summaryrefslogtreecommitdiff
path: root/drivers/platform/x86/Kconfig
AgeCommit message (Collapse)Author
2011-05-27acerhdf: Drop pointless dependency on THERMAL_HWMONJean Delvare
The THERMAL_HWMON config option simply exposes the thermal zone temperature values and limits to user-space. It makes no sense for a kernel driver to depend on this. Signed-off-by: Jean Delvare <khali@linux-fr.org> Cc: Peter Feuerer <peter@piie.net> Cc: Matthew Garrett <mjg@redhat.com> Signed-off-by: Matthew Garrett <mjg@redhat.com>
2011-05-27platform/oaktrail: ACPI EC Extra driver for OaktrailYin Kangkai
This driver implements an Extra ACPI EC driver for products based on Intel Oaktrail platform. This driver does below things: 1. registers itself in the Linux backlight control in /sys/class/backlight/intel_oaktrail/ 2. registers in the rfkill subsystem here: /sys/class/rfkill/rfkillX/ for these components: wifi, bluetooth, wwan (3g), gps Signed-off-by: Yin Kangkai <kangkai.yin@linux.intel.com> [Extracted from a bigger patch by Yin Kangkai, this version leaves out some sysfs bits that probably want to be driver managed, and ACPI i2c enumeration] Signed-off-by: Alan Cox <alan@linux.intel.com> Signed-off-by: Matthew Garrett <mjg@redhat.com>
2011-05-24Merge branch 'drm-core-next' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/airlied/drm-2.6 * 'drm-core-next' of git://git.kernel.org/pub/scm/linux/kernel/git/airlied/drm-2.6: (169 commits) drivers/gpu/drm/radeon/atom.c: fix warning drm/radeon/kms: bump kms version number drm/radeon/kms: properly set num banks for fusion asics drm/radeon/kms/atom: move dig phy init out of modesetting drm/radeon/kms/cayman: fix typo in register mask drm/radeon/kms: fix typo in spread spectrum code drm/radeon/kms: fix tile_config value reported to userspace on cayman. drm/radeon/kms: fix incorrect comparison in cayman setup code. drm/radeon/kms: add wait idle ioctl for eg->cayman drm/radeon/cayman: setup hdp to invalidate and flush when asked drm/radeon/evergreen/btc/fusion: setup hdp to invalidate and flush when asked agp/uninorth: Fix lockups with radeon KMS and >1x. drm/radeon/kms: the SS_Id field in the LCD table if for LVDS only drm/radeon/kms: properly set the CLK_REF bit for DCE3 devices drm/radeon/kms: fixup eDP connector handling drm/radeon/kms: bail early for eDP in hotplug callback drm/radeon/kms: simplify hotplug handler logic drm/radeon/kms: rewrite DP handling drm/radeon/kms/atom: add support for setting DP panel mode drm/radeon/kms: atombios.h updates for DP panel mode ...
2011-05-17Kconfig: fix copy/paste-ism for dell-wmi-aio driverRafi Rubin
Signed-off-by: Rafi Rubin <rafi@seas.upenn.edu> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2011-05-09drm/mxm: fix Kconfig options for when to build MXM WMI driver.Dave Airlie
Signed-off-by: Dave Airlie <airlied@redhat.com>
2011-05-04platform/x86: add MXM WMI driver.Dave Airlie
MXM is a laptop graphics card form-factor + interface specification, this adds an initial stub driver to talk to the MXM WMI interface. The only method used is the MUX switching method needed to do switchable graphics on the nvidia chipsets. Signed-off-by: Dave Airlie <airlied@redhat.com> Acked-by: Matthew Garrett <mjg@redhat.com>
2011-04-01msi-laptop: fix config-dependent build errorRandy Dunlap
The msi-laptop driver uses input_*() and sparse_keymap_*() interfaces. It should depend on the INPUT subsystem being present and select INPUT_SPARSEKMAP so that those interfaces are present. ERROR: "input_free_device" [drivers/platform/x86/msi-laptop.ko] undefined! ERROR: "input_register_device" [drivers/platform/x86/msi-laptop.ko] undefined! ERROR: "sparse_keymap_setup" [drivers/platform/x86/msi-laptop.ko] undefined! ERROR: "input_allocate_device" [drivers/platform/x86/msi-laptop.ko] undefined! ERROR: "sparse_keymap_report_event" [drivers/platform/x86/msi-laptop.ko] undefined! ERROR: "input_unregister_device" [drivers/platform/x86/msi-laptop.ko] undefined! ERROR: "sparse_keymap_free" [drivers/platform/x86/msi-laptop.ko] undefined! Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com> Cc: Matthew Garrett <mjg@redhat.com> Cc: "Lee, Chun-Yi" <jlee@novell.com> Signed-off-by: Matthew Garrett <mjg@redhat.com>
2011-03-28Platform: add Samsung Laptop platform driverGreg Kroah-Hartman
This adds the samsung-laptop driver to the kernel. It now supports all known Samsung laptops that use the SABI interface. Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> Signed-off-by: Matthew Garrett <mjg@redhat.com>
2011-03-28eeepc-wmi: kconfig changes to fix build errorsRandy Dunlap
Fix eeepc-wmi build when CONFIG_HOTPLUG_PCI is not enabled: eeepc-wmi.c:(.text+0x3bc5e9): undefined reference to `pci_hp_deregister' eeepc-wmi.c:(.text+0x3bcca4): undefined reference to `__pci_hp_register' Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com> Signed-off-by: Matthew Garrett <mjg@redhat.com>
2011-03-28asus-wmi: add hwmon interface and pwm1Corentin Chary
Signed-off-by: Corentin Chary <corentincj@iksaif.net> Signed-off-by: Matthew Garrett <mjg@redhat.com>
2011-03-28asus-nb-wmi: Asus Notebooks WMI DriverCorentin Chary
Introduce a new driver for Asus Notebooks shipped with a WMI device instead of the old ACPI device. The WMI device is almost the same as the one present in Eee PC, but the event guid and the keymap are different. The keymap comes from asus-laptop module. On Asus notebooks, when you call the WMI device, you always need a 64bit buffer, even if you only want to get the state of a device (tested on a G73). Signed-off-by: Corentin Chary <corentincj@iksaif.net> Signed-off-by: Matthew Garrett <mjg@redhat.com>
2011-03-28eeepc-wmi: asus generic asus-wmi.ko moduleCorentin Chary
New Asus notebooks are using a WMI device similar to the one used in Eee PCs. Since we don't want to load eeepc-wmi module on Asus notebooks, and we want to keep the eeepc-wmi module for backward compatibility, this patch introduce a new module, named asus-wmi, that will be used by eeepc-wmi and the new Asus Notebook WMI Driver. eeepc-wmi's input device strings (device name and phys) are kept, but rfkill and led names are changed (s/eeepc/asus/). This should not break anything since rfkill are used by type or index, not by name, and the eeepc::touchpad led wasn't working correctly before 2.6.39 anyway. Signed-off-by: Corentin Chary <corentincj@iksaif.net> Signed-off-by: Matthew Garrett <mjg@redhat.com>
2011-03-28medfield: Add Thermal DriverDurgadoss R
This is the basic thermal sensor driver for Intel MID platform using the Medfield chipset. It plugs in via the thermal drivers and provides sensor readings for the device sensors. Signed-off-by: Durgadoss R <durgadoss.r@intel.com> Signed-off-by: Alan Cox <alan@linux.intel.com> Signed-off-by: Matthew Garrett <mjg@redhat.com>
2011-03-28platform/x86: intel_mid_powerbutton needs INPUTRandy Dunlap
intel_mid_powerbtn.c uses input interfaces, so it should depend on INPUT to fix build errors when CONFIG_INPUT is not enabled: intel_mid_powerbtn.c:(.text+0x56ca8f): undefined reference to `input_event' intel_mid_powerbtn.c:(.devinit.text+0x2e7b4): undefined reference to `input_allocate_device' intel_mid_powerbtn.c:(.devinit.text+0x2e7ff): undefined reference to `input_set_capability' intel_mid_powerbtn.c:(.devinit.text+0x2e84a): undefined reference to `input_register_device' intel_mid_powerbtn.c:(.devinit.text+0x2e88b): undefined reference to `input_free_device' intel_mid_powerbtn.c:(.devexit.text+0x42f0): undefined reference to `input_unregister_device' Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com> Cc: Hong Liu <hong.liu@intel.com> Signed-off-by: Matthew Garrett <mjg@redhat.com>
2011-03-28Enable Dell All-In-One volume up/down keysColin Ian King
Enable volume up and down hotkeys on WMI events GUID 284A0E6B-380E-472A-921F-E52786257FB4 and GUID 02314822-307C-4F66-bf0E-48AEAEB26CC8. Also works around a firmware bug where the _WED method should return an integer containing the key code and in fact the method returns the key code in element zero of a buffer. BugLink: http://bugs.launchpad.net/bugs/701530 BugLink: http://bugs.launchpad.net/bugs/676997 Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: Matthew Garrett <mjg@redhat.com>
2011-03-28intel_mid_powerbtn: add power button driver for Medfield platform (#3)Hong Liu
The power button is connected to MSIC on Medfield, we will get two interrupts from IOAPIC when pressing or releasing the power button. Signed-off-by: Hong Liu <hong.liu@intel.com> [Minor fixes as noted by Dmitry] Signed-off-by: Alan Cox <alan@linux.intel.com> Acked-by: Dmitry Torokhov <dtor@mail.ru> Signed-off-by: Matthew Garrett <mjg@redhat.com>
2011-03-28OLPC XO-1.5 ebook switch driverPaul Fox
The OLPC XO-1.5 has an ebook switch, triggered when the laptop screen is rotated then folding down, converting the device into ebook form. This switch is exposed through ACPI. Add a driver that exposes it to userspace as an input device. Signed-off-by: Daniel Drake <dsd@laptop.org> Acked-by: Dmitry Torokhov <dtor@mail.ru> Signed-off-by: Matthew Garrett <mjg@redhat.com>
2011-03-21Move hp_accel to drivers/platform/x86Jean Delvare
The hp_accel driver isn't a hardware monitoring driver, so it doesn't belong to drivers/hwmon. Move it to drivers/platform/x86, assuming HP doesn't ship non-x86 laptops. Signed-off-by: Jean Delvare <khali@linux-fr.org> Acked-by: Guenter Roeck <guenter.roeck@ericsson.com> Acked-by: Eric Piel <eric.piel@tremplin-utc.net> Acked-by: Jonathan Cameron <jic23@cam.ac.uk> Tested-by: Eric Piel <eric.piel@tremplin-utc.net> Tested-by: Takashi Iwai <tiwai@suse.de>
2011-02-21platform/x86: ideapad-laptop depends on INPUTRandy Dunlap
Most platform/x86 drivers that use INPUT_SPARSEKMAP also depend on INPUT, so do the same for ideapad-laptop. This fixes a kconfig warning and subsequent build errors when CONFIG_INPUT is disabled. warning: (ACER_WMI && ASUS_LAPTOP && DELL_WMI && HP_WMI && PANASONIC_LAPTOP && IDEAPAD_LAPTOP && EEEPC_LAPTOP && EEEPC_WMI && MSI_WMI && TOPSTAR_LAPTOP && ACPI_TOSHIBA) selects INPUT_SPARSEKMAP which has unmet direct dependencies (!S390 && INPUT) ERROR: "input_free_device" [drivers/platform/x86/ideapad-laptop.ko] undefined! ERROR: "input_register_device" [drivers/platform/x86/ideapad-laptop.ko] undefined! ERROR: "sparse_keymap_setup" [drivers/platform/x86/ideapad-laptop.ko] undefined! ERROR: "input_allocate_device" [drivers/platform/x86/ideapad-laptop.ko] undefined! ERROR: "input_unregister_device" [drivers/platform/x86/ideapad-laptop.ko] undefined! ERROR: "sparse_keymap_free" [drivers/platform/x86/ideapad-laptop.ko] undefined! ERROR: "sparse_keymap_report_event" [drivers/platform/x86/ideapad-laptop.ko] undefined! Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com> Cc: David Woodhouse <dwmw2@infradead.org> Cc: Matthew Garrett <mjg@redhat.com> Cc: platform-driver-x86@vger.kernel.org Signed-off-by: Matthew Garrett <mjg@redhat.com>
2011-01-10platform/x86: Consistently select LEDS Kconfig optionsMark Brown
Currently the x86 platform devices are not consistent about selecting or depending on the LEDs Kconfig variables, and this inconsistency leads to Kconfig getting upset and refusing to offer LEDs (even on non-x86 platforms): drivers/platform/x86/Kconfig:422:error: recursive dependency detected! drivers/platform/x86/Kconfig:422: symbol EEEPC_WMI depends on ACPI_WMI drivers/platform/x86/Kconfig:438: symbol ACPI_WMI is selected by ACER_WMI drivers/platform/x86/Kconfig:18: symbol ACER_WMI depends on LEDS_CLASS drivers/leds/Kconfig:10: symbol LEDS_CLASS is selected by EEEPC_WMI Fix this by always selecting rather than depending on the symbols as slightly more drivers use this approach already and it seems more user friendly. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Matthew Garrett <mjg@redhat.com>
2011-01-07acer-wmi: Add acer wmi hotkey events supportLee, Chun-Yi
Add acer wmi hotkey event support. Install a wmi notify handler to transfer wmi event key to key code, then send out keycode through acer wmi input device to userland. Signed-off-by: Lee, Chun-Yi <jlee@novell.com> Acked-by: Dmitry Torokhov <dtor@mail.ru> Acked-by: Thomas Renninger <trenn@suse.de> Acked-by: Jiri Benc <jbenc@suse.cz> Signed-off-by: Carlos Corbacho <carlos@strangeworlds.co.uk> Cc: Corentin Chary <corentincj@iksaif.net> Signed-off-by: Matthew Garrett <mjg@redhat.com>
2011-01-07platform/x86: Kconfig: Replace select by depends on ACPI_WMISedat Dilek
With 'make oldnoconfig' I see these warnings in linux-next (next-20101208): drivers/platform/x86/Kconfig:422:error: recursive dependency detected! drivers/platform/x86/Kconfig:422: symbol EEEPC_WMI depends on ACPI_WMI drivers/platform/x86/Kconfig:438: symbol ACPI_WMI is selected by ACER_WMI drivers/platform/x86/Kconfig:18: symbol ACER_WMI depends on LEDS_CLASS drivers/leds/Kconfig:10: symbol LEDS_CLASS is selected by EEEPC_WMI This patch replaces all "select on ACPI_WMI" by "depends on ACPI_WMI". Quote from David Woodhouse: "A better policy is: "NEVER USE SELECT"." Reported-and-tested-by: Sedat Dilek <sedat.dilek@gmail.com> Signed-off-by: Sedat Dilek <sedat.dilek@gmail.com> Acked-by: Randy Dunlap <randy.dunlap@oracle.com> Signed-off-by: Matthew Garrett <mjg@redhat.com>
2011-01-07ideapad: add hotkey supportIke Panhc
Hotkey enabled by this patch: Fn+F3: Video mode switch Fn+F5: software rfkill for wifi For some ideapad when push Fn+F3, hardware generates Super-P keys, those key will not be enabled by this patch. Thanks for Dave Hansen report the problem. If CONFIG_INPUT_SPARSEKMAP is not set, when building, you will have error message: ERROR: "sparse_keymap_setup" [drivers/platform/x86/ideapad-laptop.ko] undefined! ERROR: "sparse_keymap_free" [drivers/platform/x86/ideapad-laptop.ko] undefined! ERROR: "sparse_keymap_report_event" [drivers/platform/x86/ideapad-laptop.ko] undefined! To select INPUT_SPARSEKMAP solve this issue. Ref: http://lkml.org/lkml/2010/12/2/340 Signed-off-by: Ike Panhc <ike.pan@canonical.com> Signed-off-by: Matthew Garrett <mjg@redhat.com>
2011-01-07eeepc-wmi: add rfkill support for wlan, bluetooth and 3gCorentin Chary
wimax support is missing because I don't have any DSDT with WMI and wimax support. Most of the code comes from eeepc-laptop. Signed-off-by: Corentin Chary <corentincj@iksaif.net> Signed-off-by: Matthew Garrett <mjg@redhat.com>
2011-01-07eeepc-wmi: add touchpad led supportCorentin Chary
Most of the code comes from eeepc-laptop. Signed-off-by: Corentin Chary <corentincj@iksaif.net> Signed-off-by: Matthew Garrett <mjg@redhat.com>
2011-01-07intel_scu_ipc: Utility driver for intel scu ipcSreedhara DS
This driver implements ioctl and interfaces with intel scu ipc driver. It is used to access pmic/msic registers from user space and firmware update utility. Signed-off-by: Sreedhara DS <sreedhara.ds@intel.com> [Extensive clean up and debug] Signed-off-by: Alan Cox <alan@linux.intel.com> Signed-off-by: Matthew Garrett <mjg@redhat.com>
2010-10-21IBM Real-Time "SMI Free" mode driver -v7Vernon Mauery
After a period of RFC for this driver, I think it is ready for inclusion in the platform-driver-x86 tree, hopefully to be staged in the next merge window into Linus's tree. --Vernon ------------------------------------------------------------ IBM Real-Time "SMI Free" mode driver This driver supports the Real-Time Linux (RTL) BIOS feature. The RTL feature allows non-fatal System Management Interrupts (SMIs) to be disabled on supported IBM platforms and is intended to be coupled with a user-space daemon to monitor the hardware in a way that can be prioritized and scheduled to better suit the requirements for the system. The Device is presented as a special "_RTL_" table to the OS in the Extended BIOS Data Area. There is a simple protocol for entering and exiting the mode at runtime. This driver creates a simple sysfs interface to allow a simple entry and exit from RTL mode in the UFI/BIOS. Since the driver is specific to IBM SystemX hardware (x86- based servers) it only builds on x86 builds. To reduce the risk of loading on the wrong hardware, the module uses DMI information and checks a list of servers that are known to work. Signed-off-by: Vernon Mauery <vernux@us.ibm.com> Signed-off-by: Matthew Garrett <mjg@redhat.com>
2010-10-21Add OLPC XO-1 rfkill driverDaniel Drake
Add a software rfkill switch for the WLAN interface in the OLPC XO-1 laptop. It uses the OLPC embedded controller to cut/restore power to the Marvell WLAN chip on the motherboard. Signed-off-by: Daniel Drake <dsd@laptop.org> Signed-off-by: Matthew Garrett <mjg@redhat.com>
2010-10-21Move hdaps driver to platform/x86Jean Delvare
The hdaps driver isn't a hardware monitoring driver, so it shouldn't live under driver/hwmon. drivers/platform/x86 seems much more appropriate, as the driver is only useful on x86 laptops. Signed-off-by: Jean Delvare <khali@linux-fr.org> Cc: Guenter Roeck <guenter.roeck@ericsson.com> Cc: Matthew Garrett <mjg@redhat.com> Cc: Frank Seidel <frank@f-seidel.de> Signed-off-by: Matthew Garrett <mjg@redhat.com>
2010-10-21ideapad: Change the driver name to ideapad-laptopIke Panhc
Since the platform drivers doing more for laptops than just using specific ACPI device. It will be good to change the name from *_acpi to *-laptop. Reference: http://lkml.org/lkml/2010/8/14/154 Signed-off-by: Ike Panhc <ike.pan@canonical.com> Acked-by: Len Brown <len.brown@intel.com> Signed-off-by: Matthew Garrett <mjg@redhat.com>
2010-10-21acpi_toshiba: fix kconfig errorRandy Dunlap
Fix kconfig recursive dependency error in ACPI_TOSHIBA: it uses both select and depends on for BACKLIGHT_CLASS_DEVICE. drivers/video/backlight/Kconfig:117:error: recursive dependency detected! drivers/video/backlight/Kconfig:117: symbol BACKLIGHT_CLASS_DEVICE is selected by ACPI_TOSHIBA drivers/platform/x86/Kconfig:490: symbol ACPI_TOSHIBA depends on LEDS_CLASS drivers/leds/Kconfig:12: symbol LEDS_CLASS is selected by BACKLIGHT_ADP8860 drivers/video/backlight/Kconfig:285: symbol BACKLIGHT_ADP8860 depends on BACKLIGHT_CLASS_DEVICE Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com> Signed-off-by: Matthew Garrett <mjg@redhat.com>
2010-10-21toshiba-acpi - switch to using sparse keymapDmitry Torokhov
Instead of implementing its own version of keymap hanlding switch over to using sparse keymap library. Also, install notify handler only after we allocated input device, otherwise we may risk getting event too early and crash. Similarly, notify handler should be removed before we unregister input device. Signed-off-by: Dmitry Torokhov <dtor@mail.ru> Signed-off-by: Matthew Garrett <mjg@redhat.com>
2010-10-21Input: hp-wmi - switch to using sparse keymap libraryDmitry Torokhov
Instead of implementing its own version of keymap hanlding switch over to using sparse keymap library. Also make sure that we install notify handler only after we allocated input device and that we remove notify handler before unregistering input device. Signed-off-by: Dmitry Torokhov <dtor@mail.ru> Signed-off-by: Matthew Garrett <mjg@redhat.com>
2010-10-21Input: dell-wmi - switch to using sparse keymap libraryDmitry Torokhov
Instead of implementing its own version of keymap hanlding switch over to using sparse keymap library. Signed-off-by: Dmitry Torokhov <dtor@mail.ru> Signed-off-by: Matthew Garrett <mjg@redhat.com>
2010-10-21panasonic-laptop - switch to using sparse keymap libraryDmitry Torokhov
nstead of implementing its own version of keymap hanlding switch over to using sparse keymap library. Cc: Harald Welte <laforge@gnumonks.org> Signed-off-by: Dmitry Torokhov <dtor@mail.ru> Signed-off-by: Matthew Garrett <mjg@redhat.com>
2010-10-21topstar-laptop - switch to using sparse keymap libraryDmitry Torokhov
Instead of implementing its own version of keymap hanlding switch over to using sparse keymap library. Acked-by: Herton Ronaldo Krzesinski <herton@mandriva.com.br> Signed-off-by: Dmitry Torokhov <dtor@mail.ru> Signed-off-by: Matthew Garrett <mjg@redhat.com>
2010-08-23ACPI_TOSHIBA needs LEDS supportJonathan Corbet
Don't ask how ACPI_TOSHIBA got enabled on in desktop system's .config - I don't know. But it has silently been there until I tried 2.6.36-rc2, where it broke the build because I don't have LED support turned on. Attached patch fixes things up. (I had to change BACKLIGHT_CLASS_DEVICE to "depends" because otherwise I get unsightly core dumps out of scripts/kconfig/conf). jon -- toshiba: make sure we pull in LED support The Toshiba extras driver uses the LED module, so make sure we have it configure in. Signed-off-by: Jonathan Corbet <corbet@lwn.net> Signed-off-by: Matthew Garrett <mjg@redhat.com>
2010-08-11Add Lenovo ideapad driverDavid Woodhouse
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2010-08-03x86 plat: limit x86 platform driver menu to X86Jan Engelhardt
My .config contains ACER_WMI=m. On SPARC. That does not make sense. Restrict the x86 platform driver menu to x86. Signed-off-by: Jan Engelhardt <jengelh@medozas.de> Signed-off-by: Matthew Garrett <mjg@redhat.com>
2010-08-03compal-laptop: depends on POWER_SUPPLYRandy Dunlap
compal-laptop uses power_supply interfaces so it should depend on POWER_SUPPLY. ERROR: "power_supply_register" [drivers/platform/x86/compal-laptop.ko] undefined! ERROR: "power_supply_unregister" [drivers/platform/x86/compal-laptop.ko] undefined! Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com> Cc: Cezary Jackiewicz <cezary.jackiewicz@gmail.com> Cc: Matthew Garrett <mjg@redhat.com> Cc: platform-driver-x86@vger.kernel.org Signed-off-by: Matthew Garrett <mjg@redhat.com>
2010-08-03gpio: Add PMIC GPIO block supportAlek Du
Moorestown has PMIC chip which contains GPIO blocks. The PMIC chip is connected to Langwell by SPI interface. So this GPIO driver will be regarded as SPI GPIO expander though the actual GPIO access is through IPC and SRAM. The SPI master contoller will probe this device driver by parsing SPIB table. Cleaned up for new IPC, GPE removed and some printk and other tidying by Alan Cox. Fixes for points noted by Matthew Garrett Signed-off-by: Alek Du <alek.du@intel.com> Signed-off-by: Alan Cox <alan@linux.intel.com> Signed-off-by: Matthew Garrett <mjg@redhat.com>
2010-08-03compal-laptop: uses hwmon interfaces, depends on HWMONRandy Dunlap
compal-laptop uses hwmon interfaces, so it should depend on HWMON. compal-laptop.c:(.devinit.text+0x4071f): undefined reference to `hwmon_device_register' compal-laptop.c:(.devexit.text+0x6ec0): undefined reference to `hwmon_device_unregister' Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com> Cc: Roald Frederickx <roald.frederickx@gmail.com> Cc: Matthew Garrett <mjg59@srcf.ucam.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Matthew Garrett <mjg@redhat.com>
2010-08-03rar: Move the RAR driver into the right place as its now cleanAlan Cox
We exit staging rar! rar! rar!... Signed-off-by: Alan Cox <alan@linux.intel.com> Signed-off-by: Matthew Garrett <mjg@redhat.com> Acked-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-08-03x86 platform driver: intelligent power sharing driverJesse Barnes
Intel Core i3/5 platforms with integrated graphics support both CPU and GPU turbo mode. CPU turbo mode is opportunistic: the CPU will use any available power to increase core frequencies if thermal headroom is available. The GPU side is more manual however; the graphics driver must monitor GPU power and temperature and coordinate with a core thermal driver to take advantage of available thermal and power headroom in the package. The intelligent power sharing (IPS) driver is intended to coordinate this activity by monitoring MCP (multi-chip package) temperature and power, allowing the CPU and/or GPU to increase their power consumption, and thus performance, when possible. The goal is to maximize performance within a given platform's TDP (thermal design point). Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org> Signed-off-by: Matthew Garrett <mjg@redhat.com>
2010-08-03platform/x86: msi-laptop depends on SERIO_I8042Randy Dunlap
msi-laptop uses i8042_*() interfaces, so it should depend on SERIO_I8042. E.g., when SERIO_I8042=m and MSI_LAPTOP=y: msi-laptop.c:(.text+0x18a7fe): undefined reference to `i8042_install_filter' msi-laptop.c:(.init.text+0xd69d): undefined reference to `i8042_remove_filter' msi-laptop.c:(.exit.text+0x19c3): undefined reference to `i8042_remove_filter' Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com> Signed-off-by: Matthew Garrett <mjg@redhat.com> Cc: Lennart Poettering <mzxreary@0pointer.de>
2010-08-03classmate-laptop: depends on RFKILL or RFKILL=nThadeu Lima de Souza Cascardo
Randy Dunlap has reported that building classmate-laptop fails when CONFIG_RFKILL=m and CONFIG_ACPI_CMPC=y. He suggested depending on RFKILL, but, then, it will not be possible to select classmate-laptop when RFKILL is off. There's no known problem with building and using classmate-laptop with RFKILL off. So depend on RFKILL or RFKILL=n. Signed-off-by: Thadeu Lima de Souza Cascardo <cascardo@holoscopio.com> Signed-off-by: Matthew Garrett <mjg@redhat.com> Reported-by: Randy Dunlap <randy.dunlap@oracle.com> Cc: Randy Dunlap <randy.dunlap@oracle.com> Cc: platform-driver-x86@vger.kernel.org Cc: Daniel Oliveira Nascimento <don@syst.com.br>
2010-05-17drivers/platform/x86: Clarify the MRST IPC driver description slightlyMatthew Garrett
Make it clear that this driver is only needed for embedded hardware, not PCs. Signed-off-by: Matthew Garrett <mjg@redhat.com>
2010-05-17eeepc-wmi: depends on BACKLIGHT_CLASS_DEVICERandy Dunlap
eeepc-wmi uses backlight*() interfaces so it should depend on BACKLIGHT_CLASS_DEVICE. eeepc-wmi.c:(.text+0x2d7f54): undefined reference to `backlight_force_update' eeepc-wmi.c:(.text+0x2d8012): undefined reference to `backlight_device_register' eeepc-wmi.c:(.devinit.text+0x1c31c): undefined reference to `backlight_device_unregister' eeepc-wmi.c:(.devexit.text+0x2f8b): undefined reference to `backlight_device_unregister' Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com> Cc: stable@kernel.org
2010-05-17IPC driver for Intel Mobile Internet Device (MID) platformsSreedhara DS
The IPC (inter processor communications) is used to provide the communications between kernel and system control units on some embedded Intel x86 platforms. (Various bits of clean up and restructuring by Alan Cox) Signed-off-by: Sreedhara DS <sreedhara.ds@intel.com> Signed-off-by: Alan Cox <alan@linux.intel.com>
2010-04-12eeepc-wmi: Build fixIngo Molnar
-tip testing found: eeepc-wmi.c:(.text+0x36673c): undefined reference to `sparse_keymap_report_event' drivers/built-in.o: In function `eeepc_wmi_init': eeepc-wmi.c:(.init.text+0x19cd0): undefined reference to `sparse_keymap_setup' eeepc-wmi.c:(.init.text+0x19cf0): undefined reference to `sparse_keymap_free' eeepc-wmi.c:(.init.text+0x19d0b): undefined reference to `sparse_keymap_free' drivers/built-in.o: In function `eeepc_wmi_exit': eeepc-wmi.c:(.exit.text+0x2e87): undefined reference to `sparse_keymap_free' To fix this select INPUT_SPARSEKMAP, like the ASUS driver does. Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Matthew Garrett <mjg@redhat.com>
generated by cgit v1.2.3 (git 2.39.1) at 2024-08-12 12:16:00 +0000