summaryrefslogtreecommitdiff
path: root/drivers/pcmcia
AgeCommit message (Collapse)Author
2005-11-28[PATCH] m32r: M3A-2170(Mappi-III) IDE supportHirokazu Takata
This patch is for supporting IDE interface for M3A-2170(Mappi-III) board. Signed-off-by: Mamoru Sakugawa <sakugawa@linux-m32r.org> Signed-off-by: Hirokazu Takata <takata@linux-m32r.org> Cc: Bartlomiej Zolnierkiewicz <B.Zolnierkiewicz@elka.pw.edu.pl> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-12[PCMCIA] inform user of insertion and ejection eventsDominik Brodowski
Print out minimal information in dmesg whnever a CardBus or PCMCIA card is inserted into or ejected from a slot. This will make debugging certain types of bugs much easier, and is similar to output produced by other hotpluggable buses. Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
2005-11-12[PCMCIA] i82365: use new platform_device helpersDominik Brodowski
Use the new platform_device helpers in the i82365 driver to get rid of the "device 'i823650' does not have a release() function" warning, and to solve bug #3676. Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
2005-11-10[PCMCIA] i82365: release all resources if no devices are foundIgor Popik
The i82365 driver does not release all the resources when the device is not found. This can cause an oops when reading /proc/ioports after module unload. Signed-off-by: Igor Popik <igor.popik@gmail.com> Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
2005-11-10[PCMCIA] MPC8xx PCMCIA updateMarcelo Tosatti
Kconfig entry: dependency on 8xx Makefile: fix whitespace breakage m8xx_pcmcia.c: - asm/segment.h is gone - use generic PCMCIA suspend/resume methods Signed-off-by: Marcelo Tosatti <marcelo.tosatti@cyclades.com> Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
2005-11-10[PATCH] Alchemy PCMCIA: Fix config.h inclusionRalf Baechle
Add rsp. remove the inclusion of <linux/config.h> as needed. Signed-off-by: Ralf Baechle <ralf@linux-mips.org> Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
2005-11-09[PATCH] changing CONFIG_LOCALVERSION rebuilds too much, for no good reasonOlaf Hering
This patch removes almost all inclusions of linux/version.h. The 3 #defines are unused in most of the touched files. A few drivers use the simple KERNEL_VERSION(a,b,c) macro, which is unfortunatly in linux/version.h. There are also lots of #ifdef for long obsolete kernels, this was not touched. In a few places, the linux/version.h include was move to where the LINUX_VERSION_CODE was used. quilt vi `find * -type f -name "*.[ch]"|xargs grep -El '(UTS_RELEASE|LINUX_VERSION_CODE|KERNEL_VERSION|linux/version.h)'|grep -Ev '(/(boot|coda|drm)/|~$)'` search pattern: /UTS_RELEASE\|LINUX_VERSION_CODE\|KERNEL_VERSION\|linux\/\(utsname\|version\).h Signed-off-by: Olaf Hering <olh@suse.de> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-08[ARM] 3093/1: SharpSL PCMCIA Updates for Cxx00 modelsRichard Purdie
Patch from Richard Purdie The Sharp SL-Cxx00 models have a combined power control for the SD and CF slot 0. This patch adds hooks to the scoop driver to allow machines to provide a custom control function for this and such a function is added for spitz/akita/borzoi. It also moves the gpio init code into the machine files as this is machine dependent and differs between some models. A couple of warnings when compiling for collie are also fixed. Signed-off-by: Richard Purdie Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2005-11-07[PATCH] kfree cleanup: misc remaining driversJesper Juhl
This is the remaining misc drivers/ part of the big kfree cleanup patch. Remove pointless checks for NULL prior to calling kfree() in misc files in drivers/. Signed-off-by: Jesper Juhl <jesper.juhl@gmail.com> Acked-by: Aristeu Sergio Rozanski Filho <aris@cathedrallabs.org> Acked-by: Roland Dreier <rolandd@cisco.com> Acked-by: Pierre Ossman <drzeus@drzeus.cx> Acked-by: Jean Delvare <khali@linux-fr.org> Acked-by: Greg Kroah-Hartman <gregkh@suse.de> Acked-by: Len Brown <len.brown@intel.com> Acked-by: "Antonino A. Daplas" <adaplas@gmail.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-10-31Merge master.kernel.org:/home/rmk/linux-2.6-drvmodelLinus Torvalds
Manual #include fixups for clashes - there may be some unnecessary
2005-10-31Merge ../linux-2.6 by handPaul Mackerras
2005-10-30Merge master.kernel.org:/home/rmk/linux-2.6-armLinus Torvalds
2005-10-30[PATCH] CONFIG_IA32Brian Gerst
Add CONFIG_X86_32 for i386. This allows selecting options that only apply to 32-bit systems. (X86 && !X86_64) becomes X86_32 (X86 || X86_64) becomes X86 Signed-off-by: Brian Gerst <bgerst@didntduck.org> Cc: Sam Ravnborg <sam@ravnborg.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-10-30[ARM] Support pcmcia slot on sharp sl-5500Pavel Machek
This adds support for pcmcia slot on sharp zaurus sl-5500. pxa2xx_sharpsl.c thus becomes quite miss-named, but I guess that is not worth fixing? Signed-off-by: Pavel Machek <pavel@suse.cz> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2005-10-29Updated pcmcia driver with pb1200 and db1200 support.Pete Popov
Updated db1200_defconfig so pcmcia is enabled by default. Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2005-10-29- moved platform structure to platform.cPete Popov
- fixed an iounmap warning - export fixup_xx, needed by the module Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2005-10-29Create platform_device.h to contain all the platform device details.Russell King
Convert everyone who uses platform_bus_type to include linux/platform_device.h. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk> Acked-by: Greg Kroah-Hartman <gregkh@suse.de>
2005-10-29[PATCH] MPC8xx PCMCIA driverMarcelo Tosatti
Here is an uptodated version of the MPC8xx PCMCIA driver for v2.6, addressing comments by Jeff and Dominik: - use IO accessors instead of direct device memory referencing - avoid usage of non-standard "uint/uchar" data types - kill struct typedef's Will submit it for inclusion once v2.6.14 is out. Testing on 8xx platforms is more than welcome! Works like a charm on our custom hardware (CONFIG_PRxK). Cc: Dominik Brodowski <linux@dominikbrodowski.net> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-10-28pcmcia: add socket register data to sysfs for yenta devicesLinus Torvalds
It's simple, and it's a good debugging aid. Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-10-28Merge ../bleed-2.6Greg KH
2005-10-28[PATCH] DRIVER MODEL: Get rid of the obsolete tri-level suspend/resume callbacksRussell King
In PM v1, all devices were called at SUSPEND_DISABLE level. Then all devices were called at SUSPEND_SAVE_STATE level, and finally SUSPEND_POWER_DOWN level. However, with PM v2, to maintain compatibility for platform devices, I arranged for the PM v2 suspend/resume callbacks to call the old PM v1 suspend/resume callbacks three times with each level in order so that existing drivers continued to work. Since this is obsolete infrastructure which is no longer necessary, we can remove it. Here's an (untested) patch to do exactly that. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2005-10-28[PATCH] Driver core: pass interface to class interface methodsDmitry Torokhov
Driver core: pass interface to class intreface methods Pass interface as argument to add() and remove() class interface methods. This way a subsystem can implement generic add/remove handlers and then call interface-specific ones. Signed-off-by: Dmitry Torokhov <dtor@mail.ru> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2005-10-28[ARM] Fix sparse warningsRussell King
Fix sparse warnings in arch/arm/kernel/module.c, arch/arm/mm/consistent.c, drivers/pcmcia/sa1111_generic.c, and platform support files. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2005-10-14[PATCH] zaurus: fix soc_common.cPavel Machek
This fixes wrong comments, non-working debug subsystem, and some potentially dangerous macros. Signed-off-by: Pavel Machek <pavel@suse.cz> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-10-10[PATCH] pcmcia: fix task state at pccard thread exitSteven Rostedt
The pccardd thread has a race in it that it can shutdown in the TASK_INTERRUPTIBLE state. Make sure we mark ourselves runnable again as we remove ourselves from the wait queue. Signed-off-by: Steven Rostedt <rostedt@goodmis.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-10-08[PATCH] yenta: fix build if YENTA && !CARDBUSDavid Vrabel
(struct pcmcia_socket).tune_bridge only exists if CONFIG_CARDBUS is set but building yenta_socket without CardBus is valid. Signed-off-by: David Vrabel <dvrabel@arcom.com> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-30Merge master.kernel.org:/home/rmk/linux-2.6-armLinus Torvalds
2005-09-29[ARM] Don't include mach-types.h unnecessarilyRussell King
It's pointless to include mach-types.h if you're not going to use anything from it. These references were removed as a result of: grep -lr 'asm/mach-types\.h' . | xargs grep -L 'machine_is_\|MACH_TYPE_\|MACHINE_START\|machine_type' Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2005-09-28[PATCH] pcmcia: only start up nonstatic sockets if both mem and io are availableDominik Brodowski
Only start up nonstatic sockets if both IO and MEM resources are available. Thanks to Russell King and Matthew Wilcox for tracking this down. Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
2005-09-28[PATCH] pcmcia: allow one port excludesDominik Brodowski
Allow for excluding only one port in /etc/pcmcia/config.otps Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
2005-09-26[PATCH] yenta: more ENE bridgesDaniel Ritz
Adds better support for the CB-710, CB-712, CB-720 and CB-722 bridges from EnE Signed-off-by: Daniel Ritz <daniel.ritz@gmx.ch> Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
2005-09-26[PATCH] yenta: add support for more TI bridgesDaniel Ritz
Support some more TI cardbus bridges. most of them are multifunction devices which adds 1394 controllers, smartcard readers etc. this could also help with the various problems with the XX21 controllers seen on the linux-pcmcia list. Signed-off-by: Daniel Ritz <daniel.ritz@gmx.ch> Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
2005-09-26[PATCH] pcmcia: fix Kconfig dependencyKomuro
TCIC depends on ISA. It is used with ISA-bus system only. Signed-off-by: komurojun-mbn@nifty.com Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
2005-09-26[PATCH] yenta: tiny cleanupDominik Brodowski
pci_set_power_state is not needed, as we call pci_enable_device() somewhere else. Also, the resource we write to PCI_BASE_ADDRESS_0 needs to be converted to bus-centric view first. Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
2005-09-26[PATCH] yenta: don't mess with bridge control registerDaniel Ritz
In interrupt probing (both ISA and PCI) the bridge control register is used to change interrupt routing to ISA or PCI by changing bit 7. But this bit only controls the routing of card functional interrupts, not the CSC interrupts which are used for interrupt probing. A bad side effect of messing with this register in yenta_probe_irq() is that it can lead to irq storms if a card is inserted and already powered by the BIOS. Usage in yenta_sock_init() and yenta_config_init() seem to be fishy as well. Signed-off-by: Daniel Ritz <daniel.ritz@gmx.ch> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
2005-09-26[PATCH] yenta: auto-tune EnE bridges for CardBus cardsDaniel Ritz
Echo Audio cardbus products are known to be incompatible with EnE bridges. in order to maybe solve the problem a EnE specific test bit has to be set, another cleared...but other setups have a good chance to break when just forcing the bits. so do the whole thingy automatically. The patch adds a hook in cb_alloc() that allows special tuning for the different chipsets. for ene just match the Echo products and set/clear the test bits, defaults to do the same thing as w/o the patch to not break working setups. Signed-off-by: Daniel Ritz <daniel.ritz@gmx.ch> Cc: Linus Torvalds <torvalds@osdl.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
2005-09-14Fix yenta error message when unable to find a bus assignmentLinus Torvalds
And mention 'pci=assign-busses' as a possible fix. Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-14[PATCH] yenta oops fixIvan Kokshaysky
In some cases, especially on modern laptops with a lot of PCI and cardbus bridges, we're unable to assign correct secondary/subordinate bus numbers to all cardbus bridges due to BIOS limitations unless we are using "pci=assign-busses" boot option. So some cardbus controllers may not have attached subordinate pci_bus structure, and yenta driver must cope with it - just ignore such cardbus bridges. For example, see https://bugzilla.novell.com/show_bug.cgi?id=113778 Signed-off-by: Ivan Kokshaysky <ink@jurassic.park.msu.ru> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-13[PATCH] pcmcia: warn on IOCTL usageDominik Brodowski
More visible user information of scheduled feature removal. Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-09[PATCH] pcmcia: add pcmcia to IRQ informationBrice Goglin
Add a devname parameter to the pcmcia_device structure, fills it with "pcmcia<bus_id>" in pcmcia_device_add, and passes it to request_irq in pcmcia_request_irq. Signed-off-by: Brice Goglin <Brice.Goglin@ens-lyon.org> Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-09[PATCH] pcmcia: OMAP CF controllerDavid Brownell
This adds a socket driver for the OMAP CF controller; it's currently in use on OSK boards. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-09[PATCH] pcmcia: remove unused Vpp1, Vpp2 and VccDominik Brodowski
config_t->Vpp1, Vpp2 and Vcc are never read, so remove them. Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-09[PATCH] pcmcia: remove unused client_tDominik Brodowski
client_t and CLIENT_MAGIC are unused, so remove them Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-09[PATCH] pcmcia/yenta: avoid PCI write posting problemDaniel Ritz
extend cb_writel(), exca_writeb(), exca_writel() to do a read[lb]() after the write[lb]() to avoid possible problem with PCI write posting. Seems to fix Bug #5061. Signed-off-by: Daniel Ritz <daniel.ritz@gmx.ch> Cc: Dominik Brodowski <linux@dominikbrodowski.net> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-09[PATCH] fix pcmcia_request_irq() for multifunction cardDaniel Ritz
multifunction cards need to have the same irq assigned to both functions. the code tries that but fails because ret is still set to CS_IN_USE which results in the function having the CB irq assigned. yenta_set_socket then just changes the irq routing to use the PCI interrupt but the first functions irq handler is registered on an ISA interrupt. boom. Signed-off-by: Daniel Ritz <daniel.ritz@gmx.ch> Cc: Dominik Brodowski <linux@dominikbrodowski.net> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-09[PATCH] pcmcia/cs: fix possible missed wakeupDaniel Ritz
- thread_done should only be completed when the wait_queue is installed. - all wake up conditions should be checked before schedule() this fixes a hang of rmmod in the sequence modprobe yenta_socket; rmmod yenta_socket as reported by Andreas Steinmetz. w/o this rmmod yenta_socket can hang on wait_for_completion() in pcmcia_unregister_socket() Signed-off-by: Daniel Ritz <daniel.ritz@gmx.ch> Cc: Dominik Brodowski <linux@brodo.de> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-09[PATCH] yenta: share code with PCI coreDominik Brodowski
Share code between setup-bus.c and yenta_socket.c: use the write-out code of resources to the bridge also in yenta_socket.c, as it provides useful debug output. In addition, it fixes the bug that the CPU-centric resource view might need to be transferred to the PCI-centric view: setup-bus.c does that, while yenta-socket.c did not. Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-09[PATCH] pcmcia: reduce ds.c stack footprintIngo Molnar
This patch reduces the stack footprint of pcmcia_device_query() from 416 bytes to 36 bytes. Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-07[PATCH] yenta: make ToPIC95 bridges work with 16bit cardsDaniel Ritz
ToPIC95 brides (and maybe some other too) require to use the ExCA registers to power up the socket if a 16bit card is pluged. allow socket drivers to set a flag so that yenta does just that. also clean up yenta_get_status() a bit to use the new yenta_get_power() function. Side note: ToPIC97 bridges (at least in Rev.5 i have) don't require this. Ryan Underwood <nemesis-lists@icequake.net> said: According to the mail that David Hinds received from a Toshiba engineer, ToPIC95 and 97 do require this, and ToPIC100 does not. Maybe you have a later revision. For all chips, 16-bit cards can be enabled through ExCA. So doesn't it make sense just to make this the default behavior for all Toshiba chips, to avoid corner cases showing up later? Daniel responded: I disagree with ryan to change anything for topic97 bridges. they work. and I couldn't find (read google) any report of a topic97 breaking on applying power with the CB registers. I'm having several toshba notebooks at work (and home) with topic95,97,100 bridges. Only the ones with a topic95 didn't work. Signed-off-by: Daniel Ritz <daniel.ritz@gmx.ch> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-05[ARM] 2882/1: pxa2xx_sharpsl: Update PCMCIA driver to support variety of new ↵Richard Purdie
hardware Patch from Richard Purdie This patch updates the PCMCIA pxa2xx_sharpsl driver to support multiple scoop devices by adding a scoop to pcmcia slot mapping structure. It adds platform support for poodle, is known to work on spitz (which is dual slot) and should also support collie with a minor amount of further work. Signed-off-by: Richard Purdie <rpurdie@rpsys.net> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>