summaryrefslogtreecommitdiff
path: root/drivers/input
AgeCommit message (Collapse)Author
2011-03-16Input: tsc2005 - set up bus type in input deviceDmitry Torokhov
We know what bus we are residing on (SPI) so let's make this data available to the users. Tested-by: Aaro Koskinen <aaro.koskinen@nokia.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2011-03-16Input: tsc2005 - set up parent deviceDmitry Torokhov
Set up SPI device as parent of the input device so it gets placed into proper place in sysfs tree. Tested-by: Aaro Koskinen <aaro.koskinen@nokia.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2011-03-16Input: tsc2005 - clear driver data after unbindingDmitry Torokhov
We should not leave garbage pointers in driver structure after we unbind it from the device or if bind fails. Tested-by: Aaro Koskinen <aaro.koskinen@nokia.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2011-03-16Input: tsc2005 - add module descriptionDmitry Torokhov
Add proper module description so that it would show in 'modinfo' output. Tested-by: Aaro Koskinen <aaro.koskinen@nokia.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2011-03-16Input: tsc2005 - remove driver banner messageDmitry Torokhov
The boot process is noisy as it is and input core already announces all new device so let's get rid of the banner message in the driver. Tested-by: Aaro Koskinen <aaro.koskinen@nokia.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2011-03-16Input: tsc2005 - remove incorrect module aliasDmitry Torokhov
TSC2005 is not a platform driver so it should not define "platform:tsc2005" module alias. Tested-by: Aaro Koskinen <aaro.koskinen@nokia.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2011-03-16Input: tsc2005 - convert to using dev_pm_opsDmitry Torokhov
Newer code should not be using legacy suspend/resume methods but rather supply dev_pm_ops structure as it allows better control over power management. Tested-by: Aaro Koskinen <aaro.koskinen@nokia.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2011-03-16Input: tsc2005 - use spi_get/set_drvdata()Dmitry Torokhov
Instead of peeking into underlying device and using dev_get/set_drvdata(), let's use SPI layer's implementation to access driver-private data (which may be different from driver-core private data). Tested-by: Aaro Koskinen <aaro.koskinen@nokia.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2011-03-16Input: introduce tsc2005 driverLauri Leukkunen
Discussions: http://www.mail-archive.com/linux-omap@vger.kernel.org/msg26748.html Introduce a driver for the Texas Instruments TSC2005 touchscreen controller (http://focus.ti.com/docs/prod/folders/print/tsc2005.html). The patch is based on a driver by Lauri Leukkunen, with modifications by David Brownell, Phil Carmody, Imre Deak, Hiroshi DOYU, Ari Kauppi, Tony Lindgren, Jarkko Nikula, Eero Nurkkala and Roman Tereshonkov. Signed-off-by: Lauri Leukkunen <lauri.leukkunen@nokia.com> [aaro.koskinen@nokia.com: patch description, rebasing & cleanup] Signed-off-by: Aaro Koskinen <aaro.koskinen@nokia.com> [ext-srikar.1.bhavanarayana@nokia.com: various fixes] Signed-off-by: Srikar <ext-srikar.1.bhavanarayana@nokia.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2011-03-16Input: xen-kbdfront - move to drivers/input/miscDmitry Torokhov
drivers/input is reserved for input core code and input handlers with drivers belonging to one of the sub-directories. Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2011-03-16Input: xen-kbdfront - add grant reference for shared pageDaniel De Graaf
Without a grant reference, full access to the domain's memory is required to use the shared page. Add an additional parameter in xenstore to allow grant mapping to be used. Signed-off-by: Daniel De Graaf <dgdegra@tycho.nsa.gov> Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Acked-by: Ian Campbell <Ian.Campbell@eu.citrix.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2011-03-16Input: xen-kbdfront - advertise either absolute or relative coordinatesOlaf Hering
A virtualized display device is usually viewed with the vncviewer application, either by 'xm vnc domU' or with vncviewer localhost:port. vncviewer and the RFB protocol provides absolute coordinates to the virtual display. These coordinates are either passed through to a PV guest or converted to relative coordinates for a HVM guest. A PV guest receives these coordinates and passes them to the kernels evdev driver. There it can be picked up by applications such as the xorg-input drivers. Using absolute coordinates avoids issues such as guest mouse pointer not tracking host mouse pointer due to wrong mouse acceleration settings in the guests X display. Advertise either absolute or relative coordinates to the input system and the evdev driver, depending on what dom0 provides. The xorg-input driver prefers relative coordinates even if a devices provides both. Signed-off-by: Olaf Hering <olaf@aepfle.de> Signed-off-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2011-03-17unicore32 io: redefine __REG(x) and re-use readl/writel funcsGuanXuetao
-- by advice of Arnd Bergmann Signed-off-by: Guan Xuetao <gxt@mprc.pku.edu.cn> Reviewed-by: Arnd Bergmann <arnd@arndb.de>
2011-03-17unicore32 i8042 upgrade and bugfix: adjust resource request region typeGuanXuetao
Signed-off-by: Guan Xuetao <gxt@mprc.pku.edu.cn>
2011-03-17unicore32 i8042: adjust io funcs of i8042-unicore32io.hGuanXuetao
replace inb/outb with readb/writeb in i8042-unicore32io.h and correct typecasting of register and region macros -- by advice with Arnd Bergmann Signed-off-by: Guan Xuetao <gxt@mprc.pku.edu.cn>
2011-03-17unicore32 machine related files: ps2 driverGuanXuetao
This patch implements arch-specific ps2 driver. By reviewed with Dmitry Torokhov: 1. move i8042-ucio.h to drivers/input/serio/i8042-unicore32io.h 2. move puv3_ps2_init() to arch/unicore32/kernel/puv3-core.c 3. remove unused comments. Signed-off-by: Guan Xuetao <gxt@mprc.pku.edu.cn> Acked-by: Dmitry Torokhov <dtor@mail.ru>
2011-03-16Merge branch 'devicetree/next' of git://git.secretlab.ca/git/linux-2.6Linus Torvalds
* 'devicetree/next' of git://git.secretlab.ca/git/linux-2.6: (21 commits) tty: serial: altera_jtaguart: Add device tree support tty: serial: altera_uart: Add devicetree support dt: eliminate of_platform_driver shim code dt: Eliminate of_platform_{,un}register_driver dt/serial: Eliminate users of of_platform_{,un}register_driver dt/usb: Eliminate users of of_platform_{,un}register_driver dt/video: Eliminate users of of_platform_{,un}register_driver dt/net: Eliminate users of of_platform_{,un}register_driver dt/sound: Eliminate users of of_platform_{,un}register_driver dt/spi: Eliminate users of of_platform_{,un}register_driver dt: uartlite: merge platform and of_platform driver bindings dt: xilinx_hwicap: merge platform and of_platform driver bindings ipmi: convert OF driver to platform driver leds/leds-gpio: merge platform_driver with of_platform_driver dt/sparc: Eliminate users of of_platform_{,un}register_driver dt/powerpc: Eliminate users of of_platform_{,un}register_driver dt/powerpc: move of_bus_type infrastructure to ibmebus drivercore/dt: add a match table pointer to struct device dt: Typo fix. altera_ps2: Add devicetree support ...
2011-03-16Merge branch 'for-2.6.39' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/wqLinus Torvalds
* 'for-2.6.39' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/wq: workqueue: fix build failure introduced by s/freezeable/freezable/ workqueue: add system_freezeable_wq rds/ib: use system_wq instead of rds_ib_fmr_wq net/9p: replace p9_poll_task with a work net/9p: use system_wq instead of p9_mux_wq xfs: convert to alloc_workqueue() reiserfs: make commit_wq use the default concurrency level ocfs2: use system_wq instead of ocfs2_quota_wq ext4: convert to alloc_workqueue() scsi/scsi_tgt_lib: scsi_tgtd isn't used in memory reclaim path scsi/be2iscsi,qla2xxx: convert to alloc_workqueue() misc/iwmc3200top: use system_wq instead of dedicated workqueues i2o: use alloc_workqueue() instead of create_workqueue() acpi: kacpi*_wq don't need WQ_MEM_RECLAIM fs/aio: aio_wq isn't used in memory reclaim path input/tps6507x-ts: use system_wq instead of dedicated workqueue cpufreq: use system_wq instead of dedicated workqueues wireless/ipw2x00: use system_wq instead of dedicated workqueues arm/omap: use system_wq in mailbox workqueue: use WQ_MEM_RECLAIM instead of WQ_RESCUER
2011-03-15Input: tc3589x-keypad - fix 'double const' warningDmitry Torokhov
Also rearrange driver structure initializer a bit. Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2011-03-15Input: tca6416-keypad - suspend/resume wakeup supportMagnus Damm
Extend the tca6416 driver to use enable_irq_wake() and disable_irq_wake() in the suspend/resume hooks. This makes it possible to wake up from suspend-to-ram using a tca6416 key on the sh7372 mackerel board. Signed-off-by: Magnus Damm <damm@opensource.se> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2011-03-14Input: atmel_mxt_ts - add objects of mXT1386 chipJoonyoung Shim
Atmel mXT1386 chip is operated by atmel_mxt_ts driver and it has some different objects. Signed-off-by: Joonyoung Shim <jy0922.shim@samsung.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2011-03-14Input: atmel_mxt_ts - remove firmware version checkJoonyoung Shim
Atmel touchscreen chips have different firmware version with each chip, so we cannot distinguish attribute of chip by firmware version. Signed-off-by: Joonyoung Shim <jy0922.shim@samsung.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2011-03-14Input: wm831x-ts - ensure the controller is in a known state on openMark Brown
Explicitly set all the enable bits when opening the device just in case something left the device in an unexpected state. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2011-03-13Input: add Atmel AT42QT1070 keypad driverBo Shen
The AT42QT1070 QTouch sensor supports up to 7 keys. The driver has been tested on Atmel AT91SAM9M10-G45-EK board, and it should work fine on other platforms. Signed-off-by: Bo Shen <voice.shen@atmel.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2011-03-12Input: wm831x-ts - default pressure measurements onMark Brown
tslib expects pressure measurements so enable them by default for better compatibility. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2011-03-12Input: bcm5974 - add support for MacBookPro8Andy Botting
This patch add multitouch support for the MacBookPro8,1 and MacBookPro8,2 models. Cc: stable@kernel.org Signed-off-by: Andy Botting <andy@andybotting.com> Signed-off-by: Henrik Rydberg <rydberg@euromail.se> Acked-by: Jiri Kosina <jkosina@suse.cz> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2011-03-12Input: wacom - support 2FGT in MT formatPing Cheng
Reviewed-by: Henrik Rydberg <rydberg@euromail.se> Reviewed-by: Chris Bagwell <chris@cnpbagwell.com> Signed-off-by: Ping Cheng <pingc@wacom.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2011-03-12Input: wacom - support one finger touch the touchscreen wayPing Cheng
There are two types of 1FGT devices supported in wacom_wac.c. Changing them to follow the existing touchscreen format, i.e., only report BTN_TOUCH as a valid tool type. Touch data will be ignored if pen is in proximity. This requires a touch up event sent if touch was down when pen comes in. The touch up event should be sent before any pen events are emitted. Otherwise, two pointers would race for the cursor. However, we can not send a touch up inside wacom_tpc_pen since pen and touch are on different logical port. That is why we have to check if touch is up before sending pen events. Reviewed-by: Henrik Rydberg <rydberg@euromail.se> Reviewed-by: Chris Bagwell <chris@cnpbagwell.com> Signed-off-by: Ping Cheng <pingc@wacom.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2011-03-12Input: wacom - process pen data in its own routinePing Cheng
So it would be easier for patch reviewers to follow the data path. Reviewed-by: Henrik Rydberg <rydberg@euromail.se> Reviewed-by: Chris Bagwell <chris@cnpbagwell.com> Signed-off-by: Ping Cheng <pingc@wacom.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2011-03-12Input: wacom - do not send 2FGT Tablet PC events in TAP formatPing Cheng
2FGT Tablet PC touch events were processed in _TAP_ format. Remove them so we can change to _MT_ format. Signed-off-by: Ping Cheng <pingc@wacom.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2011-02-28dt: Eliminate of_platform_{,un}register_driverGrant Likely
Final step to eliminate of_platform_bus_type. They're all just platform drivers now. v2: fix type in pasemi_nand.c (thanks to Stephen Rothwell) Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2011-02-28dt/sparc: Eliminate users of of_platform_{,un}register_driverGrant Likely
Get rid of old users of of_platform_driver in arch/sparc. Most of_platform_driver users can be converted to use the platform_bus directly. Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2011-02-28Merge commit 'v2.6.38-rc6' into devicetree/nextGrant Likely
Conflicts: drivers/spi/pxa2xx_spi_pci.c
2011-02-27Input: evdev - fix evdev_write return value on partial writesPeter Korsgaard
As was recently brought up on the busybox list (http://lists.busybox.net/pipermail/busybox/2011-January/074565.html), evdev_write doesn't properly check the count argument, which will lead to a return value > count on partial writes if the remaining bytes are accessible - causing userspace confusion. Fix it by only handling each full input_event structure and return -EINVAL if less than 1 struct was written, similar to how it is done in evdev_read. Reported-by: Baruch Siach <baruch@tkos.co.il> Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk> Acked-by: Henrik Rydberg <rydberg@euromail.se> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2011-02-27Input: bcm5974 - Report button also for zero fingersHenrik Rydberg
With the current code, pressing the integrated button with an isolating tool does not result in any button report. Fixed with this this patch. Signed-off-by: Henrik Rydberg <rydberg@euromail.se> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2011-02-25Input: atmel_mxt_ts - remove matrix size checkIiro Valkonen
The mxt_check_matrix_size() is currently setting the CTE mode to match xline/yline information that is in the platform data, but it does not take into account for example the fact that we could have a key array in use too (key array would use some x/y lines as well). It would be better to simply rely on the configuration data, and make sure that the CTE mode set in there matches the touch object (touchscreen, key array, proximity) configuration (which are set in the config data too). Signed-off-by: Iiro Valkonen <iiro.valkonen@atmel.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2011-02-23Input: mcs_touchkey - add shutdown handlerHeungJun Kim
The MCS50XX series has a HW bug that requires explicit chip power down. If chip is not powered down before shutting the system down the control pins (powerup, interrupt) are pulled up and residue current continues flowing into the chips making them continue consuming power. Signed-off-by: Heungjun Kim <riverful.kim@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2011-02-23Input: mcs_touchkey - add support for suspend/resumeHeungjun Kim
This adds support for system-level suspend/resume to the driver. Signed-off-by: Heungjun Kim <riverful.kim@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2011-02-23Input: omap4-keypad - wire up runtime PM handlingAbraham Arce
Enable Runtime PM functionality in OMAP4 driver based on the following assumptions: - keyboard controller in wakeup domain so it is always on and power impact is minimal; - in OMAP4 the device control is at module/device level and ick/fclk level control is difficult so cutting of clocks will prevent interrupts. Signed-off-by: Abraham Arce <x0066660@ti.com> Signed-off-by: Shubhrajyoti D <shubhrajyoti@ti.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2011-02-23Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: Input: serio/gameport - use 'long' system workqueue Input: synaptics - document 0x0c query Input: tegra-kbc - add function keymap
2011-02-23Input: serio/gameport - use 'long' system workqueueDmitry Torokhov
Commit 8ee294cd9def0004887da7f44b80563493b0a097 converted serio subsystem event handling from using a dedicated thread to using common workqueue. Unfortunately, this regressed our boot times, due to the fact that serio jobs take long time to execute. While the new concurrency managed workqueue code manages long-playing works just fine and schedules additional workers as needed, such works wreck havoc among remaining users of flush_scheduled_work(). To solve this problem let's move serio/gameport works from system_wq to system_long_wq which nobody tries to flush. Reported-and-tested-by: Hernando Torque <pantherchen@versanet.de> Acked-by: Tejun Heo <tj@kernel.org> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2011-02-23Input: synaptics - document 0x0c queryDmitry Torokhov
Since Synaptics technical writers department is a bit slow releasing updated Synaptics interface guide, let's add some new bits (with their blessing) to the code so that they don't get lost. Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2011-02-23ARM: amba: make probe() functions take const id tablesRussell King
Make Primecell driver probe functions take a const pointer to their ID tables. Drivers should never modify their ID tables in their probe handler. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2011-02-21Input: uinput - reversed test in uinput_setup_device()Dan Carpenter
The test here is reversed. It should be if (IS_ERR()) instead of if (!IS_ERR()). Signed-off-by: Dan Carpenter <error27@gmail.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2011-02-21Input: atmel_mxt_ts - allow board code to specify IRQ flagsIiro Valkonen
Different board have different requirements/setups so let's be more flexible. Signed-off-by: Iiro Valkonen <iiro.valkonen@atmel.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2011-02-21Input: atmel_mxt_ts - allow board code to suppliy controller configIiro Valkonen
As there is no common configuration settings that would work in every situation, remove the fixed config data from driver code and add config data to platform data. Signed-off-by: Iiro Valkonen <iiro.valkonen@atmel.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2011-02-21Input: atmel_mxt_ts - add mXT224 identifier to id_tableChris Leech
"mXT224" is used in the Intel mid firmware in SFI tables to identify the presence of this I2C device. Signed-off-by: Chris Leech <christopher.leech@linux.intel.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2011-02-21Input: synaptics_i2c - convert to dev_pm_opsMark Brown
There is a general move to convert drivers to dev_pm_ops rather than bus specific PM ops in order to facilitate core development. Do this converison for synaptics-i2c. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2011-02-21Input: adxl34x - fix references to adx134xMark Brown
The adxl34x SPI driver has what appears to be a typo referring to the device as adx134x with the numeral 1 rather than letter l. This appears to be an error so convert. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Michael Hennerich <michael.hennerich@analog.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2011-02-21Input: adxl34x-spi - convert to dev_pm_opsMark Brown
There is a general move to convert drivers to use dev_pm_ops rather than bus specific ones in order to facilitate core development. Do this conversion for adxl34x-spi. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Michael Hennerich <michael.hennerich@analog.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
generated by cgit v1.2.3 (git 2.39.1) at 2024-10-11 21:35:47 +0000