summaryrefslogtreecommitdiff
path: root/drivers/net
AgeCommit message (Collapse)Author
2011-04-04mwifiex: use IEEE80211_HT_CAP_ macros for 11n cap_infoMarc Yang
The hw_dot_11n_dev_cap reported by firmware hw_spec has different format than the 11n capabilities. Hence a lot of SET_ and RESET_ bit operation macros were used to convert the dev_cap format to 11n capability format. However the locally defined 11n ht_cap macros are not necessary as we can use IEEE80211_HT_CAP_ macros directly. The 32-bit dev_cap bitmap is added as comment to explain the mapping between firmware and 11n spec. Some unused macros and unnecessary adapter variables are also removed. Signed-off-by: Marc Yang <yangyang@marvell.com> Signed-off-by: Yogesh Ashok Powar <yogeshp@marvell.com> Signed-off-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-04-04mwifiex: remove macro SHORT_SLOT_TIME_DISABLEDBing Zhao
and SHORT_SLOT_TIME_ENABLED. Use WLAN_CAPABILITY_SHORT_SLOT_TIME instead. Signed-off-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-04-04mwifiex: remove unnecessary _set_auth functionsMarc Yang
mwifiex_set_encrypt_mode() mwifiex_set_auth_mode() mwifiex_set_auth() These functions are confusing and misleading. And they are really not needed at all. Some unused definitions are also removed. Signed-off-by: Marc Yang <yangyang@marvell.com> Signed-off-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-04-04mwifiex: remove helper functions for displaying 11n capabilitiesYogesh Ashok Powar
'iw list' is sufficient to retrieve the information which was displayed by these functions. Signed-off-by: Yogesh Ashok Powar <yogeshp@marvell.com> Signed-off-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-04-04ath9k_hw: remove ath9k_get_channel_edgesMohammed Shafi Shajakhan
This function is nowhere used. Signed-off-by: Mohammed Shafi Shajakhan <mshajakhan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-04-04ath9k: remove set11n_virtualmorefragMohammed Shafi Shajakhan
This does not seems to be used anywhere so remove it. Signed-off-by: Mohammed Shafi Shajakhan <mshajakhan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-04-04ath9k: cleanup few redundant macrosMohammed Shafi Shajakhan
Signed-off-by: Mohammed Shafi Shajakhan <mshajakhan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-04-04Merge branch 'wireless-next-2.6' of ↵John W. Linville
git://git.kernel.org/pub/scm/linux/kernel/git/iwlwifi/iwlwifi-2.6
2011-03-30ath9k_hw: remove pCap->tx_triglevel_maxFelix Fietkau
It has the same purpose (and value) as ah->config.max_txtrig_level Signed-off-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-03-30ath9k_hw: remove ATH9K_HW_CAP_ENHANCEDPMFelix Fietkau
It is not used anywhere Signed-off-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-03-30ath9k_hw: remove pCap->keycache_sizeFelix Fietkau
Similar to the number of tx queue, the number of keycache entries depends on the chip and shouldn't be messed with based on EEPROM data. Remove this field and stick to using AR_KEYTABLE_SIZE Signed-off-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-03-30ath9k_hw: remove pCap->reg_capFelix Fietkau
It is not used anywhere and seems pointless Signed-off-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-03-30ath9k_hw: remove ah->config.ht_enableFelix Fietkau
It is only used in one place, and the device id check that it's based on can be moved there as well. Signed-off-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-03-30ath9k_hw: remove pCap->total_queuesFelix Fietkau
The EEPROM contains a field that can restrict the number of hardware queues, however this is not only useless (all the known chips contain the same number of hardware queues), but also potentially dangerous in case of a misprogrammed EEPROM (could trigger driver crashes), so let's just ignore it completely. Signed-off-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-03-30ath9k_hw: turn a few big macros into functionsFelix Fietkau
RF_BANK_SETUP, REG_WRITE_RF_ARRAY and REG_WRITE_ARRAY are way too big, so they shouldn't be inlined at every single callsite, especially since they can easily be turned into real functions. Signed-off-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-03-30ath9k_hw: replace REG_READ+REG_WRITE with REG_RMWFelix Fietkau
It's easier to read and it slightly decreases code size Signed-off-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-03-30ath9k_hw: add a new register op for read-mask-writeFelix Fietkau
Reduces the number of calls to register ops. On MIPS this reduces the ath9k_hw binary size from 321k down to 310k Signed-off-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-03-30ath9k_hw: embed the ath_ops callbacks in the ath_hw structFelix Fietkau
With this change, loading the address to a register read/write function costs only one pointer dereference instead of two. On MIPS this reduces ath9k_hw binary size from 326k down to 321k. Signed-off-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-03-30ath9k: Support RSN IBSSJouni Malinen
Add support for using RSN IBSS with ath9k. For now, this uses software crypto for group addressed frames in RSN IBSS, but that may be optimized in the future by extending the key cache design to support per-STA RX GTK. Signed-off-by: Jouni Malinen <jouni.malinen@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-03-30ath9k: fix stuck beacon detectionFelix Fietkau
Stuck beacon detection is supposed to trigger when 9 consecutive beacons could not be sent by the hardware. When the driver runs only one active AP mode interface, it still configures the hardware beacon timer for 4 (ATH_BCBUF) beacon slots slots, which causes stuck beacon detection to be reset if ath9k_hw_stoptxdma clears the stuck frames between SWBA intervals. Fix this by not resetting the missed beacon count for empty slots and multiplying the threshold not by the maximum number of beacon slots but by the configured number of beacon interfaces. Signed-off-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-03-30ath9k: trigger nfcal only after multiple missed beacons in AP modeFelix Fietkau
Single missed (i.e. not transmitted) beacons in AP mode are not very rare and not necessarily an indicator of strong interference, so only trigger noise floor recalibration when multiple consecutive beacons could not be transmitted. Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-03-30ath9k: fix beacon timer handling issuesFelix Fietkau
AP mode beacon timers in ath9k are configured in milliseconds, which breaks when increasing ATH_BCBUF to 8 instead of 4 (due to rounding errors). Since the hardware timers are actually configured in microseconds, it's better to let the driver use that unit directly. To be able to do that, the beacon interval parameter abuse for passing certain flags needs to be removed. This is easy to do, because those flags are completely unnecessary anyway. ATH9K_BEACON_ENA is ignored, ATH9K_BEACON_RESET_TSF can be replaced with calling ath9k_hw_reset_tsf from the driver directly. Signed-off-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-03-30libertas_spi: Add support for suspend/resumeVasily Khoruzhick
Add support for suspend/resume in if_spi. Signed-off-by: Vasily Khoruzhick <anarsoul@gmail.com> Acked-by: Dan Williams <dcbw@redhat.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-03-30wireless: mwifiex: initial commit for Marvell mwifiex driverBing Zhao
This driver adds WiFi support for Marvell 802.11n based chipsets with SDIO interface. Currently only SD8787 is supported. More chipsets will be supported later. drivers/net/wireless/mwifiex/ Signed-off-by: Nishant Sarmukadam <nishants@marvell.com> Signed-off-by: Amitkumar Karwar <akarwar@marvell.com> Signed-off-by: Kiran Divekar <dkiran@marvell.com> Signed-off-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: Yogesh Ashok Powar <yogeshp@marvell.com> Signed-off-by: Marc Yang <yangyang@marvell.com> Signed-off-by: Ramesh Radhakrishnan <rramesh@marvell.com> Signed-off-by: Frank Huang <frankh@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-03-30ath9k_hw: remove AR9485 1.0 supportLuis R. Rodriguez
Only AR9485 1.1 was sold. This debloats the driver by ~14 KiB. text data bss dec hex filename 300413 624 1056 302093 49c0d drivers/net/wireless/ath/ath9k/ath9k_hw.ko text data bss dec hex filename 310285 624 1056 311965 4c29d drivers/net/wireless/ath/ath9k/ath9k_hw-old.ko $ du -b ath9k_hw* 6210541 ath9k_hw.ko 6225089 ath9k_hw-old.ko Cc: Bill Wu <bill.wu@atheros.com> Cc: Paul Shaw <paul.shaw@atheros.com> Cc: Forbes Tsai <Forbes.Tsai@Atheros.com> Cc: Jesmine Chen <jesmine.chen@atheros.com> Cc: Marvian Chen <Hou-hua.Chen@Atheros.com> Cc: Vivek Natarajan <vivek.natarajan@atheros.com> Cc: Bernadette Yetso <bernadette.yetso@atheros.com> Cc: Sarvesh Shrivastava <sarvesh.shrivastava@atheros.com> Acked-by: Yi-Chen Su <yi-chen.su@atheros.com> Acked-by: Jeffrey Chung <jeffrey.chung@atheros.com> Signed-off-by: Luis R. Rodriguez <lrodriguez@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-03-30ath9k: remove the pending frames ath_txq_schedule workaroundFelix Fietkau
This workaround called ath_txq_schedule whenever there were still pending frames for a queue, but the queue depth was zero. Because of its its high false positive probability (e.g. with paused TIDs) and because it is in the way of other pending work (AP powersave fixes), it is better to remove this code entirely. Signed-off-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-03-30ath9k_hw: force rx chainmask to 7 on AR9100Felix Fietkau
Most AR9100 devices already have a chainmask of 7 (three antennas), however on the ones that don't (rx and tx chainmask set to 5), problems with IQ mismatch calibration have been observed. This shows up as tx queue hangs (and subsequent hardware resets) if traffic is sent during this type of calibration. Forcing the rx chainmask to 7 fixes the calibration issues with no apparent negative side effects on throughput and stability. Signed-off-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-03-30ath9k_hw: enable a BlockAck related fixup specific to AR9100Felix Fietkau
Fixes interop issues with aggregation in combination with multi-BSSID Signed-off-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-03-30ath9k: add support for overriding LED pin and GPIO settings from platform dataFelix Fietkau
Signed-off-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-03-30ath9k: add support for overriding the MAC address through platform dataFelix Fietkau
On some devices the correct MAC address is not in the EEPROM data, but stored somewhere else. Signed-off-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-03-30ath9k: add an interface for overriding the value of specific GPIO pinsFelix Fietkau
Some devices control antenna settings or other things through GPIO pins of the wireless interface. Add a debugfs interface for changing those and keeping them set across card resets. Signed-off-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-03-30ath9k: remove unnecessary debugfs return code checksFelix Fietkau
Since the ath9k debugfs directory is cleaned up by debugfs_remove_recursive, there's no point in checking the return code of every single debugfs create line. Signed-off-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-03-30rtlwifi: rtl8192c{e,u}: Remove some extraneous casts on memcpy commandsLarry Finger
Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-03-30mwl8k: Queue ADDBA requests in respective data queuesNishant Sarmukadam
Queue ADDBA requests in respective data queues to avoid ADDBA requests and the the related data packets (to the same ra/tid) queued in the hardware to be sent out asynchronously. Signed-off-by: Nishant Sarmukadam <nishants@marvell.com> Signed-off-by: Brian Cavagnolo <brian@cozybit.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-03-30mwl8k: Check outgoing rate for a station to decide if ampdu can be createdNishant Sarmukadam
If the outgoing packet rate to a particular HT station is <=6.5 Mbps, do not attempt to create an ampdu. Also, if the outgoing rate is legacy rate, do not create an ampdu. Signed-off-by: Nishant Sarmukadam <nishants@marvell.com> Signed-off-by: Brian Cavagnolo <brian@cozybit.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-03-30mwl8k: Handle the watchdog event from the firmwareNishant Sarmukadam
When an ampdu stream is on, if the firmware rate adaptation logic decides that the outgoing packet rate to the station needs to go below 6.5Mbps (non HT rate), it sends an event indicating that the ampdu stream needs to be destroyed. Handle this event in the driver and destroy the ampdu stream so that the rate can go below 6.5Mbps Signed-off-by: Nishant Sarmukadam <nishants@marvell.com> Signed-off-by: Brian Cavagnolo <brian@cozybit.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-03-30mwl8k: Initiate BA sessionsNishant Sarmukadam
Specifically, handle ampdu_action and attempt to start a BA session on receiving the first qos packet from mac80211 for transmission to a HT sta. While the BA session is being created, all the packets belonging to that stream will be dropped to prevent sequence number mismatch at the recipient. Contains contributions from: Yogesh Powar <yogeshp@marvell.com> Pradeep Nemavat <pnemavat@marvell.com> Brian Cavagnolo <brian@cozybit.com> Signed-off-by: Brian Cavagnolo <brian@cozybit.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-03-30mwl8k: add internal API for managing AMPDU streamsBrian Cavagnolo
In particular, we can now add, start, lookup, and remove streams. Based on work by Nishant Sarmukadam <nishants@marvell.com> and Pradeep Nemavat <pnemavat@marvell.com>. Signed-off-by: Pradeep Nemavat <pnemavat@marvell.com> Signed-off-by: Nishant Sarmukadam <nishants@marvell.com> Signed-off-by: Brian Cavagnolo <brian@cozybit.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-03-30mwl8k: differentiate between WMM queues and AMPDU queuesBrian Cavagnolo
We now have two different kinds of queues. And the number of AMPDU queues may vary. So we must be clear about which queues we are dealing with. Note that when we report the number of queues to mac80211, we only report the WMM queues. Based on work by Yogesh Powar <yogeshp@marvell.com>. Signed-off-by: Brian Cavagnolo <brian@cozybit.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-03-30mwl8k: add support for block ack commandsNishant Sarmukadam
Signed-off-by: Pradeep Nemavat <pnemavat@marvell.com> Signed-off-by: Brian Cavagnolo <brian@cozybit.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-03-30mwl8k: update to ap firmware API version 2Brian Cavagnolo
Firmware APIv2 adds the following enhancements: -- capabilities are reported by the firmware -- API supports up to 8 dedicated AMPDU streams -- optional packet timestamping and expiration can be enabled. Specifically, packets that are queued in firmware for longer than 500ms will be dropped if this option is used. Based on work by "Nishant Sarmukadam" <nishants@marvell.com> Signed-off-by: Brian Cavagnolo <brian@cozybit.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-03-30mwl8k: refactor in preparation for APIv2 updateBrian Cavagnolo
Specifically, APIv2 will specify a variable number of AMPDU queues in the MWL8K_CMD_GET_HW_SPEC. So init the tx queues after MWL8K_CMD_GET_HW_SPEC for ap fw. Also, we make it safe to deinit queues that have not been init'd. This happens if the mwl8k_get_hw_spec_ap routine fails, for example. Signed-off-by: Nishant Sarmukadam <nishants@marvell.com> Signed-off-by: Brian Cavagnolo <brian@cozybit.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-03-30ath9k_hw: Speedup register ops for HTC driverRajkumar Manoharan
Fine-tuning register write operation and avoid unnecessay delays for ath9k_htc driver, saves hw reset time which improves scanning time and also solves one of the following scenario. Sometimes the ACK is sent by STA for assoc response is not seen at AP side. So the AP continues to send retry assoc responses. At the STA side, since the assoc response was already forwarded to mac80211, it proceeded to channel change which in turns does chip reset. In most of the cases the chip reset was completed before max retries are reached at AP side. Hence STA can able to ACK the retried frames again. But in clear environment these retries are completed within shortspan of time. Since ath9k_htc consumes more time for hw reset, this latency is causing dissociation by AP due to max reties are reached. This issue was originally reported with Cisco Aironet 1250 AP in HT40 mode in noise free environment. Signed-off-by: Rajkumar Manoharan <rmanoharan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-03-30ath: Speedup key set/reset ops for HTC driverRajkumar Manoharan
By enabling buffered register write for ath9k_htc driver avoids unnecessary dissociation while rekeying phase under heavy traffic exchange. Signed-off-by: Rajkumar Manoharan <rmanoharan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-03-30ath9k_hw: Fix throughput drops in HT40 mode for AR9287 chipsRajkumar Manoharan
Doing adc gain calibration for AR9287 chips is causing throughput drops in HT40 mode. Remove ADC Gain from supported calibration list. Signed-off-by: Rajkumar Manoharan <rmanoharan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-03-30ath9k_htc: Fix LED pin for AR9287 HTC deviceRajkumar Manoharan
Signed-off-by: Rajkumar Manoharan <rmanoharan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-03-30iwlwifi: remove duplicate initialization in __iwl_down()Dan Carpenter
We initialize exit_pending twice. It's the second initialization which is correct. That was added in d745d472af "iwlwifi: cancel scan when down the device". Signed-off-by: Dan Carpenter <error27@gmail.com> Acked-by: Wey-Yi Guy <wey-yi.w.guy@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-03-29Merge branch 'irq-final-for-linus-v2' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip * 'irq-final-for-linus-v2' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: (111 commits) gpio: ab8500: Mark broken genirq: Remove move_*irq leftovers genirq: Remove compat code drivers: Final irq namespace conversion mn10300: Use generic show_interrupts() mn10300: Cleanup irq_desc access mn10300: Convert genirq namespace frv: Use generic show_interrupts() frv: Convert genirq namespace frv: Select GENERIC_HARDIRQS_NO_DEPRECATED frv: Convert cpu irq_chip to new functions frv: Convert mb93493 irq_chip to new functions frv: Convert mb93093 irq_chip to new function frv: Convert mb93091 irq_chip to new functions frv: Fix typo from __do_IRQ overhaul frv: Remove stale irq_chip.end m68k: Convert irq function namespace xen: Use new irq_move functions xen: Cleanup genirq namespace unicore32: Use generic show_interrupts() ...
2011-03-29Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6Linus Torvalds
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6: (30 commits) xfrm: Restrict extended sequence numbers to esp xfrm: Check for esn buffer len in xfrm_new_ae xfrm: Assign esn pointers when cloning a state xfrm: Move the test on replay window size into the replay check functions netdev: bfin_mac: document TE setting in RMII modes drivers net: Fix declaration ordering in inline functions. cxgb3: Apply interrupt coalescing settings to all queues net: Always allocate at least 16 skb frags regardless of page size ipv4: Don't ip_rt_put() an error pointer in RAW sockets. net: fix ethtool->set_flags not intended -EINVAL return value mlx4_en: Fix loss of promiscuity tg3: Fix inline keyword usage tg3: use <linux/io.h> and <linux/uaccess.h> instead <asm/io.h> and <asm/uaccess.h> net: use CHECKSUM_NONE instead of magic number Net / jme: Do not use legacy PCI power management myri10ge: small rx_done refactoring bridge: notify applications if address of bridge device changes ipv4: Fix IP timestamp option (IPOPT_TS_PRESPEC) handling in ip_options_echo() can: c_can: Fix tx_bytes accounting can: c_can_platform: fix irq check in probe ...
2011-03-29drivers: Final irq namespace conversionThomas Gleixner
Scripted with coccinelle. Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
generated by cgit v1.2.3 (git 2.39.1) at 2024-08-03 02:43:37 +0000