summaryrefslogtreecommitdiff
path: root/drivers/mmc/host/dw_mmc.c
AgeCommit message (Collapse)Author
2012-02-13mmc: dw_mmc: Fix PIO mode with support of highmemSeungwon Jeon
Current PIO mode makes a kernel crash with CONFIG_HIGHMEM. Highmem pages have a NULL from sg_virt(sg). This patch fixes the following problem. Unable to handle kernel NULL pointer dereference at virtual address 00000000 pgd = c0004000 [00000000] *pgd=00000000 Internal error: Oops: 817 [#1] PREEMPT SMP Modules linked in: CPU: 0 Not tainted (3.0.15-01423-gdbf465f #589) PC is at dw_mci_pull_data32+0x4c/0x9c LR is at dw_mci_read_data_pio+0x54/0x1f0 pc : [<c0358824>] lr : [<c035988c>] psr: 20000193 sp : c0619d48 ip : c0619d70 fp : c0619d6c r10: 00000000 r9 : 00000002 r8 : 00001000 r7 : 00000200 r6 : 00000000 r5 : e1dd3100 r4 : 00000000 r3 : 65622023 r2 : 0000007f r1 : eeb96000 r0 : e1dd3100 Flags: nzCv IRQs off FIQs on Mode SVC_32 ISA ARM Segment xkernel Control: 10c5387d Table: 61e2004a DAC: 00000015 Process swapper (pid: 0, stack limit = 0xc06182f0) Stack: (0xc0619d48 to 0xc061a000) 9d40: e1dd3100 e1a4f000 00000000 e1dd3100 e1a4f000 00000200 9d60: c0619da4 c0619d70 c035988c c03587e4 c0619d9c e18158f4 e1dd3100 e1dd3100 9d80: 00000020 00000000 00000000 00000020 c06e8a84 00000000 c0619e04 c0619da8 9da0: c0359b24 c0359844 e18158f4 e1dd3164 e1dd3168 e1dd3150 3d02fc79 e1dd3154 9dc0: e1dd3178 00000000 00000020 00000000 e1dd3150 00000000 c10dd7e8 e1a84900 9de0: c061e7cc 00000000 00000000 0000008d c06e8a84 c061e780 c0619e4c c0619e08 9e00: c00c4738 c0359a34 3d02fc79 00000000 c0619e4c c05a1698 c05a1670 c05a165c 9e20: c04de8b0 c061e780 c061e7cc e1a84900 ffffed68 0000008d c0618000 00000000 9e40: c0619e6c c0619e50 c00c48b4 c00c46c8 c061e780 c00423ac c061e7cc ffffed68 9e60: c0619e8c c0619e70 c00c7358 c00c487c 0000008d ffffee38 c0618000 ffffed68 9e80: c0619ea4 c0619e90 c00c4258 c00c72b0 c00423ac ffffee38 c0619ecc c0619ea8 9ea0: c004241c c00c4234 ffffffff f8810000 0000006d 00000002 00000001 7fffffff 9ec0: c0619f44 c0619ed0 c0048bc0 c00423c4 220ae7a9 00000000 386f0d30 0005d3a4 9ee0: c00423ac c10dd0b8 c06f2cd8 c0618000 c0594778 c003a674 7fffffff c0619f44 9f00: 386f0d30 c0619f18 c00a6f94 c005be3c 80000013 ffffffff 386f0d30 0005d3a4 9f20: 386f0d30 0005d2d1 c10dd0a8 c10dd0b8 c06f2cd8 c0618000 c0619f74 c0619f48 9f40: c0345858 c005be00 c00a2440 c0618000 c0618000 c00410d8 c06c1944 c00410fc 9f60: c0594778 c003a674 c0619f9c c0619f78 c004a7e8 c03457b4 c0618000 c06c18f8 9f80: 00000000 c0039c70 c06c18d4 c003a674 c0619fb4 c0619fa0 c04ceafc c004a714 9fa0: c06287b4 c06c18f8 c0619ff4 c0619fb8 c0008b68 c04cea68 c0008578 00000000 9fc0: 00000000 c003a674 00000000 10c5387d c0628658 c003aa78 c062f1c4 4000406a 9fe0: 413fc090 00000000 00000000 c0619ff8 40008044 c0008858 00000000 00000000 Backtrace: [<c03587d8>] (dw_mci_pull_data32+0x0/0x9c) from [<c035988c>] (dw_mci_read_data_pio+0x54/0x1f0) r6:00000200 r5:e1a4f000 r4:e1dd3100 [<c0359838>] (dw_mci_read_data_pio+0x0/0x1f0) from [<c0359b24>] (dw_mci_interrupt+0xfc/0x4a4) [<c0359a28>] (dw_mci_interrupt+0x0/0x4a4) from [<c00c4738>] (handle_irq_event_percpu+0x7c/0x1b4) [<c00c46bc>] (handle_irq_event_percpu+0x0/0x1b4) from [<c00c48b4>] (handle_irq_event+0x44/0x64) [<c00c4870>] (handle_irq_event+0x0/0x64) from [<c00c7358>] (handle_fasteoi_irq+0xb4/0x124) r7:ffffed68 r6:c061e7cc r5:c00423ac r4:c061e780 [<c00c72a4>] (handle_fasteoi_irq+0x0/0x124) from [<c00c4258>] (generic_handle_irq+0x30/0x38) r7:ffffed68 r6:c0618000 r5:ffffee38 r4:0000008d [<c00c4228>] (generic_handle_irq+0x0/0x38) from [<c004241c>] (asm_do_IRQ+0x64/0xe0) r5:ffffee38 r4:c00423ac [<c00423b8>] (asm_do_IRQ+0x0/0xe0) from [<c0048bc0>] (__irq_svc+0x80/0x14c) Exception stack(0xc0619ed0 to 0xc0619f18) Signed-off-by: Seungwon Jeon <tgih.jun@samsung.com> Acked-by: Will Newton <will.newton@imgtec.com> Cc: stable <stable@vger.kernel.org> Signed-off-by: Chris Ball <cjb@laptop.org>
2012-01-12mmc: dw_mmc: miscaculated the fifo-depth with wrong bit operationJaehoon Chung
In FIFOTH register, the RX_WMark field (bits[27:16]) defaults to FIFO_DEPTH - 1. When reading it, bits[26:16] were being used, so fix it to use the mask 0xfff instead of 0x7ff. Signed-off-by: Jaehoon Chung <jh80.chung@samsung.com> Reviewed-by: James Hogan <james.hogan@imgtec.com> Signed-off-by: Chris Ball <cjb@laptop.org>
2012-01-12mmc: dw_mmc: Clear the DDR mode for non-DDRSeungwon Jeon
UHS_REG should be cleared for non-DDR mode. But currently there is no way to clear DDR mode, if it is already set once. This patch adds clearing DDR mode for non-DDR mode. Signed-off-by: Seungwon Jeon <tgih.jun@samsung.com> Acked-by: Will Newton <will.newton@imgtec.com> Signed-off-by: Chris Ball <cjb@laptop.org>
2012-01-11mmc: dw_mmc: Support predefined mutiple block transfersSeungwon Jeon
This patch adds the support for predefined multiple block r/w. dw_mmc can support MMC_CAP_CMD23 capability. Signed-off-by: Seungwon Jeon <tgih.jun@samsung.com> Acked-by: Will Newton <will.newton@imgtec.com> Signed-off-by: Chris Ball <cjb@laptop.org>
2012-01-11mmc: dw_mmc: Remove unnecessary else clausesChris Ball
Signed-off-by: Chris Ball <cjb@laptop.org>
2012-01-11mmc: dw_mmc: Add more capabilities fieldSeungwon Jeon
This patch adds another capabilities field for MMC_CAPS2_XXX. Signed-off-by: Seungwon Jeon <tgih.jun@samsung.com> Signed-off-by: Chris Ball <cjb@laptop.org>
2012-01-11mmc: dw_mmc: use dev_pm_ops for dw_mmc controllersJaehoon Chung
This patch modifies dw_mmc to use dev_pm_ops. Signed-off-by: Jaehoon Chung <jh80.chung@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Acked-by: James Hogan <james.hogan@imgtec.com> Signed-off-by: Chris Ball <cjb@laptop.org>
2011-10-26mmc: dw_mmc: modify DATA register offsetJaehoon Chung
In dw_mmc 2.40a spec, Data register's offset is changed. Before we used Data register offset 0x100. but if somebody uses a 2.40a controller, we must use 0x200 for Data register. This patch adds a version-id checking point and uses SDMMC_DATA(x) instead of SDMMC_DATA. It assumes 2.40a is the latest version. Signed-off-by: Jaehoon Chung <jh80.chung@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Acked-by: James Hogan <james.hogan@imgtec.com> Signed-off-by: Chris Ball <cjb@laptop.org>
2011-10-26mmc: replace printk with appropriate display macroGirish K S
All the files using printk function for displaying kernel messages in the mmc driver have been replaced with corresponding macro. Signed-off-by: Girish K S <girish.shivananjappa@linaro.org> Signed-off-by: Chris Ball <cjb@laptop.org>
2011-10-26mmc: dw_mmc: Support SDIO interrupts for all slotsShashidhar Hiremath
The Patch adds the support for SDIO interrupts for all slots. It includes enabling of SDIO interrupts through dw_mci_enable_sdio_irq and the handling of the slot specific interrupts in the Interrupt Service Routine. Signed-off-by: Shashidhar Hiremath <shashidharh@vayavyalabs.com> Acked-by: James Hogan <james.hogan@imgtec.com> Signed-off-by: Chris Ball <cjb@laptop.org>
2011-08-13mmc: dw_mmc: Fix DDR mode support.Seungwon Jeon
Host driver can't get a hint of DDR mode through ios->ddr flag anymore. ios->timing is currently used to inform DDR mode as a substitute. And capability of MMC_CAP_MMC_HIGHSPEED is added for DDR support. Signed-off-by: Seungwon Jeon <tgih.jun@samsung.com> Acked-by: Will Newton <will.newton@imgtec.com> Signed-off-by: Chris Ball <cjb@laptop.org>
2011-08-13mmc: dw_mmc: Fix mask in IDMAC_SET_BUFFER1_SIZE macroShashidhar Hiremath
The mask used inside this macro was assuming Buffer_Size1's [BS1's] width to be 14 bits, it is actually 13 bits. Modify masks used in IDMAC_SET_BUFFER1_SIZE such that they use only 13 bits instead of current 14. Signed-off-by: Shashidhar Hiremath <shashidharh@vayavyalabs.com> Acked-by: Will Newton <will.newton@imgtec.com> Signed-off-by: Chris Ball <cjb@laptop.org>
2011-07-25Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial: (43 commits) fs: Merge split strings treewide: fix potentially dangerous trailing ';' in #defined values/expressions uwb: Fix misspelling of neighbourhood in comment net, netfilter: Remove redundant goto in ebt_ulog_packet trivial: don't touch files that are removed in the staging tree lib/vsprintf: replace link to Draft by final RFC number doc: Kconfig: `to be' -> `be' doc: Kconfig: Typo: square -> squared doc: Konfig: Documentation/power/{pm => apm-acpi}.txt drivers/net: static should be at beginning of declaration drivers/media: static should be at beginning of declaration drivers/i2c: static should be at beginning of declaration XTENSA: static should be at beginning of declaration SH: static should be at beginning of declaration MIPS: static should be at beginning of declaration ARM: static should be at beginning of declaration rcu: treewide: Do not use rcu_read_lock_held when calling rcu_dereference_check Update my e-mail address PCIe ASPM: forcedly -> forcibly gma500: push through device driver tree ... Fix up trivial conflicts: - arch/arm/mach-ep93xx/dma-m2p.c (deleted) - drivers/gpio/gpio-ep93xx.c (renamed and context nearby) - drivers/net/r8169.c (just context changes)
2011-07-20mmc: dw_mmc: reset FIFO after an errorJames Hogan
If an error occurs mid way through a transaction (such as a missing CRC status response after the 2nd block written out of 3), then the FIFO may still contain data which will interfere with the next transaction. Therefore after an error has been detected, reset the fifo using the CTRL register. Signed-off-by: James Hogan <james.hogan@imgtec.com> Acked-by: Will Newton <will.newton@imgtec.com> Tested-by: Jaehoon Chung <jh80.chung@samsung.com> Signed-off-by: Chris Ball <cjb@laptop.org>
2011-07-20mmc: dw_mmc: handle "no CRC status" errorJames Hogan
When a data write isn't acknowledged by the card (so no CRC status token is detected after the data), the error -EIO is returned instead of the -ETIMEDOUT expected by mmc_test 15 - "Correct xfer_size at write (start failure)" and 17 "Correct xfer_size at write (midway failure)". In PIO mode the reported number of bytes transferred is also exaggerated since the last block actually failed. Handle the "Write no CRC" error specially, setting the error to -ETIMEDOUT and setting the bytes_xferred to 0. Signed-off-by: James Hogan <james.hogan@imgtec.com> Acked-by: Will Newton <will.newton@imgtec.com> Tested-by: Jaehoon Chung <jh80.chung@samsung.com> Signed-off-by: Chris Ball <cjb@laptop.org>
2011-07-20mmc: dw_mmc: remove unnecessary error messagesJames Hogan
Remove error messages for timeout and CRC failure, since the error code already indicates the problem. Signed-off-by: James Hogan <james.hogan@imgtec.com> Acked-by: Will Newton <will.newton@imgtec.com> Tested-by: Jaehoon Chung <jh80.chung@samsung.com> Signed-off-by: Chris Ball <cjb@laptop.org>
2011-07-20mmc: dw_mmc: fix stop when fallen back to PIOJames Hogan
There are several situations when dw_mci_submit_data_dma() decides to fall back to PIO mode instead of using DMA, due to a short (to avoid overhead) or "complex" (e.g. with unaligned buffers) transaction, even though host->use_dma is set. However dw_mci_stop_dma() decides whether to stop DMA or set the EVENT_XFER_COMPLETE event based on host->use_dma. When falling back to PIO mode this results in data timeout errors getting missed and the driver locking up. Therefore add host->using_dma to indicate whether the current transaction is using dma or not, and adjust dw_mci_stop_dma() to use that instead. Signed-off-by: James Hogan <james.hogan@imgtec.com> Acked-by: Will Newton <will.newton@imgtec.com> Tested-by: Jaehoon Chung <jh80.chung@samsung.com> Signed-off-by: Chris Ball <cjb@laptop.org>
2011-07-20mmc: dw_mmc: handle unaligned buffers and sizesJames Hogan
Update functions for PIO pushing and pulling data to and from the FIFO so that they can handle unaligned output buffers and unaligned buffer lengths. This makes more of the tests in mmc_test pass. Unaligned lengths in pulls are handled by reading the full FIFO item, and storing the remaining bytes in a small internal buffer (part_buf). The next data pull will copy data out of this buffer first before accessing the FIFO again. Similarly, for pushes the final bytes that don't fill a FIFO item are stored in the part_buf (or sent anyway if it's the last transfer), and then the part_buf is included at the beginning of the next buffer pushed. Unaligned buffers in pulls are handled specially if the architecture cannot do efficient unaligned accesses, by reading FIFO items into a aligned local buffer, and memcpy'ing them into the output buffer, again storing any remaining bytes in the internal buffer. Similarly for pushes the buffer is memcpy'd into an aligned local buffer then written to the FIFO. Signed-off-by: James Hogan <james.hogan@imgtec.com> Acked-by: Will Newton <will.newton@imgtec.com> Signed-off-by: Chris Ball <cjb@laptop.org>
2011-07-20mmc: dw_mmc: don't hard code fifo depth, fix usageJames Hogan
The FIFO_DEPTH hardware configuration parameter can be found from the power-on value of RX_WMark in the FIFOTH register. This is used to initialise the watermarks, but when calculating the number of free fifo spaces a preprocessor definition is used which is hard coded to 32. Fix reading the value out of FIFOTH (the default value in the RX_WMark field is FIFO_DEPTH-1 not FIFO_DEPTH). Allow the fifo depth to be overriden by platform data (since a bootloader may have changed FIFOTH making auto-detection unreliable). Store the fifo_depth for later use. Also fix the calculation to find the number of free bytes in the fifo to include the fifo depth in the left shift by the data shift, since the fifo depth is measured in fifo items not bytes. Signed-off-by: James Hogan <james.hogan@imgtec.com> Acked-by: Will Newton <will.newton@imgtec.com> Signed-off-by: Chris Ball <cjb@laptop.org>
2011-07-20mmc: dw_mmc: convert card tasklet to workqueueJames Hogan
Convert the card insert/remove tasklet to a workqueue, and call the setpower platform specific callback without the spinlock held. This means neither of the setpower or get_cd callbacks are called from atomic context which allows them to sleep. Signed-off-by: James Hogan <james.hogan@imgtec.com> Acked-by: Will Newton <will.newton@imgtec.com> Signed-off-by: Chris Ball <cjb@laptop.org>
2011-07-20mmc: dw_mmc: fix race with request and removalJames Hogan
When a request is made, the card presence is checked and the request is queued. These two parts must be atomic with respect to card removal, or a card removal could be handled in between, and the new request wouldn't get cancelled until another card was inserted. Therefore move the spinlock protection from dw_mci_queue_request() up into dw_mci_request() to cover the presence check. Note that the test_bit() used for the presence check isn't atomic itself, so should have been protected by a spinlock anyway. Signed-off-by: James Hogan <james.hogan@imgtec.com> Acked-by: Will Newton <will.newton@imgtec.com> Signed-off-by: Chris Ball <cjb@laptop.org>
2011-07-20mmc: dw_mmc: clear TXDR/RXDR ints before enablingJames Hogan
DMA is only used for transactions exceeding a certain length, otherwise PIO is used. The TXDR and RXDR interrupts are masked when in DMA mode but still fire. When switching to PIO mode (e.g. to get SCR field when an SD card is inserted) these interrupts are not cleared and so they trigger the ISR as soon as they are unmasked. If the previous DMA did a write, then the ISR will handle the TXDR interrupt even if the transaction is a read, completing the transaction without modifying the read buffer. This is fixed primarily by clearing these two interrupts before unmasking them when setting up PIO mode, and also by making the ISR more robust by only handling TXDR/RXDR in the correct read/write direction. Signed-off-by: James Hogan <james.hogan@imgtec.com> Acked-by: Will Newton <will.newton@imgtec.com> Signed-off-by: Chris Ball <cjb@laptop.org>
2011-07-20mmc: dw_mmc: protect a sequence of request and request-done.Seungwon Jeon
Response timeout (RTO), Response crc error (RCRC) and Response error (RE) signals come with command done (CD) and can be raised preceding command done (CD). That is these error interrupts and CD can be handled in separate dw_mci_interrupt(). If mmc_request_done() is called because of a response timeout before command done has occured, we might send the next request before the CD of current request is finished. This can bring about a broken sequence of request and request-done. And Data error interrupt (DRTO, DCRC, SBE, EBE) and data transfer over (DTO) have the same problem. Signed-off-by: Seungwon Jeon <tgih.jun@samsung.com> Acked-by: Will Newton <will.newton@imgtec.com> Signed-off-by: Chris Ball <cjb@laptop.org>
2011-07-20mmc: dw_mmc: set the card_width bit per card.Seungwon Jeon
This patch sets the card_width bit of CTYPE for the corresponding card. CTYPE[31] and CTYPE[16] correspond respectively to card[15] and card[0] for 8-bit mode. And CTYPE[15] and CTYPE[0] correspond respectively to card[15] and CTYPE[0] for 1-bit or 4-bit mode. Signed-off-by: Seungwon Jeon <tgih.jun@samsung.com> Acked-by: Will Newton <will.newton@imgtec.com> Signed-off-by: Chris Ball <cjb@laptop.org>
2011-06-10treewide: Convert uses of struct resource to resource_size(ptr)Joe Perches
Several fixes as well where the +1 was missing. Done via coccinelle scripts like: @@ struct resource *ptr; @@ - ptr->end - ptr->start + 1 + resource_size(ptr) and some grep and typing. Mostly uncompiled, no cross-compilers. Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2011-05-24mmc: dw_mmc: fixed wrong regulator_enable in suspend/resumeJaehoon Chung
regulator_enable() was incorrectly placed in the suspend function instead of the resume function. Signed-off-by: Jaehoon Chung <jh80.chung@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Acked-by: Will Newton <will.newton@imgtec.com> Signed-off-by: Chris Ball <cjb@laptop.org>
2011-03-25mmc: dw_mmc: set fixed burst in BMOD registerJaehoon Chung
This patch uses the fixed burst bit when using an internal DMA controller. I found increased performance with IDMAC when this bit is set. Signed-off-by: Jaehoon Chung <jh80.chung@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Chris Ball <cjb@laptop.org>
2011-03-17mmc: dw_mmc: support mmc power control with regulatorJaehoon Chung
This patch adds support for power regulators. Signed-off-by: Jaehoon Chung <jh80.chung@samsung.com> Signed-off-by: kyungmin Park <kyungmin.park@samsung.com> Acked-by: Will Newton <will.newton@imgtec.com> Signed-off-by: Chris Ball <cjb@laptop.org>
2011-03-17mmc: dw_mmc: fix suspend/resume operationJaehoon Chung
This patch is related to re-init processing on suspend/resume. When card is resuming, some register is reset. If card is removable, maybe controller should be rescan for card. But if assume card is non-removable, need to restore the old value at registers. We store the value of FIFOTH at probe time and then restore it in dw_mci_resume(). Signed-off-by: Jaehoon Chung <jh80.chung@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Acked-by: Will Newton <will.newton@imgtec.com> Signed-off-by: Chris Ball <cjb@laptop.org>
2011-03-17mmc: dw_mmc: add quirks for unreliable card detect, and capabilitiesJaehoon Chung
This patch adds quirks and capabilities to platdata. Some cards don't use the CDn pin; in that case, we assume the card's inserted. Some boards need other capabilities. So, we add capabilities in the board's platdata. Signed-off-by: Jaehoon Chung <jh80.chung@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Acked-by: Will Newton <will.newton@imgtec.com> Signed-off-by: Chris Ball <cjb@laptop.org>
2011-03-17mmc: dw_mmc: Remove set-but-unused variable.Chris Ball
count is only ever used by assigning to old_len if count == 0, and then old_len isn't ever used at all. So, both are redundant. Fixes: drivers/mmc/host/dw_mmc.c: In function ‘dw_mci_read_data_pio’: drivers/mmc/host/dw_mmc.c:1034:32: warning: variable ‘old_len’ set but not used [-Wunused-but-set-variable] Signed-off-by: Chris Ball <cjb@laptop.org> Acked-by: Will Newton <will.newton@imgtec.com>
2011-03-15mmc: dw_mmc: support DDR modeJaehoon Chung
This patch adds DDR mode support to dw_mmc. If we set any bit in UHS_REG bit[16:31], the card of that slot is supported for DDR mode. For example, if UHS_REG[16] is set, card number 0 is DDR mode. Signed-off-by: Jaehoon Chung <jh80.chung@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Acked-by: Will Newton <will.newton@imgtec.com> Signed-off-by: Chris Ball <cjb@laptop.org>
2011-03-15mmc: dw_mmc: support 8-bit buswidthJaehoon Chung
This patch adds support for 8-bit buswidth. dw_mmc can use 8-bit buswidth and set to CTYPE_8BIT in card-type register. Signed-off-by: Jaehoon Chung <jh80.chung@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Acked-by: Will Newton <will.newton@imgtec.com> Signed-off-by: Chris Ball <cjb@laptop.org>
2011-03-15mmc: dw_mmc: Enable low-power mode for the card clock.Will Newton
Setting this bit in the clock enable register will stop the clock when the card is in the IDLE state. Signed-off-by: Will Newton <will.newton@imgtec.com> Signed-off-by: Chris Ball <cjb@laptop.org>
2011-03-15mmc: dw_mmc: Run card detect tasklet during slot initialisation.Will Newton
We need to run the card detect tasklet at the end of slot initialisation as it is possible that a card has been inserted prior to boot, so we don't see an insertion interrupt and now the card is sitting there inserted but with no power to it. Signed-off-by: Neil Jones <neil.jones@imgtec.com> Signed-off-by: Will Newton <will.newton@imgtec.com> Reviewed-by: Matt Fleming <matt@console-pimps.org> Signed-off-by: Chris Ball <cjb@laptop.org>
2011-01-08mmc: dw_mmc: Add Synopsys DesignWare mmc host driver.Will Newton
This adds the mmc host driver for the Synopsys DesignWare mmc host controller, found in a number of embedded SoC designs. Signed-off-by: Will Newton <will.newton@imgtec.com> Reviewed-by: Matt Fleming <matt@console-pimps.org> Reviewed-by: Chris Ball <cjb@laptop.org> Signed-off-by: Chris Ball <cjb@laptop.org>
generated by cgit v1.2.3 (git 2.39.1) at 2024-06-29 11:49:46 +0000