summaryrefslogtreecommitdiff
path: root/arch
AgeCommit message (Collapse)Author
2012-02-10Merge branch 'perf-urgent-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip * 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: perf: Fix double start/stop in x86_pmu_start() perf evsel: Fix an issue where perf report fails to show the proper percentage perf tools: Fix prefix matching for kernel maps perf tools: Fix perf stack to non executable on x86_64 perf: Remove deprecated WARN_ON_ONCE()
2012-02-09Merge tag 'tty-3.3-rc3' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty Serial/TTY fixes for the 3.3-rc3 tree Just a few new device ids, omap serial driver regression fixes, and a build fix for the 8250 driver movement. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> * tag 'tty-3.3-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: tty: serial: omap-serial: wakeup latency constraint is in microseconds, not milliseconds tty: serial: OMAP: block idle while the UART is transferring data in PIO mode tty: serial: OMAP: use a 1-byte RX FIFO threshold in PIO mode m32r: relocate drivers back out of 8250 dir tty: fix a build failure on sparc serial: samsung: Add support for EXYNOS5250 serial: samsung: Add support for EXYNOS4212 and EXYNOS4412 drivers/tty/vt/vt_ioctl.c: fix KDFONTOP 32bit compatibility layer
2012-02-09tty: serial: OMAP: block idle while the UART is transferring data in PIO modePaul Walmsley
Prevent OMAP UARTs from going idle while they are still transferring data in PIO mode. This works around an oversight in the OMAP UART hardware present in OMAP34xx and earlier: an idle UART won't send a wakeup when the TX FIFO threshold is reached. This causes long delays during data transmission when the MPU powerdomain enters a low-power mode. The MPU interrupt controller is not able to respond to interrupts when it's in a low-power state, so the TX buffer is not refilled until another wakeup event occurs. This fix changes the erratum i291 DMA idle workaround. Rather than toggling between force-idle and no-idle, it will toggle between smart-idle and no-idle. The important part of the workaround is the no-idle part, so this shouldn't result in any change in behavior. This fix should work on all OMAP UARTs. Future patches intended for the 3.4 merge window will make this workaround conditional on a "feature" flag, and will use the OMAP36xx+ TX event wakeup support. Thanks to Kevin Hilman <khilman@ti.com> for mentioning the erratum i291 workaround, which led to the development of this approach. Signed-off-by: Paul Walmsley <paul@pwsan.com> Cc: Alan Cox <alan@linux.intel.com> Cc: Tomi Valkeinen <tomi.valkeinen@ti.com> Acked-by: Govindraj.R <govindraj.raja@ti.com> Reviewed-by: Kevin Hilman <khilman@ti.com> Tested-by: Kevin Hilman <khilman@ti.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-02-07Merge tag 'fbdev-fixes-for-3.3-1' of git://github.com/schandinat/linux-2.6Linus Torvalds
fbdev fixes for 3.3 It includes: - compile fix for fsl-diu-fb - fix for a suspend/resume issue in atmel_lcdfb - fix for a suspend/resume issue in OMAP - workaround for a hardware bug to avoid physical damage in OMAP - really trivial dead code removal in intelfb * tag 'fbdev-fixes-for-3.3-1' of git://github.com/schandinat/linux-2.6: atmel_lcdfb: fix usage of CONTRAST_CTR in suspend/resume intelfb: remove some dead code drivers/video: compile fixes for fsl-diu-fb.c OMAPDSS: HDMI: PHY burnout fix OMAP: 4430SDP/Panda: add HDMI HPD gpio OMAP: 4430SDP/Panda: setup HDMI GPIO muxes OMAPDSS: remove wrong HDMI HPD muxing OMAP: 4430SDP/Panda: rename HPD GPIO to CT_CP_HPD OMAP: 4430SDP/Panda: use gpio_free_array to free HDMI gpios OMAPDSS: use sync versions of pm_runtime_put
2012-02-07Merge tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhostLinus Torvalds
arch: fix ioport mapping on mips,sh Kevin Cernekee reported that recent cleanup that replaced pci_iomap with a generic function failed to take into account the differences in io port handling on mips and sh architectures. Rather than revert the changes reintroducing the code duplication, this patchset fixes this by adding ability for architectures to override ioport mapping for pci devices. Signed-off-by: Michael S. Tsirkin <mst@redhat.com> * tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost: sh: use the the PCI channels's io_map_base mips: use the the PCI controller's io_map_base lib: add NO_GENERIC_PCI_IOPORT_MAP
2012-02-07perf: Fix double start/stop in x86_pmu_start()Stephane Eranian
The following patch fixes a bug introduced by the following commit: e050e3f0a71b ("perf: Fix broken interrupt rate throttling") The patch caused the following warning to pop up depending on the sampling frequency adjustments: ------------[ cut here ]------------ WARNING: at arch/x86/kernel/cpu/perf_event.c:995 x86_pmu_start+0x79/0xd4() It was caused by the following call sequence: perf_adjust_freq_unthr_context.part() { stop() if (delta > 0) { perf_adjust_period() { if (period > 8*...) { stop() ... start() } } } start() } Which caused a double start and a double stop, thus triggering the assert in x86_pmu_start(). The patch fixes the problem by avoiding the double calls. We pass a new argument to perf_adjust_period() to indicate whether or not the event is already stopped. We can't just remove the start/stop from that function because it's called from __perf_event_overflow where the event needs to be reloaded via a stop/start back-toback call. The patch reintroduces the assertion in x86_pmu_start() which was removed by commit: 84f2b9b ("perf: Remove deprecated WARN_ON_ONCE()") In this second version, we've added calls to disable/enable PMU during unthrottling or frequency adjustment based on bug report of spurious NMI interrupts from Eric Dumazet. Reported-and-tested-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: Stephane Eranian <eranian@google.com> Acked-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: markus@trippelsdorf.de Cc: paulus@samba.org Link: http://lkml.kernel.org/r/20120207133956.GA4932@quad [ Minor edits to the changelog and to the code ] Signed-off-by: Ingo Molnar <mingo@elte.hu>
2012-02-06Merge branch 'kvm-updates/3.3' of git://git.kernel.org/pub/scm/virt/kvm/kvmLinus Torvalds
Fixing a regression with the PMU MSRs when PMU virtualization is disabled, a guest-internal DoS with the SYSCALL instruction, and a dirty memory logging race that may cause live migration to fail. * 'kvm-updates/3.3' of git://git.kernel.org/pub/scm/virt/kvm/kvm: KVM: do not #GP on perf MSR writes when vPMU is disabled KVM: x86: fix missing checks in syscall emulation KVM: x86: extend "struct x86_emulate_ops" with "get_cpuid" KVM: Fix __set_bit() race in mark_page_dirty() during dirty logging
2012-02-04Merge tag 'fixes-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc arm-soc fixes for 3.3-rc * A series of OMAP regression fixes for merge window fallout * Two patches for Davinci, one removes some misdefined clocks, the other is a regression fix for merge window fallout * Two patches that makes Broadcom bcmring build again (and removes a bunch of unused code in the process) * tag 'fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: ARM: bcmring: fix build failure in mach-bcmring/arch.c ARM: bcmring: remove unused DMA map code ARM: davinci: update mdio bus name ARM: OMAP2+: arch/arm/mach-omap2/smartreflex.c: add missing iounmap ARM: OMAP2+: arch/arm/mach-omap2/devices.c: introduce missing kfree ARM: OMAP: fix MMC2 loopback clock handling ARM: OMAP: fix erroneous mmc2 clock change on mmc3 setup ARM: OMAP2+: GPMC: fix device size setup ARM: OMAP2+: timer: Fix crash due to wrong arg to __omap_dm_timer_read_counter ARM: OMAP3: hwmod data: register dss hwmods after dss_core ARM: OMAP2/3: PRM: fix missing plat/irqs.h build breakage ARM: OMAP2+: io: fix compilation breakage on 2420-only configs ARM: OMAP4: hwmod data: Add names for DMIC memory address space ARM: OMAP3: hwmod data: add SYSC_HAS_ENAWAKEUP for dispc ARM: OMAP2+: hwmod data: split omap2/3 dispc hwmod class ARM: davinci: DA850: remove non-existing pll1_sysclk4-7 clocks ARM: OMAP2: fix regulator warnings ARM: OMAP2: fix omap3 touchbook kconfig warning i2c: OMAP: Fix OMAP1 build error
2012-02-04ARM: bcmring: fix build failure in mach-bcmring/arch.cPaul Gortmaker
Upstream commit d1fce9c115eeb93e01c01732dfe9a86cf76009cf "ARM: restart: bcmring: use new restart hook" breaks building of this platform, since what used to be the last field of the MACHINE_START/END block didn't have a trailing comma. Once another field was added below, we get: arch/arm/mach-bcmring/arch.c:198: error: request for member 'restart' in something not a structure or union Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com> Acked-by: Jiandong Zheng <jdzheng@broadcom.com> Signed-off-by: Olof Johansson <olof@lixom.net>
2012-02-04ARM: bcmring: remove unused DMA map codeJD Zheng
Remove BCMRING DMA map code which is no longer used. This also fixes a build error with dma.c introduced by bfcd2ea6a40b33270564d706396f1b514a988d3c. Signed-off-by: Jiandong Zheng <jdzheng@broadcom.com> Signed-off-by: Olof Johansson <olof@lixom.net>
2012-02-04Merge branch 'fixes' of git://git.infradead.org/users/vkoul/slave-dmaLinus Torvalds
* 'fixes' of git://git.infradead.org/users/vkoul/slave-dma: i.MX SDMA: Fix burstsize settings ARM: mach-shmobile: both USB DMAC instances on sh7372 are slave-only dma: sh_dma: not all SH DMAC implementations support MEMCPY at_hdmac: bugfix for enabling channel irq dmaengine: fix missing 'cnt' in ?: in dmatest
2012-02-04Merge branch 'akpm'Linus Torvalds
* akpm: mm: compaction: check pfn_valid when entering a new MAX_ORDER_NR_PAGES block during isolation for migration readahead: fix pipeline break caused by block plug kprobes: fix a memory leak in function pre_handler_kretprobe() drivers/tty/vt/vt_ioctl.c: fix KDFONTOP 32bit compatibility layer lkdtm: avoid calling lkdtm_do_action() with spinlock held mm/filemap_xip.c: fix race condition in xip_file_fault() mm/memcontrol.c: fix warning with CONFIG_NUMA=n avr32: select generic atomic64_t support mm: postpone migrated page mapping reset xtensa: fix memscan() MAINTAINERS: update lguest F: patterns MAINTAINERS: remove staging sections MAINTAINERS: remove iMX5 section MAINTAINERS: update partitions block F: patterns
2012-02-03Merge branch 'fixes' of git://git.linaro.org/people/rmk/linux-armLinus Torvalds
* 'fixes' of git://git.linaro.org/people/rmk/linux-arm: ARM: 7314/1: kuser: consistently use usr_ret for returning from helpers ARM: 7302/1: Add TLB flushing for both entries in a PMD ARM: 7303/1: perf: add empty NODE event definitions for Cortex-A5 and Cortex-A15 ARM: 7308/1: vfp: flush thread hwstate before copying ptrace registers ARM: 7307/1: vfp: fix ptrace regset modification race ARM: 7306/1: vfp: flush thread hwstate before restoring context from sigframe Revert "ARM: 7304/1: ioremap: fix boundary check when reusing static mapping"
2012-02-03avr32: select generic atomic64_t supportFabio Baltieri
Enable use of the generic atomic64 implementation on AVR32 platforms. Without this the kernel fails to build as the architecture does not provide its version. Signed-off-by: Fabio Baltieri <fabio.baltieri@gmail.com> Acked-by: Hans-Christian Egtvedt <egtvedt@samfundet.no> Cc: Haavard Skinnemoen <hskinnemoen@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-02-03xtensa: fix memscan()Akinobu Mita
Defining memscan() as memchr() is wrong, because the return values of memscan() and memchr() are different when the character is not found. So use the generic memscan() implementation to fix this. Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com> Cc: Chris Zankel <chris@zankel.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-02-03ARM: 7314/1: kuser: consistently use usr_ret for returning from helpersWill Deacon
__kuser_cmpxchg64 has a return path using bx lr to get back to the caller. This is actually ok since the code in question is predicated on CONFIG_CPU_32v6K, but for the sake of consistency using the usr_ret macro is probably better. Acked-by: Dave Martin <dave.martin@linaro.org> Acked-by: Nicolas Pitre <nico@linaro.org> Signed-off-by: Will Deacon <will.deacon@arm.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2012-02-03perf: Remove deprecated WARN_ON_ONCE()Stephane Eranian
With the new throttling/unthrottling code introduced with commit: e050e3f0a71b ("perf: Fix broken interrupt rate throttling") we occasionally hit two WARN_ON_ONCE() checks in: - intel_pmu_pebs_enable() - intel_pmu_lbr_enable() - x86_pmu_start() The assertions are no longer problematic. There is a valid path where they can trigger but it is harmless. The assertion can be triggered with: $ perf record -e instructions:pp .... Leading to paths: intel_pmu_pebs_enable intel_pmu_enable_event x86_perf_event_set_period x86_pmu_start perf_adjust_freq_unthr_context perf_event_task_tick scheduler_tick And: intel_pmu_lbr_enable intel_pmu_enable_event x86_perf_event_set_period x86_pmu_start perf_adjust_freq_unthr_context. perf_event_task_tick scheduler_tick cpuc->enabled is always on because when we get to perf_adjust_freq_unthr_context() the PMU is not totally disabled. Furthermore when we need to adjust a period, we only stop the event we need to change and not the entire PMU. Thus, when we re-enable, cpuc->enabled is already set. Note that when we stop the event, both pebs and lbr are stopped if necessary (and possible). Signed-off-by: Stephane Eranian <eranian@google.com> Cc: peterz@infradead.org Link: http://lkml.kernel.org/r/20120202110401.GA30911@quad Signed-off-by: Ingo Molnar <mingo@elte.hu>
2012-02-02Merge branch 'next' of git://git.monstr.eu/linux-2.6-microblazeLinus Torvalds
* 'next' of git://git.monstr.eu/linux-2.6-microblaze: Revert "microblaze: Add topology init"
2012-02-02Merge branches 'core-urgent-for-linus', 'perf-urgent-for-linus', ↵Linus Torvalds
'sched-urgent-for-linus' and 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip * 'core-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: bugs, x86: Fix printk levels for panic, softlockups and stack dumps * 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: perf top: Fix number of samples displayed perf tools: Fix strlen() bug in perf_event__synthesize_event_type() perf tools: Fix broken build by defining _GNU_SOURCE in Makefile x86/dumpstack: Remove unneeded check in dump_trace() perf: Fix broken interrupt rate throttling * 'sched-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: sched/rt: Fix task stack corruption under __ARCH_WANT_INTERRUPTS_ON_CTXSW sched: Fix ancient race in do_exit() sched/nohz: Fix nohz cpu idle load balancing state with cpu hotplug sched/s390: Fix compile error in sched/core.c sched: Fix rq->nr_uninterruptible update race * 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/reboot: Remove VersaLogic Menlow reboot quirk x86/reboot: Skip DMI checks if reboot set by user x86: Properly parenthesize cmpxchg() macro arguments
2012-02-02ARM: 7302/1: Add TLB flushing for both entries in a PMDCatalin Marinas
Linux uses two PMD entries for a PTE with the classic page table format, covering 2MB range. However, the __pte_free_tlb() function only adds a single TLB flush corresponding to 1MB range covering 'addr'. On Cortex-A15, level 1 entries can be cached by the TLB independently of the level 2 entries and without additional flushing a PMD entry would be left pointing at the wrong PTE. The patch limits the TLB flushing range to two 4KB pages around the 1MB boundary within PMD. Signed-off-by: Catalin Marinas <catalin.marinas@arm.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2012-02-02ARM: 7303/1: perf: add empty NODE event definitions for Cortex-A5 and Cortex-A15Will Deacon
Commit 89d6c0b5 ("perf, arch: Add generic NODE cache events") added empty NODE event definitions for the ARM PMU implementations. This was merged along with Cortex-A5 and Cortex-A15 PMU support, so they missed out on the original patch. This patch adds the empty definitions to Cortex-A5 and Cortex-A15. Signed-off-by: Will Deacon <will.deacon@arm.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2012-02-02ARM: 7308/1: vfp: flush thread hwstate before copying ptrace registersWill Deacon
If we are context switched whilst copying into a thread's vfp_hard_struct then the partial copy may be corrupted by the VFP context switching code (see "ARM: vfp: flush thread hwstate before restoring context from sigframe"). This patch updates the ptrace VFP set code so that the thread state is flushed before the copy, therefore disabling VFP and preventing corruption from occurring. Cc: stable <stable@vger.kernel.org> Signed-off-by: Will Deacon <will.deacon@arm.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2012-02-02ARM: 7307/1: vfp: fix ptrace regset modification raceDave Martin
In a preemptible kernel, vfp_set() can be preempted, causing the hardware VFP context to be switched while the thread vfp state is being read and modified. This leads to a race condition which can cause the thread vfp state to become corrupted if lazy VFP context save occurs due to preemption in between the time thread->vfpstate is read and the time the modified state is written back. This may occur if preemption occurs during the execution of a ptrace() call which modifies the VFP register state of a thread. Such instances should be very rare in most realistic scenarios -- none has been reported, so far as I am aware. Only uniprocessor systems should be affected, since VFP context save is not currently lazy in SMP kernels. The problem was introduced by my earlier patch migrating to use regsets to implement ptrace. This patch does a vfp_sync_hwstate() before reading thread->vfpstate, to make sure that the thread's VFP state is not live in the hardware registers while the registers are modified. Thanks to Will Deacon for spotting this. Cc: stable <stable@vger.kernel.org> Signed-off-by: Dave Martin <dave.martin@linaro.org> Signed-off-by: Will Deacon <will.deacon@arm.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2012-02-02ARM: 7306/1: vfp: flush thread hwstate before restoring context from sigframeWill Deacon
Following execution of a signal handler, we currently restore the VFP context from the ucontext in the signal frame. This involves copying from the user stack into the current thread's vfp_hard_struct and then flushing the new data out to the hardware registers. This is problematic when using a preemptible kernel because we could be context switched whilst updating the vfp_hard_struct. If the current thread has made use of VFP since the last context switch, the VFP notifier will copy from the hardware registers into the vfp_hard_struct, overwriting any data that had been partially copied by the signal code. Disabling preemption across copy_from_user calls is a terrible idea, so instead we move the VFP thread flush *before* we update the vfp_hard_struct. Since the flushing is performed lazily, this has the effect of disabling VFP and clearing the CPU's VFP state pointer, therefore preventing the thread from being updated with stale data on the next context switch. Cc: stable <stable@vger.kernel.org> Tested-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Will Deacon <will.deacon@arm.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2012-02-02Revert "ARM: 7304/1: ioremap: fix boundary check when reusing static mapping"Russell King
This reverts commit 3c424f359898aff48c3d5bed608ac706f8a528c3. Joachim Eastwood reports: | "ARM: 7304/1: ioremap: fix boundary check when reusing static mapping" | Commit: 3c424f359898aff48c3d5bed608ac706f8a528c3 in Linus master | | Breaks booting on my custom AT91RM9200 board. | There isn't any error messages or anything that indicates what goes | wrong it just stops after; Uncompressing Linux... done, booting the | kernel. | | Reverting it makes my board boot again. and further debugging reveals: ioremap: pfn=fffff phys=fffff000 offset=400 size=1000 ioremap: area c3ffdfc0: phys_addr=200000 pfn=200 size=4000 ioremap: found: addr fef74000 => fed73000 => fed73400 Clearly, an area for pfn 0x200, 16K can't ever satisfy a request for pfn 0xfffff. This happens because the changed if statement becomes: if (0x00200 > 0xfffff || 0xfffff000 + 0x400 + 0x1000-1 > 0x00200000 + 0x4000-1) and therefore: if (0x00200 > 0xfffff || 0x000003ff > 0x00203fff) The if condition fails, and so we _believe_ that the SRAM mapping fits our request. Clearly that's totally bogus. Moreover, the original premise of the 'fix' patch was wrong: | The condition checking boundaries of the requested and existing | mappings didn't take in-page offset into consideration though, | which lead to obscure and hard to debug problems when requested | mapping crossed end of the static one. as the code immediately above this loop does: size = PAGE_ALIGN(offset + size); so 'size' already contains the requested offset into the page. So, revert the broken 'fix'. Acked-by: Nicolas Pitre <nico@linaro.org>
2012-02-02lib: Fix multiple definitions of clz_tabDavid Miller
Both sparc 32-bit's software divide assembler and MPILIB provide clz_tab[] with identical contents. Break it out into a seperate object file and select it when SPARC32 or MPILIB is set. Reported-by: Al Viro <viro@ZenIV.linux.org.uk> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: James Morris <jmorris@namei.org>
2012-02-01ARM: mach-shmobile: both USB DMAC instances on sh7372 are slave-onlyGuennadi Liakhovetski
Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Acked-by: Paul Mundt <lethal@linux-sh.org> Signed-off-by: Vinod Koul <vinod.koul@linux.intel.com>
2012-02-01KVM: do not #GP on perf MSR writes when vPMU is disabledGleb Natapov
Return to behaviour perf MSR had before introducing vPMU in case vPMU is disabled. Some guests access those registers unconditionally and do not expect it to fail. Signed-off-by: Gleb Natapov <gleb@redhat.com> Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
2012-02-01KVM: x86: fix missing checks in syscall emulationStephan Bärwolf
On hosts without this patch, 32bit guests will crash (and 64bit guests may behave in a wrong way) for example by simply executing following nasm-demo-application: [bits 32] global _start SECTION .text _start: syscall (I tested it with winxp and linux - both always crashed) Disassembly of section .text: 00000000 <_start>: 0: 0f 05 syscall The reason seems a missing "invalid opcode"-trap (int6) for the syscall opcode "0f05", which is not available on Intel CPUs within non-longmodes, as also on some AMD CPUs within legacy-mode. (depending on CPU vendor, MSR_EFER and cpuid) Because previous mentioned OSs may not engage corresponding syscall target-registers (STAR, LSTAR, CSTAR), they remain NULL and (non trapping) syscalls are leading to multiple faults and finally crashs. Depending on the architecture (AMD or Intel) pretended by guests, various checks according to vendor's documentation are implemented to overcome the current issue and behave like the CPUs physical counterparts. [mtosatti: cleanup/beautify code] Signed-off-by: Stephan Baerwolf <stephan.baerwolf@tu-ilmenau.de> Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
2012-02-01KVM: x86: extend "struct x86_emulate_ops" with "get_cpuid"Stephan Bärwolf
In order to be able to proceed checks on CPU-specific properties within the emulator, function "get_cpuid" is introduced. With "get_cpuid" it is possible to virtually call the guests "cpuid"-opcode without changing the VM's context. [mtosatti: cleanup/beautify code] Signed-off-by: Stephan Baerwolf <stephan.baerwolf@tu-ilmenau.de> Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
2012-01-31sh: use the the PCI channels's io_map_baseMichael S. Tsirkin
commit 43db595e8b5d78ce5ad2feab719814a76e3ad2e5 (sh: switch to GENERIC_PCI_IOMAP) failed to take into account the PCI channels's io_map_base for mapping IO BARs. This also caused a new warning on sh. Fix this, without re-introducing code duplication, by setting NO_GENERIC_PCI_IOPORT_MAP and supplying a sh-specific __pci_ioport_map. Reported-by: Kevin Cernekee <cernekee@gmail.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2012-01-31mips: use the the PCI controller's io_map_baseMichael S. Tsirkin
commit eab90291d35438bcebf7c3dc85be66d0f24e3002 (mips: switch to GENERIC_PCI_IOMAP) failed to take into account the PCI controller's io_map_base for mapping IO BARs. This also caused a new warning on mips. Fix this, without re-introducing code duplication, by setting NO_GENERIC_PCI_IOPORT_MAP and supplying a mips-specific __pci_ioport_map. Reported-by: Kevin Cernekee <cernekee@gmail.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2012-01-31Revert "microblaze: Add topology init"Michal Simek
This reverts commit d761f0c521868e59cd0bc59159cbdb4686fe210d. Patch: "cpu: Register a generic CPU device on architectures that currently do not" (sha1: 9f13a1fd452f11c18004ba2422a6384b424ec8a9) selects GENERIC_CPU_DEVICES for Microblaze which register cpu. My patch was done in the same time that's why cpu was registered twice which caused this warning log: ------------[ cut here ]------------ WARNING: at fs/sysfs/dir.c:481 sysfs_add_one+0xb0/0xdc() sysfs: cannot create duplicate filename '/devices/system/cpu/cpu0' Modules linked in: ... Signed-off-by: Michal Simek <monstr@monstr.eu>
2012-01-30Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux: [S390] dasd: revalidate server for new pathgroup [S390] dasd: revert LCU optimization [S390] cleanup entry point definition
2012-01-30Merge branch 'next' of git://git.monstr.eu/linux-2.6-microblazeLinus Torvalds
* 'next' of git://git.monstr.eu/linux-2.6-microblaze: microblaze: generic atomic64 support
2012-01-30x86/reboot: Remove VersaLogic Menlow reboot quirkMichael D Labriola
This commit removes the reboot quirk originally added by commit e19e074 ("x86: Fix reboot problem on VersaLogic Menlow boards"). Testing with a VersaLogic Ocelot (VL-EPMs-21a rev 1.00 w/ BIOS 6.5.102) revealed the following regarding the reboot hang problem: - v2.6.37 reboot=bios was needed. - v2.6.38-rc1: behavior changed, reboot=acpi is needed, reboot=kbd and reboot=bios results in system hang. - v2.6.38: VersaLogic patch (e19e074 "x86: Fix reboot problem on VersaLogic Menlow boards") was applied prior to v2.6.38-rc7. This patch sets a quirk for VersaLogic Menlow boards that forces the use of reboot=bios, which doesn't work anymore. - v3.2: It seems that commit 660e34c ("x86: Reorder reboot method preferences") changed the default reboot method to acpi prior to v3.0-rc1, which means the default behavior is appropriate for the Ocelot. No VersaLogic quirk is required. The Ocelot board used for testing can successfully reboot w/out having to pass any reboot= arguments for all 3 current versions of the BIOS. Signed-off-by: Michael D Labriola <michael.d.labriola@gmail.com> Cc: Matthew Garrett <mjg@redhat.com> Cc: Michael D Labriola <mlabriol@gdeb.com> Cc: Kushal Koolwal <kushalkoolwal@gmail.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Link: http://lkml.kernel.org/r/87vcnub9hu.fsf@gmail.com Signed-off-by: Ingo Molnar <mingo@elte.hu>
2012-01-30x86/reboot: Skip DMI checks if reboot set by userMichael D Labriola
Skip DMI checks for vendor specific reboot quirks if the user passed in a reboot= arg on the command line - we should never override user choices. Signed-off-by: Michael D Labriola <michael.d.labriola@gmail.com> Cc: Alan Cox <alan@lxorguk.ukuu.org.uk> Cc: Michael D Labriola <mlabriol@gdeb.com> Cc: Matthew Garrett <mjg@redhat.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Link: http://lkml.kernel.org/r/87wr8ab9od.fsf@gmail.com Signed-off-by: Ingo Molnar <mingo@elte.hu>
2012-01-29Merge branch 'fixes' of ↵Olof Johansson
git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into fixes * 'fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap: ARM: OMAP2+: arch/arm/mach-omap2/smartreflex.c: add missing iounmap ARM: OMAP2+: arch/arm/mach-omap2/devices.c: introduce missing kfree ARM: OMAP: fix MMC2 loopback clock handling ARM: OMAP: fix erroneous mmc2 clock change on mmc3 setup ARM: OMAP2+: GPMC: fix device size setup ARM: OMAP2+: timer: Fix crash due to wrong arg to __omap_dm_timer_read_counter ARM: OMAP3: hwmod data: register dss hwmods after dss_core ARM: OMAP2/3: PRM: fix missing plat/irqs.h build breakage ARM: OMAP2+: io: fix compilation breakage on 2420-only configs ARM: OMAP4: hwmod data: Add names for DMIC memory address space ARM: OMAP3: hwmod data: add SYSC_HAS_ENAWAKEUP for dispc ARM: OMAP2+: hwmod data: split omap2/3 dispc hwmod class ARM: OMAP2: fix regulator warnings ARM: OMAP2: fix omap3 touchbook kconfig warning i2c: OMAP: Fix OMAP1 build error
2012-01-29Merge branch 'fixes' of git://gitorious.org/linux-davinci/linux-davinci into ↵Olof Johansson
fixes * 'fixes' of git://gitorious.org/linux-davinci/linux-davinci: ARM: davinci: update mdio bus name ARM: davinci: DA850: remove non-existing pll1_sysclk4-7 clocks
2012-01-28Merge branch 'stable/for-linus-fixes-3.3' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/konrad/xen * 'stable/for-linus-fixes-3.3' of git://git.kernel.org/pub/scm/linux/kernel/git/konrad/xen: xen/granttable: Disable grant v2 for HVM domains. x86: xen: size struct xen_spinlock to always fit in arch_spinlock_t
2012-01-28Merge branch 'fixes' of git://git.linaro.org/people/rmk/linux-armLinus Torvalds
* 'fixes' of git://git.linaro.org/people/rmk/linux-arm: (31 commits) ARM: 7304/1: ioremap: fix boundary check when reusing static mapping ARM: 7301/1: Rename the T() macro to TUSER() to avoid namespace conflicts ARM: 7299/1: ftrace: clear zero bit in reported IPs for Thumb-2 ARM: 7298/1: realview: fix mapping of MPCore private memory region PCMCIA: fix sa1111 oops on remove ARM: 7288/1: mach-sa1100: add missing module_init() call ARM: 7297/1: smp_twd: make sure timer is stopped before registering it ARM: 7296/1: proc-v7.S: remove HARVARD_CACHE preprocessor guards ARM: 7295/1: cortex-a7: move proc_info out of !CONFIG_ARM_LPAE block ARM: 7293/1: logical_cpu_map: decouple CPU mapping from SMP ARM: 7291/1: cache: assume 64-byte L1 cachelines for ARMv7 CPUs ARM: 7290/1: vmlinux.lds.S: align the exception fixup table to a 4-byte boundary ARM: 7289/1: vmlinux.lds.S: do not hardcode cacheline size as 32 bytes MFD: ucb1x00-ts: fix resume failure MFD: ucb1x00-core: fix gpiolib direction_output handling MFD: ucb1x00-core: fix missing restore of io output data on resume MFD: mcp-core: fix mcp_priv() to be more type safe MFD: mcp-core: fix complaints from the genirq layer Revert "ARM: sa11x0: Implement autoloading of codec and codec pdata for mcp bus." Revert "ARM: sa1100: Refactor mcp-sa11x0 to use platform resources." ... Fix up conflict due to arch/arm/mach-mx5/Kconfig having been merged into mach-imx5 (commit 784a90c0a7d8: "ARM i.MX: Merge i.MX5 support into mach-imx"), but the ARM_L1_CACHE_SHIFT_6 entry was moved to be driven by the CPU_V7 logic from it in the old location in rmk's branch (commit a092f2b15399: "ARM: 7291/1: cache: assume 64-byte L1 cachelines for ARMv7 CPUs").
2012-01-28Merge tag 'fixes-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc arm-soc fixes for 3.3-rc: AT91 needed reset fixes which resulted in some minor code refactoring, it also adds a feature-removal for one of their platforms for 3.4. The USB patches have been acked by Greg K-H. i.MX and ux500 both have some minor fixes, nothing controversial. * tag 'fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: arch/arm/mach-imx/mach-mx53_ard.c: add missing iounmap ARM: imx: iomux-v1.h: Fix build error due to __init annotation ARM: at91: Fix at91sam9g45 and at91cap9 reset ARM: at91: make rstc soc independent ARM: at91: introduce AT91_SAM9_ALT_RESET to select the at91sam9 alternative reset ARM: at91: merge at91cap9_ddrsdr.h in at91sam9_ddrsdr.h ARM: at91: fix cap9 ddrsdr register ARM/USB: at91/ohci-at91: rename vbus_pin_inverted to vbus_pin_active_low USB: at91: fix clk_get error handling ARM: at91: removal of CAP9 SoC family ARM: at91: fix at91rm9200 soc subtype handling mach-ux500: no MMC_CAP_SD_HIGHSPEED on Snowball mach-ux500: enable ARM errata 764369 mach-ux500: do not override outer.inv_all mach-ux500: musb: now musb is always in OTG mode ARM: imx6: add missing twd_clk for imx6q clock
2012-01-28x86/dumpstack: Remove unneeded check in dump_trace()Dan Carpenter
Smatch complains that we have some inconsistent NULL checking. If "task" were NULL then it would lead to a NULL dereference later. We can remove this test because earlier on in the function we have: if (!task) task = current; Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Acked-by: Frederic Weisbecker <fweisbec@gmail.com> Cc: Namhyung Kim <namhyung@gmail.com> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Clemens Ladisch <clemens@ladisch.de> Link: http://lkml.kernel.org/r/20120128105246.GA25092@elgon.mountain Signed-off-by: Ingo Molnar <mingo@elte.hu>
2012-01-27ARM: 7304/1: ioremap: fix boundary check when reusing static mappingPawel Moll
Since commit 576d2f2525612ecb5af029a76f21f22a3b82563d "ARM: add generic ioremap optimization by reusing static mappings" ioremap() is trying to reuse existing static mapping when possible. The condition checking boundaries of the requested and existing mappings didn't take in-page offset into consideration though, which lead to obscure and hard to debug problems when requested mapping crossed end of the static one. Signed-off-by: Pawel Moll <pawel.moll@arm.com> Acked-by: Nicolas Pitre <nico@linaro.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2012-01-27ARM: davinci: update mdio bus nameSekhar Nori
Commit 5a05a8200a4359ef2bfe9094c137dee35cfdd516 ("davinci_emac: use an unique MDIO bus name") introduced during the v3.3 merge window updated the davinci mdio bus name to make it unique. Update the bus name in board files which use DaVinci MDIO bus to match the new name. Without this PHY is not detected with error like: PHY 0:01 not found net eth0: could not connect to phy 0:01 Tested on DM365 and DA850 EVMs. Cc: Florian Fainelli <florian@openwrt.org> Cc: David S. Miller <davem@davemloft.net> Signed-off-by: Sekhar Nori <nsekhar@ti.com>
2012-01-27Merge commit 'v3.3-rc1' into stable/for-linus-fixes-3.3Konrad Rzeszutek Wilk
* commit 'v3.3-rc1': (9775 commits) Linux 3.3-rc1 x86, syscall: Need __ARCH_WANT_SYS_IPC for 32 bits qnx4: don't leak ->BitMap on late failure exits qnx4: reduce the insane nesting in qnx4_checkroot() qnx4: di_fname is an array, for crying out loud... KEYS: Permit key_serial() to be called with a const key pointer keys: fix user_defined key sparse messages ima: fix cred sparse warning uml: fix compile for x86-64 MPILIB: Add a missing ENOMEM check tpm: fix (ACPI S3) suspend regression nvme: fix merge error due to change of 'make_request_fn' fn type xen: using EXPORT_SYMBOL requires including export.h gpio: tps65910: Use correct offset for gpio initialization acpi/apei/einj: Add extensions to EINJ from rev 5.0 of acpi spec intel_idle: Split up and provide per CPU initialization func ACPI processor: Remove unneeded variable passed by acpi_processor_hotadd_init V2 tg3: Fix single-vector MSI-X code openvswitch: Fix multipart datapath dumps. ipv6: fix per device IP snmp counters ...
2012-01-26Merge branch 'imx-fixes' of git://git.pengutronix.de/git/imx/linux-2.6 into ↵Olof Johansson
fixes * 'imx-fixes' of git://git.pengutronix.de/git/imx/linux-2.6: arch/arm/mach-imx/mach-mx53_ard.c: add missing iounmap ARM: imx: iomux-v1.h: Fix build error due to __init annotation
2012-01-26Merge branch 'fixes-for-arm-soc' of ↵Olof Johansson
git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-stericsson into fixes * 'fixes-for-arm-soc' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-stericsson: mach-ux500: no MMC_CAP_SD_HIGHSPEED on Snowball mach-ux500: enable ARM errata 764369 mach-ux500: do not override outer.inv_all mach-ux500: musb: now musb is always in OTG mode
2012-01-26Merge branch 'imx6/fixes' of git://git.linaro.org/people/shawnguo/linux-2.6 ↵Olof Johansson
into fixes * 'imx6/fixes' of git://git.linaro.org/people/shawnguo/linux-2.6: ARM: imx6: add missing twd_clk for imx6q clock
2012-01-26Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparcLinus Torvalds
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparc: sparc32: forced setting of mode of sun4m per-cpu timers