summaryrefslogtreecommitdiff
path: root/drivers/watchdog
AgeCommit message (Collapse)Author
2009-08-07Merge master.kernel.org:/home/rmk/linux-2.6-armLinus Torvalds
* master.kernel.org:/home/rmk/linux-2.6-arm: (30 commits) ARM: 5639/1: arm: clkdev.c should include <linux/clk.h> ARM: 5638/1: arch/arm/kernel/signal.c: use correct address space for CRUNCH ARM: 5637/1: [KS8695] Don't reference CLOCK_TICK_RATE in drivers ARM: S3C64XX: serial: Fix section mismatch warning ARM: S3C24XX: serial: Fix section mismatch warnings ARM: S3C: PWM fix for low duty cycle ARM: 5597/1: [PCI] reset all internal hardware prior PCI initialization ARM: 5627/1: Fix restoring of lr at the end of mcount ARM: 5624/1: Document cache aliasing region S3C64XX: Fix ARMCLK configuration S3C64XX: Fix get_rate() for ARMCLK S3C24XX: GPIO: Fix pin range check in s3c_gpiolib_getchip mx3 defconfig update mx27 defconfig update ARM: 5623/1: Treo680: ir shutdown typo fix ARM: includecheck fix: plat-stmp3xxx/pinmux.c ARM: includecheck fix: plat-s3c64xx/pm.c ARM: includecheck fix: mach-omap2/mcbsp.c ARM: includecheck fix: mach-omap1/mcbsp.c ARM: includecheck fix: board-sffsdr.c ...
2009-08-05ARM: 5637/1: [KS8695] Don't reference CLOCK_TICK_RATE in driversAndrew Victor
Stop referencing CLOCK_TICK_RATE in the KS8695 drivers, rather refer to a KS8695_CLOCK_RATE. Issue pointed out by Russell King on arm-linux-kernel mailing list. Signed-off-by: Andrew Victor <linux@maxim.org.za> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2009-08-02[WATCHDOG] Fix COH 901 327 watchdog enablementLinus Walleij
Since the COH 901 327 found in U300 is clocked at 32 kHz we need to wait for the interrupt clearing flag to propagate through hardware in order not to accidentally fire off any interrupts when we enable them. Signed-off-by: Linus Walleij <linus.walleij@stericsson.com> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2009-07-18Merge master.kernel.org:/home/rmk/linux-2.6-armLinus Torvalds
* master.kernel.org:/home/rmk/linux-2.6-arm: ARM: Realview & Versatile: Fix i2c_board_info definitions [ARM] 5608/1: Updated U300 defconfig [ARM] 5606/1: Fix ep93xx watchdog driver headers [ARM] 5594/1: Correct U300 VIC init PM setting [ARM] 5595/1: ep93xx: missing header in dma-m2p.c [ARM] Kirkwood: Correct header define [ARM] pxa: fix ULPI_{DIR,NXT,STP} MFP defines backlight: fix pwm_bl.c to notify platform code when suspending [ARM] pxa: use kzalloc() in pxa_init_gpio_chip() [ARM] pxa: correct I2CPWR clock for pxa3xx pxamci: correct DMA flow control ARM: add support for the EET board, based on the i.MX31 pcm037 module pcm037: add MT9T031 camera support Armadillo 500 add NAND flash device support (resend). ARM MXC: Armadillo 500 add NOR flash device support (resend). mx31: remove duplicated #include
2009-07-17[ARM] 5606/1: Fix ep93xx watchdog driver headersRyan Mallon
Fix a number of build errors in the ep93xx watchdog driver due to missing io.h Signed-off-by: Ryan Mallon <ryan@bluewatersys.com> Acked-by: H Hartley Sweeten <hsweeten@visionengravers.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2009-07-09[WATCHDOG] w83627hf_wdt.c: add support for the W83627EHF supportSlobodan Tomić
Add support for the W83627EHF/EF and W83627EHG/EG chipsets. Signed-off-by: Slobodan Tomić <stomic@gmail.com> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2009-07-09[WATCHDOG] SA1100 watchdog maximum timeoutRaphael Assenat
This patch replaces the hardcoded 255 seconds limit for a real limit based on oscr_freq. Also, the 'firmware_version' field is changed to '1' to allow the user space application to easily detect that this driver supports a higher maximum timeout. Signed-off-by: Raphael Assenat <raph@8D.com> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2009-07-09[WATCHDOG] w83697ug, fix lock imbalanceJiri Slaby
Don't forget to unlock io_lock when w83697ug_select_wd_register fails in wdt_ctrl. Signed-off-by: Jiri Slaby <jirislaby@gmail.com> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2009-07-09[WATCHDOG] drivers/watchdog/bcm47xx_wdt.c: Remove unnecessary semicolonsJoe Perches
Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2009-06-26powerpc/rtas: Fix watchdog driver temperature read functionalityAdrian Reber
Using the RTAS watchdog driver to read out the temperature crashes on a PXCAB: Unable to handle kernel paging request for data at address 0xfe347b50 Faulting instruction address: 0xc00000000001af64 Oops: Kernel access of bad area, sig: 11 [#1] The wrong usage of "(void *)__pa(&temperature)" in rtas_call() is removed by using the function rtas_get_sensor() which does the right thing. Signed-off-by: Adrian Reber <adrian@lisas.de> Acked-by: Utz Bacher <utz.bacher@de.ibm.com> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2009-06-23[WATCHDOG] wdt_pci.c: remove #ifdef CONFIG_WDT_501_PCIWim Van Sebroeck
Change the wdt_pci.c watchdog driver so that the code is the same for both the PCI-WDT500 as the PCI-WDT501 card. The selection of the card is now being done via the module parameter: 'type' instead of the config option CONFIG_WDT_501_PCI. Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2009-06-23[WATCHDOG] hpwdt: Add NMI priority optionTom Mingarelli
Add a priority option so that the user can choose if we do the NMI first or last. Signed-off-by: Thomas Mingarelli <thomas.mingarelli@hp.com> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2009-06-23[WATCHDOG] OMAP fixes: enable clock in probe, trigger timer reloadUlrik Bech Hald
This patch contains two fixes: 1)In omap_wdt_probe() the watchdog is reset and disabled. This requires register access and the clks needs to be enabled temporarily 2)In omap_wdt_open() the timer register needs to be reloaded to trigger a new timer value (the default of 60s) Tested on OMAP34xx platform (Zoom1) Reviewed-by: Kevin Hilman <khilman@ti.deeprootsystems.com> Signed-off-by: Ulrik Bech Hald <ubh@ti.com> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2009-06-20[WATCHDOG] add bcm47xx watchdog drivermatthieu castet
This add watchdog driver for broadcom 47xx device. It uses the ssb subsytem to access embeded watchdog device. Because the watchdog timeout is very short (about 2s), a soft timer is used to increase the watchdog period. Note : A patch for exporting the ssb_watchdog_timer_set will be submitted on next linux-mips merge. Without this patch it can't be build as a module. Signed-off-by: Aleksandar Radovanovic <biblbroks@sezampro.rs> Signed-off-by: Matthieu CASTET <castet.matthieu@free.fr> Tested-by: Florian Fainelli <florian@openwrt.org> Cc: Ralf Baechle <ralf@linux-mips.org> Signed-off-by: Wim Van Sebroeck <wim@iguana.be> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2009-06-20[WATCHDOG] Freescale STMP: watchdog driverdmitry pervushin
Add watchdog timer support for Freescale STMP3xxx boards Signed-off-by: Vitaly Wool <vital@embeddedalley.com> Signed-off-by: Dmitry Pervushin <dpervushin@embeddedalley.com> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2009-06-20[WATCHDOG] twl4030 watchdog driverTimo Kokkonen
Implementation of twl4030 watchdog driver. Signed-off-by: Timo Kokkonen <timo.t.kokkonen@nokia.com> Signed-off-by: Atal Shargorodsky <ext-atal.shargorodsky@nokia.com> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2009-06-20[WATCHDOG] U300 COH 901 327 watchdog driverLinus Walleij
This patch adds support for the U300 COH 901 327 watchdog for the U300 platform recently added to RMK:s ARM tree. Signed-off-by: Linus Walleij <linus.walleij@stericsson.com> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2009-06-20[WATCHDOG] Add pnx833x_wdtDaniel Laird
Add support for PNX833x watchdog timer. Signed-off-by: Daniel Laird <daniel.j.laird@nxp.com> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2009-06-19Merge branch 'merge' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc * 'merge' of git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc: (35 commits) powerpc/5121: make clock debug output more readable powerpc/5xxx: Add common mpc5xxx_get_bus_frequency() function powerpc/5200: Update pcm030.dts to add i2c eeprom and delete cruft powerpc/5200: convert mpc52xx_psc_spi to use cs_control callback fbdev/xilinxfb: Fix improper casting and tighen up probe path usb/ps3: Add missing annotations powerpc: Add memory clobber to mtspr() powerpc: Fix invalid construct in our CPU selection Kconfig ps3rom: Use ps3_system_bus_[gs]et_drvdata() instead of direct access powerpc: Add configurable -Werror for arch/powerpc of_serial: Add UPF_FIXED_TYPE flag drivers/hvc: Add missing __devexit_p() net/ps3: gelic - Add missing annotations powerpc: Introduce macro spin_event_timeout() powerpc/warp: Fix ISA_DMA_THRESHOLD default powerpc/bootwrapper: Custom build options for XPedite52xx targets powerpc/85xx: Add defconfig for X-ES MPC85xx boards powerpc/85xx: Add dts files for X-ES MPC85xx boards powerpc/85xx: Add platform support for X-ES MPC85xx boards 83xx: add support for the kmeter1 board. ...
2009-06-18[WATCHDOG] hpwdt: Add NMI sourcingThomas Mingarelli
Add NMI sourcing functionality (Can only be active if nmi_watchdog is inactive). Signed-off-by: Thomas Mingarelli <thomas.mingarelli@hp.com> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2009-06-18[WATCHDOG] iTCO_wdt: Fix ICH7+ reboot issue.Wim Van Sebroeck
Bugzilla: 9868 & 10195. There seems to be a bug into the SMM code that handles TCO Timeout SMI. Andriy Gapon found that the code on his DG33TL system does the following: > The handler is quite simple - it tests value in TCO1_CNT against 0x800, i.e. > checks TCO_TMR_HLT. If the bit is set the handler goes into an infinite loop, > apparently to allow the second timeout and reboot. Otherwise it simply clears > TIMEOUT bit in TCO1_STS and that's it. > So the logic seems to be reversed, because it is hard to see how TIMEOUT can > get set to 1 and SMI generated when TCO_TMR_HLT is set (other than a > transitional effect). The only trick we have is to bypass the SMM code by turning of the generation of the SMI#. The trick can only be enabled by setting the vendorsupport module parameter to 911. This trick doesn't work well on laptop's. Note: this is a dirty hack. Please handle with care. The only real fix is that the bug in the SMM bios code get's fixed. Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2009-06-18[WATCHDOG] iTCO_wdt: fix memory corruption when RCBA is disabled by hardwareDenis V. Lunev
According to 9.1.33 on p.343 of ICH8.pdf RCBA can be disabled by hardware if bit 0 of RCBA register is not set. Perform correct check for this to prevent memory corruption under some virtual machines where this feature is disabled. Signed-off-by: Denis V. Lunev <den@openvz.org> CC: Vasily Averin <vvs@openvz.org> Signed-off-by: Wim Van Sebroeck <wim@iguana.be> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2009-06-18[WATCHDOG] Correct WDIOF_MAGICCLOSE flagWim Van Sebroeck
Make sure that when the WDIOF_MAGICCLOSE flag is set we also support the magic-close feature... Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2009-06-18[WATCHDOG] move platform probe and remove function to devinit and devexitWim Van Sebroeck
A pointer to probe and remove functions is passed to the core via platform_driver_register and so the function must not disappear when the .init sections are discarded. Otherwise (if also having HOTPLUG=y) unbinding and binding a device to the driver via sysfs will result in an oops as does a device being registered late. Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2009-06-18[WATCHDOG] Some more general cleanupWim Van Sebroeck
Clean-up the watchdog drivers so that checkpatch.pl get's happy... Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2009-06-18[WATCHDOG] iTCO_wdt: Cleanup codeWim Van Sebroeck
Clean-up the iTCO_wdt code so that checkpatch.pl get's happy... Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2009-06-17powerpc/5xxx: Add common mpc5xxx_get_bus_frequency() functionWolfgang Denk
So far, MPC512x used mpc512x_find_ips_freq() to get the bus frequency, while MPC52xx used mpc52xx_find_ipb_freq(). Despite the different clock names (IPS vs. IPB) the code was identical. Use common code for both processor families. Signed-off-by: Wolfgang Denk <wd@denx.de> Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2009-06-14Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial: (31 commits) trivial: remove the trivial patch monkey's name from SubmittingPatches trivial: Fix a typo in comment of addrconf_dad_start() trivial: usb: fix missing space typo in doc trivial: pci hotplug: adding __init/__exit macros to sgi_hotplug trivial: Remove the hyphen from git commands trivial: fix ETIMEOUT -> ETIMEDOUT typos trivial: Kconfig: .ko is normally not included in module names trivial: SubmittingPatches: fix typo trivial: Documentation/dell_rbu.txt: fix typos trivial: Fix Pavel's address in MAINTAINERS trivial: ftrace:fix description of trace directory trivial: unnecessary (void*) cast removal in sound/oss/msnd.c trivial: input/misc: Fix typo in Kconfig trivial: fix grammo in bus_for_each_dev() kerneldoc trivial: rbtree.txt: fix rb_entry() parameters in sample code trivial: spelling fix in ppc code comments trivial: fix typo in bio_alloc kernel doc trivial: Documentation/rbtree.txt: cleanup kerneldoc of rbtree.txt trivial: Miscellaneous documentation typo fixes trivial: fix typo milisecond/millisecond for documentation and source comments. ...
2009-06-12trivial: Kconfig: .ko is normally not included in module namesPavel Machek
.ko is normally not included in Kconfig help, make it consistent. Signed-off-by: Pavel Machek <pavel@ucw.cz> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2009-06-12trivial: typo (en|dis|avail|remove)bale -> (en|dis|avail|remove)ableThadeu Lima de Souza Cascardo
Signed-off-by: Thadeu Lima de Souza Cascardo <cascardo@holoscopio.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2009-06-08[ARM] Orion/Kirkwood: rename orion5x_wdt to orion_wdtNicolas Pitre
The Orion watchdog driver is also used on Kirkwood. Convention is to use orion5x for stuff specific to 88F5xxx Orion chips and simply "orion" for shared stuff across SoCs including Kirkwood. Signed-off-by: Nicolas Pitre <nico@marvell.com>
2009-06-08[ARM] Kirkwood: Add the watchdog timer as a platform device.Thomas Reitmayr
The Kirkwood architecture uses the same watchdog device as the Orion architecture. This patch adds orion5x_wdt as a platform device for Kirkwood. Signed-off-by: Thomas Reitmayr <treitmayr@devbase.at> Tested-by: Martin Michlmayr <tbm@cyrius.com> Signed-off-by: Nicolas Pitre <nico@marvell.com>
2009-06-08[ARM] orion5x: Change names of defines for Reset-Out-Mask registerThomas Reitmayr
The name of the define for the Reset-Out-Mask register as well as its bit for the watchdog reset are changed to match the names used for Kirkwood (which in turn match the processor specification more closely). There is no functional change. This patch prepares for adding orion5x_wdt as a platform device to Kirkwood. Signed-off-by: Thomas Reitmayr <treitmayr@devbase.at> Signed-off-by: Nicolas Pitre <nico@marvell.com>
2009-04-23[ARM] 5460/1: Orion: reduce namespace pollutionNicolas Pitre
Symbols like SOFT_RESET are way too generic to be exported at large. To avoid this, let's move the mbus bridge register defines into a separate file and include it where needed. This affects mach-kirkwood, mach-loki, mach-mv78xx0 and mach-orion5x simultaneously as they all share code in plat-orion which relies on those defines. Some other defines have been moved to narrower scopes, or simply deleted when they had no user. This fixes compilation problem with mpt2sas on the above listed platforms. Signed-off-by: Nicolas Pitre <nico@marvell.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2009-04-08[WATCHDOG] omap_wdt.c: move probe function to .devinit.textUwe Kleine-König
A pointer to omap_wdt_probe is passed to the core via platform_driver_register and so the function must not disappear when the .init sections are discarded. Otherwise (if also having HOTPLUG=y) unbinding and binding a device to the driver via sysfs will result in an oops as does a device being registered late. An alternative to this patch is using platform_driver_probe instead of platform_driver_register plus removing the pointer to the probe function from the struct platform_driver. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Cc: Alan Cox <alan@redhat.com> Cc: Felipe Balbi <felipe.balbi@nokia.com> Cc: George G. Davis <gdavis@mvista.com> Cc: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2009-04-08[WATCHDOG] ks8695_wdt.c: move probe function to .devinit.textUwe Kleine-König
A pointer to ks8695wdt_probe is passed to the core via platform_driver_register and so the function must not disappear when the .init sections are discarded. Otherwise (if also having HOTPLUG=y) unbinding and binding a device to the driver via sysfs will result in an oops as does a device being registered late. An alternative to this patch is using platform_driver_probe instead of platform_driver_register plus removing the pointer to the probe function from the struct platform_driver. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Cc: Alexey Dobriyan <adobriyan@gmail.com> Cc: Alan Cox <alan@redhat.com> Cc: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2009-04-08[WATCHDOG] at91rm9200_wdt.c: move probe function to .devinit.textUwe Kleine-König
A pointer to at91wdt_probe is passed to the core via platform_driver_register and so the function must not disappear when the .init sections are discarded. Otherwise (if also having HOTPLUG=y) unbinding and binding a device to the driver via sysfs will result in an oops as does a device being registered late. An alternative to this patch is using platform_driver_probe instead of platform_driver_register plus removing the pointer to the probe function from the struct platform_driver. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Cc: Andrew Victor <linux@maxim.org.za> Cc: Russell King <rmk+kernel@arm.linux.org.uk> Cc: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> Cc: Ilpo Jarvinen <ilpo.jarvinen@helsinki.fi> Cc: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2009-04-08[WATCHDOG] remove ARM26 sectionsPaulius Zaleckas
Removes ARM26 sections from Kconfig and Makefile, because ARM26 is long gone. Signed-off-by: Paulius Zaleckas <paulius.zaleckas@teltonika.lt> Acked-by: Russell King <rmk+kernel@arm.linux.org.uk> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2009-04-08[WATCHDOG] orion5x_wdt: Add shutdown callback, use watchdog ping functionThomas Reitmayr
* Added a callback to disable the watchdog on shutdown. * Use a separate ping function to reduce the number of register accesses if the watchdog is already enabled and just needs to be reloaded. * Minor cleanup of function names. Signed-off-by: Thomas Reitmayr <treitmayr@devbase.at> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2009-04-08[WATCHDOG] i6300esb.c: Restructure initialization of the deviceWim Van Sebroeck
The i6300ESB watchdog should be stopped before userspace has access to the watchdog. So fix this and restructure the initialization sequence into: * See if we have a i6300 device * make sure that we have valid module parameters * Initialize the device * register the /dev/watchdog device so that userspace has access Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2009-04-08[WATCHDOG] i6300esb.c: Fix the GETSTATUS and GETBOOTSTATUS ioctls.Wim Van Sebroeck
The WDIOC_GETSTATUS and WDIOC_GETBOOTSTATUS should return WDIOF_* flags (and not counter values, ...) Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2009-04-08[WATCHDOG] i6300esb.c: CleanupWim Van Sebroeck
Cleanup to keep checkpatch.pl happy. Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2009-04-07powerpc/wdrtas: Update wdrtas_get_interval to use rtas_data_bufMark Nelson
The buffer passed to the ibm,get-system-parameter RTAS call must be in the RMA. To ensure we pass an address in the RMA use rtas_data_buf for the actual RTAS call and then copy the result to value. We can't just make it static because this can be compiled in as a module. Also add the WDRTAS_SP_SPI_LEN so we don't litter '4' throughout the function. Signed-off-by: Mark Nelson <markn@au1.ibm.com> Tested-by: Adrian Reber <adrian@lisas.de> Acked-by: Utz Bacher <utz.bacher@de.ibm.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
2009-03-30Merge branch 'hwmon-for-linus' of git://jdelvare.pck.nerim.net/jdelvare-2.6Linus Torvalds
* 'hwmon-for-linus' of git://jdelvare.pck.nerim.net/jdelvare-2.6: hwmon: (fschmd) Add support for the FSC Hades IC hwmon: (fschmd) Add support for the FSC Syleus IC i2c-i801: Instantiate FSC hardware montioring chips dmi: Let dmi_walk() users pass private data hwmon: Define a standard interface for chassis intrusion detection Move the pcf8591 driver to hwmon hwmon: (w83627ehf) Only expose in6 or temp3 on the W83667HG hwmon: (w83627ehf) Add support for W83667HG hwmon: (w83627ehf) Invert fan pin variables logic hwmon: (hdaps) Fix Thinkpad X41 axis inversion hwmon: (hdaps) Allow inversion of separate axis hwmon: (ds1621) Clean up documentation hwmon: (ds1621) Avoid unneeded register access hwmon: (ds1621) Clean up register access hwmon: (ds1621) Reorder code statements
2009-03-30dmi: Let dmi_walk() users pass private dataJean Delvare
At the moment, dmi_walk() lacks flexibility, users can't pass data to the callback function. Add a pointer for private data to make this function more flexible. Signed-off-by: Jean Delvare <khali@linux-fr.org> Cc: Hans de Goede <hdegoede@redhat.com> Cc: Matthew Garrett <mjg@redhat.com> Cc: Roland Dreier <rolandd@cisco.com>
2009-03-30Merge commit 'origin/master' into nextBenjamin Herrenschmidt
Manual merge of: arch/powerpc/include/asm/elf.h drivers/i2c/busses/i2c-mpc.c
2009-03-28Merge branch 'devel' of master.kernel.org:/home/rmk/linux-2.6-armLinus Torvalds
* 'devel' of master.kernel.org:/home/rmk/linux-2.6-arm: (422 commits) [ARM] 5435/1: fix compile warning in sanity_check_meminfo() [ARM] 5434/1: ARM: OMAP: Fix mailbox compile for 24xx [ARM] pxa: fix the bad assumption that PCMCIA sockets always start with 0 [ARM] pxa: fix Colibri PXA300 and PXA320 LCD backlight pins imxfb: Fix TFT mode i.MX21/27: remove ifdef CONFIG_FB_IMX imxfb: add clock support mxc: add arch_reset() function clkdev: add possibility to get a clock based on the device name i.MX1: remove fb support from mach-imx [ARM] pxa: build arch/arm/plat-pxa/mfp.c only when PXA3xx or ARCH_MMP defined Gemini: Add support for Teltonika RUT100 Gemini: gpiolib based GPIO support v2 MAINTAINERS: add myself as Gemini architecture maintainer ARM: Add Gemini architecture v3 [ARM] OMAP: Fix compile for omap2_init_common_hw() MAINTAINERS: Add myself as Faraday ARM core variant maintainer ARM: Add support for FA526 v2 [ARM] acorn,ebsa110,footbridge,integrator,sa1100: Convert asm/io.h to linux/io.h [ARM] collie: fix two minor formatting nits ...
2009-03-28Merge branch 'origin' into develRussell King
Conflicts: sound/soc/pxa/pxa2xx-i2s.c
2009-03-27Merge branch 'core/percpu' into percpu-cpumask-x86-for-linus-2Ingo Molnar
Conflicts: arch/parisc/kernel/irq.c arch/x86/include/asm/fixmap_64.h arch/x86/include/asm/setup.h kernel/irq/handle.c Semantic merge: arch/x86/include/asm/fixmap.h Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-03-26Merge git://git.kernel.org/pub/scm/linux/kernel/git/wim/linux-2.6-watchdogLinus Torvalds
* git://git.kernel.org/pub/scm/linux/kernel/git/wim/linux-2.6-watchdog: [WATCHDOG] i6300esb.c: start locking [WATCHDOG] i6300esb.c: convert to platform device driver [WATCHDOG] wdt.c: remove #ifdef CONFIG_WDT_501 [WATCHDOG] Fix io.h & uaccess.h includes. [WATCHDOG] More coding-style and trivial clean-up [WATCHDOG] struct file_operations should be const [WATCHDOG] cpwd.c: Coding style - Clean-up [WATCHDOG] hpwdt.c: Add new HP BMC controller. [PATCH 13/13] drivers/watchdog: use USB API functions rather than constants [WATCHDOG] orion5x_wdt: fix compile issue by providing tclk as platform data [WATCHDOG] rc32434_wdt: make sure watchdog is not running at startup [WATCHDOG] rc32434_wdt: add spin_locking [WATCHDOG] rc32434_wdt: add shutdown method [WATCHDOG] rc32434_wdt: add timeout module parameter [WATCHDOG] rc32434_wdt: clean-up driver [WATCHDOG] davinci: convert to ioremap() + io[read|write] [WATCHDOG] w83697ug: add error checking [WATCHDOG] cpwd.c & riowd.c - unlocked_ioctl