summaryrefslogtreecommitdiff
path: root/drivers/net
AgeCommit message (Collapse)Author
2012-04-27wl1251: fix crash on remove due to premature kfreeGrazvydas Ignotas
Currently SDIO glue frees it's own structure before calling wl1251_free_hw(), which in turn calls ieee80211_unregister_hw(). The later call may result in a need to communicate with the chip to stop it (as it happens now if the interface is still up before rmmod), which means calls are made back to the glue, resulting in freed memory access. Fix this by freeing glue data last. Cc: stable@vger.kernel.org # v2.6.37+ Signed-off-by: Grazvydas Ignotas <notasas@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-04-27b43: only reload config after successful initializationSeth Forshee
Commit 2a19032 (b43: reload phy and bss settings after core restarts) introduced an unconditional call to b43_op_config() at the end of b43_op_start(). When firmware fails to load this can wedge the system. There's no need to reload the configuration after a failed initialization anyway, so only make the call if initialization was successful. BugLink: http://bugs.launchpad.net/bugs/950295 Cc: Felix Fietkau <nbd@openwrt.org> Cc: <stable@vger.kernel.org> Signed-off-by: Seth Forshee <seth.forshee@canonical.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-04-27iwlwifi: use 6000G2B for 6030 device seriesWey-Yi Guy
"iwlwifi: use correct released ucode version" change the ucode api ok from 6000G2 to 6000G2B, but it shall belong to 6030 device series, not the 6005 device series. Fix it Cc: stable@vger.kernel.org #3.3+ Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-04-27ath5k: add missing iounmap to AHB probe removalJonathan Bither
When our driver device is removed on the AHB bus, our IO memory is never unmapped. Signed-off-by: Jonathan Bither <jonbither@gmail.com> Reviewed-by: Pavel Roskin <proski@gnu.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-04-27brcm80211: fmac: fix missing completion events issueFranky Lin
dpc takes care of all data packets transmissions for sdio function 2. It is possible that it misses some completion events when the traffic is heavy or it's running on a slow cpu. A linked list is introduced to make sure dpc is invoked whenever needed. Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com> Reviewed-by: Arend van Spriel <arend@broadcom.com> Signed-off-by: Franky Lin <frankyl@broadcom.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-04-27brcm80211: fmac: fix SDIO function 0 register r/w issueFranky Lin
SDIO stack doesn't have a structure for function 0. The structure pointer stored in card->sdio_func[0] is actually for function 1. With current implementation the register read/write is applied to function 1. This pathch fixes the issue. Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com> Reviewed-by: Arend van Spriel <arend@broadcom.com> Reviewed-by: Florian Fainelli <florian@openwrt.org> Reviewed-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: Franky Lin <frankyl@broadcom.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-04-26smsc95xx: mark link down on startup and let PHY interrupt deal with carrier ↵Paolo Pisati
changes Without this patch sysfs reports the cable as present flag@flag-desktop:~$ cat /sys/class/net/eth0/carrier 1 while it's not: flag@flag-desktop:~$ sudo mii-tool eth0 eth0: no link Tested on my Beagle XM. v2: added mantainer to the list of recipient Signed-off-by: Paolo Pisati <paolo.pisati@canonical.com> Acked-by: Steve Glendinning <steve.glendinning@shawell.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-04-26dl2k: Clean up rio_ioctlJeff Mahoney
The dl2k driver's rio_ioctl call has a few issues: - No permissions checking - Implements SIOCGMIIREG and SIOCGMIIREG using the SIOCDEVPRIVATE numbers - Has a few ioctls that may have been used for debugging at one point but have no place in the kernel proper. This patch removes all but the MII ioctls, renumbers them to use the standard ones, and adds the proper permission check for SIOCSMIIREG. We can also get rid of the dl2k-specific struct mii_data in favor of the generic struct mii_ioctl_data. Since we have the phyid on hand, we can add the SIOCGMIIPHY ioctl too. Most of the MII code for the driver could probably be converted to use the generic MII library but I don't have a device to test the results. Reported-by: Stephan Mueller <stephan.mueller@atsec.com> Signed-off-by: Jeff Mahoney <jeffm@suse.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-04-26Merge branch 'master' of ↵David S. Miller
git://git.kernel.org/pub/scm/linux/kernel/git/jkirsher/net
2012-04-26ehea: fix promiscuous modeThadeu Lima de Souza Cascardo
commit a4910b744486254cfa61995954c118fb2283c4fd has broken promiscuous mode, which is never set. port->promisc just reflects the last setting of PROMISCUOUS mode to avoid doing an extra hypercall when it's already set. However, since it may fail because of hypervisor permissions, we should still respect the multicast settings and not simply exit after setting promiscuous mode. Signed-off-by: Thadeu Lima de Souza Cascardo <cascardo@linux.vnet.ibm.com> Cc: Breno Leitao <leitao@linux.vnet.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-04-26ehea: fix allmulticast supportThadeu Lima de Souza Cascardo
There was a bug in the mask of regtype parameter for registering a multicast filter. It was ignoring the scope bit, which was wrongly being used for all filters. The SCOPE_ALL value adds a filter that allows all multicast packets and ignores the MAC parameter, just what allmulticast needs. The normals filters, however, should not use SCOPE_ALL. Signed-off-by: Thadeu Lima de Souza Cascardo <cascardo@linux.vnet.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-04-25Merge branch 'for-davem' of ↵David S. Miller
git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless
2012-04-25tg3: Avoid panic from reserved statblk field accessMatt Carlson
When RSS is enabled, interrupt vector 0 does not receive any rx traffic. The rx producer index fields for vector 0's status block should be considered reserved in this case. This patch changes the code to respect these reserved fields, which avoids a kernel panic when these fields take on non-zero values. Signed-off-by: Matt Carlson <mcarlson@broadcom.com> Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-04-25tlan: add cast needed for proper 64 bit operationBenjamin Poirier
Changes this beauty into a statement that actually has an effect on amd64. Tested-by: Per Jessen <per@opensuse.org> Signed-off-by: Benjamin Poirier <bpoirier@suse.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-04-25Merge branch 'master' of ↵John W. Linville
git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless into for-davem
2012-04-24e1000e: Fix default interrupt throttle rate not set in NIC HWJeff Kirsher
Based on the original patch from Ying Cai <ycai@google.com> This change ensures that the itr/itr_setting adjustment logic is used, even for the default/compiled-in value. Context: When we changed the default InterruptThrottleRate value from default (3 = dynamic mode) to 8000 for example, only adapter->itr_setting (which controls interrupt coalescing mode) was set to 8000, but adapter->itr (which controls the value set in NIC register) was not updated accordingly. So from ethtool, it seemed the interrupt throttling is enabled at 8000 intr/s, but the NIC actually was running in dynamic mode which has lower CPU efficiency especially when throughput is not high. CC: Ying Cai <ycai@google.com> CC: David Decotigny <david.decotigny@google.com> Signed-off-by: Jeff Kirsher <jeffrey.kirsher@intel.com> Tested-by: Aaron Brown <aaron.f.brown@intel.com>
2012-04-24e1000e: MSI interrupt test failed, using legacy interruptPrasanna S Panchamukhi
Following logs where seen on Systems with multiple NICs, while using MSI interrupts as shown below: Feb 16 15:09:32 (none) user.notice kernel: 0000:00:0d.0: lan0_0: NIC Link is Up 1000 Mbps Full Duplex, Flow Control: RX/TX Feb 16 15:09:32 (none) user.notice kernel: 0000:40:0d.0: wan0_1: NIC Link is Up 1000 Mbps Full Duplex, Flow Control: RX/TX Feb 16 15:09:32 (none) user.notice kernel: 0000:40:0d.0: lan0_1: NIC Link is Up 1000 Mbps Full Duplex, Flow Control: RX/TX Feb 16 15:09:32 (none) user.warn kernel: 0000:40:0e.0: wan4_0: MSI interrupt test failed, using legacy interrupt. Feb 16 15:09:32 (none) user.notice kernel: 0000:00:0e.0: wan1_0: NIC Link is Up 1000 Mbps Full Duplex, Flow Control: RX/TX Feb 16 15:09:33 (none) user.notice kernel: 0000:00:0e.0: lan1_0: NIC Link is Up 1000 Mbps Full Duplex, Flow Control: RX/TX Feb 16 15:09:33 (none) user.notice kernel: 0000:00:0f.0: wan2_0: NIC Link is Up 1000 Mbps Full Duplex, Flow Control: RX/TX Feb 16 15:09:33 (none) user.notice kernel: 0000:00:0f.0: lan2_0: NIC Link is Up 1000 Mbps Full Duplex, Flow Control: RX/TX Feb 16 15:09:33 (none) user.notice kernel: 0000:40:0a.0: wan3_0: NIC Link is Up 1000 Mbps Full Duplex, Flow Control: RX/TX Feb 16 15:09:33 (none) user.notice kernel: 0000:40:0a.0: lan3_0: NIC Link is Up 1000 Mbps Full Duplex, Flow Control: RX/TX Feb 16 15:09:34 (none) user.notice kernel: 0000:40:0e.0: lan4_0: NIC Link is Up 1000 Mbps Full Duplex, Flow Control: RX/TX Feb 16 15:09:34 (none) user.notice kernel: 0000:40:0f.0: wan5_0: NIC Link is Up 1000 Mbps Full Duplex, Flow Control: RX/TX Feb 16 15:09:34 (none) user.notice kernel: 0000:40:0f.0: lan5_0: NIC Link is Up 1000 Mbps Full Duplex, Flow Control: RX/TX This patch fixes this problem by increasing the msleep from 50 to 100. Signed-off-by: Prasanna S Panchamukhi <ppanchamukhi@riverbed.com> Tested-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2012-04-24iwlwifi: use correct released ucode versionMeenakshi Venkataraman
Report correctly the latest released version of the iwlwifi firmware for all iwlwifi-supported devices. Cc: stable@vger.kernel.org #3.3+ Signed-off-by: Meenakshi Venkataraman <meenakshi.venkataraman@intel.com> Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-04-24iwlwifi: fix hardware queue programmingJohannes Berg
Newer devices have 20 (5000 series) or 30 (6000 series) hardware queues, rather than the 16 that 4965 had. This was added to the driver a long time ago, but improperly: the queue registers for the higher queues aren't just continuations of the registers for the first 16 queues, they are in other places. Therefore, the hardware would lock up when trying to activate queue 16 or above and the device would have to be restarted. Thanks goes to Emmanuel who identified this and told me how the queue programming should be done. Note that we don't use queues 20 and higher today and doing so needs more work than this. Cc: stable@vger.kernel.org Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-04-24asix: Fix tx transfer padding for full-speed USBIngo van Lil
The asix.c USB Ethernet driver avoids ending a tx transfer with a zero- length packet by appending a four-byte padding to transfers whose length is a multiple of maxpacket. However, the hard-coded 512 byte maxpacket length is valid for high-speed USB only; full-speed USB uses 64 byte packets. Signed-off-by: Ingo van Lil <inguin@gmx.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-04-24net/davinci_emac: fix failing PHY connect attemptsAnatolij Gustschin
PHY connect attempts fail if no PHY id is specified in the emac platform data and another mdio bus has been registered before 'davinci_mdio' bus. In this case when configuring the interface, there will be an attempt to connect to already attached PHY on the previously registered mdio bus: net eth1: PHY already attached net eth1: could not connect to phy smsc911x-0:01 IP-Config: Failed to open eth1 IP-Config: Device `eth1' not found Fix this by modifying match_first_device() to match first PHY device on 'davinci_mdio' bus. Signed-off-by: Anatolij Gustschin <agust@denx.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-04-24ehea: only register irq after setting up portsThadeu Lima de Souza Cascardo
If we receive an interrupt too early before we set up ports in the probe function, there won't be any port ready to handle it. Only registering the irq after the ports are setup fixes the problem, and works fine without losing any interrupts. This causes crashes in some situations: [c000000f7ff7fd60] d000000008e223f0 .ehea_neq_tasklet+0x78/0x148 [ehea] [c000000f7ff7fe00] c0000000000b6cac .tasklet_hi_action+0xdc/0x210 [c000000f7ff7fea0] c0000000000b7cc8 .__do_softirq+0x178/0x300 [c000000f7ff7ff90] c000000000022694 .call_do_softirq+0x14/0x24 [c000000f68ee7900] c000000000010e04 .do_softirq+0xec/0x110 [c000000f68ee79a0] c0000000000b789c .irq_exit+0xac/0xe0 [c000000f68ee7a20] c0000000000110bc .do_IRQ+0x114/0x2a8 [c000000f68ee7ae0] c00000000000553c hardware_interrupt_entry+0x18/0x1c Signed-off-by: David S. Miller <davem@davemloft.net>
2012-04-24net: usb: smsc95xx: fix mtuStephane Fillod
Make smsc95xx recalculate the hard_mtu after adjusting the hard_header_len. Without this, usbnet adjusts the MTU down to 1488 bytes, and the host is unable to receive standard 1500-byte frames from the device. Inspired by same fix on cdc_eem 78fb72f7936c01d5b426c03a691eca082b03f2b9. Tested on ARM/Beagle. Signed-off-by: Stephane Fillod <fillods@users.sf.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-04-23brcmsmac: "INTERMEDIATE but not AMPDU" only when tracingEldad Zack
I keep getting the following messages on the log buffer: [ 2167.097507] ieee80211 phy0: brcms_c_dotxstatus: INTERMEDIATE but not AMPDU [ 2281.331305] ieee80211 phy0: brcms_c_dotxstatus: INTERMEDIATE but not AMPDU [ 2281.332539] ieee80211 phy0: brcms_c_dotxstatus: INTERMEDIATE but not AMPDU [ 2329.876605] ieee80211 phy0: brcms_c_dotxstatus: INTERMEDIATE but not AMPDU [ 2329.877354] ieee80211 phy0: brcms_c_dotxstatus: INTERMEDIATE but not AMPDU [ 2462.280756] ieee80211 phy0: brcms_c_dotxstatus: INTERMEDIATE but not AMPDU [ 2615.651689] ieee80211 phy0: brcms_c_dotxstatus: INTERMEDIATE but not AMPDU From the code comment I understand that this something that can - and does, quite frequently - happen. Signed-off-by: Eldad Zack <eldad@fogrefinery.com> Acked-by: Franky Lin<frankyl@broadcom.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-04-23rtlwifi: Fix oops on unloadLarry Finger
Under some circumstances, a PCI-based driver reports the following OOPs: Mar 19 08:14:35 kvothe kernel: [ 6584.626011] Oops: 0000 [#1] SMP --snip-- Mar 19 08:14:35 kvothe kernel: [ 6584.626011] Pid: 19627, comm: rmmod Not tainted 3.2.9-2.fc16.x86_64 #1 LENOVO 05962RU/05962RU Mar 19 08:14:35 kvothe kernel: [ 6584.626011] RIP: 0010:[<ffffffffa0418d39>] [<ffffffffa0418d39>] rtl92ce_get_desc+0x19/0xd0 [rtl8192ce] --snip-- Mar 19 08:14:35 kvothe kernel: [ 6584.626011] Process rmmod (pid: 19627, threadinfo ffff880050262000, task ffff8801156d5cc0) Mar 19 08:14:35 kvothe kernel: [ 6584.626011] Stack: Mar 19 08:14:35 kvothe kernel: [ 6584.626011] 0000000000000002 ffff8801176c2540 ffff880050263ca8 ffffffffa03348e7 Mar 19 08:14:35 kvothe kernel: [ 6584.626011] 0000000000000282 0000000180150014 ffff880050263fd8 ffff8801176c2810 Mar 19 08:14:35 kvothe kernel: [ 6584.626011] ffff880050263bc8 ffffffff810550e2 00000000000002c0 ffff8801176c0d40 Mar 19 08:14:35 kvothe kernel: [ 6584.626011] Call Trace: Mar 19 08:14:35 kvothe kernel: [ 6584.626011] [<ffffffffa03348e7>] _rtl_pci_rx_interrupt+0x187/0x650 [rtlwifi] --snip-- Mar 19 08:14:35 kvothe kernel: [ 6584.626011] Code: ff 09 d0 89 07 48 83 c4 08 5b 5d c3 66 0f 1f 44 00 00 55 48 89 e5 53 48 83 ec 08 66 66 66 66 90 40 84 f6 89 d3 74 13 84 d2 75 57 <8b> 07 48 83 c4 08 5b 5d c1 e8 1f c3 0f 1f 00 84 d2 74 ed 80 fa Mar 19 08:14:35 kvothe kernel: [ 6584.626011] RIP [<ffffffffa0418d39>] rtl92ce_get_desc+0x19/0xd0 [rtl8192ce] Mar 19 08:14:35 kvothe kernel: [ 6584.626011] RSP <ffff880050263b58> Mar 19 08:14:35 kvothe kernel: [ 6584.626011] CR2: 00000000000006e0 Mar 19 08:14:35 kvothe kernel: [ 6584.646491] ---[ end trace 8636c766dcfbe0e6 ]--- This oops is due to interrupts not being disabled in this particular path. Reported-by: Dave Airlie <airlied@gmail.com> Tested-by: Dave Airlie <airlied@gmail.com> Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Cc: Stable <stable@vger.kernel.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-04-23ipw2200: Fix race condition in the command completion acknowledgeStanislav Yakovlev
Driver incorrectly validates command completion: instead of waiting for a command to be acknowledged it continues execution. Most of the time driver gets acknowledge of the command completion in a tasklet before it executes the next one. But sometimes it sends the next command before it gets acknowledge for the previous one. In such a case one of the following error messages appear in the log: Failed to send SYSTEM_CONFIG: Already sending a command. Failed to send ASSOCIATE: Already sending a command. Failed to send TX_POWER: Already sending a command. After that you need to reload the driver to get it working again. This bug occurs during roaming (reported by Sam Varshavchik) https://bugzilla.redhat.com/show_bug.cgi?id=738508 and machine booting (reported by Tom Gundersen and Mads Kiilerich) https://bugs.archlinux.org/task/28097 https://bugzilla.redhat.com/show_bug.cgi?id=802106 This patch doesn't fix the delay issue during firmware load. But at least device now works as usual after boot. Cc: stable@kernel.org Signed-off-by: Stanislav Yakovlev <stas.yakovlev@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-04-23iwlwifi: do not nulify ctx->vif on resetStanislaw Gruszka
ctx->vif is dereferenced in different part of iwlwifi code, so do not nullify it. This should address at least one of the possible reasons of WARNING at iwlagn_mac_remove_interface, and perhaps some random crashes when firmware reset is performed. Cc: stable@vger.kernel.org Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com> Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-04-23ath9k: fix tx power settings for AR9287Gabor Juhos
The 'ath9k_hw_update_regulatory_maxpower' helper function has been introduced by commit a55f858852e4345d0a31af593c46738ca8614bff (ath9k_hw: Cleanup TX power calculation for AR9287). Updating of the max_power_level value has been moved into the helper function in that change, however the removed code from 'ath9k_hw_ar9287_set_txpower' has not been replaced with a call of the new helper function. Due to that missing call, retrieving tx power for 2x2 and 3x3 chainmask is not handled properly. During the calculation of the tx power for 2x2 and 3x3 chainmasks the values are reduced. Those reductions must be compensated during retrieving. Fix this by adding the missing call of the helper function. Signed-off-by: Gabor Juhos <juhosg@openwrt.org> Acked-by: Sujith Manoharan <c_manoha@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-04-23ath9k: add an extra boolean parameter to ath9k_hw_apply_txpowerGabor Juhos
In order to unifying regulatory limit handling commit ca2c68cc7bc80fc4504fb420df04cce99c9ee6ec (ath9k_hw: clean up tx power handling) introduced a new helper function 'ath9k_hw_apply_txpower', and the direct calls of 'ah->eep_ops->set_txpower' has been replaced by a call of the helper function. This caused a change in the behaviour of the 'ath9k_hw_set_txpowerlimit' function. The purpose of that function is to calculate and store the rate txpower table and the regulatory limit without touching the hardware registers. Before the commit, the 'test' parameter of the function was passed to the 'ah->eep_ops->set_txpower'. Now the calling of the 'set_txpower' function happens indirectly through 'ath9k_hw_apply_txpower', so the 'test' argument of the 'set_txpower' is always 'false'. This patch restores the original behaviour of 'ath9k_hw_set_txpowerlimit' by adding a new argument to 'ath9k_hw_apply_txpower.' Signed-off-by: Gabor Juhos <juhosg@openwrt.org> Acked-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-04-21drivers/net: Do not free an IRQ if its request failedLee Jones
Refrain from attempting to free an interrupt line if the request fails and hence, there is no IRQ to free. CC: netdev@vger.kernel.org Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-04-21ks8851: Fix request_irq/free_irq mismatchMatt Renzelmann
The dev_id parameter passed to free_irq needs to match the one passed to the corresponding request_irq. Signed-off-by: Matt Renzelmann <mjr@cs.wisc.edu> Acked-by: Stephen Boyd <sboyd@codeaurora.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-04-21net/hyperv: Adding cancellation to ensure rndis filter is closedWenqi Ma
Although the network interface is down, the RX packets number which could be observed by ifconfig may keep on increasing. This is because the WORK scheduled in netvsc_set_multicast_list() may be executed after netvsc_close(). That means the rndis filter may be re-enabled by do_set_multicast() even if it was closed by netvsc_close(). By canceling possible WORK before close the rndis filter, the issue could be never happened. Signed-off-by: Wenqi Ma <wenqi_ma@trendmicro.com.cn> Reviewed-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-04-21ks8851: Fix mutex deadlock in ks8851_net_stop()Stephen Boyd
There is a potential deadlock scenario when the ks8851 driver is removed. The interrupt handler schedules a workqueue which acquires a mutex that ks8851_net_stop() also acquires before flushing the workqueue. Previously lockdep wouldn't be able to find this problem but now that it has the support we can trigger this lockdep warning by rmmoding the driver after an ifconfig up. Fix the possible deadlock by disabling the interrupts in the chip and then release the lock across the workqueue flushing. The mutex is only there to proect the registers anyway so this should be ok. ======================================================= [ INFO: possible circular locking dependency detected ] 3.0.21-00021-g8b33780-dirty #2911 ------------------------------------------------------- rmmod/125 is trying to acquire lock: ((&ks->irq_work)){+.+...}, at: [<c019e0b8>] flush_work+0x0/0xac but task is already holding lock: (&ks->lock){+.+...}, at: [<bf00b850>] ks8851_net_stop+0x64/0x138 [ks8851] which lock already depends on the new lock. the existing dependency chain (in reverse order) is: -> #1 (&ks->lock){+.+...}: [<c01b89c8>] __lock_acquire+0x940/0x9f8 [<c01b9058>] lock_acquire+0x10c/0x130 [<c083dbec>] mutex_lock_nested+0x68/0x3dc [<bf00bd48>] ks8851_irq_work+0x24/0x46c [ks8851] [<c019c580>] process_one_work+0x2d8/0x518 [<c019cb98>] worker_thread+0x220/0x3a0 [<c01a2ad4>] kthread+0x88/0x94 [<c0107008>] kernel_thread_exit+0x0/0x8 -> #0 ((&ks->irq_work)){+.+...}: [<c01b7984>] validate_chain+0x914/0x1018 [<c01b89c8>] __lock_acquire+0x940/0x9f8 [<c01b9058>] lock_acquire+0x10c/0x130 [<c019e104>] flush_work+0x4c/0xac [<bf00b858>] ks8851_net_stop+0x6c/0x138 [ks8851] [<c06b209c>] __dev_close_many+0x98/0xcc [<c06b2174>] dev_close_many+0x68/0xd0 [<c06b22ec>] rollback_registered_many+0xcc/0x2b8 [<c06b2554>] rollback_registered+0x28/0x34 [<c06b25b8>] unregister_netdevice_queue+0x58/0x7c [<c06b25f4>] unregister_netdev+0x18/0x20 [<bf00c1f4>] ks8851_remove+0x64/0xb4 [ks8851] [<c049ddf0>] spi_drv_remove+0x18/0x1c [<c0468e98>] __device_release_driver+0x7c/0xbc [<c0468f64>] driver_detach+0x8c/0xb4 [<c0467f00>] bus_remove_driver+0xb8/0xe8 [<c01c1d20>] sys_delete_module+0x1e8/0x27c [<c0105ec0>] ret_fast_syscall+0x0/0x3c other info that might help us debug this: Possible unsafe locking scenario: CPU0 CPU1 ---- ---- lock(&ks->lock); lock((&ks->irq_work)); lock(&ks->lock); lock((&ks->irq_work)); *** DEADLOCK *** 4 locks held by rmmod/125: #0: (&__lockdep_no_validate__){+.+.+.}, at: [<c0468f44>] driver_detach+0x6c/0xb4 #1: (&__lockdep_no_validate__){+.+.+.}, at: [<c0468f50>] driver_detach+0x78/0xb4 #2: (rtnl_mutex){+.+.+.}, at: [<c06b25e8>] unregister_netdev+0xc/0x20 #3: (&ks->lock){+.+...}, at: [<bf00b850>] ks8851_net_stop+0x64/0x138 [ks8851] Cc: Ben Dooks <ben-linux@fluff.org> Signed-off-by: Stephen Boyd <sboyd@codeaurora.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-04-19icplus: fix interrupt for IC+ 101A/G and 1001LFGiuseppe CAVALLARO
This patch fixes and adds the irq handler for the IC+ 101A/G where we need to read the reg17 to clean the irq. Also remove the flag for the 1001LF where no interrupt can be used for this device. Signed-off-by: Giuseppe Cavallaro <peppe.cavallaro@st.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-04-19net: qmi_wwan: support Sierra Wireless MC77xx devices in QMI modeBjørn Mork
The MC77xx devices can operate in two modes: "Direct IP" or "QMI", switchable using a password protected AT command. Both product ID and USB interface configuration will change when switched. The "sierra_net" driver supports the "Direct IP" mode. This driver supports the "QMI" mode. There are also multiple possible USB interface configurations in each mode, some providing more than one wwan interface. Like many other devices made for Windows, different interface types are identified using a static interface number. We define a Sierra specific interface whitelist to support this. Signed-off-by: Bjørn Mork <bjorn@mork.no> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-04-19bnx2x: off by one in bnx2x_ets_e3b0_sp_pri_to_cos_set()Dan Carpenter
The sp_pri_to_cos[] array size depends on the config but lets say it is BX_E3B0_MAX_NUM_COS_PORT0 and max_num_of_cos is also DCBX_E3B0_MAX_NUM_COS_PORT0. In the original code "pri == max_num_of_cos" was accepted but it is one past the end of the array. Also we used "pri" before capping it. It's a harmless read past the end of the array, but it would affect which error message gets printed. Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Acked-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-04-19ksz884x: don't copy too much in netdev_set_mac_address()Dan Carpenter
MAX_ADDR_LEN is 32. ETH_ALEN is 6. mac->sa_data is a 14 byte array, so the memcpy() is doing a read past the end of the array. I asked about this on netdev and Ben Hutchings told me it's supposed to be copying ETH_ALEN bytes (thanks Ben). Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-04-18Merge branch 'master' of ↵John W. Linville
git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless into for-davem
2012-04-17Merge branch 'master' of ↵David S. Miller
git://git.kernel.org/pub/scm/linux/kernel/git/jkirsher/net
2012-04-17drivers/net/wan/farsync.c: add missing iounmapJulia Lawall
Free card->mem in the error-handling code since it was successfully allocated just above. Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-04-17davinci_mdio: Fix MDIO timeout checkChristian Riesch
Under heavy load (flood ping) it is possible for the MDIO timeout to expire before the loop checks the GO bit again. This patch adds an additional check whether the operation was done before actually returning -ETIMEDOUT. To reproduce this bug, flood ping the device, e.g., ping -f -l 1000 After some time, a "timed out waiting for user access" warning may appear. And even worse, link may go down since the PHY reported a timeout. Signed-off-by: Christian Riesch <christian.riesch@omicron.at> Cc: <stable@vger.kernel.org> Cc: Cyril Chemparathy <cyril@ti.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-04-17arcnet: rimi: Fix device name in debug outputJiri Kosina
arcrimi_probe() calls BUGMSG() before register_netdev() happens. BUGMSG() itself prints dev->name, but as the format string hasn't been expanded by register_netdev() yet, the output contains bogus device name such as arc%d: Given: node 00h, shmem 0h, irq 0 As we don't know the device name yet, just drop the prefix completely from the debugging messages. Reported-by: Steven Young <sdyoung@vt220.org> Signed-off-by: Jiri Kosina <jkosina@suse.cz> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-04-17ixgbe: Identify FCoE rings earlier to resolve memory corruption w/ FCoEAlexander Duyck
This patch makes it so that we identify FCoE rings earlier than ixgbe_set_rx_buffer_len. Instead we identify the Rx FCoE rings at allocation time in ixgbe_alloc_q_vector. The motivation behind this change is to avoid memory corruption when FCoE is enabled. Without this change we were initializing the rings at 0, and 2K on systems with 4K pages, then when we bumped the buffer size to 4K with order 1 pages we were accessing offsets 2K and 6K instead of 0 and 4K. This was resulting in memory corruptions. Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com> Acked-by: Yi Zou <yi.zou@intel.com> Tested-by: Ross Brattain <ross.b.brattain@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2012-04-17ixgbe: add missing rtnl_lock in PM resume pathBenjamin Poirier
Upon resume from standby, ixgbe may trigger the ASSERT_RTNL() in netif_set_real_num_tx_queues(). The call stack is: netif_set_real_num_tx_queues ixgbe_set_num_queues ixgbe_init_interrupt_scheme ixgbe_resume Signed-off-by: Benjamin Poirier <bpoirier@suse.de> Tested-by: Stephen Ko <stephen.s.ko@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2012-04-17ath9k: Fix TX fragmentationSujith Manoharan
Assigning sequence number for frames without taking care of the fragment field breaks transmission of fragmented frames. Fix this by assigning the fragment number properly. Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-04-16dummy: Add ndo_uninit().Hiroaki SHIMODA
In register_netdevice(), when ndo_init() is successful and later some error occurred, ndo_uninit() will be called. So dummy deivce is desirable to implement ndo_uninit() method to free percpu stats for this case. And, ndo_uninit() is also called along with dev->destructor() when device is unregistered, so in order to prevent dev->dstats from being freed twice, dev->destructor is modified to free_netdev(). Signed-off-by: Hiroaki SHIMODA <shimoda.hiroaki@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-04-16net: usb: smsc75xx: fix mtuStephane Fillod
Make smsc75xx recalculate the hard_mtu after adjusting the hard_header_len. Without this, usbnet adjusts the MTU down to 1492 bytes, and the host is unable to receive standard 1500-byte frames from the device. Inspired by same fix on cdc_eem 78fb72f7936c01d5b426c03a691eca082b03f2b9. Tested on ARM/Omap3 with EVB-LAN7500-LC. Signed-off-by: Stephane Fillod <fillods@users.sf.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-04-16can: usb: PCAN-USB Pro: fix mem leaks in pcan_usb_pro_init() on error pathsJesper Juhl
If either call to pcan_usb_pro_send_req() in drivers/net/can/usb/peak_usb/pcan_usb_pro.c::pcan_usb_pro_init() fails, we'll leak the memory we allocated to 'usb_if' with kzalloc() when the 'usb_if' variable goes out of scope without having been assigned to anything as we 'return err;'. Fix this by adding appropriate kfree(usb_if) calls to the error paths. Signed-off-by: Jesper Juhl <jj@chaosbits.net> Acked-by: Stephane Grosjean <s.grosjean@peak-system.com> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2012-04-14net/ethernet: ks8851_mll fix rx frame buffer overflowDavide Ciminaghi
At the beginning of ks_rcv(), a for loop retrieves the header information relevant to all the frames stored in the mac's internal buffers. The number of pending frames is stored as an 8 bits field in KS_RXFCTR. If interrupts are disabled long enough to allow for more than 32 frames to accumulate in the MAC's internal buffers, a buffer overflow occurs. This patch fixes the problem by making the driver's frame_head_info buffer big enough. Well actually, since the chip appears to have 12K of internal rx buffers and the shortest ethernet frame should be 64 bytes long, maybe the limit could be set to 12*1024/64 = 192 frames, but 255 should be safer. Signed-off-by: Davide Ciminaghi <ciminaghi@gnudd.com> Signed-off-by: Raffaele Recalcati <raffaele.recalcati@bticino.it> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-04-14ixgbe: fix WoL issue with fiberDon Skidmore
There are times we turn of the laser before shutdown. This is a bad thing if we want to wake on lan to work so now we make sure the laser is on before shutdown if we support WoL. Signed-off-by: Don Skidmore <donald.c.skidmore@intel.com> Tested-by: Stephen Ko <stephen.s.ko@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
generated by cgit v1.2.3 (git 2.39.1) at 2024-11-02 13:29:22 +0000