summaryrefslogtreecommitdiff
path: root/drivers
AgeCommit message (Collapse)Author
2008-01-24spi: omap2_mcspi PIO RX fixKalle Valo
Before transmission of the last word in PIO RX_ONLY mode rx+tx mode is enabled: /* prevent last RX_ONLY read from triggering * more word i/o: switch to rx+tx */ if (c == 0 && tx == NULL) mcspi_write_cs_reg(spi, OMAP2_MCSPI_CHCONF0, l); But because c is decremented after the test, c will never be zero and rx+tx will not be enabled. This breaks RX_ONLY mode PIO transfers. Fix it by decrementing c in the beginning of the various I/O loops. Signed-off-by: Kalle Valo <kalle.valo@nokia.com> Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-01-24Merge branch 'release' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux-acpi-2.6 * 'release' of git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux-acpi-2.6: Revert "ACPI: Fan: Drop force_power_state acpi_device option" ACPI: EC: "DEBUG" needs to be defined earlier ACPI: EC: add leading zeros to debug messages ACPI: EC: fix dmesg spam regression ACPI: DMI blacklist to reduce console warnings on OSI(Linux) systems. ACPI: Add ThinkPad R61, ThinkPad T61 to OSI(Linux) white-list ACPI: make _OSI(Linux) console messages smarter ACPI: Delete Intel Customer Reference Board (CRB) from OSI(Linux) DMI list ACPI: on OSI(Linux), print needed DMI rather than requesting dmidecode output ACPI: create acpi_dmi_dump() DMI: create dmi_get_slot() DMI: move dmi_available declaration to linux/dmi.h ACPI: processor: Fix null pointer dereference in throttling
2008-01-23Pull dmi-2.6.24 into release branchLen Brown
2008-01-23Pull bugzilla-9798 into release branchLen Brown
2008-01-23Pull bugzilla-8459 into release branchLen Brown
2008-01-23Pull bugzilla-9747 into release branchLen Brown
2008-01-23Revert "ACPI: Fan: Drop force_power_state acpi_device option"Len Brown
This reverts commit 93ad7c07ad487b036add8760dabcc35666a550ef. http://bugzilla.kernel.org/show_bug.cgi?id=9798 Signed-off-by: Len Brown <len.brown@intel.com>
2008-01-23ACPI: EC: "DEBUG" needs to be defined earlierMárton Németh
The "DEBUG" symbol needs to be defined before #including <linux/kernel.h> to get the pr_debug() working. Signed-off-by: Márton Németh <nm127@freemail.hu> Signed-off-by: Len Brown <len.brown@intel.com>
2008-01-23ACPI: EC: add leading zeros to debug messagesMárton Németh
Add leading zeros to pr_debug() calls. For example if x=0x0a, the format "0x%2x" will result the string "0x a", the format "0x%2.2x" will result "0x0a". Signed-off-by: Márton Németh <nm127@freemail.hu> Signed-off-by: Len Brown <len.brown@intel.com>
2008-01-23ACPI: EC: fix dmesg spam regressionAlexey Starikovskiy
Return OBF_1 optimization workaround http://bugzilla.kernel.org/show_bug.cgi?id=8459 Signed-off-by: Alexey Starikovskiy <astarikovskiy@suse.de> Signed-off-by: Len Brown <len.brown@intel.com>
2008-01-23Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparc-2.6Linus Torvalds
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparc-2.6: [SPARC]: Constify function pointer tables. [SPARC64]: Fix section error in sparcspkr [SPARC64]: Fix of section mismatch warnings.
2008-01-23Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6Linus Torvalds
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6: sis190: scheduling while atomic error sis190: mdio operation failure is not correctly detected sis190: remove duplicate INIT_WORK sis190: add cmos ram access code for the SiS19x/968 chipset pair [INET]: Fix truesize setting in ip_append_data [NETNS]: Re-export init_net via EXPORT_SYMBOL. iwlwifi: fix possible read attempt on ucode that is not available [IPV4]: Add missing skb->truesize increment in ip_append_page(). [TULIP] DMFE: Fix SROM parsing regression. [BLUETOOTH]: Move children of connection device to NULL before connection down.
2008-01-23ACPI: DMI blacklist to reduce console warnings on OSI(Linux) systems.Len Brown
This DMI blacklist reduces the console messages on systems which have a BIOS that invokes OSI(Linux). As the DMI blacklist already knows about these systems, the request for DMI info itself is disabled. Further, if OSI(Linux) has already been determined to have no beneift, we disable the console message requesting acpi_osi=Linux test results. Signed-off-by: Len Brown <len.brown@intel.com>
2008-01-23ACPI: Add ThinkPad R61, ThinkPad T61 to OSI(Linux) white-listLen Brown
acpi_osi=Linux helps sound on these systems. Signed-off-by: Len Brown <len.brown@intel.com>
2008-01-23ACPI: make _OSI(Linux) console messages smarterLen Brown
If BIOS invokes _OSI(Linux), the kernel response depends on what the ACPI DMI list knows about the system, and that is reflectd in dmesg: 1) System unknown to DMI: ACPI: BIOS _OSI(Linux) query ignored ACPI: DMI System Vendor: LENOVO ACPI: DMI Product Name: 7661W1P ACPI: DMI Product Version: ThinkPad T61 ACPI: DMI Board Name: 7661W1P ACPI: DMI BIOS Vendor: LENOVO ACPI: DMI BIOS Date: 10/18/2007 ACPI: Please send DMI info above to linux-acpi@vger.kernel.org ACPI: If "acpi_osi=Linux" works better, please notify linux-acpi@vger.kernel.org 2) System known to DMI, but effect of OSI(Linux) unknown: ACPI: DMI detected: Lenovo ThinkPad T61 ... ACPI: BIOS _OSI(Linux) query ignored via DMI ACPI: If "acpi_osi=Linux" works better, please notify linux-acpi@vger.kernel.org 3) System known to DMI, which disables _OSI(Linux): ACPI: DMI detected: Lenovo ThinkPad T61 ... ACPI: BIOS _OSI(Linux) query ignored via DMI 4) System known to DMI, which enable _OSI(Linux): ACPI: DMI detected: Lenovo ThinkPad T61 ACPI: Added _OSI(Linux) ... ACPI: BIOS _OSI(Linux) query honored via DMI cmdline overrides take precidence over the built-in default and the DMI prescribed default. cmdline "acpi_osi=Linux" results in: ACPI: BIOS _OSI(Linux) query honored via cmdline Signed-off-by: Len Brown <len.brown@intel.com>
2008-01-23ACPI: Delete Intel Customer Reference Board (CRB) from OSI(Linux) DMI listLen Brown
Linux does not want BIOS writers to invoke _OSI(Linux) - for in the field it causes more Windows incompatibility problems than it solves. So when it is seen in the BIOS for an Intel Customer Reference Board, Linux should ignore its effect by default, and should complain loudly. Otherwise, the reference BIOS will go unfixed, and the bad BIOS will spread to the field. Users of this board can get the old behavior with "acpi_osi=Linux" As this was the only entry, delete acpi_osl_dmi_table[]. Signed-off-by: Len Brown <len.brown@intel.com>
2008-01-23ACPI: on OSI(Linux), print needed DMI rather than requesting dmidecode outputLen Brown
Signed-off-by: Len Brown <len.brown@intel.com>
2008-01-23ACPI: create acpi_dmi_dump()Len Brown
A utility routine to print common entries used for ACPI-related DMI blacklist entries. Signed-off-by: Len Brown <len.brown@intel.com>
2008-01-23DMI: create dmi_get_slot()Len Brown
This simply allows other sub-systems (such as ACPI) to access and print out slots in static dmi_ident[]. Signed-off-by: Len Brown <len.brown@intel.com>
2008-01-23DMI: move dmi_available declaration to linux/dmi.hLen Brown
Signed-off-by: Len Brown <len.brown@intel.com>
2008-01-23Merge git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi-rc-fixes-2.6Linus Torvalds
* git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi-rc-fixes-2.6: [SCSI] initio: fix module hangs on loading
2008-01-23drm/i915: add support for E7221 chipsetCarlos Martín
E7221 chipset is a server version of the i915. Signed-off-by: Dave Airlie <airlied@linux.ie> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-01-23agp/intel: add support for E7221 chipsetCarlos Martín
The E7221 chipset is a 915 rebadged for the Intel server line. Signed-off-by: Dave Airlie <airlied@linux.ie> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-01-23[SCSI] initio: fix module hangs on loadingStuart Swales
I've verified (on my Initio 9100 with a DAT drive) that the 2.6.24-rc8-git6 initio module still hangs on loading. These fixes (other than the printk) are needed to get the module to load ok (and work correctly) with my adapter & tape drive. a) printk cosmetic fix b) cblk->sglen needs setting for later DMA I/O routines to use c) host->bios_addr needs setting for debug output correctness d) semaph & semaph_lock initialisation had got lost since 2.6.22 e) since 2.6.22 the bios data address was truncated to 16 bits (needs 20 when shifted left) Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2008-01-23sis190: scheduling while atomic errorFrancois Romieu
sis190_tx_timeout -> sis190_hw_start -> sis190_soft_reset -> msleep *splat* PCI transactions are correctly flushed here. The msleep() is probably useless. Signed-off-by: Francois Romieu <romieu@fr.zoreil.com> Cc: K.M. Liu <kmliu@sis.com.tw>
2008-01-23sis190: mdio operation failure is not correctly detectedFrancois Romieu
i ranges from 0 to 100 in the 'for' loop a few lines above. Reported by davem. Signed-off-by: Francois Romieu <romieu@fr.zoreil.com> Cc: K.M. Liu <kmliu@sis.com.tw>
2008-01-23sis190: remove duplicate INIT_WORKFrancois Romieu
It is already done in sis190_init_one. Signed-off-by: Francois Romieu <romieu@fr.zoreil.com> Cc: K.M. Liu <kmliu@sis.com.tw>
2008-01-23sis190: add cmos ram access code for the SiS19x/968 chipset pairFrancois Romieu
More work is needed to handle correctly the PHY of the new devices when connected to a 10Mb link but this change already helps some users as is. Fix for: http://bugzilla.kernel.org/show_bug.cgi?id=9467 Signed-off-by: Francois Romieu <romieu@fr.zoreil.com> Cc: K.M. Liu <kmliu@sis.com.tw> Cc: J. Gleacher <jgleacher@yahoo.com> Cc: Alexandre Penasso Teixeira <alexandre@keepsoftware.com> Cc: Arliton Rocha <arliton@gmail.com> Cc: Juan Jose Pablos <juanjo@apertus.es> Cc: Wipat Srutiprom <wipat.s@psu.ac.th>
2008-01-23iwlwifi: fix possible read attempt on ucode that is not availableReinette Chatre
This fixes a NULL pointer dereference that can occur when the ucode is not loaded at the time __iwl_up is called. The problem was reported at http://kerneloops.org/raw.php?rawid=2765&msgid= Signed-off-by: Reinette Chatre <reinette.chatre@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-01-23[TULIP] DMFE: Fix SROM parsing regression.David S. Miller
Changeset 16b110c3fd760620b4a787db6ed512fe531ab1b5 (dmfe warning fix) bothed up the offsets read from the SROM so that it doesn't read the same datums it used to. The change made transformations like turning: "srom + 34" into "(__le32 *)srom + 34/4" which doesn't work because 4 does not divide evenly into 34 so we're using a different pointer offset than in the original code. I've changed theses cases in dmfe_parse_srom() to consistently use "(type *)(srom + offset)" preserving the offsets from the original code. Signed-off-by: David S. Miller <davem@davemloft.net>
2008-01-22Fix file references in documentation and KconfigJohann Felix Soden
Fix typo in arch/powerpc/boot/flatdevtree_env.h. There is no Documentation/networking/ixgbe.txt. README.cycladesZ is now in Documentation/. wavelan.p.h is now in drivers/net/wireless/. HFS.txt is now Documentation/filesystems/hfs.txt. OSS-files are now in sound/oss/. Signed-off-by: Johann Felix Soden <johfel@users.sourceforge.net> Acked-by: Randy Dunlap <randy.dunlap@oracle.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-01-22Merge branch 'release' of git://lm-sensors.org/kernel/mhoffman/hwmon-2.6Linus Torvalds
* 'release' of git://lm-sensors.org/kernel/mhoffman/hwmon-2.6: hwmon: (it87) request only Environment Controller ports
2008-01-22W1: w1_therm.c is flagging 0C etc as invalidDavid Fries
The extra rom[0] check is flagging valid temperatures as invalid when there is already a CRC data transmission check. w1_therm_read_bin() if (rom[8] == crc && rom[0]) verdict = 1; Requiring rom[0] to be non-zero will flag as invalid temperature conversions when the low byte is zero, specifically the temperatures 0C, 16C, 32C, 48C, -16C, -32C, and -48C. The CRC check is produced on the device for the previous 8 bytes and is required to ensure the data integrity in transmission. I don't see why the extra check for rom[0] being non-zero is in there. Evgeniy Polyakov didn't know either. Just for a check I unplugged the sensor, executed a temperature conversion, and read the results. The read was all ff's, which also failed the CRC, so it doesn't need to protect against a disconnected sensor. I have more extensive patches in the work, but these two trivial ones will do for today. I would like to hear from people who use the ds2490 USB to one wire dongle. 1 if you would be willing to test the patches as I currently only have the one sensor on a short parisite powered wire, 2 if there is any cheap sources for the ds2490. Signed-off-by: David Fries <david@fries.net> Acked-by: Evgeniy Polyakov <johnpol@2ka.mipt.ru> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-01-22W1: w1_therm.c ds18b20 decode freezing temperatures correctlyDavid Fries
Correct the decoding of negative C temperatures. The code did a binary OR of two bytes to make a 16 bit value, but assignd it to an integer. This caused the value to not be sign extended and to loose that it was a negative number in the assignment. Before the patch (in my freezer), w1_slave ed fe 4b 46 7f ff 03 10 e4 : crc=e4 YES ed fe 4b 46 7f ff 03 10 e4 t=4078 With the patch, e3 fe 4b 46 7f ff 0d 10 81 : crc=81 YES e3 fe 4b 46 7f ff 0d 10 81 t=-17 Signed-off-by: David Fries <david@fries.net> Acked-by: Evgeniy Polyakov <johnpol@2ka.mipt.ru> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-01-22hwmon: (it87) request only Environment Controller portsBjorn Helgaas
The IT8705F and related parts are Super I/O controllers that contain many separate devices. Some BIOSes describe IT8705F I/O port usage under a motherboard device (PNP0C02) with overlapping regions, e.g., 0x290-0x29f and 0x290-0x294. The it87 driver supports only the Environment Controller, which requires only two ISA ports, but it used to request an eight-port range. If that range exceeds a range reported by the BIOS, as 0x290-0x297 would, the request fails, and the it87 driver cannot claim the device. This patch makes the it87 driver request only the two ports used for the Environment Controller device. Systems where this problem has been reported: Gigabyte GA-K8N Ultra 9 Gigabyte M56S-S3 Gigabyte GA-965G-DS3 Kernel bug reports: http://bugzilla.kernel.org/show_bug.cgi?id=9514 http://lkml.org/lkml/2007/12/4/466 Related change: http://git.kernel.org/?p=linux/kernel/git/torvalds/linux-2.6.git;a=commitdiff;h=a7839e960675b549f06209d18283d5cee2ce9261 The patch above increases the number of PNP port resources we support. Prior to this patch, we ignored some port resources, which masked the it87 problem. Signed-off-by: Bjorn Helgaas <bjorn.helgaas@hp.com> Signed-off-by: Mark M. Hoffman <mhoffman@lightlink.com>
2008-01-21[SPARC64]: Fix section error in sparcspkrSam Ravnborg
With a sparc64 defconfig modified to set CONFIG_HOTPLUG=n the following error happened during link of vmlinux: local symbol 0: discarded in section `.devexit.text' from drivers/built-in.o local symbol 1: discarded in section `.devexit.text' from drivers/built-in.o (The error message above is from kbuild.git but it happens in mainline too) The error happens becase there is a reference from .text/.data to a function marked __devexit. With CONFIG_HOTPLUG=n all code marked __devexit are discarded and the linker complains. It was tracked down to sparcspkr.c which were missing __devexit_p() around the function pointers. Unfortunately modpost did not catch this since modpost do not warn about references from .data to .devexit from variables named *_driver. Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-01-21Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6Linus Torvalds
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6: [ICMP]: ICMP_MIB_OUTMSGS increment duplicated [IPV6]: RFC 2011 compatibility broken [IPV6]: ICMP6_MIB_OUTMSGS increment duplicated [NET]: rtnl_link: fix use-after-free [AF_KEY]: Fix skb leak on pfkey_send_migrate() error [ATM] atm/suni.c: Fix section mismatch. [ATM] atm/idt77105.c: Fix section mismatch. [IrDA]: af_irda memory leak fixes [NEIGH]: Revert 'Fix race between neigh_parms_release and neightbl_fill_parms' [NETFILTER]: bridge-netfilter: fix net_device refcnt leaks [IPV6] ROUTE: Make sending algorithm more friendly with RFC 4861. [IPV4] FIB_HASH : Avoid unecessary loop in fn_hash_dump_zone() [NET]: Fix interrupt semaphore corruption in Intel drivers. [IPV4] fib_trie: fix duplicated route issue [IPV4] fib_hash: fix duplicated route issue [IPV6]: Mischecked tw match in __inet6_check_established. rfkill: call rfkill_led_trigger_unregister() on error
2008-01-21Merge branch 'upstream' of git://ftp.linux-mips.org/pub/scm/upstream-linusLinus Torvalds
* 'upstream' of git://ftp.linux-mips.org/pub/scm/upstream-linus: tc35815: Use irq number for tc35815-mac platform device id [MIPS] Malta: Fix reading the PCI clock frequency on big-endian [MIPS] SMTC: Fix build error.
2008-01-21s3c2410_fb: fix line length calculationStefan Schmidt
Fix line length calculation. var->width is the size of the display in mm. We like to use the pixel size. Without this fix, dynamic (fbset) based resolution and depths changes with s3c2410_fb don't work at all. Spotted by john cass <johnpcass@yahoo.com> Signed-off-by: Stefan Schmidt <stefan@openmoko.org> Signed-off-by: Harald Welte <laforge@openmoko.org> Acked-by: Ben Dooks <ben-linux@fluff.org> Acked-by: Arnaud Patard <arnaud.patard@rtp-net.org> Acked-by: Krzysztof Helt <krzysztof.h1@wp.pl> Cc: "Antonino A. Daplas" <adaplas@pol.net> Cc: Russell King <rmk@arm.linux.org.uk> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@akpm@linux-foundation.org>
2008-01-21keyspan: fix oopsAlan Cox
If we get a data URB back from the hardware after we have put the tty to bed we go kaboom. Fortunately all we need to do is process the URB without trying to ram its contents down the throat of an ex-tty. Signed-off-by: Alan Cox <alan@redhat.com> Cc: Greg KH <greg@kroah.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@akpm@linux-foundation.org>
2008-01-22tc35815: Use irq number for tc35815-mac platform device idAtsushi Nemoto
The tc35815-mac platform device used a pci bus number and a devfn to identify its target device, but the pci bus number may vary if some bus-bridges are found. Use irq number which is be unique for embedded controllers. Signed-off-by: Atsushi Nemoto <anemo@mba.ocn.ne.jp> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2008-01-20[NET]: rtnl_link: fix use-after-freePatrick McHardy
When unregistering the rtnl_link_ops, all existing devices using the ops are destroyed. With nested devices this may lead to a use-after-free despite the use of for_each_netdev_safe() in case the upper device is next in the device list and is destroyed by the NETDEV_UNREGISTER notifier. The easy fix is to restart scanning the device list after removing a device. Alternatively we could add new devices to the front of the list to avoid having dependant devices follow the device they depend on. A third option would be to only restart scanning if dev->iflink of the next device matches dev->ifindex of the current one. For now this seems like the safest solution. With this patch, the veth rtnl_link_ops unregistration can use rtnl_link_unregister() directly since it now also handles destruction of multiple devices at once. Signed-off-by: Patrick McHardy <kaber@trash.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-01-20[ATM] atm/suni.c: Fix section mismatch.Adrian Bunk
EXPORT_SYMBOL'ed code mustn't be __*init. Signed-off-by: Adrian Bunk <bunk@kernel.org> Acked-by: Sam Ravnborg <sam@ravnborg.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-01-20[ATM] atm/idt77105.c: Fix section mismatch.Adrian Bunk
EXPORT_SYMBOL'ed code mustn't be __*init. Signed-off-by: Adrian Bunk <bunk@kernel.org> Acked-by: Sam Ravnborg <sam@ravnborg.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-01-20[NET]: Fix interrupt semaphore corruption in Intel drivers.David S. Miller
Several of the Intel ethernet drivers keep an atomic counter used to manage when to actually hit the hardware with a disable or an enable. The way the net_rx_work() breakout logic works during a pending napi_disable() is that it simply unschedules the poll even if it still has work. This can potentially leave interrupts disabled, but that is OK because all of the drivers are about to disable interrupts anyways in all such code paths that do a napi_disable(). Unfortunately, this trips up the semaphore used here in the Intel drivers. If you hit this case, when you try to bring the interface back up it won't enable interrupts. A reload of the driver module fixes it of course. So what we do is make sure all the sequences now go: napi_disable(); atomic_set(&adapter->irq_sem, 0); *_irq_disable(); which makes sure the counter is always in the correct state. Reported by Robert Olsson. Signed-off-by: David S. Miller <davem@davemloft.net>
2008-01-19Remove bogus duplicate CONFIG_LGUEST_GUEST entry.Rusty Russell
It was moved to arch/x86/lguest/Kconfig, but I lost the deletion part in a patch suffle. My confused one-liner "fix" to turn it on is also reverted: 84f7466ee20cc094aa38617abfa2f3834871f054 Signed-off-by: Rusty Russell <rusty@rustcorp.com.au> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-01-19pata_pdc202xx_old: Fix crashes with ATAPIAlan Cox
The PDC202xx older devices do not support ATAPI DMA via the usual interfaces. What documentation I have isn't sufficient to support DMA and it isn't clear if the Windows drivers do this or it is possible at all. (Neither do the drivers/ide old drivers) So turn it ATAPI DMA off, these are disk optimised controllers. Signed-off-by: Alan Cox <alan@redhat.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-01-19Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/roland/infiniband * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/roland/infiniband: IB/ipath: Fix receiving UD messages with immediate data
2008-01-18Merge branch 'upstream-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/jgarzik/netdev-2.6 * 'upstream-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jgarzik/netdev-2.6: (31 commits) Replace cpmac fix dl2k: the rest dl2k: MSCR, MSSR, ESR, PHY_SCR fixes dl2k: BMSR fixes dl2k: ANAR, ANLPAR fixes dl2k: BMCR_t fixes 3c574, 3c515 bitfields abuse sbni endian fixes wan/lmc bitfields fixes dscc4 endian fixes S2io: Fixed synchronization between scheduling of napi with card reset and close atl1: fix frame length bug Documentation: add a guideline for hard_start_xmit method Revert "sky2: remove check for PCI wakeup setting from BIOS" e1000e Kconfig: remove ref to nonexistant docs bonding: Don't hold lock when calling rtnl_unlock bonding: fix lock ordering for rtnl and bonding_rwsem bonding: Fix up parameter parsing bonding: release slaves when master removed via sysfs bonding: fix locking during alb failover and slave removal ...
2008-01-18Merge git://git.kernel.org/pub/scm/linux/kernel/git/wim/linux-2.6-watchdogLinus Torvalds
* git://git.kernel.org/pub/scm/linux/kernel/git/wim/linux-2.6-watchdog: [WATCHDOG] clarify watchdog operation in documentation [WATCHDOG] Revert "Stop looking for device as soon as one is found"
generated by cgit v1.2.3 (git 2.39.1) at 2024-11-07 16:34:11 +0000