summaryrefslogtreecommitdiff
path: root/drivers/idle
AgeCommit message (Collapse)Author
2010-12-02intel_idle: recognize ARAT on WSM-EXLen Brown
We erroneously ignored the Always Running APIC Timer on WSM-EX. Move the check for ARAT down so that it can apply to any/all models. Signed-off-by: Len Brown <len.brown@intel.com>
2010-10-26Merge branch 'idle-release' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux-idle-2.6 * 'idle-release' of git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux-idle-2.6: intel_idle: do not use the LAPIC timer for ATOM C2 intel_idle: add initial Sandy Bridge support acpi_idle: delete bogus data from cpuidle_state.power_usage intel_idle: delete bogus data from cpuidle_state.power_usage intel_idle: simplify test for leave_mm()
2010-10-26intel_idle: do not use the LAPIC timer for ATOM C2Len Brown
If we use the LAPIC timer during ATOM C2 on some nvidia chisets, the system stalls. https://bugzilla.kernel.org/show_bug.cgi?id=21032 Signed-off-by: Len Brown <len.brown@intel.com>
2010-10-23Merge branch 'intel_idle+snb' into idle-releaseLen Brown
Signed-off-by: Len Brown <len.brown@intel.com>
2010-10-23intel_idle: add initial Sandy Bridge supportLen Brown
Signed-off-by: Len Brown <len.brown@intel.com>
2010-10-22Merge branch 'llseek' of git://git.kernel.org/pub/scm/linux/kernel/git/arnd/bklLinus Torvalds
* 'llseek' of git://git.kernel.org/pub/scm/linux/kernel/git/arnd/bkl: vfs: make no_llseek the default vfs: don't use BKL in default_llseek llseek: automatically add .llseek fop libfs: use generic_file_llseek for simple_attr mac80211: disallow seeks in minstrel debug code lirc: make chardev nonseekable viotape: use noop_llseek raw: use explicit llseek file operations ibmasmfs: use generic_file_llseek spufs: use llseek in all file operations arm/omap: use generic_file_llseek in iommu_debug lkdtm: use generic_file_llseek in debugfs net/wireless: use generic_file_llseek in debugfs drm: use noop_llseek
2010-10-21Merge branch 'x86-idle-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip * 'x86-idle-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: x86, hotplug: In the MWAIT case of play_dead, CLFLUSH the cache line x86, hotplug: Move WBINVD back outside the play_dead loop x86, hotplug: Use mwait to offline a processor, fix the legacy case x86, mwait: Move mwait constants to a common header file
2010-10-15intel_idle: delete bogus data from cpuidle_state.power_usageLen Brown
The mW data in this field is a total fabrication and serves no purpose other than to mislead those who might see it in sysfs. Delete it. Signed-off-by: Len Brown <len.brown@intel.com>
2010-10-15intel_idle: simplify test for leave_mm()Len Brown
A run-time test to invoke leave_mm() for the deepest supported C-state is redundant, since the appropriate C-states already have flags with CPUIDLE_FLAG_TLB_FLUSHED set. Signed-off-by: Len Brown <len.brown@intel.com>
2010-10-15llseek: automatically add .llseek fopArnd Bergmann
All file_operations should get a .llseek operation so we can make nonseekable_open the default for future file operations without a .llseek pointer. The three cases that we can automatically detect are no_llseek, seq_lseek and default_llseek. For cases where we can we can automatically prove that the file offset is always ignored, we use noop_llseek, which maintains the current behavior of not returning an error from a seek. New drivers should normally not use noop_llseek but instead use no_llseek and call nonseekable_open at open time. Existing drivers can be converted to do the same when the maintainer knows for certain that no user code relies on calling seek on the device file. The generated code is often incorrectly indented and right now contains comments that clarify for each added line why a specific variant was chosen. In the version that gets submitted upstream, the comments will be gone and I will manually fix the indentation, because there does not seem to be a way to do that using coccinelle. Some amount of new code is currently sitting in linux-next that should get the same modifications, which I will do at the end of the merge window. Many thanks to Julia Lawall for helping me learn to write a semantic patch that does all this. ===== begin semantic patch ===== // This adds an llseek= method to all file operations, // as a preparation for making no_llseek the default. // // The rules are // - use no_llseek explicitly if we do nonseekable_open // - use seq_lseek for sequential files // - use default_llseek if we know we access f_pos // - use noop_llseek if we know we don't access f_pos, // but we still want to allow users to call lseek // @ open1 exists @ identifier nested_open; @@ nested_open(...) { <+... nonseekable_open(...) ...+> } @ open exists@ identifier open_f; identifier i, f; identifier open1.nested_open; @@ int open_f(struct inode *i, struct file *f) { <+... ( nonseekable_open(...) | nested_open(...) ) ...+> } @ read disable optional_qualifier exists @ identifier read_f; identifier f, p, s, off; type ssize_t, size_t, loff_t; expression E; identifier func; @@ ssize_t read_f(struct file *f, char *p, size_t s, loff_t *off) { <+... ( *off = E | *off += E | func(..., off, ...) | E = *off ) ...+> } @ read_no_fpos disable optional_qualifier exists @ identifier read_f; identifier f, p, s, off; type ssize_t, size_t, loff_t; @@ ssize_t read_f(struct file *f, char *p, size_t s, loff_t *off) { ... when != off } @ write @ identifier write_f; identifier f, p, s, off; type ssize_t, size_t, loff_t; expression E; identifier func; @@ ssize_t write_f(struct file *f, const char *p, size_t s, loff_t *off) { <+... ( *off = E | *off += E | func(..., off, ...) | E = *off ) ...+> } @ write_no_fpos @ identifier write_f; identifier f, p, s, off; type ssize_t, size_t, loff_t; @@ ssize_t write_f(struct file *f, const char *p, size_t s, loff_t *off) { ... when != off } @ fops0 @ identifier fops; @@ struct file_operations fops = { ... }; @ has_llseek depends on fops0 @ identifier fops0.fops; identifier llseek_f; @@ struct file_operations fops = { ... .llseek = llseek_f, ... }; @ has_read depends on fops0 @ identifier fops0.fops; identifier read_f; @@ struct file_operations fops = { ... .read = read_f, ... }; @ has_write depends on fops0 @ identifier fops0.fops; identifier write_f; @@ struct file_operations fops = { ... .write = write_f, ... }; @ has_open depends on fops0 @ identifier fops0.fops; identifier open_f; @@ struct file_operations fops = { ... .open = open_f, ... }; // use no_llseek if we call nonseekable_open //////////////////////////////////////////// @ nonseekable1 depends on !has_llseek && has_open @ identifier fops0.fops; identifier nso ~= "nonseekable_open"; @@ struct file_operations fops = { ... .open = nso, ... +.llseek = no_llseek, /* nonseekable */ }; @ nonseekable2 depends on !has_llseek @ identifier fops0.fops; identifier open.open_f; @@ struct file_operations fops = { ... .open = open_f, ... +.llseek = no_llseek, /* open uses nonseekable */ }; // use seq_lseek for sequential files ///////////////////////////////////// @ seq depends on !has_llseek @ identifier fops0.fops; identifier sr ~= "seq_read"; @@ struct file_operations fops = { ... .read = sr, ... +.llseek = seq_lseek, /* we have seq_read */ }; // use default_llseek if there is a readdir /////////////////////////////////////////// @ fops1 depends on !has_llseek && !nonseekable1 && !nonseekable2 && !seq @ identifier fops0.fops; identifier readdir_e; @@ // any other fop is used that changes pos struct file_operations fops = { ... .readdir = readdir_e, ... +.llseek = default_llseek, /* readdir is present */ }; // use default_llseek if at least one of read/write touches f_pos ///////////////////////////////////////////////////////////////// @ fops2 depends on !fops1 && !has_llseek && !nonseekable1 && !nonseekable2 && !seq @ identifier fops0.fops; identifier read.read_f; @@ // read fops use offset struct file_operations fops = { ... .read = read_f, ... +.llseek = default_llseek, /* read accesses f_pos */ }; @ fops3 depends on !fops1 && !fops2 && !has_llseek && !nonseekable1 && !nonseekable2 && !seq @ identifier fops0.fops; identifier write.write_f; @@ // write fops use offset struct file_operations fops = { ... .write = write_f, ... + .llseek = default_llseek, /* write accesses f_pos */ }; // Use noop_llseek if neither read nor write accesses f_pos /////////////////////////////////////////////////////////// @ fops4 depends on !fops1 && !fops2 && !fops3 && !has_llseek && !nonseekable1 && !nonseekable2 && !seq @ identifier fops0.fops; identifier read_no_fpos.read_f; identifier write_no_fpos.write_f; @@ // write fops use offset struct file_operations fops = { ... .write = write_f, .read = read_f, ... +.llseek = noop_llseek, /* read and write both use no f_pos */ }; @ depends on has_write && !has_read && !fops1 && !fops2 && !has_llseek && !nonseekable1 && !nonseekable2 && !seq @ identifier fops0.fops; identifier write_no_fpos.write_f; @@ struct file_operations fops = { ... .write = write_f, ... +.llseek = noop_llseek, /* write uses no f_pos */ }; @ depends on has_read && !has_write && !fops1 && !fops2 && !has_llseek && !nonseekable1 && !nonseekable2 && !seq @ identifier fops0.fops; identifier read_no_fpos.read_f; @@ struct file_operations fops = { ... .read = read_f, ... +.llseek = noop_llseek, /* read uses no f_pos */ }; @ depends on !has_read && !has_write && !fops1 && !fops2 && !has_llseek && !nonseekable1 && !nonseekable2 && !seq @ identifier fops0.fops; @@ struct file_operations fops = { ... +.llseek = noop_llseek, /* no read or write fn */ }; ===== End semantic patch ===== Signed-off-by: Arnd Bergmann <arnd@arndb.de> Cc: Julia Lawall <julia@diku.dk> Cc: Christoph Hellwig <hch@infradead.org>
2010-10-08intel_idle: enable Atom C6Len Brown
ATM-C6 was commented out, pending public documentation. https://bugzilla.kernel.org/show_bug.cgi?id=19762 Tested-by: Dennis Jansen <Dennis.Jansen@...> Signed-off-by: Len Brown <len.brown@intel.com>
2010-09-30intel_idle: Voluntary leave_mm before entering deeperSuresh Siddha
Avoid TLB flush IPIs for the cores in deeper c-states by voluntary leave_mm() before entering into that state. CPUs tend to flush TLB in those c-states anyways. acpi_idle does this with C3-type states, but it was not caried over when intel_idle was introduced. intel_idle can apply it to C-states in addition to those that ACPI might export as C3... Signed-off-by: Suresh Siddha <suresh.b.siddha@intel.com> Signed-off-by: Len Brown <len.brown@intel.com>
2010-09-28intel_idle: add missing __percpu markupNamhyung Kim
intel_idle_cpuidle_devices is a percpu pointer but was missing __percpu markup. Signed-off-by: Namhyung Kim <namhyung@gmail.com> Acked-by: Tejun Heo <tj@kernel.org> Signed-off-by: Len Brown <len.brown@intel.com>
2010-09-28intel_idle: Change mode 755 => 644Thomas Weber
Remove execution permission from source file. Signed-off-by: Thomas Weber <weber@corscience.de> Signed-off-by: Len Brown <len.brown@intel.com>
2010-09-17x86, mwait: Move mwait constants to a common header fileH. Peter Anvin
We have MWAIT constants spread across three different .c files, for no good reason. Move them all into a common header file. Signed-off-by: H. Peter Anvin <hpa@linux.intel.com> Reviewed-by: Arjan van de Ven <arjan@linux.intel.com> Cc: Len Brown <lenb@kernel.org> LKML-Reference: <tip-*@git.kernel.org>
2010-08-15Merge branch 'idle-release' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux-idle-2.6 * 'idle-release' of git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux-idle-2.6: intel_idle: recognize Lincroft Atom Processor intel_idle: no longer EXPERIMENTAL intel_idle: disable module support intel_idle: add support for Westmere-EX intel_idle: delete power_policy modparam, and choose substate functions intel_idle: delete substates DEBUG modparam
2010-08-14intel_idle: recognize Lincroft Atom ProcessorArjan van de Ven
Signed-off-by: Arjan van de Ven <arjan@linux.intel.com> Signed-off-by: Len Brown <len.brown@intel.com>
2010-08-14intel_idle: no longer EXPERIMENTALLen Brown
This is a fully supported driver. Signed-off-by: Len Brown <len.brown@intel.com>
2010-08-14intel_idle: disable module supportLen Brown
Right now the module capability is cauing more trouble than it is worth. At least one distro built intel_idle as a module where it lost the init race with ACPI, making it useless. Make intel_idle bool so that if you select it, you will use it. We can restore module capability after cpuidle is enhanced to handle run-time changing of idle drivers. Signed-off-by: Len Brown <len.brown@intel.com>
2010-08-04Merge branch 'next' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/davej/cpufreq * 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/davej/cpufreq: [CPUFREQ] Remove pointless printk from p4-clockmod. [CPUFREQ] Fix section mismatch for powernow_cpu_init in powernow-k7.c [CPUFREQ] Fix section mismatch for longhaul_cpu_init. [CPUFREQ] Fix section mismatch for longrun_cpu_init. [CPUFREQ] powernow-k8: Fix misleading variable naming [CPUFREQ] Convert pci_table entries to PCI_VDEVICE (if PCI_ANY_ID is used) [CPUFREQ] arch/x86/kernel/cpu/cpufreq: use for_each_pci_dev() [CPUFREQ] fix brace coding style issue. [CPUFREQ] x86 cpufreq: Make trace_power_frequency cpufreq driver independent [CPUFREQ] acpi-cpufreq: Fix CPU_ANY CPUFREQ_{PRE,POST}CHANGE notification [CPUFREQ] ondemand: don't synchronize sample rate unless multiple cpus present [CPUFREQ] unexport (un)lock_policy_rwsem* functions [CPUFREQ] ondemand: Refactor frequency increase code [CPUFREQ] powernow-k8: On load failure, remind the user to enable support in BIOS setup [CPUFREQ] powernow-k8: Limit Pstate transition latency check [CPUFREQ] Fix PCC driver error path [CPUFREQ] fix double freeing in error path of pcc-cpufreq [CPUFREQ] pcc driver should check for pcch method before calling _OSC [CPUFREQ] fix memory leak in cpufreq_add_dev [CPUFREQ] revert "[CPUFREQ] remove rwsem lock from CPUFREQ_GOV_STOP call (second call site)" Manually fix up non-data merge conflict introduced by new calling conventions for trace_power_start() in commit 6f4f2723d085 ("x86 cpufreq: Make trace_power_frequency cpufreq driver independent"), which didn't update the intel_idle native hardware cpuidle driver.
2010-07-26intel_idle: add support for Westmere-EXLen Brown
Signed-off-by: Len Brown <len.brown@intel.com>
2010-07-23intel_idle: delete power_policy modparam, and choose substate functionsLen Brown
The idea behind power policy was that it would start off as a modparam, and then hook into the new "global" in-kernel power vs energy tunable. But that tunable isn't happening, so delete the hook here. With the policy hook gone, the sub-state choice functions do not do anything useful, so delete them from the critical path. To handle sub-states in the future, we will advertise them with dedicated cpuidle_state entries. That is necessary because some of the sub-states will have substantially different properties than their peer sub-states. Signed-off-by: Len Brown <len.brown@intel.com>
2010-07-23intel_idle: delete substates DEBUG modparamLen Brown
it isn't useful anymore Signed-off-by: Len Brown <len.brown@intel.com>
2010-05-28intel_idle: native hardware cpuidle driver for latest Intel processorsLen Brown
This EXPERIMENTAL driver supersedes acpi_idle on Intel Atom Processors, Intel Core i3/i5/i7 Processors and associated Intel Xeon processors. It does not support the Intel Core2 processor or earlier. For kernels configured with ACPI, CONFIG_INTEL_IDLE=y allows intel_idle to probe before the ACPI processor driver. Booting with "intel_idle.max_cstate=0" disables intel_idle and the system will fall back on ACPI's "acpi_idle". Typical Linux distributions load ACPI processor module early, making CONFIG_INTEL_IDLE=m not easily useful on ACPI platforms. intel_idle probes all processors at module_init time. Processors that are hot-added later will be limited to using C1 in idle. Signed-off-by: Len Brown <len.brown@intel.com>
2010-03-30include cleanup: Update gfp.h and slab.h includes to prepare for breaking ↵Tejun Heo
implicit slab.h inclusion from percpu.h percpu.h is included by sched.h and module.h and thus ends up being included when building most .c files. percpu.h includes slab.h which in turn includes gfp.h making everything defined by the two files universally available and complicating inclusion dependencies. percpu.h -> slab.h dependency is about to be removed. Prepare for this change by updating users of gfp and slab facilities include those headers directly instead of assuming availability. As this conversion needs to touch large number of source files, the following script is used as the basis of conversion. http://userweb.kernel.org/~tj/misc/slabh-sweep.py The script does the followings. * Scan files for gfp and slab usages and update includes such that only the necessary includes are there. ie. if only gfp is used, gfp.h, if slab is used, slab.h. * When the script inserts a new include, it looks at the include blocks and try to put the new include such that its order conforms to its surrounding. It's put in the include block which contains core kernel includes, in the same order that the rest are ordered - alphabetical, Christmas tree, rev-Xmas-tree or at the end if there doesn't seem to be any matching order. * If the script can't find a place to put a new include (mostly because the file doesn't have fitting include block), it prints out an error message indicating which .h file needs to be added to the file. The conversion was done in the following steps. 1. The initial automatic conversion of all .c files updated slightly over 4000 files, deleting around 700 includes and adding ~480 gfp.h and ~3000 slab.h inclusions. The script emitted errors for ~400 files. 2. Each error was manually checked. Some didn't need the inclusion, some needed manual addition while adding it to implementation .h or embedding .c file was more appropriate for others. This step added inclusions to around 150 files. 3. The script was run again and the output was compared to the edits from #2 to make sure no file was left behind. 4. Several build tests were done and a couple of problems were fixed. e.g. lib/decompress_*.c used malloc/free() wrappers around slab APIs requiring slab.h to be added manually. 5. The script was run on all .h files but without automatically editing them as sprinkling gfp.h and slab.h inclusions around .h files could easily lead to inclusion dependency hell. Most gfp.h inclusion directives were ignored as stuff from gfp.h was usually wildly available and often used in preprocessor macros. Each slab.h inclusion directive was examined and added manually as necessary. 6. percpu.h was updated not to include slab.h. 7. Build test were done on the following configurations and failures were fixed. CONFIG_GCOV_KERNEL was turned off for all tests (as my distributed build env didn't work with gcov compiles) and a few more options had to be turned off depending on archs to make things build (like ipr on powerpc/64 which failed due to missing writeq). * x86 and x86_64 UP and SMP allmodconfig and a custom test config. * powerpc and powerpc64 SMP allmodconfig * sparc and sparc64 SMP allmodconfig * ia64 SMP allmodconfig * s390 SMP allmodconfig * alpha SMP allmodconfig * um on x86_64 SMP allmodconfig 8. percpu.h modifications were reverted so that it could be applied as a separate patch and serve as bisection point. Given the fact that I had only a couple of failures from tests on step 6, I'm fairly confident about the coverage of this conversion patch. If there is a breakage, it's likely to be something in one of the arch headers which should be easily discoverable easily on most builds of the specific arch. Signed-off-by: Tejun Heo <tj@kernel.org> Guess-its-ok-by: Christoph Lameter <cl@linux-foundation.org> Cc: Ingo Molnar <mingo@redhat.com> Cc: Lee Schermerhorn <Lee.Schermerhorn@hp.com>
2009-12-17cpumask: convert drivers/idle/i7300_idle.c to cpumask_var_tRusty Russell
Fairly simple transformation: 1) cpumask_t -> cpumask_var_t and alloc_cpumask_var/free_cpumask_var (which are a NOOP unless CONFIG_CPUMASK_OFFSTACK=y). 2) cpu_set -> cpumask_set_cpu 3) cpus_weight -> cpumask_weight 4) cpu_clear -> cpumask_clear_cpu Signed-off-by: Rusty Russell <rusty@rustcorp.com.au> To: Andy Henroid <andrew.d.henroid@intel.com>
2009-09-08ioat: switch watchdog and reset handler from workqueue to timerDan Williams
In order to support dynamic resizing of the descriptor ring or polling for a descriptor in the presence of a hung channel the reset handler needs to make progress while in a non-preemptible context. The current workqueue implementation precludes polling channel reset completion under spin_lock(). This conversion also allows us to return to opportunistic cleanup in the ioat2 case as the timer implementation guarantees at least one cleanup after every descriptor is submitted. This means the worst case completion latency becomes the timer frequency (for exceptional circumstances), but with the benefit of avoiding busy waiting when the lock is contended. Signed-off-by: Maciej Sosnowski <maciej.sosnowski@intel.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2009-07-28ioat: move to drivers/dma/ioat/Dan Williams
When first created the ioat driver was the only inhabitant of drivers/dma/. Now, it is the only multi-file (more than a .c and a .h) driver in the directory. Moving it to an ioat/ subdirectory allows the naming convention to be cleaned up, and allows for future splitting of the source files by hardware version (v1, v2, and v3). Signed-off-by: Maciej Sosnowski <maciej.sosnowski@intel.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2009-05-28i7300_idle: allow testing on i5000-series hardware w/o re-compileLen Brown
Testing the i7300_idle driver on i5000-series hardware required an edit to i7300_idle.h to "#define SUPPORT_I5000 1" and a re-build of both i7300_idle and ioat_dma. Replace that build-time scheme with a load-time module parameter: "7300_idle.forceload=1" to make it easier to test the driver on hardware that while not officially validated, works fine and is much more commonly available. By default (no modparam) the driver will continue to load only on the i7300. Note that ioat_dma runs a copy of i7300_idle's probe routine to know to reserve an IOAT channel for i7300_idle. This change makes ioat_dma do that always on the i5000, just like it does on the i7300. Signed-off-by: Len Brown <len.brown@intel.com> Acked-by: Andrew Henroid <andrew.d.henroid@intel.com>
2009-04-07dma-mapping: replace all DMA_64BIT_MASK macro with DMA_BIT_MASK(64)Yang Hongyang
Replace all DMA_64BIT_MASK macro with DMA_BIT_MASK(64) Signed-off-by: Yang Hongyang<yanghy@cn.fujitsu.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-01-06i7300_idle: struct device - replace bus_id with dev_name(), dev_set_name()Kay Sievers
CC: Andy Henroid <andrew.d.henroid@intel.com> Signed-off-by: Kay Sievers <kay.sievers@vrfy.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-10-28i7300_idle: Kconfig, show menu only on x86_64Venki Pallipadi
...since today it contains only a single driver which is visible to just x86_64 Signed-off-by: Venkatesh Pallipadi <venkatesh.pallipadi@intel.com> Signed-off-by: Len Brown <len.brown@intel.com>
2008-10-24i7300_idle: Cleanup based review commentsVenki Pallipadi
Cleanup of i7300 idle driver based on review comments from Randy Dunlap, Andi Kleen and Len Brown. Signed-off-by: Venkatesh Pallipadi <venkatesh.pallipadi@intel.com> Signed-off-by: Len Brown <len.brown@intel.com>
2008-10-24i7300_idle: Disable ioat channel only on platforms where ile driver can loadVenki Pallipadi
Based on input from Andi Kleen: share the platform detection code with ioat_dma and disable the channel in dma engine only for specific platforms. Signed-off-by: Venkatesh Pallipadi <venkatesh.pallipadi@intel.com> Signed-off-by: Len Brown <len.brown@intel.com>
2008-10-21i7300_idle driver v1.55Andy Henroid
The Intel 7300 Memory Controller supports dynamic throttling of memory which can be used to save power when system is idle. This driver does the memory throttling when all CPUs are idle on such a system. Refer to "Intel 7300 Memory Controller Hub (MCH)" datasheet for the config space description. Signed-off-by: Andy Henroid <andrew.d.henroid@intel.com> Signed-off-by: Len Brown <len.brown@intel.com> Signed-off-by: Venkatesh Pallipadi <venkatesh.pallipadi@intel.com>