summaryrefslogtreecommitdiff
path: root/drivers/net
AgeCommit message (Collapse)Author
2011-05-17xen: netback: use __CONST_RING_SIZE not __RING_SIZEIan Campbell
The later causes warnings with gcc 4.5+. __CONST_RING_SIZE was introduced in 667c78afaec0 to fix this but as netback wasn't upstream at the time it did not benefit, hence: CC drivers/net/xen-netback/netback.o drivers/net/xen-netback/netback.c:110:37: warning: variably modified 'grant_copy_op' at file scope [enabled by default] drivers/net/xen-netback/netback.c:111:30: warning: variably modified 'meta' at file scope [enabled by default] drivers/net/xen-netback/netback.c: In function 'xen_netbk_rx_action': drivers/net/xen-netback/netback.c:584:6: warning: variable 'irq' set but not used [-Wunused-but-set-variable] Thanks to Witold Baryluk for pointing this out. Signed-off-by: Ian Campbell <ian.campbell@citrix.com> Cc: Witold Baryluk <baryluk@smp.if.uj.edu.pl> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-05-17Merge branch 'master' of ↵David S. Miller
git://git.kernel.org/pub/scm/linux/kernel/git/bwh/sfc-next-2.6
2011-05-16Merge branch 'for-davem' of ↵David S. Miller
git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-next-2.6
2011-05-16Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6Linus Torvalds
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6: net: Change netdev_fix_features messages loglevel vmxnet3: Fix inconsistent LRO state after initialization sfc: Fix oops in register dump after mapping change IPVS: fix netns if reading ip_vs_* procfs entries bridge: fix forwarding of IPv6
2011-05-16Merge branch 'master' of ↵John W. Linville
git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-next-2.6 into for-davem Conflicts: drivers/net/wireless/iwlwifi/iwl-agn-tx.c net/mac80211/sta_info.h
2011-05-16sfc: Use netif_device_{detach,attach}() around reset and self-testBen Hutchings
We need to keep the TX queues stopped throughout a reset, without triggering the TX watchdog and regardless of the link state. The proper way to do this is to use netif_device_{detach,attach}() just as we do around suspend/resume, rather than the current bodge of faking link-down. Since we also need to do this during an offline self-test and we perform a reset during that, add these function calls outside of efx_reset_down() and efx_reset_up(). Signed-off-by: Ben Hutchings <bhutchings@solarflare.com>
2011-05-16vmxnet3: Fix inconsistent LRO state after initializationThomas Jarosch
During initialization of vmxnet3, the state of LRO gets out of sync with netdev->features. This leads to very poor TCP performance in a IP forwarding setup and is hitting many VMware users. Simplified call sequence: 1. vmxnet3_declare_features() initializes "adapter->lro" to true. 2. The kernel automatically disables LRO if IP forwarding is enabled, so vmxnet3_set_flags() gets called. This also updates netdev->features. 3. Now vmxnet3_setup_driver_shared() is called. "adapter->lro" is still set to true and LRO gets enabled again, even though netdev->features shows it's disabled. Fix it by updating "adapter->lro", too. The private vmxnet3 adapter flags are scheduled for removal in net-next, see commit a0d2730c9571aeba793cb5d3009094ee1d8fda35 "net: vmxnet3: convert to hw_features". Patch applies to 2.6.37 / 2.6.38 and 2.6.39-rc6. Please CC: comments. Signed-off-by: Thomas Jarosch <thomas.jarosch@intra2net.com> Acked-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-05-16sfc: Fix oops in register dump after mapping changeBen Hutchings
Commit 747df2258b1b9a2e25929ef496262c339c380009 ('sfc: Always map MCDI shared memory as uncacheable') introduced a separate mapping for the MCDI shared memory (MC_TREG_SMEM). This means we can no longer easily include it in the register dump. Since it is not particularly useful in debugging, substitute a recognisable dummy value. Signed-off-by: Ben Hutchings <bhutchings@solarflare.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-05-16be2net: FW download for LancerShripad Nunjundarao
Added implementation of FW download feature for Lancer. Signed-off-by: Shripad Nunjundarao <shripad.nunjundarao@emulex.com> Signed-off-by: Sevin Xavier <selvin.xavier@emulex.com> Signed-off-by: Padmanabh Ratnakar <padmanabh.ratnakar@emulex.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-05-16be2net: Stats for LancerSelvin Xavier
Added Lancer stats implementation. Signed-off-by: Selvin Xavier <selvin.xavier@emulex.com> Signed-off-by: Padmanabh Ratnakar <padmanabh.ratnakar@emulex.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-05-16be2net: Support for version 1 of stats for BE3Ajit Khaparde
Added support to get version 1 of the stats for BE3. Use old stats command for BE2. Signed-off-by: Ajit Khaparde <ajit.khaparde@emulex.com> Signed-off-by: Selvin Xavier <selvin.xavier@emulex.com> Signed-off-by: Padmanabh Ratnakar <padmanabh.ratnakar@emulex.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-05-16mwifiex: use ieee80211_amsdu_to_8023s routineYogesh Ashok Powar
mwifiex was using its own implementation of converting 802.11n AMSDU to 802.3s. This patch removes mwifiex specific implementation and uses existing ieee80211_amsdu_to_8023s routine. Signed-off-by: Yogesh Ashok Powar <yogeshp@marvell.com> Signed-off-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-05-16cfg80211: make stripping of 802.11 header optional from AMSDUYogesh Ashok Powar
Currently the devices that have already stripped IEEE 802.11 header from the AMSDU SKB can not use ieee80211_amsdu_to_8023s routine. This patch enhances ieee80211_amsdu_to_8023s() API by changing mandatory removing of IEEE 802.11 header from AMSDU to optional. Signed-off-by: Yogesh Ashok Powar <yogeshp@marvell.com> Signed-off-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-05-16ath9k: make npending frames check as boolMohammed Shafi Shajakhan
we are not doing anything by tracking the number of pending frames. bail out when we first find a pending frame in any one of the 10 queues. Signed-off-by: Mohammed Shafi Shajakhan <mshajakhan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-05-16ath9k: make sure main_rssi is positiveMohammed Shafi Shajakhan
some times the rssi control descriptor for the main antenna may be negative like that of alternate antenna, hence before incrementing packet counts/rssi of main/alternate antenna make sure both main_rssi and alt_rssi are positive only. this avoids wrong selection of antenna due to diversity Cc: Gabriel Tseng <Gabriel.Tseng@Atheros.com> Cc: Senthilkumar Balasubramanian <Senthilkumar.Balasubramanian@Atheros.com> Signed-off-by: Mohammed Shafi Shajakhan <mshajakhan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-05-16ath9k: configure fast_div_bias based on diversity groupMohammed Shafi Shajakhan
configure fast diversity bias based on the antenna diversity group and based on main/alt LNA configurations. also configure main antenna and alternate antenna to gain-table 0 for diversity group 2(AR9485) Cc: Gabriel Tseng <Gabriel.Tseng@Atheros.com> Cc: Senthilkumar Balasubramanian <Senthilkumar.Balasubramanian@Atheros.com> Signed-off-by: Mohammed Shafi Shajakhan <mshajakhan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-05-16ath9k: Implement an API to swap main/ALT LNA'sMohammed Shafi Shajakhan
for the diversity group 2(AR9485) we swap the LNA's of main/ALT antenna based on alternate antenna's rssi average in comparision with main antenna's rssi, while for AR9285(antenna diversity group 0)we still follow the older method of looking at the packet count in alternate antenna Cc: Gabriel Tseng <Gabriel.Tseng@Atheros.com> Cc: Senthilkumar Balasubramanian <Senthilkumar.Balasubramanian@Atheros.com> Signed-off-by: Mohammed Shafi Shajakhan <mshajakhan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-05-16ath9k_hw: define antenna diversity groupMohammed Shafi Shajakhan
AR9285 belongs to diversity group 0 and AR9485 belongs to diversity group 2. Based on the diversity group we configure certain antenna diversity paramaters such as lna1_lna2_delta and fast diversity bias values. For AR9485 we have some gain table parameter which selects the gain table 0/1 for main and alternate antenna Cc: Gabriel Tseng <Gabriel.Tseng@Atheros.com> Cc: Senthilkumar Balasubramanian <Senthilkumar.Balasubramanian@Atheros.com> Signed-off-by: Mohammed Shafi Shajakhan <mshajakhan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-05-16ath9k_hw: define modules to get/set Antenna diversity paramatersMohammed Shafi Shajakhan
these are the two important modules that will be called by the antenna diversity algorithm module in the rx. this will continuosly configure the hardware based on the current diversity status obtained from the algorithm Cc: Gabriel Tseng <Gabriel.Tseng@Atheros.com> Cc: Senthilkumar Balasubramanian <Senthilkumar.Balasubramanian@Atheros.com> Signed-off-by: Mohammed Shafi Shajakhan <mshajakhan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-05-16ath9k_hw: config diversity based on eeprom contentsMohammed Shafi Shajakhan
* enable LNA-diversity, fast-diversity for AR9485 based on the value read from EEPROM content * if antenna diversity/combining is supported, set LNA1 for the main antenna and LNA2 for the alternate antenna based on the new diversity algorithm Cc: Gabriel Tseng <Gabriel.Tseng@Atheros.com> Cc: Senthilkumar Balasubramanian <Senthilkumar.Balasubramanian@Atheros.com> Cc: Luis Rodriguez <Luis.Rodriguez@Atheros.com> Signed-off-by: Mohammed Shafi Shajakhan <mshajakhan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-05-16ath9k_hw: define registers/macros to support Antenna diversityMohammed Shafi Shajakhan
define few registers and macros to configure/enable Antenna diversity parameters in AR9485 Cc: Gabriel Tseng <Gabriel.Tseng@Atheros.com> Cc: Senthilkumar Balasubramanian <Senthilkumar.Balasubramanian@Atheros.com> Signed-off-by: Mohammed Shafi Shajakhan <mshajakhan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-05-16ath9k_hw: enable Antenna diversity for AR9485Mohammed Shafi Shajakhan
read antenna diversity and combining information from the EEPROM. Enable antenna diversity/combining feature only when both LNA diversity and fast diversity are supported Cc: Gabriel Tseng <Gabriel.Tseng@Atheros.com> Cc: Senthilkumar Balasubramanian <Senthilkumar.Balasubramanian@Atheros.com> Tested-by: Mohammed Shafi Shajakhan <mshajakhan@atheros.com> Signed-off-by: Mohammed Shafi Shajakhan <mshajakhan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-05-16ath9k_hw: make antenna diversity modules chip specificMohammed Shafi Shajakhan
this is necessary to support Antenna diversity and combining in new chip sets such as AR9485, previously Antenna diversity support is available only in AR9285 Cc: Gabriel Tseng <Gabriel.Tseng@Atheros.com> Cc: Senthilkumar Balasubramanian <Senthilkumar.Balasubramanian@Atheros.com> Signed-off-by: Mohammed Shafi Shajakhan <mshajakhan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-05-16iwlwifi: Silence DEBUG_STRICT_USER_COPY_CHECKS=y warningStephen Boyd
Enabling DEBUG_STRICT_USER_COPY_CHECKS causes the following warning: In file included from arch/x86/include/asm/uaccess.h:573, from include/net/checksum.h:25, from include/linux/skbuff.h:28, from drivers/net/wireless/iwlwifi/iwl-agn-rs.c:28: In function 'copy_from_user', inlined from 'rs_sta_dbgfs_scale_table_write' at drivers/net/wireless/iwlwifi/iwl-agn-rs.c:3099: arch/x86/include/asm/uaccess_64.h:65: warning: call to 'copy_from_user_overflow' declared with attribute warning: copy_from_user() buffer size is not provably correct presumably due to buf_size being signed causing GCC to fail to see that buf_size can't become negative. Signed-off-by: Stephen Boyd <sboyd@codeaurora.org> Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-05-16iwlegacy: Silence DEBUG_STRICT_USER_COPY_CHECKS=y warningStephen Boyd
Enabling DEBUG_STRICT_USER_COPY_CHECKS causes the following warning: In file included from arch/x86/include/asm/uaccess.h:573, from include/net/checksum.h:25, from include/linux/skbuff.h:28, from drivers/net/wireless/iwlegacy/iwl-4965-rs.c:28: In function 'copy_from_user', inlined from 'iwl4965_rs_sta_dbgfs_scale_table_write' at drivers/net/wireless/iwlegacy/iwl-4965-rs.c:2616: arch/x86/include/asm/uaccess_64.h:65: warning: call to 'copy_from_user_overflow' declared with attribute warning: copy_from_user() buffer size is not provably correct presumably due to buf_size being signed causing GCC to fail to see that buf_size can't become negative. Cc: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Stephen Boyd <sboyd@codeaurora.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-05-16bnx2x: Allow ethtool to enable/disable loopback.Mahesh Bandewar
This patch updates the bnx2x_set_features() to handle loopback mode. When enabled; it sets internal-MAC loopback. Signed-off-by: Mahesh Bandewar <maheshb@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-05-16sfc: Fix TX queue numbering when separate_tx_channels=1Ben Hutchings
This option appears to have been broken by commit 8313aca38b3937947fffebca6e34bac8e24300c8 ('sfc: Allocate each channel separately, along with its RX and TX queues'). Signed-off-by: Ben Hutchings <bhutchings@solarflare.com>
2011-05-15net: drivers: kill two unused macro definitionsShan Wei
Signed-off-by: Shan Wei <shanwei@cn.fujitsu.com> Reviewed-by: Jiri Pirko <jpirko@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-05-14ixgbe: Add support for new 82599 adapterDon Skidmore
This patch adds support for a new adapter in the 82599 family. Included in that support is a new media_type ixgbe_media_type_fiber_lco. Signed-of-by: Don Skidmore <donald.c.skidmore@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2011-05-14ixgbe: fix sparse warningEmil Tantilov
error: bad constant expression Signed-off-by: Emil Tantilov <emil.s.tantilov@intel.com> Tested-by: Evan Swanson <evan.swanson@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2011-05-14ixgbe: cleanup some minor issues in ixgbe_down()Alexander Duyck
This patch cleans up two minor issues in ixgbe_down. Specifically it addresses the fact that the VFs should not be pinged until after interrupts are disabled otherwise they might still get a response. It also drops the use of the txdctl temporary variable since the only bit we should be writing to the TXDCTL registers during a shutdown is the flush bit. Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2011-05-14ixgbe: Merge over-temp task into service taskAlexander Duyck
This change merges the over-temp task into the service task. As a result all tasklets are finally combined into once single tasklet for easier management. Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2011-05-14ixgbe: Merge ATR reinit into the service taskAlexander Duyck
This change merges the ATR table reinitialization into the service task. This is yet another opportunity to avoid any race conditions as we don't want to be attempting to reinitialize the table during a possible reset. In addition this change adds a counter for table reinitialization so that it can be tracked as part of the regular statistics. Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com> Tested-by: Evan Swanson <evan.swanson@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2011-05-14ixgbe: merge reset task into service taskAlexander Duyck
This change is meant to further help to reduce possible configuration collisions between the various tasklets. This change combines the device reset with the service task. As a result it is now not possible to be updating the link on the device while also resetting the part. Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com> Tested-by: Evan Swanson <evan.swanson@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2011-05-14ixgbe: Merge watchdog functionality into service taskAlexander Duyck
This patch is meant to merge the functionality of the ixgbe watchdog task into the service task. By doing this all link state functionality will be controlled by a single task. As a result the reliability of the interface will be improved as the likelihood of any race conditions is further reduced. Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2011-05-14ixgbe: Combine SFP and multi-speed fiber task into single service taskAlexander Duyck
This change is meant to address several race conditions with multi-speed fiber SFP+ modules in 82599 adapters. Specifically issues have been seen in which both the SFP configuration and the multi-speed fiber configuration are running simultaneously which will result in the device getting into an erroneous link down state. Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com> Tested-by: Evan Swanson <evan.swanson@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2011-05-14ixgbe: move flags and state into the same cachelineAlexander Duyck
This change moves flags and state into the same cacheline. The reason for this change is because both are frequently read around the same time and infrequently written. By combining them into the same cacheline this should help to reduce memory utilization. Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com> Tested-by: Evan Swanson <evan.swanson@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2011-05-14ixgbe: force unlock on timeoutEmil Tantilov
The semaphore can be in locked state upon driver load, particularly on 82598 if a machine is rebooted due to panic and the semaphore was acquired just prior to the panic. This patch unlocks the semaphore if it times out. Signed-off-by: Emil Tantilov <emil.s.tantilov@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2011-05-14ixgbe: Add macvlan support for VFGreg Rose
Add infrastructure in the PF driver to support macvlan in the VF driver. Signed-off-by: Greg Rose <gregory.v.rose@intel.com> Tested-by: Sibai Li <sibai.li@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2011-05-14ixgbevf: Add macvlan support in the set rx mode opGreg Rose
Implement setup of unicast address list in the VF driver's set_rx_mode netdev op. Unicast addresses are sent to the PF via a mailbox message and the PF will check if it has room in the RAR table and if so set the filter for the VF. Signed-off-by: Greg Rose <gregory.v.rose@intel.com> Tested-by: Sibai Li <sibai.li@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2011-05-14e1000e: minor comment cleanupsBruce Allan
Signed-off-by: Bruce Allan <bruce.w.allan@intel.com> Tested-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2011-05-14sfc: Fix return value from efx_ethtool_set_rx_ntuple()Ben Hutchings
ethtool_ops::set_rx_ntuple is supposed to return 0 on success, but it currently returns the filter ID when it inserts or modifies a filter. Signed-off-by: Ben Hutchings <bhutchings@solarflare.com>
2011-05-13Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6Linus Torvalds
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6: bridge: fix forwarding of IPv6 bonding,llc: Fix structure sizeof incompatibility for some PDUs ipv6: restore correct ECN handling on TCP xmit ne-h8300: Fix regression caused during net_device_ops conversion hydra: Fix regression caused during net_device_ops conversion zorro8390: Fix regression caused during net_device_ops conversion sfc: Always map MCDI shared memory as uncacheable ehea: Fix memory hotplug oops libertas: fix cmdpendingq locking iwlegacy: fix IBSS mode crashes ath9k: Fix a warning due to a queued work during S3 state mac80211: don't start the dynamic ps timer if not associated
2011-05-13olympic: convert to seq_fileAlexey Dobriyan
->read_proc interface is going away, switch to seq_file. Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-05-13stmmac: fix autoneg in set_pauseparamGiuseppe CAVALLARO
This patch fixes a bug in the set_pauseparam function that didn't well manage the ANE field and returned broken values when use ethtool -A|-a. Signed-off-by: Giuseppe Cavallaro <peppe.cavallaro@st.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-05-13stmmac: don't go through ethtool to start auto-negotiationDavid Decotigny
The driver used to call phy's ethtool configuration routine to start auto-negotiation. This change has it call directly phy's routine to start auto-negotiation. The initial version was hiding phy_start_aneg() return value, this patch returns it (<0 upon error). Tested: module compiles, tested on STM HDK7108 STB. Signed-off-by: David Decotigny <decot@google.com> Signed-off-by: Giuseppe Cavallaro <peppe.cavallaro@st.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-05-13bonding,llc: Fix structure sizeof incompatibility for some PDUsVitalii Demianets
With some combinations of arch/compiler (e.g. arm-linux-gcc) the sizeof operator on structure returns value greater than expected. In cases when the structure is used for mapping PDU fields it may lead to unexpected results (such as holes and alignment problems in skb data). __packed prevents this undesired behavior. Signed-off-by: Vitalii Demianets <vitas@nppfactor.kiev.ua> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-05-13qlcnic: Bumped up version number to 5.0.18Anirban Chakraborty
Update driver version number Signed-off-by: Anirban Chakraborty <anirban.chakraborty@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-05-13qlcnic: Take FW dump via ethtoolAnirban Chakraborty
Driver checks if the previous dump has been cleared before taking the dump. It doesn't take the dump if it is not cleared. Changes from v2: Added lock to protect dump data structures from being mangled while dumping or setting them via ethtool. Signed-off-by: Anirban Chakraborty <anirban.chakraborty@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-05-13qlcnic: FW dump supportAnirban Chakraborty
Added code to take FW dump. o Driver queries FW at the init time and gets the dump template o It takes FW dump as per the dump template o Level of FW dump (and its size) is configured via dump flag Signed-off-by: Sritej Velaga <sritej.velaga@qlogic.com> Signed-off-by: Anirban Chakraborty <anirban.chakraborty@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
generated by cgit v1.2.3 (git 2.39.1) at 2024-07-16 23:15:58 +0000