summaryrefslogtreecommitdiff
path: root/drivers
AgeCommit message (Collapse)Author
2011-12-16Merge branch 'drm-intel-fixes' of git://people.freedesktop.org/~keithp/linuxLinus Torvalds
* 'drm-intel-fixes' of git://people.freedesktop.org/~keithp/linux: drm/i915/dp: Dither down to 6bpc if it makes the mode fit drm/i915: enable semaphores on per-device defaults drm/i915: don't set unpin_work if vblank_get fails drm/i915: By default, enable RC6 on IVB and SNB when reasonable iommu: Export intel_iommu_enabled to signal when iommu is in use drm/i915/sdvo: Include LVDS panels for the IS_DIGITAL check drm/i915: prevent division by zero when asking for chipset power drm/i915: add PCH info to i915_capabilities drm/i915: set the right SDVO transcoder for CPT drm/i915: no-lvds quirk for ASUS AT5NM10T-I drm/i915: Treat pre-gen4 backlight duty cycle value consistently drm/i915: Hook up Ivybridge eDP drm/i915: add multi-threaded forcewake support
2011-12-16Merge branch 'gpio/merge' of git://git.secretlab.ca/git/linux-2.6Linus Torvalds
* 'gpio/merge' of git://git.secretlab.ca/git/linux-2.6: gpio: Fix DA9052 GPIO build errors. gpio: mpc8xxx: don't allow input-only pins to be output for MPC5121 gpio-ml-ioh: Add the irq_disable/irq_enable hooks for ml-ioh irq chip gpio-ml-ioh: fix a bug in the interrupt handler gpio: pl061: drop extra check for NULL platform_data
2011-12-16Merge branch 'for-linus' of git://git.kernel.dk/linux-blockLinus Torvalds
* 'for-linus' of git://git.kernel.dk/linux-block: block: don't kick empty queue in blk_drain_queue() block/swim3: Locking fixes loop: Fix discard_alignment default setting cfq-iosched: fix cfq_cic_link() race confition cfq-iosched: free cic_index if blkio_alloc_blkg_stats fails cciss: fix flush cache transfer length cciss: Add IRQF_SHARED back in for the non-MSI(X) interrupt handler loop: fix loop block driver discard and encryption comment block: initialize request_queue's numa node during
2011-12-16drm/i915/dp: Dither down to 6bpc if it makes the mode fitAdam Jackson
Some active adaptors (VGA usually) only have two lanes at 2.7GHz. That's a maximum pixel clock of 144MHz at 8bpc, but 192MHz at 6bpc. Fixes Asus UX31 panel being black at startup due to no valid modes since dc22ee6fc18ce0f15424e753e8473c306ece95c1. v2: Rebased to current code, resulting in the fix applying to EDP panels as well. Also changed from spatio-temporal to just spatial dithering on pre-ironlake, to be conssitent (and less visual flicker) Signed-off-by: Adam Jackson <ajax@redhat.com> Signed-off-by: Eric Anholt <eric@anholt.net> Tested-by: Eric Anholt <eric@anholt.net> Tested-by: Dirk Hohndel <hohndel@infradead.org> Signed-off-by: Keith Packard <keithp@keithp.com>
2011-12-16drm/i915: enable semaphores on per-device defaultsEugeni Dodonov
This adds a default setting for semaphores parameter, and enables semaphores by default on IVB. For now, as semaphores interaction with VTd causes random issues on SNB, we do not enable them by default. But they can still be enabled via the semaphores=1 kernel parameter. v2: enables semaphores on SNB when IO remapping is disabled, with base on Keith Packard patch. CC: Daniel Vetter <daniel.vetter@ffwll.ch> CC: Ben Widawsky <ben@bwidawsk.net> CC: Keith Packard <keithp@keithp.com> CC: Jesse Barnes <jbarnes@virtuousgeek.org> CC: Chris Wilson <chris@chris-wilson.co.uk> Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=42696 Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=40564 Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=41353 Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=38862 Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: Eugeni Dodonov <eugeni.dodonov@intel.com> Signed-off-by: Keith Packard <keithp@keithp.com>
2011-12-16drm/i915: don't set unpin_work if vblank_get failsJesse Barnes
This fixes a race where we may try to finish a page flip and decrement the refcount even if our vblank_get failed and we ended up with a spurious flip pending interrupt. Fixes https://bugs.freedesktop.org/show_bug.cgi?id=34211. Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org> Signed-off-by: Keith Packard <keithp@keithp.com>
2011-12-16drm/i915: By default, enable RC6 on IVB and SNB when reasonableKeith Packard
RC6 should always work on IVB, and should work on SNB whenever IO remapping is disabled. RC6 never works on Ironlake. Make the default value for the parameter follow these guidelines. Setting the value to either 0 or 1 will force the specified behavior. Signed-off-by: Keith Packard <keithp@keithp.com> Reviewed-by: Kenneth Graunke <kenneth@whitecape.org> Reviewed-by: Eugeni Dodonov <eugeni.dodonov@intel.com> Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=38567 Cc: Ted Phelps <phelps@gnusto.com> Cc: Peter <pab1612@gmail.com> Cc: Lukas Hejtmanek <xhejtman@fi.muni.cz> Cc: Andrew Lutomirski <luto@mit.edu>
2011-12-16iommu: Export intel_iommu_enabled to signal when iommu is in useEugeni Dodonov
In i915 driver, we do not enable either rc6 or semaphores on SNB when dmar is enabled. The new 'intel_iommu_enabled' variable signals when the iommu code is in operation. Cc: Ted Phelps <phelps@gnusto.com> Cc: Peter <pab1612@gmail.com> Cc: Lukas Hejtmanek <xhejtman@fi.muni.cz> Cc: Andrew Lutomirski <luto@mit.edu> CC: Daniel Vetter <daniel.vetter@ffwll.ch> Cc: Eugeni Dodonov <eugeni.dodonov@intel.com> Signed-off-by: Keith Packard <keithp@keithp.com>
2011-12-16drm/i915/sdvo: Include LVDS panels for the IS_DIGITAL checkChris Wilson
We were checking whether the supplied edid matched the connector it was read from. We do this in case a DDC read returns an EDID for another device on a multifunction or otherwise interesting card. However, we failed to include LVDS as a digital device and so rejecting an otherwise valid EDID. Fixes the detection of the secondary SDVO LVDS panel on the Libretto W105. Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Reviewed-by: Adam Jackson <ajax@redhat.com> Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=39216 Signed-off-by: Keith Packard <keithp@keithp.com>
2011-12-16drm/i915: prevent division by zero when asking for chipset powerEugeni Dodonov
This prevents an in-kernel division by zero which happens when we are asking for i915_chipset_val too quickly, or within a race condition between the power monitoring thread and userspace accesses via debugfs. The issue can be reproduced easily via the following command: while ``; do cat /sys/kernel/debug/dri/0/i915_emon_status; done This is particularly dangerous because it can be triggered by a non-privileged user by just reading the debugfs entry. This issue was also found independently by Konstantin Belousov <kostikbel@gmail.com>, who proposed a similar patch. Reported-by: Konstantin Belousov <kostikbel@gmail.com> Acked-by: Jesse Barnes <jbarnes@virtuousgeek.org> Acked-by: Keith Packard <keithp@keithp.com> Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: <stable@vger.kernel.org> Signed-off-by: Eugeni Dodonov <eugeni.dodonov@intel.com> Signed-off-by: Keith Packard <keithp@keithp.com>
2011-12-16drm/i915: add PCH info to i915_capabilitiesPaulo Zanoni
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by: Paulo Zanoni <paulo.r.zanoni@intel.com> Signed-off-by: Keith Packard <keithp@keithp.com>
2011-12-16drm/i915: set the right SDVO transcoder for CPTPaulo Zanoni
v2: add a CPT-specific macro, make code cleaner v3: fix commit message Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=41272 Cc: stable@kernel.org Signed-off-by: Paulo Zanoni <paulo.r.zanoni@intel.com> Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by: Keith Packard <keithp@keithp.com>
2011-12-16drm/i915: no-lvds quirk for ASUS AT5NM10T-IAdam Jackson
https://bugzilla.redhat.com/show_bug.cgi?id=750006 Signed-off-by: Adam Jackson <ajax@redhat.com> Signed-off-by: Keith Packard <keithp@keithp.com>
2011-12-15Merge branch 'linux-next' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/konrad/ibft * 'linux-next' of git://git.kernel.org/pub/scm/linux/kernel/git/konrad/ibft: ibft: Fix finding IBFT ACPI table on UEFI
2011-12-15Merge branch 'staging-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging * 'staging-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging: staging: r8712u: Add new USB ID staging: tidspbridge: request dmtimer clocks on init staging: tidspbridge: include module.h by default
2011-12-15Merge branch 'usb-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb * 'usb-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: USB: option: Removing one bogus and adding some new Huawei combinations USB: cdc-acm: add IDs for Motorola H24 HSPA USB module. usb: option: Add Huawei E398 controlling interfaces usb: renesas_usbhs: add hcd->has_tt for low/full speed usb: renesas_usbhs: typofix: irq_dtch control DTCHE usb: gadget: storage: release superspeed descriptors.
2011-12-15Merge branch 'stable/for-linus-fixes-3.2' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/konrad/xen * 'stable/for-linus-fixes-3.2' of git://git.kernel.org/pub/scm/linux/kernel/git/konrad/xen: xen/swiotlb: Use page alignment for early buffer allocation. xen: only limit memory map to maximum reservation for domain 0.
2011-12-15gpio: Fix DA9052 GPIO build errors.Ashish Jangam
This patch is functionally tested on Samsung SMDKV6410. Reported-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: David Dajun Chen <dchen@diasemi.com> Signed-off-by: Ashish Jangam <ashish.jangam@kpitcummins.com> [grant.likely: don't create an unnecessary header file] Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2011-12-15xen/swiotlb: Use page alignment for early buffer allocation.Konrad Rzeszutek Wilk
This fixes an odd bug found on a Dell PowerEdge 1850/0RC130 (BIOS A05 01/09/2006) where all of the modules doing pci_set_dma_mask would fail with: ata_piix 0000:00:1f.1: enabling device (0005 -> 0007) ata_piix 0000:00:1f.1: can't derive routing for PCI INT A ata_piix 0000:00:1f.1: BMDMA: failed to set dma mask, falling back to PIO The issue was the Xen-SWIOTLB was allocated such as that the end of buffer was stradling a page (and also above 4GB). The fix was spotted by Kalev Leonid which was to piggyback on git commit e79f86b2ef9c0a8c47225217c1018b7d3d90101c "swiotlb: Use page alignment for early buffer allocation" which: We could call free_bootmem_late() if swiotlb is not used, and it will shrink to page alignment. So alloc them with page alignment at first, to avoid lose two pages And doing that fixes the outstanding issue. CC: stable@kernel.org Suggested-by: "Kalev, Leonid" <Leonid.Kalev@ca.com> Reported-and-Tested-by: "Taylor, Neal E" <Neal.Taylor@ca.com> Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
2011-12-13staging: r8712u: Add new USB IDLarry Finger
Add USB ID for Sitecom WLA-2000 v1.001 WLAN. Reported-and-tested-by: Roland Gruber <post@rolandgruber.de> Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Cc: Stable <stable@vger.kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-12-13staging: tidspbridge: request dmtimer clocks on initOmar Ramirez Luna
Given that dm timer framework doesn't support request of clocks by soft | hard irqs because some recent changes, tidspbridge needs to request its clocks on init and enable/disable them on demand. This was first seen on 3.2-rc1. Signed-off-by: Omar Ramirez Luna <omar.ramirez@ti.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-12-13staging: tidspbridge: include module.h by defaultOmar Ramirez Luna
Fixes compilation break when compiled as part of the kernel: drivers/staging/tidspbridge/rmgr/drv_interface.c:134: error: expected declaration specifiers or '...' before string constant drivers/staging/tidspbridge/rmgr/drv_interface.c:134: warning: data definition has no type or storage class drivers/staging/tidspbridge/rmgr/drv_interface.c:134: warning: type defaults to 'int' in declaration of 'MODULE_AUTHOR' drivers/staging/tidspbridge/rmgr/drv_interface.c:134: warning: function declaration isn't a prototype drivers/staging/tidspbridge/rmgr/drv_interface.c:135: error: expected declaration specifiers or '...' before string constant drivers/staging/tidspbridge/rmgr/drv_interface.c:135: warning: data definition has no type or storage class drivers/staging/tidspbridge/rmgr/drv_interface.c:135: warning: type defaults to 'int' in declaration of 'MODULE_LICENSE' drivers/staging/tidspbridge/rmgr/drv_interface.c:135: warning: function declaration isn't a prototype drivers/staging/tidspbridge/rmgr/drv_interface.c:136: error: expected declaration specifiers or '...' before string constant drivers/staging/tidspbridge/rmgr/drv_interface.c:136: warning: data definition has no type or storage class drivers/staging/tidspbridge/rmgr/drv_interface.c:136: warning: type defaults to 'int' in declaration of 'MODULE_VERSION' drivers/staging/tidspbridge/rmgr/drv_interface.c:136: warning: function declaration isn't a prototype drivers/staging/tidspbridge/rmgr/drv_interface.c: In function 'omap34_xx_bridge_probe': drivers/staging/tidspbridge/rmgr/drv_interface.c:359: error: 'THIS_MODULE' undeclared (first use in this function) drivers/staging/tidspbridge/rmgr/drv_interface.c:359: error: (Each undeclared identifier is reported only once drivers/staging/tidspbridge/rmgr/drv_interface.c:359: error: for each function it appears in.) Signed-off-by: Omar Ramirez Luna <omar.ramirez@ti.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-12-13Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/sage/ceph-client * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/sage/ceph-client: ceph: add missing spin_unlock at ceph_mdsc_build_path() ceph: fix SEEK_CUR, SEEK_SET regression crush: fix mapping calculation when force argument doesn't exist ceph: use i_ceph_lock instead of i_lock rbd: remove buggy rollback functionality rbd: return an error when an invalid header is read ceph: fix rasize reporting by ceph_show_options
2011-12-13gpio: mpc8xxx: don't allow input-only pins to be output for MPC5121Wolfram Sang
Add a 5121-custom reject if an input-only pin is requested to be output (see 18.3.1.1 in the refman). Also, rewrite mach-specific quirk setup to consume less lines which scales better. Signed-off-by: Wolfram Sang <w.sang@pengutronix.de> [grant.likely: Fixed build error] Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2011-12-13gpio-ml-ioh: Add the irq_disable/irq_enable hooks for ml-ioh irq chipFeng Tang
These hooks will be needed by the general disabl/enable_irq(); Signed-off-by: Feng Tang <feng.tang@intel.com> Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2011-12-13gpio-ml-ioh: fix a bug in the interrupt handlerFeng Tang
GPIO's irq action's dev_id is set to the first struct ioh_gpio chip, so when loop checking the 8 chips, the "chip" should be changed according. Signed-off-by: Feng Tang <feng.tang@intel.com> Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2011-12-13gpio: pl061: drop extra check for NULL platform_dataRob Herring
In adding DT binding support, the check for NULL platform_data got added back in inadvertently, so remove it. Signed-off-by: Rob Herring <rob.herring@calxeda.com> Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2011-12-13USB: option: Removing one bogus and adding some new Huawei combinationsBjørn Mork
Huawei use the product code HUAWEI_PRODUCT_E353 (0x1506) for a number of different devices, which each can appear with a number of different descriptor sets. Different types of interfaces can be identified by looking at the subclass and protocol fields Subclass 1 protocol 8 is actually the data interface of a CDC ECM set, with subclass 1 protocol 9 as the control interface. Neither support serial data communcation, and cannot therefore be supported by this driver. At the same time, add a few other sets which appear if the device is configured in "Windows mode" using this modeswitch message: 55534243000000000000000000000011060000000100000000000000000000 Signed-off-by: Bjørn Mork <bjorn@mork.no> Cc: stable <stable@vger.kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-12-13ibft: Fix finding IBFT ACPI table on UEFIYinghai Lu
Found one system with UEFI/iBFT, kernel does not detect the iBFT during iscsi_ibft module loading. Root cause: on x86 (UEFI), we are calling of find_ibft_region() much earlier - specifically in setup_arch() before ACPI is enabled. Try to split acpi checking code out and call that later At that time ACPI iBFT already get permanent mapped with ioremap. So isa_virt_to_bus() will get wrong phys from right virt address. We could just skip that phys address printing. For legacy one, print the found address early. -v2: update comments and description according to Konrad. -v3: fix problem about module use case that is found by Konrad. -v4: use acpi_get_table() instead of acpi_table_parse() to handle module use case that is found by Konrad again.. Signed-off-by: Yinghai Lu <yinghai@kernel.org> Signed-off-by: Konrad Rzeszutek Wilk <konrad@kernel.org>
2011-12-12Merge branch 'hwmon-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging * 'hwmon-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging: hwmon: (jz4740) Staticise jz4740_hwmon_driver hwmon: (jz4740) fix signedness bug
2011-12-12Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/cjb/mmc * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/cjb/mmc: mmc: core: Fix deadlock when the CONFIG_MMC_UNSAFE_RESUME is not defined mmc: sdhci-s3c: Remove old and misprototyped suspend operations mmc: tmio: fix clock gating on platforms with a .set_pwr() method mmc: sh_mmcif: fix clock gating on platforms with a .down_pwr() method mmc: core: Fix typo at mmc_card_sleep mmc: core: Fix power_off_notify during suspend mmc: core: Fix setting power notify state variable for non-eMMC mmc: core: Add quirk for long data read time mmc: Add module.h include to sdhci-cns3xxx.c mmc: mxcmmc: fix falling back to PIO mmc: omap_hsmmc: DMA unmap only once in case of MMC error
2011-12-12USB: cdc-acm: add IDs for Motorola H24 HSPA USB module.Krzysztof Hałasa
Add USB IDs for Motorola H24 HSPA USB module. Signed-off-by: Krzysztof Hałasa <khalasa@piap.pl> Acked-by: Oliver Neukum <oneukum@suse.de> Cc: stable <stable@vger.kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-12-12usb: option: Add Huawei E398 controlling interfacesAlex Hermann
This patch adds the controlling interfaces for the Huawei E398. Thanks to Bjørn Mork <bjorn@mork.no> for extracting the interface numbers from the windows driver. Signed-off-by: Alex Hermann <alex@wenlex.nl> Cc: stable <stable@vger.kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-12-12hwmon: (jz4740) Staticise jz4740_hwmon_driverAxel Lin
It is not used outside this driver so no need to make the symbol global. Signed-off-by: Axel Lin <axel.lin@gmail.com> Acked-by: Lars-Peter Clausen <lars@metafoo.de> Signed-off-by: Guenter Roeck <guenter.roeck@ericsson.com>
2011-12-12hwmon: (jz4740) fix signedness bugAxel Lin
wait_for_completion_interruptible_timeout() may return negative value. In this case, checking if (t > 0) will return true if t is unsigned. Signed-off-by: Axel Lin <axel.lin@gmail.com> Acked-by: Lars-Peter Clausen <lars@metafoo.de> Cc: stable@kernel.org (3.0+) Signed-off-by: Guenter Roeck <guenter.roeck@ericsson.com>
2011-12-12block/swim3: Locking fixesBenjamin Herrenschmidt
The old PowerMac swim3 driver has some "interesting" locking issues, using a private lock and failing to lock the queue before completing requests, which triggered WARN_ONs among others. This rips out the private lock, makes everything operate under the block queue lock, and generally makes things simpler. We used to also share a queue between the two possible instances which was problematic since we might pick the wrong controller in some cases, so make the queue and the current request per-instance and use queuedata to point to our private data which is a lot cleaner. We still share the queue lock but then, it's nearly impossible to actually use 2 swim3's simultaneously: one would need to have a Wallstreet PowerBook, the only machine afaik with two of these on the motherboard, and populate both hotswap bays with a floppy drive (the machine ships only with one), so nobody cares... While at it, add a little fix to clear up stale interrupts when loading the driver or plugging a floppy drive in a bay. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2011-12-12usb: renesas_usbhs: add hcd->has_tt for low/full speedKuninori Morimoto
Low/Full speed device is not recognized without this patch Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2011-12-12usb: renesas_usbhs: typofix: irq_dtch control DTCHEKuninori Morimoto
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2011-12-12usb: gadget: storage: release superspeed descriptors.Yu Xu
Release superspeed mass storage descriptors memory when the function is unbind. Signed-off-by: Yu Xu <yuxu@marvell.com> Acked-by: Michal Nazarewicz <mina86@mina86.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2011-12-10mmc: core: Fix deadlock when the CONFIG_MMC_UNSAFE_RESUME is not definedSujit Reddy Thumma
mmc_suspend_host() tries to claim host during suspend and release it only when the bus suspend operation is compeleted. If CONFIG_MMC_UNSAFE_RESUME is defined and the host is flagged as removable, mmc_suspend_host() tries to remove the card. In this process, the file system sync can get blocked trying to acquire host which is already claimed by mmc_suspend_host() causing deadlock. Fix this deadlock by releasing host before ->remove() is called. Signed-off-by: Sujit Reddy Thumma <sthumma@codeaurora.org> Acked-by: Ulf Hansson <ulf.hansson@stericsson.com> Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Chris Ball <cjb@laptop.org>
2011-12-10mmc: sdhci-s3c: Remove old and misprototyped suspend operationsMark Brown
Now that the driver is using dev_pm_ops the suspend operations in the platform_driver structure won't get called so don't need to be there, and certainly shouldn't be the same function as dev_pm_ops since the signatures are different. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Jaehoon Chung <jh80.chung@samsung.com> Signed-off-by: Chris Ball <cjb@laptop.org>
2011-12-10mmc: tmio: fix clock gating on platforms with a .set_pwr() methodGuennadi Liakhovetski
Do not power down the card in .set_ios(), unless MMC_POWER_OFF is requested. This fixes the SDHI functionality on ecovec. Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Signed-off-by: Chris Ball <cjb@laptop.org>
2011-12-10mmc: sh_mmcif: fix clock gating on platforms with a .down_pwr() methodGuennadi Liakhovetski
Do not power down the card in .set_ios(), unless MMC_POWER_OFF is requested. This fixes the MMCIF interface functionality on ecovec boards. Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Signed-off-by: Chris Ball <cjb@laptop.org>
2011-12-10mmc: core: Fix typo at mmc_card_sleepKyungmin Park
Fix wrong bus_ops->sleep check. (This isn't expected to have real-world consequences, because the mmc core always defines both 'awake' and 'sleep' ops.) Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Chris Ball <cjb@laptop.org>
2011-12-10mmc: core: Fix power_off_notify during suspendGirish K S
The eMMC 4.5 devices respond to only RESET and AWAKE command in the sleep state. Hence the mmc switch command to notify power off state should be sent before the device enters sleep state. This patch fixes the same. Signed-off-by: Girish K S <girish.shivananjappa@linaro.org> Signed-off-by: Chris Ball <cjb@laptop.org>
2011-12-10mmc: core: Fix setting power notify state variable for non-eMMCGirish K S
This patch skips the setting of the power notify state variable for non eMMC 4.5 devices. Also fixes the problem of omap_hsmmc noisy/broken for suspend resume reported by Kevin Hilman. Signed-off-by: Girish K S <girish.shivananjappa@linaro.org> Acked-by: Ulf Hansson <ulf.hansson@stericsson.com> Signed-off-by: Chris Ball <cjb@laptop.org>
2011-12-10mmc: core: Add quirk for long data read timeStefan Nilsson XK
Adds a quirk that sets the data read timeout to a fixed value instead of relying on the information in the CSD. The timeout value chosen is 300ms since that has proven enough for the problematic cards found, but could be increased if other cards require this. This patch also enables this quirk for certain Micron cards known to have this problem. Signed-off-by: Stefan Nilsson XK <stefan.xk.nilsson@stericsson.com> Signed-off-by: Ulf Hansson <ulf.hansson@stericsson.com> Acked-by: Linus Walleij <linus.walleij@linaro.org> Cc: <stable@kernel.org> Signed-off-by: Chris Ball <cjb@laptop.org>
2011-12-10mmc: Add module.h include to sdhci-cns3xxx.cChris Ball
Fixes: drivers/mmc/host/sdhci-cns3xxx.c:110: error: 'THIS_MODULE' undeclared here (not in a function) Reported-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Chris Ball <cjb@laptop.org>
2011-12-10mmc: mxcmmc: fix falling back to PIOSascha Hauer
When we can't configure the dma channel we want to fall back to PIO. We do this by setting host->do_dma to zero. This does not work as do_dma is used to see whether dma can be used for the current transfer. Instead, we have to set host->dma to NULL. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Cc: <stable@kernel.org> Signed-off-by: Chris Ball <cjb@laptop.org>
2011-12-09Merge branch 'spi/for-3.2' of git://git.pengutronix.de/git/wsa/linux-2.6Linus Torvalds
* 'spi/for-3.2' of git://git.pengutronix.de/git/wsa/linux-2.6: spi/gpio: fix section mismatch warning spi/fsl-espi: disable CONFIG_SPI_FSL_ESPI=m build spi/nuc900: Include linux/module.h spi/ath79: fix compile error due to missing include