summaryrefslogtreecommitdiff
path: root/drivers/net/wireless/ath/ath9k/htc_drv_main.c
AgeCommit message (Collapse)Author
2010-06-04ath9k_htc: Setup 5GHz channelsSujith
AR7010 is dual-band. Setup the channels and rateset for 5GHz band. Signed-off-by: Sujith <Sujith.Manoharan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-06-04ath9k_htc: Configure dual stream ratesSujith
The rate information on the target has to be updated for 2-stream devices, along with the correct chainmask. Signed-off-by: Sujith <Sujith.Manoharan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-06-04ath9k_htc: Use proper station add/remove callbacksSujith
sta_add/sta_remove are the callbacks that can sleep. Use them instead of sta_notify. Signed-off-by: Sujith <Sujith.Manoharan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-06-03ath9k_htc: Fix fair beacon distributionSujith
This patch fixes beacon distribution in IBSS mode by configuring the hardware beacon queue properly. Signed-off-by: Sujith <Sujith.Manoharan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-06-03ath9k_htc: Handle host RX disableSujith
The MIB counters used by ANI have to be disabled on the host because the FW doesn't do it on the target side. Also, flush the receive buffers before initializing RX on the target. Signed-off-by: Sujith <Sujith.Manoharan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-06-03ath9k_htc: Handle monitor interface removalSujith
The monitor interface instance on the target has to be removed before setting it to FULLSLEEP. Handle this properly. Signed-off-by: Sujith <Sujith.Manoharan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-06-03ath9k_htc: Fix locking for ps_idleSujith
ps_idle is protected by the htc_pm_lock mutex. Use it to protect the variable. Signed-off-by: Sujith <Sujith.Manoharan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-06-03ath9k_htc: Remove useless cancel_work_syncSujith
There is no need to cancel the PS work when disassociation happens. The work handlers are cancelled in the stop() callback. Signed-off-by: Sujith <Sujith.Manoharan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-06-03ath9k_htc: Fix bug in handling CONF_IDLESujith
Disable the radio only when mac80211 indicates it, through the IEEE80211_CONF_CHANGE_IDLE flag. Not handling this properly will result in multiple calls to radio_disable() even though the radio is already idle. Signed-off-by: Sujith <Sujith.Manoharan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-06-03ath9k_htc: Add PS wrappersSujith
The HW has to be awake when registers are accessed. Ensure this is so by using the PS wrappers at appropriate places. Signed-off-by: Sujith <Sujith.Manoharan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-06-03ath9k_htc: Revamp CONF_IDLE handlingSujith
This patch revamps IDLE power save handling in the driver. Two separate functions (radio enable/disable) are introduced, because the semantics of radio handling is just not the same as the start()/stop() callbacks. For example, the HW must not be disabled, instead, the PHY has to be disabled in radio_disable(). Also, the HW has to be reset properly in radio enable/disable and certain registers have to be programmed only once, in the start() callback. The radio_enable() routine doesn't need the PS wrappers since we set the HW power mode to AWAKE anyway before calling it. Signed-off-by: Sujith <Sujith.Manoharan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-06-02ath9k_htc: Enable SGI in HT20 for AR9271Sujith
Signed-off-by: Sujith <Sujith.Manoharan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-06-02ath9k_htc: Update HT configuration properlySujith
Use BSS_CHANGED_HT to handle HT parameter changes. The rate information on the target has to be updated to handle changes in HT configuration. Signed-off-by: Sujith <Sujith.Manoharan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-06-02ath9k_htc: Cleanup rate initializationSujith
This patch removes a large chunk of code dealing with rate management within the driver and simplifying things by removing the hacky method of calculating HT changes. A subsequent patch would fix this by just using BSS_CHANGED_HT from mac80211. Signed-off-by: Sujith <Sujith.Manoharan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-06-02ath9k_htc: Add queue statistics to xmit debugfs fileSujith
Signed-off-by: Sujith <Sujith.Manoharan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-05-12ath9k_htc: Lock sta_notify() callbackSujith.Manoharan@atheros.com
Since ->sta_notify() can sleep, protect the callback with a mutex. Signed-off-by: Sujith <Sujith.Manoharan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-05-10ath9k/htc_drv_main: off by one errorDan Carpenter
I changed "> ATH9K_HTC_MAX_TID" to ">= ATH9K_HTC_MAX_TID" to avoid a potential overflow. Signed-off-by: Dan Carpenter <error27@gmail.com> Acked-by: Sujith <Sujith.Manoharan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-05-10ath9k/htc_drv_main: null dereference typoDan Carpenter
This is a stray null dereference. We initialize "ista" properly later on. Signed-off-by: Dan Carpenter <error27@gmail.com> Acked-by: Sujith <Sujith.Manoharan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-05-07ath9k_htc: Handle IDLE LED properlySujith
Switch LED off/on when handling CONF_CHANGE_IDLE. Not doing this would leave the radio LED on even though the chip would be in full sleep mode. Signed-off-by: Sujith <Sujith.Manoharan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-05-07ath9k_htc: Fix beaconing in IBSS modeSujith
The current way of managing beaconing in ad-hoc mode has a subtle race - the beacon obtained from mac80211 is freed in the SWBA handler rather than the TX completion routine. But transmission of beacons goes through the normal SKB queue maintained in hif_usb, leading to a situation where __skb_dequeue() in the TX completion handler goes kaput. Fix this by simply getting a beacon from mac80211 for every SWBA and free it in its completion routine. Signed-off-by: Sujith <Sujith.Manoharan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-04-27ath9k_htc: Handle CONF_IDLE during unassociated state to save power.Vivek Natarajan
Signed-off-by: Vivek Natarajan <vnatarajan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-04-27ath9k_htc: Remove unnecessary powersave restoreSujith
Signed-off-by: Sujith <Sujith.Manoharan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-04-26ath9k_htc: Cancel running timers before disabling HWSujith
Signed-off-by: Sujith <Sujith.Manoharan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-04-16ath9k_htc: Fix sparse endian warningsSujith
This patch fixes a bunch of endian issues that were exposed by sparse. It's a miracle that the driver worked at all till now. The Lord be praised. Signed-off-by: Sujith <Sujith.Manoharan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-04-16ath9k_htc: Add dropped SKB count to debugfsSujith
Signed-off-by: Sujith <Sujith.Manoharan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-04-16ath9k_htc: Remove GPIO set on unloadSujith
There is no point in trying to set the LED pin when the module is being unloaded. The target would be reset anyway. Signed-off-by: Sujith <Sujith.Manoharan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-04-16ath9k_htc: Cleanup beacon configurationSujith
This patch cleans up beacon configuration, removing a redundant interface type check and updating beacon interval in the correct place. Signed-off-by: Sujith <Sujith.Manoharan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-04-07ath9k_htc: Configure the beacon timers once the scan is completed.Vivek Natarajan
Signed-off-by: Vivek Natarajan <vnatarajan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-04-07ath9k_htc: Add support for power save.Vivek Natarajan
Signed-off-by: Vivek Natarajan <vnatarajan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-03-31ath9k_htc: Handle TX queue overflowSujith
Stop/restart TX queues when the internal SKB queue is full. This helps handle TX better under heavy load. Signed-off-by: Sujith <Sujith.Manoharan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-03-31ath9k_htc: Fix bug in aggregation initiationSujith
Accessing the sta pointer in TX completion without approprate RCU protection is wrong. Fix this. Also, RCU protection is needed when the station's aggregation state is updated. Handle this properly. Signed-off-by: Sujith <Sujith.Manoharan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-03-31ath9k_common: Move RX filter code to ath9k_htcSujith
The calculation of RX filter is fairly different between ath9k and ath9k_htc, trying to make this common between the two drivers would result in code churn. While at it, remove the handling of PSPOLL filter, it can be added when(if) AP support is added to ath9k_htc. Signed-off-by: Sujith <Sujith.Manoharan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-03-24ath9k_htc: Fix symbol collision with ath9kSujith
Signed-off-by: Sujith <Sujith.Manoharan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-03-23ath9k_htc: Support for AR9271 chipset.Sujith
Features: * Station mode * IBSS mode * Monitor mode * Legacy support * HT support * TX/RX 11n Aggregation * HW encryption * LED * Suspend/Resume For more information: http://wireless.kernel.org/en/users/Drivers/ath9k_htc Signed-off-by: Sujith <Sujith.Manoharan@atheros.com> Signed-off-by: Vasanthakumar Thiagarajan <vasanth@atheros.com> Signed-off-by: Senthil Balasubramanian <senthilkumar@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
generated by cgit v1.2.3 (git 2.39.1) at 2024-09-02 21:48:54 +0000