summaryrefslogtreecommitdiff
path: root/drivers
AgeCommit message (Collapse)Author
2009-09-16ssb/sdio: fix printk format warningsRandy Dunlap
Fix printk format warnings: drivers/ssb/sdio.c:336: warning: format '%u' expects type 'unsigned int', but argument 7 has type 'size_t' drivers/ssb/sdio.c:443: warning: format '%u' expects type 'unsigned int', but argument 7 has type 'size_t' Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-09-16p54usb: add Zcomax XG-705A usbidChristian Lamparter
This patch adds a new usbid for Zcomax XG-705A to the device table. Cc: stable@kernel.org Reported-by: Jari Jaakola <jari.jaakola@gmail.com> Signed-off-by: Christian Lamparter <chunkeey@googlemail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-09-14ssb: Fix error when V1 SPROM extraction is forcedmaster-2009-09-14Larry Finger
When an SPROM revision is not recognized, the code falls back to a V1 SPROM; however, that revision is not forced in the appropriate structure. Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-09-14iwlwifi: disable powersave for 4965Johannes Berg
There's a bug in 4965 powersave that appears to be related to the way it keeps track of its data during sleep, but we haven't found it yet. Due to that, using powersave may spontaneously cause the device to SYSASSERT when transitioning from sleep to wake. Therefore, disable powersave for 4965, until (if ever, unfortunately) we can identify and fix the problem. Cf. http://bugzilla.intellinuxwireless.org/show_bug.cgi?id=1982 which was closed, but now has re-appeared with IDLE mode, which probably means we never really fixed it. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: Reinette Chatre <reinette.chatre@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-09-14iwlwifi: find the correct first antennaWey-Yi Guy
We can not assume antenna "A" is the first valid anttena for all the NIC. Need to make sure choice the correct antenna based on h/w configuration for transmit to avoid sending frame on invalid antenna Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com> Signed-off-by: Reinette Chatre <reinette.chatre@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-09-14iwlwifi: fix potential rx buffer lossReinette Chatre
RX handling maintains a few lists that keep track of the RX buffers. Buffers move from one list to the other as they are used, replenished, and again made available for usage. In one such instance, when a buffer is used it enters the "rx_used" list. When buffers are replenished an skb is attached to the buffer and it is moved to the "rx_free" list. The problem here is that the buffer is first removed from the "rx_used" list _before_ the skb is allocated. Thus, if the skb allocation fails this buffer remains removed from the "rx_used" list and is thus lost for future usage. Fix this by first allocating the skb before trying to attach it to a list. We add an additional check to not do this unnecessarily. Reported-by: Rick Farrington <rickdic@hotmail.com> Signed-off-by: Reinette Chatre <reinette.chatre@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-09-14iwlwifi: fix HT operation in 2.4 GHz bandDaniel C Halperin
When we cleaned up the driver to properly tell mac80211 about HT rates ("iwlwifi: use iwl_hwrate_get_mac80211_idx where appropriate"), we broke internal rate indexing in 2.4 GHz band. Signed-off-by: Daniel C Halperin <daniel.c.halperin@intel.com> Tested-by: Wey-Yi Guy <wey-yi.w.guy@intel.com> Signed-off-by: Reinette Chatre <reinette.chatre@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-09-14b43: Fix resume failureMichael Buesch
This fixes a resume failure where a signal is pending on resume so the firmware upload fails. This removes the interruptible sleep, because we don't really need it. In the worst case (with broken firmware) the sleep loop will take 1 second. In the common case (working firmware), it will only take a few milliseconds. So we don't really need to be interruptible. Signed-off-by: Michael Buesch <mb@bu3sch.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-09-14ssb: Disable verbose SDIO coreswitchMichael Buesch
Disable SDIO coreswitch debugging. Signed-off-by: Michael Buesch <mb@bu3sch.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-09-14wireless: default CONFIG_WLAN to yLuis R. Rodriguez
When this was added no defaults were set and it seems this implies n. Default this to y. Reported-by: Jouni Malinen <jouni.malinen@atheros.com> Signed-off-by: Luis R. Rodriguez <lrodriguez@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-09-14ath9k: Fix bug in ANI channel handlingSujith
When processing MIB interrupts, OFDM and CCK error handling routines for low RSSI values have to be invoked only when the channel mode is 11G/11B. Since HT channels will also fall under the bands 2Ghz/5Ghz, check appropriately. Signed-off-by: Sujith <Sujith.Manoharan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-09-14b43: Force-wake queues on initMichael Buesch
Force wake the mac80211 queues on init. Under rare circumstances they may be stopped, if a DMA error or something else causes a device reset while a queue was stopped. Signed-off-by: Michael Buesch <mb@bu3sch.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-09-14hostap: Revert a toxic part of the conversion to net_device_opsMartin Decky
As the hostap driver was converted to use net_device_ops, a mistake was made in hostap_main.c (commit 5ae4efbcd2611562a8b93596be034e63495706a5). Originally, the tx_queue_len was set to 0 for every other interface than HOSTAP_INTERFACE_MASTER, but the new fragment of code sets tx_queue_len to 0 only for HOSTAP_INTERFACE_MASTER. The opposite of the previous behavior makes the driver to drop all packets in AP mode. Change the way 0 is assigned to tx_queue_len according to the original logic. Signed-off-by: Martin Decky <martin@decky.cz> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-09-11netxen: update copyrightDhananjay Phadke
o Add QLogic copyright, add linux-driver@qlogic.com to MAINTAINERS. o Delete old contact information. Signed-off-by: Dhananjay Phadke <dhananjay@netxen.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-09-11netxen: fix tx timeout recoveryAmit Kumar Salecha
Redesign tx timeout handling in line with new firmware reset design that co-ordinates with other PCI function drivers. o For NX3031, first try to reset PCI function's own context before requesting firmware reset. o For NX2031, since firmware heartbit is not supported directly request firmware reset. Signed-off-by: Amit Kumar Salecha <amit@netxen.com> Signed-off-by: Dhananjay Phadke <dhananjay@netxen.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-09-11netxen: fix file firmware leakDhananjay Phadke
Release file firmware when no firmware reset is required. Signed-off-by: Dhananjay Phadke <dhananjay@netxen.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-09-11netxen: improve pci memory accessDhananjay Phadke
o Access on card memory through memory controller (agent) rather than moving small pci window around. Clean up the code for moving windows around. o Restrict memory accesss to 64 bit, currently only firmware download uses this. Signed-off-by: Dhananjay Phadke <dhananjay@netxen.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-09-11netxen: change firmware write sizeAmit Kumar Salecha
Use 8 byte strides for firmware download into card memory since oncard memory controller needs 8 byte (64 bit) accesses. This avoids unnecessary rmw cycles. Signed-off-by: Amit Kumar Salecha <amit@netxen.com> Signed-off-by: Dhananjay Phadke <dhananjay@netxen.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-09-11tg3: Fix return ring size breakageMatt Carlson
Commit f6eb9b1fc1411d22c073f5264e5630a541d0f7df, "tg3: Add 5717 asic rev" changed how the rx return ring size operations are done. It effectively inverts the sense of the previous test, but it failed to also invert the resulting sizes. This patch corrects that error. Signed-off-by: Matt Carlson <mcarlson@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-09-11netxen: build fix for INET=nRandy Dunlap
When CONFIG_INET is disabled, netxen has a build failure: netxen_nic_main.c:(.text+0x118fd1): undefined reference to `netxen_config_indev_addr' so make that function just an empty stub when CONFIG_INET=n. (not "inline" since that conflicts with other declarations of it) Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com> Acked-by: Dhananjay Phadke <dhananjay@netxen.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-09-11cdc-phonet: autoconfigure Phonet addressRémi Denis-Courmont
Signed-off-by: Rémi Denis-Courmont <remi.denis-courmont@nokia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-09-11net: Add DEVTYPE support for Ethernet based devicesMarcel Holtmann
The Ethernet framing is used for a lot of devices these days. Most prominent are WiFi and WiMAX based devices. However for userspace application it is important to classify these devices correctly and not only see them as Ethernet devices. The daemons like HAL, DeviceKit or even NetworkManager with udev support tries to do the classification in userspace with a lot trickery and extra system calls. This is not good and actually reaches its limitations. Especially since the kernel does know the type of the Ethernet device it is pretty stupid. To solve this problem the underlying device type needs to be set and then the value will be exported as DEVTYPE via uevents and available within udev. # cat /sys/class/net/wlan0/uevent DEVTYPE=wlan INTERFACE=wlan0 IFINDEX=5 This is similar to subsystems like USB and SCSI that distinguish between hosts, devices, disks, partitions etc. The new SET_NETDEV_DEVTYPE() is a convenience helper to set the actual device type. All device types are free form, but for convenience the same strings as used with RFKILL are choosen. Signed-off-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-09-11mv643xx_eth.c: remove unused txq_set_wrr()Mikael Pettersson
The txq_set_wrr() function in drivers/net/mv643xx_eth.c is unused, not even referenced under #if 0 or something like that, which results in a compile-time warning: drivers/net/mv643xx_eth.c:1070: warning: 'txq_set_wrr' defined but not used Fix: remove it. Signed-off-by: Mikael Pettersson <mikpe@it.uu.se> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-09-11ucc_geth: Fix hangs after switching from full to half duplexAnton Vorontsov
MPC8360 QE UCC ethernet controllers hang when changing link duplex under a load (a bit of NFS activity is enough). PHY: mdio@e0102120:00 - Link is Up - 1000/Full sh-3.00# ethtool -s eth0 speed 100 duplex half autoneg off PHY: mdio@e0102120:00 - Link is Down PHY: mdio@e0102120:00 - Link is Up - 100/Half NETDEV WATCHDOG: eth0 (ucc_geth): transmit queue 0 timed out ------------[ cut here ]------------ Badness at c01fcbd0 [verbose debug info unavailable] NIP: c01fcbd0 LR: c01fcbd0 CTR: c0194e44 ... The cure is to disable the controller before changing speed/duplex and enable it afterwards. Though, disabling the controller might take quite a while, so we better not grab any spinlocks in adjust_link(). Instead, we quiesce the driver's activity, and only then disable the controller. Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-09-11ucc_geth: Rearrange some code to avoid forward declarationsAnton Vorontsov
We'll need ugeth_disable() and ugeth_enable() calls earlier in the file, so rearrange some code to avoid forward declarations. The patch doesn't contain any functional changes. Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com> Acked-by: Timur Tabi <timur@freescale.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-09-11phy/marvell: Make non-aneg speed/duplex forcing work for 88E1111 PHYsAnton Vorontsov
According to specs, when auto-negotiation is disabled, Marvell PHYs need a software reset after changing speed/duplex forcing bits. Otherwise, the modified bits have no effect. Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-09-11drivers/net/phy: introduce missing kfreeJulia Lawall
Error handling code following a kzalloc should free the allocated data. The semantic match that finds the problem is as follows: (http://www.emn.fr/x-info/coccinelle/) // <smpl> @r exists@ local idexpression x; statement S; expression E; identifier f,f1,l; position p1,p2; expression *ptr != NULL; @@ x@p1 = \(kmalloc\|kzalloc\|kcalloc\)(...); ... if (x == NULL) S <... when != x when != if (...) { <+...x...+> } ( x->f1 = E | (x->f1 == NULL || ...) | f(...,x->f1,...) ) ...> ( return \(0\|<+...x...+>\|ptr\); | return@p2 ...; ) @script:python@ p1 << r.p1; p2 << r.p2; @@ print "* file: %s kmalloc %s return %s" % (p1[0].file,p1[0].line,p2[0].line) // </smpl> Signed-off-by: Julia Lawall <julia@diku.dk> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-09-11drivers/net/wan: introduce missing kfreeJulia Lawall
Error handling code following a kmalloc should free the allocated data. The semantic match that finds the problem is as follows: (http://www.emn.fr/x-info/coccinelle/) // <smpl> @r exists@ local idexpression x; statement S; expression E; identifier f,f1,l; position p1,p2; expression *ptr != NULL; @@ x@p1 = \(kmalloc\|kzalloc\|kcalloc\)(...); ... if (x == NULL) S <... when != x when != if (...) { <+...x...+> } ( x->f1 = E | (x->f1 == NULL || ...) | f(...,x->f1,...) ) ...> ( return \(0\|<+...x...+>\|ptr\); | return@p2 ...; ) @script:python@ p1 << r.p1; p2 << r.p2; @@ print "* file: %s kmalloc %s return %s" % (p1[0].file,p1[0].line,p2[0].line) // </smpl> Signed-off-by: Julia Lawall <julia@diku.dk> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-09-11Subject: [PATCH] appletalk: Fix skb leak when ipddp interface is not loadedArnaldo Carvalho de Melo
And also do a better job of returning proper NET_{RX,XMIT}_ values. Based on a patch and suggestions by Mark Smith. This fixes CVE-2009-2903 Reported-by: Mark Smith <lk-netdev@lk-netdev.nosense.org> Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-09-09dm9000: Use resource_size instead of private macroTobias Klauser
The macro res_size in drivers/net/dm9000.c is a copy of resource_size in linux/ioport.h. Remove the function and use resource_size instead. Signed-off-by: Tobias Klauser <tklauser@distanz.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-09-09dm9000: Remove unnecessary memset of netdev private dataTobias Klauser
The memory for the private data is allocated using kzalloc in alloc_etherdev (or alloc_netdev_mq respectively) so there is no need to set it to 0 again. Signed-off-by: Tobias Klauser <tklauser@distanz.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-09-09netxen: fix tx descriptor structureAmit Kumar Salecha
Fix the offset of vlan_TCI field in cmd_desc_type0. Signed-off-by: Amit Kumar Salecha <amit@qlogic.com> Signed-off-by: Dhananjay Phadke <dhananjay@netxen.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-09-09netxen: fix check for ip addr hashing supportAmit Kumar Salecha
Fix typo in checking dest ip has support before programming destip addresses. Signed-off-by: Amit Kumar Salecha <amit@netxen.com> Signed-off-by: Dhananjay Phadke <dhananjay@netxen.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-09-09Merge branch 'master' of ↵David S. Miller
git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-next-2.6
2009-09-09ath9k: Initialize the priority gpio for BT coex 3-wireVasanthakumar Thiagarajan
Oops, a stupid mistake in the original patch which adds coex 3-wire support. Bluetooth priority gpio needs to be gpio 7. Signed-off-by: Vasanthakumar Thiagarajan <vasanth@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-09-09ath9k: Get rid of the modparam btcoex_enableVasanthakumar Thiagarajan
Signed-off-by: Vasanthakumar Thiagarajan <vasanth@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-09-09ath9k: Enable btcoex based on the subsystem id of the deviceVasanthakumar Thiagarajan
Signed-off-by: Vasanthakumar Thiagarajan <vasanth@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-09-09ath9k: Store subsystem id in struct hw_versionVasanthakumar Thiagarajan
This subsystem id will be used later to turn on the btcoex support. Signed-off-by: Vasanthakumar Thiagarajan <vasanth@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-09-09wireless: mark prism54 as deprecated and mark for removalLuis R. Rodriguez
The preferred module is p54pci which also supports FullMAC PCI / Cardbus devices. We schedule removal for 2.6.34. Reason to remove this is no one really is testing prism54 anymore, and while it works p54pci provides support for the same hardware. It should be noted I have been told some FullMAC devices may not have worked with the SoftMAC driver but to date we have yet to recieve a single bug report regarding this. If there are users out there please let us know! Cc: aquilaver@yahoo.com Cc: linux-kernel@vger.kernel.org Cc: Dan Williams <dcbw@redhat.com> Cc: Kai Engert <kengert@redhat.com> Cc: Jean Tourrilhes <jt@hpl.hp.com> Cc: Tim de Waal<tim.dewaal@yahoo.com> Cc: Roy Marples <uberlord@gentoo.org> Cc: Alan Cox <alan@lxorguk.ukuu.org.uk> Cc: Christian Lamparter <chunkeey@web.de> Cc: Björn Steinbrink <B.Steinbrink@gmx.de> Cc: Tim Gardner <tim.gardner@canonical.com> Cc: Larry Finger <Larry.Finger@lwfinger.net> Cc: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: Luis R. Rodriguez <lrodriguez@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-09-09b44/b43/b43legacy: Fix switch warnings introduced by SSB-SDIOMichael Buesch
This fixes some gcc warnings for switch statements. Signed-off-by: Michael Buesch <mb@bu3sch.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-09-09ssb: Implement SDIO host bus supportAlbert Herranz
Add support for communicating with a Sonics Silicon Backplane through a SDIO interface, as found in the Nintendo Wii WLAN daughter card. The Nintendo Wii WLAN card includes a custom Broadcom 4318 chip with a SDIO host interface. Signed-off-by: Albert Herranz <albert_herranz@yahoo.es> Signed-off-by: Michael Buesch <mb@bu3sch.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-09-09ath9k: Remove unnecessary casting to u8 in pci_read_config_byte() callVasanthakumar Thiagarajan
Signed-off-by: Vasanthakumar Thiagarajan <vasanth@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-09-09ath9k: Disable ASPM when btcoex is activeVasanthakumar Thiagarajan
Signed-off-by: Vasanthakumar Thiagarajan <vasanth@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-09-09b43: Fix sparse warning in hw-tkip codeMichael Buesch
This fixes a sparse warning in the hardware-TKIP code: drivers/net/wireless/b43/xmit.c:272:18: warning: incorrect type in assignment (different base types) drivers/net/wireless/b43/xmit.c:272:18: expected unsigned short [unsigned] [short] <noident> drivers/net/wireless/b43/xmit.c:272:18: got restricted unsigned short [usertype] <noident> The code should work correctly with and without this patch applied. Signed-off-by: Michael Buesch <mb@bu3sch.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-09-09b43: Really disable QoS, if requestedMichael Buesch
Currently, when QoS-disable is requested, we would leave QoS enabled in firmware, but only queue frames on one queue. Change that and also tell firmware about disabled QoS, so it completely ignores all the QoS parameters. Also don't upload the parameters, if QoS is disabled. Signed-off-by: Michael Buesch <mb@bu3sch.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-09-09rt2x00: Hardcode TX ack timeout and consume timeIvo van Doorn
The calculated values for the ACK timeout and ACK consume time are different then the values as used by the Legacy drivers. After testing from James Ledwith it appeared that the calculated values caused a high amount of TX failures, and the values from the Legacy drivers were the most optimal to prevent TX failure due to excessive retries. The symptoms of this problem: - Rate control module always falls back to 1Mbs - Low throughput when bitrate was fixed Possible side-effects (not confirmed but highly likely) - Problems with DHCP - Broken connections due to lack of probe response This should fix at least: Kernel bugzilla reports: [13362], [13009], [9273] Fedora bugzilla reports: [443203] but possible some additional bugs as well. Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-09-09niu: Use resource_size instead of private functionTobias Klauser
The function res_size in drivers/net/niu.c is a copy of resource_size in linux/ioport.h. Remove the function and use resource_size instead. Signed-off-by: Tobias Klauser <tklauser@distanz.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-09-08b43: PCMCIA is not experimental anymoreMichael Buesch
PCMCIA support works well and is not experimental anymore. Signed-off-by: Michael Buesch <mb@bu3sch.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-09-08ath,ar9170: implemented conformance test limit calc. for tx powerJoerg Albert
apply the conformance test limits (CTL) stored in the eeprom upon the values calculated for the tx power (ar->power_*). This is based on the implementation in the vendor driver (hal/hpmain.c, line 3700 ff.) with one difference: If any ctl mode isn't found in the eeprom, we fall back to the "lower", legacy modes (5GHT20,11A or 2GHT20,11G,11B). Otus only did 5GHT20->11A. Currently CTL are applied for the FCC group only. Signed-off-by: Joerg Albert <jal2@gmx.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-09-08ath,ar9170: move CTL_ defines into regd.hJoerg Albert
The ar9170 driver needs the defines for conformance test limit groups and cannot include regd_common.h Signed-off-by: Joerg Albert <jal2@gmx.de> Acked-by: Luis R. Rodriguez <lrodriguez@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
generated by cgit v1.2.3 (git 2.39.1) at 2024-06-29 10:02:44 +0000