summaryrefslogtreecommitdiff
path: root/block
AgeCommit message (Collapse)Author
2007-12-18block: use jiffies conversion functions in scsi_ioctl.cTejun Heo
Use msecs_to_jiffies() and jiffies_to_msecs() in scsi_ioctl(). Sometimes callers use very large values for e.g. vendor specific media clear command and calculation can overflow. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2007-11-27Revert "ll_rw_blk: temporarily enable max_segments tweaking"Jens Axboe
This was a temporary debugging thing for sg chaining testing, revert it now as it has served its purpose. This reverts commit 563063a808de6b2004d5b8a09ddcb6125481f4b2. Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2007-11-27block: Fix memory leak in alloc_disk_node()Jerome Marchand
Fix a memory leak in alloc_disk_node(). Don't forget to free 'dkstats' when the allocation of 'part' failed. Signed-off-by: Jerome Marchand <jmarchan@redhat.com> Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2007-11-27blktrace: Make sure BLKTRACETEARDOWN does the full cleanup.Aneesh Kumar K.V
if blktrace program segfault it will not be able to call BLKTRACETEARDOWN. Now if we run the blktrace again that would result in a failure to create the block/<device> debugfs directory.This will result in blk_remove_root() to be called which will set blk_tree_root to NULL. But the debugfs block dir still exist because it contain subdirectory. Now if we try to fix it using BLKTRACETEARDOWN it won't work because blk_tree_root is NULL. Fix the same. Tested as below root@qemu-image:/home/kvaneesh/blktrace# ./blktrace -d /dev/hdc Segmentation fault root@qemu-image:/home/kvaneesh/blktrace# ./blktrace -d /dev/hdc BLKTRACESETUP: No such file or directory Failed to start trace on /dev/hdc root@qemu-image:/home/kvaneesh/blktrace# ./blktrace -k /dev/hdc root@qemu-image:/home/kvaneesh/blktrace# ./blktrace -d /dev/hdc Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com> Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2007-11-09Add UNPLUG traces to all appropriate placesAlan D. Brunelle
Added blk_unplug interface, allowing all invocations of unplugs to result in a generated blktrace UNPLUG. Signed-off-by: Alan D. Brunelle <Alan.Brunelle@hp.com> Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2007-11-09block: fix requeue handling in blk_queue_invalidate_tags()Jens Axboe
Credit goes to juergen.kadidlo@exasol.com for diagnosing this issue and supplying the initial patch. blk_queue_invalidate_tags() must use the proper requeueing paths instead of open coding the re-add of the request, otherwise we bug out in rq accounting. Just switch to using blk_requeue_request(), that takes care of end-tag handling as well and also adds the blktrace REQUEUE notify event that is also appropriate here. Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2007-11-07cfq_idle_class_timer: add paranoid checks for jiffies overflowOleg Nesterov
In theory, if the queue was idle long enough, cfq_idle_class_timer may have a false (and very long) timeout because jiffies can wrap into the past wrt ->last_end_request. Signed-off-by: Oleg Nesterov <oleg@tv-sign.ru> Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2007-11-07cfq: fix IOPRIO_CLASS_IDLE delaysOleg Nesterov
After the fresh boot: ionice -c3 -p $$ echo cfq >> /sys/block/XXX/queue/scheduler dd if=/dev/XXX of=/dev/null bs=512 count=1 Now dd hangs in D state and the queue is completely stalled for approximately INITIAL_JIFFIES + CFQ_IDLE_GRACE jiffies. This is because cfq_init_queue() forgets to initialize cfq_data->last_end_request. (I guess this patch is not complete, overflow is still possible) Signed-off-by: Oleg Nesterov <oleg@tv-sign.ru> Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2007-11-07cfq: fix IOPRIO_CLASS_IDLE accountingOleg Nesterov
Spotted by Nick <gentuu@gmail.com>, hopefully can explain the second trace in http://bugzilla.kernel.org/show_bug.cgi?id=9180. If ->async_idle_cfqq != NULL cfq_put_async_queues() puts it IOPRIO_BE_NR times in a loop. Fix this. Signed-off-by: Oleg Nesterov <oleg@tv-sign.ru> Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2007-11-03Merge branch 'for-linus' of git://git.kernel.dk/linux-2.6-blockLinus Torvalds
* 'for-linus' of git://git.kernel.dk/linux-2.6-block: [BLOCK] Don't allow empty barriers to be passed down to queues that don't grok them dm: bounce_pfn limit added Deadline iosched: Fix batching fairness Deadline iosched: Reset batch for ordered requests Deadline iosched: Factor out finding latter reques
2007-11-02[BLOCK] Don't allow empty barriers to be passed down to queues that don't ↵Jens Axboe
grok them Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2007-11-02Deadline iosched: Fix batching fairnessAaron Carroll
After switching data directions, deadline always starts the next batch from the lowest-sector request. This gives excessive deadline expiries and large latency and throughput disparity between high- and low-sector requests; an order of magnitude in some tests. This patch changes the batching behaviour so new batches start from the request whose expiry is earliest. Signed-off-by: Aaron Carroll <aaronc@gelato.unsw.edu.au> Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2007-11-02Deadline iosched: Reset batch for ordered requestsAaron Carroll
The deadline I/O scheduler does not reset the batch count when starting a new batch at a higher-sectored request. This means the second and subsequent batch in the same data direction will never exceed a single request in size whenever higher-sectored requests are pending. This patch gives new batches in the same data direction as old ones their full quota of requests by resetting the batch count. Signed-off-by: Aaron Carroll <aaronc@gelato.unsw.edu.au> Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2007-11-02Deadline iosched: Factor out finding latter requesAaron Carroll
Factor finding the next request in sector-sorted order into a function deadline_latter_request. Signed-off-by: Aaron Carroll <aaronc@gelato.unsw.edu.au> Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2007-11-02[SG] Get rid of __sg_mark_end()Jens Axboe
sg_mark_end() overwrites the page_link information, but all users want __sg_mark_end() behaviour where we just set the end bit. That is the most natural way to use the sg list, since you'll fill it in and then mark the end point. So change sg_mark_end() to only set the termination bit. Add a sg_magic debug check as well, and clear a chain pointer if it is set. Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2007-10-29compat_ioctl: fix block device compat ioctl regressionPhilip Langdale
The conversion of handlers to compat_blkdev_ioctl accidentally disabled handling of most ioctl numbers on block devices because of a typo. Fix the one line to enable it all again. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Jens Axboe <axboe@carl.home.kernel.dk>
2007-10-29[BLOCK] Fix bad sharing of tag busy list on queues with shared tag mapsJens Axboe
For the locking to work, only the tag map and tag bit map may be shared (incidentally, I was just explaining this to Nick yesterday, but I apparently didn't review the code well enough myself). But we also share the busy list! The busy_list must be queue private, or we need a block_queue_tag covering lock as well. So we have to move the busy_list to the queue. This'll work fine, and it'll actually also fix a problem with blk_queue_invalidate_tags() which will invalidate tags across all shared queues. This is a bit confusing, the low level driver should call it for each queue seperately since otherwise you cannot kill tags on just a single queue for eg a hard drive that stops responding. Since the function has no callers currently, it's not an issue. Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2007-10-29block: use lock bitops for the tag map.Nick Piggin
The block queue tag map can use lock bitops. Signed-off-by: Nick Piggin <npiggin@suse.de> Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2007-10-29cfq_get_queue: fix possible NULL pointer accessOleg Nesterov
cfq_get_queue()->cfq_find_alloc_queue() can fail, check the returned value. Signed-off-by: Oleg Nesterov <oleg@tv-sign.ru> Note that this isn't a bug at the moment, since the regular IO path does not call this path without __GFP_WAIT set. However, it could be a future bug, so I've applied it. Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2007-10-29blk_sync_queue() should cancel request_queue->unplug_workOleg Nesterov
blk_sync_queue() cancels the timer, but forgets to cancel the work. Signed-off-by: Oleg Nesterov <oleg@tv-sign.ru> Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2007-10-29cfq_exit_queue() should cancel cfq_data->unplug_workOleg Nesterov
Spotted by Nick <gentuu@gmail.com>, perhaps explains the first trace in http://bugzilla.kernel.org/show_bug.cgi?id=9180. cfq_exit_queue() should cancel cfqd->unplug_work before freeing cfqd. blk_sync_queue() seems unneeded, removed. Q: why cfq_exit_queue() calls cfq_shutdown_timer_wq() twice? Signed-off-by: Oleg Nesterov <oleg@tv-sign.ru> Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2007-10-29block layer: remove a unused argument of drive_stat_acct()Jerome Marchand
The nr_sector argument of drive_stat_acct() is not used anymore since the read and write sectors statistics are now updated in end_that_request_first(). This patch removes the useless argument. Signed-off-by: Jerome Marchand <jmarchan@redhat.com> Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2007-10-24SG: Change sg_set_page() to take length and offset argumentJens Axboe
Most drivers need to set length and offset as well, so may as well fold those three lines into one. Add sg_assign_page() for those two locations that only needed to set the page, where the offset/length is set outside of the function context. Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2007-10-23[BLOCK] blk_rq_map_sg: force clear termination bitJens Axboe
Since blk_rq_map_sg() sets the termination bit at the end of the sg table, we could see it prematurely on the next mapping unless we force drivers to do a full sg_init_table() prior to each mapping. So force clear the termination bit to avoid having to put that clear in the driver for every mapping. Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2007-10-23[BLOCK] Don't clear sg_dma_len/addr() in blk_rq_map_sg()Jens Axboe
It's not a proper lvalue on all archs. Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2007-10-22[SG] Update block layer to use sg helpersJens Axboe
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2007-10-20fix typo "insted" -> "instead"Uwe Kleine-König
Signed-off-by: Uwe Kleine-König <ukleinek@informatik.uni-freiburg.de> Signed-off-by: Adrian Bunk <bunk@kernel.org>
2007-10-19Use helpers to obtain task pid in printksPavel Emelyanov
The task_struct->pid member is going to be deprecated, so start using the helpers (task_pid_nr/task_pid_vnr/task_pid_nr_ns) in the kernel. The first thing to start with is the pid, printed to dmesg - in this case we may safely use task_pid_nr(). Besides, printks produce more (much more) than a half of all the explicit pid usage. [akpm@linux-foundation.org: git-drm went and changed lots of stuff] Signed-off-by: Pavel Emelyanov <xemul@openvz.org> Cc: Dave Airlie <airlied@linux.ie> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-10-19kernel-api docbook: fix content problemsRandy Dunlap
Fix kernel-api docbook contents problems. docproc: linux-2.6.23-git13/include/asm-x86/unaligned_32.h: No such file or directory Warning(linux-2.6.23-git13//include/linux/list.h:482): bad line: of list entry Warning(linux-2.6.23-git13//mm/filemap.c:864): No description found for parameter 'ra' Warning(linux-2.6.23-git13//block/ll_rw_blk.c:3760): No description found for parameter 'req' Warning(linux-2.6.23-git13//include/linux/input.h:1077): No description found for parameter 'private' Warning(linux-2.6.23-git13//include/linux/input.h:1077): No description found for parameter 'cdev' Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com> Cc: Jens Axboe <jens.axboe@oracle.com> Cc: WU Fengguang <wfg@mail.ustc.edu.cn> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-10-17[BLOCK] blk_rq_map_sg() next_sg fixupJens Axboe
Don't ever use sg_next() on the last entry, it may not be valid! Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2007-10-17Merge branch 'for-linus' of git://git.kernel.dk/data/git/linux-2.6-blockLinus Torvalds
* 'for-linus' of git://git.kernel.dk/data/git/linux-2.6-block: [SCSI] Remove full sg table memset() [SCSI] ide-scsi: remove usage of sg_last() Fix loop terminating conditions in fill_sg(). [BLOCK] Clear sg entry before filling in blk_rq_map_sg() IA64: iommu uses sg_next with an invalid sg element cciss: disable DMA refetch on Smart Array P600 swiotlb: fix map_sg failure handling SPARC64: fix iommu sg chaining [SCSI] ide-scsi: use scsi_sg_count() instead of ->use_sg
2007-10-17mm: bdi init hooksPeter Zijlstra
provide BDI constructor/destructor hooks [akpm@linux-foundation.org: compile fix] Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-10-17[BLOCK] Clear sg entry before filling in blk_rq_map_sg()Jens Axboe
The memset() of the sg entry was originally removed, because it could overwrite a chain pointer. But it's quite OK to memset() it when we know it's a valid entry, since it can't contain a chain pointer. Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2007-10-16Merge branch 'for-linus' of git://git.kernel.dk/data/git/linux-2.6-blockLinus Torvalds
* 'for-linus' of git://git.kernel.dk/data/git/linux-2.6-block: (63 commits) Fix memory leak in dm-crypt SPARC64: sg chaining support SPARC: sg chaining support PPC: sg chaining support PS3: sg chaining support IA64: sg chaining support x86-64: enable sg chaining x86-64: update pci-gart iommu to sg helpers x86-64: update nommu to sg helpers x86-64: update calgary iommu to sg helpers swiotlb: sg chaining support i386: enable sg chaining i386 dma_map_sg: convert to using sg helpers mmc: need to zero sglist on init Panic in blk_rq_map_sg() from CCISS driver remove sglist_len remove blk_queue_max_phys_segments in libata revert sg segment size ifdefs Fixup u14-34f ENABLE_SG_CHAINING qla1280: enable use_sg_chaining option ...
2007-10-16readahead: remove the limit max_sectors_kb imposed on max_readahead_kbFengguang Wu
Remove the size limit max_sectors_kb imposed on max_readahead_kb. The size restriction is unreasonable. Especially when max_sectors_kb cannot grow larger than max_hw_sectors_kb, which can be rather small for some disk drives. Cc: Jens Axboe <jens.axboe@oracle.com> Signed-off-by: Fengguang Wu <wfg@mail.ustc.edu.cn> Acked-by: Jens Axboe <jens.axboe@oracle.com> Cc: Rusty Russell <rusty@rustcorp.com.au> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-10-16Convert cpu_sibling_map to be a per cpu variableMike Travis
Convert cpu_sibling_map from a static array sized by NR_CPUS to a per_cpu variable. This saves sizeof(cpumask_t) * NR unused cpus. Access is mostly from startup and CPU HOTPLUG functions. Signed-off-by: Mike Travis <travis@sgi.com> Cc: Andi Kleen <ak@suse.de> Cc: Christoph Lameter <clameter@sgi.com> Cc: "Siddha, Suresh B" <suresh.b.siddha@intel.com> Cc: "David S. Miller" <davem@davemloft.net> Cc: Paul Mackerras <paulus@samba.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: "Luck, Tony" <tony.luck@intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-10-16Merge branch 'sglist-arch' into for-linusJens Axboe
2007-10-16Merge branch 'barrier' into for-linusJens Axboe
2007-10-16ll_rw_blk: temporarily enable max_segments tweakingJens Axboe
Expose this setting for now, so that users can play with enabling large commands without defaulting it to on globally. This is a debug patch, it will be dropped for the final versions. Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2007-10-16block: convert to using sg helpersJens Axboe
Convert the main rq mapper (blk_rq_map_sg()) to the sg helper setup. Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2007-10-16block: convert blkdev_issue_flush() to use empty barriersJens Axboe
Then we can get rid of ->issue_flush_fn() and all the driver private implementations of that. Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2007-10-16block: Initial support for data-less (or empty) barrier supportJens Axboe
This implements functionality to pass down or insert a barrier in a queue, without having data attached to it. The ->prepare_flush_fn() infrastructure from data barriers are reused to provide this functionality. Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2007-10-16block: factor our bio_check_eod()Jens Axboe
End of device check is done twice in __generic_make_request() and it's fully inlined each time. Factor out bio_check_eod(). Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2007-10-16block: add end_queued_request() and end_dequeued_request() helpersJens Axboe
We can use this helper in the elevator core for BLKPREP_KILL, and it'll also be useful for the empty barrier patch. Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2007-10-16block: ll_rw_blk.c: cosmeticsJens Axboe
Fix ?: construct, a typo, whitespace, and similar. Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2007-10-16bsg: mark struct file_operations constArjan van de Ven
struct file_operations is generally const (to avoid false sharing and get compile time errors on accidental writing to this shared structure); bsg recently added one of these without the const keyword. Patch below marks it const.... Signed-off-by: Arjan van de Ven <arjan@linux.intel.com> Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2007-10-12Only enable BLOCK_COMPAT if COMPAT is neededLinus Torvalds
IOW, it needs to depend on both CONFIG_BLOCK and CONFIG_COMPAT. Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-10-12Merge master.kernel.org:/pub/scm/linux/kernel/git/gregkh/driver-2.6Linus Torvalds
* master.kernel.org:/pub/scm/linux/kernel/git/gregkh/driver-2.6: (75 commits) PM: merge device power-management source files sysfs: add copyrights kobject: update the copyrights kset: add some kerneldoc to help describe what these strange things are Driver core: rename ktype_edd and ktype_efivar Driver core: rename ktype_driver Driver core: rename ktype_device Driver core: rename ktype_class driver core: remove subsystem_init() sysfs: move sysfs file poll implementation to sysfs_open_dirent sysfs: implement sysfs_open_dirent sysfs: move sysfs_dirent->s_children into sysfs_dirent->s_dir sysfs: make sysfs_root a regular directory dirent sysfs: open code sysfs_attach_dentry() sysfs: make s_elem an anonymous union sysfs: make bin attr open get active reference of parent too sysfs: kill unnecessary NULL pointer check in sysfs_release() sysfs: kill unnecessary sysfs_get() in open paths sysfs: reposition sysfs_dirent->s_mode. sysfs: kill sysfs_update_file() ...
2007-10-12cdev: remove unneeded setting of cdev namesGreg Kroah-Hartman
struct cdev does not need the kobject name to be set, as it is never used. This patch fixes up the few places it is set. Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> Acked-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-10-12kobjects: fix up improper use of the kobject name fieldGreg Kroah-Hartman
A number of different drivers incorrect access the kobject name field directly. This is not correct as the name might not be in the array. Use the proper accessor function instead.