summaryrefslogtreecommitdiff
path: root/drivers/net/wireless
AgeCommit message (Collapse)Author
2010-07-27libertas: remove unused Automatic Frequency Control commandDan Williams
It hasn't been hooked up to anything in a long time and it's not even listed in any of the firmware documentation I have (and I have v5.1, v8, v9, and v10). Signed-off-by: Dan Williams <dcbw@redhat.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-07-27libertas: remove unused indirect TPC_CFG command leftoversDan Williams
These were no longer used but were left around; Transmit Power Control is done through the lbs_set_tpc_cfg() function. Signed-off-by: Dan Williams <dcbw@redhat.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-07-27libertas: convert 11D_DOMAIN_INFO to a direct commandDan Williams
Signed-off-by: Dan Williams <dcbw@redhat.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-07-27libertas: clean up RSSI commandDan Williams
Convert to a full direct command; previous code rolled a direct command by hand but left the original indirect command code intact but disabled. Signed-off-by: Dan Williams <dcbw@redhat.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-07-27libertas: clean up MONITOR_MODE commandDan Williams
Convert to a full direct command; previous code rolled a direct command by handle but left the original indirect command code lying around. Signed-off-by: Dan Williams <dcbw@redhat.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-07-27rt2500usb: disallow to set WEP key with non zero indexStanislaw Gruszka
On our hardware (050d:7050 Belkin Components F5D7050 Wireless G Adapter), setting any WEP key with non zero index, cause rx frames corruption. Note: perhaps (I did not check) this can be fixed differently - by using hw_key_idx the same as true MAC key index. But according to the comment in rt2x00mac_set_key(): "the hardware requires keys to be assigned in correct order (When key 1 is provided but key 0 is not, then the key is not found by the hardware during RX)" this will be quite problematic. Since WEP should not be used, disabling hardware crypto offload for it will not hurt much. Beside static one key WEP will still be offloaded. Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com> Acked-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-07-27rt2500usb: truly disable encryption when initializeStanislaw Gruszka
Without cipher part nullify of TXRX_CSR0 register we can receive corrupted frames (removed IV or IVC), after reloading rt2500usb module with nohwcrypt=1 option, if previous some keys were configured into the hardware. Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com> Acked-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-07-27rt2500usb: write keys to proper registersStanislaw Gruszka
Fix rt2500usb hardware encryption broken by commit 96b61bafe22b2f2abcc833d651739edb977f1b1e "rt2x00: Clean up USB vendor request buffer functions" Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com> Acked-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-07-27ath9k: remove unused base_index from rate table.Senthil Balasubramanian
base index is not used anymore and so remove it. Signed-off-by: Senthil Balasubramanian <senthilkumar@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-07-27ath9k: Fix incorrect user ratekbs of MCS15 ShortGISenthil Balasubramanian
The user ratekbs of MCS15 ShortGI is incorrect and can not be lesser than MCS15 rate. This incorrect rate may affect switching to higher rates as the rate control algorithm always finds MCS15 is better than MCS15 ShortGI and results in lower throughput. Fix this by feeding the correct user ratekbs for MCS15 ShortGI rate. This issue affects 3 stream case very badly as the 3 stream rates are not used at all once we scale down to MCS15 from 3 stream rates. Signed-off-by: Senthil Balasubramanian <senthilkumar@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-07-27ath9k: Add three stream rate control support for AR938X.Senthil Balasubramanian
This patch adds 3 stream rate control support for AR938X family chipsets which supports 3 streams. Signed-off-by: Senthil Balasubramanian <senthilkumar@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-07-27ath9k: Introduce bit masks for valid and valid_single_stream.Senthil Balasubramanian
replace valid and valid_single_stream in rate table with bit masks and reorganize the code so adding 3x3 rate control would be easier. Signed-off-by: Senthil Balasubramanian <senthilkumar@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-07-27p54: Added get_survey callback in order to get channel noiseJohn W. Linville
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-07-27Merge branch 'master' of ↵John W. Linville
git://git.kernel.org/pub/scm/linux/kernel/git/holtmann/bluetooth-next-2.6 Conflicts: drivers/net/wireless/iwlwifi/iwl-commands.h
2010-07-26rt2x00: Fix regression for rt2500pcimaster-2010-07-26Ivo van Doorn
Since commit: commit f1aa4c541e98afa8b770a75ccaa8504d0bff44a7 Author: Ivo van Doorn <ivdoorn@gmail.com> Date: Tue Jun 29 21:38:55 2010 +0200 rt2x00: Write the BSSID to register when interface is added mananged mode in rt2500pci was broken, due to intf->bssid containing random data rather then the expected 00:00:00:00:00:00 This is corrected by sending the BSSID to rt2x00lib_config_intf only in AP mode where the bssid is set to a valid value. Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> Acked-by: Helmut Schaa <helmut.schaa@googlemail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-07-26ath9k_hw: simplify noisefloor calibration chainmask calculationFelix Fietkau
The noisefloor array index always corresponds to the rx chain number it belongs to (with an offset of 3 for the extension chain). It's much simpler (and actually more correct) to directly use the chainmask to calculate the bitmask for the noisefloor array, instead of using these weird chip revision checks and hardcoded mask values. Signed-off-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-07-26ath9k_hw: fix a small typo in the noisefloor calibration debug codeFelix Fietkau
In the noisefloor array, the extension channel values start at index 3 Signed-off-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-07-26ath9k_hw: fix invalid extension channel noisefloor readings in HT20Felix Fietkau
When the hardware is configured in HT20 mode, noise floor readings for the extension channel often return invalid values, which keep the values in the NF history buffer at the hardware-specific maximum limit. Fix this by discarding the extension channel values when in HT20 mode. Signed-off-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-07-26ath9k: fix yet another buffer leak in the tx aggregation codeFelix Fietkau
When an aggregation session is being cleaned up, while the tx status for some frames is being processed, the TID is flushed and its buffers are sent out. Unfortunately that left the pending un-acked frames unprocessed, thus leaking buffers. Fix this by reordering the code so that those frames are processed first, before the TID is flushed. Signed-off-by: Felix Fietkau <nbd@openwrt.org> Cc: stable@kernel.org Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-07-26libertas: precedence bugDan Carpenter
Negate has precedence over comparison so the original test was always false. (Neither 0 nor 1 are equal to NL80211_IFTYPE_MONITOR). Signed-off-by: Dan Carpenter <error27@gmail.com> Acked-by: Dan Williams <dcbw@redhat.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-07-26ath9k: Fix inconsistency between txq->stopped and the actual queue stateVasanthakumar Thiagarajan
Sometimes txq state(txq->stopped) can be marked as started but the actual queue may not be started (in ATH_WIPHY_SCAN state, for example). Fix this. Signed-off-by: Vasanthakumar Thiagarajan <vasanth@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-07-26ath5k: snprintf() returns largish valuesDan Carpenter
snprintf() returns the number of characters that would have been written (not counting the NUL character). So we can't use it as the limiter to simple_read_from_buffer() without capping it first at sizeof(buf). Signed-off-by: Dan Carpenter <error27@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-07-26ath9k: snprintf() returns largish valuesDan Carpenter
The snprintf() function returns the number of characters that would have been written (not counting the NUL character on the end). It could potentially be larger than the size of the buffer. Signed-off-by: Dan Carpenter <error27@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-07-26drivers/net/wireless/wl12xx: Use kmemdupJulia Lawall
Use kmemdup when some other buffer is immediately copied into the allocated region. A simplified version of the semantic patch that makes this change is as follows: (http://coccinelle.lip6.fr/) // <smpl> @@ expression from,to,size,flag; statement S; @@ - to = \(kmalloc\|kzalloc\)(size,flag); + to = kmemdup(from,size,flag); if (to==NULL || ...) S - memcpy(to, from, size); // </smpl> Signed-off-by: Julia Lawall <julia@diku.dk> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-07-26lib80211: remove unused host_build_iv optionJohn W. Linville
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-07-26iwlwifi: assume vif is NULL for internal scans and non-NULL otherwiseJohn W. Linville
The current practice of checking vif for NULL in one place but not another seems to confuse some static checkers, smatch in particular. Since vif will only be NULL in the case of internal scans, adjust the checks accordingly. Reported-by: Dan Carpenter <error27@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-07-26rtl8180: silence "dubious: x | !y" sparse warningJohn W. Linville
CHECK drivers/net/wireless/rtl818x/rtl8180_rtl8225.c drivers/net/wireless/rtl818x/rtl8180_rtl8225.c:53:33: warning: dubious: x | !y The existing code is clever and works fine, but it's not worth even a single line of Sparse warning SPAM... Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-07-26rtl8180: improve signal reporting for actual rtl8180 hardwareJohn W. Linville
Adapted from Realtek-provided driver... Signed-off-by: John W. Linville <linville@tuxdriver.com> Tested-by: Pauli Nieminen <suokkos@gmail.com>
2010-07-26wl1251: fix sparse-generated warningsJohn W. Linville
CHECK drivers/net/wireless/wl12xx/wl1251_tx.c drivers/net/wireless/wl12xx/wl1251_tx.c:118:32: warning: incorrect type in assignment (different base types) drivers/net/wireless/wl12xx/wl1251_tx.c:118:32: expected unsigned short [unsigned] [usertype] frag_threshold drivers/net/wireless/wl12xx/wl1251_tx.c:118:32: got restricted __le16 [usertype] <noident> drivers/net/wireless/wl12xx/wl1251_tx.c:164:24: warning: incorrect type in assignment (different base types) drivers/net/wireless/wl12xx/wl1251_tx.c:164:24: expected unsigned short [unsigned] [usertype] length drivers/net/wireless/wl12xx/wl1251_tx.c:164:24: got restricted __le16 [usertype] <noident> drivers/net/wireless/wl12xx/wl1251_tx.c:166:22: warning: incorrect type in assignment (different base types) drivers/net/wireless/wl12xx/wl1251_tx.c:166:22: expected unsigned short [unsigned] [usertype] rate drivers/net/wireless/wl12xx/wl1251_tx.c:166:22: got restricted __le16 [usertype] <noident> drivers/net/wireless/wl12xx/wl1251_tx.c:167:29: warning: incorrect type in assignment (different base types) drivers/net/wireless/wl12xx/wl1251_tx.c:167:29: expected unsigned int [unsigned] [usertype] expiry_time drivers/net/wireless/wl12xx/wl1251_tx.c:167:29: got restricted __le32 [usertype] <noident> drivers/net/wireless/wl12xx/wl1251_tx.c:200:43: warning: incorrect type in argument 1 (different base types) drivers/net/wireless/wl12xx/wl1251_tx.c:200:43: expected restricted __le16 [usertype] fc drivers/net/wireless/wl12xx/wl1251_tx.c:200:43: got unsigned short [unsigned] [assigned] [usertype] fc CHECK drivers/net/wireless/wl12xx/wl1251_cmd.c drivers/net/wireless/wl12xx/wl1251_cmd.c:428:39: warning: incorrect type in assignment (different base types) drivers/net/wireless/wl12xx/wl1251_cmd.c:428:39: expected unsigned int [unsigned] [usertype] rx_config_options drivers/net/wireless/wl12xx/wl1251_cmd.c:428:39: got restricted __le32 [usertype] <noident> drivers/net/wireless/wl12xx/wl1251_cmd.c:429:39: warning: incorrect type in assignment (different base types) drivers/net/wireless/wl12xx/wl1251_cmd.c:429:39: expected unsigned int [unsigned] [usertype] rx_filter_options drivers/net/wireless/wl12xx/wl1251_cmd.c:429:39: got restricted __le32 [usertype] <noident> drivers/net/wireless/wl12xx/wl1251_cmd.c:435:29: warning: incorrect type in assignment (different base types) drivers/net/wireless/wl12xx/wl1251_cmd.c:435:29: expected unsigned short [unsigned] [usertype] tx_rate drivers/net/wireless/wl12xx/wl1251_cmd.c:435:29: got restricted __le16 [usertype] <noident> drivers/net/wireless/wl12xx/wl1251_cmd.c:439:47: warning: incorrect type in assignment (different base types) drivers/net/wireless/wl12xx/wl1251_cmd.c:439:47: expected unsigned int [unsigned] [usertype] min_duration drivers/net/wireless/wl12xx/wl1251_cmd.c:439:47: got restricted __le32 [usertype] <noident> drivers/net/wireless/wl12xx/wl1251_cmd.c:441:47: warning: incorrect type in assignment (different base types) drivers/net/wireless/wl12xx/wl1251_cmd.c:441:47: expected unsigned int [unsigned] [usertype] max_duration drivers/net/wireless/wl12xx/wl1251_cmd.c:441:47: got restricted __le32 [usertype] <noident> CHECK drivers/net/wireless/wl12xx/wl1251_boot.c drivers/net/wireless/wl12xx/wl1251_boot.c:228:22: warning: symbol 'interrupt' shadows an earlier one /home/linville/git/wireless-next-2.6/arch/x86/include/asm/hw_irq.h:132:13: originally declared here Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-07-26iwlagn: use __packed on new structure definitionsJohn W. Linville
"iwlagn: add statistic notification structure for WiFi/BT devices" added several new '__attribute__ ((packed))' lines. Change them to the generic __packed. Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-07-23iwlwifi: remove spurious semicolonsJohannes Berg
defines shouldn't be terminated with a semicolon, the code using them should supply it. Luckily these are not used in a context where it matters. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com>
2010-07-23iwlwifi: reduce beacon fill conditionsJohannes Berg
Since the ibss_beacon variable will only be filled in the appropriate modes, there's no reason to be checking the mode again. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com>
2010-07-23iwlwifi: read multiple MAC addressesWey-Yi Guy
Some devices may have multiple MAC addresses in their EEPROM, read them and advertise them to cfg80211. Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2010-07-23iwlwifi: make iwl_mac_beacon_update staticJohannes Berg
This function is only needed in the same file it is defined in, i.e. iwl-core.c Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com>
2010-07-23iwlagn: fix firmware loading TLV error pathJohannes Berg
gcc complains about the firmware loading: iwl-agn.c: In function ‘iwlagn_load_firmware’: iwl-agn.c:1860: warning: ‘tlv_len’ may be used uninitialized in this function iwl-agn.c:1861: warning: ‘tlv_type’ may be used uninitialized in this function iwl-agn.c:1862: warning: ‘tlv_data’ may be used uninitialized in this function This is almost correct but we do do break out of the TLV parsing loop when setting ret. However, the code is hard to follow, and clearly even the compiler is having issues with it too. Additionally, however, the current code is wrong. If there is a TLV length check error, the code will report invalid TLV after parsing: ... because "len" will still be non-zero as we broke out of the loop. So to remove the warning and fix that issue, make the code easier to read by doing length checking with an error label. As a result, we can completely remove the "ret" variable. Also, while at it, remove the "fixed_tlv_size" variable since each TLV type has its own specified length, it just happens that we have only variable length, flags (0 length) and u32 TLVs right now. It should still be checked with more explicit length checks to make it easier to understand. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com>
2010-07-23iwlwifi: add TLV to specify the size of phy calibration tableWey-Yi Guy
Different devices have different size of phy calibration table; add new TLV to specify the size. If the TLV is not part of uCode header, the default table size will be used to make sure the backward compatibilities. Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com>
2010-07-23iwlagn: add bluetooth stats to debugfsWey-Yi Guy
For WiFi/BT combo devices, add bluetooth statistics counter read function to debugfs. Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com>
2010-07-23iwlagn: Add support for bluetooth statistics notificationWey-Yi Guy
WiFi/BT combo devices has different statistics notification structure, adding the support here to make sure the structure align correctly. Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com>
2010-07-23iwlagn: add .cfg flag to idenfity the need for bt statisticsWey-Yi Guy
Only WiFi/BT combo devices need to use bluetooth version of statistics notification; adding the flag in .cfg file to indicate the need for using different data structure. Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com>
2010-07-23iwlagn: add statistic notification structure for WiFi/BT devicesWey-Yi Guy
If its WiFi/BT combo device, the statistics notification sent by uCode will include the additional BT related statistics counters. Adding new data structure to support the new layout. Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com>
2010-07-21b43: silence phy_n sparse warningsLarry Finger
drivers/net/wireless/b43/phy_n.c:512:53: warning: cast truncates bits from constant value (ffff0fff becomes fff) drivers/net/wireless/b43/phy_n.c:765:66: warning: cast truncates bits from constant value (ffff7fff becomes 7fff) drivers/net/wireless/b43/phy_n.c:1012:38: warning: cast truncates bits from constant value (ffff00ff becomes ff) drivers/net/wireless/b43/phy_n.c:1119:38: warning: cast truncates bits from constant value (ffff0fff becomes fff) drivers/net/wireless/b43/phy_n.c:2458:56: warning: cast truncates bits from constant value (ffff7fff becomes 7fff) drivers/net/wireless/b43/phy_n.c:2933:38: warning: cast truncates bits from constant value (ffff0fff becomes fff) drivers/net/wireless/b43/phy_n.c:3294:57: warning: cast truncates bits from constant value (ffff3fff becomes 3fff) Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-07-21b43: silence most sparse warningsJohn W. Linville
CHECK drivers/net/wireless/b43/main.c drivers/net/wireless/b43/main.c:111:5: warning: symbol 'b43_modparam_pio' was not declared. Should it be static? CHECK drivers/net/wireless/b43/phy_g.c drivers/net/wireless/b43/phy_g.c:975:56: warning: cast truncates bits from constant value (ffff7fff becomes 7fff) CHECK drivers/net/wireless/b43/phy_lp.c drivers/net/wireless/b43/phy_lp.c:2701:6: warning: symbol 'b43_lpphy_op_switch_analog' was not declared. Should it be static? drivers/net/wireless/b43/phy_lp.c:1148:30: warning: cast truncates bits from constant value (ffff1fff becomes 1fff) drivers/net/wireless/b43/phy_lp.c:1525:30: warning: cast truncates bits from constant value (ffff1fff becomes 1fff) drivers/net/wireless/b43/phy_lp.c:1529:30: warning: cast truncates bits from constant value (ffff1fff becomes 1fff) CHECK drivers/net/wireless/b43/wa.c drivers/net/wireless/b43/wa.c:385:60: warning: cast truncates bits from constant value (ffff00ff becomes ff) drivers/net/wireless/b43/wa.c:403:55: warning: cast truncates bits from constant value (ffff00ff becomes ff) drivers/net/wireless/b43/wa.c:405:55: warning: cast truncates bits from constant value (ffff00ff becomes ff) drivers/net/wireless/b43/wa.c:415:71: warning: cast truncates bits from constant value (ffff0fff becomes fff) AFAICT, none of these amount to real bugs. But this reduces warning spam from sparse w/o significantly affecting readability of the code (IMHO). Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-07-20Merge branch 'master' of ↵David S. Miller
master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6 Conflicts: drivers/vhost/net.c net/bridge/br_device.c Fix merge conflict in drivers/vhost/net.c with guidance from Stephen Rothwell. Revert the effects of net-2.6 commit 573201f36fd9c7c6d5218cdcd9948cee700b277d since net-next-2.6 has fixes that make bridge netpoll work properly thus we don't need it disabled. Signed-off-by: David S. Miller <davem@davemloft.net>
2010-07-20rtl8180: improve signal reporting for rtl8185 hardwaremaster-2010-07-20John W. Linville
The existing code seemed to be somewhat based on the datasheet, but varied substantially from the vendor-provided driver. This mirrors the handling of the rtl8185 case from that driver, but still neglects the specifics for the rtl8180 hardware. Those details are a bit muddled... Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-07-20mwl8k: correct/silence sparse warningsJohn W. Linville
drivers/net/wireless/mwl8k.c:1541:21: warning: incorrect type in assignment (different base types) drivers/net/wireless/mwl8k.c:1541:21: expected restricted __le16 [usertype] result drivers/net/wireless/mwl8k.c:1541:21: got int drivers/net/wireless/mwl8k.c:1575:42: expected unsigned short [unsigned] [usertype] cmd drivers/net/wireless/mwl8k.c:1575:42: got restricted __le16 [usertype] code drivers/net/wireless/mwl8k.c:1587:50: warning: incorrect type in argument 1 (different base types) drivers/net/wireless/mwl8k.c:1587:50: expected unsigned short [unsigned] [usertype] cmd drivers/net/wireless/mwl8k.c:1587:50: got restricted __le16 [usertype] code drivers/net/wireless/mwl8k.c:1592:50: warning: incorrect type in argument 1 (different base types) drivers/net/wireless/mwl8k.c:1592:50: expected unsigned short [unsigned] [usertype] cmd drivers/net/wireless/mwl8k.c:1592:50: got restricted __le16 [usertype] code drivers/net/wireless/mwl8k.c:1845:27: warning: incorrect type in argument 1 (different base types) drivers/net/wireless/mwl8k.c:1845:27: expected unsigned int [unsigned] [usertype] <noident> drivers/net/wireless/mwl8k.c:1845:27: got restricted __le32 [usertype] <noident> drivers/net/wireless/mwl8k.c:1848:27: warning: incorrect type in argument 1 (different base types) drivers/net/wireless/mwl8k.c:1848:27: expected unsigned int [unsigned] [usertype] <noident> drivers/net/wireless/mwl8k.c:1848:27: got restricted __le32 [usertype] <noident> drivers/net/wireless/mwl8k.c:1851:27: warning: incorrect type in argument 1 (different base types) drivers/net/wireless/mwl8k.c:1851:27: expected unsigned int [unsigned] [usertype] <noident> drivers/net/wireless/mwl8k.c:1851:27: got restricted __le32 [usertype] <noident> drivers/net/wireless/mwl8k.c:1854:27: warning: incorrect type in argument 1 (different base types) drivers/net/wireless/mwl8k.c:1854:27: expected unsigned int [unsigned] [usertype] <noident> drivers/net/wireless/mwl8k.c:1854:27: got restricted __le32 [usertype] <noident> drivers/net/wireless/mwl8k.c:1857:27: warning: incorrect type in argument 1 (different base types) drivers/net/wireless/mwl8k.c:1857:27: expected unsigned int [unsigned] [usertype] <noident> drivers/net/wireless/mwl8k.c:1857:27: got restricted __le32 [usertype] <noident> drivers/net/wireless/mwl8k.c:1860:27: warning: incorrect type in argument 1 (different base types) drivers/net/wireless/mwl8k.c:1860:27: expected unsigned int [unsigned] [usertype] <noident> drivers/net/wireless/mwl8k.c:1860:27: got restricted __le32 [usertype] <noident> drivers/net/wireless/mwl8k.c:3055:20: warning: incorrect type in assignment (different base types) drivers/net/wireless/mwl8k.c:3055:20: expected restricted __le16 [usertype] ht_caps drivers/net/wireless/mwl8k.c:3055:20: got unsigned short [unsigned] [usertype] cap At least the last one looks like a real bug... Signed-off-by: John W. Linville <linville@tuxdriver.com> Acked-by: Lennert Buytenhek <buytenh@wantstofly.org>
2010-07-20rt2x00: correct sparse warning in rt2x00debug.cJohn W. Linville
CHECK drivers/net/wireless/rt2x00/rt2x00debug.c drivers/net/wireless/rt2x00/rt2x00debug.c:193:28: warning: incorrect type in assignment (different base types) drivers/net/wireless/rt2x00/rt2x00debug.c:193:28: expected restricted __le32 [usertype] chip_rev drivers/net/wireless/rt2x00/rt2x00debug.c:193:28: got restricted __le16 [usertype] <noident> Signed-off-by: John W. Linville <linville@tuxdriver.com> Acked-by: Ivo van Doorn <IvDoorn@gmail.com>
2010-07-20libipw: correct sparse warnings and mark some variables staticJohn W. Linville
CHECK drivers/net/wireless/ipw2x00/libipw_module.c drivers/net/wireless/ipw2x00/libipw_module.c:65:21: warning: symbol 'libipw_config_ops' was not declared. Should it be static? drivers/net/wireless/ipw2x00/libipw_module.c:66:6: warning: symbol 'libipw_wiphy_privid' was not declared. Should it be static? CHECK drivers/net/wireless/ipw2x00/libipw_wx.c drivers/net/wireless/ipw2x00/libipw_wx.c:415:17: warning: symbol 'ssid' shadows an earlier one drivers/net/wireless/ipw2x00/libipw_wx.c:324:9: originally declared here Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-07-20ipw2100: mark ipw2100_pm_qos_req staticJohn W. Linville
CHECK drivers/net/wireless/ipw2x00/ipw2100.c drivers/net/wireless/ipw2x00/ipw2100.c:177:28: warning: symbol 'ipw2100_pm_qos_req' was not declared. Should it be static? Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-07-20ath9k: correct sparse identified endian bug in ath_paprd_calibrateJohn W. Linville
drivers/net/wireless/ath/ath9k/main.c:282:26: warning: incorrect type in assignment (different base types) drivers/net/wireless/ath/ath9k/main.c:282:26: expected restricted __le16 [usertype] duration_id drivers/net/wireless/ath/ath9k/main.c:282:26: got int Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-07-20mac80211: move QoS-enable to BSS infoJohannes Berg
Ever since commit e1b3ec1a2a336c328c336cfa5485a5f0484cc90d Author: Stanislaw Gruszka <sgruszka@redhat.com> Date: Mon Mar 29 12:18:34 2010 +0200 mac80211: explicitly disable/enable QoS mac80211 is telling drivers, in particular iwlwifi, whether QoS is enabled or not. However, this is only relevant for station mode, since only then will any device send nullfunc frames and need to know whether they should be QoS frames or not. In other modes, there are (currently) no frames the device is supposed to send. When you now consider virtual interfaces, it becomes apparent that the current mechanism is inadequate since it enables/disables QoS on a global scale, where for nullfunc frames it has to be on a per-interface scale. Due to the above considerations, we can change the way mac80211 advertises the QoS state to drivers to only ever advertise it as "off" in station mode, and make it a per-BSS setting. Tested-by: Stanislaw Gruszka <sgruszka@redhat.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
generated by cgit v1.2.3 (git 2.39.1) at 2024-07-14 00:47:17 +0000