimmy RUBIN <jimmy.rubin@stericsson.com> Reviewed-by: QABUILD Reviewed-by: Marcus LORENTZON <marcus.xm.lorentzon@stericsson.com>
2011-10-27ux500: mcde: Remove sony display data from boardJimmy Rubin
Removes sony display driver specific data from board-xxx-mcde.c ST-Ericsson ID: 321190 ST-Ericsson Linux Next: NA ST-Ericsson FOSS-OUT ID: Trivial Signed-off-by: Jimmy Rubin <jimmy.rubin@stericsson.com> Change-Id: Ice61906fb359edf5ebd665e066c4b537312cb94b Reviewed-on: http://gerrit.lud.stericsson.com/gerrit/32718 Reviewed-by: Jimmy RUBIN <jimmy.rubin@stericsson.com> Tested-by: Jimmy RUBIN <jimmy.rubin@stericsson.com> Reviewed-by: QABUILD Reviewed-by: Marcus LORENTZON <marcus.xm.lorentzon@stericsson.com>
2011-10-27ux500: mcde: Add correct reg id for sony displayJimmy Rubin
ST-Ericsson ID: 321190 ST-Ericsson Linux next: NA ST-Ericsson FOSS-OUT ID: Trivial Change-Id: I606e9f3df286e7f8cd383e6840561ab9742d612c Signed-off-by: Jimmy Rubin <jimmy.rubin@stericsson.com> Reviewed-on: http://gerrit.lud.stericsson.com/gerrit/33680 Reviewed-by: QABUILD Reviewed-by: Marcus LORENTZON <marcus.xm.lorentzon@stericsson.com>
2011-10-27ux500: pm: Resolve compile errorJohan Rudholm
performance.c fails to compile if CONFIG_MMC_BLOCK is not defined, so place the code that depends on the MMC subsystem within #ifdefs. ST-Ericsson ID: 357764 ST-Ericsson FOSS-OUT ID: Trivial ST-Ericsson Linux next: NA Change-Id: Ieb4d560ad1c5089cad2da5ce0f7869dafd1acfe1 Signed-off-by: Johan Rudholm <johan.rudholm@stericsson.com> Reviewed-on: http://gerrit.lud.stericsson.com/gerrit/33686 Reviewed-by: QABUILD Reviewed-by: Per FORLIN <per.forlin@stericsson.com> Reviewed-by: Jonas ABERG <jonas.aberg@stericsson.com>
2011-10-27u5500: set SLPM for ACCUART pinsRabin Vincent
So that modem logging over UART does not stop when IOFORCE is enabled. ST-Ericsson ID: 361345 ST-Ericsson Linux next: NA ST-Ericsson FOSS-OUT ID: Trivial Change-Id: I179ebb419b21f84cc047dc06246bc0bfe443fb48 Signed-off-by: Rabin Vincent <rabin.vincent@stericsson.com> Reviewed-on: http://gerrit.lud.stericsson.com/gerrit/33758 Reviewed-by: QABUILD Reviewed-by: Srinidhi KASAGAR <srinidhi.kasagar@stericsson.com>
2011-10-27u5500 : check for modem_itp in mloaderBibek Basu
collect the modem type info from bootargs and expose over sysfs ST-Ericsson ID: 337490 ST-Ericsson FOSS-OUT ID: Trivial ST-Ericsson Linux next: NA Change-Id: Ia705e168568a0be08409af792a04091d4e96a50a Signed-off-by: Bibek Basu <bibek.basu@stericsson.com> Reviewed-on: http://gerrit.lud.stericsson.com/gerrit/32480 Reviewed-by: Rabin VINCENT <rabin.vincent@stericsson.com>
2011-10-27u9500: fix HSI configuration to match with M7400Christophe Guibout
HSI paramters need to be updated to fit with M7400 HSI config. ST-Ericsson ID: 364664 ST-Ericsson FOSS-OUT ID: Trivial ST-Ericsson Linux next: NA Change-Id: I06f7d62fb82212b8b864a8b90bc00b328af215b7 Reviewed-on: http://gerrit.lud.stericsson.com/gerrit/32766 Reviewed-by: Christophe GUIBOUT <christophe.guibout@stericsson.com> Tested-by: Christophe GUIBOUT <christophe.guibout@stericsson.com> Reviewed-by: QABUILD Reviewed-by: Jonas ABERG <jonas.aberg@stericsson.com>
2011-10-27ux500: Changed fallback reboot reasonPer Fransson
reboot_reason_code() maps unrecognized strings to SW_RESET_NO_ARGUMENT instead of SW_RESET_CRASH. ST-Ericsson ID: 365831 Change-Id: I7b364db65a54b7bde3c5394ff7c2e921c4bb1692 Signed-off-by: Per Fransson <per.xx.fransson@stericsson.com> Reviewed-on: http://gerrit.lud.stericsson.com/gerrit/33723 Reviewed-by: QABUILD Reviewed-by: Jonas ABERG <jonas.aberg@stericsson.com>
2011-10-27ux500: pm: Nonexisting dep in KconfigJohan Rudholm
UX500_PRCMU_QOS_POWER has switched names to DBX500_PRCMU_QOS_POWER. ST-Ericsson ID: 357764 ST-Ericsson FOSS-OUT ID: Trivial ST-Ericsson Linux next: NA Change-Id: I2d9d71f2f76f264916ded2d5251747eff516cd63 Signed-off-by: Johan Rudholm <johan.rudholm@stericsson.com> Reviewed-on: http://gerrit.lud.stericsson.com/gerrit/33685 Reviewed-by: QABUILD Reviewed-by: Per FORLIN <per.forlin@stericsson.com> Reviewed-by: Jonas ABERG <jonas.aberg@stericsson.com>
2011-10-27ux500: pm: prevent sleep during high wlan loadPer Forlin
The system wake up latency from sleep adds an extra overhead when running wlan in DMA mode. This is not the case for PIO since the CPU usage prevents the system from going to sleep. ST-Ericsson ID: 357764 ST-Ericsson FOSS-OUT ID: Trivial ST-Ericsson Linux next: NA Change-Id: Ib3ac10da61ca9f3d9db4956a29fb694bd2c416cc Signed-off-by: Per Forlin <per.forlin@stericsson.com> Reviewed-on: http://gerrit.lud.stericsson.com/gerrit/33008 Reviewed-by: QABUILD Reviewed-by: Johan RUDHOLM <johan.rudholm@stericsson.com> Reviewed-by: Jonas ABERG <jonas.aberg@stericsson.com>
2011-10-27regulators: ab8500: Add support of low voltage batteryBengt Jonsson
Low voltage batteries have a wider voltage range with lower operating voltages. Some consumers in the platform may not work with the lower voltages and therefore need an extra regulator to boost the voltage in this case. This driver adds support for checking the consumers that need higher voltage (Vaux1, 2 and 3 regulators, 3 V SIM) and control the external buck/boost regulator accordingly. Note that to utilize the low voltage battery support, the battery voltage thresholds must be changed. This applies for the low battery voltage threshold of the battery manager and the OTP setting for the AB8500 BattOk levels. ST-Ericsson ID: 282517, 363432 ST-Ericsson Linux next: - ST-Ericsson FOSS-OUT ID: Trivial Change-Id: Ife07a622ec9748c027dbbd78b01e4ee7e92629ec Signed-off-by: Bengt Jonsson <bengt.g.jonsson@stericsson.com> Reviewed-on: http://gerrit.lud.stericsson.com/gerrit/33616 Reviewed-by: QABUILD
2011-10-27ab8500: Separate regulator and MFD platform dataBengt Jonsson
The ab8500 MFD should not have knowledge about regulator- specific platform data like number of regulators and regulator registers. As the regulator platform data is about to grow with external regulators, this information is moved to a new structure provided by the regulator driver. ST-Ericsson ID: 282517 ST-Ericsson Linux next: - ST-Ericsson FOSS-OUT ID: Trivial Change-Id: I77d03ffcc3273b0659dea3cffd8191b8c94b83d2 Signed-off-by: Bengt Jonsson <bengt.g.jonsson@stericsson.com> Reviewed-on: http://gerrit.lud.stericsson.com/gerrit/33615 Reviewed-by: QABUILD Reviewed-by: Yvan FILLION <yvan.fillion@stericsson.com>
2011-10-27ux500: mcde: Replace generic driver with SamsungMarcus Lorentzon
Remove use of MCDE generic DSI driver in favor of the real Samsung S6D16D0 driver to reduce the amount of code in mop500 board config. ST-Ericsson ID: 365249 ST-Ericsson Linux next: NA ST-Ericsson FOSS-OUT ID: Trivial Change-Id: Idecde46fba388789403fea63210e81ed10cb75db Reviewed-on: http://gerrit.lud.stericsson.com/gerrit/33264 Reviewed-by: Marcus LORENTZON <marcus.xm.lorentzon@stericsson.com> Tested-by: Marcus LORENTZON <marcus.xm.lorentzon@stericsson.com> Reviewed-by: Per PERSSON <per.xb.persson@stericsson.com> Reviewed-by: QABUILD Reviewed-by: Jimmy RUBIN <jimmy.rubin@stericsson.com>
2011-10-27ux500: mcde: Include S6D16D0 driver by defaultMarcus Lorentzon
ST-Ericsson ID: 365249 ST-Ericsson Linux next: NA ST-Ericsson FOSS-OUT ID: Trivial Change-Id: I38bfb6a8d33a76af94b61b0ee94dbcce8cff901e Reviewed-on: http://gerrit.lud.stericsson.com/gerrit/33449 Reviewed-by: Marcus LORENTZON <marcus.xm.lorentzon@stericsson.com> Tested-by: Marcus LORENTZON <marcus.xm.lorentzon@stericsson.com> Reviewed-by: Jimmy RUBIN <jimmy.rubin@stericsson.com> Reviewed-by: Per PERSSON <per.xb.persson@stericsson.com> Reviewed-by: QABUILD
2011-10-27ARM: ux500: mmio: Corrects disable mode pin configRajat Verma
Corrects disable mode pin configuration for xshutdown pins of camera in case of HREF v60 boards. XShutdown pins should be configured in mode (dir: out, value: low) when disabled. ST-Ericsson ID: 328427 ST-Ericsson FOSS-OUT ID: Trivial ST-Ericsson Linux next: NA Change-Id: I6db2fafef8061d43f191f4d7ffef6a15d2063c16 Signed-off-by: Rajat Verma <rajat.verma@stericsson.com> Reviewed-on: http://gerrit.lud.stericsson.com/gerrit/33571 Reviewed-by: QABUILD Reviewed-by: Rabin VINCENT <rabin.vincent@stericsson.com>
2011-10-27u8500: mmio: fix gpio_set_value warningRajat Verma
gpio_set_value_cansleep() should be used in place of gpio_set_value() for setting xenon_charge gpio pin which is located on expander chip in case of href boards < v60. ST-Ericsson Linux next: NA ST-Ericsson ID: 361940 ST-Ericsson FOSS-OUT ID: Trivial Change-Id: I62676b374552a2fa86f273c9d006220436c0fe68 Signed-off-by: Rajat Verma <rajat.verma@stericsson.com> Reviewed-on: http://gerrit.lud.stericsson.com/gerrit/33338 Reviewed-by: QABUILD Reviewed-by: Rabin VINCENT <rabin.vincent@stericsson.com>
2011-10-27ux500: add smp_twd clockRabin Vincent
Add a smp_twd clock with an appropriate get_rate() implementation so that localtimers scale correctly with cpufreq changes. ST-Ericsson ID: 361450 ST-Ericsson Linux next: NA ST-Ericsson FOSS-OUT ID: Trivial Change-Id: I492af8efe1c8c081f6079e538f6edf296eca3a02 Signed-off-by: Rabin Vincent <rabin.vincent@stericsson.com> Reviewed-on: http://gerrit.lud.stericsson.com/gerrit/33277 Reviewed-by: Linus WALLEIJ <linus.walleij@stericsson.com>
2011-10-27arm: u5500: Enable HDMI displayJoseph V P
For supporting HDMI by default, HDMI configurations are enabled. ST-Ericsson ID: 362962 ST-Ericsson Linux next: NA ST-Ericsson FOSS-OUT ID: Trivial Change-Id: I1ad6b80f56cbab53462e092eb45768b22ce55a04 Signed-off-by: Joseph V P <joseph.vp@stericsson.com> Reviewed-on: http://gerrit.lud.stericsson.com/gerrit/33337 Reviewed-by: Per PERSSON <per.xb.persson@stericsson.com> Reviewed-by: Jimmy RUBIN <jimmy.rubin@stericsson.com> Reviewed-by: Jayarami REDDY <jayarami.reddy@stericsson.com> Reviewed-by: Rabin VINCENT <rabin.vincent@stericsson.com>
2011-10-27ux500: camera_flash: add platform data for adp1653Rajat Verma
board specific information such as enable_gpio and interrupt line information should be obtained using platform_data and not hardcoded inside the driver itself. ST-Ericsson Linux next: NA ST-Ericsson ID: 361940 ST-Ericsson FOSS-OUT ID: Trivial Change-Id: I73a0f3e986bd3cbf19a0797190d514af9b84e3df Signed-off-by: Rajat Verma <rajat.verma@stericsson.com> Reviewed-on: http://gerrit.lud.stericsson.com/gerrit/33282 Reviewed-by: Jonas ABERG <jonas.aberg@stericsson.com> Reviewed-by: Rabin VINCENT <rabin.vincent@stericsson.com> Signed-off-by: Robert Marklund <robert.marklund@stericsson.com>
2011-10-27ARM: ux500: pins: Add debugfs info entryJonas Aaberg
ST-Ericsson ID: - ST-Ericsson Linux next: - ST-Ericsson FOSS-OUT ID: Trivial Change-Id: I573e79a6e9aacdc5673a25d55da38e20f7dacf4e Signed-off-by: Jonas Aaberg <jonas.aberg@stericsson.com> Reviewed-on: http://gerrit.lud.stericsson.com/gerrit/32693 Reviewed-by: Linus WALLEIJ <linus.walleij@stericsson.com>
2011-10-27u5500: mmio: fix build failureRabin Vincent
The header was moved but 5500 was not updated. Change-Id: Ica5e1d5386c1a41797eaac87b2e04222d06866e3 Signed-off-by: Rabin Vincent <rabin.vincent@stericsson.com> Reviewed-on: http://gerrit.lud.stericsson.com/gerrit/33275 Reviewed-by: Jonas ABERG <jonas.aberg@stericsson.com>
2011-10-27arm:config: Update u9500_defconfig with 8500 updatesYann Gautier
Here is the list of changes: * misc: audio_io: Remove obsolete and unused driver * u8500: Enable IP multicast * defconfig: enable SW reset feature * U8500: enable again the STM trace driver * ARM: u8500: configs: Enable regulator suspend force * u8500_defconfig: Enable ip rule support (339665) * ARM: config: u8500: Enable DB8500 regulators * ARM: ux500: Use u8500_wdt * u8500: watchdog: Reset to mainline status * cpuidle: only go to ApIdle * drivers:cpuidle U8500 support * ARM: ux500: suspend_dbg: Add debug information * ARM: ux500: suspend: Add wake on uart * ARM: ux500: Add suspend support * ARM: u8500: config: Enable cpufreq * ARM: ux500: pm: Added context and pm * ARM: ux500: Add prcmu-debug * ARM: ux500: Add prcmu qos power * ARM: ux500: Replace mach prcmu driver with mainlined version * ARM: ux500: Remove powersave * arm: u8500: Disable HDMI fb auto creation (364125) * ARM: u8500: Not every u8500 has a TPS6105 ST-Ericsson Linux next: - ST-Ericsson ID: 339665, 364125, 363600, 340331, 355020, 353690 ST-Ericsson FOSS-OUT ID: Trivial Change-Id: Ic6a568411a70ed40e7ca3a14a4dfef0e17fc8543 Original Change-Ids: I4641468e1d67e8596b1fcd9af69b0b81b686a0a0 Id652d38efceef6585fbb2505750edbacbc9e82a9 I61e0026c248f4a4f1078a988b0dcd395140e5510 I458d4565a5d1dedf84fbbc0c614daf80a9810693 I26ba2f655d4fb65708913cdeda632e2ca35fea0a I3a570cdf0dbdbea2b2279428fa10d8a1fc63f659 Ieb69b0092465a71e7233cc63bddb149998f96410 I48b2a181e091c3095299646be376b7953a7d849c I14fd6f9990e3fe58671ff256baa8e6dfa0376b1f I952f7521284a41af56698cd8fc72b833210ea30e I792d4c1b4d78f3cf67cc0c0150f0c93341d81979 I48792f56b4edc3fb93897d89ad18402a27652a4b Ia9ae6894333ee8d696a2b946b565496e1c26554f I039557aed52693dfad9b76ea0f2f746193aa4316 I6d29a32251144e3ff33841516ea265ea9964f46e I1cfccc33d6e412dfcaaf1793ce19ea27c4b3b724 I810ae725fe1914ff605cf9704f8bdfb1a07b8f9b Ic803dcddb6656c4c4be82b49b11530624942012d I0c8d97679ee186ca8205aeeafa0030568f540d2e I8ceaa65e5e0905fcd85bf8e793b4a5ab2d2df64c I4098a7640a91c7f2695748a7a7ddf96f16e7981b Iae2433a2060f2415dfcd30dd7a16338728b91ec2 Change-Id: Ic6a568411a70ed40e7ca3a14a4dfef0e17fc8543 Reviewed-on: http://gerrit.lud.stericsson.com/gerrit/32735 Reviewed-by: Derek MORTON <derek.morton@stericsson.com> Reviewed-by: Yann GAUTIER <yann.gautier@stericsson.com> Tested-by: Yann GAUTIER <yann.gautier@stericsson.com> Reviewed-by: Christophe GUIBOUT <christophe.guibout@stericsson.com> Reviewed-by: Andrew LYNN <andrew.lynn@stericsson.com>
2011-10-27ARM: U9500: HSI registers update to DB8500 V2 specPawel Szyszuk
ST-Ericsson Linux next: NA ST-Ericsson ID: 365681 ST-Ericsson FOSS-OUT ID: NA Change-Id: I396c2a4d44ded438308e358aa0ad976a397d4dd6 Signed-off-by: Pawel Szyszuk <pawel.szyszuk@stericsson.com> Reviewed-on: http://gerrit.lud.stericsson.com/gerrit/33224 Reviewed-by: Christopher BLAIR <chris.blair@stericsson.com> Reviewed-by: Derek MORTON <derek.morton@stericsson.com> Reviewed-by: Andrew LYNN <andrew.lynn@stericsson.com>
2011-10-27ux500: mcde: Add UIB8500R3 display supportJimmy Rubin
On the UIB8500R3 a Sony ACX424akp panel is used. The UIB will be detected dynamically and use the correct display driver. ST-Ericsson ID: 321190 ST-Ericsson Linux next: NA ST-Ericsson FOSS-OUT ID: Trivial Change-Id: I9157e1d76334b665b37e871b1efe10c3415cc492 Signed-off-by: Jimmy Rubin <jimmy.rubin@stericsson.com> Reviewed-on: http://gerrit.lud.stericsson.com/gerrit/31952 Reviewed-by: Marcus LORENTZON <marcus.xm.lorentzon@stericsson.com> Reviewed-by: Jonas ABERG <jonas.aberg@stericsson.com>
2011-10-27ux500: uib: Add functions to get type of uibJimmy Rubin
ST-Ericsson ID: 321190 ST-Ericsson Linux Next: NA ST-Ericsson FOSS-OUT ID: Trivial Change-Id: Ibfe3da0b59978533d3acb8de6bc015c48b605dce Signed-off-by: Jimmy Rubin <jimmy.rubin@stericsson.com> Reviewed-on: http://gerrit.lud.stericsson.com/gerrit/32593 Reviewed-by: Marcus LORENTZON <marcus.xm.lorentzon@stericsson.com> Signed-off-by: Robert Marklund <robert.marklund@stericsson.com>
2011-10-27arm: mach-ux500: Lower the upper battery temperature limitsKalle Komierowski
This is to make it easier to test the temperature limits during battery charging. Customers will change the values to their own preferences. ST-Ericsson ID: 341012 ST-Ericsson Linux next: Not tested ST-Ericsson FOSS-OUT ID: Trivial Change-Id: I4b6078a82816876d49eccc8c892e7ea2487939a1 Signed-off-by: Kalle Komierowski <karl.komierowski@stericsson.com> Reviewed-on: http://gerrit.lud.stericsson.com/gerrit/32955 Reviewed-by: Jonas ABERG <jonas.aberg@stericsson.com>
2011-10-27ARM: u8500: STM: board depended code splitJurijs Soloveckis
Hardware depended code for STM device is moved to the separate file. ST-Ericsson ID: 349677 ST-Ericsson Linux next: N/A ST-Ericsson FOSS-OUT ID: Trivial Change-Id: I5d3d0e069b0e8929b99fcfe9cb5e37a950caf716 Signed-off-by: Jurijs Soloveckis <jurijs.soloveckis@stericsson.com> Reviewed-on: http://gerrit.lud.stericsson.com/gerrit/32847 Reviewed-by: Pierre PEIFFER <pierre.peiffer@stericsson.com> Reviewed-by: Sebastian RASMUSSEN <sebastian.rasmussen@stericsson.com> Signed-off-by: Robert Marklund <robert.marklund@stericsson.com>
2011-10-27misc: audio_io: Remove obsolete and unused driverJonas Aaberg
audio_io is superseded by alsa. ST-Ericsson Linux next: - ST-Ericsson ID: - ST-Ericsson FOSS-OUT ID: Trivial Change-Id: I4641468e1d67e8596b1fcd9af69b0b81b686a0a0 Signed-off-by: Jonas Aaberg <jonas.aberg@stericsson.com> Reviewed-on: http://gerrit.lud.stericsson.com/gerrit/32904 Reviewed-by: Ola LILJA2 <ola.o.lilja@stericsson.com>
2011-10-27u8500: Enable IP multicastBartosz Markowski
Enables CONFIG_IP_MULTICAST in u8500_defconfig ST-Ericsson Linux next: Not tested ST-Ericsson ID: 355020, 353690 ST-Ericsson FOSS-OUT ID: Trivial Change-Id: Id652d38efceef6585fbb2505750edbacbc9e82a9 Signed-off-by: Bartosz Markowski <bartosz.markowski@tieto.com> Reviewed-on: http://gerrit.lud.stericsson.com/gerrit/32958 Reviewed-by: Srinidhi KASAGAR <srinidhi.kasagar@stericsson.com>
2011-10-27mach-ux500: keypad support for sony displayAvinash A
This add the platform related changes to support the keypad for sony displays ST-Ericsson ID: 362724 ST-Ericsson Linux next: NA ST-Ericsson FOSS-OUT ID: Trivial Change-Id: Ibb0ead5a76dff423e00b1c3d169a9d20d140d1c3 Signed-off-by: Avinash A <Avinash.a@stericsson.com> Reviewed-on: http://gerrit.lud.stericsson.com/gerrit/32506 Reviewed-by: Avinash A <avinash.a@stericsson.com> Tested-by: Avinash A <avinash.a@stericsson.com> Reviewed-by: Srinidhi KASAGAR <srinidhi.kasagar@stericsson.com>
2011-10-27mach-ux500: add the proper device name of bu touchscreenAvinash A
This adds the proper device name and the missing platform data for bu touchscreen ST-Ericsson ID: 365317 ST-Ericsson Linux next: NA ST-Ericsson FOSS-OUT ID: Trivial Change-Id: I8cdf7f2748a623251e2d781cea4b1f2ea9e9a35b Signed-off-by: Avinash A <Avinash.a@stericsson.com> Reviewed-on: http://gerrit.lud.stericsson.com/gerrit/32885 Reviewed-by: Avinash A <avinash.a@stericsson.com> Tested-by: Avinash A <avinash.a@stericsson.com> Reviewed-by: Srinidhi KASAGAR <srinidhi.kasagar@stericsson.com>
2011-10-27u5500:Enable low EMI for SDI3(GPIO171-175)Sesahgiri.Holi
ST-Ericsson ID: 345488 ST-Ericsson Linux next: NA ST-Ericsson FOSS-OUT ID: Trivial Change-Id: Id7e403916437505fed4c0cd9512923a9aa1d81ec Signed-off-by: Sesahgiri.Holi <seshagiri.holi@stericsson.com> Reviewed-on: http://gerrit.lud.stericsson.com/gerrit/32683 Reviewed-by: Preetham-rao K <preetham.rao@stericsson.com> Reviewed-by: Ulf HANSSON <ulf.hansson@stericsson.com> Reviewed-by: Rabin VINCENT <rabin.vincent@stericsson.com>
2011-10-27arm: ux500: fix compilation errorsJayarami Reddy
fix compilation errors when HDMI_FB_AUTO_CREATE is not set for db5500 ST-Ericsson ID: 365167 ST-Ericsson Linux next: Not tested, ER 282779 ST-Ericsson FOSS-OUT ID: Trivial Change-Id: I3d1b79b350c2672671a4d71b11a3103ec603d6de Signed-off-by: Jayarami Reddy <jayarami.reddy@stericsson.com> Reviewed-on: http://gerrit.lud.stericsson.com/gerrit/32193 Reviewed-by: Per PERSSON <per.xb.persson@stericsson.com> Reviewed-by: Jimmy RUBIN <jimmy.rubin@stericsson.com> Reviewed-by: Rabin VINCENT <rabin.vincent@stericsson.com>
2011-10-27Enable pull down for GPIO/MSP2Alexandre Bouin
Set pull down for GPIO 193, 194 and 195 ST-Ericsson ID: 332619 ST-Ericsson FOSS OUT ID: NA Change-Id: Ifb2eb62250616ae572158f23fb3be90f15b47e24 Signed-off-by: Cedric Madianga <cedric.madianga-nonst@stericsson.com> Reviewed-on: http://gerrit.lud.stericsson.com/gerrit/32154 Reviewed-by: Alexandre BOUIN <alexandre.bouin-nonst@stericsson.com> Tested-by: Alexandre BOUIN <alexandre.bouin-nonst@stericsson.com>
2011-10-27defconfig: enable cg2900Shyam Krishnan M
This patch sets configuration of cg2900. ST-Ericsson Linux next: NA ST-Ericsson ID: 335714 ST-Ericsson FOSS-OUT ID: Trivial Change-Id: Ie114065582f53b3af429660768d17456edfa70d6 Signed-off-by: Shyam Krishnan M <shyam.moni@stericsson.com> Reviewed-on: http://gerrit.lud.stericsson.com/gerrit/32800 Reviewed-by: Srinidhi KASAGAR <srinidhi.kasagar@stericsson.com>
2011-10-27ARM: U9500: HSI core clocks initializationPawel Szyszuk
ST-Ericsson Linux next: NA ST-Ericsson ID: 343481 ST-Ericsson FOSS-OUT ID: Trivial Change-Id: Ic59f08e1bb5d858344d95b5d34ae8a5d85d9aa1d Signed-off-by: Pawel Szyszuk <pawel.szyszuk@stericsson.com> Reviewed-on: http://gerrit.lud.stericsson.com/gerrit/32518 Reviewed-by: Andrew LYNN <andrew.lynn@stericsson.com>
2011-10-27defconfig: enable SW reset featurePer Fransson
When there is no crash kernel image loaded, perform a SW reset at a panic. ST-Ericsson ID: 340331 Change-Id: I61e0026c248f4a4f1078a988b0dcd395140e5510 Signed-off-by: Per Fransson <per.xx.fransson@stericsson.com> Reviewed-on: http://gerrit.lud.stericsson.com/gerrit/32679 Reviewed-by: Srinidhi KASAGAR <srinidhi.kasagar@stericsson.com>
generated by cgit v1.2.3 (git 2.39.1) at 2024-06-28 14:26:13 +0000