summaryrefslogtreecommitdiff
path: root/drivers/hid
AgeCommit message (Collapse)Author
2012-01-13module_param: make bool parameters really bool (drivers & misc)Rusty Russell
module_param(bool) used to counter-intuitively take an int. In fddd5201 (mid-2009) we allowed bool or int/unsigned int using a messy trick. It's time to remove the int/unsigned int option. For this version it'll simply give a warning, but it'll break next kernel version. Acked-by: Mauro Carvalho Chehab <mchehab@redhat.com> Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
2012-01-11Merge git://git.infradead.org/battery-2.6Linus Torvalds
* git://git.infradead.org/battery-2.6: (68 commits) power_supply: Mark da9052 driver as broken power_supply: Drop usage of nowarn variant of sysfs_create_link() s3c_adc_battery: Average over more than one adc sample power_supply: Add DA9052 battery driver isp1704_charger: Fix missing check jz4740-battery: Fix signedness bug power_supply: Assume mains power by default sbs-battery: Fix devicetree match table ARM: rx51: Add bq27200 i2c board info sbs-battery: Change power supply name devicetree-bindings: Propagate bq20z75->sbs rename to dt bindings devicetree-bindings: Add vendor entry for Smart Battery Systems sbs-battery: Rename internals to new name bq20z75: Rename to sbs-battery wm97xx_battery: Use DEFINE_MUTEX() for work_lock max8997_charger: Remove duplicate module.h lp8727_charger: Some minor fixes for the header lp8727_charger: Add header file power_supply: Convert drivers/power/* to use module_platform_driver() power_supply: Add "unknown" in power supply type ...
2012-01-10Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/jikos/hid * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/hid: (68 commits) hid-input/battery: add FEATURE quirk hid-input/battery: remove battery_val hid-input/battery: power-supply type really *is* a battery hid-input/battery: make the battery setup common for INPUTs and FEATUREs hid-input/battery: deal with both FEATURE and INPUT report batteries hid-input/battery: add quirks for battery hid-input/battery: remove apparently redundant kmalloc hid-input: add support for HID devices reporting Battery Strength HID: hid-multitouch: add support 9 new Xiroku devices HID: multitouch: add support for 3M 32" HID: multitouch: add support of Atmel multitouch panels HID: usbhid: defer LED setting to a workqueue HID: usbhid: hid-core: submit queued urbs before suspend HID: usbhid: remove LED_ON HID: emsff: use symbolic name instead of hardcoded PID constant HID: Enable HID_QUIRK_MULTI_INPUT for Trio Linker Plus II HID: Kconfig: fix syntax HID: introduce proper dependency of HID_BATTERY on POWER_SUPPLY HID: multitouch: support PixArt optical touch screen HID: make parser more verbose about parsing errors by default ... Fix up rename/delete conflict in drivers/hid/hid-hyperv.c (removed in staging, moved in this branch) and similarly for the rules for same file in drivers/staging/hv/{Kconfig,Makefile}.
2012-01-09Merge branch 'hid-battery' of ↵Jiri Kosina
git://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen into for-linus
2012-01-08Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial: (53 commits) Kconfig: acpi: Fix typo in comment. misc latin1 to utf8 conversions devres: Fix a typo in devm_kfree comment btrfs: free-space-cache.c: remove extra semicolon. fat: Spelling s/obsolate/obsolete/g SCSI, pmcraid: Fix spelling error in a pmcraid_err() call tools/power turbostat: update fields in manpage mac80211: drop spelling fix types.h: fix comment spelling for 'architectures' typo fixes: aera -> area, exntension -> extension devices.txt: Fix typo of 'VMware'. sis900: Fix enum typo 'sis900_rx_bufer_status' decompress_bunzip2: remove invalid vi modeline treewide: Fix comment and string typo 'bufer' hyper-v: Update MAINTAINERS treewide: Fix typos in various parts of the kernel, and fix some comments. clockevents: drop unknown Kconfig symbol GENERIC_CLOCKEVENTS_MIGR gpio: Kconfig: drop unknown symbol 'CS5535_GPIO' leds: Kconfig: Fix typo 'D2NET_V2' sound: Kconfig: drop unknown symbol ARCH_CLPS7500 ... Fix up trivial conflicts in arch/powerpc/platforms/40x/Kconfig (some new kconfig additions, close to removed commented-out old ones)
2012-01-08Merge branch 'for-linus2' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs * 'for-linus2' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: (165 commits) reiserfs: Properly display mount options in /proc/mounts vfs: prevent remount read-only if pending removes vfs: count unlinked inodes vfs: protect remounting superblock read-only vfs: keep list of mounts for each superblock vfs: switch ->show_options() to struct dentry * vfs: switch ->show_path() to struct dentry * vfs: switch ->show_devname() to struct dentry * vfs: switch ->show_stats to struct dentry * switch security_path_chmod() to struct path * vfs: prefer ->dentry->d_sb to ->mnt->mnt_sb vfs: trim includes a bit switch mnt_namespace ->root to struct mount vfs: take /proc/*/mounts and friends to fs/proc_namespace.c vfs: opencode mntget() mnt_set_mountpoint() vfs: spread struct mount - remaining argument of next_mnt() vfs: move fsnotify junk to struct mount vfs: move mnt_devname vfs: move mnt_list to struct mount vfs: switch pnode.h macros to struct mount * ...
2012-01-08hid-input/battery: add FEATURE quirkJeremy Fitzhardinge
Apple keyboards require a FEATURE report to query the battery state, even though they list as an input. Without this, it returns an error. Signed-off-by: Jeremy Fitzhardinge <jeremy@goop.org>
2012-01-08hid-input/battery: remove battery_valJeremy Fitzhardinge
hidinput_get_battery_property() now directly polls the device for the current battery strength, so there's no need for battery_val, or the code to set it on the input event path. Signed-off-by: Jeremy Fitzhardinge <jeremy@goop.org>
2012-01-08hid-input/battery: power-supply type really *is* a batteryJeremy Fitzhardinge
It just isn't a battery which is powering the computer. upower needs a more nuanced understanding of this. Signed-off-by: Jeremy Fitzhardinge <jeremy@goop.org>
2012-01-08hid-input/battery: make the battery setup common for INPUTs and FEATUREsJeremy Fitzhardinge
Signed-off-by: Jeremy Fitzhardinge <jeremy@goop.org>
2012-01-08hid-input/battery: deal with both FEATURE and INPUT report batteriesJeremy Fitzhardinge
Some devices seem to report batteries as FEATUREs, others as INPUTs. Signed-off-by: Jeremy Fitzhardinge <jeremy@goop.org>
2012-01-08hid-input/battery: add quirks for batteryJeremy Fitzhardinge
Some devices always report percentage, despite having 0/255 as their min/max, so add a quirk for them. Signed-off-by: Jeremy Fitzhardinge <jeremy@goop.org>
2012-01-08hid-input/battery: remove apparently redundant kmallocJeremy Fitzhardinge
Signed-off-by: Jeremy Fitzhardinge <jeremy@goop.org>
2012-01-08hid-input: add support for HID devices reporting Battery StrengthDaniel Nicoletti
I've sent an email earlier asking for help with a GetFeature code, and now I have a second patch on top of Jeremy's to provide the battery functionality for devices that support reporting it. If I understood correctly when talking to Jeremy he said his device never actually reported the status as an input event (sorry if I didn't understand it correctly), and after reading HID specs I believe it's really because it was meant to be probed, I have an Apple Keyboard and Magic Trackpad both bluetooth batteries operated, so using PacketLogger I saw that Mac OSX always ask the battery status using the so called GetFeature. What my patch does is basically: - store the report id that matches the battery_strength - setup the battery if 0x6.0x20 is found, even if that is reported as a feature (as it was meant to be but only the MagicTrackpad does) - when upower or someone access /sys/class/power_supply/hid-*/capacity it will probe the device and return it's status. It works great for both devices, but I have two concerns: - the report_features function has a duplicated code - it would be nice if it was possible for specific drivers to provide their own probe as there might be some strange devices... (but maybe it's already possible) I've talked to the upower dev and he fixed it to be able to show the right percentage. Here how the uevent file (in /sys/class/power_supply/hid-*/) looks like: POWER_SUPPLY_NAME=hid-00:22:41:D9:18:E7-battery POWER_SUPPLY_PRESENT=1 POWER_SUPPLY_ONLINE=1 POWER_SUPPLY_CAPACITY=66 POWER_SUPPLY_MODEL_NAME=MacAdmin’s keyboard POWER_SUPPLY_STATUS=Discharging POWER_SUPPLY_NAME=hid-70:CD:60:F5:FF:3F-battery POWER_SUPPLY_PRESENT=1 POWER_SUPPLY_ONLINE=1 POWER_SUPPLY_CAPACITY=62 POWER_SUPPLY_MODEL_NAME=nexx’s Trackpad POWER_SUPPLY_STATUS=Discharging Signed-off-by: Daniel Nicoletti <dantti12@gmail.com>
2012-01-06Merge branch 'driver-core-next' into Linux 3.2Greg Kroah-Hartman
This resolves the conflict in the arch/arm/mach-s3c64xx/s3c6400.c file, and it fixes the build error in the arch/x86/kernel/microcode_core.c file, that the merge did not catch. The microcode_core.c patch was provided by Stephen Rothwell <sfr@canb.auug.org.au> who was invaluable in the merge issues involved with the large sysdev removal process in the driver-core tree. Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2012-01-05Merge branches 'hyperv', 'multitouch', 'roccat', 'upstream', ↵Jiri Kosina
'upstream-fixes', 'wacom' and 'wiimote' into for-linus
2012-01-05HID: hid-multitouch: add support 9 new Xiroku devicesMasatoshi Hoshikawa
This patch adds support for the Xiroku Inc. panels (SPX/MPX/CSR/etc.). Signed-off-by: Masatoshi Hoshikawa <hoshikawa@xiroku.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2012-01-03switch device_get_devnode() and ->devnode() to umode_t *Al Viro
both callers of device_get_devnode() are only interested in lower 16bits and nobody tries to return anything wider than 16bit anyway. Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2012-01-02misc latin1 to utf8 conversionsAl Viro
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2012-01-02HID: multitouch: add support for 3M 32"Benjamin Tissoires
Signed-off-by: Benjamin Tissoires <benjamin.tissoires@gmail.com> Acked-by: Henrik Rydberg <rydberg@euromail.se> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2012-01-02HID: multitouch: add support of Atmel multitouch panelsBenjamin Tissoires
Signed-off-by: Benjamin Tissoires <benjamin.tissoires@gmail.com> Acked-by: Henrik Rydberg <rydberg@euromail.se> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2011-12-21HID: usbhid: defer LED setting to a workqueueDaniel Kurtz
Defer LED setting action to a workqueue. This is more likely to send all LED change events in a single URB. Signed-off-by: Daniel Kurtz <djkurtz@chromium.org> Acked-by: Oliver Neukum <oneukum@suse.de> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2011-12-21HID: usbhid: hid-core: submit queued urbs before suspendDaniel Kurtz
If any userspace program has opened a keyboard device, the input core de-activates the keyboard's LEDs upon suspend(). It does this by sending individual EV_LED[LED_X]=0 events to the underlying device driver by directly calling the driver's registered event() handler. The usb-hid driver event() handler processes each request by immediately attempting to submit a CTRL URB to turn off the LED. USB URB submission is asynchronous. First the URB is added to the head of the ctrl queue. Then, if the CTRL_RUNNING flag is false, the URB is submitted immediately (and CTRL_RUNNING is set). If the CTRL_RUNNING flag was already true, then the newly queued URB is submitted in the ctrl completion handler when all previously submitted URBs have completed. When all queued URBs have been submitted, the completion handler clears the CTRL_RUNNING flag. In the 2-LED suspend case, at input suspend(), 2 LED event CTRL URBs get queued, with only the first actually submitted. Soon after input suspend() handler finishes, the usb-hid suspend() handler gets called. Since this is NOT a PM_EVENT_AUTO suspend, the handler sets REPORTED_IDLE, then waits for io to complete. Unfortunately, this usually happens while the first LED request is actually still being processed. Thus when the completion handler tries to submit the second LED request it fails, since REPORTED_IDLE is already set! This REPORTED_IDLE check failure causes the completion handler to complete, however without clearing the CTRL_RUNNING flag. This, in turn, means that the suspend() handler's wait_io() condition is never satisfied, and instead it times out after 10 seconds, aborting the original system suspend. This patch changes the behavior to the following: (1) allow completion handler to finish submitting all queued URBs, even if REPORTED_IDLE is set. This guarantees that all URBs queued before the hid-core suspend() call will be submitted before the system is suspended. (2) if REPORTED_IDLE is set and the URB queue is empty, queue, but don't submit, new URB submission requests. These queued requests get submitted when resume() flushes the URB queue. This is similar to the existing behavior, however, any requests that arrive while the queue is not yet empty will still get submitted before suspend. (3) set the RUNNING flag when flushing the URB queue in resume(). This keeps URBs that were queued in (2) from colliding with any new URBs that are being submitted during the resume process. The new URB submission requests upon resume get properly queued behind the ones being flushed instead of the current situation where they collide, causing memory corruption and oopses. Signed-off-by: Daniel Kurtz <djkurtz@chromium.org> Acked-by: Oliver Neukum <oneukum@suse.de> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2011-12-21HID: usbhid: remove LED_ONDaniel Kurtz
LED_ON was defined in the original version of the hid-core autosuspend patch. However, during review, the setting and clearing of it was redone using ledcount. The test was left in accidentally. Signed-off-by: Daniel Kurtz <djkurtz@chromium.org> Acked-by: Oliver Neukum <oneukum@suse.de> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2011-12-21HID: emsff: use symbolic name instead of hardcoded PID constantJiri Kosina
Use macro instead of 0x118 PID in device table. Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2011-12-21HID: Enable HID_QUIRK_MULTI_INPUT for Trio Linker Plus IIIgnaz Forster
Add quirk for the Trio Linker Plus II - the adapter supports several controllers simultaneously, generating a new HID entry for each connected device. Signed-off-by: Ignaz Forster <ignaz.forster@gmx.de> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2011-12-19HID: Kconfig: fix syntaxJiri Kosina
Replace mistakenly used '==' by '='. Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2011-12-16HID: introduce proper dependency of HID_BATTERY on POWER_SUPPLYJiri Kosina
ppc6xx_defconfig reveals this: drivers/built-in.o: In function `hidinput_cleanup_battery': drivers/hid/hid-input.c:351: undefined reference to`power_supply_unregister' drivers/built-in.o: In function `hidinput_setup_battery': drivers/hid/hid-input.c:338: undefined reference to `power_supply_register' make[1]: *** [.tmp_vmlinux1] Error 1 The defconfig in question doens't mention either option and kbuild is genertaing CONFIG_HID_BATTERY_STRENGTH=y CONFIG_POWER_SUPPLY=m which is wrong. Put a proper dependency in place. Reported-by: Tony Breeds <tony@bakeyournoodle.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2011-12-15HID: multitouch: support PixArt optical touch screenAaron Tian
This patch modifies hid-multitouch driver for supporting PixArt optical touch screen. Because of the device does not have to set initial report, we apply "HID_QUIRK_NO_INIT_REPORTS" quirk and add the device into hid_blacklist[] Signed-off-by: Aaron Tian <aaron_tian@pixart.com.tw> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2011-12-15HID: make parser more verbose about parsing errors by defaultJiri Kosina
Most of the parsing errors (typically resulting in device not being claimed by HID subsystem at all) are reported only in debugging mode, which makes root-causing problems with buggy devices unnecessarily more difficult. Convert reporting of important HID report descriptor parsing errors to be reported through hid_err() / hid_warn() instead of dbg_hid(). Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2011-12-12HID: wiimote: Select INPUT_FF_MEMLESSDavid Herrmann
We depend on memless force-feedback support, therefore correctly select the related config options. Reported-by: Randy Dunlap <rdunlap@xenotime.net> Signed-off-by: David Herrmann <dh.herrmann@googlemail.com> Cc: stable@kernel.org Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2011-12-09power_supply: add "powers" links to self-powered HID devicesJeremy Fitzhardinge
Make the relationship between the Wiimote and Wacom self-powered HID devices and their power supply explicit by adding a "powers" link. Signed-off-by: Jeremy Fitzhardinge <jeremy@goop.org> Cc: Jiri Kosina <jkosina@suse.cz>
2011-12-09power_supply: add scope properties to some self-powered HID devicesJeremy Fitzhardinge
The Wacom and Wiimote HID drivers register power supplies for themselves to indicate their battery levels. Make those power supplies device scope. Signed-off-by: Jeremy Fitzhardinge <jeremy@goop.org> Cc: Jiri Kosina <jkosina@suse.cz>
2011-12-06HID: roccat: Add support for Isku keyboardStefan Achatz
This patch adds support for Roccat Isku keyboard. Userland tools can be found at http://sourceforge.net/projects/roccat Signed-off-by: Stefan Achatz <erazor_de@users.sourceforge.net> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2011-12-02Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/jikos/hid * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/hid: HID: Correct General touch PID
2011-12-01HID: hv_mouse: Properly add the hid deviceK. Y. Srinivasan
We need to properly add the hid device to correctly initialize the sysfs state. Signed-off-by: K. Y. Srinivasan <kys@microsoft.com> Signed-off-by: Haiyang Zhang <haiyangz@microsoft.com> Reported-by: Fuzhou Chen <fuzhouch@microsoft.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2011-11-30HID: hid-multitouch: add support for new Hanvon panelsBenjamin Tissoires
Signed-off-by: Benjamin Tissoires <benjamin.tissoires@enac.fr> Acked-by: Henrik Rydberg <rydberg@euromail.se> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2011-11-30HID: multitouch: merge quanta driver into hid-multitouchBenjamin Tissoires
This patch merge the last old-style hid multitouch driver to the generic one. It also adds 2 more quanta pids. Signed-off-by: Benjamin Tissoires <benjamin.tissoires@gmail.com> Acked-by: Henrik Rydberg <rydberg@euromail.se> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2011-11-30HID: hid-input: fix compile for !HID_BATTERY_STRENGTHJeremy Fitzhardinge
As reported by Stephen Rothwell: drivers/hid/hid-input.c: In function 'hidinput_hid_event': drivers/hid/hid-input.c:865:6: error: 'struct hid_device' has no member named 'battery_val' drivers/hid/hid-input.c:866:3: error: 'struct hid_device' has no member named 'battery_min' drivers/hid/hid-input.c:866:3: error: 'struct hid_device' has no member named 'battery_max' Signed-off-by: Jeremy Fitzhardinge <jeremy@goop.org> Reported-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2011-11-28HID: hid-input: add support for HID devices reporting Battery StrengthJeremy Fitzhardinge
Some HID devices, such as my Bluetooth mouse, report their battery strength as an event. Rather than passing it through as a strange absolute input event, this patch registers it with the power_supply subsystem as a battery, so that the device's Battery Strength can be reported to usermode. The battery appears in sysfs names /sys/class/power_supply/hid-<UNIQ>-battery, and it is a child of the battery-containing device, so it should be clear what it's the battery of. Unfortunately on my current Fedora 16 system, while the battery does appear in the UI, it is listed as a Laptop Battery with 0% charge (since it ignores the "capacity" property of the battery and instead computes it from the "energy*" fields, which we can't supply given the limited information contained within the HID Report). Still, this patch is the first step. Signed-off-by: Jeremy Fitzhardinge <jeremy@goop.org> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2011-11-23HID: Correct General touch PIDBenjamin Tissoires
Genera Touch told us that 0001 is their single point device and 0003 is the multitouch one. Apparently, we made the tests someone having a prototype, and not the final product. They said it should be safe to do the switch. This partially reverts 5572da0 ("HID: hid-mulitouch: add support for the 'Sensing Win7-TwoFinger'"). Signed-off-by: Benjamin Tissoires <benjamin.tissoires@gmail.com> Cc: stable@vger.kernel.org Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2011-11-23HID: multitouch: correct eGalax a001 protocolBenjamin Tissoires
This device use another protocol while sending the events. It's the same as the one described as "serial" by Microsoft. We are keeping here the sn_move and sn_pressure parameters for egalax devices. CC: Cedric Sodhi <manday@gmx.net> CC: Chris Bagwell <chris@cnpbagwell.com> Signed-off-by: Benjamin Tissoires <benjamin.tissoires@gmail.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2011-11-23HID: multitouch: add support for the MSI Windpad 110WBenjamin Tissoires
Just another eGalax device. Please note that adding this device to have_special_driver in hid-core.c is not required anymore. Signed-off-by: Benjamin Tissoires <benjamin.tissoires@enac.fr> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2011-11-23HID: multitouch: Add egalax ID for Acer Iconia W500Marek Vasut
This patch adds USB ID for the touchpanel in Acer Iconia W500. The panel supports up to five fingers, therefore the need for a new addition of panel types. Signed-off-by: Marek Vasut <marek.vasut@gmail.com> Signed-off-by: Benjamin Tissoires <benjamin.tissoires@enac.fr> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2011-11-23HID: multitouch: cleanup with eGalax PID definitionsBenjamin Tissoires
This is just a renaming of USB_DEVICE_ID_DWAV_EGALAX_MULTITOUCH{N} to USB_DEVICE_ID_DWAV_EGALAX_MULTITOUCH_{PID} to handle more eGalax devices. Signed-off-by: Benjamin Tissoires <benjamin.tissoires@enac.fr> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2011-11-23HID: multitouch: remove .maxcontacts field for eGalaxBenjamin Tissoires
Some eGalax devices are 4 or 5 fingers touches, wereas others are 2. This patch removes the limit in which all eGalax presents 2 touches. Signed-off-by: Benjamin Tissoires <benjamin.tissoires@enac.fr> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2011-11-23HID: multitouch: cleanup eGalax quirksBenjamin Tissoires
The previous implementation of eGalax protocol was not satisfying as we had to manually set x/y ranges as they were corrupted after reading the report descriptor. Indeed, the report descriptor provided a stylus input interface which override the correct values. This patch omits this input, thus leaving the correct value untouched, and the MT_QUIRK_EGALAX_XYZ_FIXUP not required anymore. Signed-off-by: Benjamin Tissoires <benjamin.tissoires@enac.fr> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2011-11-23HID: multitouch: create sysfs attribute to control quirks from user-spaceBenjamin Tissoires
Signed-off-by: Benjamin Tissoires <benjamin.tissoires@enac.fr> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2011-11-23HID: hid-multitouch - add another eGalax idChris Bagwell
This allows ASUS Eee Slate touchscreens to work. Signed-off-by: Chris Bagwell <chris@cnpbagwell.com> Reviewed-by: Benjamin Tissoires <benjamin.tissoires@gmail.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2011-11-23HID: usbkbd: kill LED URB on disconnectWillem Penninckx
The LED URB was left unkilled when the USB device is disconnected. Signed-off-by: Willem Penninckx <willem.penninckx@cs.kuleuven.be> Signed-off-by: Jiri Kosina <jkosina@suse.cz>