summaryrefslogtreecommitdiff
path: root/drivers/hwmon
AgeCommit message (Collapse)Author
2012-03-14hwmon: (zl6100) Enable interval between chip accesses for all chipsGuenter Roeck
Intersil reports that all chips supported by the zl6100 driver require an interval between chip accesses, even ZL2004 and ZL6105 which were thought to be safe. Reported-by: Vivek Gani <vgani@intersil.com> Cc: stable@vger.kernel.org # 3.2+ Signed-off-by: Guenter Roeck <guenter.roeck@ericsson.com>
2012-03-13hwmon: (w83627ehf) Fix temp2 source for W83627UHGJean Delvare
Properly set the source of temp2 for the W83627UHG. Also fix a comment right before that, and document the W83627UHG as reporting up to 3 temperatures. Signed-off-by: Jean Delvare <khali@linux-fr.org> Cc: Guenter Roeck <guenter.roeck@ericsson.com> Cc: stable@vger.kernel.org Signed-off-by: Guenter Roeck <guenter.roeck@ericsson.com>
2012-03-12hwmon: (w83627ehf) Fix memory leak in probe functionGuenter Roeck
The driver probe function leaked memory if creating the cpu0_vid attribute file failed. Fix by converting the driver to use devm_kzalloc. Signed-off-by: Guenter Roeck <linux@roeck-us.net> Cc: stable@vger.kernel.org # 2.6.32+ Acked-by: Jean Delvare <khali@linux-fr.org>
2012-03-12hwmon: (w83627ehf) Fix writing into fan_stop_time for NCT6775F/NCT6776FGuenter Roeck
NCT6775F and NCT6776F have their own set of registers for FAN_STOP_TIME. The correct registers were used to read FAN_STOP_TIME, but writes used the wrong registers. Fix it. Signed-off-by: Guenter Roeck <linux@roeck-us.net> Cc: stable@vger.kernel.org # 3.0+ Acked-by: Jean Delvare <khali@linux-fr.org>
2012-03-07hwmon: (jc42) Add support for AT30TS00, TS3000GB2, TSE2002GB2, and MCP9804Guenter Roeck
Also update IDT datasheet locations. Signed-off-by: Guenter Roeck <linux@roeck-us.net> Cc: stable@vger.kernel.org # 3.0+ Acked-by: Jean Delvare <khali@linux-fr.org>
2012-03-07hwmon: (zl6100) Maintain delay parameter in driver instance dataGuenter Roeck
A global delay parameter has the side effect of being overwritten with 0 if a single ZL2004 or ZL6105 is instantiated. If other chips supported by the same driver are in the system, this will result in access errors for those chips. To solve the problem, keep a per-instance copy of the delay parameter, and do not change the original parameter. Signed-off-by: Guenter Roeck <linux@roeck-us.net> Cc: stable@vger.kernel.org # 3.1+ Acked-by: Jean Delvare <khali@linux-fr.org>
2012-03-07hwmon: (pmbus_core) Fix maximum number of POUT alarm attributesGuenter Roeck
There are up to three POUT alarm attributes, not two, since cap_alarm was added. Reported-by: Michele Petracca <mi.petracca@gmail.com> Cc: stable@vger.kernel.org # 3.0+ [3.0 will need backport] Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2012-03-07hwmon: (jc42) Add support for ST Microelectronics STTS2002 and STTS3000Jean Delvare
These are fully compatible with Jedec JC 42.4 as far as I can see. Signed-off-by: Jean Delvare <khali@linux-fr.org> Cc: Guenter Roeck <guenter.roeck@ericsson.com> Cc: stable@vger.kernel.org # 3.0+ Signed-off-by: Guenter Roeck <guenter.roeck@ericsson.com>
2012-03-02hwmon: (f75375s) Catch some attempts to write to r/o registersNikolaus Schulz
It makes no sense to attempt to manually configure the fan in auto mode, or set the duty cycle directly in closed loop mode. The corresponding registers are then read-only. If the user tries it nonetheless, error out with EINVAL instead of silently doing nothing. Signed-off-by: Nikolaus Schulz <mail@microschulz.de> [guenter.roeck@ericsson.com: Minor formatting cleanup] Signed-off-by: Guenter Roeck <guenter.roeck@ericsson.com>
2012-03-02hwmon: (f75375s) Properly map the F75387 automatic modes to pwm_enableNikolaus Schulz
The F75387 supports automatic fan control using either PWM duty cycle or RPM speed values. Make the driver detect the latter mode, and expose the different modes in sysfs as per pwm_enable, so that the user can switch between them. The interpretation of the pwm_enable attribute for the F75387 is adjusted to be a superset of those values used for similar Fintek chips which do not support automatic duty mode, with 2 mapping to automatic speed mode, and moving automatic duty mode to the new value 4. Toggling the duty mode via pwm_enable is currently denied for the F75387, as the chip then simply reinterprets the fan configuration register values according to the new mode, switching between RPM and PWM units, which makes this a dangerous operation. This patch introduces a new pwm mode into the driver. This is necessary because the new mode (automatic pwm mode, 4) may already be enabled by the BIOS, and the driver should not break existing functionality. This was seen on at least one board. Signed-off-by: Nikolaus Schulz <mail@microschulz.de> Signed-off-by: Guenter Roeck <guenter.roeck@ericsson.com>
2012-02-28hwmon: (f75375s) Make pwm*_mode writable for the F75387Nikolaus Schulz
Signed-off-by: Nikolaus Schulz <mail@microschulz.de> Signed-off-by: Guenter Roeck <guenter.roeck@ericsson.com>
2012-02-28hwmon: (f75375s) Fix writes to the pwm* attribute for the F75387Nikolaus Schulz
For the F75387, the register holding the current PWM duty cycle value is r/o; changing it requires writing to the fan expect register instead. Signed-off-by: Nikolaus Schulz <mail@microschulz.de> [guenter.roeck@ericsson.com: Simplified function parameters] Signed-off-by: Guenter Roeck <guenter.roeck@ericsson.com>
2012-02-24hwmon: (max34440) Fix resetting temperature historyGuenter Roeck
Temperature history is reset by writing 0x8000 into the peak temperature register, not 0xffff. Signed-off-by: Guenter Roeck <linux@roeck-us.net> Acked-by: Jean Delvare <khali@linux-fr.org>
2012-02-23hwmon: (f75375s) Fix register write order when setting fans to full speedNikolaus Schulz
By hwmon sysfs interface convention, setting pwm_enable to zero sets a fan to full speed. In the f75375s driver, this need be done by enabling manual fan control, plus duty mode for the F875387 chip, and then setting the maximum duty cycle. Fix a bug where the two necessary register writes were swapped, effectively discarding the setting to full-speed. Signed-off-by: Nikolaus Schulz <mail@microschulz.de> Cc: Riku Voipio <riku.voipio@iki.fi> Signed-off-by: Guenter Roeck <guenter.roeck@ericsson.com>
2012-02-23hwmon: (ads1015) Fix file leak in probe functionGuenter Roeck
An error while creating sysfs attribute files in the driver's probe function results in an error abort, but already created files are not removed. This patch fixes the problem. Signed-off-by: Guenter Roeck <guenter.roeck@ericsson.com> Cc: stable@vger.kernel.org # 3.0+ Cc: Dirk Eibach <eibach@gdsys.de> Acked-by: Jean Delvare <khali@linux-fr.org>
2012-02-21hwmon: (max6639) Fix PPR register initialization to set both channelsChris D Schimp
Initialize PPR register for both channels, and set correct PPR register bits. Also remove unnecessary variable initializations. Signed-off-by: Chris D Schimp <silverchris@gmail.com> [guenter.roeck@ericsson.com: Merged two patches into one] Signed-off-by: Guenter Roeck <guenter.roeck@ericsson.com> Cc: stable@vger.kernel.org # 3.0+ Acked-by: Roland Stigge <stigge@antcom.de>
2012-02-21hwmon: (max6639) Fix FAN_FROM_REG calculationChris D Schimp
RPM calculation from tachometer value does not depend on PPR. Also, do not report negative RPM values. Signed-off-by: Chris D Schimp <silverchris@gmail.com> [guenter.roeck@ericsson.com: do not report negative RPM values] Signed-off-by: Guenter Roeck <guenter.roeck@ericsson.com> Cc: stable@vger.kernel.org # 3.0+ Acked-by: Roland Stigge <stigge@antcom.de>
2012-02-09hwmon: (f75375s) Let f75375_update_device treat pwmX as a measured valueNikolaus Schulz
Treat pwmX as a measured value, not as a (mostly static) limit value, so that it is updated more frequently from the device register. Signed-off-by: Nikolaus Schulz <mail@microschulz.de> Signed-off-by: Guenter Roeck <guenter.roeck@ericsson.com>
2012-02-08hwmon: (f75375s) Fix bit shifting in f75375_write16Nikolaus Schulz
In order to extract the high byte of the 16-bit word, shift the word to the right, not to the left. Signed-off-by: Nikolaus Schulz <mail@microschulz.de> Cc: stable@kernel.org # 2.6.32+ Signed-off-by: Guenter Roeck <guenter.roeck@ericsson.com>
2012-02-08hwmon: (f75375s) Fix reading of wrong register when initializing the F75387Nikolaus Schulz
Unlike the other chips supported by this driver, the F75387 stores the pwm_mode in register F75375_REG_FAN_TIMER, not F75375_REG_CONFIG1. Signed-off-by: Nikolaus Schulz <mail@microschulz.de> Signed-off-by: Guenter Roeck <guenter.roeck@ericsson.com>
2012-02-08hwmon: (f75375s) Fix automatic pwm mode setting for F75373 & F75375Nikolaus Schulz
In order to enable temperature mode aka automatic mode for the F75373 and F75375 chips, the two FANx_MODE bits in the fan configuration register need be set to 01, not 10. Signed-off-by: Nikolaus Schulz <mail@microschulz.de> Cc: stable@kernel.org # 2.6.32+ Signed-off-by: Guenter Roeck <guenter.roeck@ericsson.com>
2012-02-08hwmon: (w83627ehf) Remove duplicate codeGuenter Roeck
Commit ec3e5a16446fef1891611fe3bdfa5954d1ddf5e4 slipped in some duplicate code. Remove it. Signed-off-by: Guenter Roeck <guenter.roeck@ericsson.com> Acked-by: Jean Delvare <khali@linux-fr.org>
2012-02-04hwmon: (w83627ehf) Fix number of fans for NCT6776FGuenter Roeck
NCT6776F can select fan input pins for fans 3 to 5 with a secondary set of chip register bits. Check that second set of bits in addition to the first set to detect if fans 3..5 are monitored. Signed-off-by: Guenter Roeck <linux@roeck-us.net> Cc: stable@vger.kernel.org # 3.0+ Acked-by: Jean Delvare <khali@linux-fr.org>
2012-01-29hwmon: (w83627ehf) Disable setting DC mode for pwm2, pwm3 on NCT6776FGuenter Roeck
NCT6776F only supports pwm mode for pwm2 and pwm3. Return error if an attempt is made to set those pwm channels to DC mode. Signed-off-by: Guenter Roeck <linux@roeck-us.net> Acked-by: Jean Delvare <khali@linux-fr.org> Cc: stable@vger.kernel.org # 3.0+ Signed-off-by: Guenter Roeck <guenter.roeck@ericsson.com>
2012-01-29hwmon: (sht15) fix bad error codeVivien Didelot
When no platform data was supplied, returned error code was 0. Signed-off-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com> Cc: stable@vger.kernel.org # 2.6.32+ Signed-off-by: Guenter Roeck <guenter.roeck@ericsson.com>
2012-01-20hwmon: (f71805f) Fix clamping of temperature limitsJean Delvare
Properly clamp temperature limits set by the user. Without this fix, attempts to write temperature limits above the maximum supported by the chip (255 degrees Celsius) would arbitrarily and unexpectedly result in the limit being set to 0 degree Celsius. Signed-off-by: Jean Delvare <khali@linux-fr.org> Cc: stable@vger.kernel.org Signed-off-by: Guenter Roeck <guenter.roeck@ericsson.com>
2012-01-16hwmon: (adm1031) Fix coding style issuesGuenter Roeck
Fix almost all coding style issues except for the multi-line macro errors, which do not really apply since the macros are not multi-line statements but declarations. Based on merged patch series from Zac Storer; fixed remaining checkpatch errors and warnings. Cc: Zac Storer <zac.3.14159@gmail.com> Signed-off-by: Guenter Roeck <guenter.roeck@ericsson.com> Signed-off-by: Jean Delvare <khali@linux-fr.org>
2012-01-16hwmon: (it87) Add IT8728F supportJean Delvare
Until we get a datasheet for the IT8728F, treat it as fully compatible with the IT8721F, as it seems to work reasonably well. This closes kernel bug #27262. Signed-off-by: Jean Delvare <khali@linux-fr.org> Acked-by: Guenter Roeck <guenter.roeck@ericsson.com>
2012-01-16hwmon: (coretemp) Add missing section annotationsJean Delvare
Many functions in the coretemp driver lack a proper section annotation. Add them to let the kernel free the memory after initialization when possible. Signed-off-by: Jean Delvare <khali@linux-fr.org> Cc: Durgadoss R <durgadoss.r@intel.com> Acked-by: Guenter Roeck <guenter.roeck@ericsson.com> Cc: Fenghua Yu <fenghua.yu@intel.com>
2012-01-16hwmon: (lm90) Add range check to set_update_intervalGuenter Roeck
When writing the update_interval attribute, the parameter value was not range checked, which could cause an integer overflow and result in an arbitrary update interval. Fix by limiting the value range to <0, 100000>. Reported-by: Jean Delvare <khali@linux-fr.org> Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Jean Delvare <khali@linux-fr.org>
2012-01-16hwmon: (lm63) Support extended lookup table of LM96163Jean Delvare
The LM96163 has an extended lookup table with 12 entries instead of 8, add support for that. Signed-off-by: Jean Delvare <khali@linux-fr.org> Tested-by: Guenter Roeck <guenter.roeck@ericsson.com> Acked-by: Guenter Roeck <guenter.roeck@ericsson.com>
2012-01-16hwmon: (lm63) Expose automatic fan speed control lookup tableJean Delvare
The LM63 and compatible devices have a lookup table to control the fan speed automatically. Expose it in sysfs. Values are cached for 5 seconds, independently of the other register values to avoid slowing down "sensors". We might make the table values writable in the future. Signed-off-by: Jean Delvare <khali@linux-fr.org> Tested-by: Guenter Roeck <guenter.roeck@ericsson.com> Acked-by: Guenter Roeck <guenter.roeck@ericsson.com>
2012-01-16hwmon: (lm63) Fix incorrect comment about I2C addressJean Delvare
What was true of the LM63 doesn't apply to the LM64. Signed-off-by: Jean Delvare <khali@linux-fr.org> Acked-by: Guenter Roeck <guenter.roeck@ericsson.com>
2012-01-16hwmon: (lm63) LM64 has a dedicated pin for tachometerJean Delvare
On the LM64, the tachometer function has a dedicated pin and fan speed monitoring is always enabled. Signed-off-by: Jean Delvare <khali@linux-fr.org> Acked-by: Guenter Roeck <guenter.roeck@ericsson.com>
2012-01-16hwmon: (lm63) Add sensor type attribute for external sensor on LM96163Guenter Roeck
On LM96163, the external temperature sensor type is configurable to either a thermal diode or a 3904 transistor. The chip reports a wrong temperature if misconfigured. Add writable attribute to support it. Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Jean Delvare <khali@linux-fr.org>
2012-01-16hwmon: (lm63) Add support for update_interval sysfs attributeGuenter Roeck
The update interval is configurable on LM63 and compatibles. Add support for it. Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Jean Delvare <khali@linux-fr.org>
2012-01-16hwmon: (lm63) Add support for writing the external critical temperatureGuenter Roeck
On LM64, the external critical temperature limit is always writable. On LM96163, it is writable if the chip is configured for it. Add conditional support for writing the register dependent on chip type and configuration. Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Jean Delvare <khali@linux-fr.org>
2012-01-16hwmon: (lm63) Add support for unsigned upper temperature limitsGuenter Roeck
LM96163 supports unsigned upper limits for the external temperature sensor. Add support for it. Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Jean Delvare <khali@linux-fr.org>
2012-01-16hwmon: (lm63) Add support for LM96163Guenter Roeck
LM96163 is an enhanced version of LM63 with improved PWM resolution. Add chip detection code as well as support for improved PWM resolution if the chip is configured to use it. Signed-off-by: Guenter Roeck <guenter.roeck@ericsson.com> Tested-by: Thierry Reding <thierry.reding@avionic-design.de> Signed-off-by: Jean Delvare <khali@linux-fr.org>
2012-01-16hwmon: (lm63) Add support for external temperature offset registerGuenter Roeck
LM63 and compatibles support a temperature offset register for the external temperature sensor. Add support for it. Signed-off-by: Guenter Roeck <guenter.roeck@ericsson.com> Signed-off-by: Jean Delvare <khali@linux-fr.org>
2012-01-16hwmon: (lm63) Fix checkpatch errorsGuenter Roeck
Signed-off-by: Guenter Roeck <guenter.roeck@ericsson.com> Tested-by: Thierry Reding <thierry.reding@avionic-design.de> Signed-off-by: Jean Delvare <khali@linux-fr.org>
2012-01-16hwmon: (max1111) Change sysfs interface to in[0-3]_input in millivoltsEric Miao
This patch fixed the inconsistent max1111 sysfs interface as pointed out by Jean Delvare: It was pointed to me that the max1111 driver doesn't implement the standard sysfs interface for hwmon drivers (as described in Documentation/hwmon/sysfs-interface). It exports files adc[0-3]_in, which aren't part of the standard interface. Presumably these should be renamed to in[0-3]_input. Renaming them is probably not sufficient though, as I see no scaling done in the driver. As the MAX1111 chip has a documented full scale of 2.048V, I take it that the LSB of the ADC has a weight of 8 mV. Exporting raw register values to user-space is not OK. Reported-by: Jean Delvare <khali@linux-fr.org> Signed-off-by: Eric Miao <eric.y.miao@gmail.com> Signed-off-by: Jean Delvare <khali@linux-fr.org>
2012-01-13module_param: make bool parameters really bool (drivers & misc)Rusty Russell
module_param(bool) used to counter-intuitively take an int. In fddd5201 (mid-2009) we allowed bool or int/unsigned int using a messy trick. It's time to remove the int/unsigned int option. For this version it'll simply give a warning, but it'll break next kernel version. Acked-by: Mauro Carvalho Chehab <mchehab@redhat.com> Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
2012-01-13module_param: avoid bool abuse, add bint for special cases.Rusty Russell
For historical reasons, we allow module_param(bool) to take an int (or an unsigned int). That's going away. A few drivers really want an int: they set it to -1 and a parameter will set it to 0 or 1. This sucks: reading them from sysfs will give 'Y' for both -1 and 1, but if we change it to an int, then the users might be broken (if they did "param" instead of "param=1"). Use a new 'bint' parser for them. (ntfs has a different problem: it needs an int for debug_msgs because it's also exposed via sysctl.) Cc: Steve Glendinning <steve.glendinning@smsc.com> Cc: Jean Delvare <khali@linux-fr.org> Cc: Guenter Roeck <guenter.roeck@ericsson.com> Cc: Hoang-Nam Nguyen <hnguyen@de.ibm.com> Cc: Christoph Raisch <raisch@de.ibm.com> Cc: Roland Dreier <roland@kernel.org> Cc: Sean Hefty <sean.hefty@intel.com> Cc: Hal Rosenstock <hal.rosenstock@gmail.com> Cc: linux390@de.ibm.com Cc: Anton Altaparmakov <anton@tuxera.com> Cc: Jaroslav Kysela <perex@perex.cz> Cc: Takashi Iwai <tiwai@suse.de> Cc: lm-sensors@lm-sensors.org Cc: linux-rdma@vger.kernel.org Cc: linux-s390@vger.kernel.org Cc: linux-ntfs-dev@lists.sourceforge.net Cc: alsa-devel@alsa-project.org Acked-by: Takashi Iwai <tiwai@suse.de> (For the sound part) Acked-by: Guenter Roeck <guenter.roeck@ericsson.com> (For the hwmon driver) Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
2012-01-08Merge branch 'hwmon-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging * 'hwmon-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging: max1111.c: fix checkpatch warning hwmon: (lm75) fix checkpatch warnings hwmon: (lm80) fix checkpatch messages hwmon: replaced strict_str* with kstr* hwmon: (lm75) fix checkpatch warning hwmon: (lm75) added error handling hwmon: (ltc4261) set data->valid to 0 if error hwmon: (f75375s) Add support for F75387SG/RG hwmon: (f75375s) Disable setting DC fan control mode for F75373 hwmon: (f75375s) Initialize pwmX_mode and pwmX_enable if there is no platform data hwmon: (f75375s) Fix value range for PWM modes hwmon: (f75375s) Use standard sysfs attribute names hwmon: (f75375s) Fix checkpatch errors and warnings hwmon: (pmbus/zl6100) Only instantiate external temperature sensor if enabled hwmon: (pmbus/zl6100) Add support for Ericsson BMR45[0,1] and BMR46[2,3,4] hwmon: (pmbus/zl6100) Add support for ZL2005 hwmon: (pmbus/adm1275) Validate device ID
2012-01-08Merge branch 'for-linus2' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs * 'for-linus2' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: (165 commits) reiserfs: Properly display mount options in /proc/mounts vfs: prevent remount read-only if pending removes vfs: count unlinked inodes vfs: protect remounting superblock read-only vfs: keep list of mounts for each superblock vfs: switch ->show_options() to struct dentry * vfs: switch ->show_path() to struct dentry * vfs: switch ->show_devname() to struct dentry * vfs: switch ->show_stats to struct dentry * switch security_path_chmod() to struct path * vfs: prefer ->dentry->d_sb to ->mnt->mnt_sb vfs: trim includes a bit switch mnt_namespace ->root to struct mount vfs: take /proc/*/mounts and friends to fs/proc_namespace.c vfs: opencode mntget() mnt_set_mountpoint() vfs: spread struct mount - remaining argument of next_mnt() vfs: move fsnotify junk to struct mount vfs: move mnt_devname vfs: move mnt_list to struct mount vfs: switch pnode.h macros to struct mount * ...
2012-01-06Merge branch 'x86-apic-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip * 'x86-apic-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86: Skip cpus with apic-ids >= 255 in !x2apic_mode x86, x2apic: Allow "nox2apic" to disable x2apic mode setup by BIOS x86, x2apic: Fallback to xapic when BIOS doesn't setup interrupt-remapping x86, acpi: Skip acpi x2apic entries if the x2apic feature is not present x86, apic: Add probe() for apic_flat x86: Simplify code by removing a !SMP #ifdefs from 'struct cpuinfo_x86' x86: Convert per-cpu counter icr_read_retry_count into a member of irq_stat x86: Add per-cpu stat counter for APIC ICR read tries pci, x86/io-apic: Allow PCI_IOAPIC to be user configurable on x86 x86: Fix the !CONFIG_NUMA build of the new CPU ID fixup code support x86: Add NumaChip support x86: Add x86_init platform override to fix up NUMA core numbering x86: Make flat_init_apic_ldr() available
2012-01-05max1111.c: fix checkpatch warningFrans Meulenbroeks
Signed-off-by: Frans Meulenbroeks <fransmeulenbroeks@gmail.com> Signed-off-by: Guenter Roeck <guenter.roeck@ericsson.com>
2012-01-05hwmon: (lm75) fix checkpatch warningsFrans Meulenbroeks
Fix checkpatch warnings in lm75.h include file Signed-off-by: Frans Meulenbroeks <fransmeulenbroeks@gmail.com> Signed-off-by: Guenter Roeck <guenter.roeck@ericsson.com>
2012-01-05hwmon: (lm80) fix checkpatch messagesFrans Meulenbroeks
Fixed all checkpatch messages except simple_strto* -> kstr* This will be addressed in a separate patch Also left one line-too-long message as it was only a little bit too long and would become less readable compile-tested: no warnings or errors Signed-off-by: Frans Meulenbroeks <fransmeulenbroeks@gmail.com> Signed-off-by: Guenter Roeck <guenter.roeck@ericsson.com>