summaryrefslogtreecommitdiff
path: root/drivers/platform
AgeCommit message (Collapse)Author
2010-10-27Remove duplicate includes from many filesZimny Lech
Signed-off-by: Zimny Lech <napohybelskurwysynom2010@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-10-25Merge branch 'for_linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/mjg59/platform-drivers-x86 * 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mjg59/platform-drivers-x86: (44 commits) eeepc-wmi: Add cpufv sysfs interface eeepc-wmi: add additional hotkeys panasonic-laptop: Simplify calls to acpi_pcc_retrieve_biosdata panasonic-laptop: Handle errors properly if they happen intel_pmic_gpio: fix off-by-one value range checking IBM Real-Time "SMI Free" mode driver -v7 Add OLPC XO-1 rfkill driver Move hdaps driver to platform/x86 ideapad-laptop: Fix Makefile intel_pmic_gpio: swap the bits and mask args for intel_scu_ipc_update_register ideapad: Add param: no_bt_rfkill ideapad: Change the driver name to ideapad-laptop ideapad: rewrite the sw rfkill set ideapad: rewrite the hw rfkill notify ideapad: use EC command to control camera ideapad: use return value of _CFG to tell if device exist or not ideapad: make sure we bind on the correct device ideapad: check VPC bit before sync rfkill hw status ideapad: add ACPI helpers dell-laptop: Add debugfs support ...
2010-10-22Merge branch 'llseek' of git://git.kernel.org/pub/scm/linux/kernel/git/arnd/bklLinus Torvalds
* 'llseek' of git://git.kernel.org/pub/scm/linux/kernel/git/arnd/bkl: vfs: make no_llseek the default vfs: don't use BKL in default_llseek llseek: automatically add .llseek fop libfs: use generic_file_llseek for simple_attr mac80211: disallow seeks in minstrel debug code lirc: make chardev nonseekable viotape: use noop_llseek raw: use explicit llseek file operations ibmasmfs: use generic_file_llseek spufs: use llseek in all file operations arm/omap: use generic_file_llseek in iommu_debug lkdtm: use generic_file_llseek in debugfs net/wireless: use generic_file_llseek in debugfs drm: use noop_llseek
2010-10-21eeepc-wmi: Add cpufv sysfs interfaceChris Bagwell
eeepc-laptop provides a sysfs interface to read and control what it calls cpufv. When WMI is enabled, the ACPI interface changes slightly and becames a write-only control with 3 valid values. Expose cpufv again to allow for user space utils that can extended battery life noticably and come a little closer to parity with eeepc-laptop. Write-only is OK for most user space apps because read status was mostly used to prevent unneeded mode changes. Since this same check to ignore changes to same mode also exists in the DSDT then it was wasted ACPI call. acpi_osi="!Windows 2009" can be used for get back eeepc-laptop's read support of cpufv for debugging things such as behaviour during resume. This patch was tested with EEE PC 1005PE by monitoring powertop output while writing values of "0", "1", and "2" and by reviewing the decompiled DSDT of an 1201NL and comparing it to 1005PE's DSDT. Signed-off-by: Chris Bagwell <chris@cnpbagwell.com> Signed-off-by: Matthew Garrett <mjg@redhat.com>
2010-10-21eeepc-wmi: add additional hotkeysChris Bagwell
Added 4 hotkeys using same keymap values as eeepc-latop. These are mousepad toggle, resolution change, screen off, and task manager. These were tested on 1005PE and are the Fn-F3, F4, F7, and F9, respectively. Also, added a new hot key for power toggles (Fn-Space on 1005PE) and is meant to drive cpufv interface from userspace. Signed-off-by: Chris Bagwell <chris@cnpbagwell.com> Signed-off-by: Matthew Garrett <mjg@redhat.com>
2010-10-21panasonic-laptop: Simplify calls to acpi_pcc_retrieve_biosdataJean Delvare
Function acpi_pcc_retrieve_biosdata is always called with parameters (pcc, pcc->sinf), so we can drop the second parameter. It was dangerous to pass the sinf array separately anyway, as its length is checked as pcc->num_sifr, which pretty much assumed it was pcc->sinf (or at least had the same size.) This change makes the code slightly more compact and thus marginally faster. Signed-off-by: Jean Delvare <jdelvare@suse.de> Cc: Harald Welte <laforge@gnumonks.org> Signed-off-by: Matthew Garrett <mjg@redhat.com>
2010-10-21panasonic-laptop: Handle errors properly if they happenJean Delvare
acpi_pcc_retrieve_biosdata() returns success instead of error if HKEY.SINF is invalid. Fix this. Furthermore, if acpi_pcc_retrieve_biosdata() returns an error during device addition, initialization is properly reverted but value 0 is returned, which means success. This would cause a crash when later using or removing the device, so fix this too. Signed-off-by: Jean Delvare <jdelvare@suse.de> Cc: Harald Welte <laforge@gnumonks.org> Cc: Bruno Premont <bonbons@linux-vserver.org> Signed-off-by: Matthew Garrett <mjg@redhat.com>
2010-10-21intel_pmic_gpio: fix off-by-one value range checkingAxel Lin
In pmic_irq_type(), we use gpio as array index for trigger, thus the valid value range for gpio should be 0 .. NUM_GPIO - 1. Signed-off-by: Axel Lin <axel.lin@gmail.com> Signed-off-by: Matthew Garrett <mjg@redhat.com>
2010-10-21IBM Real-Time "SMI Free" mode driver -v7Vernon Mauery
After a period of RFC for this driver, I think it is ready for inclusion in the platform-driver-x86 tree, hopefully to be staged in the next merge window into Linus's tree. --Vernon ------------------------------------------------------------ IBM Real-Time "SMI Free" mode driver This driver supports the Real-Time Linux (RTL) BIOS feature. The RTL feature allows non-fatal System Management Interrupts (SMIs) to be disabled on supported IBM platforms and is intended to be coupled with a user-space daemon to monitor the hardware in a way that can be prioritized and scheduled to better suit the requirements for the system. The Device is presented as a special "_RTL_" table to the OS in the Extended BIOS Data Area. There is a simple protocol for entering and exiting the mode at runtime. This driver creates a simple sysfs interface to allow a simple entry and exit from RTL mode in the UFI/BIOS. Since the driver is specific to IBM SystemX hardware (x86- based servers) it only builds on x86 builds. To reduce the risk of loading on the wrong hardware, the module uses DMI information and checks a list of servers that are known to work. Signed-off-by: Vernon Mauery <vernux@us.ibm.com> Signed-off-by: Matthew Garrett <mjg@redhat.com>
2010-10-21Add OLPC XO-1 rfkill driverDaniel Drake
Add a software rfkill switch for the WLAN interface in the OLPC XO-1 laptop. It uses the OLPC embedded controller to cut/restore power to the Marvell WLAN chip on the motherboard. Signed-off-by: Daniel Drake <dsd@laptop.org> Signed-off-by: Matthew Garrett <mjg@redhat.com>
2010-10-21Move hdaps driver to platform/x86Jean Delvare
The hdaps driver isn't a hardware monitoring driver, so it shouldn't live under driver/hwmon. drivers/platform/x86 seems much more appropriate, as the driver is only useful on x86 laptops. Signed-off-by: Jean Delvare <khali@linux-fr.org> Cc: Guenter Roeck <guenter.roeck@ericsson.com> Cc: Matthew Garrett <mjg@redhat.com> Cc: Frank Seidel <frank@f-seidel.de> Signed-off-by: Matthew Garrett <mjg@redhat.com>
2010-10-21ideapad-laptop: Fix MakefileMatthew Garrett
The makefile didn't get updated when the driver changed name, which broke the build. Signed-off-by: Matthew Garrett <mjg@redhat.com>
2010-10-21intel_pmic_gpio: swap the bits and mask args for intel_scu_ipc_update_registerAlek Du
The intel_scu_ipc_update_register 2nd paramter should the bits and 3rd paramter should be the mask. This typo was introduced during IPC function changing... Reported-by: Ryan Zhou <ryan.zhou@intel.com> Signed-off-by: Alek Du <alek.du@intel.com> Signed-off-by: Alan Cox <alan@linux.intel.com> Signed-off-by: Matthew Garrett <mjg@redhat.com>
2010-10-21ideapad: Add param: no_bt_rfkillIke Panhc
Add new module parameter that force module not to register bluetooth rfkill. There is report that saying using this bluetooth rfkill to enable/disable bluetooth will let bluetooth device initial failed when enable on Lenovo ideapad S12. Fortunately there is another rfkill registered by bluetooth driver for S12 and user can shutdown the bluetooth by either bluetooth driver or HW RF switch. For dual OS user, it may have some trouble that using Linux after turning off bluetooth with another OS if we do not register bluetooth rfkill at all. So we will force bluetooth enable when no_bt_rfkill=1. Signed-off-by: Ike Panhc <ike.pan@canonical.com> Tested-by: Mario 'BitKoenig' Holbe <Mario.Holbe@TU-Ilmenau.DE> Signed-off-by: Matthew Garrett <mjg@redhat.com>
2010-10-21ideapad: Change the driver name to ideapad-laptopIke Panhc
Since the platform drivers doing more for laptops than just using specific ACPI device. It will be good to change the name from *_acpi to *-laptop. Reference: http://lkml.org/lkml/2010/8/14/154 Signed-off-by: Ike Panhc <ike.pan@canonical.com> Acked-by: Len Brown <len.brown@intel.com> Signed-off-by: Matthew Garrett <mjg@redhat.com>
2010-10-21ideapad: rewrite the sw rfkill setIke Panhc
Control power of rf modules by ec commands Signed-off-by: Ike Panhc <ike.pan@canonical.com> Signed-off-by: Matthew Garrett <mjg@redhat.com>
2010-10-21ideapad: rewrite the hw rfkill notifyIke Panhc
1. Read hw rfkill status by ec command 2. Not to touch sw status of each rfkill when hw rfkill notify 3. Initial rfkill status when module loaded Signed-off-by: Ike Panhc <ike.pan@canonical.com> Signed-off-by: Matthew Garrett <mjg@redhat.com>
2010-10-21ideapad: use EC command to control cameraIke Panhc
Signed-off-by: Ike Panhc <ike.pan@canonical.com> Signed-off-by: Matthew Garrett <mjg@redhat.com>
2010-10-21ideapad: use return value of _CFG to tell if device exist or notIke Panhc
There are several bits of the return value of _CFG shows if RF/Camera devices exist or not. Signed-off-by: Ike Panhc <ike.pan@canonical.com> Signed-off-by: Matthew Garrett <mjg@redhat.com>
2010-10-21ideapad: make sure we bind on the correct deviceIke Panhc
By reading from method _CFG to make sure we bind on the correct VPC2004 device. Signed-off-by: Ike Panhc <ike.pan@canonical.com> Signed-off-by: Matthew Garrett <mjg@redhat.com>
2010-10-21ideapad: check VPC bit before sync rfkill hw statusIke Panhc
Check VPC bit to make sure the HW rfkill is touched. Signed-off-by: Ike Panhc <ike.pan@canonical.com> Signed-off-by: Matthew Garrett <mjg@redhat.com>
2010-10-21ideapad: add ACPI helpersIke Panhc
There are two methods under VPC2004 which is used to access VDAT/VCMD of EC register. Add helpers for read and write these two registers. And add read_method_int for reading the return value from ACPI methods which requires no parameter. Signed-off-by: Ike Panhc <ike.pan@canonical.com> Signed-off-by: Matthew Garrett <mjg@redhat.com>
2010-10-21dell-laptop: Add debugfs supportKeng-Yu Lin
Export the status of RF killswitch through debugfs. The killswitch status is obtained by the SMI to BIOS. Exporting this status through debugfs can help identify the issue with the misbehaving firmware. Signed-off-by: Keng-Yu Lin <keng-yu.lin@canonical.com> Signed-off-by: Matthew Garrett <mjg@redhat.com>
2010-10-21WMI: embed struct device directly into wmi_blockDmitry Torokhov
Instead of creating wmi_blocks and then register corresponding devices on a separate pass do it all in one shot, since lifetime rules for both objects are the same. This also takes care of leaking devices when device_create fails for one of them. Signed-off-by: Dmitry Torokhov <dtor@mail.ru> Signed-off-by: Matthew Garrett <mjg@redhat.com>
2010-10-21WMI: make use of class device's attributresDmitry Torokhov
Instead of adding modalias attribute manually set it up as class's device attribute so driver core will create and remove it for us. Signed-off-by: Dmitry Torokhov <dtor@mail.ru> Signed-off-by: Matthew Garrett <mjg@redhat.com>
2010-10-21WMI: use pr_err() and friendsDmitry Torokhov
This makes source more concise and easier to read. Signed-off-by: Dmitry Torokhov <dtor@mail.ru> Signed-off-by: Matthew Garrett <mjg@redhat.com>
2010-10-21WMI: use separate list head for storing wmi blocksDmitry Torokhov
Do not abuse wmi_block structure to hold the head of list of blocks, use separate list_head for that. Signed-off-by: Dmitry Torokhov <dtor@mail.ru> Signed-off-by: Matthew Garrett <mjg@redhat.com>
2010-10-21WMI: simplify handling of returned WMI blocks in parse_wdg()Dmitry Torokhov
There is no reason why we allocate memory and copy data into an intermediate buffer, it is not like we are working with data coming from userspace. Signed-off-by: Dmitry Torokhov <dtor@mail.ru> Signed-off-by: Matthew Garrett <mjg@redhat.com>
2010-10-21WMI: fix potential NULL pointer dereferenceDmitry Torokhov
Signed-off-by: Dmitry Torokhov <dtor@mail.ru> Signed-off-by: Matthew Garrett <mjg@redhat.com>
2010-10-21WMI: do not leak memory in parse_wdg()Dmitry Torokhov
If we _WDG returned object that is not buffer we were forgetting to free memory allocated for that object. Signed-off-by: Dmitry Torokhov <dtor@mail.ru> Signed-off-by: Matthew Garrett <mjg@redhat.com>
2010-10-21WMI: fix wmi_gtoa() to actully terminate the stringDmitry Torokhov
Courtesy of sparse... Signed-off-by: Dmitry Torokhov <dtor@mail.ru> Signed-off-by: Matthew Garrett <mjg@redhat.com>
2010-10-21WMI: free wmi blocks when parse_wdg() failsDmitry Torokhov
Signed-off-by: Dmitry Torokhov <dtor@mail.ru> Signed-off-by: Matthew Garrett <mjg@redhat.com>
2010-10-21WMI: remove EC region handler when _WDG parsing failsDmitry Torokhov
Driver initialization was forgetting to remove EC address space handler in cases when parse_wdg() method failed. Signed-off-by: Dmitry Torokhov <dtor@mail.ru> Signed-off-by: Matthew Garrett <mjg@redhat.com>
2010-10-21asus-laptop: use attribute group to manage attributesDmitry Torokhov
Instead of registering (and removing) every attribute individually switch to using sysfs attribute group. This makes sure that we properly unwind and do not try to remove non-existent attributes which may not be safe to do in the future. Signed-off-by: Dmitry Torokhov <dtor@mail.ru> Signed-off-by: Matthew Garrett <mjg@redhat.com>
2010-10-21scu_ipc: Fix warning caused by include changesAlan Cox
We need to include the SFI headers. This is fine as the SCU is only relevant to x86 platforms with SFI. Fixes the -next warning report. Signed-off-by: Alan Cox <alan@linux.intel.com> Signed-off-by: Matthew Garrett <mjg@redhat.com>
2010-10-21platform: x86: throw away custom methodsAndy Shevchenko
In 2.6.35 the hex_to_bin() was introduced. Signed-off-by: Andy Shevchenko <andy.shevchenko@gmail.com> Cc: Carlos Corbacho <carlos@strangeworlds.co.uk> Cc: Matthew Garrett <mjg@redhat.com> Cc: platform-driver-x86@vger.kernel.org Signed-off-by: Matthew Garrett <mjg@redhat.com>
2010-10-21acpi_toshiba: fix kconfig errorRandy Dunlap
Fix kconfig recursive dependency error in ACPI_TOSHIBA: it uses both select and depends on for BACKLIGHT_CLASS_DEVICE. drivers/video/backlight/Kconfig:117:error: recursive dependency detected! drivers/video/backlight/Kconfig:117: symbol BACKLIGHT_CLASS_DEVICE is selected by ACPI_TOSHIBA drivers/platform/x86/Kconfig:490: symbol ACPI_TOSHIBA depends on LEDS_CLASS drivers/leds/Kconfig:12: symbol LEDS_CLASS is selected by BACKLIGHT_ADP8860 drivers/video/backlight/Kconfig:285: symbol BACKLIGHT_ADP8860 depends on BACKLIGHT_CLASS_DEVICE Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com> Signed-off-by: Matthew Garrett <mjg@redhat.com>
2010-10-21Don't show error if Acer WMI is not foundPascal de Bruijn
Signed-off-by: Matthew Garrett <mjg@redhat.com>
2010-10-21asus-laptop: remove no longer used keycode_map fieldDmitry Torokhov
The driver uses sparse keymap library and does not use this field anymore. Signed-off-by: Dmitry Torokhov <dtor@mail.ru> Signed-off-by: Matthew Garrett <mjg@redhat.com>
2010-10-21asus-laptop: fix gps rfkillCorentin Chary
The GPS rfkill crappy code. The ops_data argument wasn't set, and was totally misused. The fix have been tested on an Asus R2H. Cc: stable@kernel.org Signed-off-by: Corentin Chary <corentincj@iksaif.net> Signed-off-by: Matthew Garrett <mjg@redhat.com>
2010-10-21asus-laptop: Add key found on Asus N61JQCorentin Chary
Signed-off-by: Corentin Chary <corentincj@iksaif.net> Signed-off-by: Matthew Garrett <mjg@redhat.com>
2010-10-21platform-x86: sync eeepc-laptop and asus-laptopCorentin Chary
Makes asus-laptop and eeepc-laptop _init/_exit functions looks exactly the same as they do the same thing. Signed-off-by: Corentin Chary <corentincj@iksaif.net> Signed-off-by: Matthew Garrett <mjg@redhat.com>
2010-10-21toshiba-acpi - switch to using sparse keymapDmitry Torokhov
Instead of implementing its own version of keymap hanlding switch over to using sparse keymap library. Also, install notify handler only after we allocated input device, otherwise we may risk getting event too early and crash. Similarly, notify handler should be removed before we unregister input device. Signed-off-by: Dmitry Torokhov <dtor@mail.ru> Signed-off-by: Matthew Garrett <mjg@redhat.com>
2010-10-21Input: hp-wmi - switch to using sparse keymap libraryDmitry Torokhov
Instead of implementing its own version of keymap hanlding switch over to using sparse keymap library. Also make sure that we install notify handler only after we allocated input device and that we remove notify handler before unregistering input device. Signed-off-by: Dmitry Torokhov <dtor@mail.ru> Signed-off-by: Matthew Garrett <mjg@redhat.com>
2010-10-21Input: dell-wmi - switch to using sparse keymap libraryDmitry Torokhov
Instead of implementing its own version of keymap hanlding switch over to using sparse keymap library. Signed-off-by: Dmitry Torokhov <dtor@mail.ru> Signed-off-by: Matthew Garrett <mjg@redhat.com>
2010-10-21panasonic-laptop - switch to using sparse keymap libraryDmitry Torokhov
nstead of implementing its own version of keymap hanlding switch over to using sparse keymap library. Cc: Harald Welte <laforge@gnumonks.org> Signed-off-by: Dmitry Torokhov <dtor@mail.ru> Signed-off-by: Matthew Garrett <mjg@redhat.com>
2010-10-21topstar-laptop - switch to using sparse keymap libraryDmitry Torokhov
Instead of implementing its own version of keymap hanlding switch over to using sparse keymap library. Acked-by: Herton Ronaldo Krzesinski <herton@mandriva.com.br> Signed-off-by: Dmitry Torokhov <dtor@mail.ru> Signed-off-by: Matthew Garrett <mjg@redhat.com>
2010-10-15llseek: automatically add .llseek fopArnd Bergmann
All file_operations should get a .llseek operation so we can make nonseekable_open the default for future file operations without a .llseek pointer. The three cases that we can automatically detect are no_llseek, seq_lseek and default_llseek. For cases where we can we can automatically prove that the file offset is always ignored, we use noop_llseek, which maintains the current behavior of not returning an error from a seek. New drivers should normally not use noop_llseek but instead use no_llseek and call nonseekable_open at open time. Existing drivers can be converted to do the same when the maintainer knows for certain that no user code relies on calling seek on the device file. The generated code is often incorrectly indented and right now contains comments that clarify for each added line why a specific variant was chosen. In the version that gets submitted upstream, the comments will be gone and I will manually fix the indentation, because there does not seem to be a way to do that using coccinelle. Some amount of new code is currently sitting in linux-next that should get the same modifications, which I will do at the end of the merge window. Many thanks to Julia Lawall for helping me learn to write a semantic patch that does all this. ===== begin semantic patch ===== // This adds an llseek= method to all file operations, // as a preparation for making no_llseek the default. // // The rules are // - use no_llseek explicitly if we do nonseekable_open // - use seq_lseek for sequential files // - use default_llseek if we know we access f_pos // - use noop_llseek if we know we don't access f_pos, // but we still want to allow users to call lseek // @ open1 exists @ identifier nested_open; @@ nested_open(...) { <+... nonseekable_open(...) ...+> } @ open exists@ identifier open_f; identifier i, f; identifier open1.nested_open; @@ int open_f(struct inode *i, struct file *f) { <+... ( nonseekable_open(...) | nested_open(...) ) ...+> } @ read disable optional_qualifier exists @ identifier read_f; identifier f, p, s, off; type ssize_t, size_t, loff_t; expression E; identifier func; @@ ssize_t read_f(struct file *f, char *p, size_t s, loff_t *off) { <+... ( *off = E | *off += E | func(..., off, ...) | E = *off ) ...+> } @ read_no_fpos disable optional_qualifier exists @ identifier read_f; identifier f, p, s, off; type ssize_t, size_t, loff_t; @@ ssize_t read_f(struct file *f, char *p, size_t s, loff_t *off) { ... when != off } @ write @ identifier write_f; identifier f, p, s, off; type ssize_t, size_t, loff_t; expression E; identifier func; @@ ssize_t write_f(struct file *f, const char *p, size_t s, loff_t *off) { <+... ( *off = E | *off += E | func(..., off, ...) | E = *off ) ...+> } @ write_no_fpos @ identifier write_f; identifier f, p, s, off; type ssize_t, size_t, loff_t; @@ ssize_t write_f(struct file *f, const char *p, size_t s, loff_t *off) { ... when != off } @ fops0 @ identifier fops; @@ struct file_operations fops = { ... }; @ has_llseek depends on fops0 @ identifier fops0.fops; identifier llseek_f; @@ struct file_operations fops = { ... .llseek = llseek_f, ... }; @ has_read depends on fops0 @ identifier fops0.fops; identifier read_f; @@ struct file_operations fops = { ... .read = read_f, ... }; @ has_write depends on fops0 @ identifier fops0.fops; identifier write_f; @@ struct file_operations fops = { ... .write = write_f, ... }; @ has_open depends on fops0 @ identifier fops0.fops; identifier open_f; @@ struct file_operations fops = { ... .open = open_f, ... }; // use no_llseek if we call nonseekable_open //////////////////////////////////////////// @ nonseekable1 depends on !has_llseek && has_open @ identifier fops0.fops; identifier nso ~= "nonseekable_open"; @@ struct file_operations fops = { ... .open = nso, ... +.llseek = no_llseek, /* nonseekable */ }; @ nonseekable2 depends on !has_llseek @ identifier fops0.fops; identifier open.open_f; @@ struct file_operations fops = { ... .open = open_f, ... +.llseek = no_llseek, /* open uses nonseekable */ }; // use seq_lseek for sequential files ///////////////////////////////////// @ seq depends on !has_llseek @ identifier fops0.fops; identifier sr ~= "seq_read"; @@ struct file_operations fops = { ... .read = sr, ... +.llseek = seq_lseek, /* we have seq_read */ }; // use default_llseek if there is a readdir /////////////////////////////////////////// @ fops1 depends on !has_llseek && !nonseekable1 && !nonseekable2 && !seq @ identifier fops0.fops; identifier readdir_e; @@ // any other fop is used that changes pos struct file_operations fops = { ... .readdir = readdir_e, ... +.llseek = default_llseek, /* readdir is present */ }; // use default_llseek if at least one of read/write touches f_pos ///////////////////////////////////////////////////////////////// @ fops2 depends on !fops1 && !has_llseek && !nonseekable1 && !nonseekable2 && !seq @ identifier fops0.fops; identifier read.read_f; @@ // read fops use offset struct file_operations fops = { ... .read = read_f, ... +.llseek = default_llseek, /* read accesses f_pos */ }; @ fops3 depends on !fops1 && !fops2 && !has_llseek && !nonseekable1 && !nonseekable2 && !seq @ identifier fops0.fops; identifier write.write_f; @@ // write fops use offset struct file_operations fops = { ... .write = write_f, ... + .llseek = default_llseek, /* write accesses f_pos */ }; // Use noop_llseek if neither read nor write accesses f_pos /////////////////////////////////////////////////////////// @ fops4 depends on !fops1 && !fops2 && !fops3 && !has_llseek && !nonseekable1 && !nonseekable2 && !seq @ identifier fops0.fops; identifier read_no_fpos.read_f; identifier write_no_fpos.write_f; @@ // write fops use offset struct file_operations fops = { ... .write = write_f, .read = read_f, ... +.llseek = noop_llseek, /* read and write both use no f_pos */ }; @ depends on has_write && !has_read && !fops1 && !fops2 && !has_llseek && !nonseekable1 && !nonseekable2 && !seq @ identifier fops0.fops; identifier write_no_fpos.write_f; @@ struct file_operations fops = { ... .write = write_f, ... +.llseek = noop_llseek, /* write uses no f_pos */ }; @ depends on has_read && !has_write && !fops1 && !fops2 && !has_llseek && !nonseekable1 && !nonseekable2 && !seq @ identifier fops0.fops; identifier read_no_fpos.read_f; @@ struct file_operations fops = { ... .read = read_f, ... +.llseek = noop_llseek, /* read uses no f_pos */ }; @ depends on !has_read && !has_write && !fops1 && !fops2 && !has_llseek && !nonseekable1 && !nonseekable2 && !seq @ identifier fops0.fops; @@ struct file_operations fops = { ... +.llseek = noop_llseek, /* no read or write fn */ }; ===== End semantic patch ===== Signed-off-by: Arnd Bergmann <arnd@arndb.de> Cc: Julia Lawall <julia@diku.dk> Cc: Christoph Hellwig <hch@infradead.org>
2010-10-05IPS driver: Fix limit clamping when reducing CPU powerMatthew Garrett
Values here are in internal units rather than Watts, so we shouldn't perform any conversion. Signed-off-by: Matthew Garrett <mjg@redhat.com>
2010-10-05[PATCH 2/2] IPS driver: disable CPU turboJesse Barnes
The undocumented interface we're using for reading CPU power seems to be overreporting power. Until we figure out how to correct it, disable CPU turbo and power reporting to be safe. This will keep the CPU within default limits and still allow us to increase GPU frequency as needed. Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org> Signed-off-by: Matthew Garrett <mjg@redhat.com>