summaryrefslogtreecommitdiff
path: root/drivers/net/wireless/libertas/host.h
AgeCommit message (Collapse)Author
2010-07-27libertas: convert PS_MODE to a direct commandDan Williams
Powersave looks like it got broken at some point but we'll fix that up when the command submission stuff is more understandable, which this series helps to do. That said, this patch should not further break powersave. Signed-off-by: Dan Williams <dcbw@redhat.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-07-27libertas: convert CMD_FWT_ACCESS to a direct commandDan Williams
Slightly different approach here since there are so many arguments to the firmware command. Just let the caller fill them in before pushing the command to the firmware. Signed-off-by: Dan Williams <dcbw@redhat.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-07-27libertas: convert Mesh Blinding Table access to a direct commandDan Williams
Signed-off-by: Dan Williams <dcbw@redhat.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-07-27libertas: convert register access to direct commandsDan Williams
Signed-off-by: Dan Williams <dcbw@redhat.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-07-27libertas: convert LED_GPIO_CTRL to a direct commandDan Williams
Signed-off-by: Dan Williams <dcbw@redhat.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-07-27libertas: remove Beacon ControlDan Williams
For now; it's a pretty easy command to hook up and whenever OLPC figures out how they want the userspace interface to look (ie, not iwpriv commands) we can easily add it back in. Since the cfg80211 conversion it wasn't working anyway. Signed-off-by: Dan Williams <dcbw@redhat.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-07-27libertas: remove unused Automatic Frequency Control commandDan Williams
It hasn't been hooked up to anything in a long time and it's not even listed in any of the firmware documentation I have (and I have v5.1, v8, v9, and v10). Signed-off-by: Dan Williams <dcbw@redhat.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-07-27libertas: remove unused indirect TPC_CFG command leftoversDan Williams
These were no longer used but were left around; Transmit Power Control is done through the lbs_set_tpc_cfg() function. Signed-off-by: Dan Williams <dcbw@redhat.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-07-27libertas: convert 11D_DOMAIN_INFO to a direct commandDan Williams
Signed-off-by: Dan Williams <dcbw@redhat.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-07-27libertas: clean up RSSI commandDan Williams
Convert to a full direct command; previous code rolled a direct command by hand but left the original indirect command code intact but disabled. Signed-off-by: Dan Williams <dcbw@redhat.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-07-27libertas: clean up MONITOR_MODE commandDan Williams
Convert to a full direct command; previous code rolled a direct command by handle but left the original indirect command code lying around. Signed-off-by: Dan Williams <dcbw@redhat.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-07-27Merge branch 'master' of ↵John W. Linville
git://git.kernel.org/pub/scm/linux/kernel/git/holtmann/bluetooth-next-2.6 Conflicts: drivers/net/wireless/iwlwifi/iwl-commands.h
2010-07-14libertas: convert new uses of __attribute__ ((packed)) to __packedJohn W. Linville
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-07-01Merge branch 'master' of ↵David S. Miller
git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-next-2.6 Conflicts: drivers/net/wireless/libertas/host.h
2010-06-23Libertas: Added 11d support using cfg80211Kiran Divekar
Added 11d support for libertas driver using cfg80211. This is based on Holger Shurig's initial work to add cfg80211 support libertas. (https://patchwork.kernel.org/patch/64286/) Please let us know, if there are any improvements comments. Code is added to send 11d enable command to firmware while initialisation and pass 11d specific information to firmware when notifier handler is called by cfg80211. Signed-off-by: Amitkumar Karwar <akarwar@marvell.com> Signed-off-by: Kiran Divekar <dkiran@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-06-03drivers/net: use __packed annotationEric Dumazet
cleanup patch. Use new __packed annotation in drivers/net/ Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-10-27libertas: remove "struct cmd_ds_gen"Holger Schurig
It was only used as a source for S_DS_GEN, but the size of this struct is equal to the size of "struct cmd_header". Signed-off-by: Holger Schurig <hs4233@mail.mn-solutions.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-10-27libertas: remove handling for CMD_GET_TSFHolger Schurig
... which just resided as an old-style command in cmd/cmdresp, but was nowhere useed. If we ever need it, we can re-add it as a newstyle command. Signed-off-by: Holger Schurig <hs4233@mail.mn-solutions.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-10-27libertas: change IW_ESSID_MAX_SIZE -> IEEE80211_MAX_SSID_LENHolger Schurig
Signed-off-by: Holger Schurig <hs4233@mail.mn-solutions.de> Acked-by: Dan Williams <dcbw@redhat.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-10-27libertas: remove unused 11d.h as well, priv->countryinfoHolger Schurig
Signed-off-by: Holger Schurig <hs4233@mail.mn-solutions.de> Acked-by: Dan Williams <dcbw@redhat.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-10-27libertas: remove unused lbs_cmd_802_11_inactivity_timeout()Holger Schurig
Signed-off-by: Holger Schurig <hs4233@mail.mn-solutions.de> Acked-by: Dan Williams <dcbw@redhat.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-10-27libertas: harmonize cmd.hHolger Schurig
* move declarations for functions of cmd.c/cmdresp.c into cmd.h * move declarations from cmd.h that are in main.c to decl.h * group command functions Signed-off-by: Holger Schurig <hs4233@mail.mn-solutions.de> Acked-by: Dan Williams <dcbw@redhat.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-10-27libertas: cleanup host.h and hostcmd.hHolger Schurig
Also remove some unused definitions and make tab usage consistent. Signed-off-by: Holger Schurig <hs4233@mail.mn-solutions.de> Acked-by: Dan Williams <dcbw@redhat.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-10-07libertas: Add auto deep sleep support for SD8385/SD8686/SD8688Amitkumar Karwar
Add timer based auto deep sleep feature in libertas driver which can be configured using iwconfig command. This is tested on SD8688, SD8686 cards with firmware versions 10.38.1.p25, 9.70.4.p0 respectively on 32-bit and 64-bit platforms. Tests have been done for USB/CS cards to make sure that the patch won't break USB/CS code. We didn't test the if_spi driver. Signed-off-by: Amitkumar Karwar <akarwar@marvell.com> Signed-off-by: Bing Zhao <bzhao@marvell.com> Acked-by: Dan Williams <dcbw@redhat.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-05-22libertas: implement function init/shutdown commands for SD8688Bing Zhao
SD8688 is a WLAN/Bluetooth combo chip and both functions are supported in a single firmware image. FUNC_INIT and FUNC_SHUTDOWN commands are implemented to utilize the multiple function feature. When SD8688 card is inserted, the firmware image should be downloaded only once through either WLAN function (Libertas driver) or Bluetooth function (Bluetooth driver). This patch adds function init/shutdown for SD8688 WLAN function only. Signed-off-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-04-22libertas: support mesh for various firmware versionsBing Zhao
CMD_MESH_CONFIG command ID and a couple of structure members in TxPD, RxPD have been changed in firmware version 10.x.y.z and newer. Signed-off-by: Kiran Divekar <dkiran@marvell.com> Signed-off-by: Bing Zhao <bzhao@marvell.com> Acked-by: Dan Williams <dcbw@redhat.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-01-29libertas: Update libertas core with GSPI constantsColin McCabe
Add GSPI constants to libertas core. Fix misleading comment in lbs_setup_firmware. Signed-off-by: Colin McCabe <colin@cozybit.com> Signed-off-by: Andrey Yurovsky <andrey@cozybit.com> Acked-by: Dan Williams <dcbw@redhat.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-12-12libertas: Create sysfs entry for changing the mesh probe response limitAnna Neal
This patch adds the ability to change the number of probe response retries sent by the mesh interface. In dense networks it is recommended to change this value to zero to reduce traffic congestion. Signed-off-by: Anna Neal <anna@cozybit.com> Signed-off-by: Andrey Yurovsky <andrey@cozybit.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-11-21libertas: Fine grained configuration of wake-on-lan.Anna Neal
Based on a patch from Shailendra Govardhan <shailen@marvell.com>. This patch allows implementation of more specific wake-on-lan rules than those of ethtool. Please note that only firmware 5.110.22.p20 and above supports this feature. This patch only implements the driver/firmware interface, not the userspace/driver interface. Signed-off-by: Anna Neal <anna@cozybit.com> Signed-off-by: Javier Cardona <javier@cozybit.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-09-15libertas: convert SNMP_MIB to a direct commandDan Williams
And support setting both long and short retries independently. Signed-off-by: Dan Williams <dcbw@redhat.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-09-11libertas: Improvements on automatic tx power control via SIOCSIWTXPOW.master-2008-09-11Anna Neal
iwconfig txpower can now be used to set tx power to fixed or auto. If set to auto the default firmware settings are used. The command CMD_802_11_PA_CFG is only sent to older firmware, as Dan Williams noted the command was no longer supported in firmware V9+. Signed-off-by: Anna Neal <anna@cozybit.com> Signed-off-by: Javier Cardona <javier@cozybit.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-08-29libertas: convert CMD_802_11_RADIO_CONTROL to a direct commandDan Williams
and return errors for operations like join & scan that aren't possible when the radio is turned off. Signed-off-by: Dan Williams <dcbw@redhat.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-08-29libertas: convert CMD_802_11_DEAUTHENTICATE to a direct commandDan Williams
and remove DISASSOCIATE because it's not in any of the specs and has never been used. Signed-off-by: Dan Williams <dcbw@redhat.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-08-29libertas: convert CMD_802_11_RF_TX_POWER to a direct commandDan Williams
And while we're at it, grab min/max TX power from the firmware and use that to validate incoming TX power requests from WEXT. Signed-off-by: Dan Williams <dcbw@redhat.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-05-21libertas: Extend MESH_CONFIG command to access non-volatile configurationJavier Cardona
This patch is based on a patch from Shailendra Govardhan and Brian Cavagnolo. It extends the MESH_CONFIG command to configure non-volatile parameters on libertas devices that support them (e.g. OLPC Active Antenna). This patch only implements the driver/firmware interface. See http://dev.laptop.org/ticket/6823 for minimal testing results and known issues. Signed-off-by: Javier Cardona <javier@cozybit.com> Signed-off-by: David Woodhouse <dwmw2@infradead.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-03-27libertas: remove CMD_802_11_PWR_CFGHolger Schurig
This has nowhere been used. Note: in the firmware manual this was documented as CMD_802_11_PA_CFG. If we ever need it, we can/should re-implement it as a direct command. Signed-off-by: Holger Schurig <hs4233@mail.mn-solutions.de> Acked-by: Dan Williams <dcbw@redhat.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-03-25libertas: remove some unused commandsHolger Schurig
Neither CMD_802_11_PAIRWISE_TSC nor CMD_802_11_GROUP_TSC is used or documented. It might have something to do with TKIP sequence counters, but that's just an educated guess. Remove all occurences of them. CMD_CODE_DNLD is also neither used nor documented. Signed-off-by: Holger Schurig <hs4233@mail.mn-solutions.de> Acked-by: Dan Williams <dcbw@redhat.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-01-28libertas: allow for PS mode to be disabled when firmware doesn't support itDavid Woodhouse
Otherwise, we go into an endless busy loop trying to enable PS mode when the command queue is empty, dealing with the error response, and then trying to enable PS mode again because the command queue is empty.... it doesn't really save much power. Signed-off-by: David Woodhouse <dwmw2@infradead.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-01-28libertas: handle HOST_AWAKE event by sending WAKEUP_CONFIRM commandDavid Woodhouse
lbs_send_confirmwake() is a bit ugly but matches the way we confirm sleep. We'll deal with that whole thing later. Signed-off-by: David Woodhouse <dwmw2@infradead.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-01-28libertas: add SLEEP_PERIOD and FW_WAKE_METHOD command definitionsDavid Woodhouse
Signed-off-by: David Woodhouse <dwmw2@infradead.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-01-28libertas: add lbs_host_sleep_cfg() command functionDavid Woodhouse
Signed-off-by: David Woodhouse <dwmw2@infradead.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-01-28libertas: whitespace cleanup in host.hDavid Woodhouse
Signed-off-by: David Woodhouse <dwmw2@infradead.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-01-28libertas: add lbs_mesh sysfs attribute for enabling meshDavid Woodhouse
Signed-off-by: David Woodhouse <dwmw2@infradead.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-01-28libertas: fix case of FWT_ACCESS_LIST_ROUTE and FWT_ACCESS_LIST_NEIGHBOR ↵Dan Williams
commands Signed-off-by: Dan Williams <dcbw@redhat.com> Signed-off-by: David Woodhouse <dwmw2@infradead.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-01-28libertas: wait for 'firmware ready' event from firmware after loadingDavid Woodhouse
Signed-off-by: David Woodhouse <dwmw2@infradead.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-01-28libertas: less eventcause shiftsHolger Schurig
* only shift eventcause once * convert mac events to decimal, as this is what the firmware manual uses in section 6.1, too Signed-off-by: Holger Schurig <hs4233@mail.mn-solutions.de> Acked-by: Dan Williams <dcbw@redhat.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-01-28libertas: rework event subscriptionHolger Schurig
This patch moves re-works the implementation of event subscription via debugfs. For this: * it tells cmd.c and cmdresp.c about CMD_802_11_SUBSCRIBE_EVENT * removes lots of low-level cmd stuff from debugfs.c * create unified functions to read/write snr, rssi, bcnmiss and failcount * introduces #define's for subscription event bitmask values * add a function to search for a specific element in an IE (a.k.a. TLV) * add a function to find out the size of the TLV. This is needed because lbs_prepare_and_send_command() has an argument for a data buffer, but not for it's lengths and TLVs can be, by definition, vary in size. * fix a bug where it was not possible to disable an event Signed-off-by: Holger Schurig <hs4233@mail.mn-solutions.de> Acked-by: Dan Williams <dcbw@redhat.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-01-28libertas: configurable beacon intervalBrajesh Dave
Requires firmware version 5.110.19.p0 or newer, available here: http://dev.laptop.org/pub/firmware/libertas/ Signed-off-by: Ashish Shukla <ashishs@marvell.com> Signed-off-by: Javier Cardona <javier@cozybit.com> Signed-off-by: Dan Williams <dcbw@redhat.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-01-28libertas: move to uniform lbs_/LBS_ namespaceHolger Schurig
This patch unifies the namespace of variables, functions defines and structures. It does: - rename libertas_XXX to lbs_XXX - rename LIBERTAS_XXX to lbs_XXX - rename wlan_XXX to lbs_XXX - rename WLAN_XXX to LBS_XXX (but only those that were defined in libertas-local *.h files, e.g. not defines from net/ieee80211.h) While passing, I fixed some checkpatch.pl errors too. Signed-off-by: Holger Schurig <hs4233@mail.mn-solutions.de> Acked-by: Dan Williams <dcbw@redhat.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2007-10-10[PATCH] libertas: fix u8 constantHolger Schurig
Don't write constants that are (per documentation and struct) u8 as 0x0001, use 0x01 instead. Also remove an useless cast. Signed-off-by: Holger Schurig <hs4233@mail.mn-solutions.de> Acked-By: Dan Williams <dcbw@redhat.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
generated by cgit v1.2.3 (git 2.39.1) at 2024-07-21 01:35:10 +0000