summaryrefslogtreecommitdiff
path: root/arch
AgeCommit message (Collapse)Author
2008-10-31Merge branch 'master' of ↵David S. Miller
master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6 Conflicts: drivers/net/wireless/p54/p54common.c
2008-10-30Merge branch 'davem-fixes' of ↵David S. Miller
master.kernel.org:/pub/scm/linux/kernel/git/jgarzik/netdev-2.6
2008-10-31gianfar: Fix race in TBI/SerDes configurationTrent Piepho
The init_phy() function attaches to the PHY, then configures the SerDes<->TBI link (in SGMII mode). The TBI is on the MDIO bus with the PHY (sort of) and is accessed via the gianfar's MDIO registers, using the functions gfar_local_mdio_read/write(), which don't do any locking. The previously attached PHY will start a work-queue on a timer, and probably an irq handler as well, which will talk to the PHY and thus use the MDIO bus. This uses phy_read/write(), which have locking, but not against the gfar_local_mdio versions. The result is that PHY code will try to use the MDIO bus at the same time as the SerDes setup code, corrupting the transfers. Setting up the SerDes before attaching to the PHY will insure that there is no race between the SerDes code and *our* PHY, but doesn't fix everything. Typically the PHYs for all gianfar devices are on the same MDIO bus, which is associated with the first gianfar device. This means that the first gianfar's SerDes code could corrupt the MDIO transfers for a different gianfar's PHY. The lock used by phy_read/write() is contained in the mii_bus structure, which is pointed to by the PHY. This is difficult to access from the gianfar drivers, as there is no link between a gianfar device and the mii_bus which shares the same MDIO registers. As far as the device layer and drivers are concerned they are two unrelated devices (which happen to share registers). Generally all gianfar devices' PHYs will be on the bus associated with the first gianfar. But this might not be the case, so simply locking the gianfar's PHY's mii bus might not lock the mii bus that the SerDes setup code is going to use. We solve this by having the code that creates the gianfar platform device look in the device tree for an mdio device that shares the gianfar's registers. If one is found the ID of its platform device is saved in the gianfar's platform data. A new function in the gianfar mii code, gfar_get_miibus(), can use the bus ID to search through the platform devices for a gianfar_mdio device with the right ID. The platform device's driver data is the mii_bus structure, which the SerDes setup code can use to lock the current bus. Signed-off-by: Trent Piepho <tpiepho@freescale.com> CC: Andy Fleming <afleming@freescale.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-10-30Merge git://git.kernel.org/pub/scm/linux/kernel/git/rusty/linux-2.6-for-linusLinus Torvalds
* git://git.kernel.org/pub/scm/linux/kernel/git/rusty/linux-2.6-for-linus: lguest: fix irq vectors. lguest: fix early_ioremap. lguest: fix example launcher compile after moved asm-x86 dir.
2008-10-30Merge branch 'x86-fixes-for-linus-2' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip * 'x86-fixes-for-linus-2' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: x86: cpu_index build fix x86/voyager: fix missing cpu_index initialisation x86/voyager: fix compile breakage caused by dc1e35c6e95e8923cf1d3510438b63c600fee1e2 x86: fix /dev/mem mmap breakage when PAT is disabled x86/voyager: fix compile breakage casued by x86: move prefill_possible_map calling early x86: use CONFIG_X86_SMP instead of CONFIG_SMP x86/voyager: fix boot breakage caused by x86: boot secondary cpus through initial_code x86, uv: fix compile error in uv_hub.h i386/PAE: fix pud_page() x86: remove debug code from arch_add_memory() x86: start annotating early ioremap pointers with __iomem x86: two trivial sparse annotations x86: fix init_memory_mapping for [dc000000 - e0000000) - v2
2008-10-31lguest: fix irq vectors.Rusty Russell
do_IRQ: cannot handle IRQ -1 vector 0x20 cpu 0 ------------[ cut here ]------------ kernel BUG at arch/x86/kernel/irq_32.c:219! We're not ISA: we have a 1:1 mapping from vectors to irqs. Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
2008-10-31lguest: fix early_ioremap.Rusty Russell
dmi_scan_machine breaks under lguest: lguest: unhandled trap 14 at 0xc04edeae (0xffa00000) This is because we use current_cr3 for the read_cr3() paravirt function, and it isn't set until the first cr3 change. We got away with it until this happened. Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
2008-10-31x86: cpu_index build fixIngo Molnar
fix: arch/x86/kernel/cpu/common.c: In function 'early_identify_cpu': arch/x86/kernel/cpu/common.c:553: error: 'struct cpuinfo_x86' has no member named 'cpu_index' as cpu_index is only available on SMP. Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-10-31x86/voyager: fix missing cpu_index initialisationJames Bottomley
Impact: fix /proc/cpuinfo output on x86/Voyager Ever since | commit 92cb7612aee39642d109b8d935ad265e602c0563 | Author: Mike Travis <travis@sgi.com> | Date: Fri Oct 19 20:35:04 2007 +0200 | | x86: convert cpuinfo_x86 array to a per_cpu array We've had an extra field in cpuinfo_x86 which is cpu_index. Unfortunately, voyager has never initialised this, although the only noticeable impact seems to be that /proc/cpuinfo shows all zeros for the processor ids. Anyway, fix this by initialising the boot CPU properly and setting the index when the secondaries update. Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-10-31x86/voyager: fix compile breakage caused by ↵James Bottomley
dc1e35c6e95e8923cf1d3510438b63c600fee1e2 Impact: build fix on x86/Voyager Given commits like this: | Author: Suresh Siddha <suresh.b.siddha@intel.com> | Date: Tue Jul 29 10:29:19 2008 -0700 | | x86, xsave: enable xsave/xrstor on cpus with xsave support Which deliberately expose boot cpu dependence to pieces of the system, I think it's time to explicitly have a variable for it to prevent this continual misassumption that the boot CPU is zero. Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-10-30Merge master.kernel.org:/home/rmk/linux-2.6-armLinus Torvalds
* master.kernel.org:/home/rmk/linux-2.6-arm: [ARM] 5326/1: AFEB9260: Fix for i2c_board_info structure [ARM] mx31ads: Add missing include [ARM] MXC: Fix mxc_gpio_get(), which must read PSR register instead DR. [ARM] MX3: Use ioremap wrapper to map SoC devices nonshared [ARM] gpio_free might sleep, arm architecture [ARM] ep93xx: fix OHCI DMA mask leds: da903x: (da9030 only) led brightness reversed. [ARM] sharpsl_pm: fix compilation w/o CONFIG_PM [ARM] pcm037: map AIPS1 and AIPS2 as nonshared area [ARM] build fixes for netX serial driver [ARM] 5323/1: Remove outdated empeg documentation. [ARM] 5299/1: Add maintainer for Mobilepro 900/c [ARM] corgi_lcd: fix simultaneous compilation with corgi_bl [ARM] pxa/spitz: fix spi cs on spitz [ARM] 5322/1: Fix fastpath issue in mmci.c [ARM] xsc3: revert writethrough memory-type encoding change
2008-10-30x86: fix /dev/mem mmap breakage when PAT is disabledRavikiran G Thirumalai
Impact: allow /dev/mem mmaps on non-PAT CPUs/platforms Fix mmap to /dev/mem when CONFIG_X86_PAT is off and CONFIG_STRICT_DEVMEM is off mmap to /dev/mem on kernel memory has been failing since the introduction of PAT (CONFIG_STRICT_DEVMEM=n case). Seems like the check to avoid cache aliasing with PAT is kicking in even when PAT is disabled. The bug seems to have crept in 2.6.26. This patch makes sure that the mmap to regular kernel memory succeeds if CONFIG_STRICT_DEVMEM=n and PAT is disabled, and the checks to avoid cache aliasing still happens if PAT is enabled. Signed-off-by: Ravikiran Thirumalai <kiran@scalex86.org> Tested-by: Tim Sirianni <tim@scalemp.com> Cc: <stable@kernel.org> Acked-by: H. Peter Anvin <hpa@zytor.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-10-30x86/voyager: fix compile breakage casued by x86: move prefill_possible_map ↵James Bottomley
calling early Impact: fix build failure on x86/Voyager Before: | commit 329513a35d1a2b6b28d54f5c2c0dde4face8200b | Author: Yinghai Lu <yhlu.kernel@gmail.com> | Date: Wed Jul 2 18:54:40 2008 -0700 | | x86: move prefill_possible_map calling early prefill_possible_mask() was hidden under CONFIG_HOTPLUG_CPU rendering it invisitble to voyager. Since this commit it's exposed, but not provided by the voyager subarch, so add a dummy stub to fix the link breakage. Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com> Cc: Yinghai Lu <yhlu.kernel@gmail.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-10-30x86: use CONFIG_X86_SMP instead of CONFIG_SMPJames Bottomley
Impact: fix x86/Voyager boot CONFIG_SMP is used for features which work on *all* x86 boxes. CONFIG_X86_SMP is used for standard PC like x86 boxes (for things like multi core and apics) Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-10-30x86/voyager: fix boot breakage caused by x86: boot secondary cpus through ↵James Bottomley
initial_code Impact: boot up secondary CPUs as well on x86/Voyager systems This commit: | commit 3e9704739daf46a8ba6593d749c67b5f7cd633d2 | Author: Glauber Costa <gcosta@redhat.com> | Date: Wed May 28 13:01:54 2008 -0300 | | x86: boot secondary cpus through initial_code removed the use of initialize_secondary. However, it didn't update voyager, so the secondary cpus no longer boot. Fix this by adding the initial_code switch to voyager as well. Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com> Cc: Glauber Costa <gcosta@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-10-30Merge branch 'upstream' of git://ftp.linux-mips.org/pub/scm/upstream-linusLinus Torvalds
* 'upstream' of git://ftp.linux-mips.org/pub/scm/upstream-linus: CHAR: Delete old and now unused M48T35 RTC driver for SGI IP27. CHAR: Delete old and now unused DS1286 driver. MIPS: Sort out CPU type to name translation. MIPS: Use the new byteorder headers MIPS: Probe for watch registers on cores of all vendors, not just MTI. MIPS: Switch FPU emulator trap to BREAK instruction. MIPS: SMP: Do not initialize __cpu_number_map/__cpu_logical_map for CPU 0. MIPS: Consider value of c0_ebase when computing value of exception base. MIPS: Clean up MIPSxx-optimized bitop functions MIPS: New feature test macro cpu_has_mips_r MIPS: RBTX4927: Add GPIO-LED support MIPS: TXx9: Fix RBTX4939 ethernet address initialization
2008-10-30Merge branch 'x86-fixes-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip * 'x86-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: x86, gart: fix gart detection for Fam11h CPUs x86: 64 bit print out absent pages num too x86, kdump: fix invalid access on i386 sparsemem x86: fix APIC_DEBUG with inquire_remote_apic x86: AMD microcode patch loader author update x86: microcode patch loader author update mailmap: add Peter Oruba x86, bts: improve help text for BTS config doc/x86: fix doc subdirs
2008-10-30Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/jbarnes/pci-2.6 * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jbarnes/pci-2.6: x86/PCI: build failure at x86/kernel/pci-dma.c with !CONFIG_PCI
2008-10-30x86, uv: fix compile error in uv_hub.hMike Travis
Impact: include file dependency cleanup Fix compile errors of files that include asm/uv/uv_hub.h but do not include linux/timer.h. [ such files are not mainline right now. ] Signed-of-by: Mike Travis <travis@sgi.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-10-30.gitignore updatesAlexey Dobriyan
Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-10-30[ARM] 5326/1: AFEB9260: Fix for i2c_board_info structureSergey Lapin
i2c_board_info array was filled incorrectly. Due to circumstances, the way it is filled works. This patch fills array properly. Signed-off-by: Sergey Lapin <slapin@ossfans.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-10-30Merge branch 'for-rmk-rc' of ↵Russell King
git://pasiphae.extern.pengutronix.de/git/imx/linux-2.6
2008-10-30[ARM] mx31ads: Add missing includeSascha Hauer
mx31ads_defconfig compilation failed with arch/arm/mach-mx3/mx31ads.c: In function 'mxc_init_imx_uart': arch/arm/mach-mx3/mx31ads.c:102: error: 'mxc_uart_device0' undeclared (first use in this function) arch/arm/mach-mx3/mx31ads.c:102: error: (Each undeclared identifier is reported only once arch/arm/mach-mx3/mx31ads.c:102: error: for each function it appears in.) make[1]: *** [arch/arm/mach-mx3/mx31ads.o] Error 1 Add missing include Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2008-10-30[ARM] MXC: Fix mxc_gpio_get(), which must read PSR register instead DR.Darius Augulis
The Data register holds the value we have written to a gpio. To get the input value we must read the Pad Status Register MX3 (or Sample Status register in MX1/2 terms) Signed-off-by: Darius Augulis <augulis.darius@gmail.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2008-10-30[ARM] MX3: Use ioremap wrapper to map SoC devices nonsharedSascha Hauer
The internal devices of the MX3 Processor have to be mapped MT_DEVICE_NONSHARED devices, otherwise cache corruptions occur. Signed-off-by: Guennadi Liakhovetski <lg@denx.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2008-10-30CHAR: Delete old and now unused M48T35 RTC driver for SGI IP27.Ralf Baechle
It was only used by this one SGI platform which recently was converted to RTC_LIB and with RTC_LIB enabled the legacy drivers are no more selectable. Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2008-10-30CHAR: Delete old and now unused DS1286 driver.Ralf Baechle
It was only used by two SGI platforms which recently were converted to RTC_LIB and with RTC_LIB enabled the legacy drivers are no more selectable. Signed-off-by: Ralf Baechle <ralf@linux-mips.org> Signed-off-by: Yoichi Yuasa <yoichi_yuasa@tripeaks.co.jp>
2008-10-30MIPS: Sort out CPU type to name translation.Ralf Baechle
As noticed by David Daney <ddaney@caviumnetworks.com>, the old long switch statement did not comply with the Linux C coding style. It was also yet another place of code to be changed when adding a new processor type leading to annoying bugs for example in /proc/cpuinfo. Fixed by moving the setting of the CPU type string into the core of the probing code and a few BUG_ON() test to ensure the CPU probing code indeed did its job and removing multiple now redundant tests. Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2008-10-30MIPS: Use the new byteorder headersHarvey Harrison
Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2008-10-30MIPS: Probe for watch registers on cores of all vendors, not just MTI.Ralf Baechle
Signed-off-by: Ralf Baechle <ralf@linux-mips.org> Acked-by: David Daney <ddaney@caviumnetworks.com>
2008-10-30MIPS: Switch FPU emulator trap to BREAK instruction.Ralf Baechle
Arguably using the address error handler has always been ugly. But with processors that handle unaligned loads and stores in hardware the current mechanism ceases to work so switch it to a BREAK instruction and allocate break code 514 to the FPU emulator. Yoichi Yuasa provided a build fix for CONFIG_BUG=n. Signed-off-by: Ralf Baechle <ralf@linux-mips.org> Signed-off-by: Yoichi Yuasa <yoichi_yuasa@tripeaks.co.jp>
2008-10-30MIPS: SMP: Do not initialize __cpu_number_map/__cpu_logical_map for CPU 0.Ralf Baechle
A system isn't necessarily booted on physical processor 0 as this code assumes. Also the array happens to be allocated in .bss so it's zero initialized anyway. Systems which need to override this can do so in their mp_ops->smp_setup() method. Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2008-10-30MIPS: Consider value of c0_ebase when computing value of exception base.David Daney
It just so happens to be zero on all currently supported systems so this hasn't bitten yet ... [Ralf: Original patch from Cavium; handling of set_uncached_handler() and de-ifdef'ed trap_init() implementation by me.] Signed-off-by: Tomaso Paoletti <tpaoletti@caviumnetworks.com> Signed-off-by: David Daney <ddaney@caviumnetworks.com> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2008-10-30MIPS: Clean up MIPSxx-optimized bitop functionsRalf Baechle
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2008-10-30MIPS: New feature test macro cpu_has_mips_rRalf Baechle
cpu_has_mips_r is true if a processor is MIPS32 or MIPS64, any architecture revision. Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2008-10-30MIPS: RBTX4927: Add GPIO-LED supportAtsushi Nemoto
Signed-off-by: Atsushi Nemoto <anemo@mba.ocn.ne.jp> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2008-10-30MIPS: TXx9: Fix RBTX4939 ethernet address initializationAtsushi Nemoto
Fix location of ethernet adddress when booted from external ROM. Signed-off-by: Atsushi Nemoto <anemo@mba.ocn.ne.jp> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2008-10-30[ARM] gpio_free might sleep, arm architectureUwe Kleine-König
According to the documentation gpio_free should only be called from task context only. To make this more explicit add a might sleep to all implementations. This patch changes the gpio_free implementations for the arm architecture. DaVinci is skipped on purpose to simplify the merge process for patches switching it over to use gpiolib as per request by David Brownell. Signed-off-by: Uwe Kleine-König <ukleinek@informatik.uni-freiburg.de> Cc: David Brownell <david-b@pacbell.net> Cc: Andrew Victor <linux@maxim.org.za> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-10-30[ARM] ep93xx: fix OHCI DMA maskMatthias Kaehlcke
Signed-off-by: Matthias Kaehlcke <matthias@kaehlcke.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-10-30Merge branch 'fix' of ↵Russell King
git://git.kernel.org/pub/scm/linux/kernel/git/ycmiao/pxa-linux-2.6
2008-10-30[ARM] sharpsl_pm: fix compilation w/o CONFIG_PMDmitry Baryshkov
Fix compilation of sharpsl_pm when CONFIG_PM in unselected. Signed-off-by: Dmitry Baryshkov <dbaryshkov@gmail.com> Acked-by: Russell King <rmk+kernel@arm.linux.org.uk> Signed-off-by: Eric Miao <eric.miao@marvell.com>
2008-10-30i386/PAE: fix pud_page()Jan Beulich
Impact: cleanup To the unsuspecting user it is quite annoying that this broken and inconsistent with x86-64 definition still exists. Signed-off-by: Jan Beulich <jbeulich@novell.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-10-30[ARM] pcm037: map AIPS1 and AIPS2 as nonshared areaSascha Hauer
The internal devices of the MX3 Processor have to be mapped MT_DEVICE_NONSHARED devices, otherwise cache corruptions occur. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2008-10-29x86: remove debug code from arch_add_memory()Gary Hade
Impact: remove incorrect WARN_ON(1) Gets rid of dmesg spam created during physical memory hot-add which will very likely confuse users. The change removes what appears to be debugging code which I assume was unintentionally included in: x86: arch/x86/mm/init_64.c printk fixes commit 10f22dde556d1ed41d55355d1fb8ad495f9810c8 Signed-off-by: Gary Hade <garyhade@us.ibm.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-10-29x86: start annotating early ioremap pointers with __iomemHarvey Harrison
Impact: some new sparse warnings in e820.c etc, but no functional change. As with regular ioremap, iounmap etc, annotate with __iomem. Fixes the following sparse warnings, will produce some new ones elsewhere in arch/x86 that will get worked out over time. arch/x86/mm/ioremap.c:402:9: warning: cast removes address space of expression arch/x86/mm/ioremap.c:406:10: warning: cast adds address space to expression (<asn:2>) arch/x86/mm/ioremap.c:782:19: warning: Using plain integer as NULL pointer Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-10-29x86: two trivial sparse annotationsHarvey Harrison
Impact: fewer sparse warnings, no functional changes arch/x86/kernel/vsmp_64.c:87:14: warning: incorrect type in argument 1 (different address spaces) arch/x86/kernel/vsmp_64.c:87:14: expected void const volatile [noderef] <asn:2>*addr arch/x86/kernel/vsmp_64.c:87:14: got void *[assigned] address arch/x86/kernel/vsmp_64.c:88:22: warning: incorrect type in argument 1 (different address spaces) arch/x86/kernel/vsmp_64.c:88:22: expected void const volatile [noderef] <asn:2>*addr arch/x86/kernel/vsmp_64.c:88:22: got void * arch/x86/kernel/vsmp_64.c:100:23: warning: incorrect type in argument 2 (different address spaces) arch/x86/kernel/vsmp_64.c:100:23: expected void volatile [noderef] <asn:2>*addr arch/x86/kernel/vsmp_64.c:100:23: got void * arch/x86/kernel/vsmp_64.c:101:23: warning: incorrect type in argument 1 (different address spaces) arch/x86/kernel/vsmp_64.c:101:23: expected void const volatile [noderef] <asn:2>*addr arch/x86/kernel/vsmp_64.c:101:23: got void * arch/x86/mm/gup.c:235:6: warning: incorrect type in argument 1 (different base types) arch/x86/mm/gup.c:235:6: expected void const volatile [noderef] <asn:1>*<noident> arch/x86/mm/gup.c:235:6: got unsigned long [unsigned] [assigned] start Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-10-29[ARM] corgi_lcd: fix simultaneous compilation with corgi_blDmitry Baryshkov
corgi_lcd has symbol conflict with corgi_bl driver. Fix it by renaming common symbol in new corgi_lcd driver. Signed-off-by: Dmitry Baryshkov <dbaryshkov@gmail.com> Signed-off-by: Eric Miao <eric.miao@marvell.com>
2008-10-29[ARM] pxa/spitz: fix spi cs on spitzDmitry Baryshkov
On spitz configure SPI CS GPIOs as outputs to unbreak spi chip selection. Signed-off-by: Dmitry Baryshkov <dbaryshkov@gmail.com> Signed-off-by: Eric Miao <eric.miao@marvell.com>
2008-10-28x86: fix init_memory_mapping for [dc000000 - e0000000) - v2Yinghai Lu
Impact: change over-mapping to precise mapping, fix /proc/meminfo output v2: fix less than 1G ram system handling when gart aperture is 0xdc000000 - 0xe0000000 it return 0xc0000000 - 0xe0000000 that is not right. this patch fix that will get exact mapping on 256g sytem with that aperture after patch LBSuse:~ # cat /proc/meminfo MemTotal: 264742432 kB MemFree: 263920628 kB Buffers: 1416 kB Cached: 24468 kB ... DirectMap4k: 5760 kB DirectMap2M: 3205120 kB DirectMap1G: 265289728 kB it is consistent to LBSuse:~ # cat /sys/kernel/debug/kernel_page_tables .. ---[ Low Kernel Mapping ]--- 0xffff880000000000-0xffff880000200000 2M RW GLB x pte 0xffff880000200000-0xffff880040000000 1022M RW PSE GLB x pmd 0xffff880040000000-0xffff8800c0000000 2G RW PSE GLB NX pud 0xffff8800c0000000-0xffff8800d7e00000 382M RW PSE GLB NX pmd 0xffff8800d7e00000-0xffff8800d7fa0000 1664K RW GLB NX pte 0xffff8800d7fa0000-0xffff8800d8000000 384K pte 0xffff8800d8000000-0xffff8800dc000000 64M pmd 0xffff8800dc000000-0xffff8800e0000000 64M RW PSE GLB NX pmd 0xffff8800e0000000-0xffff880100000000 512M pmd 0xffff880100000000-0xffff880800000000 28G RW PSE GLB NX pud 0xffff880800000000-0xffff880824600000 582M RW PSE GLB NX pmd 0xffff880824600000-0xffff8808247f0000 1984K RW GLB NX pte 0xffff8808247f0000-0xffff880824800000 64K RW PCD GLB NX pte 0xffff880824800000-0xffff880840000000 440M RW PSE GLB NX pmd 0xffff880840000000-0xffff884000000000 223G RW PSE GLB NX pud 0xffff884000000000-0xffff884028000000 640M RW PSE GLB NX pmd 0xffff884028000000-0xffff884040000000 384M pmd 0xffff884040000000-0xffff888000000000 255G pud 0xffff888000000000-0xffffc20000000000 58880G pgd Signed-off-by: Yinghai Lu <yinghai@kernel.org> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-10-28Merge branch 'tracing-fixes-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip * 'tracing-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: (31 commits) ftrace: fix current_tracer error return tracing: fix a build error on alpha ftrace: use a real variable for ftrace_nop in x86 tracing/ftrace: make boot tracer select the sched_switch tracer tracepoint: check if the probe has been registered asm-generic: define DIE_OOPS in asm-generic trace: fix printk warning for u64 ftrace: warning in kernel/trace/ftrace.c ftrace: fix build failure ftrace, powerpc, sparc64, x86: remove notrace from arch ftrace file ftrace: remove ftrace hash ftrace: remove mcount set ftrace: remove daemon ftrace: disable dynamic ftrace for all archs that use daemon ftrace: add ftrace warn on to disable ftrace ftrace: only have ftrace_kill atomic ftrace: use probe_kernel ftrace: comment arch ftrace code ftrace: return error on failed modified text. ftrace: dynamic ftrace process only text section ...