summaryrefslogtreecommitdiff
path: root/drivers/mtd
AgeCommit message (Collapse)Author
2011-11-07MTD: MAPS: bcm963xx-flash.c: explicitly include module.hJonas Gorski
module.h was previously implicitly included through mtd/mtd.h. Fixes the following build failure after the module.h cleanup: CC drivers/mtd/maps/bcm963xx-flash.o drivers/mtd/maps/bcm963xx-flash.c: In function 'bcm963xx_probe': drivers/mtd/maps/bcm963xx-flash.c:208:29: error: 'THIS_MODULE' undeclared (first use in this function) [...] drivers/mtd/maps/bcm963xx-flash.c:276:1: warning: type defaults to 'int' in declaration of 'MODULE_AUTHOR' drivers/mtd/maps/bcm963xx-flash.c:276:15: warning: function declaration isn't a prototype make[7]: *** [drivers/mtd/maps/bcm963xx-flash.o] Error 1 Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com> Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
2011-11-07Merge git://git.infradead.org/mtd-2.6Linus Torvalds
* git://git.infradead.org/mtd-2.6: (226 commits) mtd: tests: annotate as DANGEROUS in Kconfig mtd: tests: don't use mtd0 as a default mtd: clean up usage of MTD_DOCPROBE_ADDRESS jffs2: add compr=lzo and compr=zlib options jffs2: implement mount option parsing and compression overriding mtd: nand: initialize ops.mode mtd: provide an alias for the redboot module name mtd: m25p80: don't probe device which has status of 'disabled' mtd: nand_h1900 never worked mtd: Add DiskOnChip G3 support mtd: m25p80: add EON flash EN25Q32B into spi flash id table mtd: mark block device queue as non-rotational mtd: r852: make r852_pm_ops static mtd: m25p80: add support for at25df321a spi data flash mtd: mxc_nand: preset_v1_v2: unlock all NAND flash blocks mtd: nand: switch `check_pattern()' to standard `memcmp()' mtd: nand: invalidate cache on unaligned reads mtd: nand: do not scan bad blocks with NAND_BBT_NO_OOB set mtd: nand: wait to set BBT version mtd: nand: scrub BBT on ECC errors ... Fix up trivial conflicts: - arch/arm/mach-at91/board-usb-a9260.c Merged into board-usb-a926x.c - drivers/mtd/maps/lantiq-flash.c add_mtd_partitions -> mtd_device_register vs changed to use mtd_device_parse_register.
2011-11-06Merge branch 'modsplit-Oct31_2011' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/paulg/linux * 'modsplit-Oct31_2011' of git://git.kernel.org/pub/scm/linux/kernel/git/paulg/linux: (230 commits) Revert "tracing: Include module.h in define_trace.h" irq: don't put module.h into irq.h for tracking irqgen modules. bluetooth: macroize two small inlines to avoid module.h ip_vs.h: fix implicit use of module_get/module_put from module.h nf_conntrack.h: fix up fallout from implicit moduleparam.h presence include: replace linux/module.h with "struct module" wherever possible include: convert various register fcns to macros to avoid include chaining crypto.h: remove unused crypto_tfm_alg_modname() inline uwb.h: fix implicit use of asm/page.h for PAGE_SIZE pm_runtime.h: explicitly requires notifier.h linux/dmaengine.h: fix implicit use of bitmap.h and asm/page.h miscdevice.h: fix up implicit use of lists and types stop_machine.h: fix implicit use of smp.h for smp_processor_id of: fix implicit use of errno.h in include/linux/of.h of_platform.h: delete needless include <linux/module.h> acpi: remove module.h include from platform/aclinux.h miscdevice.h: delete unnecessary inclusion of module.h device_cgroup.h: delete needless include <linux/module.h> net: sch_generic remove redundant use of <linux/module.h> net: inet_timewait_sock doesnt need <linux/module.h> ... Fix up trivial conflicts (other header files, and removal of the ab3550 mfd driver) in - drivers/media/dvb/frontends/dibx000_common.c - drivers/media/video/{mt9m111.c,ov6650.c} - drivers/mfd/ab3550-core.c - include/linux/dmaengine.h
2011-11-03Merge branch 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linusLinus Torvalds
* 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linus: (37 commits) MIPS: O32: Provide definition of registers ta0 .. ta3. MIPS: perf: Add Octeon support for hardware perf. MIPS: perf: Add support for 64-bit perf counters. MIPS: perf: Reorganize contents of perf support files. MIPS: perf: Cleanup formatting in arch/mips/kernel/perf_event.c MIPS: Add accessor macros for 64-bit performance counter registers. MIPS: Add probes for more Octeon II CPUs. MIPS: Add more CPU identifiers for Octeon II CPUs. MIPS: XLR, XLS: Add comment for smp setup MIPS: JZ4740: GPIO: Check correct IRQ in demux handler MIPS: JZ4740: GPIO: Simplify IRQ demuxer MIPS: JZ4740: Use generic irq chip MIPS: Alchemy: remove all CONFIG_SOC_AU1??? defines MIPS: Alchemy: kill au1xxx.h header MIPS: Alchemy: clean DMA code of CONFIG_SOC_AU1??? defines MIPS, IDE: Alchem, au1xxx-ide: Remove pb1200/db1200 header dep MIPS: Alchemy: Redo PCI as platform driver MIPS: Alchemy: more base address cleanup MIPS: Alchemy: rewrite USB platform setup. MIPS: Alchemy: abstract USB block control register access ... Fix up trivial conflicts in: arch/mips/alchemy/devboards/db1x00/platform.c drivers/ide/Kconfig drivers/mmc/host/au1xmmc.c drivers/video/Kconfig sound/mips/Kconfig
2011-11-02filesystems: add missing nlink wrappersMiklos Szeredi
Replace direct i_nlink updates with the respective updater function (inc_nlink, drop_nlink, clear_nlink, inode_dec_link_count). Signed-off-by: Miklos Szeredi <mszeredi@suse.cz>
2011-10-31mtd: Add module.h to drivers users that were implicitly using it.Paul Gortmaker
We are cleaning up the implicit presence of module.h that these drivers are taking advantage of. Fix them in advance of the cleanup operation. Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
2011-10-31mtd: Add export.h for EXPORT_SYMBOL/THIS_MODULE where neededPaul Gortmaker
These two common macros will be no longer present everywhere. Call out the include needs of them explicitly where required. Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
2011-10-30mtd: tests: annotate as DANGEROUS in KconfigWolfram Sang
The tests may erase mtd devices, so annotate them as suggested per coding style and add a paragraph to the help text as well. Artem: amended the help test a bit. Signed-off-by: Wolfram Sang <w.sang@pengutronix.de> Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@intel.com>
2011-10-30mtd: tests: don't use mtd0 as a defaultWolfram Sang
mtd tests may erase the mtd device, so force the user to specify which mtd device to test by using the module parameter. Disable the default (using mtd0) since this may destroy a vital part of the flash if the module is inserted accidently or carelessly. Reported-by: Roland Kletzing <devzero@web.de> Signed-off-by: Wolfram Sang <w.sang@pengutronix.de> Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@intel.com>
2011-10-30mtd: clean up usage of MTD_DOCPROBE_ADDRESSPaul Bolle
Depending on whether MTD_DOCPROBE_ADVANCED is set or not, MTD_DOCPROBE_ADDRESS will default to either 0x0000 or 0. That should lead to (basically) identical code in docprobe.c. The current two defaults should be merged. And, while we're at it, if MTD_DOCPROBE is set MTD_DOCPROBE_ADDRESS will always be set. (MTD_DOCPROBE_ADDRESS depends on MTD_DOCPROBE and it has a default value.) So the check whether CONFIG_MTD_DOCPROBE_ADDRESS is defined is unnecessary and should be dropped. Signed-off-by: Paul Bolle <pebolle@tiscali.nl> Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>
2011-10-27Merge branch 'gpio' of ↵Linus Torvalds
http://ftp.arm.linux.org.uk/pub/linux/arm/kernel/git-cur/linux-2.6-arm * 'gpio' of http://ftp.arm.linux.org.uk/pub/linux/arm/kernel/git-cur/linux-2.6-arm: (43 commits) ARM: 7135/1: ep93xx: bring back missing <mach/gpio.h> ARM: 7104/1: plat-pxa: break out GPIO driver specifics ARM: 7103/1: plat-pxa: move PXA GPIO driver to GPIO subsystem ARM: 7042/3: mach-ep93xx: break out GPIO driver specifics ARM: 7101/1: arm/tegra: Replace <mach/gpio.h> with <mach/gpio-tegra.h> ARM: 7094/1: arm/tegra: Move EN_VDD_1V05_GPIO to board-harmony.h ARM: 7083/1: rewrite U300 GPIO to use gpiolib ARM: 7074/1: gpio: davinci: eliminate unused variable warnings ARM: 7063/1: Orion: gpio: add missing include of linux/types.h ARM: 7055/1: arm/tegra: mach/gpio.h: include linux/types.h to fix build ARM: 7054/1: arm/tegra: Delete custom gpio_to_irq, and irq_to_gpio ARM: 7053/1: gpio/tegra: Implement gpio_chip.to_irq ARM: 7052/1: gpio/tegra: Remove use of irq_to_gpio ARM: 7057/1: mach-pnx4008: rename GPIO header ARM: 7056/1: plat-nomadik: kill off <plat/gpio.h> ARM: 7050/1: mach-sa1100: delete irq_to_gpio() function ARM: 7049/1: mach-sa1100: move SA1100 GPIO driver to GPIO subsystem ARM: 7045/1: mach-lpc32xx: break out GPIO driver specifics ARM: 7044/1: mach-lpc32xx: move LPC32XX GPIO driver to GPIO subsystem ARM: 7043/1: mach-ixp2000: rename GPIO header ... Fix up trivial conflicts in arch/arm/mach-u300/Kconfig manually
2011-10-24MIPS: Alchemy: remove all CONFIG_SOC_AU1??? definesManuel Lauss
Now that no driver any longer depends on the CONFIG_SOC_AU1??? symbols, it's time to get rid of them: Move some of the platform devices to the boards which can use them, Rename a few (unused) constants in the header, Replace them with MIPS_ALCHEMY in the various Kconfig files. Finally delete them altogether from the Alchemy Kconfig file. Signed-off-by: Manuel Lauss <manuel.lauss@googlemail.com> To: Linux-MIPS <linux-mips@linux-mips.org> Patchwork: https://patchwork.linux-mips.org/patch/2707/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2011-10-24MIPS: Alchemy: kill au1xxx.h headerManuel Lauss
No longer required Signed-off-by: Manuel Lauss <manuel.lauss@googlemail.com> To: Linux-MIPS <linux-mips@linux-mips.org> Patchwork: https://patchwork.linux-mips.org/patch/2705/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org> delete mode 100644 arch/mips/include/asm/mach-au1x00/au1xxx.h
2011-10-20MIPS: Lantiq: Fix MTD registration of NOR deviceJohn Crispin
The 2 functions add_mtd_partitions and del_mtd_partitions were renamed to mtd_device_register and mtd_device_unregister. Signed-of-by: John Crispin <blogic@openwrt.org> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/2463/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2011-10-16mtd: nand: initialize ops.modeBrian Norris
Our `ops' information was converted to a local variable recently, and apparently, old code relied on the fact that the global version was often left in a valid mode. We can't make this assumption on local structs, and we shouldn't be relying on a previous state anyway. Instead, we initialize mode to 0 for don't-care situations (i.e., the operation does not use OOB anyway) and MTD_OPS_PLACE_OOB when we want to place OOB data. This fixes a bug with nand_default_block_markbad(), where we catch on the BUG() call in nand_fill_oob(): Kernel bug detected[#1]: ... Call Trace: [<80307350>] nand_fill_oob.clone.5+0xa4/0x15c [<803075d8>] nand_do_write_oob+0x1d0/0x260 [<803077c4>] nand_default_block_markbad+0x15c/0x1a8 [<802e8c2c>] part_block_markbad+0x80/0x98 [<802ebc74>] mtd_ioctl+0x6d8/0xbd0 [<802ec1a4>] mtd_unlocked_ioctl+0x38/0x5c [<800d9c60>] do_vfs_ioctl+0xa4/0x6e4 [<800da2e4>] sys_ioctl+0x44/0xa0 [<8001381c>] stack_done+0x20/0x40 Signed-off-by: Brian Norris <computersforpeace@gmail.com> Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>
2011-10-16mtd: provide an alias for the redboot module nameAndres Salomon
parse_mtd_partitions takes a list of partition types; if the driver isn't loaded, it attempts to load it, and then it grabs the partition parser. For redboot, the module name is "redboot.ko", while the parser name is "RedBoot". Since modprobe is case-sensitive, attempting to modprobe "RedBoot" will never work. I suspect the embedded systems that make use of redboot just always manually loaded redboot prior to loading their specific nand chip drivers (or statically compiled it in). Signed-off-by: Andres Salomon <dilinger@queued.net> Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com> Cc: stable@kernel.org
2011-10-16mtd: m25p80: don't probe device which has status of 'disabled'Shaohui Xie
On some platforms such as P3060QDS, has multiple spi flashes, but they are not available at same time, so if their status is 'disabled', which is set by u-boot, will not be probed. Signed-off-by: Shaohui Xie <Shaohui.Xie@freescale.com> Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>
2011-10-16mtd: nand_h1900 never workedArnd Bergmann
This driver has been broken through all of git history and cannot even be built. Better mark it as broken. Next stop is removing from the tree. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Eric Miao <eric.y.miao@gmail.com> Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>
2011-10-14mtd: Add DiskOnChip G3 supportRobert Jarzmik
Add support for DiskOnChip G3 chips. The support is quite limited yet : - no flash writes/erases are implemented - ECC fixes are not implemented - powerdown is not implemented - IPL handling is not yet done On the brighter side, the chip reading does work. Signed-off-by: Robert Jarzmik <robert.jarzmik@free.fr>
2011-10-14mtd: m25p80: add EON flash EN25Q32B into spi flash id tableShaohui Xie
Add support for EON spi flash EN25Q32B, which is not listed in id table, need to add it in the id table to support the EON flash. Signed-off-by: Shaohui Xie <Shaohui.Xie@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org> Acked-by: Mike Frysinger <vapier@gentoo.org> Signed-off-by: Artem Bityutskiy <artem.bityutskiy@intel.com>
2011-10-14mtd: mark block device queue as non-rotationalDan McGee
This is similar to what the nbd driver does, among others. Signed-off-by: Dan McGee <dpmcgee@gmail.com> Signed-off-by: Artem Bityutskiy <artem.bityutskiy@intel.com>
2011-10-01mtd: r852: make r852_pm_ops staticAxel Lin
It is not used outside this driver so no need to make the symbol global. Also make r852_suspend and r852_resume static. Signed-off-by: Axel Lin <axel.lin@gmail.com> Signed-off-by: Artem Bityutskiy <artem.bityutskiy@intel.com>
2011-09-27doc: fix broken referencesPaul Bolle
There are numerous broken references to Documentation files (in other Documentation files, in comments, etc.). These broken references are caused by typo's in the references, and by renames or removals of the Documentation files. Some broken references are simply odd. Fix these broken references, sometimes by dropping the irrelevant text they were part of. Signed-off-by: Paul Bolle <pebolle@tiscali.nl> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2011-09-26mtd: m25p80: add support for at25df321a spi data flashMikhail Kshevetskiy
Signed-off-by: Mikhail Kshevetskiy <mikhail.kshevetskiy@gmail.com> Signed-off-by: Artem Bityutskiy <artem.bityutskiy@intel.com>
2011-09-23mtd: mxc_nand: preset_v1_v2: unlock all NAND flash blocksWolfram Stering
For NFC v1, the unlock end block address was 0x4000, which would only unlock the first 32 blocks of the NAND flash. Change that value to 0xffff to unlock all available blocks, as is done for NFC v21 as well. Signed-off-by: Michael Thalmeier <michael.thalmeier@hale.at> Signed-off-by: Artem Bityutskiy <artem.bityutskiy@intel.com>
2011-09-21mtd: nand: switch `check_pattern()' to standard `memcmp()'Brian Norris
A portion of the `check_pattern()' function is basically a `memcmp()'. Since it's possible for `memcmp()' to be optimized for a particular architecture, we should use it instead. Signed-off-by: Brian Norris <computersforpeace@gmail.com> Signed-off-by: Artem Bityutskiy <artem.bityutskiy@intel.com>
2011-09-21mtd: nand: invalidate cache on unaligned readsBrian Norris
In rare cases, we are given an unaligned parameter `from' in `nand_do_read_ops()'. In such cases, we use the page cache (chip->buffers->databuf) as an intermediate buffer before dumping to the client buffer. However, there are also cases where this buffer is not cleanly reusable. In those cases, we need to make sure that we explicitly invalidate the cache. This patch prevents accidental reusage of the page cache, and for me, this solves some problems I come across when reading a corrupted BBT from flash (NAND_BBT_USE_FLASH and NAND_BBT_NO_OOB). Note: the rare "unaligned" case is a result of the extra BBT pattern + version located in the data area instead of OOB. Also, this patch disables caching on raw reads, since we are reading without error correction. This is, obviously, prone to errors and should not be cached. Signed-off-by: Brian Norris <computersforpeace@gmail.com> Signed-off-by: Artem Bityutskiy <artem.bityutskiy@intel.com>
2011-09-21mtd: nand: do not scan bad blocks with NAND_BBT_NO_OOB setBrian Norris
Updates to our default function for creating bad block patterns have broken the "no OOB" feature. The NAND_BBT_NO_OOB option should not be set while scanning for bad blocks, but we've been passing all BBT options from nand_chip.bbt_options to the bad block scan. This causes us to hit the: BUG_ON(bd->options & NAND_BBT_NO_OOB); in create_bbt() when we scan the flash for bad blocks. Thus, while it can be legal to set NAND_BBT_NO_OOB in a custom badblock pattern descriptor (presumably with NAND_BBT_CREATE disabled?), we should not pass it through in our default function. Also, to help clarify and emphasize that the function creates bad block patterns only (not, for example, table descriptors for locating flash-based BBT), I renamed `nand_create_default_bbt_descr' to `nand_create_badblock_pattern'. Signed-off-by: Brian Norris <computersforpeace@gmail.com> Signed-off-by: Artem Bityutskiy <artem.bityutskiy@intel.com>
2011-09-21mtd: nand: wait to set BBT versionBrian Norris
Because there are so many cases of checking, writing, and re-writing of the bad block table(s), we might as well wait until the we've settled on a valid, clean copy of the table. This also prevents us from falsely incrementing the table version. For example, we may have the following: Primary table, with version 0x02 Mirror table, with version 0x01 Primary table has uncorrectable ECC errors If we don't have this fix applied, then we will: Choose to read the primary table (higher version) Set mirror table version to 0x02 Read back primary table Invalidate table because of ECC errors Retry readback operation with mirror table, now version 0x02 Mirrored table reads cleanly Writeback BBT to primary table location (with "version 0x02") However, the mirrored table shouldn't have a new version number. Instead, we actually want: Choose to read the primary table (higher version) Read back primary table Invalidate table because of ECC errors Retry readback with mirror table (version 0x01) Mirrored table reads cleanly Set both tables to version 0x01 Writeback BBT to primary table location (version 0x01) Signed-off-by: Brian Norris <computersforpeace@gmail.com> Signed-off-by: Artem Bityutskiy <artem.bityutskiy@intel.com>
2011-09-21mtd: nand: scrub BBT on ECC errorsBrian Norris
Now that `read_bbt()' returns ECC error codes properly, we handle those codes when checking the integrity of our flash-based BBT. The modifications can be described by this new policy: *) On any uncorrected ECC error, we invalidate the corresponding table and retry our version-checking integrity logic. *) On corrected bitflips, we mark both tables for re-writing to flash (a.k.a. scrubbing). Current integrity checks (i.e., comparing version numbers, etc.) should take care of all the cases that result in rescanning the device for bad blocks or falling back to the BBT as found in the mirror descriptor. Signed-off-by: Brian Norris <computersforpeace@gmail.com> Signed-off-by: Artem Bityutskiy <artem.bityutskiy@intel.com>
2011-09-21mtd: nand: report ECC errors properly when reading BBTBrian Norris
Instead of just printing a warning when encountering ECC errors, we should return a proper error status and print a more informative warning. Later, we will handle these error messages in the upper layers of the BBT scan. Note that this patch makes our check for ECC error codes a little bit more restrictive, leaving all unrecognized errors to the generic "else" clause. This shouldn't cause problems and could even be a benefit. This code is based on some findings reported by Matthieu Castet. Reported-by: Matthieu CASTET <matthieu.castet@parrot.com> Signed-off-by: Brian Norris <computersforpeace@gmail.com> Signed-off-by: Artem Bityutskiy <artem.bityutskiy@intel.com>
2011-09-21mtd: utilize `mtd_is_*()' functionsBrian Norris
Signed-off-by: Brian Norris <computersforpeace@gmail.com> Signed-off-by: Artem Bityutskiy <artem.bityutskiy@intel.com>
2011-09-11mtd: nand: remove gotos in `check_create()'Brian Norris
This is a second step in restructuring `check_create()'. When we don't rely on goto statements for our main functionality, the code will become a little easier to manipulate. Signed-off-by: Brian Norris <computersforpeace@gmail.com> Signed-off-by: Artem Bityutskiy <artem.bityutskiy@intel.com>
2011-09-11mtd: nand: begin restructuring check_createBrian Norris
We will begin restructuring the code for check_create so that we can make some important changes. For now, we should just begin to get rid of some goto statements to make things cleaner. This is the first step of a few, which are separated to make them easier to follow. This step should just be a code refactor. Signed-off-by: Brian Norris <computersforpeace@gmail.com> Signed-off-by: Artem Bityutskiy <artem.bityutskiy@intel.com>
2011-09-11mtd: nand: fix styleBrian Norris
Remove some extra spaces Consistently use '0x' prefix for bitfield-like constants Spelling: "aplies" -> "applies" Signed-off-by: Brian Norris <computersforpeace@gmail.com> Signed-off-by: Artem Bityutskiy <artem.bityutskiy@intel.com>
2011-09-11mtd: nand: remove unnecessary variableBrian Norris
`writeops' is unnecessary in the function `nand_update_bbt()' Signed-off-by: Brian Norris <computersforpeace@gmail.com> Signed-off-by: Artem Bityutskiy <artem.bityutskiy@intel.com>
2011-09-11mtd: nand: do not ignore all ECC errorsBrian Norris
There are a few reasons not to ignore ECC errors here. First, mtd->read_oob is being called in raw mode, so there should be no error correction in the first place. Second, if we change this such that there *is* error correction in this function, then we will want to pass the error message upward. In fact, the code I introduced to "ignore ECC errors" would have been better if it had just placed this test down in `scan_block_full()' in the first place. We would like to ignore ECC errors when we are simply checking for bad block markers (e.g., factory marked), but we may not want to ignore ECC errors when scanning OOB for a flash-based BBT pattern (in `scan_read_raw()'; note that the return codes from `scan_read_raw()' are not actually handled yet). Signed-off-by: Brian Norris <computersforpeace@gmail.com> Signed-off-by: Artem Bityutskiy <artem.bityutskiy@intel.com>
2011-09-11mtd: nand: refactor scanning codeBrian Norris
A few pieces of code are unnecessarily duplicated. For easier maintenance, we should fix this. This should have no functional effect. Signed-off-by: Brian Norris <computersforpeace@gmail.com> Signed-off-by: Artem Bityutskiy <artem.bityutskiy@intel.com>
2011-09-11mtd: drop Integrator flash map KconfigLinus Walleij
The integrator flash has been deleted, even from the Makefile. Drop the Kconfig entry as well. Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Acked-by: Marc Zyngier <marc.zyngier@arm.com> Signed-off-by: Artem Bityutskiy <artem.bityutskiy@intel.com>
2011-09-11mtd: kill old field for `struct mtd_info_user'Brian Norris
The ecctype and eccsize fields have been obsolete for a while. Since they don't have any users, we can kill them and leave padding in their place for now. Signed-off-by: Brian Norris <computersforpeace@gmail.com> Signed-off-by: Artem Bityutskiy <artem.bityutskiy@intel.com>
2011-09-11mtd: nand: kill member `ops' of `struct nand_chip'Brian Norris
The nand_chip.ops field is a struct that is passed around globally with no particular reason. Every time it is used, it could just as easily be replaced with a local struct that is updated on each operation. So make it local. Signed-off-by: Brian Norris <computersforpeace@gmail.com> Signed-off-by: Artem Bityutskiy <artem.bityutskiy@intel.com>
2011-09-11mtd: add MEMWRITE ioctlBrian Norris
Implement a new ioctl for writing both page data and OOB to flash at the same time. This ioctl is intended to be a generic interface that can replace other ioctls (MEMWRITEOOB and MEMWRITEOOB64) and cover the functionality of several other old ones, e.g., MEMWRITE can: * write autoplaced OOB instead of using ECCGETLAYOUT (deprecated) and working around the reserved areas * write raw (no ECC) OOB instead of using MTDFILEMODE to set the per-file-descriptor MTD_FILE_MODE_RAW * write raw (no ECC) data instead of using MTDFILEMODE (MTD_FILE_MODE_RAW) and using standard character device "write" This ioctl is especially useful for MLC NAND, which cannot be written twice (i.e., we cannot successfully write the page data and OOB in two separate operations). Instead, MEMWRITE can write both in a single operation. Note that this ioctl is not affected by the MTD file mode (i.e., MTD_FILE_MODE_RAW vs. MTD_FILE_MODE_NORMAL), since it receives its write mode as an input parameter. Signed-off-by: Brian Norris <computersforpeace@gmail.com> Signed-off-by: Artem Bityutskiy <artem.bityutskiy@intel.com>
2011-09-11mtd: rename MTD_MODE_* to MTD_FILE_MODE_*Brian Norris
These modes hold their state only for the life of their file descriptor, and they overlap functionality with the MTD_OPS_* modes. Particularly, MTD_MODE_RAW and MTD_OPS_RAW cover the same function: to provide raw (i.e., without ECC) access to the flash. In fact, although it may not be clear, MTD_MODE_RAW implied that operations should enable the MTD_OPS_RAW mode. Thus, we should be specific on what each mode means. This is a start, where MTD_FILE_MODE_* actually represents a "file mode," not necessarily a true global MTD mode. Signed-off-by: Brian Norris <computersforpeace@gmail.com> Signed-off-by: Artem Bityutskiy <artem.bityutskiy@intel.com>
2011-09-11mtd: rename MTD_OOB_* to MTD_OPS_*Brian Norris
These modes are not necessarily for OOB only. Particularly, MTD_OOB_RAW affected operations on in-band page data as well. To clarify these options and to emphasize that their effect is applied per-operation, we change the primary prefix to MTD_OPS_. Signed-off-by: Brian Norris <computersforpeace@gmail.com> Signed-off-by: Artem Bityutskiy <artem.bityutskiy@intel.com>
2011-09-11mtd: move mtd_oob_mode_t to shared kernel/user spaceBrian Norris
We will want to use the MTD_OOB_{PLACE,AUTO,RAW} modes in user-space applications through the introduction of new ioctls, so we should make this enum a shared type. This enum is now anonymous. Artem: tweaked the patch. Signed-off-by: Brian Norris <computersforpeace@gmail.com> Signed-off-by: Artem Bityutskiy <artem.bityutskiy@intel.com>
2011-09-11mtd: support reading OOB without ECCBrian Norris
This fixes issues with `nanddump -n' and the MEMREADOOB[64] ioctls on hardware that performs error correction when reading only OOB data. A driver for such hardware needs to know when we're doing a RAW vs. a normal write, but mtd_do_read_oob does not pass such information to the lower layers (e.g., NAND). We should pass MTD_OOB_RAW or MTD_OOB_PLACE based on the MTD file mode. For now, most drivers can get away with just setting: chip->ecc.read_oob_raw = chip->ecc.read_oob This is done by default; but for systems that behave as described above, you must supply your own replacement function. This was tested with nandsim as well as on actual SLC NAND. Signed-off-by: Brian Norris <computersforpeace@gmail.com> Cc: Jim Quinlan <jim2101024@gmail.com> Signed-off-by: Artem Bityutskiy <artem.bityutskiy@intel.com>
2011-09-11mtd: support writing OOB without ECCBrian Norris
This fixes issues with `nandwrite -n -o' and the MEMWRITEOOB[64] ioctls on hardware that writes ECC when writing OOB. The problem arises as follows: `nandwrite -n' can write page data to flash without applying ECC, but when used with the `-o' option, ECC is applied (incorrectly), contrary to the `--noecc' option. I found that this is the case because my hardware computes and writes ECC data to flash upon either OOB write or page write. Thus, to support a proper "no ECC" write, my driver must know when we're performing a raw OOB write vs. a normal ECC OOB write. However, MTD does not pass any raw mode information to the write_oob functions. This patch addresses the problems by: 1) Passing MTD_OOB_RAW down to lower layers, instead of just defaulting to MTD_OOB_PLACE 2) Handling MTD_OOB_RAW within the NAND layer's `nand_do_write_oob' 3) Adding a new (replaceable) function pointer in struct ecc_ctrl; this function should support writing OOB without ECC data. Current hardware often can use the same OOB write function when writing either with or without ECC This was tested with nandsim as well as on actual SLC NAND. Signed-off-by: Brian Norris <computersforpeace@gmail.com> Cc: Jim Quinlan <jim2101024@gmail.com> Signed-off-by: Artem Bityutskiy <artem.bityutskiy@intel.com>
2011-09-11mtd: add the common code for GPMI-NAND controller driverHuang Shijie
These files contain the common code for the GPMI-NAND driver. Signed-off-by: Huang Shijie <b32955@freescale.com> Acked-by: Marek Vasut <marek.vasut@gmail.com> Tested-by: Koen Beel <koen.beel@barco.com> Signed-off-by: Artem Bityutskiy <artem.bityutskiy@intel.com>
2011-09-11mtd: add GPMI-NAND driver in the config and MakefileHuang Shijie
add the GPMI-NAND driver in the relevant Kconfig and Makefile in the MTD. Signed-off-by: Huang Shijie <b32955@freescale.com> Acked-by: Marek Vasut <marek.vasut@gmail.com> Tested-by: Koen Beel <koen.beel@barco.com> Signed-off-by: Artem Bityutskiy <artem.bityutskiy@intel.com>
2011-09-11mtd: add helper functions library and header files for GPMI NAND driverHuang Shijie
bch-regs.h : registers file for BCH module gpmi-regs.h: registers file for GPMI module gpmi-lib.c: helper functions library. Signed-off-by: Huang Shijie <b32955@freescale.com> Acked-by: Marek Vasut <marek.vasut@gmail.com> Tested-by: Koen Beel <koen.beel@barco.com> Signed-off-by: Artem Bityutskiy <artem.bityutskiy@intel.com>