summaryrefslogtreecommitdiff
path: root/drivers/net/wireless
AgeCommit message (Collapse)Author
2012-02-17iwlwifi: trace debug messagesJohannes Berg
Make iwlwifi record all debug messages into tracing, even if debug_level is not enabled. Due to the lack of APIs, the debug messages are now recorded up to a max length of 100, the only one above that is the RXON which is not needed if you trace the commands as well as it only dumps the command contents. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Wey-Yi W Guy <wey-yi.w.guy@intel.com>
2012-02-17iwlwifi: added reply data to testmode HCMD sendAmit Beka
The testmode command for host command send now replies with a nl80211 message and the response it recieved from the device. This does not change the API directly, but adds a reply to the testmode call. Signed-off-by: Amit Beka <amit.beka@intel.com> Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com>
2012-02-17iwlwifi: testmode new indirect RW APIAmit Beka
Replaced the old SRAM and periphery indirect access functions with a unified indirect memory access functions. These include new IWL_TM_CMDs for buffer read/write/dump which replace the SRAM read/dump commands, but the API for IWL_TM_CMD_INDIRECT_REG read/write will now not be supported (returns error). This also handles writing to periphery registers in 1-3 bytes. Requires the corresponding patch in the library for the API change. Signed-off-by: Amit Beka <amit.beka@intel.com> Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com>
2012-02-17iwlwifi: log as error when error detectedWey-Yi Guy
A lot of error conditions in testmode log as IWL_DEBUG_INFO which is not logged by default. Change it Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com>
2012-02-15Merge branch 'master' of ↵John W. Linville
git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless Conflicts: net/mac80211/debugfs_sta.c net/mac80211/sta_info.h
2012-02-15ath9k: stop on rates with idx -1 in ath9k rate control's .tx_statusPavel Roskin
Rate control algorithms are supposed to stop processing when they encounter a rate with the index -1. Checking for rate->count not being zero is not enough. Allowing a rate with negative index leads to memory corruption in ath_debug_stat_rc(). One consequence of the bug is discussed at https://bugzilla.redhat.com/show_bug.cgi?id=768639 Signed-off-by: Pavel Roskin <proski@gnu.org> Cc: stable@vger.kernel.org Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-02-15mwifiex: clear previous security setting during associationAmitkumar Karwar
Driver maintains different flags for WEP, WPA, WPA2 security modes. Appropriate flag is set using security information provided in connect request. mwifiex_is_network_compatible() routine uses them to check if driver's setting is compatible with AP. Association is aborted if the routine fails. For some corner cases, it is observed that association is failed even for valid security information based on association history. This patch fixes the problem by clearing previous security setting during each association. We should set WEP key provided in connect request as default tx key. This missing change is also added here. Signed-off-by: Amitkumar Karwar <akarwar@marvell.com> Signed-off-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-02-09rtlwifi: Modify rtl_pci_init to return 0 on successSimon Graham
Fixes problem where caller would think routine succeeded when it failed leading to divide by zero panic. Signed-off-by: Simon Graham <simon.graham@virtualcomputer.com> Acked-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-02-09rtlwifi: Modify rtl_pci_init to return 0 on successJohn W. Linville
Fixes problem where caller would think routine succeeded when it failed leading to divide by zero panic. (This also reverts an earlier attempt, commit 42bc0c97 "rtlwifi: Return correct failure code on error". -- JWL) Signed-off-by: Simon Graham <simon.graham@virtualcomputer.com> Acked-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-02-08rtlwifi: Return correct failure code on errorSimon Graham
Callers of rtl_pci_init expect zero to be returned on error. Returning the error code leads to, amongst other things, divide by zero panics attempting to use the ring size that is set to zero. Signed-off-by: Simon Graham <simon.graham@virtualcomputer.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-02-08rtlwifi: Handle previous allocation failures when freeing device memorySimon Graham
Handle previous allocation failures when freeing device memory Signed-off-by: Simon Graham <simon.graham@virtualcomputer.com> Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Cc: Stable <stable@vger.kernel.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-02-08rt2x00: Correctly set txmixer_gain in RT3572 channel switching.Gertjan van Wingerde
Align with the v2.5.0.0 Ralink RT3572 driver. Save the EEPROM txmixer_gain values inside the rt2800 driver data structure and use it throughout the code. Signed-off-by: Gertjan van Wingerde <gwingerde@gmail.com> Acked-by: Stanislaw Gruszka <sgruszka@redhat.com> Acked-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-02-08rt2x00: Fix RT3572 channel switch RFCSR 7 programming.Gertjan van Wingerde
Align with the v2.5.0.0 Ralink RT3572 driver. Signed-off-by: Gertjan van Wingerde <gwingerde@gmail.com> Acked-by: Stanislaw Gruszka <sgruszka@redhat.com> Acked-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-02-08rt2x00: Align RT3572 channel switch RFCSR 1 programming with Ralink driver.Gertjan van Wingerde
Align with the v2.5.0.0 Ralink RT3572 driver. Signed-off-by: Gertjan van Wingerde <gwingerde@gmail.com> Acked-by: Stanislaw Gruszka <sgruszka@redhat.com> Acked-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-02-08rt2x00: Fix RFCSR 12 & 13 programming on RT3572 channel switching.Gertjan van Wingerde
Align with v2.5.0.0 Ralink RT3572 driver for 2.4GHz band channel switch. Signed-off-by: Gertjan van Wingerde <gwingerde@gmail.com> Acked-by: Stanislaw Gruszka <sgruszka@redhat.com> Acked-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-02-08rt2x00: Use saved BBP 25 and 26 values when configuring channel on RT3572.Gertjan van Wingerde
This brings the rt2800 channel switching code for RT3572 closer to the v2.5.0.0 Ralink RT3572 driver. Signed-off-by: Gertjan van Wingerde <gwingerde@gmail.com> Acked-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-02-08rt2x00: Update comment on freq_offset field in struct rt2x00_dev.Gertjan van Wingerde
The comment states that the field is only used for rt61pci and rt73usb. However, it is now used by rt2800pci and rt2800usb as well, so the comment is not correct anymore. Update the comment to not state any low-level drivers anymore. Signed-off-by: Gertjan van Wingerde <gwingerde@gmail.com> Acked-by: Stanislaw Gruszka <sgruszka@redhat.com> Acked-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-02-08rt2x00: Use struct rt2x00_dev driver data in rt2800{pci,usb}.Gertjan van Wingerde
Start using the struct rt2x00_dev driver data in rt2800 for the calibration data. Signed-off-by: Gertjan van Wingerde <gwingerde@gmail.com> Acked-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-02-08rt2x00: Introduce concept of driver data in struct rt2x00_dev.Gertjan van Wingerde
We are getting more and more fields in struct rt2x00_dev that are specific to one or two of the low-level drivers. Instead of putting these fields inside the main structure and thus clobbering all low-level drivers with these fields, introduce the concept of driver data inside struct rt2x00_dev, whose size is indicated by the low-level driver and which can be populated by the low-level driver. Signed-off-by: Gertjan van Wingerde <gwingerde@gmail.com> Acked-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-02-07zd1211rw: firmware needs duration_id set to zero for non-pspoll framesTomas Vanek
Some devices (iwl5100) cannot connect to zd1211rw based AP. It appears that zd1211 firmware messes up duration_id field if it is not set to zero by driver. Sniffing traffic shows that zd1211 is transmitting frames with duration_id bits 14 and 15 set and other bits appearing random. Setting duration_id at driver to zero results zd1211 outputting sane duration_id. This means that firmware is setting correct values itself and expects duration_id to be zero in first place. Looking at vendor driver shows that only PSPoll frames have duration_id set by driver, for other frames duration_id left zero. Original bug-report and attached patch at: http://sourceforge.net/mailarchive/message.php?msg_id=28759111 Reported-by: Tomas Vanek <Tomas.Vanek@fbl.cz> [modified original patch from bug-report, added check for pspoll frame] Signed-off-by: Jussi Kivilinna <jussi.kivilinna@mbnet.fi> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-02-06iwlegacy: remove set_hw_params callbackStanislaw Gruszka
We do not need that callback, settings parameters can be done locally. Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-02-06iwlegacy: remove struct il_tx_infoStanislaw Gruszka
It's just wrapper to sk_buff pointers ... Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-02-06iwlegacy: merge il_base_params into il_cfgStanislaw Gruszka
Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-02-06iwlegacy: move ops out of configStanislaw Gruszka
Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-02-06iwlegacy: get rid of ctx structureStanislaw Gruszka
Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-02-06iwlegacy: remove il_setup_interface()Stanislaw Gruszka
Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-02-06iwlegacy: get rid of ctx->is_activeStanislaw Gruszka
Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-02-06iwlegacy: get rid of ctx->ac_to_queueStanislaw Gruszka
Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-02-06iwlegacy: get rid of ctx->ac_to_fifoStanislaw Gruszka
Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-02-06iwlegacy: move ht out of ctx structureStanislaw Gruszka
Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-02-06iwlegacy: move qos_data out of ctx structureStanislaw Gruszka
Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-02-06iwlegacy: remove ctx interface_modesStanislaw Gruszka
Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-02-06iwlegacy: get rid of ctx->station_flagsStanislaw Gruszka
Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-02-06iwlegacy: move wep_keys out of contextStanislaw Gruszka
Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-02-06iwlegacy: get rid of mcast_queueStanislaw Gruszka
Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-02-06iwlegacy: get rid of ctxidStanislaw Gruszka
Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-02-06iwlegacy: get rid of *_devtypeStanislaw Gruszka
Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-02-06iwlegacy: move bcast_sta_id to hw_paramsStanislaw Gruszka
Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-02-06iwlegacy: get rid of ap_sta_idStanislaw Gruszka
Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-02-06iwlegacy: get rid of wep_key_cmdStanislaw Gruszka
Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-02-06iwlegacy: get rid of qos_cmdStanislaw Gruszka
Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-02-06iwlegacy: get rid of rxon_assoc_cmdStanislaw Gruszka
Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-02-06iwlegacy: get rid of ctx->rxon_timing_cmdStanislaw Gruszka
Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-02-06iwlegacy: get rid of ctx->rxon_cmdStanislaw Gruszka
Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-02-06iwlegacy: move rxon commands out of ctx structureStanislaw Gruszka
Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-02-06mwifiex: update correct dtim_period in dump_station()Amitkumar Karwar
Earlier we were using dtim period extracted from scan response buffer provided by FW in scan operation. But it is observed that sometimes the buffer doesn't contain dtim period tlv, and wrong value (0) was sent to user space. After association FW will start listening to beacon frames of connected AP and store dtim period. Therefore we can get it from FW in dump_station() instead of using wrong value obtained in scanning. Redundant code after adapting new approach for dtim period is also removed in this patch. Signed-off-by: Amitkumar Karwar <akarwar@marvell.com> Signed-off-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-02-06mwifiex: cleanup in snmp_mib command preparation codeAmitkumar Karwar
1) Remove unnecessary switch case usage. 2) Replace "X=cpu_to_le16(le16_to_cpu(X) + Y)" by "le16_add_cpu(X, Y)" 3) Declare "ul_temp" variable as u16 instead of u32 to avoid unnecessary typecasting Signed-off-by: Amitkumar Karwar <akarwar@marvell.com> Signed-off-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-02-06rtlwifi: Fix PCI probe error path orphaned memoryTim Gardner
Memory allocated by ieee80211_alloc_hw() will get orphaned if any subsequent initializations fail. Also don't pci_set_drvdata(pdev, NULL) until just before disabling the PCI device. Functions called by rtl_deinit_core(hw) may eventually need the context (when its actually implemented). Cc: Larry Finger <Larry.Finger@lwfinger.net> Cc: Chaoming Li <chaoming_li@realsil.com.cn> Cc: John W. Linville <linville@tuxdriver.com> Cc: linux-wireless@vger.kernel.org Cc: netdev@vger.kernel.org Cc: linux-kernel@vger.kernel.org Signed-off-by: Tim Gardner <tim.gardner@canonical.com> Acked-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-02-06mwifiex: enable HT operating modeAmitkumar Karwar
This patch sets default adapter channel_type as HT. Hence the device will opearate in HT mode. Signed-off-by: Amitkumar Karwar <akarwar@marvell.com> Signed-off-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-02-06mwifiex: fix NULL pointer dereference in set_channel()Amitkumar Karwar
In set_channel() callback handler, "priv" pointer is derived from net_device. Sometimes net_device pointer coming from the stack is NULL which causes kernel crash. This patch fixes the problem by deriving "priv" from wiphy when net_device pointer is NULL. Signed-off-by: Amitkumar Karwar <akarwar@marvell.com> Signed-off-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
generated by cgit v1.2.3 (git 2.39.1) at 2024-08-05 05:58:41 +0000