summaryrefslogtreecommitdiff
path: root/arch
AgeCommit message (Collapse)Author
2009-05-11x86, boot: make kernel_alignment adjustable; new bzImage fieldsH. Peter Anvin
Make the kernel_alignment field adjustable; this allows us to set it to a large value (intended to be 16 MB to avoid ZONE_DMA contention, memory holes and other weirdness) while a smart bootloader can still force a loading at a lesser alignment if absolutely necessary. Also export pref_address (preferred loading address, corresponding to the link-time address) and init_size, the total amount of linear memory the kernel will require during initialization. [ Impact: allows better kernel placement, gives bootloader more info ] Signed-off-by: H. Peter Anvin <hpa@zytor.com>
2009-05-11x86, boot: remove dead code from boot/compressed/head_*.SH. Peter Anvin
Remove a couple of lines of dead code from arch/x86/boot/compressed/head_*.S; all of these update registers that are dead in the current code. [ Impact: cleanup ] Signed-off-by: H. Peter Anvin <hpa@zytor.com>
2009-05-11x86, boot: use LOAD_PHYSICAL_ADDR on 64 bitsH. Peter Anvin
Use LOAD_PHYSICAL_ADDR instead of CONFIG_PHYSICAL_START in the 64-bit decompression code, for equivalence with the 32-bit code. [ Impact: cleanup, increases code similarity ] Signed-off-by: H. Peter Anvin <hpa@zytor.com>
2009-05-11x86, boot: make symbols from the main vmlinux availableH. Peter Anvin
Make symbols from the main vmlinux, as opposed to just compressed/vmlinux, available to header.S. Also, export a few additional symbols. This will be used in a subsequent patch to export the total memory footprint of the kernel. [ Impact: enable future enhancement ] Signed-off-by: H. Peter Anvin <hpa@zytor.com>
2009-05-08x86, boot: determine compressed code offset at compile timeH. Peter Anvin
Determine the compressed code offset (from the kernel runtime address) at compile time. This allows some minor optimizations in arch/x86/boot/compressed/head_*.S, but more importantly it makes this value available to the build process, which will enable a future patch to export the necessary linear memory footprint into the bzImage header. [ Impact: cleanup, future patch enabling ] Signed-off-by: H. Peter Anvin <hpa@zytor.com>
2009-05-08x86, boot: use appropriate rep string for move and clearH. Peter Anvin
In the pre-decompression code, use the appropriate largest possible rep movs and rep stos to move code and clear bss, respectively. For reverse copy, do note that the initial values are supposed to be the address of the first (highest) copy datum, not one byte beyond the end of the buffer. rep strings are not necessarily the fastest way to perform these operations on all current processors, but are likely to be in the future, and perhaps more importantly, we want to encourage the architecturally right thing to do here. This also fixes a couple of trivial inefficiencies on 64 bits. [ Impact: trivial performance enhancement, increase code similarity ] Signed-off-by: H. Peter Anvin <hpa@zytor.com>
2009-05-08x86, boot: zero EFLAGS on 32 bitsH. Peter Anvin
The 64-bit code already clears EFLAGS as soon as it has a stack. This seems like a reasonable precaution, so do it on 32 bits as well. [ Impact: extra paranoia ] Signed-off-by: H. Peter Anvin <hpa@zytor.com>
2009-05-08x86, boot: set up the decompression stack as early as possibleH. Peter Anvin
Set up the decompression stack as soon as we know where it needs to go. That way we have a full-service stack as soon as possible, rather than relying on the BP_scratch field. Note that the stack does need to be empty during bss zeroing (or else the stack needs to be moved out of the bss segment, which is also an option.) [ Impact: cleanup, minor paranoia ] Signed-off-by: H. Peter Anvin <hpa@zytor.com>
2009-05-08x86, boot: straighten out ranges to copy/zero in compressed/head*.SH. Peter Anvin
Both on 32 and 64 bits, we copy all the way up to the end of bss, except that on 64 bits there is a hack to avoid copying on top of the page tables. There is no point in copying bss at all, especially since we are just about to zero it all anyway. To clean up and unify the handling, we now do: - copy from startup_32 to _bss. - zero from _bss to _ebss. - the _ebss symbol is aligned to an 8-byte boundary. - the page tables are moved to a separate section. Use _bss as the copy endpoint since _edata may be misaligned. [ Impact: cleanup, trivial performance improvement ] Signed-off-by: H. Peter Anvin <hpa@zytor.com>
2009-05-08x86, boot: stylistic cleanups for boot/compressed/head_64.SH. Peter Anvin
Clean up style issues in arch/x86/boot/compressed/head_64.S. This file had a lot fewer style issues than its 32-bit cousin, but the ones it has are worth fixing, especially since it makes the two files more similar. [ Impact: cleanup, no object code change ] Signed-off-by: H. Peter Anvin <hpa@zytor.com>
2009-05-08x86, boot: stylistic cleanups for boot/compressed/head_32.SH. Peter Anvin
Reformat arch/x86/boot/compressed/head_32.S to be closer to currently preferred kernel assembly style, that is: - opcode and operand separated by tab - operands separated by ", " - C-style comments This also makes it more similar to head_64.S. [ Impact: cleanup, no object code change ] Signed-off-by: H. Peter Anvin <hpa@zytor.com>
2009-05-08x86, boot: use BP_scratch in arch/x86/boot/compressed/head_*.SH. Peter Anvin
Use the BP_scratch symbol from asm-offsets.h instead of hard-coding the location. [ Impact: cleanup ] Signed-off-by: H. Peter Anvin <hpa@zytor.com>
2009-05-08x86, boot: follow standard Kbuild style for compression suffixH. Peter Anvin
When generating the compression suffix in arch/x86/boot/compressed/Makefile, follow standard Kbuild conventions, that is: - Use a dash not underscore before y/m/n endings - Use := whenever possible. Requested-by: Sam Ravnborg <sam@ravnborg.org> Signed-off-by: H. Peter Anvin <hpa@zytor.com>
2009-05-08x86, boot: simplify arch/x86/boot/compressed/MakefileH. Peter Anvin
Simplify the arch/x86/boot/compressed/Makefile, by using the new capability of specifying multiple inputs to a compressor, and the CONFIG_X86_NEED_RELOCS Kconfig symbol. Signed-off-by: H. Peter Anvin <hpa@zytor.com> Acked-by: Sam Ravnborg <sam@ravnborg.org>
2009-05-08x86: add a Kconfig symbol for when relocations are neededH. Peter Anvin
We only need to build relocations when we are building a 32-bit relocatable kernel. Rather than unnecessarily complicating the Makefiles, make an explicit Kbuild symbol for this. [ Impact: permits future cleanup ] Signed-off-by: H. Peter Anvin <hpa@zytor.com> Cc: Sam Ravnborg <sam@ravnborg.org>
2009-05-08x86, boot: align the .bss section in the decompressorH. Peter Anvin
Aligning the .bss section makes it trivial to use large operation sizes for moving the initialized sections and clearing the .bss. The alignment chosen (L1 cache) is somewhat arbitrary, but should be large enough to avoid all known performance traps and small enough to not cause troubles. [ Impact: trivial performance enhancement, future patch prep ] Signed-off-by: H. Peter Anvin <hpa@zytor.com>
2009-04-30x86: boot/compressed/vmlinux.lds.S: fix build of bzImage with 64 bit compilerSam Ravnborg
Jesper reported that he saw following build issue: > ld:arch/x86/boot/compressed/vmlinux.lds:9: syntax error > make[2]: *** [arch/x86/boot/compressed/vmlinux] Error 1 > make[1]: *** [arch/x86/boot/compressed/vmlinux] Error 2 > make: *** [bzImage] Error 2 CPP defines the symbol "i386" to "1". Undefine this to fix it. [ Impact: build fix with certain tool chains ] Reported-by: Jesper Dangaard Brouer <jdb@comx.dk> Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> LKML-Reference: <alpine.LFD.2.00.0904260958190.3101@localhost.localdomain> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-04-29x86, vmlinux.lds: fix relocatable symbolsIngo Molnar
__init_begin/_end symbols should be inside sections as well, otherwise the relocatable kernel gets confused when freeing init sections in the wrong place. [ Impact: fix bootup crash ] Cc: Sam Ravnborg <sam@ravnborg.org> Cc: Tim Abbott <tabbott@MIT.EDU> Cc: Linus Torvalds <torvalds@linux-foundation.org> LKML-Reference: <20090429105056.GA28720@uranus.ravnborg.org> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-04-29x86, vmlinux.lds: add copyrightIngo Molnar
Acked-by: Sam Ravnborg <sam@ravnborg.org> Cc: Tim Abbott <tabbott@MIT.EDU> Cc: Linus Torvalds <torvalds@linux-foundation.org> LKML-Reference: <1240991249-27117-2-git-send-email-sam@ravnborg.org> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-04-29x86, vmlinux.lds: unify remaining partsSam Ravnborg
32 bit: - explicit page align .bss - move ALING() out of .brk output section - discard *(.eh_frame) 64 bit: - move ALIGN() out of .bss output section - move ALIGN() out of .brk output section - use a dedicated section to define _end [ Impact: unify and fix section alignments in linker script ] Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Cc: Tim Abbott <tabbott@MIT.EDU> Cc: Linus Torvalds <torvalds@linux-foundation.org> LKML-Reference: <1240991249-27117-13-git-send-email-sam@ravnborg.org> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-04-29x86, vmlinux.lds: unify percpuSam Ravnborg
32 bit: - move __init_end outside the .bss output section It really did not belong in there [ Impact: 64-bit: cleanup, 32-bit: refactor linker script ] Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Cc: Tim Abbott <tabbott@MIT.EDU> Cc: Linus Torvalds <torvalds@linux-foundation.org> LKML-Reference: <1240991249-27117-12-git-send-email-sam@ravnborg.org> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-04-29x86, vmlinux.lds: unify .exit.* and .init.ramfsSam Ravnborg
[ Impact: cleanup ] Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Cc: Tim Abbott <tabbott@MIT.EDU> Cc: Linus Torvalds <torvalds@linux-foundation.org> LKML-Reference: <1240991249-27117-11-git-send-email-sam@ravnborg.org> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-04-29x86, vmlinux.lds: unify parainstructionsSam Ravnborg
32 bit: - increase alignment from 4 to 8 for .parainstructions - increase alignment from 4 to 8 for .altinstructions 64 bit: - move ALIGN() outside output section for .altinstructions None of the above should result in any functional change. [ Impact: refactor and unify linker script ] Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Cc: Tim Abbott <tabbott@MIT.EDU> Cc: Linus Torvalds <torvalds@linux-foundation.org> LKML-Reference: <1240991249-27117-10-git-send-email-sam@ravnborg.org> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-04-29x86, vmlinux.lds: unify first part of initdataSam Ravnborg
32-bit: - Move definition of __init_begin outside output_section because it covers more than one section - Move ALIGN() for end-of-section inside .smp_locks output section. Same effect but the intent is better documented that we need both start and end aligned. 64-bit: - Move ALIGN() outside output section in .init.setup - Deleted unused __smp_alt_* symbols None of the above should result in any functional change. [ Impact: refactor and unify linker script ] Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Cc: Tim Abbott <tabbott@MIT.EDU> Cc: Linus Torvalds <torvalds@linux-foundation.org> LKML-Reference: <1240991249-27117-9-git-send-email-sam@ravnborg.org> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-04-29x86, vmlinux.lds: move vsyscall output sectionsSam Ravnborg
[ Impact: cleanup ] Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Cc: Tim Abbott <tabbott@MIT.EDU> Cc: Linus Torvalds <torvalds@linux-foundation.org> LKML-Reference: <1240991249-27117-8-git-send-email-sam@ravnborg.org> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-04-29x86, vmlinux.lds: unify data output sectionsSam Ravnborg
For 64 bit the following functional changes are introduced: - .data.page_aligned has moved - .data.cacheline_aligned has moved - .data.read_mostly has moved - ALIGN() moved out of output section for .data.cacheline_aligned - ALIGN() moved out of output section for .data.page_aligned Notice that 32 bit and 64 bit has different location of _edata. .data_nosave is 32 bit only as 64 bit is special due to PERCPU. [ Impact: 32-bit: cleanup, 64-bit: use 32-bit linker script ] Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Cc: Tim Abbott <tabbott@MIT.EDU> Cc: Linus Torvalds <torvalds@linux-foundation.org> LKML-Reference: <1240991249-27117-7-git-send-email-sam@ravnborg.org> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-04-29x86, vmlinux.lds: unify exception tableSam Ravnborg
[ Impact: cleanup ] Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Cc: Tim Abbott <tabbott@MIT.EDU> Cc: Linus Torvalds <torvalds@linux-foundation.org> LKML-Reference: <1240991249-27117-6-git-send-email-sam@ravnborg.org> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-04-29x86, vmlinux.lds: unify .text output sectionsSam Ravnborg
32 bit x86 had a dedicated .text.head output section, whereas 64 bit had it all in a single output section. In the unified version the dedicated .text.head output section was kept to have full control over the head code. 32 bit: - Moved definition of _stext to the linker script. The definition is located _after_ .text.page_aligned as this is what 32 bit did before. The ALIGN(8) was introduced so we hit the exact same address (on the tested config) before and after the move. I assume that it is a bug that _stext did not cover the .text.page_aligned section - if this is true it can be fixed in a follow-up patch (and the ugly ALIGN() can be dropped). [ Impact: 64-bit: cleanup, 32-bit: use the 64-bit linker script ] Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Cc: Tim Abbott <tabbott@MIT.EDU> Cc: Linus Torvalds <torvalds@linux-foundation.org> LKML-Reference: <1240991249-27117-5-git-send-email-sam@ravnborg.org> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-04-29x86, vmlinux.lds: unify start/end of SECTIONSSam Ravnborg
[ Impact: cleanup ] Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Cc: Tim Abbott <tabbott@MIT.EDU> Cc: Linus Torvalds <torvalds@linux-foundation.org> LKML-Reference: <1240991249-27117-4-git-send-email-sam@ravnborg.org> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-04-29x86, vmlinux.lds: unify PHDRSSam Ravnborg
PHDRS are not equal for the two - so use ifdefs to cover up for that. On the assumption that they may become equal the ifdef is inside the PHDRS definiton. [ Impact: cleanup ] Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Cc: Tim Abbott <tabbott@MIT.EDU> Cc: Linus Torvalds <torvalds@linux-foundation.org> LKML-Reference: <1240991249-27117-3-git-send-email-sam@ravnborg.org> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-04-29x86, vmlinux.lds: unify header/footerSam Ravnborg
Merge everything except PHDRS and SECTIONS into vmlinux.lds.S. [ Impact: cleanup ] Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Cc: Tim Abbott <tabbott@MIT.EDU> Cc: Linus Torvalds <torvalds@linux-foundation.org> LKML-Reference: <1240991249-27117-2-git-send-email-sam@ravnborg.org> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-04-29x86: beautify vmlinux_32.lds.SSam Ravnborg
Beautify vmlinux_32.lds.S: - Use tabs for indent - Located curly braces like in C code - Rearranged a few comments To see actual differences use "git diff -b" which ignore 'whitespace' changes. The beautification is done to prepare a unification of the _32 and _64 variants of the linker scripts. [ Impact: cleanup ] Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Cc: Tim Abbott <tabbott@MIT.EDU> Cc: Linus Torvalds <torvalds@linux-foundation.org> LKML-Reference: <1240991249-27117-1-git-send-email-sam@ravnborg.org> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-04-27x86: unify arch/x86/boot/compressed/vmlinux_*.ldsLinus Torvalds
Look at the: diff -u arch/x86/boot/compressed/vmlinux_*.lds output and realize that they're basially exactly the same except for trivial naming differences, and the fact that the 64-bit version has a "pgtable" thing. So unify them. There's some trivial cleanup there (make the output format a Kconfig thing rather than doing #ifdef's for it, and unify both 32-bit and 64-bit BSS end to "_ebss", where 32-bit used to use the traditional "_end"), but other than that it's really very mindless and straigt conversion. For example, I think we should aim to remove "startup_32" vs "startup_64", and just call it "startup", and get rid of one more difference. I didn't do that. Also, notice the comment in the unified vmlinux.lds.S talks about "head_64" and "startup_32" which is an odd and incorrect mix, but that was actually what the old 64-bit only lds file had, so the confusion isn't new, and now that mixing is arguably more accurate thanks to the vmlinux.lds.S file being shared between the two cases ;) [ Impact: cleanup, unification ] Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Acked-by: Sam Ravnborg <sam@ravnborg.org> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-04-27x86: beautify vmlinux_64.lds.SSam Ravnborg
Beautify vmlinux_64.lds.S: - Use tabs for indent - Located curly braces like in C code - Rearranged a few comments There is no functional changes in this patch The beautification is done to prepare a unification of the _32 and the _64 variants of the linker scripts. [ Impact: cleanup ] Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Cc: Tim Abbott <tabbott@MIT.EDU> Cc: Linus Torvalds <torvalds@linux-foundation.org> LKML-Reference: <20090426210742.GA3464@uranus.ravnborg.org> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-04-16x86: standardize Kbuild rulesSam Ravnborg
Introducing this Kbuild file allow us to: make arch/x86/ And thus building all the core part of x86. Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Cc: Jaswinder Singh Rajput <jaswinder@kernel.org> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-04-15Merge branch 'merge' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/paulus/powerpc * 'merge' of git://git.kernel.org/pub/scm/linux/kernel/git/paulus/powerpc: powerpc: pseries/dtl.c should include asm/firmware.h powerpc: Fix data-corrupting bug in __futex_atomic_op powerpc/pseries: Set error_state to pci_channel_io_normal in eeh_report_reset() powerpc: Allow 256kB pages with SHMEM powerpc: Document new FSL I2C bindings and cleanup powerpc/mm: Fix compile warning powerpc/85xx: TQM8548: update defconfig powerpc/85xx: TQM8548: use proper phy-handles for enet2 and enet3 powerpc/85xx: TQM85xx: correct address of LM75 I2C device nodes powerpc: Add support for early tlbilx opcode powerpc: Fix tlbilx opcode
2009-04-15acpi-cpufreq: fix 'smp_call_function_many()' confusionLinus Torvalds
It turns out that 'smp_call_function_many()' doesn't work at all like 'smp_call_function_single()', and my change to Andrew's patch to use it rather than a loop over all CPU's acpi-cpufreq doesn't work. My bad. 'smp_call_function_many()' has two "features" (aka "documented bugs"): (a) it needs to be called with preemption disabled, because it uses smp_processor_id() without guarding the CPU lookup with 'get_cpu()' and 'put_cpu()' like the 'single' variant does. (b) even if the current CPU is part of the CPU mask, it won't do the call on that CPU. Still, we're better off trying to use 'smp_call_function_many()' than looping over CPU's, since it at least in theory allows us to use a broadcast IPI and do it all in parallel. So let's just work around the silly semantic bugs in that function. Reported-and-tested-by: Ali Gholami Rudi <ali@rudi.ir> Cc: Ingo Molnar <mingo@elte.hu> Cc: Andrew Morton <akpm@linux-foundation.org>, Cc: Rusty Russell <rusty@rustcorp.com.au> Cc: Dave Jones <davej@redhat.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-04-15powerpc: pseries/dtl.c should include asm/firmware.hSachin Sant
A randconfig build on powerpc failed with: dtl.c: In function 'dtl_init': dtl.c:238: error: implicit declaration of function 'firmware_has_feature' dtl.c:238: error: 'FW_FEATURE_SPLPAR' undeclared (first use in this function) - We need firmware.h for these definitions. Signed-off-by: Sachin Sant <sachinp@in.ibm.com> Signed-off-by: Jeremy Kerr <jk@ozlabs.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
2009-04-15powerpc: Fix data-corrupting bug in __futex_atomic_opPaul Mackerras
Richard Henderson pointed out that the powerpc __futex_atomic_op has a bug: it will write the wrong value if the stwcx. fails and it has to retry the lwarx/stwcx. loop, since 'oparg' will have been overwritten by the result from the first time around the loop. This happens because it uses the same register for 'oparg' (an input) as it uses for the result. This fixes it by using separate registers for 'oparg' and 'ret'. Cc: stable@kernel.org Signed-off-by: Paul Mackerras <paulus@samba.org>
2009-04-15powerpc/pseries: Set error_state to pci_channel_io_normal in eeh_report_reset()Mike Mason
While adding native EEH support to Emulex and Qlogic drivers, it was discovered that dev->error_state was set to pci_io_channel_normal too late in the recovery process. These drivers rely on error_state to determine if they can access the device in their slot_reset callback, thus error_state needs to be set to pci_io_channel_normal in eeh_report_reset(). Below is a detailed explanation (courtesy of Richard Lary) as to why this is necessary. Background: PCI MMIO or DMA accesses to a frozen slot generate additional EEH errors. If the number of additional EEH errors exceeds EEH_MAX_FAILS the adapter will be shutdown. To avoid triggering excessive EEH errors and an undesirable adapter shutdown, some drivers use the pci_channel_offline(dev) wrapper function to return a Boolean value based on the value of pci_dev->error_state to determine if PCI MMIO or DMA accesses are safe. If the wrapper returns TRUE, drivers must not make PCI MMIO or DMA access to their hardware. The pci_dev structure member error_state reflects one of three values, 1) pci_channel_io_normal, 2) pci_channel_io_frozen, 3) pci_channel_io_perm_failure. Function pci_channel_offline(dev) returns TRUE if error_state is pci_channel_io_frozen or pci_channel_io_perm_failure. The EEH driver sets pci_dev->error_state to pci_channel_io_frozen at the point where the PCI slot is frozen. Currently, the EEH driver restores dev->error_state to pci_channel_io_normal in eeh_report_resume() before calling the driver's resume callback. However, when the EEH driver calls the driver's slot_reset callback() from eeh_report_reset(), it incorrectly indicates the error state is still pci_channel_io_frozen. Waiting until eeh_report_resume() to restore dev->error_state to pci_channel_io_normal is too late for Emulex and QLogic FC drivers and any other drivers which are designed to use common code paths in these two cases: i) those called after the driver's slot_reset callback() and ii) those called after the PCI slot is frozen but before the driver's slot_reset callback is called. Case i) all driver paths executed to reinitialize the hardware after a reset and case ii) all code paths executed by driver kernel threads that run asynchronous to the main driver thread, such as interrupt handlers and worker threads to process driver work queues. Emulex and QLogic FC drivers are designed with common code paths which require that pci_channel_offline(dev) reflect the true state of the hardware. The state transitions that the hardware takes from Normal Operations to Slot Frozen to Reset to Normal Operations are documented in the Power Architecture™ Platform Requirements+ (PAPR+) in Table 75. PE State Control. PAPR defines the following 3 states: 0 -- Not reset, Not EEH stopped, MMIO load/store allowed, DMA allowed (Normal Operations) 1 -- Reset, Not EEH stopped, MMIO load/store disabled, DMA disabled 2 -- Not reset, EEH stopped, MMIO load/store disabled, DMA disabled (Slot Frozen) An EEH error places the slot in state 2 (Frozen) and the adapter driver is notified that an EEH error was detected. If the adapter driver returns PCI_ERS_RESULT_NEED_RESET, the EEH driver calls eeh_reset_device() to place the slot into state 1 (Reset) and eeh_reset_device completes by placing the slot into State 0 (Normal Operations). Upon return from eeh_reset_device(), the EEH driver calls eeh_report_reset, which then calls the adapter's slot_reset callback. At the time the adapter's slot_reset callback is called, the true state of the hardware is Normal Operations and should be accurately reflected by setting dev->error_state to pci_channel_io_normal. The current implementation of EEH driver does not do so and requires this change to correct this deficiency. Signed-off-by: Mike Mason <mmlnx@us.ibm.com> Acked-by: Linas Vepstas <linasvepstas@gmail.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
2009-04-15powerpc: Allow 256kB pages with SHMEMHugh Dickins
Now that shmem's divisions by zero and SHMEM_MAX_BYTES are fixed, let powerpc 256kB pages coexist with CONFIG_SHMEM again. Signed-off-by: Hugh Dickins <hugh@veritas.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
2009-04-14x86 microcode: revert some work_on_cpuHugh Dickins
Revert part of af5c820a3169e81af869c113e18ec7588836cd50 ("x86: cpumask: use work_on_cpu in arch/x86/kernel/microcode_core.c") That change is causing only one Intel CPU's microcode to be updated e.g. microcode: CPU3 updated from revision 0x9 to 0x17, date = 2005-04-22 where before it announced that also for CPU0 and CPU1 and CPU2. We cannot use work_on_cpu() in the CONFIG_MICROCODE_OLD_INTERFACE code, because Intel's request_microcode_user() involves a copy_from_user() from /sbin/microcode_ctl, which therefore needs to be on that CPU at the time. Signed-off-by: Hugh Dickins <hugh@veritas.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-04-14Merge branch 'fixes-for-linus' of git://git.monstr.eu/linux-2.6-microblazeLinus Torvalds
* 'fixes-for-linus' of git://git.monstr.eu/linux-2.6-microblaze: microblaze: Add missing FILE tag to MAINTAINERS microblaze: remove duplicated #include's microblaze: struct device - replace bus_id with dev_name() microblaze: Simplify copy_thread() microblaze: Add TIMESTAMPING constants to socket.h microblaze: Add missing empty ftrace.h file microblaze: Fix problem with removing zero length files
2009-04-14Merge git://git.kernel.org/pub/scm/linux/kernel/git/lethal/sh-2.6Linus Torvalds
* git://git.kernel.org/pub/scm/linux/kernel/git/lethal/sh-2.6: sh: Add in PCI bus for DMA API debugging. sh: Pre-allocate a reasonable number of DMA debug entries. sh: sh7786: modify usb setup timeout judgment bug. MAINTAINERS: Update sh architecture file patterns. sh: ap325: use edge control for ov772x camera sh: Plug in support for ARCH=sh64 using sh SRCARCH. sh: urquell: Fix up address mapping in board comments. sh: Add support for DMA API debugging. sh: Provide cpumask_of_pcibus() to fix NUMA build. sh: urquell: Add board comment sh: wire up sys_preadv/sys_pwritev() syscalls. sh: sh7785lcr: fix PCI address map for 32-bit mode sh: intc: Added resume from hibernation support to the intc
2009-04-14parport_pc: Fix build failure drivers/parport/parport_pc.c for powerpcTony Breeds
In commit 51dcdfec6a274afc1c6fce180d582add9ff512c0 ("parport: Use the PCI IRQ if offered") parport_pc_probe_port() gained an irqflags arg. This isn't being supplied on powerpc. This patch make powerpc fallback to the old behaviour, that is using "0" for irqflags. Fixes build failure: In file included from drivers/parport/parport_pc.c:68: arch/powerpc/include/asm/parport.h: In function 'parport_pc_find_nonpci_ports': arch/powerpc/include/asm/parport.h:32: error: too few arguments to function 'parport_pc_probe_port' arch/powerpc/include/asm/parport.h:32: error: too few arguments to function 'parport_pc_probe_port' arch/powerpc/include/asm/parport.h:32: error: too few arguments to function 'parport_pc_probe_port' make[3]: *** [drivers/parport/parport_pc.o] Error 1 Signed-off-by: Tony Breeds <tony@bakeyournoodle.com> Signed-off-by: Alan Cox <alan@linux.intel.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-04-14parport: Fix various uses of parport_pcAlan Cox
These got overlooked first time around. Signed-off-by: Alan Cox <alan@linux.intel.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-04-14microblaze: remove duplicated #include'sHuang Weiyi
Remove duplicated #include's in arch/microblaze/include/asm/io.h arch/microblaze/kernel/prom.c arch/microblaze/kernel/ptrace.c arch/microblaze/kernel/signal.c arch/microblaze/kernel/sys_microblaze.c Signed-off-by: Huang Weiyi <weiyi.huang@gmail.com> Signed-off-by: Michal Simek <monstr@monstr.eu>
2009-04-14microblaze: struct device - replace bus_id with dev_name()Michal Simek
Signed-off-by: Michal Simek <monstr@monstr.eu>
2009-04-14microblaze: Simplify copy_thread()Michal Simek
Removing nr parameter from copy_tread function commit 6f2c55b843836d26528c56a0968689accaedbc67 Signed-off-by: Michal Simek <monstr@monstr.eu>
2009-04-14microblaze: Add TIMESTAMPING constants to socket.hMichal Simek
This changes was introduce with commit: cb9eff097831007afb30d64373f29d99825d0068 net: new user space API for time stamping of incoming and outgoing packets Signed-off-by: Michal Simek <monstr@monstr.eu>
generated by cgit v1.2.3 (git 2.39.1) at 2024-06-29 21:38:08 +0000