summaryrefslogtreecommitdiff
path: root/drivers/i2c
AgeCommit message (Collapse)Author
2011-12-06drivers: i2c: nomadik: Coding style correctionsJonas Aaberg
Change-Id: Ib874ec36ebd2847aa3ab25fca119a82000ed6918 Signed-off-by: Jonas Aaberg <jonas.aberg@stericsson.com> Reviewed-on: http://gerrit.lud.stericsson.com/gerrit/33027 Reviewed-by: Srinidhi KASAGAR <srinidhi.kasagar@stericsson.com> Reviewed-by: QABUILD
2011-12-06i2c-nomadik: Reset the hw after status checkPhilippe Langlais
In case of I2C timeout, reset the HW only after the HW status is read, otherwise the staus will be lost. ST-Ericsson ID: ER334949 Change-Id: I93295122fa38d0ea82780d54af7f5de1fa099369 Signed-off-by: Virupax Sadashivpetimath <virupax.sadashivpetimath@stericsson.com> Reviewed-on: http://gerrit.lud.stericsson.com/gerrit/20986 Reviewed-by: Jonas ABERG <jonas.aberg@stericsson.com> Reviewed-by: Srinidhi KASAGAR <srinidhi.kasagar@stericsson.com> Conflicts: drivers/i2c/busses/i2c-nomadik.c
2011-12-06i2c-nomadik: Remove the unnecessary delayPhilippe Langlais
The delay in the driver seems to be not needed, so remove it. ST-Ericsson ID: 323012 Change-Id: Id7d3c286063b271bc5f204fb08c289653ba76776 Signed-off-by: Virupax Sadashivpetimath <virupax.sadashivpetimath@stericsson.com> Reviewed-on: http://gerrit.lud.stericsson.com/gerrit/17673 Reviewed-by: Markus GRAPE <markus.grape@stericsson.com> Tested-by: Per PERSSON <per.xb.persson@stericsson.com> Tested-by: Chethan Krishna N <chethan.krishna@stericsson.com> Reviewed-by: Srinidhi KASAGAR <srinidhi.kasagar@stericsson.com> Conflicts: drivers/i2c/busses/i2c-nomadik.c
2011-12-06i2c-nomadik: Add code to retry on timeout failure and set i2c clock to 400KHzPhilippe Langlais
It is seen that i2c-nomadik controller randomly stops generating the interrupts leading to a i2c timeout. As a workaround to this problem add retries, to the on going transfer on failure. Since this behaviour does not get changed with a wait for longer duration, the timeout can be reduced to a lower value, leading to a quicker retry attempt. ST-Ericsson ID: ER 325661 Signed-off-by: Virupax Sadashivpetimath <virupax.sadashivpetimath@stericsson.com> Change-Id: Ic9db2b15ff5ce7e656cbbdfeb19270da9e32f9d1 Reviewed-on: http://gerrit.lud.stericsson.com/gerrit/16972 Tested-by: Virupax SADASHIVPETIMATH <virupax.sadashivpetimath@stericsson.com> Reviewed-by: Jonas ABERG <jonas.aberg@stericsson.com>
2011-12-06nmk-i2c: use pm_runtime APIPhilippe Langlais
Use the pm_runtime API for pins control. ST-Ericsson Linux next: - ST-Ericsson ID: ER323382 ST-Ericsson FOSS-OUT ID: Trivial Change-Id: Ib847143b96950c25221c6aa25dae541017840677 Reviewed-on: http://gerrit.lud.stericsson.com/gerrit/16045 Tested-by: Rabin VINCENT <rabin.vincent@stericsson.com> Reviewed-by: Srinidhi KASAGAR <srinidhi.kasagar@stericsson.com> Reviewed-by: Jonas ABERG <jonas.aberg@stericsson.com>
2011-12-06i2c-nomadik: Add code to retry on timeout failure and set i2c clock to 400KHzPhilippe Langlais
It is seen that i2c-nomadik controller randomly stops generating the interrupts leading to a i2c timeout. As a workaround to this problem add retries, to the on going transfer on failure. Since this behaviour does not get changed with a wait for longer duration, the timeout can be reduced to a lower value, leading to a quicker retry attempt. ST-Ericsson ID: ER 325661 Signed-off-by: Virupax Sadashivpetimath <virupax.sadashivpetimath@stericsson.com> Change-Id: Ic9db2b15ff5ce7e656cbbdfeb19270da9e32f9d1 Reviewed-on: http://gerrit.lud.stericsson.com/gerrit/16972 Tested-by: Virupax SADASHIVPETIMATH <virupax.sadashivpetimath@stericsson.com> Reviewed-by: Jonas ABERG <jonas.aberg@stericsson.com>
2011-12-06nmk-i2c: use pm_runtime APIPhilippe Langlais
Use the pm_runtime API for pins control. ST-Ericsson Linux next: - ST-Ericsson ID: ER323382 ST-Ericsson FOSS-OUT ID: Trivial Change-Id: Ib847143b96950c25221c6aa25dae541017840677 Reviewed-on: http://gerrit.lud.stericsson.com/gerrit/16045 Tested-by: Rabin VINCENT <rabin.vincent@stericsson.com> Reviewed-by: Srinidhi KASAGAR <srinidhi.kasagar@stericsson.com> Reviewed-by: Jonas ABERG <jonas.aberg@stericsson.com>
2011-12-06i2c: nomadic-i2c driver updates for clock and power, busy managementPhilippe Langlais
Moreover driver documentation is added in DocBook Signed-off-by: Jonas Aaberg <jonas.aberg@stericsson.com> Signed-off-by: Mian Yousaf Kaukab <mian.yousaf.kaukab@stericsson.com>
2011-09-07i2c-tegra: fix possible race condition after txDoug Anderson
In tegra_i2c_fill_tx_fifo, once we have finished pushing all the bytes to the I2C hardware controller, the interrupt might happen before we have updated i2c_dev->msg_buf_remaining at the end of the function. Then, in tegra_i2c_isr, we will call again tegra_i2c_fill_tx_fifo triggering weird behaviour. This has been shown to happen under real conditions. Signed-off-by: Doug Anderson <dianders@chromium.org> Tested-by: Vincent Palatin <vpalatin@chromium.org> Acked-by: Rhyland Klein <rklein@nvidia.com> Acked-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2011-09-07i2c-tegra: add I2C_FUNC_SMBUS_EMULMike Rapoport
Signed-off-by: Mike Rapoport <mike@compulab.co.il> Signed-off-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2011-09-07i2c-tegra: Add of_match_tableJohn Bonesio
This patch was intended to be part of 7ca2d1a105a239e300b937e9c41a10a4bd08f569 "i2c: Tegra: Add DeviceTree support". However, an early version of that patch, which was missing a chunk, was applied to next-i2c. This change is that missing chunk. Signed-off-by: John Bonesio <bones@secretlab.ca> Signed-off-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2011-09-07i2c-pxa2xx: return proper error code in ce4100_i2c_probe error pathsAxel Lin
Signed-off-by: Axel Lin <axel.lin@gmail.com> Acked-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2011-08-24i2c-nomadik: fix kerneldoc warningLinus Walleij
There was a missing struct item in the kerneldoc, add it and fix another pretty-printing formatting issue with a missing space. Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2011-08-23Revert "i2c-omap: fix static suspend vs. runtime suspend"Kevin Hilman
This reverts commit adf6e07922255937c8bfeea777d19502b4c9a2be. Remove system PM methods which can race with runtime PM methods. Also, as of v3.1, the PM domain level code for OMAP handles device power state transistions automatically for devices, so drivers no longer need to specifically call the bus/pm_domain methods themselves. Signed-off-by: Kevin Hilman <khilman@ti.com> Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2011-08-23i2c-nomadik: Do not use _interruptible_ variant callsrinidhi kasagar
If there is a signal pending and wait_for_completion_interruptible_timeout exited because of the -ERESTARTSYS error we are unable to send any more i2c messages. So, deprecate this _interruptible_ variant call. Signed-off-by: Srinidhi Kasagar <srinidhi.kasagar@stericsson.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2011-07-27i2c-eg20t : Fix the issue of Combined R/W transfer modeTomoya MORINAGA
issue-1 In case combined transfer mode fails halfway, the processing must be stopped halfway. However currently, the processing is continued. This patch breaks the processing. issue-2 Currently, pch_i2c_xfer returns read/write size at that time. However pch_i2c_xfer must return the number of messages to be read/written. This patch modifies correctly. Signed-off-by: Tomoya MORINAGA <tomoya-linux@dsn.okisemi.com> Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2011-07-27i2c-eg20t : Support Combined R/W transfer modeTomoya MORINAGA
Currently, Combined R/W transfer mode is not supported. This patch enables Combined R/W transfer mode. Signed-off-by: Tomoya MORINAGA <tomoya-linux@dsn.okisemi.com> Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2011-07-27i2c: Tegra: Add DeviceTree supportJohn Bonesio
This patch modifies the tegra i2c driver so that it can be initiailized using the device tree along with the devices connected to the i2c bus. Signed-off-by: John Bonesio <bones@secretlab.ca> Acked-by: Grant Likely <grant.likely@secretlab.ca> Acked-by: OIof Johansson <olof@lixom.net> Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2011-07-25Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial: (43 commits) fs: Merge split strings treewide: fix potentially dangerous trailing ';' in #defined values/expressions uwb: Fix misspelling of neighbourhood in comment net, netfilter: Remove redundant goto in ebt_ulog_packet trivial: don't touch files that are removed in the staging tree lib/vsprintf: replace link to Draft by final RFC number doc: Kconfig: `to be' -> `be' doc: Kconfig: Typo: square -> squared doc: Konfig: Documentation/power/{pm => apm-acpi}.txt drivers/net: static should be at beginning of declaration drivers/media: static should be at beginning of declaration drivers/i2c: static should be at beginning of declaration XTENSA: static should be at beginning of declaration SH: static should be at beginning of declaration MIPS: static should be at beginning of declaration ARM: static should be at beginning of declaration rcu: treewide: Do not use rcu_read_lock_held when calling rcu_dereference_check Update my e-mail address PCIe ASPM: forcedly -> forcibly gma500: push through device driver tree ... Fix up trivial conflicts: - arch/arm/mach-ep93xx/dma-m2p.c (deleted) - drivers/gpio/gpio-ep93xx.c (renamed and context nearby) - drivers/net/r8169.c (just context changes)
2011-07-25i2c: Allow i2c_add_numbered_adapter() to assign a bus idGrant Likely
Currently, if an i2c bus driver supports both static and dynamic bus ids, it needs to choose between calling i2c_add_numbered_adapter() and i2c_add_adapter(). This patch makes i2c_add_numbered_adapter() redirect to i2c_add_adapter() if the requested bus id is -1. Signed-off-by: Grant Likely <grant.likely@secretlab.ca> Signed-off-by: Jean Delvare <khali@linux-fr.org>
2011-07-25i2c-ali1535: Fix style issuesLABBE Corentin
This is a fix-style patch for i2c-ali1535 (issues reported by checkpatch.pl.) Signed-off-by: LABBE Corentin <corentin.labbe@geomatys.fr> Signed-off-by: Jean Delvare <khali@linux-fr.org>
2011-07-11doc: Kconfig: Typo: square -> squaredMichael Witten
Signed-off-by: Michael Witten <mfwitten@gmail.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2011-07-11Merge branch 'master' into for-nextJiri Kosina
Sync with Linus' tree to be able to apply pending patches that are based on newer code already present upstream.
2011-07-11drivers/i2c: static should be at beginning of declarationJesper Juhl
Make sure that the 'static' keywork is at the beginning of declaration for drivers/i2c/busses/i2c-omap.c This gets rid of warnings like warning: ‘static’ is not at beginning of declaration when building with -Wold-style-declaration (and/or -Wextra which also enables it). Signed-off-by: Jesper Juhl <jj@chaosbits.net> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2011-07-07Merge branch 'for-30-rc5/all-i2c' of git://git.fluff.org/bjdooks/linuxLinus Torvalds
* 'for-30-rc5/all-i2c' of git://git.fluff.org/bjdooks/linux: i2c-bfin-twi: abort transfer is MEM bit is reset unexpectedly i2c-s3c2410: Remove useless break code i2c-s3c2410: Fix typo 'i2s' -> 'i2c' i2c: tegra: Assign unused slave address
2011-06-29i2c/pca954x: Initialize the mux to disconnected statePetri Gynther
pca954x power-on default is channel 0 connected. If multiple pca954x muxes are connected to the same physical I2C bus, the parent bus will see channel 0 devices behind both muxes by default. This is bad. Scenario: -- pca954x @ 0x70 -- ch 0 (I2C-bus-101) -- EEPROM @ 0x50 | I2C-bus-1 --- | -- pca954x @ 0x71 -- ch 0 (I2C-bus-111) -- EEPROM @ 0x50 1. Load I2C bus driver: creates I2C-bus-1 2. Load pca954x driver: creates virtual I2C-bus-101 and I2C-bus-111 3. Load eeprom driver 4. Try to read EEPROM @ 0x50 on I2C-bus-101. The transaction will also bleed onto I2C-bus-111 because pca954x @ 0x71 channel 0 is connected by default. Fix: Initialize pca954x to disconnected state in pca954x_probe() Signed-off-by: Petri Gynther <pgynther@google.com> Signed-off-by: Jean Delvare <khali@linux-fr.org> Cc: stable@kernel.org
2011-06-29i2c-taos-evm: Fix log messagesJean Delvare
* Print all error and information messages even when debugging is disabled. * Don't use adapter device to log messages before it is ready. Signed-off-by: Jean Delvare <khali@linux-fr.org> Cc: stable@kernel.org
2011-06-27Merge branches 'for-30-rc4/i2c-bfin', 'for-30-rc4/i2c-omap', ↵Ben Dooks
'for-30-rc4/i2c-s3c' and 'for-30-rc4/i2c-tegra' into for-30-rc5/all-i2c
2011-06-27i2c-bfin-twi: abort transfer is MEM bit is reset unexpectedlySonic Zhang
Sometimes, the first I2C transmit interrupt is not serviced in time (like when higher priority interrupts take too long). Since the RESTART bit is not set before the next I2C clock, when the TWI handler is finally called, the I2C session is aborted (MEM bit is reset) and both SMITSERV and MCOMP int status bits are set. So when this happens, abort the transfer. Reported-by: Isabelle Leonardi <i.leonardi@detracom.fr> Signed-off-by: Sonic Zhang <sonic.zhang@analog.com> Signed-off-by: Mike Frysinger <vapier@gentoo.org> Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2011-06-27i2c-s3c2410: Remove useless break codeJonghwan Choi
Signed-off-by: Jonghwan Choi <jhbird.choi@samsung.com> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com> Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2011-06-27i2c-s3c2410: Fix typo 'i2s' -> 'i2c'Huisung Kang
Signed-off-by: Huisung Kang <hs1218.kang@samsung.com> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com> Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2011-06-27i2c: tegra: Assign unused slave addressStephen Warren
On Tegra, we should always use the "new" I2C slave controller, to avoid issues with the old controller. This was implemented in commit 65a1a0a "i2c: tegra: Enable new slave mode." There is currently no driver for the Tegra I2C slave controller upstream. Additionally, the controller cannot be completely disabled. Instead, we need to: a) Set I2C_SL_CNFG_NACK to make the controller automatically NACK any incoming transactions. b) The controller's definition of NACK isn't identical to the I2C protocol's definition. Specifically, it will perform a standard NACK, but *also* continue to hold the clock line low in expectation of receiving more data. This can hang the bus, or at least cause transaction timeouts, if something starts a transaction that matches the controller's slave address. Since the default address is 0x00, the general call address, this does occur in practice. To avoid this, we explicitly program a slave address that is reserved for future expansion. For current boards, this guarantees the address will never be used. If a future board ever needs to use this address, we can add platform data to determine a board-specific safe address. 0xfc is picked by this patch. This patch is based on a change previously posted by: Wei Ni <wni@nvidia.com> http://www.spinics.net/lists/linux-i2c/msg05437.html In turned based on internal changes by: Bharat Nihalani <bnihalani@nvidia.com> A semantically equivalent change has been contained in the various ChromeOS kernels for a while. I tested this change on top of 3.0-rc2 on Harmony, and interacted with the WM8903 I2C-based audio codec. Signed-off-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2011-06-24treewide: transciever/transceiver spelling fixesJoe Perches
Just tyops. Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2011-05-26mfd: Use mfd cell platform_data for timberdale cells platform bitsSamuel Ortiz
With the addition of a device platform mfd_cell pointer, MFD drivers can go back to passing platform data back to their sub drivers. This allows for an mfd_cell->mfd_data removal and thus keep the sub drivers MFD agnostic. This is mostly needed for non MFD aware sub drivers. Acked-by: Richard Röjfors <richard.rojfors@pelagicore.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2011-05-24Merge branch 'for-linus/2640/i2c' of git://git.fluff.org/bjdooks/linuxLinus Torvalds
* 'for-linus/2640/i2c' of git://git.fluff.org/bjdooks/linux: (21 commits) mach-ux500: set proper I2C platform data from MOP500s i2c-nomadik: break out single messsage transmission i2c-nomadik: reset the hw after status check i2c-nomadik: remove the unnecessary delay i2c-nomadik: change the TX and RX threshold i2c-nomadik: add code to retry on timeout failure i2c-nomadik: use pm_runtime API i2c-nomadik: print abort cause only on abort tag i2c-nomadik: correct adapter timeout initialization i2c-nomadik: remove the redundant error message i2c-nomadik: corrrect returned error numbers i2c-nomadik: fix speed enumerator i2c-nomadik: make i2c timeout specific per i2c bus i2c-nomadik: add regulator support i2c: i2c-sh_mobile bus speed platform data V2 i2c: i2c-sh_mobile clock string removal i2c-eg20t: Support new device ML7223 IOH i2c: tegra: Add de-bounce cycles. i2c: tegra: fix repeated start handling i2c: tegra: recover from spurious interrupt storm ...
2011-05-25Merge branches 'for-2639/i2c-eg20t', 'for-2639/i2c-shmobile', ↵Ben Dooks
'for-2639/i2c-tegra' and 'for-2639/i2c-nomadik2' into for-linus/2640/i2c
2011-05-25i2c-nomadik: break out single messsage transmissionLinus Walleij
Reduce code size in the message transfer function by factoring out a single-message transfer function. Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2011-05-25i2c-nomadik: reset the hw after status checkVirupax Sadashivpetimath
In case of I2C timeout, reset the HW only after the HW status is read, otherwise the staus will be lost. Signed-off-by: Virupax Sadashivpetimath <virupax.sadashivpetimath@stericsson.com> Reviewed-by: Jonas Aberg <jonas.aberg@stericsson.com> Reviewed-by: Srinidhi Kasagar <srinidhi.kasagar@stericsson.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2011-05-25i2c-nomadik: remove the unnecessary delayVirupax Sadashivpetimath
The delay in the driver seems to be not needed, so remove it. Signed-off-by: Virupax Sadashivpetimath <virupax.sadashivpetimath@stericsson.com> Reviewed-by: Markus Grape <markus.grape@stericsson.com> Tested-by: Per Persson <per.xb.persson@stericsson.com> Tested-by: Chethan Krishna N <chethan.krishna@stericsson.com> Reviewed-by: Srinidhi Kasagar <srinidhi.kasagar@stericsson.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2011-05-25i2c-nomadik: change the TX and RX thresholdVirupax Sadashivpetimath
1) Increase RX FIFO threshold so that there is a reduction in the number of interrupts handled to complete a transaction. 2) Fill TX FIFO in the write function. Signed-off-by: Virupax Sadashivpetimath <virupax.sadashivpetimath@stericsson.com> Reviewed-by: Jonas Aberg <jonas.aberg@stericsson.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2011-05-25i2c-nomadik: add code to retry on timeout failureVirupax Sadashivpetimath
It is seen that i2c-nomadik controller randomly stops generating the interrupts leading to a i2c timeout. As a workaround to this problem, add retries to the on going transfer on failure. Signed-off-by: Virupax Sadashivpetimath <virupax.sadashivpetimath@stericsson.com> Reviewed-by: Jonas ABERG <jonas.aberg@stericsson.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2011-05-25i2c-nomadik: use pm_runtime APIRabin Vincent
Use the pm_runtime API for pins control. Signed-off-by: Rabin Vincent <rabin.vincent@stericsson.com> Reviewed-by: Srinidhi Kasagar <srinidhi.kasagar@stericsson.com> Reviewed-by: Jonas Aberg <jonas.aberg@stericsson.com> [deleted some surplus runtime PM code] Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2011-05-25i2c-nomadik: print abort cause only on abort tagVirupax Sadashivpetimath
Modify the code to: 1)Print the cause of i2c failure only if the status is set to ABORT. 2)Print slave address on send/receive fail, will help in which slave failed. Signed-off-by: Virupax Sadashivpetimath <virupax.sadashivpetimath@stericsson.com> Reviewed-by: Jonas Aberg <jonas.aberg@stericsson.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2011-05-25i2c-nomadik: correct adapter timeout initializationVirupax Sadashivpetimath
Correct the incorrect initialization of adapter timeout not to be in milliseconds, as it needs to be done in jiffies. Signed-off-by: Virupax Sadashivpetimath <virupax.sadashivpetimath@stericsson.com> Reviewed-by: Srinidhi Kasagar <srinidhi.kasagar@stericsson.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2011-05-25i2c-nomadik: remove the redundant error messagesrinidhi kasagar
The abort cause string itself is an error, so remove the redundant explicit error message. Signed-off-by: Srinidhi Kasagar <srinidhi.kasagar@stericsson.com> Reviewed-by: Jonas Aberg <jonas.aberg@stericsson.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2011-05-25i2c-nomadik: corrrect returned error numbersVirupax Sadashivpetimath
The code was returning bad error numbers or just -1 in some cases. Signed-off-by: Virupax Sadashivpetimath <virupax.sadashivpetimath@stericsson.com> Reviewed-by: Srinidhi Kasagar <srinidhi.kasagar@stericsson.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2011-05-25i2c-nomadik: make i2c timeout specific per i2c busVirupax Sadashivpetimath
Add option to have different i2c timeout delay for different i2c buses specified in platform data. Default to the old value unless specified. Signed-off-by: Virupax Sadashivpetimath <virupax.sadashivpetimath@stericsson.com> Reviewed-by: Srinidhi Kasagar <srinidhi.kasagar@stericsson.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2011-05-25i2c-nomadik: add regulator supportJonas Aberg
This on-chip I2C controller needs to fetch the regulator representing its voltage domain so that it won't be switched off. Signed-off-by: Jonas Aberg <jonas.aberg@stericsson.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2011-05-24i2c-parport: Various cleanupsJean Delvare
* Fix white space. * Rename labels to something meaningful. * Prefix defines with PORT_ to avoid collision with macros from <linux/parport.h>. * Add const markers where possible. Signed-off-by: Jean Delvare <khali@linux-fr.org>
2011-05-24i2c-i801: Don't depend on other kernel driver config optionsJean Delvare
Don't let other driver config options influence us, as it makes the code more complex and fragile for a small benefit. There's nothing wrong with instantiating I2C devices even if they don't have a driver. And we're talking about 835 extra bytes in the binary on x86-64, that's hardly worth arguing about. Signed-off-by: Jean Delvare <khali@linux-fr.org> Cc: David Woodhouse <david.woodhouse@intel.com> Cc: Hans de Goede <hdegoede@redhat.com>
generated by cgit v1.2.3 (git 2.39.1) at 2024-07-01 15:15:15 +0000