summaryrefslogtreecommitdiff
path: root/drivers/gpu
AgeCommit message (Collapse)Author
2010-08-13Merge git://git.infradead.org/~dwmw2/ideapad-2.6Linus Torvalds
* git://git.infradead.org/~dwmw2/ideapad-2.6: Call acpi_video_register() in intel_opregion_init() failure path ideapad: Only allow camera state to be set to 0 or 1 ideapad: Stop using global variables Add Lenovo ideapad driver
2010-08-13Call acpi_video_register() in intel_opregion_init() failure pathDavid Woodhouse
If i915 opregion is present, the acpi_video driver doesn't register itself immediately; it defers that until the i915 opregion code is done. But if that *fails*, the acpi_video driver was never getting registered. And thus I have no backlight support on my Lenovo IdeaPad S10-3. Call acpi_video_register() on the failure path, and it works again. Signed-off-by: David Woodhouse <David.Woodhouse@intel.com> Acked-by: Jesse Barnes <jbarnes@virtuousgeek.org> Acked-by: Matthew Garrett <mjg@redhat.com>
2010-08-12Merge branch 'drm-core-next' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/airlied/drm-2.6 * 'drm-core-next' of git://git.kernel.org/pub/scm/linux/kernel/git/airlied/drm-2.6: (55 commits) io-mapping: move asm include inside the config option vgaarb: drop vga.h include drm/radeon: Add probing of clocks from device-tree drm/radeon: drop old and broken mesa warning drm/radeon: Fix pci_map_page() error checking drm: Remove count_lock for calling lastclose() after 58474713 (v2) drm/radeon/kms: allow FG_ALPHA_VALUE on r5xx drm/radeon/kms: another r6xx/r7xx CS checker fix DRM: Replace kmalloc/memset combos with kzalloc drm: expand gamma_set drm/edid: Split mode lists out to their own header for readability drm/edid: Rewrite mode parse to use the generic detailed block walk drm/edid: Add detailed block walk for VTB extensions drm/edid: Add detailed block walk for CEA extensions drm: Remove unused fields from drm_display_info drm: Use ENOENT consistently for the error return for an unmatched handle. drm/radeon/kms: mark 3D power states as performance drm: Only set DPMS once on the CRTC not after every encoder. drm/radeon/kms: add additional quirk for Acer rv620 laptop drm: Propagate error code from fb_create() ... Fix up trivial conflicts in drivers/gpu/drm/drm_edid.c
2010-08-12drm/radeon: Add probing of clocks from device-treeBenjamin Herrenschmidt
When we find no ROM we understand and a device-tree is present, see if we can retreive clock info from there. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Dave Airlie <airlied@redhat.com>
2010-08-12drm/radeon: drop old and broken mesa warningDave Airlie
This never really got fixed in mesa, and the kernel deals with the problem just fine, so don't got reporting things that confuse people. Signed-off-by: Dave Airlie <airlied@redhat.com>
2010-08-12drm/radeon: Fix pci_map_page() error checkingBenjamin Herrenschmidt
0 is a valid DMA address from pci_map_page(), use pci_dma_mapping_error() instead to check for errors [airlied: fix warning + two other places with errors.] Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Dave Airlie <airlied@redhat.com>
2010-08-12drm: Remove count_lock for calling lastclose() after 58474713 (v2)Chris Wilson
When removing of the BKL the locking around lastclose() was rearranged and resulted in the holding of the open_count spinlock over the call into drm_lastclose(). The drivers were not ready for this path to be atomic - it may indeed involve long waits to release old objects and cleanup the GPU - and so we ended up scheduling whilst atomic. [ 54.625598] BUG: scheduling while atomic: X/3546/0x00000002 [ 54.625600] Modules linked in: sco bridge stp llc input_polldev rfcomm bnep l2cap crc16 sch_sfq ipv6 md_mod acpi_cpufreq mperf cryptd aes_x86_64 aes_generic xts gf128mul dm_crypt dm_mod btusb bluetooth usbhid hid zaurus cdc_ether usbnet mii cdc_wdm cdc_acm uvcvideo videodev v4l1_compat v4l2_compat_ioctl32 snd_hda_codec_conexant arc4 pcmcia ecb snd_hda_intel joydev sdhci_pci sdhci snd_hda_codec tpm_tis firewire_ohci mmc_core e1000e uhci_hcd thinkpad_acpi nvram yenta_socket pcmcia_rsrc pcmcia_core tpm wmi sr_mod firewire_core iwlagn ehci_hcd snd_hwdep snd_pcm usbcore tpm_bios thermal led_class snd_timer iwlcore snd soundcore ac snd_page_alloc pcspkr psmouse serio_raw battery sg mac80211 evdev cfg80211 i2c_i801 iTCO_wdt iTCO_vendor_support cdrom processor crc_itu_t rfkill xfs exportfs sd_mod crc_t10dif ahci libahci libata scsi_mod [last unloaded: scsi_wait_scan] [ 54.625663] Pid: 3546, comm: X Not tainted 2.6.35-04771-g1787985 #301 [ 54.625665] Call Trace: [ 54.625671] [<ffffffff8102d599>] __schedule_bug+0x57/0x5c [ 54.625675] [<ffffffff81384141>] schedule+0xe5/0x832 [ 54.625679] [<ffffffff81163e77>] ? put_dec+0x20/0x3c [ 54.625682] [<ffffffff81384dd4>] schedule_timeout+0x275/0x29f [ 54.625686] [<ffffffff810455e1>] ? process_timeout+0x0/0xb [ 54.625688] [<ffffffff81384e17>] schedule_timeout_uninterruptible+0x19/0x1b [ 54.625691] [<ffffffff81045893>] msleep+0x16/0x1d [ 54.625695] [<ffffffff812a2e53>] i9xx_crtc_dpms+0x273/0x2ae [ 54.625698] [<ffffffff812a18be>] intel_crtc_dpms+0x28/0xe7 [ 54.625702] [<ffffffff811ec0fa>] drm_helper_disable_unused_functions+0xf0/0x118 [ 54.625705] [<ffffffff811ecde3>] drm_crtc_helper_set_config+0x644/0x7c8 [ 54.625708] [<ffffffff811f12dd>] ? drm_copy_field+0x40/0x50 [ 54.625711] [<ffffffff811ebca2>] drm_fb_helper_force_kernel_mode+0x3e/0x85 [ 54.625713] [<ffffffff811ebcf2>] drm_fb_helper_restore+0x9/0x24 [ 54.625717] [<ffffffff81290a41>] i915_driver_lastclose+0x2b/0x5c [ 54.625720] [<ffffffff811f14a7>] drm_lastclose+0x44/0x2ad [ 54.625722] [<ffffffff811f1ed2>] drm_release+0x5c6/0x609 [ 54.625726] [<ffffffff810d1275>] fput+0x109/0x1c7 [ 54.625728] [<ffffffff810ce5e4>] filp_close+0x61/0x6b [ 54.625731] [<ffffffff810ce680>] sys_close+0x92/0xd4 [ 54.625734] [<ffffffff81002a2b>] system_call_fastpath+0x16/0x1b v2: The spinlock is actually superfluous as access to open_count is entirely serialised by drm_global_mutex and so can be dropped. The count_lock spinlock instead appears to be used to protect access to dev->buf_alloc and dev->buf_use. Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by: Dave Airlie <airlied@redhat.com>
2010-08-12drm/radeon/kms: allow FG_ALPHA_VALUE on r5xxMarek Olšák
This is a CS checker fix. I need this for FP16 alpha-test. Signed-off-by: Marek Olšák <maraeo@gmail.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2010-08-12drm/radeon/kms: another r6xx/r7xx CS checker fixAlex Deucher
add default case for buffer formats Signed-off-by: Alex Deucher <alexdeucher@gmail.com> Cc: Andre Maasikas <amaasikas@gmail.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2010-08-12DRM: Replace kmalloc/memset combos with kzallocDavidlohr Bueso
Currently most, if not all, memory allocation in drm_bufs.c is followed by initializing the memory with 0. Replace the use of kmalloc+memset with kzalloc. Signed-off-by: Davidlohr Bueso <dave@gnu.org> Signed-off-by: Dave Airlie <airlied@redhat.com>
2010-08-10vt/console: try harder to print output when panicingJesse Barnes
Jesse's initial patch commit said: "At panic time (i.e. when oops_in_progress is set) we should try a bit harder to update the screen and make sure output gets to the VT, since some drivers are capable of flipping back to it. So make sure we try to unblank and update the display if called from a panic context." I've enhanced this to add a flag to the vc that console layer can set to indicate they want this behaviour to occur. This also adds support to fbcon for that flag and adds an fb flag for drivers to indicate they want to use the support. It enables this for KMS drivers. Signed-off-by: Dave Airlie <airlied@redhat.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org> Acked-by: James Simmons <jsimmons@infradead.org> Cc: Alan Cox <alan@lxorguk.ukuu.org.uk> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-08-10drm: expand gamma_setJames Simmons
Expand the crtc_gamma_set function to accept a starting offset. The reason for this is to eventually use this function for setcolreg from drm_fb_helper.c. The fbdev colormap function can start at any offset in the color map. Signed-by: James Simmons <jsimmons@infradead.org> Signed-off-by: Dave Airlie <airlied@redhat.com>
2010-08-10drm/edid: Split mode lists out to their own header for readabilityAdam Jackson
... of the code, not of the mode lists. Signed-off-by: Adam Jackson <ajax@redhat.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2010-08-10drm/edid: Rewrite mode parse to use the generic detailed block walkAdam Jackson
This brings us in line with the EDID spec recommendation for mode priority sorting. We still don't extract all the modes we could from VTB, but VTB is so rare in the wild that I'm not really concerned. Signed-off-by: Adam Jackson <ajax@redhat.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2010-08-10drm/edid: Add detailed block walk for VTB extensionsAdam Jackson
Signed-off-by: Adam Jackson <ajax@redhat.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2010-08-10drm/edid: Add detailed block walk for CEA extensionsAdam Jackson
Signed-off-by: Adam Jackson <ajax@redhat.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2010-08-10drm: Remove unused fields from drm_display_infoAdam Jackson
Signed-off-by: Adam Jackson <ajax@redhat.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2010-08-10drm: Use ENOENT consistently for the error return for an unmatched handle.Chris Wilson
This is consistent with trying to access a filename that not exist within a directory which is a good analogy here. The main reason for the change is that it is easy to confuse the error code of EBADF as an performing an ioctl on an invalid file descriptor (rather than an unknown object). Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by: Dave Airlie <airlied@redhat.com>
2010-08-10drm/radeon/kms: mark 3D power states as performanceAlex Deucher
Fixes lack of power saving with multiple heads on some desktop cards. Fixes: https://bugzilla.kernel.org/show_bug.cgi?id=16474 Signed-off-by: Alex Deucher <alexdeucher@gmail.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2010-08-10drm: Only set DPMS once on the CRTC not after every encoder.Chris Wilson
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by: Dave Airlie <airlied@redhat.com>
2010-08-10drm/radeon/kms: add additional quirk for Acer rv620 laptopAlex Deucher
HPD pins are reversed Fixes: https://bugs.freedesktop.org/show_bug.cgi?id=29387 Signed-off-by: Alex Deucher <alexdeucher@gmail.com> Cc: stable@kernel.org Signed-off-by: Dave Airlie <airlied@redhat.com>
2010-08-10drm: Propagate error code from fb_create()Chris Wilson
Change the interface to expect a PTR_ERR specifing the real error code as opposed to assuming a NULL return => -EINVAL. Just once the user may not be at fault! Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by: Dave Airlie <airlied@redhat.com>
2010-08-10radeon: handle errors in radeon_hwmon_init()Dan Carpenter
Smatch complained that the ERR_PTR from hwmon_device_register() wasn't handled.  I added some error handling in radeon_hwmon_init() to silence the warning. Unfortunately errors from radeon_pm_init() aren't handled so this doesn't really make a difference beyond silencing the warning. Also I changed DRM_ERROR() to dev_err() which is the new preferred method. Signed-off-by: Dan Carpenter <error27@gmail.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2010-08-10drm/radeon/kms: add support for router objectsAlex Deucher
router objects are found on systems that use a mux to control ddc line to connector routing or to control the actual clock and data routing from the chip to the connectors. This patch implements ddc line routing. Signed-off-by: Alex Deucher <alexdeucher@gmail.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2010-08-10drm/radeon/kms: rework combios i2c handlingAlex Deucher
Handle asic specific table to hw mappings in combios_setup_i2c_bus() directly. This allows us to remove most of the combios quirks and clean up the i2c bus setup. Signed-off-by: Alex Deucher <alexdeucher@gmail.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2010-08-10drm/radeon/kms: unify i2c handlingAlex Deucher
Previously we added i2c buses as needed when enumerating connectors power management, etc. This only exposed the actual buses used and could have lead to the same buse getting created more than once if one buses was used for more than one purpose. This patch sets up all i2c buses on the card in one place and users of the buses just point back to the one instance. Signed-off-by: Alex Deucher <alexdeucher@gmail.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2010-08-10drm/radeon/kms: r600 CS parser fixesAlex Deucher
- buffer offsets in the base regs are 256b aligned so shift properly when comparing, fixed by Andre Maasikas - mipmap size was calculated wrong when nlevel=0 - texture bo offsets were used after the bo base address was added - vertex resource size register is size - 1, not size Signed-off-by: Alex Deucher <alexdeucher@gmail.com> Cc: Andre Maasikas <amaasikas@gmail.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2010-08-10drm/radeon: add a way to revoke hyper-z accessMarek Olšák
Signed-off-by: Marek Olšák <maraeo@gmail.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2010-08-10drm: Fix support for PCI domainsBenjamin Herrenschmidt
(For some reason I thought that went in ages ago ...) This fixes support for PCI domains in what should hopefully be a backward compatible way along with a change to libdrm. When the interface version is set to 1.4, we assume userspace understands domains and the world is at peace. We thus pass proper domain numbers instead of 0 to userspace. The newer libdrm will then try 1.4 first, and fallback to 1.1, along with ignoring domains in the later case (well, except on alpha of course) Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Dave Airlie <airlied@redhat.com>
2010-08-10Merge remote branch 'nouveau/for-airlied' of /ssd/git/drm-nouveau-next into ↵Dave Airlie
drm-core-next * 'nouveau/for-airlied' of /ssd/git/drm-nouveau-next: (27 commits) drm/nvc0: fix typo in PRAMIN flush drm/nouveau: Fix DCB TMDS config parsing. drm/nv30: Fix PFB init for nv31. drm/nv04: Fix up SGRAM density detection. drm/i2c/ch7006: Don't use POWER_LEVEL_FULL_POWER_OFF on early chip versions. drm/nouveau: Init dcb->or on cards that have no usable DCB table. drm/nouveau: reduce severity of some "error" messages drm/nvc0: backup bar3 channel on suspend drm/nouveau: implement init table opcodex 0x5e and 0x9a drm/nouveau: implement init table op 0x57, INIT_LTIME drm/nvc0: implement crtc pll setting drm/nvc0: fix evo dma object so we display something drm/nvc0: rudimentary instmem support drm/nvc0: implement memory detection drm/nvc0: allow INIT_GPIO drm/nvc0: starting point for GF100 support, everything stubbed drm/nv30: Workaround dual TMDS brain damage. drm/nouveau: No need to set slave TV encoder configs explicitly. drm/nv17-nv4x: Attempt to init some external TMDS transmitters. drm/nv10: Fix up switching of NV10TCL_DMA_VTXBUF. ...
2010-08-10drm/radeon/kms: add missing copy from userDr. David Alan Gilbert
This hasn't mattered up until the ioctl started using the value, and it fell apart. fixes fd.o 29340, Ubuntu LP 606081 [airlied: cleaned up whitespace and don't need an error before pushing] Signed-off-by: Dr. David Alan Gilbert <linux@treblig.org> Cc: stable@kernel.org Signed-off-by: Dave Airlie <airlied@redhat.com>
2010-08-09drm: fix fallouts from slow-work -> wq conversionTejun Heo
Commit 991ea75c (drm: use workqueue instead of slow-work), which made drm to use wq instead of slow-work, didn't account for the return value difference between delayed_slow_work_enqueue() and queue_delayed_work(). The former returns 0 on success and -errno on failures while the latter never fails and only uses the return value to indicate whether the work was already pending or not. This misconversion triggered spurious error messages. Remove the now unnecessary return value check and error message. Markus: caught another incorrect conversion in drm_kms_helper_poll_enable() Signed-off-by: Tejun Heo <tj@kernel.org> Reported-by: Markus Trippelsdorf <markus@trippelsdorf.de> Tested-by: Markus Trippelsdorf <markus@trippelsdorf.de> Cc: David Airlie <airlied@linux.ie> Cc: dri-devel@lists.freedesktop.org
2010-08-09drm/nvc0: fix typo in PRAMIN flushBen Skeggs
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2010-08-09drm/nouveau: Fix DCB TMDS config parsing.Francisco Jerez
Thinko caused by 43bda05428a3d2021f3c12220073e0251c65df8b. Signed-off-by: Francisco Jerez <currojerez@riseup.net>
2010-08-09drm/nv30: Fix PFB init for nv31.Francisco Jerez
Fixes a regression introduced by 58bbb63720c8997e0136fe1884101e7ca40d68fd (fdo bug 29324). Reported-by: Johannes Obermayr <johannesobermayr@gmx.de> Signed-off-by: Francisco Jerez <currojerez@riseup.net> Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2010-08-09drm/nv04: Fix up SGRAM density detection.Francisco Jerez
Signed-off-by: Francisco Jerez <currojerez@riseup.net> Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2010-08-09drm/i2c/ch7006: Don't use POWER_LEVEL_FULL_POWER_OFF on early chip versions.Francisco Jerez
Signed-off-by: Francisco Jerez <currojerez@riseup.net> Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2010-08-09drm/nouveau: Init dcb->or on cards that have no usable DCB table.Francisco Jerez
We need a valid OR value because there're a few nv17 cards with DCB v1.4. Signed-off-by: Francisco Jerez <currojerez@riseup.net> Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2010-08-07Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/wqLinus Torvalds
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/wq: (55 commits) workqueue: mark init_workqueues() as early_initcall() workqueue: explain for_each_*cwq_cpu() iterators fscache: fix build on !CONFIG_SYSCTL slow-work: kill it gfs2: use workqueue instead of slow-work drm: use workqueue instead of slow-work cifs: use workqueue instead of slow-work fscache: drop references to slow-work fscache: convert operation to use workqueue instead of slow-work fscache: convert object to use workqueue instead of slow-work workqueue: fix how cpu number is stored in work->data workqueue: fix mayday_mask handling on UP workqueue: fix build problem on !CONFIG_SMP workqueue: fix locking in retry path of maybe_create_worker() async: use workqueue for worker pool workqueue: remove WQ_SINGLE_CPU and use WQ_UNBOUND instead workqueue: implement unbound workqueue workqueue: prepare for WQ_UNBOUND implementation libata: take advantage of cmwq and remove concurrency limitations workqueue: fix worker management invocation without pending works ... Fixed up conflicts in fs/cifs/* as per Tejun. Other trivial conflicts in include/linux/workqueue.h, kernel/trace/Kconfig and kernel/workqueue.c
2010-08-05Merge branch 'drm-core-next' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/airlied/drm-2.6 * 'drm-core-next' of git://git.kernel.org/pub/scm/linux/kernel/git/airlied/drm-2.6: (204 commits) agp: intel-agp: do not use PCI resources before pci_enable_device() agp: efficeon-agp: do not use PCI resources before pci_enable_device() drm: kill BKL from common code drm/kms: Simplify setup of the initial I2C encoder config. drm,io-mapping: Specify slot to use for atomic mappings drm/radeon/kms: only expose underscan on avivo chips drm/radeon: add new pci ids drm: Cleanup after failing to create master->unique and dev->name drm/radeon: tone down overchatty acpi debug messages. drm/radeon/kms: enable underscan option for digital connectors drm/radeon/kms: fix calculation of h/v scaling factors drm/radeon/kms/igp: sideport is AMD only drm/radeon/kms: handle the case of no active displays properly in the bandwidth code drm: move ttm global code to core drm drm/i915: Clear the Ironlake dithering flags when the pipe doesn't want it. drm/radeon/kms: make sure HPD is set to NONE on analog-only connectors drm/radeon/kms: make sure rio_mem is valid before unmapping it drm/agp/i915: trim stolen space to 32M drm/i915: Unset cursor if out-of-bounds upon mode change (v4) drm/i915: Unreference object not handle on creation ...
2010-08-05Merge branch 'kms-merge' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/jwessel/linux-2.6-kgdb * 'kms-merge' of git://git.kernel.org/pub/scm/linux/kernel/git/jwessel/linux-2.6-kgdb: kgdb,docs: Update the kgdb docs to include kms drm_fb_helper: Preserve capability to use atomic kms i915: when kgdb is active display compression should be off drm/i915: use new fb debug hooks drm: add KGDB/KDB support fb: add hooks to handle KDB enter/exit kgdboc: Add call backs to allow kernel mode switching vt,console,kdb: automatically set kdb LINES variable vt,console,kdb: implement atomic console enter/leave functions
2010-08-06drm/nouveau: reduce severity of some "error" messagesBen Skeggs
There's some known configurations where the lack of these tables/scripts is perfectly normal, reduce visibilty of complaint messages to debug. Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2010-08-06drm/nvc0: backup bar3 channel on suspendBen Skeggs
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2010-08-06drm/nouveau: implement init table opcodex 0x5e and 0x9aMarcin Kościelnicki
Signed-off-by: Ben Skeggs <bskeggs@redhat.com> Signed-off-by: Marcin Kościelnicki <koriakin@0x04.net>
2010-08-06drm/nouveau: implement init table op 0x57, INIT_LTIMEMarcin Kościelnicki
Signed-off-by: Ben Skeggs <bskeggs@redhat.com> Signed-off-by: Marcin Kościelnicki <koriakin@0x04.net>
2010-08-06drm/nvc0: implement crtc pll settingBen Skeggs
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2010-08-06drm/nvc0: fix evo dma object so we display somethingBen Skeggs
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2010-08-06drm/nvc0: rudimentary instmem supportBen Skeggs
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2010-08-06drm/nvc0: implement memory detectionBen Skeggs
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2010-08-06drm/nvc0: allow INIT_GPIOBen Skeggs
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
generated by cgit v1.2.3 (git 2.39.1) at 2024-07-31 07:34:41 +0000