summaryrefslogtreecommitdiff
path: root/drivers/video
AgeCommit message (Collapse)Author
2012-05-12Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netLinus Torvalds
Pull networking fixes from David S. Miller: 1) Since we do RCU lookups on ipv4 FIB entries, we have to test if the entry is dead before returning it to our caller. 2) openvswitch locking and packet validation fixes from Ansis Atteka, Jesse Gross, and Pravin B Shelar. 3) Fix PM resume locking in IGB driver, from Benjamin Poirier. 4) Fix VLAN header handling in vhost-net and macvtap, from Basil Gor. 5) Revert a bogus network namespace isolation change that was causing regressions on S390 networking devices. 6) If bonding decides to process and handle a LACPDU frame, we shouldn't bump the rx_dropped counter. From Jiri Bohac. 7) Fix mis-calculation of available TX space in r8169 driver when doing TSO, which can lead to crashes and/or hung device. From Julien Ducourthial. 8) SCTP does not validate cached routes properly in all cases, from Nicolas Dichtel. 9) Link status interrupt needs to be handled in ks8851 driver, from Stephen Boyd. 10) Use capable(), not cap_raised(), in connector/userns netlink code. From Eric W. Biederman via Andrew Morton. 11) Fix pktgen OOPS on module unload, from Eric Dumazet. 12) iwlwifi under-estimates SKB truesizes, also from Eric Dumazet. 13) Cure division by zero in SFC driver, from Ben Hutchings. * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (26 commits) ks8851: Update link status during link change interrupt macvtap: restore vlan header on user read vhost-net: fix handle_rx buffer size bonding: don't increase rx_dropped after processing LACPDUs connector/userns: replace netlink uses of cap_raised() with capable() sctp: check cached dst before using it pktgen: fix crash at module unload Revert "net: maintain namespace isolation between vlan and real device" ehea: fix losing of NEQ events when one event occurred early igb: fix rtnl race in PM resume path ipv4: Do not use dead fib_info entries. r8169: fix unsigned int wraparound with TSO sfc: Fix division by zero when using one RX channel and no SR-IOV openvswitch: Validation of IPv6 set port action uses IPv4 header net: compare_ether_addr[_64bits]() has no ordering cdc_ether: Ignore bogus union descriptor for RNDIS devices bnx2x: bug fix when loading after SAN boot e1000: Silence sparse warnings by correcting type igb, ixgbe: netdev_tx_reset_queue incorrectly called from tx init path openvswitch: Release rtnl_lock if ovs_vport_cmd_build_info() failed. ...
2012-05-10connector/userns: replace netlink uses of cap_raised() with capable()Eric W. Biederman
In 2009 Philip Reiser notied that a few users of netlink connector interface needed a capability check and added the idiom cap_raised(nsp->eff_cap, CAP_SYS_ADMIN) to a few of them, on the premise that netlink was asynchronous. In 2011 Patrick McHardy noticed we were being silly because netlink is synchronous and removed eff_cap from the netlink_skb_params and changed the idiom to cap_raised(current_cap(), CAP_SYS_ADMIN). Looking at those spots with a fresh eye we should be calling capable(CAP_SYS_ADMIN). The only reason I can see for not calling capable is that it once appeared we were not in the same task as the caller which would have made calling capable() impossible. In the initial user_namespace the only difference between between cap_raised(current_cap(), CAP_SYS_ADMIN) and capable(CAP_SYS_ADMIN) are a few sanity checks and the fact that capable(CAP_SYS_ADMIN) sets PF_SUPERPRIV if we use the capability. Since we are going to be using root privilege setting PF_SUPERPRIV seems the right thing to do. The motivation for this that patch is that in a child user namespace cap_raised(current_cap(),...) tests your capabilities with respect to that child user namespace not capabilities in the initial user namespace and thus will allow processes that should be unprivielged to use the kernel services that are only protected with cap_raised(current_cap(),..). To fix possible user_namespace issues and to just clean up the code replace cap_raised(current_cap(), CAP_SYS_ADMIN) with capable(CAP_SYS_ADMIN). Signed-off-by: Eric W. Biederman <ebiederm@xmission.com> Cc: Patrick McHardy <kaber@trash.net> Cc: Philipp Reisner <philipp.reisner@linbit.com> Acked-by: Serge E. Hallyn <serge.hallyn@canonical.com> Acked-by: Andrew G. Morgan <morgan@kernel.org> Cc: Vasiliy Kulikov <segoon@openwall.com> Cc: David Howells <dhowells@redhat.com> Reviewed-by: James Morris <james.l.morris@oracle.com> Cc: David Miller <davem@davemloft.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-05-10parisc: move definition of PAGE0 to asm/page.hRolf Eike Beer
This was defined in asm/pdc.h which needs to include asm/page.h for __PAGE_OFFSET. This leads to an include loop so that page.h eventually will include pdc.h again. While this is no problem because of header guards, it is a problem because some symbols may be undefined. Such an error is this: In file included from include/linux/bitops.h:35:0, from include/asm-generic/getorder.h:7, from arch/parisc/include/asm/page.h:162, from arch/parisc/include/asm/pdc.h:346, from arch/parisc/include/asm/processor.h:16, from arch/parisc/include/asm/spinlock.h:6, from arch/parisc/include/asm/atomic.h:20, from include/linux/atomic.h:4, from include/linux/sysfs.h:20, from include/linux/kobject.h:21, from include/linux/device.h:17, from include/linux/eisa.h:5, from arch/parisc/kernel/pci.c:11: arch/parisc/include/asm/bitops.h: In function ‘set_bit’: arch/parisc/include/asm/bitops.h:82:2: error: implicit declaration of function ‘_atomic_spin_lock_irqsave’ [-Werror=implicit-function-declaration] arch/parisc/include/asm/bitops.h:84:2: error: implicit declaration of function ‘_atomic_spin_unlock_irqrestore’ [-Werror=implicit-function-declaration] Signed-off-by: Rolf Eike Beer <eike-kernel@sf-tec.de> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-05-08Merge tag 'stable/for-linus-3.4-rc6-tag' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/konrad/xen Pull xen fixes from Konrad Rzeszutek Wilk: - fix to Kconfig to make it fit within 80 line characters, - two bootup fixes (AMD 8-core and with PCI BIOS), - cleanup code in a Xen PV fb driver, - and a crash fix when trying to see non-existent PTE's * tag 'stable/for-linus-3.4-rc6-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/konrad/xen: xen/Kconfig: fix Kconfig layout xen/pci: don't use PCI BIOS service for configuration space accesses xen/pte: Fix crashes when trying to see non-existent PGD/PMD/PUD/PTEs xen/apic: Return the APIC ID (and version) for CPU 0. drivers/video/xen-fbfront.c: add missing cleanup code
2012-05-07drivers/video/xen-fbfront.c: add missing cleanup codeJulia Lawall
The operations in the subsequent error-handling code appear to be also useful here. Acked-by: Florian Tobias Schandinat <FlorianSchandinat@gmx.de> Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr> [v1: Collapse some of the error handling functions] [v2: Fix compile warning] Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
2012-04-26blackfin: fix compile error in bfin-lq035q1-fb.cPaul Gortmaker
This file has an implicit dependency on GPIO stuff, showing up as the following build failure: drivers/video/bfin-lq035q1-fb.c:369:6: error: 'GPIOF_OUT_INIT_LOW' undeclared Other more global bfin build issues prevent an automated bisect, but it really doesn't matter - simply add in the appropriate header. Cc: Florian Tobias Schandinat <FlorianSchandinat@gmx.de> Acked-by: Mike Frysinger <vapier@gentoo.org> Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
2012-04-15Merge tag 'fixes-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull "ARM: a few more SoC fixes for 3.4-rc" from Olof Johansson: - A handful of warning and build fixes for Qualcomm MSM - Build/warning and bug fixes for Samsung Exynos - A fix from Rob Herring that removes misplaced interrupt-parent properties from a few device trees - A fix to OMAP dealing with cpufreq build errors, removing some of the offending code since it was redundant anyway * tag 'fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: ARM: OMAP: clock: cleanup CPUfreq leftovers, fix build errors ARM: dts: remove blank interrupt-parent properties ARM: EXYNOS: Fix Kconfig dependencies for device tree enabled machine files ARM: EXYNOS: Remove broken config values for touchscren for NURI board ARM: EXYNOS: set fix xusbxti clock for NURI and Universal210 boards ARM: EXYNOS: fix regulator name for NURI board ARM: SAMSUNG: make SAMSUNG_PM_DEBUG select DEBUG_LL ARM: msm: Fix section mismatches in proc_comm.c video: msm: Fix section mismatches in mddi.c arm: msm: trout: fix compile failure arm: msm: halibut: remove unneeded fixup ARM: EXYNOS: Add PDMA and MDMA physical base address defines ARM: S5PV210: Fix compiler warning in dma.c file ARM: EXYNOS: Fix compile error in exynos5250-cpufreq.c ARM: EXYNOS: Add missing definition for IRQ_I2S0 ARM: S5PV210: fix unused LDO supply field from wm8994_pdata
2012-04-13video: msm: Fix section mismatches in mddi.cDavid Brown
The change commit 461cbe77d0a4f887c33a3a95ea68a7daf23b4302 Author: Gregory Bean <gbean@codeaurora.org> Date: Wed Jul 28 10:22:13 2010 -0700 video: msm: Fix section mismatch in mddi.c. fixes a section mismatch between the board file and the driver's probe function, however, it misses the additional mismatches between the probe function and some routines it calls. Fix these up as well. Signed-off-by: David Brown <davidb@codeaurora.org>
2012-04-09video:uvesafb: Fix oops that uvesafb try to execute NX-protected pageWang YanQing
This patch fix the oops below that catched in my machine [ 81.560602] uvesafb: NVIDIA Corporation, GT216 Board - 0696a290, Chip Rev , OEM: NVIDIA, VBE v3.0 [ 81.609384] uvesafb: protected mode interface info at c000:d350 [ 81.609388] uvesafb: pmi: set display start = c00cd3b3, set palette = c00cd40e [ 81.609390] uvesafb: pmi: ports = 3b4 3b5 3ba 3c0 3c1 3c4 3c5 3c6 3c7 3c8 3c9 3cc 3ce 3cf 3d0 3d1 3d2 3d3 3d4 3d5 3da [ 81.614558] uvesafb: VBIOS/hardware doesn't support DDC transfers [ 81.614562] uvesafb: no monitor limits have been set, default refresh rate will be used [ 81.614994] uvesafb: scrolling: ypan using protected mode interface, yres_virtual=4915 [ 81.744147] kernel tried to execute NX-protected page - exploit attempt? (uid: 0) [ 81.744153] BUG: unable to handle kernel paging request at c00cd3b3 [ 81.744159] IP: [<c00cd3b3>] 0xc00cd3b2 [ 81.744167] *pdpt = 00000000016d6001 *pde = 0000000001c7b067 *pte = 80000000000cd163 [ 81.744171] Oops: 0011 [#1] SMP [ 81.744174] Modules linked in: uvesafb(+) cfbcopyarea cfbimgblt cfbfillrect [ 81.744178] [ 81.744181] Pid: 3497, comm: modprobe Not tainted 3.3.0-rc4NX+ #71 Acer Aspire 4741 /Aspire 4741 [ 81.744185] EIP: 0060:[<c00cd3b3>] EFLAGS: 00010246 CPU: 0 [ 81.744187] EIP is at 0xc00cd3b3 [ 81.744189] EAX: 00004f07 EBX: 00000000 ECX: 00000000 EDX: 00000000 [ 81.744191] ESI: f763f000 EDI: f763f6e8 EBP: f57f3a0c ESP: f57f3a00 [ 81.744192] DS: 007b ES: 007b FS: 00d8 GS: 0033 SS: 0068 [ 81.744195] Process modprobe (pid: 3497, ti=f57f2000 task=f748c600 task.ti=f57f2000) [ 81.744196] Stack: [ 81.744197] f82512c5 f759341c 00000000 f57f3a30 c124a9bc 00000001 00000001 000001e0 [ 81.744202] f8251280 f763f000 f7593400 00000000 f57f3a40 c12598dd f5c0c000 00000000 [ 81.744206] f57f3b10 c1255efe c125a21a 00000006 f763f09c 00000000 c1c6cb60 f7593400 [ 81.744210] Call Trace: [ 81.744215] [<f82512c5>] ? uvesafb_pan_display+0x45/0x60 [uvesafb] [ 81.744222] [<c124a9bc>] fb_pan_display+0x10c/0x160 [ 81.744226] [<f8251280>] ? uvesafb_vbe_find_mode+0x180/0x180 [uvesafb] [ 81.744230] [<c12598dd>] bit_update_start+0x1d/0x50 [ 81.744232] [<c1255efe>] fbcon_switch+0x39e/0x550 [ 81.744235] [<c125a21a>] ? bit_cursor+0x4ea/0x560 [ 81.744240] [<c129b6cb>] redraw_screen+0x12b/0x220 [ 81.744245] [<c128843b>] ? tty_do_resize+0x3b/0xc0 [ 81.744247] [<c129ef42>] vc_do_resize+0x3d2/0x3e0 [ 81.744250] [<c129efb4>] vc_resize+0x14/0x20 [ 81.744253] [<c12586bd>] fbcon_init+0x29d/0x500 [ 81.744255] [<c12984c4>] ? set_inverse_trans_unicode+0xe4/0x110 [ 81.744258] [<c129b378>] visual_init+0xb8/0x150 [ 81.744261] [<c129c16c>] bind_con_driver+0x16c/0x360 [ 81.744264] [<c129b47e>] ? register_con_driver+0x6e/0x190 [ 81.744267] [<c129c3a1>] take_over_console+0x41/0x50 [ 81.744269] [<c1257b7a>] fbcon_takeover+0x6a/0xd0 [ 81.744272] [<c12594b8>] fbcon_event_notify+0x758/0x790 [ 81.744277] [<c10929e2>] notifier_call_chain+0x42/0xb0 [ 81.744280] [<c1092d30>] __blocking_notifier_call_chain+0x60/0x90 [ 81.744283] [<c1092d7a>] blocking_notifier_call_chain+0x1a/0x20 [ 81.744285] [<c124a5a1>] fb_notifier_call_chain+0x11/0x20 [ 81.744288] [<c124b759>] register_framebuffer+0x1d9/0x2b0 [ 81.744293] [<c1061c73>] ? ioremap_wc+0x33/0x40 [ 81.744298] [<f82537c6>] uvesafb_probe+0xaba/0xc40 [uvesafb] [ 81.744302] [<c12bb81f>] platform_drv_probe+0xf/0x20 [ 81.744306] [<c12ba558>] driver_probe_device+0x68/0x170 [ 81.744309] [<c12ba731>] __device_attach+0x41/0x50 [ 81.744313] [<c12b9088>] bus_for_each_drv+0x48/0x70 [ 81.744316] [<c12ba7f3>] device_attach+0x83/0xa0 [ 81.744319] [<c12ba6f0>] ? __driver_attach+0x90/0x90 [ 81.744321] [<c12b991f>] bus_probe_device+0x6f/0x90 [ 81.744324] [<c12b8a45>] device_add+0x5e5/0x680 [ 81.744329] [<c122a1a3>] ? kvasprintf+0x43/0x60 [ 81.744332] [<c121e6e4>] ? kobject_set_name_vargs+0x64/0x70 [ 81.744335] [<c121e6e4>] ? kobject_set_name_vargs+0x64/0x70 [ 81.744339] [<c12bbe9f>] platform_device_add+0xff/0x1b0 [ 81.744343] [<f8252906>] uvesafb_init+0x50/0x9b [uvesafb] [ 81.744346] [<c100111f>] do_one_initcall+0x2f/0x170 [ 81.744350] [<f82528b6>] ? uvesafb_is_valid_mode+0x66/0x66 [uvesafb] [ 81.744355] [<c10c6994>] sys_init_module+0xf4/0x1410 [ 81.744359] [<c1157fc0>] ? vfsmount_lock_local_unlock_cpu+0x30/0x30 [ 81.744363] [<c144cb10>] sysenter_do_call+0x12/0x36 [ 81.744365] Code: f5 00 00 00 32 f6 66 8b da 66 d1 e3 66 ba d4 03 8a e3 b0 1c 66 ef b0 1e 66 ef 8a e7 b0 1d 66 ef b0 1f 66 ef e8 fa 00 00 00 61 c3 <60> e8 c8 00 00 00 66 8b f3 66 8b da 66 ba d4 03 b0 0c 8a e5 66 [ 81.744388] EIP: [<c00cd3b3>] 0xc00cd3b3 SS:ESP 0068:f57f3a00 [ 81.744391] CR2: 00000000c00cd3b3 [ 81.744393] ---[ end trace 18b2c87c925b54d6 ]--- Signed-off-by: Wang YanQing <udknight@gmail.com> Cc: Michal Januszewski <spock@gentoo.org> Cc: Alan Cox <alan@lxorguk.ukuu.org.uk> Signed-off-by: Florian Tobias Schandinat <FlorianSchandinat@gmx.de> Cc: stable@vger.kernel.org
2012-04-08fbdev: fix au1*fb buildsManuel Lauss
Commit 1c16697bf9d5b206cb0d2b905a54de5e077296be ("drivers/video/au*fb.c: use devm_ functions) introduced 2 build failures in the au1100fb and au1200fb drivers, fix them. Signed-off-by: Manuel Lauss <manuel.lauss@googlemail.com> Signed-off-by: Florian Tobias Schandinat <FlorianSchandinat@gmx.de>
2012-04-08kyrofb: fix on x86_64Ondrej Zary
kyrofb is completely broken on x86_64 because the registers are defined as unsigned long. Change them to u32 to make the driver work. Tested with Hercules 3D Prophet 4000XT. Signed-off-by: Ondrej Zary <linux@rainbow-software.org> Acked-by: Paul Mundt <lethal@linux-sh.org> Signed-off-by: Florian Tobias Schandinat <FlorianSchandinat@gmx.de>
2012-04-05Merge tag 'fixes-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull "ARM: SoC fixes: from Olof Johansson: "A bunch of fixes for regressions (and a few other problems) in 3.4-rc1: - Fix for regression of mach/io.h cleanup on platforms with PCI or PCMCIA (adding back the include file on those for now) - AT91 fixes for usb and spi - smsc911x ethernet fixes for i.MX - smsc911x fixes for OMAP - gpio fixes for Tegra - A handful of build error and warning fixes for various platforms - cpufreq kconfig dependencies, build and lowlevel debug fixes for Samsung platforms In other words, more or less the regular collection of -rc1/2 type material. A few of them, in particular the smsc911x for OMAP series, aren't technically regressions for 3.4, but they're valid fixes and we're still relatively early in the rc cycle so it seems appropriate to include them." * tag 'fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (60 commits) ARM: fix __io macro for PCMCIA ARM: EXYNOS: Fix compiler warning in dma.c file ARM: EXYNOS: fix ISO C90 warning ARM: OMAP2+: hwmod: Fix wrong SYSC_TYPE1_XXX_MASK bit definitions ARM: OMAP2+: hwmod: Make omap_hwmod_softreset wait for reset status ARM: OMAP2+: hwmod: Restore sysc after a reset ARM: OMAP2+: omap_hwmod: Allow io_ring wakeup configuration for all modules ARM: OMAP3: clock data: fill in some missing clockdomains ARM: OMAP4: clock data: Force a DPLL clkdm/pwrdm ON before a relock ARM: OMAP4: clock data: fix mult and div mask for USB_DPLL ARM: OMAP2+: powerdomain: Wait for powerdomain transition in pwrdm_state_switch() gpio: tegra: Iterate over the correct number of banks gpio: tegra: fix register address calculations for Tegra30 EXYNOS: fix dependency for EXYNOS_CPUFREQ ARM: at91: dt: remove unit-address part for memory nodes ARM: at91: fix check of valid GPIO for SPI and USB USB: ehci-atmel: add needed of.h header file ARM: at91/NAND DT bindings: add comments ARM: at91/at91sam9x5.dtsi: fix NAND ale/cle in DT file USB: ohci-at91: trivial return code name change ...
2012-04-05Merge branch 'akpm' (Andrew's patch-bomb)Linus Torvalds
Merge batch of fixes from Andrew Morton: "The simple_open() cleanup was held back while I wanted for laggards to merge things. I still need to send a few checkpoint/restore patches. I've been wobbly about merging them because I'm wobbly about the overall prospects for success of the project. But after speaking with Pavel at the LSF conference, it sounds like they're further toward completion than I feared - apparently davem is at the "has stopped complaining" stage regarding the net changes. So I need to go back and re-review those patchs and their (lengthy) discussion." * emailed from Andrew Morton <akpm@linux-foundation.org>: (16 patches) memcg swap: use mem_cgroup_uncharge_swap fix backlight: add driver for DA9052/53 PMIC v1 C6X: use set_current_blocked() and block_sigmask() MAINTAINERS: add entry for sparse checker MAINTAINERS: fix REMOTEPROC F: typo alpha: use set_current_blocked() and block_sigmask() simple_open: automatically convert to simple_open() scripts/coccinelle/api/simple_open.cocci: semantic patch for simple_open() libfs: add simple_open() hugetlbfs: remove unregister_filesystem() when initializing module drivers/rtc/rtc-88pm860x.c: fix rtc irq enable callback fs/xattr.c:setxattr(): improve handling of allocation failures fs/xattr.c:listxattr(): fall back to vmalloc() if kmalloc() failed fs/xattr.c: suppress page allocation failure warnings from sys_listxattr() sysrq: use SEND_SIG_FORCED instead of force_sig() proc: fix mount -t proc -o AAA
2012-04-05backlight: add driver for DA9052/53 PMIC v1Ashish Jangam
DA9052/53 PMIC has capability to supply power for upto 3 banks of 6 white serial LEDS. It can also control intensity of independent banks and to drive these banks boost converter will provide up to 24V and forward current of max 50mA. This patch allows to control intensity of the individual WLEDs bank through DA9052/53 PMIC. This patch is functionally tested on Samsung SMDKV6410. Signed-off-by: David Dajun Chen <dchen@diasemi.com> Signed-off-by: Ashish Jangam <ashish.jangam@kpitcummins.com> Cc: Richard Purdie <rpurdie@rpsys.net> Cc: Samuel Ortiz <sameo@linux.intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-04-02ARM: fix lcd power build failure in collie_defconfigPaul Gortmaker
Commit 086ada54abaa4316e8603f02410fe8ebc9ba2de1 "FB: sa1100: remove global sa1100fb_.*_power function pointers" got rid of all instances but one in locomolcd.c -- which was conditional on CONFIG_SA1100_COLLIE. The associated .power field which replaces the global is populated in mach-sa1100/collie.c so move the assignment there, but make it conditional on the locomolcd support, so use CONFIG_BACKLIGHT_LOCOMO in that file. Cc: arm@kernel.org Acked-by: Russell King <rmk+kernel@arm.linux.org.uk> Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com> Signed-off-by: Olof Johansson <olof@lixom.net>
2012-03-29Merge tag 'cleanup2' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull "ARM: cleanups of io includes" from Olof Johansson: "Rob Herring has done a sweeping change cleaning up all of the mach/io.h includes, moving some of the oft-repeated macros to a common location and removing a bunch of boiler plate. This is another step closer to a common zImage for multiple platforms." Fix up various fairly trivial conflicts (<mach/io.h> removal vs changes around it, tegra localtimer.o is *still* gone, yadda-yadda). * tag 'cleanup2' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (29 commits) ARM: tegra: Include assembler.h in sleep.S to fix build break ARM: pxa: use common IOMEM definition ARM: dma-mapping: convert ARCH_HAS_DMA_SET_COHERENT_MASK to kconfig symbol ARM: __io abuse cleanup ARM: create a common IOMEM definition ARM: iop13xx: fix missing declaration of iop13xx_init_early ARM: fix ioremap/iounmap for !CONFIG_MMU ARM: kill off __mem_pci ARM: remove bunch of now unused mach/io.h files ARM: make mach/io.h include optional ARM: clps711x: remove unneeded include of mach/io.h ARM: dove: add explicit include of dove.h to addr-map.c ARM: at91: add explicit include of hardware.h to uncompressor ARM: ep93xx: clean-up mach/io.h ARM: tegra: clean-up mach/io.h ARM: orion5x: clean-up mach/io.h ARM: davinci: remove unneeded mach/io.h include [media] davinci: remove includes of mach/io.h ARM: OMAP: Remove remaining includes for mach/io.h ARM: msm: clean-up mach/io.h ...
2012-03-29Merge branch 'next' of git://git.infradead.org/users/vkoul/slave-dmaLinus Torvalds
Pull slave-dmaengine update from Vinod Koul: "This includes the cookie cleanup by Russell, the addition of context parameter for dmaengine APIs, more arm dmaengine driver cleanup by moving code to dmaengine, this time for imx by Javier and pl330 by Boojin along with the usual driver fixes." Fix up some fairly trivial conflicts with various other cleanups. * 'next' of git://git.infradead.org/users/vkoul/slave-dma: (67 commits) dmaengine: imx: fix the build failure on x86_64 dmaengine: i.MX: Fix merge of cookie branch. dmaengine: i.MX: Add support for interleaved transfers. dmaengine: imx-dma: use 'dev_dbg' and 'dev_warn' for messages. dmaengine: imx-dma: remove 'imx_dmav1_baseaddr' and 'dma_clk'. dmaengine: imx-dma: remove unused arg of imxdma_sg_next. dmaengine: imx-dma: remove internal structure. dmaengine: imx-dma: remove 'resbytes' field of 'internal' structure. dmaengine: imx-dma: remove 'in_use' field of 'internal' structure. dmaengine: imx-dma: remove sg member from internal structure. dmaengine: imx-dma: remove 'imxdma_setup_sg_hw' function. dmaengine: imx-dma: remove 'imxdma_config_channel_hw' function. dmaengine: imx-dma: remove 'imxdma_setup_mem2mem_hw' function. dmaengine: imx-dma: remove dma_mode member of internal structure. dmaengine: imx-dma: remove data member from internal structure. dmaengine: imx-dma: merge old dma-v1.c with imx-dma.c dmaengine: at_hdmac: add slave config operation dmaengine: add context parameter to prep_slave_sg and prep_dma_cyclic dmaengine/dma_slave: introduce inline wrappers dma: imx-sdma: Treat firmware messages as warnings instead of erros ...
2012-03-28Merge branch 'akpm' (Andrew's patch-bomb)Linus Torvalds
Merge third batch of patches from Andrew Morton: - Some MM stragglers - core SMP library cleanups (on_each_cpu_mask) - Some IPI optimisations - kexec - kdump - IPMI - the radix-tree iterator work - various other misc bits. "That'll do for -rc1. I still have ~10 patches for 3.4, will send those along when they've baked a little more." * emailed from Andrew Morton <akpm@linux-foundation.org>: (35 commits) backlight: fix typo in tosa_lcd.c crc32: add help text for the algorithm select option mm: move hugepage test examples to tools/testing/selftests/vm mm: move slabinfo.c to tools/vm mm: move page-types.c from Documentation to tools/vm selftests/Makefile: make `run_tests' depend on `all' selftests: launch individual selftests from the main Makefile radix-tree: use iterators in find_get_pages* functions radix-tree: rewrite gang lookup using iterator radix-tree: introduce bit-optimized iterator fs/proc/namespaces.c: prevent crash when ns_entries[] is empty nbd: rename the nbd_device variable from lo to nbd pidns: add reboot_pid_ns() to handle the reboot syscall sysctl: use bitmap library functions ipmi: use locks on watchdog timeout set on reboot ipmi: simplify locking ipmi: fix message handling during panics ipmi: use a tasklet for handling received messages ipmi: increase KCS timeouts ipmi: decrease the IPMI message transaction time in interrupt mode ...
2012-03-28backlight: fix typo in tosa_lcd.cMasanari Iida
Fix typo in drivers/video/backlight/tosa_lcd.c "tosa_lcd_reume" should be "tosa_lcd_resume". Signed-off-by: Masanari Iida <standby24x7@gmail.com> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-03-28Merge tag 'split-asm_system_h-for-linus-20120328' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/dhowells/linux-asm_system Pull "Disintegrate and delete asm/system.h" from David Howells: "Here are a bunch of patches to disintegrate asm/system.h into a set of separate bits to relieve the problem of circular inclusion dependencies. I've built all the working defconfigs from all the arches that I can and made sure that they don't break. The reason for these patches is that I recently encountered a circular dependency problem that came about when I produced some patches to optimise get_order() by rewriting it to use ilog2(). This uses bitops - and on the SH arch asm/bitops.h drags in asm-generic/get_order.h by a circuituous route involving asm/system.h. The main difficulty seems to be asm/system.h. It holds a number of low level bits with no/few dependencies that are commonly used (eg. memory barriers) and a number of bits with more dependencies that aren't used in many places (eg. switch_to()). These patches break asm/system.h up into the following core pieces: (1) asm/barrier.h Move memory barriers here. This already done for MIPS and Alpha. (2) asm/switch_to.h Move switch_to() and related stuff here. (3) asm/exec.h Move arch_align_stack() here. Other process execution related bits could perhaps go here from asm/processor.h. (4) asm/cmpxchg.h Move xchg() and cmpxchg() here as they're full word atomic ops and frequently used by atomic_xchg() and atomic_cmpxchg(). (5) asm/bug.h Move die() and related bits. (6) asm/auxvec.h Move AT_VECTOR_SIZE_ARCH here. Other arch headers are created as needed on a per-arch basis." Fixed up some conflicts from other header file cleanups and moving code around that has happened in the meantime, so David's testing is somewhat weakened by that. We'll find out anything that got broken and fix it.. * tag 'split-asm_system_h-for-linus-20120328' of git://git.kernel.org/pub/scm/linux/kernel/git/dhowells/linux-asm_system: (38 commits) Delete all instances of asm/system.h Remove all #inclusions of asm/system.h Add #includes needed to permit the removal of asm/system.h Move all declarations of free_initmem() to linux/mm.h Disintegrate asm/system.h for OpenRISC Split arch_align_stack() out from asm-generic/system.h Split the switch_to() wrapper out of asm-generic/system.h Move the asm-generic/system.h xchg() implementation to asm-generic/cmpxchg.h Create asm-generic/barrier.h Make asm-generic/cmpxchg.h #include asm-generic/cmpxchg-local.h Disintegrate asm/system.h for Xtensa Disintegrate asm/system.h for Unicore32 [based on ver #3, changed by gxt] Disintegrate asm/system.h for Tile Disintegrate asm/system.h for Sparc Disintegrate asm/system.h for SH Disintegrate asm/system.h for Score Disintegrate asm/system.h for S390 Disintegrate asm/system.h for PowerPC Disintegrate asm/system.h for PA-RISC Disintegrate asm/system.h for MN10300 ...
2012-03-28Merge branch 'for_linus' of git://cavan.codon.org.uk/platform-drivers-x86Linus Torvalds
Pull x86 platform driver updates from Matthew Garrett: "Some significant updates to samsung-laptop, additional hardware support for Toshibas, misc updates to various hardware and a new backlight driver for some Apple machines." Fix up trivial conflicts: geode Geos update happening next to net5501 support, and MSIC thermal platform support added twice. * 'for_linus' of git://cavan.codon.org.uk/platform-drivers-x86: (77 commits) acer-wmi: add quirk table for video backlight vendor mode drivers/platform/x86/amilo-rfkill.c::amilo_rfkill_probe() avoid NULL deref samsung-laptop: unregister ACPI video module for some well known laptops acer-wmi: No wifi rfkill on Sony machines thinkpad-acpi: recognize Lenovo as version string in newer V-series BIOS asus-wmi: don't update power and brightness when using scalar eeepc-wmi: split et2012 specific hacks eeepc-wmi: refine quirks handling asus-nb-wmi: set panel_power correctly asus-wmi: move WAPF variable into quirks_entry asus-wmi: store backlight power status for AIO machine asus-wmi: add scalar board brightness adj. support samsung-laptop: cleanup return type: mode_t vs umode_t drivers, samsung-laptop: fix usage of isalnum drivers, samsung-laptop: fix initialization of sabi_data in sabi_set_commandb asus-wmi: on/off bit is not set when reading the value eeepc-wmi: add extra keymaps for EP121 asus-nb-wmi: ignore useless keys acer-wmi: support Lenovo ideapad S205 Brazos wifi switch acer-wmi: fix out of input parameter size when set ...
2012-03-28Merge tag 'mfd_3.4-1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/sameo/mfd-2.6 Pull MFD changes from Samuel Ortiz: - 4 new drivers: Freescale i.MX on-chip Anatop, Ricoh's RC5T583 and TI's TPS65090 and TPS65217. - New variants support (8420, 8520 ab9540), cleanups and bug fixes for the abx500 and db8500 ST-E chipsets. - Some minor fixes and update for the wm8994 from Mark. - The beginning of a long term TWL cleanup effort coming from the TI folks. - Various fixes and cleanups for the s5m, TPS659xx, pm860x, and MAX8997 drivers. Fix up trivial conflicts due to duplicate patches and header file cleanups (<linux/device.h> removal etc). * tag 'mfd_3.4-1' of git://git.kernel.org/pub/scm/linux/kernel/git/sameo/mfd-2.6: (97 commits) gpio/twl: Add DT support to gpio-twl4030 driver gpio/twl: Allocate irq_desc dynamically for SPARSE_IRQ support mfd: Detach twl6040 from the pmic mfd driver mfd: Replace twl-* pr_ macros by the dev_ equivalent and do various cleanups mfd: Micro-optimization on twl4030 IRQ handler mfd: Make twl4030 SIH SPARSE_IRQ capable mfd: Move twl-core IRQ allocation into twl[4030|6030]-irq files mfd: Remove references already defineid in header file from twl-core mfd: Remove unneeded header from twl-core mfd: Make twl-core not depend on pdata->irq_base/end ARM: OMAP2+: board-omap4-*: Do not use anymore TWL6030_IRQ_BASE in board files mfd: Return twl6030_mmc_card_detect IRQ for board setup Revert "mfd: Add platform data for MAX8997 haptic driver" mfd: Add support for TPS65090 mfd: Add some da9052-i2c section annotations mfd: Build rtc5t583 only if I2C config is selected to y. mfd: Add anatop mfd driver mfd: Fix compilation error in tps65910.h mfd: Add 8420 variant to db8500-prcmu mfd: Add 8520 PRCMU variant to db8500-prcmu ...
2012-03-28Remove all #inclusions of asm/system.hDavid Howells
Remove all #inclusions of asm/system.h preparatory to splitting and killing it. Performed with the following command: perl -p -i -e 's!^#\s*include\s*<asm/system[.]h>.*\n!!' `grep -Irl '^#\s*include\s*<asm/system[.]h>' *` Signed-off-by: David Howells <dhowells@redhat.com>
2012-03-27Merge branch 'platforms' of git://git.linaro.org/people/rmk/linux-armLinus Torvalds
Pull ARM platform updates from Russell King: "This covers platform stuff for platforms I have a direct interest in (iow, I have the hardware). Essentially: - as we no longer support any other Acorn platforms other than RiscPC anymore, we can collect all that code into mach-rpc. - convert Acorn expansion card stuff to use IRQ allocation functions, and get rid of NO_IRQ from there. - cleanups to the ebsa110 platform to move some private stuff out of its header files. - large amount of SA11x0 updates: - conversion of private DMA implementation to DMA engine support (this actually gives us greater flexibility in drivers over the old API.) - re-worked ucb1x00 updates - convert to genirq, remove sa11x0 dependencies, fix various minor issues - move platform specific sa11x0 framebuffer data into platform files in arch/arm instead of keeping this in the driver itself - update sa11x0 IrDA driver for DMA engine, and allow it to use DMA for SIR transmissions as well as FIR - rework sa1111 support for genirq, and irq allocation - fix sa1111 IRQ support so it works again - use sparse IRQ support After this, I have one more pull request remaining from my current set, which I think is going to be the most problematical as it generates 8 conflicts." Fixed up the trivial conflict in arch/arm/mach-rpc/Makefile as per Russell. * 'platforms' of git://git.linaro.org/people/rmk/linux-arm: (125 commits) ARM: 7343/1: sa11x0: convert to sparse IRQ ARM: 7342/2: sa1100: prepare for sparse irq conversion ARM: 7341/1: input: prepare jornada720 keyboard and ts for sa11x0 sparse irq ARM: 7340/1: rtc: sa1100: include mach/irqs.h instead of asm/irq.h ARM: sa11x0: remove unused DMA controller definitions ARM: sa11x0: remove old SoC private DMA driver USB: sa1111: add hcd .reset method USB: sa1111: add OHCI shutdown methods USB: sa1111: reorganize ohci-sa1111.c USB: sa1111: get rid of nasty printk(KERN_DEBUG "%s: ...", __FILE__) USB: sa1111: sparse and checkpatch cleanups ARM: sa11x0: don't static map sa1111 ARM: sa1111: use dev_err() rather than printk() ARM: sa1111: cleanup sub-device registration and unregistration ARM: sa1111: only setup DMA for DMA capable devices ARM: sa1111: register sa1111 devices with dmabounce in bus notifier ARM: sa1111: move USB interface register definitions to ohci-sa1111.c ARM: sa1111: move PCMCIA interface register definitions to sa1111_generic.c ARM: sa1111: move PS/2 interface register definitions to sa1111p2.c ARM: sa1111: delete unused physical GPIO register definitions ...
2012-03-27Merge tag 'boards' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-socLinus Torvalds
Pull "ARM: board specific updates" from Arnd Bergmann/Olof Johansson: "These changes are all specific to one board only. We're trying to keep the number of board files low, but generally board level updates are ok on platforms that are working on moving towards DT based probing, which will eventually lead to removing them. The board-ams-delta.c board file gets a conflict between the removal of ams_delta_config and the addition of a lot of other data. The Kconfig file has two changes in the same line, and in exynos, the power domain cleanup conflicts with the addition of the image sensor device. Signed-off-by: Arnd Bergmann <arnd@arndb.de> [olof: Amended a fix for a mismerge to board-omap4panda.c] Signed-off-by: Olof Johansson <olof@lixom.net>" Fixed up some fairly trivial conflicts manually. * tag 'boards' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (82 commits) i.MX35-PDK: Add Camera support ARM : mx35: 3ds-board: add framebuffer device pxa/hx4700: Remove pcmcia platform_device structure ARM: pxa/hx4700: Reduce sleep mode battery discharge by 35% ARM: pxa/hx4700: Remove unwanted request for GPIO105 ARM: EXYNOS: support Exynos4210-bus Devfreq driver on Nuri board ARM: EXYNOS: Register JPEG on nuri ARM: EXYNOS: Register JPEG on universal_c210 ARM: S5PV210: Enable JPEG on SMDKV210 ARM: S5PV210: Add JPEG board definition ARM: EXYNOS: Enable JPEG on Origen ARM: EXYNOS: Enable JPEG on SMDKV310 ARM: EXYNOS: Add __init attribute to universal_camera_init() ARM: EXYNOS: Add __init attribute to nuri_camera_init() ARM: S5PV210: Enable FIMC on SMDKC110 ARM: S5PV210: Enable FIMC on SMDKV210 ARM: S5PV210: Enable MFC on SMDKC110 ARM: S5PV210: Enable MFC on SMDKV210 ARM: EXYNOS: Enable G2D on SMDKV310 ARM: tegra: update defconfig ...
2012-03-27Merge tag 'cleanup' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-socLinus Torvalds
Pull "ARM: global cleanups" from Arnd Bergmann: "Quite a bit of code gets removed, and some stuff moved around, mostly the old samsung s3c24xx stuff. There should be no functional changes in this series otherwise. Some cleanups have dependencies on other arm-soc branches and will be sent in the second round. Signed-off-by: Arnd Bergmann <arnd@arndb.de>" Fixed up trivial conflicts mainly due to #include's being changes on both sides. * tag 'cleanup' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (121 commits) ep93xx: Remove unnecessary includes of ep93xx-regs.h ep93xx: Move EP93XX_SYSCON defines to SoC private header ep93xx: Move crunch code to mach-ep93xx directory ep93xx: Make syscon access functions private to SoC ep93xx: Configure GPIO ports in core code ep93xx: Move peripheral defines to local SoC header ep93xx: Convert the watchdog driver into a platform device. ep93xx: Use ioremap for backlight driver ep93xx: Move GPIO defines to gpio-ep93xx.h ep93xx: Don't use system controller defines in audio drivers ep93xx: Move PHYS_BASE defines to local SoC header file ARM: EXYNOS: Add clock register addresses for EXYNOS4X12 bus devfreq driver ARM: EXYNOS: add clock registers for exynos4x12-cpufreq PM / devfreq: update the name of EXYNOS clock registers that were omitted PM / devfreq: update the name of EXYNOS clock register ARM: EXYNOS: change the prefix S5P_ to EXYNOS4_ for clock ARM: EXYNOS: use static declaration on regarding clock ARM: EXYNOS: replace clock.c for other new EXYNOS SoCs ARM: OMAP2+: Fix build error after merge ARM: S3C24XX: remove call to s3c24xx_setup_clocks ...
2012-03-23usermodehelper: use UMH_WAIT_PROC consistentlyOleg Nesterov
A few call_usermodehelper() callers use the hardcoded constant instead of the proper UMH_WAIT_PROC, fix them. Reported-by: Tetsuo Handa <penguin-kernel@i-love.sakura.ne.jp> Signed-off-by: Oleg Nesterov <oleg@redhat.com> Cc: Lars Ellenberg <drbd-dev@lists.linbit.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Michal Januszewski <spock@gentoo.org> Cc: Florian Tobias Schandinat <FlorianSchandinat@gmx.de> Cc: Kentaro Takeda <takedakn@nttdata.co.jp> Cc: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp> Cc: James Morris <jmorris@namei.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-03-23backlight: fix ot200_bl buildRandy Dunlap
Fix build error when GPIO_CS5535 is not enabled: drivers/built-in.o: In function `ot200_backlight_probe': ot200_bl.c:(.text+0x205bf): undefined reference to `cs5535_gpio_set' ot200_bl.c:(.text+0x205d1): undefined reference to `cs5535_gpio_set' Signed-off-by: Randy Dunlap <rdunlap@xenotime.net> Cc: Christian Gmeiner <christian.gmeiner@gmail.com> Cc: Richard Purdie <rpurdie@rpsys.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-03-23backlight: convert platform_lcd to dev_pm_opsJingoo Han
Instead of using legacy suspend/resume methods, using newer dev_pm_ops structure allows better control over power management. Signed-off-by: Jingoo Han <jg1.han@samsung.com> Cc: Richard Purdie <rpurdie@rpsys.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-03-23backlight: add support for Pandora backlightGrazvydas Ignotas
Add support for pandora (openpandora.org) backlight. It might look like all this could be done using pwm_bl.c instead, but there is a need of special programming sequence when turning on the LED driver chip or else it will misbehave. Doing this using pwm_bl.c would require to use some register programming and pwm functions from platform code, and ARM maintainers are allergic to driver-like code in /arch/arm nowadays. The PMIC PWM driver is currently missing too, so pwm_bl.c can't be used anyway. Signed-off-by: Grazvydas Ignotas <notasas@gmail.com> Cc: Richard Purdie <rpurdie@rpsys.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-03-23backlight: add driver for Bachmann's ot200Christian Gmeiner
Add backlight driver for Bachmann's ot200 visualisation device. The driver uses MFGPT 7 of CS5535 silicon to regulate the backlight. [akpm@linux-foundation.org: remove redundant test of `brightness'] Signed-off-by: Christian Gmeiner <christian.gmeiner@gmail.com> Cc: Lars-Peter Clausen <lars@metafoo.de> Cc: Andres Salomon <dilinger@queued.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-03-23backlight: new backlight driver for LP855x devicesKim, Milo
THis driver supports TI LP8550/LP8551/LP8552/LP8553/LP8556 backlight devices. The brightness can be controlled by the I2C or PWM input. The lp855x driver provides both modes. For the PWM control, pwm-specific functions can be defined in the platform data. And some information can be read via the sysfs(lp855x device attributes). For details, please refer to Documentation/backlight/lp855x-driver.txt. [axel.lin@gmail.com: add missing mutex_unlock in lp855x_read_byte() error path] [axel.lin@gmail.com: check platform data in lp855x_probe()] [axel.lin@gmail.com: small cleanups] [dan.carpenter@oracle.com: silence a compiler warning] [axel.lin@gmail.com: use id->driver_data to differentiate lp855x chips] [akpm@linux-foundation.org: simplify boolean return expression] Signed-off-by: Milo(Woogyom) Kim <milo.kim@ti.com> Signed-off-by: Axel Lin <axel.lin@gmail.com> Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Cc: Richard Purdie <rpurdie@rpsys.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-03-23drivers/video/backlight/adp5520_bl.c: use devm_ functionsJulia Lawall
The various devm_ functions allocate memory that is released when a driver detaches. This patch uses these functions for data that is allocated in the probe function of a platform device and is only freed in the remove function. Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr> Cc: Dimitris Papastamos <dp@opensource.wolfsonmicro.com> Cc: Richard Purdie <rpurdie@rpsys.net> Cc: Florian Tobias Schandinat <FlorianSchandinat@gmx.de> Cc: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Michael Hennerich <michael.hennerich@analog.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-03-23drivers/video/backlight: use devm_ functionsJulia Lawall
The various devm_ functions allocate memory that is released when a driver detaches. This patch uses these functions for data that is allocated in the probe function of a platform device and is only freed in the remove function. Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr> Cc: Dimitris Papastamos <dp@opensource.wolfsonmicro.com> Cc: Richard Purdie <rpurdie@rpsys.net> Cc: Florian Tobias Schandinat <FlorianSchandinat@gmx.de> Cc: Mark Brown <broonie@opensource.wolfsonmicro.com> Cc: Michael Hennerich <michael.hennerich@analog.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-03-23drivers/video/backlight/wm831x_bl.c: use devm_ functionsJulia Lawall
The various devm_ functions allocate memory that is released when a driver detaches. This patch uses these functions for data that is allocated in the probe function of a platform device and is only freed in the remove function. Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr> Cc: Dimitris Papastamos <dp@opensource.wolfsonmicro.com> Cc: Richard Purdie <rpurdie@rpsys.net> Cc: Florian Tobias Schandinat <FlorianSchandinat@gmx.de> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Cc: Michael Hennerich <michael.hennerich@analog.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-03-23backlight: convert backlight spi drivers to module_spi_driverAxel Lin
Factor out some boilerplate code for spi driver registration into module_spi_driver. Signed-off-by: Axel Lin <axel.lin@gmail.com> Acked-by: Jingoo Han <jg1.han@samsung.com> Cc: Eric Miao <eric.y.miao@gmail.com> Acked-by: Alberto Panizzo <alberto@amarulasolutions.com> Cc: Donghwa Lee <dh09.lee@samsung.com> Acked-by: Marek Vasut <marek.vasut@gmail.com> Cc: Haavard Skinnemoen <hskinnemoen@atmel.com> Cc: InKi Dae <inki.dae@samsung.com> Cc: Dmitry Baryshkov <dbaryshkov@gmail.com> Cc: Ben Dooks <ben-linux@fluff.org> Cc: Richard Purdie <rpurdie@rpsys.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-03-23backlight: convert backlight i2c drivers to module_i2c_driverAxel Lin
Factor out some boilerplate code for i2c driver registration into module_i2c_driver. Signed-off-by: Axel Lin <axel.lin@gmail.com> Cc: Michael Hennerich <hennerich@blackfin.uclinux.org> Cc: Dmitry Baryshkov <dbaryshkov@gmail.com> Cc: Richard Purdie <rpurdie@rpsys.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-03-22Merge tag 'fbdev-updates-for-3.4' of git://github.com/schandinat/linux-2.6Linus Torvalds
Pull fbdev updates for 3.4 from Florian Tobias Schandinat: - drivers for Samsung Exynos MIPI DSI and display port - i740fb to support those old Intel chips - large updates to OMAP, viafb and sh_mobile_lcdcfb - some updates to s3c-fb and udlfb, few patches to others Fix up conflicts in drivers/video/udlfb.c due to Key Sievers' fix making it in twice. * tag 'fbdev-updates-for-3.4' of git://github.com/schandinat/linux-2.6: (156 commits) Revert "video:uvesafb: Fix oops that uvesafb try to execute NX-protected page" OMAPDSS: register dss drivers in module init video: pxafb: add clk_prepare/clk_unprepare calls fbdev: bfin_adv7393fb: Drop needless include fbdev: sh_mipi_dsi: add extra phyctrl for sh_mipi_dsi_info fbdev: remove dependency of FB_SH_MOBILE_MERAM from FB_SH_MOBILE_LCDC Revert "MAINTAINERS: add entry for exynos mipi display drivers" fbdev: da8xx: add support for SP10Q010 display fbdev: da8xx:: fix reporting of the display timing info drivers/video/pvr2fb.c: ensure arguments to request_irq and free_irq are compatible OMAPDSS: APPLY: fix clearing shadow dirty flag with manual update fbdev: sh_mobile_meram: Implement system suspend/resume fbdev: sh_mobile_meram: Remove unneeded sanity checks fbdev: sh_mobile_meram: Don't perform update in register operation arm: mach-shmobile: Constify sh_mobile_meram_cfg structures fbdev: sh_mobile_lcdc: Don't store copy of platform data fbdev: sh_mobile_meram: Remove unused sh_mobile_meram_icb_cfg fields arm: mach-shmobile: Don't set MERAM ICB numbers in platform data fbdev: sh_mobile_meram: Allocate ICBs automatically fbdev: sh_mobile_meram: Use genalloc to manage MERAM allocation ...
2012-03-22Merge tag 'stable/for-linus-3.4-tag' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/konrad/xen Pull xen updates from Konrad Rzeszutek Wilk: "which has three neat features: - PV multiconsole support, so that there can be hvc1, hvc2, etc; This can be used in HVM and in PV mode. - P-state and C-state power management driver that uploads said power management data to the hypervisor. It also inhibits cpufreq scaling drivers to load so that only the hypervisor can make power management decisions - fixing a weird perf bug. There is one thing in the Kconfig that you won't like: "default y if (X86_ACPI_CPUFREQ = y || X86_POWERNOW_K8 = y)" (note, that it all depends on CONFIG_XEN which depends on CONFIG_PARAVIRT which by default is off). I've a fix to convert that boolean expression into "default m" which I am going to post after the cpufreq git pull - as the two patches to make this work depend on a fix in Dave Jones's tree. - Function Level Reset (FLR) support in the Xen PCI backend. Fixes: - Kconfig dependencies for Xen PV keyboard and video - Compile warnings and constify fixes - Change over to use percpu_xxx instead of this_cpu_xxx" Fix up trivial conflicts in drivers/tty/hvc/hvc_xen.c due to changes to a removed commit. * tag 'stable/for-linus-3.4-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/konrad/xen: xen kconfig: relax INPUT_XEN_KBDDEV_FRONTEND deps xen/acpi-processor: C and P-state driver that uploads said data to hypervisor. xen: constify all instances of "struct attribute_group" xen/xenbus: ignore console/0 hvc_xen: introduce HVC_XEN_FRONTEND hvc_xen: implement multiconsole support hvc_xen: support PV on HVM consoles xenbus: don't free other end details too early xen/enlighten: Expose MWAIT and MWAIT_LEAF if hypervisor OKs it. xen/setup/pm/acpi: Remove the call to boot_option_idle_override. xenbus: address compiler warnings xen: use this_cpu_xxx replace percpu_xxx funcs xen/pciback: Support pci_reset_function, aka FLR or D3 support. pci: Introduce __pci_reset_function_locked to be used when holding device_lock. xen: Utilize the restore_msi_irqs hook.
2012-03-22Merge branch 'drm-next' of git://people.freedesktop.org/~airlied/linuxLinus Torvalds
Pull drm main changes from Dave Airlie: "This is the main drm pull request, I'm probably going to send two more smaller ones, will explain below. This contains a patch that is also in the fbdev tree, but it should be the same patch, it added an API for hot unplugging framebuffer devices, and I need that API for a new driver. It also contains some changes to the i2c tree which Jean has acked, and one change to moorestown platform stuff in x86. Highlights: - new drivers: UDL driver for USB displaylink devices, kms only, should support correct hotplug operations. - core: i2c speedups + better hotplug support, EDID overriding via firmware interface - allows user to load a firmware for a broken monitor/kvm from userspace, it even has documentation for it. - exynos: new HDMI audio + hdmi 1.4 + virtual output driver - gma500: code cleanup - radeon: cleanups, CS optimisations, streamout support and pageflip fix - nouveau: NVD9 displayport support + more reclocking work - i915: re-enabling GMBUS, finish gpu patch (might help hibernation who knows), missed irq fixes, stencil tiling fixes, interlaced support, aliasesd PPGTT support for SNB/IVB, swizzling for SNB/IVB, semaphore fixes As well as the usual bunch of cleanups and fixes all over the place. I've got two things I'd like to merge a bit later: a) AMD support for all their new radeonhd 7000 series GPU and APUs. AMD dropped this a bit late due to insane internal review processes, (please AMD just follow Intel and let open source guys ship stuff early) however I don't want to penalise people who own this hardware (since its been on sale for 3-4 months and GPU hw doesn't exactly have a lifetime in years) and consign them to using closed drivers for longer than necessary. The changes are well contained and just plug into the driver new gpu functionality so they should be fairly regression proof. I just want to give them a bit of a run on the hw AMD kindly sent me. b) drm prime/dma-buf interface code. This is just infrastructure code to expose the dma-buf stuff to drm drivers and to userspace. I'm not planning on pushing any driver support in this cycle (except maybe exynos), but I'd like to get the infrastructure code in so for the next cycle I can start getting the driver support into the individual drivers. We have started driver support for i915, nouveau and udl along with I think exynos and omap in staging. However this code relies on the dma-buf tree being pulled into your tree first since it needs the latest interfaces from that tree. I'll push to get that tree sent asap. (oh and any warnings you see in i915 are gcc's fault from what anyone can see)." Fix up trivial conflicts in arch/x86/platform/mrst/mrst.c due to the new msic_thermal_platform_data() thermal function being added next to the tc35876x_platform_data() i2c device function.. * 'drm-next' of git://people.freedesktop.org/~airlied/linux: (326 commits) drm/i915: use DDC_ADDR instead of hard-coding it drm/radeon: use DDC_ADDR instead of hard-coding it drm: remove unneeded redefinition of DDC_ADDR drm/exynos: added virtual display driver. drm: allow loading an EDID as firmware to override broken monitor drm/exynos: enable hdmi audio feature drm/exynos: add default pixel format for plane drm/exynos: cleanup exynos_hdmi.h drm/exynos: add is_local member in exynos_drm_subdrv struct drm/exynos: add subdrv open/close functions drm/exynos: remove module of exynos drm subdrv drm/exynos: release pending pageflip events when closed drm/exynos: added new funtion to get/put dma address. drm/exynos: update gem and buffer framework. drm/exynos: added mode_fixup feature and code clean. drm/exynos: add HDMI version 1.4 support drm/exynos: remove exynos_mixer.h gma500: Fix mmap frambuffer drm/radeon: Drop radeon_gem_object_(un)pin. drm/radeon: Restrict offset for legacy display engine. ...
2012-03-22apple_bl: Add register/unregister functionsSeth Forshee
Add functions to allow other modules to enable or disable apple_bl. This will be used by the gmux driver to disable apple_bl when the gmux is present, as it is a better and more reliable option for brightness control. Signed-off-by: Seth Forshee <seth.forshee@canonical.com> Signed-off-by: Matthew Garrett <mjg@redhat.com>
2012-03-21dmaengine/dma_slave: introduce inline wrappersAlexandre Bounine
Add inline wrappers for device_prep_slave_sg() and device_prep_dma_cyclic() interfaces to hide new parameter from current users of affected interfaces. Convert current users to use new wrappers instead of direct calls. Suggested by Russell King [https://lkml.org/lkml/2012/2/3/269]. Signed-off-by: Alexandre Bounine <alexandre.bounine@idt.com> Signed-off-by: Vinod Koul <vinod.koul@linux.intel.com>
2012-03-21Revert "video:uvesafb: Fix oops that uvesafb try to execute NX-protected page"Florian Tobias Schandinat
This reverts commit ec0d22e4d563e7cce9f6678e2000900755c2989d. This patch requires exporting 'pcibios_enabled' to avoid breaking modular uvesafb builds. As this gets some opposition by Alan Cox it needs more discussion, revert the patch for now. Signed-off-by: Florian Tobias Schandinat <FlorianSchandinat@gmx.de>
2012-03-21OMAPDSS: register dss drivers in module initTomi Valkeinen
We do the dss driver registration in a rather strange way: we have the higher level omapdss driver, and we use that driver's probe function to register the drivers for the rest of the dss devices. There doesn't seem to be any reason for that, and additionally the soon-to-be-merged patch "ARM: OMAP: omap_device: remove omap_device_parent" will break omapdss initialization with the current registration model. This patch changes the registration for all drivers to happen at the same place, in the init of the module. Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com> Signed-off-by: Florian Tobias Schandinat <FlorianSchandinat@gmx.de>
2012-03-21video: pxafb: add clk_prepare/clk_unprepare callsPhilipp Zabel
This patch adds clk_prepare/clk_unprepare calls to the pxafb driver by using the helper functions clk_prepare_enable and clk_disable_unprepare. Signed-off-by: Philipp Zabel <philipp.zabel@gmail.com> Cc: Haojian Zhuang <haojian.zhuang@marvell.com> Cc: Eric Miao <eric.y.miao@gmail.com> Signed-off-by: Florian Tobias Schandinat <FlorianSchandinat@gmx.de>
2012-03-21fbdev: bfin_adv7393fb: Drop needless includeJean Delvare
Kernel drivers don't need <linux/i2c-dev.h>. Signed-off-by: Jean Delvare <khali@linux-fr.org> Cc: Michael Hennerich <michael.hennerich@analog.com> Signed-off-by: Florian Tobias Schandinat <FlorianSchandinat@gmx.de>
2012-03-21fbdev: sh_mipi_dsi: add extra phyctrl for sh_mipi_dsi_infoKuninori Morimoto
sh_mipi uses some clocks, but the method of setup depends on CPU. Current SuperH (like sh73a0) can control all of these clocks by CPG (Clock Pulse Generator). It means we can control it by clock framework only. But on sh7372, it needs CPG settings AND sh_mipi PHYCTRL::PLLDS, and only sh7372 has PHYCTRL::PLLDS. But on current sh_mipi driver, PHYCTRL::PLLDS of sh7372 was overwrote since the callback timing of clock setting was changed by c2658b70f06108361aa5024798f9c1bf47c73374 (fbdev: sh_mipi_dsi: fixup setup timing of sh_mipi_setup()). To solve this issue, this patch adds extra .phyctrl. This patch adds detail explanation for unclear mipi settings and fixup wrong PHYCTRL::PLLDS value for ap4evb (0xb -> 0x6). Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Florian Tobias Schandinat <FlorianSchandinat@gmx.de>
2012-03-21fbdev: remove dependency of FB_SH_MOBILE_MERAM from FB_SH_MOBILE_LCDCKuninori Morimoto
MERAM can be used for other IP blocks as well in the future. It doesn't necessarily mean that the MERAM driver depends on the LCDC. This patch corrects dependency. Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Florian Tobias Schandinat <FlorianSchandinat@gmx.de>
2012-03-20Merge commit 'v3.3' into fbdev-nextFlorian Tobias Schandinat
2012-03-20Merge branch 'for-3.4' of git://gitorious.org/linux-omap-dss2/linux into ↵Florian Tobias Schandinat
fbdev-next