summaryrefslogtreecommitdiff
path: root/drivers/target
AgeCommit message (Collapse)Author
2011-12-16target: Set additional sense length field in sense dataRoland Dreier
The target code was not setting the additional sense length field in the sense data it returned, which meant that at least the Linux stack ignored the ASC/ASCQ fields. For example, without this patch, on a tcm_loop device: # sg_raw -v /dev/sda 2 0 0 0 0 0 gives cdb to send: 02 00 00 00 00 00 SCSI Status: Check Condition Sense Information: Fixed format, current; Sense key: Illegal Request Raw sense data (in hex): 70 00 05 00 00 00 00 00 while after the patch we correctly get the following (which matches what a regular disk returns): cdb to send: 02 00 00 00 00 00 SCSI Status: Check Condition Sense Information: Fixed format, current; Sense key: Illegal Request Additional sense: Invalid command operation code Raw sense data (in hex): 70 00 05 00 00 00 00 0a 00 00 00 00 20 00 00 00 00 00 Signed-off-by: Roland Dreier <roland@purestorage.com> Cc: stable@kernel.org Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2011-12-14target: Remove legacy device status check from transport_execute_tasksNicholas Bellinger
This patch removes a legacy se_dev_check_online() check from within transport_execute_tasks() that should no longer be necessary as transport_lookup_cmd_lun() is already making this call. Using transport_cmd_check_stop() from transport_execute_tasks() should already be checking per se_cmd context for each descriptor upon active I/O shutdown, so no need to acquire dev->dev_status_lock again while executing se_task submission. Cc: Christoph Hellwig <hch@lst.de> Cc: Roland Dreier <roland@purestorage.com> Cc: Joern Engel <joern@logfs.org> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2011-12-14target: Remove __transport_execute_tasks() for each processing contextNicholas Bellinger
This patch removes the original usage of __transport_execute_tasks() ahead of every transport_get_cmd_from_queue() call in transport_processing_thread(). This helps reduce se_device->execute_task_lock contention between qla2xxx wq with target_submit_cmd() for READs and transport_processing_thread() context servicing WRITEs with full payloads for I/O submission. It also adds a __transport_execute_tasks() to kick the task queue again without a *se_cmd descriptor with existing queue full logic, but this may end up not being necessary. Cc: Christoph Hellwig <hch@lst.de> Cc: Roland Dreier <roland@purestorage.com> Cc: Joern Engel <joern@logfs.org> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2011-12-14target: Remove extra se_device->execute_task_lock access in fast pathNicholas Bellinger
This patch makes __transport_execute_tasks() perform the addition of tasks to dev->execute_task_list via __transport_add_tasks_from_cmd() while holding dev->execute_task_lock during normal I/O fast path submission. It effectively removes the unnecessary re-acquire of dev->execute_task_lock during transport_execute_tasks() -> transport_add_tasks_from_cmd() ahead of calling __transport_execute_tasks() to queue tasks for the passed *se_cmd descriptor. (v2: Re-add goto check_depth usage for multi-task submission for now..) Cc: Christoph Hellwig <hch@lst.de> Cc: Roland Dreier <roland@purestorage.com> Cc: Joern Engel <joern@logfs.org> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2011-12-14target: Drop se_device TCQ queue_depth usage from I/O pathNicholas Bellinger
Historically, pSCSI devices have been the ones that required target-core to enforce a per se_device->depth_left. This patch changes target-core to no longer (by default) enforce a per se_device->depth_left or sleep in transport_tcq_window_closed() when we out of queue slots for all backend export cases. Cc: Christoph Hellwig <hch@lst.de> Cc: Roland Dreier <roland@purestorage.com> Cc: Joern Engel <joern@logfs.org> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2011-12-14target: Fix possible NULL pointer with __transport_execute_tasksNicholas Bellinger
This patch makes __transport_execute_tasks() use a local *se_dev reference to prevent direct se_cmd->se_dev access after transport_cmd_check_stop() -> transport_add_tasks_from_cmd() has been called, as in the current implementation we can expect __transport_execute_tasks() may be called from another context that may have already completed the I/O. Cc: Christoph Hellwig <hch@lst.de> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2011-12-14tcm_fc: Convert ft_send_work to use target_submit_cmdNicholas Bellinger
This patch converts the main ft_send_work() I/O path to use target_submit_cmd() with a single se_cmd->cmd_kref reference that is released via the existing ft_check_stop_free() response path callback. It also makes ft_send_tm() use transport_init_se_cmd() and target_get_sess_cmd() to also use single se_cmd->cmd_kref reference. Cc: Christoph Hellwig <hch@lst.de> Cc: Kiran Patil <kiran.patil@intel.com> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2011-12-14target: Add target_submit_cmd() for process context fabric submissionNicholas Bellinger
This patch adds a target_submit_cmd() caller that can be used by fabrics to submit an uninitialized se_cmd descriptor to an struct se_session + unpacked_lun from workqueue process context. This call will invoke the following steps: - transport_init_se_cmd() to setup se_cmd specific pointers - Obtain se_cmd->cmd_kref references with target_get_sess_cmd() - set se_cmd->t_tasks_bidi - transport_lookup_cmd_lun() to setup struct se_cmd->se_lun from the passed unpacked_lun - transport_generic_allocate_tasks() to setup the passed *cdb, and - transport_handle_cdb_direct() handle READ dispatch or WRITE ready-to-transfer callback to fabric v2 changes from hch feedback: *) Add target_sc_flags_table for target_submit_cmd flags *) Rename bidi parameter to flags, add TARGET_SCF_BIDI_OP *) Convert checks to BUG_ON *) Add out_check_cond for transport_send_check_condition_and_sense usage v3 changes: *) Add TARGET_SCF_ACK_KREF for target_submit_cmd into target_get_sess_cmd to determine when the fabric caller is expecting a second kref_put() from fabric packet acknowledgement. Cc: Christoph Hellwig <hch@lst.de> Cc: Roland Dreier <roland@purestorage.com> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2011-12-14target: Make target_put_sess_cmd use target_release_cmd_krefNicholas Bellinger
This patch moves target_put_sess_cmd() to use a se_cmd->cmd_kref callback target_release_cmd_kref when performing driver release of fabric->se_cmd descriptor memory. It sets the default cmd_kref count value to '2' within target_get_sess_cmd() setup, and currently assumes TFO->check_stop_free() usage. It drops se_tfo->check_release_cmd() usage in the main transport_release_cmd codepath. Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2011-12-14target: Set response format in INQUIRY responseRoland Dreier
Current SCSI specs say that the "response format" field in the standard INQUIRY response should be set to 2, and all the real SCSI devices I have do put 2 here. So let's do that too. Signed-off-by: Roland Dreier <roland@purestorage.com> Cc: stable@kernel.org Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2011-12-14tcm_loop: bump max_sectorsChristoph Hellwig
There is not reason to artifically limit max_sectors in tcm_loop, set it to UINT_MAX to allow stressing the large I/O handling in the target core using the loopback driver. Also remove various superflous defines hiding the values set in the host template. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2011-12-14target/configs: remove trailing newline from udev_path and aliasSebastian Andrzej Siewior
This patch strips the trailing newline from backend device udev_path and alias attributes. Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2011-12-14iscsi-target: fix chap identifier simple_strtoul usageNicholas Bellinger
This patch makes chap_server_compute_md5() use proper unsigned long usage for the CHAP_I (identifier) and check for values beyond 255 as per RFC-1994. Reported-by: Joern Engel <joern@logfs.org> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2011-12-14target: remove useless castsJörn Engel
A reader should spend an extra moment whenever noticing a cast, because either something special is going on that deserves extra attention or, as is all too often the case, the code is wrong. These casts, afaics, have all been useless. They cast a foo* to a foo*, cast a void* to the assigned type, cast a foo* to void*, before assigning it to a void* variable, etc. In a few cases I also removed an additional &...[0], which is equally useless. Lastly I added three FIXMEs where, to the best of my judgement, the code appears to have a bug. It would be good if someone could check these. Signed-off-by: Joern Engel <joern@logfs.org> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2011-12-14target: simplify target_check_cdb_and_preemptJörn Engel
- rename to target_check_cdb_and_preempt - use non-safe list_for_each_entry - move common check into callee (simplifying callers) Signed-off-by: Joern Engel <joern@logfs.org> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2011-12-14target: Move core_scsi3_check_cdb_abort_and_preemptJörn Engel
And make it static afterwards. Signed-off-by: Joern Engel <joern@logfs.org> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2011-12-14target: use \n as a separator for configurationSebastian Andrzej Siewior
The command | echo rd_pages=32768 > ramdisk/control Does not work because it writes "rd_pages=32768\n" and the parser which matches for "rd_pages=%d" does not recognize it due to the \n. One way of fixing this would be using "echo -n" instead. This patch adds \n to the list of separators so we don't have to use the -n argument which I find is more convinient. Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2011-12-14target: make the se_task task_state_active a normal boolChristoph Hellwig
There is no need to make task_state_active an atomic_t given that it is always set under the execute_task_lock so we can make it a simple bool. Also rename it to t_state_active to be closer to the list it guards, and make sure all checks before the list addion/removal actually happen under execute_task_lock. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2011-12-14target: remove the se_task task_error_status fieldChristoph Hellwig
We only reach transport_complete_task once per task, so the test and set on task_error_status is never going to have an effect. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2011-12-14target: fold se_task.task_sense into task_flagsChristoph Hellwig
Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2011-12-14target: header reshuffle, part2Christoph Hellwig
This reorganized the headers under include/target into: - target_core_base.h stays as is with all target-wide data stuctures and defines - target_core_backend.h contains the whole interface to I/O backends - target_core_fabric.h contains the whole interface to fabric modules Except for those only the various configfs macro headers stay around. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2011-12-14target: reshuffle headersChristoph Hellwig
Create a new headers, drivers/target/target_core_internal.h that is supposed to hold all target_core-internal prototypes. Move all non-exported includes from include/target to it, and merge the smaller prototype-only includes inside drivers/target into it as well. Mark functions that were found to not be called outside their implementation file static. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2011-12-06iscsi-target: Fix hex2bin warn_unused compile messageNicholas Bellinger
Fix the following compile warning with hex2bin() usage: drivers/target/iscsi/iscsi_target_auth.c: In function ‘chap_string_to_hex’: drivers/target/iscsi/iscsi_target_auth.c:35: warning: ignoring return value of ‘hex2bin’, declared with attribute warn_unused_result Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2011-12-06target: Don't return an error if disabling unsupported featuresAndy Grover
If an attribute is present (but not yet supported) it should be OK to write 0 (a no-op) to the attribute. This is an issue because userspace should be able to save and restore all set attribute values without error. Signed-off-by: Andy Grover <agrover@redhat.com> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2011-12-06target/rd: fix or rewrite the copy routineSebastian Andrzej Siewior
So the code assumes that the sg list is only a array while in reality loopback SGL memory via scsi_cmnd into target-core may be already chained. This patch converts ramdisk code to use sg_miter logic from scatterlist.h in order to properly support passthrough SGL usage with transport_generic_map_mem_to_cmd() via loopback. With this patch the bug goes away. However after umount/mount of the device my files are gone. So something is still not right. After looking at it for a while I decided to rewrite the that part of the code and now things do work for me. For reference: - http://article.gmane.org/gmane.linux.scsi.target.devel/595 the sg_next() conversion - http://article.gmane.org/gmane.linux.scsi.target.devel/602 the rewrite of the copy code (nab: Fix compile warning in rd_MEMCPY) Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Cc: stable@kernel.org Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2011-12-06target/rd: simplify the page/offset computationSebastian Andrzej Siewior
Breakout rd_MEMCPY_do_task() usage of do_div() to tmp value during rd_request->rd_page assignment. Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2011-12-06target: remove the unused se_dev_listChristoph Hellwig
Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2011-12-06target/file: walk properly over sg listSebastian Andrzej Siewior
This patch changes fileio to use for_each_sg() when walking se_task->task_sg memory passed into from loopback LLD struct scsi_cmnd scatterlist memory. This addresses an issue where FILEIO backends with loopback where hitting the following OOPs with mkfs.ext2: |kernel BUG at include/linux/scatterlist.h:97! |invalid opcode: 0000 [#1] PREEMPT SMP |Modules linked in: sd_mod tcm_loop target_core_stgt scsi_tgt target_core_pscsi target_core_file target_core_iblock target_core_mod configfs scsi_mod | |Pid: 671, comm: LIO_fileio Not tainted 3.1.0-rc10+ #139 Bochs Bochs |EIP: 0060:[<e0afd746>] EFLAGS: 00010202 CPU: 0 |EIP is at fd_do_task+0x396/0x420 [target_core_file] | [<e0aa7884>] __transport_execute_tasks+0xd4/0x190 [target_core_mod] | [<e0aa797c>] transport_execute_tasks+0x3c/0xf0 [target_core_mod] |EIP: [<e0afd746>] fd_do_task+0x396/0x420 [target_core_file] SS:ESP 0068:dea47e90 Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Cc: Christoph Hellwig <hch@lst.de> Cc: stable@kernel.org Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2011-12-06target: remove unused struct fieldsJörn Engel
Some are never used, some are set but never read, dev_hoq_count is incremented and decremented, but never read. Signed-off-by: Joern Engel <joern@logfs.org> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2011-12-06target: Fix page length in emulated INQUIRY VPD page 86hRoland Dreier
The LSB of the page length is at offset 3, not 2. Signed-off-by: Roland Dreier <roland@purestorage.com> Cc: stable@kernel.org Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2011-12-06target: Handle 0 correctly in transport_get_sectors_6()Roland Dreier
SBC-3 says: A TRANSFER LENGTH field set to zero specifies that 256 logical blocks shall be written. Any other value specifies the number of logical blocks that shall be written. The old code was always just returning the value in the TRANSFER LENGTH byte. Fix this to return 256 if the byte is 0. Signed-off-by: Roland Dreier <roland@purestorage.com> Cc: stable@kernel.org Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2011-12-06target: Don't return an error status for 0-length READ and WRITERoland Dreier
IO commands with a TRANSFER LENGTH of 0 are not an error; for example, for READ (10) and WRITE (10), SBC-3 says: A TRANSFER LENGTH field set to zero specifies that no logical blocks shall be read. This condition shall not be considered an error. In case we have nothing to do, just complete the command with good status. Signed-off-by: Roland Dreier <roland@purestorage.com> Cc: stable@kernel.org Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2011-12-06iscsi-target: Use kmemdup rather than duplicating its implementationThomas Meyer
The semantic patch that makes this change is available in scripts/coccinelle/api/memdup.cocci. Signed-off-by: Thomas Meyer <thomas@m3y3r.de> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2011-12-06iscsi-target: Add missing F_BIT for iscsi_tm_rspNicholas Bellinger
This patch sets the missing ISCSI_FLAG_CMD_FINAL bit in iscsit_send_task_mgt_rsp() for a struct iscsi_tm_rsp PDU. This usage is hardcoded for all TM response PDUs in RFC-3720 section 10.6. Reported-by: whucecil <whucecil1999@gmail.com> Cc: stable@kernel.org Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2011-12-06iscsi-target: Fix residual count hanlding + remove iscsi_cmd->residual_countNicholas Bellinger
This patch fixes iscsi-target handling of underflow where residual data is causing an OOPs by using the incorrect iscsi_cmd_t->data_length initially assigned in iscsit_allocate_se_cmd(). It resets iscsi_cmd_t->data_length from se_cmd_t->data_length after transport_generic_allocate_tasks() has been invoked in iscsit_handle_scsi_cmd() RX context, and converts iscsi_cmd->residual_count usage to access iscsi_cmd->se_cmd.residual_count to get the proper residual count set by target-core. Reported-by: <lists@internyc.net> Cc: Christoph Hellwig <hch@lst.de> Cc: Andy Grover <agrover@redhat.com> Cc: stable@kernel.org Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2011-12-06target: Reject SCSI data overflow for fabrics using ↵Nicholas Bellinger
transport_generic_map_mem_to_cmd This patch changes transport_generic_map_mem_to_cmd() to reject SCSI data overflow and to send exception status with CHECK_CONDITION + TCM_INVALID_CDB_FIELD for fabrics that are passing a pre-populated struct scatterlist (eg: tcm_loop and iscsi-target) being mapped into se_cmd->t_data_sg and se_cmd->t_data_nents. This addresses an OOPs where transport_allocate_data_tasks() would walk the incorrect post OVERFLOW cmd->data_length value beyond the end of the passed scatterlist. Cc: Christoph Hellwig <hch@lst.de> Cc: Andy Grover <agrover@redhat.com> Cc: stable@kernel.org Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2011-12-06target: remove the t_tasks_bidi se_cmd fieldChristoph Hellwig
And use a SCF_BIDI flag instead. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2011-12-06target: remove the t_tasks_fua se_cmd fieldChristoph Hellwig
And use a SCF_FUA flag instead. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2011-12-06target: remove the se_ordered_node se_cmd fieldChristoph Hellwig
We never walk ordered_cmd_list in the se_device, so remove all code related to supporting it. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2011-12-06target: remove the se_obj_ptr and se_orig_obj_ptr se_cmd fieldsChristoph Hellwig
We already have a perfectly valid se_device pointer in the command, so remove the mostly useless duplicates. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2011-12-06target: Drop config_item_name usage in fabric TFO->free_wwn()Nicholas Bellinger
This patch removes config_item_name() informational usage of TFO->free_wwn() treewide in loopback, tcm_fc, ib_srpt and tcm_vhost module code. Using v4 target_core_fabric_configfs.c logic, a fabric call for config_item_name() in TFO->drop_wwn() context returns NULL as target_fabric_drop_wwn() invoking config_item_put() -> config_group_put() will release fabric_port->port_wwn.wwn_group before the last config_item_put() -> TFO->drop_wwn() is invoked. Reported-by: Bart Van Assche <bvanassche@acm.org> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2011-12-06target: Get rid of unused se_cmd_cacheRoland Dreier
Signed-off-by: Roland Dreier <roland@purestorage.com> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2011-12-06target: Improve system responsivity during I/OBart Van Assche
While testing ib_srpt I noticed that the target system became rather unresponsive during intensive I/O. The patch below made my target system responsive again during I/O without decreasing performance. Signed-off-by: Bart Van Assche <bvanassche@acm.org> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2011-12-06iscsi-target: Fix sess allocation leak in iscsi_login_zero_tsih_s1Nicholas Bellinger
This patch adds missing kfree() for an allocation in iscsi_login_zero_tsih_s1() code, and make transport_init_session() check for IS_ERR() returns. Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2011-12-06target: Address legacy PYX_TRANSPORT_* return code breakageNicholas Bellinger
This patch removes legacy usage of PYX_TRANSPORT_* return codes in a number of locations and addresses cases where transport_generic_request_failure() was returning the incorrect sense upon CHECK_CONDITION status after the v3.1 converson to use errno return codes. This includes the conversion of transport_generic_request_failure() to process cmd->scsi_sense_reason and handle extra TCM_RESERVATION_CONFLICT before calling transport_send_check_condition_and_sense() to queue up response status. It also drops PYX_TRANSPORT_OUT_OF_MEMORY_RESOURCES legacy usgae, and returns TCM_LOGICAL_UNIT_COMMUNICATION_FAILURE w/ a response for these cases. transport_generic_allocate_tasks(), transport_generic_new_cmd(), backend SCF_SCSI_DATA_SG_IO_CDB ->do_task(), and emulated ->execute_task() have all been updated to set se_cmd->scsi_sense_reason and return errno codes universally upon failure. This includes cmd->scsi_sense_reason assignment in target_core_alua.c, target_core_pr.c and target_core_cdb.c emulation code. Finally it updates fabric modules to remove the legacy usage, and for TFO->new_cmd_map() callers forwards return values outside of fabric code. iscsi-target has also been updated to remove a handful of special cases related to the cleanup and signaling QUEUE_FULL handling w/ ft_write_pending() (v2: Drop extra SCF_SCSI_CDB_EXCEPTION check during failure from transport_generic_new_cmd, and re-add missing task->task_error_status assignment in transport_complete_task) Cc: Christoph Hellwig <hch@lst.de> Cc: stable@kernel.org Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2011-11-06Merge branch 'modsplit-Oct31_2011' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/paulg/linux * 'modsplit-Oct31_2011' of git://git.kernel.org/pub/scm/linux/kernel/git/paulg/linux: (230 commits) Revert "tracing: Include module.h in define_trace.h" irq: don't put module.h into irq.h for tracking irqgen modules. bluetooth: macroize two small inlines to avoid module.h ip_vs.h: fix implicit use of module_get/module_put from module.h nf_conntrack.h: fix up fallout from implicit moduleparam.h presence include: replace linux/module.h with "struct module" wherever possible include: convert various register fcns to macros to avoid include chaining crypto.h: remove unused crypto_tfm_alg_modname() inline uwb.h: fix implicit use of asm/page.h for PAGE_SIZE pm_runtime.h: explicitly requires notifier.h linux/dmaengine.h: fix implicit use of bitmap.h and asm/page.h miscdevice.h: fix up implicit use of lists and types stop_machine.h: fix implicit use of smp.h for smp_processor_id of: fix implicit use of errno.h in include/linux/of.h of_platform.h: delete needless include <linux/module.h> acpi: remove module.h include from platform/aclinux.h miscdevice.h: delete unnecessary inclusion of module.h device_cgroup.h: delete needless include <linux/module.h> net: sch_generic remove redundant use of <linux/module.h> net: inet_timewait_sock doesnt need <linux/module.h> ... Fix up trivial conflicts (other header files, and removal of the ab3550 mfd driver) in - drivers/media/dvb/frontends/dibx000_common.c - drivers/media/video/{mt9m111.c,ov6650.c} - drivers/mfd/ab3550-core.c - include/linux/dmaengine.h
2011-11-06Merge branch 'for-next' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/nab/target-pending * 'for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/nab/target-pending: target: use ->exectute_task for all CDB emulation target: remove SCF_EMULATE_CDB_ASYNC target: refactor transport_emulate_control_cdb target: pass the se_task to the CDB emulation callback target: split core_scsi3_emulate_pr target: split core_scsi2_emulate_crh target: Add generic active I/O shutdown logic target: add back error handling in transport_complete_task target/pscsi: blk_make_request() returns an ERR_PTR() target: Remove core TRANSPORT_FREE_CMD_INTR usage target: Make TFO->check_stop_free return free status iscsi-target: Fix non-immediate TMR handling iscsi-target: Add missing CMDSN_LOWER_THAN_EXP check in iscsit_handle_scsi_cmd target: Avoid double list_del for aborted se_tmr_req target: Minor cleanups to core_tmr_drain_tmr_list target: Fix wrong se_tmr being added to drain_tmr_list target: Fix incorrect se_cmd assignment in core_tmr_drain_tmr_list target: Check -ENOMEM to signal QUEUE_FULL from fabric callbacks tcm_loop: Add explict read buffer memset for SCF_SCSI_CONTROL_SG_IO_CDB target: Fix compile warning w/ missing module.h include
2011-11-04target: use ->exectute_task for all CDB emulationChristoph Hellwig
Instead of calling into transport_emulate_control_cdb from __transport_execute_tasks for some CDBs always set up ->exectute_tasks in the command sequence and use it uniformly. (nab: Add default passthrough break for SERVICE_ACTION_IN) Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2011-11-04target: remove SCF_EMULATE_CDB_ASYNCChristoph Hellwig
All ->execute_task instances now need to complete the I/O explicitly, which can either happen synchronously or asynchronously. Note that a lot of the CDB emulations appear to return success even if some lowlevel operations failed. Given that this is an existing issue this patch doesn't change that fact. (nab: Adding missing switch breaks in PR-IN + PR_OUT) Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2011-11-04target: refactor transport_emulate_control_cdbChristoph Hellwig
Encapsulate each CDB emulation into a function of its own, to prepare setting ->exectute_task to these routines. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>