summaryrefslogtreecommitdiff
path: root/drivers/net/mlx4
AgeCommit message (Collapse)Author
2008-02-14mlx4_core: Move table_find from fmr_alloc to fmr_enableJack Morgenstein
mlx4_table_find (for FMR MPTs) requires that ICM memory already be mapped. Before this fix, FMR allocation depended on ICM memory already being mapped for the MPT entry. If all currently mapped entries are taken, the find operation fails (even if the MPT ICM table still had more entries, which were just not mapped yet). This fix moves the mpt find operation to fmr_enable, to guarantee that any required ICM memory mapping has already occurred. Found by Oren Duer of Mellanox. Signed-off-by: Jack Morgenstein <jackm@dev.mellanox.co.il> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2008-02-11mlx4_core: Fix build break (missing include)Olof Johansson
Commit 313abe55 ("mlx4_core: For 64-bit systems, vmap() kernel queue buffers") caused this to pop up on powerpc allyesconfig, looks like a missing include file: drivers/net/mlx4/alloc.c: In function 'mlx4_buf_alloc': drivers/net/mlx4/alloc.c:162: error: implicit declaration of function 'vmap' drivers/net/mlx4/alloc.c:162: error: 'VM_MAP' undeclared (first use in this function) drivers/net/mlx4/alloc.c:162: error: (Each undeclared identifier is reported only once drivers/net/mlx4/alloc.c:162: error: for each function it appears in.) drivers/net/mlx4/alloc.c:162: warning: assignment makes pointer from integer without a cast drivers/net/mlx4/alloc.c: In function 'mlx4_buf_free': drivers/net/mlx4/alloc.c:187: error: implicit declaration of function 'vunmap' Signed-off-by: Olof Johansson <olof@lixom.net> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2008-02-06mlx4_core: Clean up struct mlx4_bufRoland Dreier
Now that struct mlx4_buf.u is a struct instead of a union because of the vmap() changes, there's no point in having a struct at all. So move .direct and .page_list directly into struct mlx4_buf and get rid of a bunch of unnecessary ".u"s. Signed-off-by: Roland Dreier <rolandd@cisco.com>
2008-02-06mlx4_core: For 64-bit systems, vmap() kernel queue buffersJack Morgenstein
Since kernel virtual memory is not a problem on 64-bit systems, there is no reason to use our own 2-layer page mapping scheme for large kernel queue buffers on such systems. Instead, map the page list to a single virtually contiguous buffer with vmap(), so that can we access buffer memory via direct indexing. Signed-off-by: Michael S. Tsirkin <mst@dev.mellanox.co.il> Signed-off-by: Jack Morgenstein <jackm@dev.mellanox.co.il> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2008-02-04IB: Avoid marking __devinitdata as constRoland Dreier
Signed-off-by: Roland Dreier <rolandd@cisco.com>
2008-02-04mlx4_core: Don't read reserved fields in mlx4_QUERY_ADAPTER()Jack Morgenstein
The firmware QUERY_ADAPTER command does not return vendor_id, device_id, and revision_id; eliminate these fields from the query. Initialize the rev_id field of the mlx4 device via init_node_data (MAD IFC query), as is done in the query_device verb implementation. Signed-off-by: Jack Morgenstein <jackm@dev.mellanox.co.il> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2008-02-04mlx4_core: Fix more section mismatchesRoland Dreier
Commit 3d73c288 ("mlx4_core: Fix section mismatches") fixed some of the section mismatches introduced when error recovery was added, but there were still more cases of errory recovery code calling into __devinit code from regular .text. Fix this by getting rid of the now-incorrect __devinit annotations. Signed-off-by: Roland Dreier <rolandd@cisco.com>
2008-01-25mlx4_core: Fix max_eqs masking in QUERY_DEV_CAPJack Morgenstein
log_max_eqs is a 4-bit field, not a 3-bit field in the response to the QUERY_DEV_CAP FW command, so we should mask with 0xf instead of 0x7 when reading it. Found by Yossi Leybovitch of Mellanox. Signed-off-by: Jack Morgenstein <jackm@dev.mellanox.co.il> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2007-11-20mlx4_core: Fix state check in mlx4_qp_modify()Jack Morgenstein
When checking the states passed in, mlx4_qp_modify() accidentally checks cur_state twice rather than checking cur_state and new_state. Fix this to make sure that both values are in-bounds. Since these values may be passed in from userspace, this bug results in userspace being able to trigger an oops. Signed-off-by: Jack Morgenstein <jackm@dev.mellanox.co.il> Cc: stable <stable@kernel.org> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2007-11-14mlx4_core: Fix thinko in QP destroy (incorrect bitmap_free)Jack Morgenstein
Fix thinko in commit eaf559bf ("mlx4_core: Don't free special QPs in QP number bitmap"). The old commit had the logic exactly backwards and ended up freeing *only* special QPs, which not only left the original bug in place but also introduced the problem that the QP number bitmap would get full after a while. Found by Dotan Barak of Mellanox. Signed-off-by: Jack Morgenstein <jackm@dev.mellanox.co.il> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2007-11-13mlx4_core: Fix possible bad free in mlx4_buf_free()Ali Ayoub
When mlx4_buf_free() is called from the error path of mlx4_buf_alloc(), it may be passed a buffer structure that does not have all pages filled in. Add a check for NULL to mlx4_buf_free() so we avoid passing NULL to dma_free_coherent() (which will crash). Signed-off-by: Ali Ayoub <ali@mellanox.co.il> Signed-off-by: Jack Morgenstein <jackm@dev.mellanox.co.il> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2007-10-24SG: Change sg_set_page() to take length and offset argumentJens Axboe
Most drivers need to set length and offset as well, so may as well fold those three lines into one. Add sg_assign_page() for those two locations that only needed to set the page, where the offset/length is set outside of the function context. Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2007-10-23Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/roland/infiniband * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/roland/infiniband: mlx4_core: Increase command timeout for INIT_HCA to 10 seconds IPoIB/cm: Use common CQ for CM send completions IB/uverbs: Fix checking of userspace object ownership IB/mlx4: Sanity check userspace send queue sizes IPoIB: Rewrite "if (!likely(...))" as "if (unlikely(!(...)))" IB/ehca: Enable large page MRs by default IB/ehca: Change meaning of hca_cap_mr_pgsize IB/ehca: Fix ehca_encode_hwpage_size() and alloc_fmr() IB/ehca: Fix masking error in {,re}reg_phys_mr() IB/ehca: Supply QP token for SRQ base QPs IPoIB: Use round_jiffies() for ah_reap_task RDMA/cma: Fix deadlock destroying listen requests RDMA/cma: Add locking around QP accesses IB/mthca: Avoid alignment traps when writing doorbells mlx4_core: Kill mlx4_write64_raw()
2007-10-22[SG] Update drivers to use sg helpersJens Axboe
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2007-10-21mlx4_core: Increase command timeout for INIT_HCA to 10 secondsJack Morgenstein
The current INIT_HCA firmware command timeout is sufficient for the default number of resources (QPs, CQs, etc) being allocated, but if the HCA profile is modified to increase the amount of resources, then a spurious timeout is detected and HCA initialization fails. Increase the timeout for the INIT_HCA command to 10 seconds, which also brings it into line with all the other command timeouts. Signed-off-by: Jack Morgenstein <jackm@dev.mellanox.co.il> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2007-10-13mlx4_core: Fix infinite loop on device initializationRoland Dreier
Commit 3d73c288 ("mlx4_core: Fix section mismatches") introduced a stupid bug in device init: when some of mlx4_init_one() was split off into __mlx4_init_one(), the call from the main mlx4_init_one() function was back to mlx4_init_one() rather than to __mlx4_init_one(), which leads to an obvious infinite loop if the function is every called. Signed-off-by: Roland Dreier <rolandd@cisco.com>
2007-10-10mlx4_core: Fix section mismatchesRoland Dreier
Commit ee49bd93 ("mlx4_core: Reset device when internal error is detected") introduced some section mismatch problems when CONFIG_HOTPLUG=n, because the error recovery code tears down and reinitializes the device after everything is loaded, which ends up calling into lots of code marked __devinit and __devexit from regular .text. Fix this by getting rid of these now-incorrect section markers. Signed-off-by: Roland Dreier <rolandd@cisco.com>
2007-10-09mlx4_core: Use mmiowb() to avoid firmware commands getting jumbled upRoland Dreier
Firmware commands are sent to the HCA by writing multiple words to a command register block. Access to this block of registers is serialized with a mutex. However, on large SGI systems writes to the register block may be reordered within the system interconnect and reach the HCA in a different order than they were issued (even with the mutex). Fix this by adding an mmiowb() before dropping the mutex. This bug was observed with real workloads with the similar FW command code in the mthca driver, and adding the mmiowb() as in commit 66547550 ("IB/mthca: Use mmiowb() to avoid firmware commands getting jumbled up") was confirmed to fix the problems, so we should add the same fix to mlx4. Signed-off-by: Roland Dreier <rolandd@cisco.com>
2007-10-09mlx4_core: Increase max number of QPs per multicast group to 56Jack Morgenstein
Increase the number of QPs allowed per multicast group from 8 to 56. This allows for one QP per core on 16-core systems, which are now quite common, and allows some space for future growth. Signed-off-by: Jack Morgenstein <jackm@dev.mellanox.co.il> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2007-10-09IB/mlx4: Implement FMRsJack Morgenstein
Implement FMRs for mlx4. This is an adaptation of code from mthca. Signed-off-by: Jack Morgenstein <jackm@dev.mellanox.co.il> Signed-off-by: Michael S. Tsirkin <mst@dev.mellanox.co.il> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2007-10-09mlx4_core: Write MTTs from CPU instead with of WRITE_MTT FW commandJack Morgenstein
Write MTT entries directly to ICM from the driver (eliminating use of WRITE_MTT command). This reduces the number of FW commands needed to register an MR by at least a factor of 2 and speeds up memory registration significantly. This code will also be used to implement FMRs. Signed-off-by: Jack Morgenstein <jackm@dev.mellanox.co.il> Signed-off-by: Michael S. Tsirkin <mst@dev.mellanox.co.il> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2007-10-09mlx4_core: Fix meaning of dev->caps.reserved_mttsRoland Dreier
Everything that uses caps.reserved_mtts expects it to be a count of MTT segments, not MTT entries. So convert the value that the FW gives us to a count of segments. Signed-off-by: Roland Dreier <rolandd@cisco.com>
2007-10-09mlx4_core: Reserve the correct number of MTT segmentsRoland Dreier
Taking ilog2(dev->caps.reserved_mtts) to find out the order to pass to the MTT buddy allocator will do the wrong thing if reserved_mtts is ever not a power of 2. Be safe and use fls(dev->caps.reserved_mtts - 1). Signed-off-by: Roland Dreier <rolandd@cisco.com>
2007-10-09mlx4_core: Support ICM tables in coherent memoryJack Morgenstein
Enable having ICM tables in coherent memory, and use coherent memory for the dMPT table. This will allow writing MPT entries for MRs both via the SW2HW_MPT command and also directly by the driver for FMR remapping without needing to flush or worry about cacheline boundaries. Signed-off-by: Jack Morgenstein <jackm@dev.mellanox.co.il> Signed-off-by: Michael S. Tsirkin <mst@dev.mellanox.co.il> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2007-10-09IB/mlx4: Display misc device information under /sys/class/infiniband/Jack Morgenstein
display the following device information under /sys/class/infiniband/mlx4_X: board_id, fw_ver, hw_rev, hca_type. This patch makes this information available to userspace utilities such as ibstat and ibv_devinfo. Signed-off-by: Jack Morgenstein <jackm@dev.mellanox.co.il> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2007-10-09mlx4_core: Change capability decoding: SRC->XRCRoland Dreier
The SRC ("scalable RC") transport has been renamed to XRC ("extended RC"), to avoid having an abbreviation that is so easily confused with an abbreviation for "source." Update the HCA capability decoding output to use the new name. Signed-off-by: Roland Dreier <rolandd@cisco.com>
2007-10-09IB/mlx4: Fix up SRQ limit_watermark endiannessRoland Dreier
mlx4_srq_query() returns a big-endian 16-bit value through an int *, which screws up sparse checking. Fix this so that a CPU-endian value is returned. Signed-off-by: Roland Dreier <rolandd@cisco.com>
2007-10-09mlx4_core: Enable MSI-X by defaultMichael S. Tsirkin
Recover from MSI-X errors by automatically falling back on regular interrupt, instead of asking the user to do this manually. This makes it possible to enable MSI-X by default, and will make it possible to get rid of the msi_x module option in the future. Signed-off-by: Michael S. Tsirkin <mst@dev.mellanox.co.il> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2007-10-09mlx4_core: Don't free special QPs in QP number bitmapRoland Dreier
Special QPs are not allocated using the regular QP number bitmap, so when they are destroyed, their QP number should not be freed in the bitmap. Found by Dotan Barak of Mellanox. Signed-off-by: Roland Dreier <rolandd@cisco.com>
2007-10-09mlx4_core: Use enum value GO_BIT_TIMEOUT_MSECSDotan Barak
Rename GO_BIT_TIMEOUT to GO_BIT_TIMEOUT_MSECS for clarity, and actually use it as the go bit timeout (instead of having the define but then ignoring it and using a hard-coded 10 * HZ for the actual timeout). Signed-off-by: Dotan Barak <dotanb@dev.mellanox.co.il> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2007-08-13mlx4_core: Wait 1 second after reset before accessing deviceEli Cohen
Put a 1000 msec delay after resetting the device before attempting to do config cycles on it. Not waiting causes system hangs on some chipsets, e.g. Intel E7520, when the driver is loaded. Signed-off-by: Eli Cohen <eli@mellanox.co.il> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2007-07-28mlx4_core: Remove kfree() in mlx4_mr_alloc() error flowJack Morgenstein
mlx4_mr_alloc() doesn't actually allocate mr (it just initializes the pointer that the caller passes in), so it shouldn't free it if an error occurs. Signed-off-by: Jack Morgenstein <jackm@dev.mellanox.co.il> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2007-07-20mlx4_core: Change command token on timeoutRoland Dreier
The FW command token is currently only updated on a command completion event. This means that on command timeout, the same token will be reused for new command, which results in a mess if the timed out command *does* eventually complete. This is the same change as the patch for mthca from Michael S. Tsirkin <mst@dev.mellanox.co.il> that was just merged. It seems sensible to avoid gratuitous differences in FW command processing between mthca and mlx4. Signed-off-by: Roland Dreier <rolandd@cisco.com>
2007-07-17IB/mlx4: Increase max outstanding RDMA reads as targetJack Morgenstein
Change the maximum number of outstanding RDMA reads allowed as a target from 4 to 16 to per QP. This allows RDMA read operations to pipeline better. Pointed out by Dotan Barak and Sagi Rotem. Signed-off-by: Jack Morgenstein <jackm@dev.mellanox.co.il> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2007-07-17mlx4_core: Reset device when internal error is detectedJack Morgenstein
Reset the device when an internal error is detected. Also, detect errors by polling the error buffer rather than using interrupts. This is more robust and doesn't depend on MSI-X. Remove the old interrupt handler entirely, since we don't want to support two mechanisms for detecting internal errors. Signed-off-by: Jack Morgenstein <jackm@dev.mellanox.co.il> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2007-07-12IB/mlx4: Implement query SRQJack Morgenstein
Signed-off-by: Dotan Barak <dotanb@mellanox.co.il> Signed-off-by: Jack Morgenstein <jackm@dev.mellanox.co.il> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2007-07-12IB/mlx4: Implement query QPJack Morgenstein
Signed-off-by: Jack Morgenstein <jackm@dev.mellanox.co.il> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2007-07-09mlx4_core: Get the maximum message size from reported device capabilitiesDotan Barak
Get the maximum message size from the device capabilities returned from the QUERY_DEV_CAP firmware command, rather than hard-coding 2 GB. Signed-off-by: Dotan Barak <dotanb@dev.mellanox.co.il> Signed-off-by: Michael S. Tsirkin <mst@dev.mellanox.co.il> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2007-07-09mlx4_core: Include linux/mutex.h from mlx4.hMichael S. Tsirkin
mlx4.h uses struct mutex, so although <linux/mutex.h> seems to be pulled in indirectly by one of the headers it includes, the right thing to do is to include <linux/mutex.h> directly. Signed-off-by: Michael S. Tsirkin <mst@dev.mellanox.co.il> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2007-07-08drivers/net: fix comparisons of unsigned < 0Bill Nottingham
Recent gcc versions emit warnings when unsigned variables are compared < 0 or >= 0. Signed-off-by: Bill Nottingham <notting@redhat.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-07-02mlx4_core: Add new Mellanox device IDsJack Morgenstein
Add new IDs for PCIe gen2 devices. Signed-off-by: Jack Morgenstein <jackm@dev.mellanox.co.il> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2007-06-18IB/mlx4: Handle FW command interface rev 3Roland Dreier
Upcoming firmware introduces command interface revision 3, which changes the way port capabilities are queried and set. Update the driver to handle both the new and old command interfaces by adding a new MLX4_FLAG_OLD_PORT_CMDS that it is set after querying the firmware interface revision and then using the correct interface based on the setting of the flag. Signed-off-by: Roland Dreier <rolandd@cisco.com>
2007-06-18IB/mlx4: Handle new FW requirement for send request prefetchingRoland Dreier
New ConnectX firmware introduces FW command interface revision 2, which requires that for each QP, a chunk of send queue entries (the "headroom") is kept marked as invalid, so that the HCA doesn't get confused if it prefetches entries that haven't been posted yet. Add code to the driver to do this, and also update the user ABI so that userspace can request that the prefetcher be turned off for userspace QPs (we just leave the prefetcher on for all kernel QPs). Unfortunately, marking send queue entries this way is confuses older firmware, so we change the driver to allow only FW command interface revisions 2. This means that users will have to update their firmware to work with the new driver, but the firmware is changing quickly and the old firmware has lots of other bugs anyway, so this shouldn't be too big a deal. Based on a patch from Jack Morgenstein <jackm@dev.mellanox.co.il>. Signed-off-by: Roland Dreier <rolandd@cisco.com>
2007-06-07mlx4_core: Don't set MTT address in dMPT entries with PA setJack Morgenstein
If a dMPT entry has the PA flag (direct physical address) set, then the (unused) MTT base address field has to be set to 0. Signed-off-by: Jack Morgenstein <jackm@dev.mellanox.co.il> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2007-06-07mlx4_core: Check firmware command interface revisionRoland Dreier
HCA firmware with incompatible changes to the FW commmand interface is coming soon. Add a check of the interface revision during initialization and bail out if the firmware advertises a revision that the driver doesn't know about. This will avoid strange failures later if the driver goes on using the wrong interface revision. Signed-off-by: Roland Dreier <rolandd@cisco.com>
2007-06-07IB/mthca, mlx4_core: Fix typo in commentRoland Dreier
s/signifant/significant/ Signed-off-by: Roland Dreier <rolandd@cisco.com>
2007-06-07mlx4_core: Free catastrophic error MSI-X interrupt with correct dev_idRoland Dreier
We need to pass the same dev_id to free_irq() and request_irq(). When using MSI-X, the MLX4_EQ_CATAS interrupt uses a different dev_id from the other interrupts. Signed-off-by: Roland Dreier <rolandd@cisco.com>
2007-06-07mlx4_core: Initialize ctx_list and ctx_lock earlierRoland Dreier
We may call mlx4_dispatch_event() before mlx4_register_device() is called for a device, because for example a catastrophic error happens immediately after we enable interrupts. Therefore priv->ctx_list and priv->ctx_lock need to be initialized earlier. This bug was actually exposed by the MSI-X bug that returned IRQ numbers to drivers in reverse order, so that the first FW command interrupt looked to mlx4 like a catastrophic error. Signed-off-by: Roland Dreier <rolandd@cisco.com>
2007-06-07mlx4_core: Fix CQ context layoutEli Cohen
The reserved6 field should be 64 bits, not just 16 bits. Without this, the structure does not match the hardware layout on 32-bit architectures: the db_rec_addr field ends up at offset 52 instead of offset 56. The bug slipped by because the alignment of __be64 members ends up putting it in the right place on x86-64. Signed-off-by: Eli Cohen <eli@mellanox.co.il> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2007-05-29IB/mlx4: Fix last allocated object tracking in bitmap allocatorRoland Dreier
Set last allocated object to the object after the one just allocated before ORing in the extra top bits. Also handle the case where this wraps around. Signed-off-by: Roland Dreier <rolandd@cisco.com>
generated by cgit v1.2.3 (git 2.39.1) at 2024-07-06 14:23:38 +0000