summaryrefslogtreecommitdiff
path: root/drivers
AgeCommit message (Collapse)Author
2009-05-03sh: Consolidate MTU2/CMT/TMU timer platform data.Paul Mundt
All of the SH timers use a roughly identical structure for platform data, which presently is broken out for each block. Consolidate all of these definitions, as there is no reason for them to be broken out in the first place. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-05-03clocksource: SuperH TMU Timer driverMagnus Damm
This patch adds a TMU driver for the SuperH architecture. The TMU driver is a platform driver with early platform support to allow using a TMU channel as clockevent or clocksource during system bootup or later. Clocksource or clockevent can be selected. Both periodic and oneshot clockevents are supported. Signed-off-by: Magnus Damm <damm@igel.co.jp> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-05-03clocksource: SuperH MTU2 Timer driverMagnus Damm
This patch adds a MTU2 driver for the SuperH architecture. The MTU2 driver is a platform driver with early platform support to allow using a MTU2 channel as only clockevent during system bootup. Clocksource on sh2a is currently unsupported due to code generation issues with 64-bit math, so at this point only periodic clockevent support is in place. Signed-off-by: Magnus Damm <damm@igel.co.jp> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-05-03Merge branch 'timers/clocksource' of ↵Paul Mundt
git://git.kernel.org/pub/scm/linux/kernel/git/x86/linux-2.6-tip
2009-04-29Merge branch 'for_linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-2.6 * 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-2.6: V4L/DVB (11652): au0828: fix kernel oops regression on USB disconnect. V4L/DVB (11626): cx23885: Two fixes for DViCO FusionHDTV DVB-T Dual Express V4L/DVB (11612): mx3_camera: Fix compilation with CONFIG_PM V4L/DVB (11570): patch: s2255drv: fix race condition on set mode V4L/DVB (11568): cx18: Fix the handling of i2c bus registration error V4L/DVB (11561a): move media after i2c V4L/DVB (11516): drivers/media/video/saa5246a.c: fix use-after-free V4L/DVB (11515): drivers/media/video/saa5249.c: fix use-after-free and leak V4L/DVB (11494a): cx231xx Kconfig fixes V4L/DVB (11494): cx18: Send correct input routing value to external audio multiplexers
2009-04-30clocksource: sh_cmt 16-bit fixesMagnus Damm
This patch contains various fixes for 16-bit cmt hardware. With this applied periodic clockevents work fine on sh7203. Signed-off-by: Magnus Damm <damm@igel.co.jp> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-04-29V4L/DVB (11652): au0828: fix kernel oops regression on USB disconnect.Devin Heitmueller
A regression was introduced in hg changeset 33810c734a0d, which resulted in a kernel panic whenever the device was disconnected from USB. The call to 4l2_device_register() was overwriting the pointer for usb_set_intfdata(), so when au0828_usb_disconnect() was called, the usb_get_intfdata() returned a pointer to the v4l2_device instead of the au0828_dev structure. Signed-off-by: Devin Heitmueller <dheitmueller@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-04-29V4L/DVB (11626): cx23885: Two fixes for DViCO FusionHDTV DVB-T Dual ExpressChristopher Pascoe
Two fixes for DViCO FusionHDTV DVB-T Dual Express: * Reset correct tuner when reinitializing xc3028. * Disable the I2C gate control to avoid locking up the I2C bus. Tested-by: John Knops <jknops@australiaonline.net.au> Reviewed-by: Steven Toth <stoth@linuxtv.org> Signed-off-by: Christopher Pascoe <linuxdvb@itee.uq.edu.au> Signed-off-by: Devin Heitmueller <dheitmueller@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-04-29V4L/DVB (11612): mx3_camera: Fix compilation with CONFIG_PMSascha Hauer
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-04-29V4L/DVB (11570): patch: s2255drv: fix race condition on set modeDean Anderson
set_modeready flag must be set before command sent to USB in s2255_write_config. Signed-off-by: Dean Anderson <dean@sensoray.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-04-29V4L/DVB (11568): cx18: Fix the handling of i2c bus registration errorJean Delvare
* Return actual error values as returned by the i2c subsystem, rather than 0 or 1. * If the registration of the second bus fails, unregister the first one before exiting, otherwise we are leaking resources. Signed-off-by: Jean Delvare <khali@linux-fr.org> Acked-by: Andy Walls <awalls@radix.net> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-04-29V4L/DVB (11561a): move media after i2cGuennadi Liakhovetski
Currently drivers/media drivers are linked very early - directly after base, block, misc, and mfd and before ata, scsi, ide, input, firewire, usb, and i2c. This breaks static build of video4linux drivers, that use generic CPU i2c adapter drivers and the v4l2-subdev subsystem, because during video4linux probing the v4l2-subdev core requires a struct i2c_adapter context, which cannot be satisfied before the i2c subsystem is initialised. Moving drivers/media after drivers/i2c fixes this problem. The best way to trigger action is by submitting a patch:-) So, let's see what comes out of it - on the one hand I don't see any reason why media has to be linked this early, and nobody was able to give me one yesterday as this problem has been discussed on linux-media, OTOH, maybe indeed it would be better to move i2c the whole way up above media, but that'd be much bigger of a change, I think. -- To unsubscribe from this list: send the line "unsubscribe linux-media" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Acked-by: Jean Delvare <khali@linux-fr.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-04-29V4L/DVB (11516): drivers/media/video/saa5246a.c: fix use-after-freeDan Carpenter
I lowered the kfree(t) down a couple lines and removed the superflous "t->vdev = NULL;" Signed-off-by: Dan Carpenter <error27@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-04-29V4L/DVB (11515): drivers/media/video/saa5249.c: fix use-after-free and leakDan Carpenter
I moved the kfree() down a couple lines. t->vdev is going to be in freed memory so there is no point setting it to NULL. I added a kfree(t) on a Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-04-29V4L/DVB (11494a): cx231xx Kconfig fixesMauro Carvalho Chehab
selecting ALSA module breaks if !SND. Just remove select. While here, let's fix the whitespacing at the Kconfig. Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-04-29V4L/DVB (11494): cx18: Send correct input routing value to external audio ↵Andy Walls
multiplexers A late v4l2_subdev framework change accidentally sent the audio input routing value to the external multiplexer, instead of the muxer input routing value to the external multiplexer. This change corrects that error. Signed-off-by: Andy Walls <awalls@radix.net> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-04-29Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6Linus Torvalds
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6: (24 commits) e100: do not go D3 in shutdown unless system is powering off netfilter: revised locking for x_tables Bluetooth: Fix connection establishment with low security requirement Bluetooth: Add different pairing timeout for Legacy Pairing Bluetooth: Ensure that HCI sysfs add/del is preempt safe net: Avoid extra wakeups of threads blocked in wait_for_packet() net: Fix typo in net_device_ops description. ipv4: Limit size of route cache hash table Add reference to CAPI 2.0 standard Documentation/isdn/INTERFACE.CAPI update Documentation/isdn/00-INDEX ixgbe: Fix WoL functionality for 82599 KX4 devices veth: prevent oops caused by netdev destructor xfrm: wrong hash value for temporary SA forcedeth: tx timeout fix net: Fix LL_MAX_HEADER for CONFIG_TR_MODULE mlx4_en: Handle page allocation failure during receive mlx4_en: Fix cleanup flow on cq activation vlan: update vlan carrier state for admin up/down netfilter: xt_recent: fix stack overread in compat code ...
2009-04-28e100: do not go D3 in shutdown unless system is powering offThadeu Lima de Souza Cascardo
After experimenting with kexec with the last merges after 2.6.29, I've had some problems when probing e100. It would not read the eeprom. After some bisects, I realized this has been like that since forever (at least 2.6.18). The problem is that shutdown is doing the same thing that suspend does and puts the device in D3 state. I couldn't find a way to get the device back to a sane state in the probe function. So, based on some similar patches from Rafael J. Wysocki for e1000, e1000e, and ixgbe, I wrote this one for e100. Signed-off-by: Thadeu Lima de Souza Cascardo <cascardo@holoscopio.com> Acked-by: "Rafael J. Wysocki" <rjw@sisk.pl> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-04-28Merge branch 'drm-intel-next' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/anholt/drm-intel * 'drm-intel-next' of git://git.kernel.org/pub/scm/linux/kernel/git/anholt/drm-intel: drm/i915: fix up error path leak in i915_cmdbuffer drm/i915: fix unpaired i915 device mutex on entervt failure. drm/i915: add support for G41 chipset drm/i915: Enable ASLE if present drm/i915: Unregister ACPI video driver when exiting drm/i915: Register ACPI video even when not modesetting drm/i915: fix transition to I915_TILING_NONE drm/i915: Don't let an oops get triggered from irq_emit without dma init. drm/i915: allow tiled front buffers on 965+
2009-04-28Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/roland/infiniband * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/roland/infiniband: (21 commits) RDMA/nes: Update iw_nes version RDMA/nes: Fix error path in nes_accept() RDMA/nes: Fix hang issues for large cluster dynamic connections RDMA/nes: Increase rexmit timeout interval RDMA/nes: Check for sequence number wrap-around RDMA/nes: Do not set apbvt entry for loopback RDMA/nes: Fix unused variable compile warning when INFINIBAND_NES_DEBUG=n RDMA/nes: Fix fw_ver in /sys RDMA/nes: Set trace length to 1 inch for SFP_D RDMA/nes: Enable repause timer for port 1 RDMA/nes: Correct CDR loop filter setting for port 1 RDMA/nes: Modify thermo mitigation to flip SerDes1 ref clk to internal RDMA/nes: Fix resource issues in nes_create_cq() and nes_destroy_cq() RDMA/nes: Remove root_256()'s unused pbl_count_256 parameter mlx4_core: Fix memory leak in mlx4_enable_msi_x() IB/mthca: Fix timeout for INIT_HCA and a few other commands RDMA/cxgb3: Don't zero QP attrs when moving to IDLE RDMA/nes: Fix bugs in nes_reg_phys_mr() RDMA/nes: Fix compiler warning at nes_verbs.c:1955 IPoIB: Disable NAPI while CQ is being drained ...
2009-04-28Merge branch 'for-linus' of git://git.kernel.dk/linux-2.6-blockLinus Torvalds
* 'for-linus' of git://git.kernel.dk/linux-2.6-block: bio: fix memcpy corruption in bio_copy_user_iov() hd: fix locking mg_disk: fix CONFIG_LBD=y warning mg_disk: fix locking
2009-04-28Merge branches 'cxgb3', 'ipoib', 'mthca', 'mlx4' and 'nes' into for-linusRoland Dreier
2009-04-28hd: fix lockingTejun Heo
hd dance around local irq and HD_IRQ enable without achieving much. It ends up transferring data from irq handler with both local irq and HD_IRQ disabled. The only place it actually does something is while transferring the first block of a request which it does with HD_IRQ disabled but local irq enabled. Unfortunately, the dancing is horribly broken from locking POV. IRQ and timeout handlers access block queue without grabbing the queue lock and running the driver in SMP configuration crashes the whole machine pretty quickly. Remove meaningless irq enable/disable dancing and add proper locking in issue, irq and timeout paths. Signed-off-by: Tejun Heo <tj@kernel.org>
2009-04-28mg_disk: fix CONFIG_LBD=y warningBartlomiej Zolnierkiewicz
drivers/block/mg_disk.c: In function ‘mg_dump_status’: drivers/block/mg_disk.c:265: warning: format ‘%ld’ expects type ‘long int’, but argument 2 has type ‘sector_t’ [ Impact: kill build warning ] Cc: unsik Kim <donari75@gmail.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com> Signed-off-by: Tejun Heo <tj@kernel.org>
2009-04-28mg_disk: fix lockingTejun Heo
IRQ and timeout handlers call functions which expect locked queue lock without locking it. Fix it. While at it, convert 0s used as null pointer constant to NULLs. [ Impact: fix locking, cleanup ] Signed-off-by: Tejun Heo <tj@kernel.org> Cc: unsik Kim <donari75@gmail.com>
2009-04-28regulator: Fix default constraints for fixed voltage regulatorsMark Brown
Default voltage constraints were being provided for fixed voltage regulator where board constraints were not provided but these constraints used INT_MIN as the default minimum voltage which is not a valid value since it is less than zero. Use 1uV instead. Also set the default values we set in the constraints themselves since otherwise the max_uV constraint we determine will not be stored in the actual constraint strucutre and will therefore not be used. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
2009-04-28regulator/bq24022: fix bug in is_enabled functionPhilipp Zabel
This seems to be fallout from last October's regulator core rework. It got noticed only because of recent regulator framework changes. Signed-off-by: Philipp Zabel <philipp.zabel@gmail.com> Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
2009-04-28regulator/virtual: fix strings compare predicatesMike Rapoport
Signed-off-by: Mike Rapoport <mike@compulab.co.il> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
2009-04-28regulator core: fix double-free in regulator_register() error pathPaul Walmsley
During regulator registration, any error after device_register() will cause a double-free on the struct regulator_dev 'rdev'. The bug is in drivers/regulator/core.c:regulator_register(): ... scrub: device_unregister(&rdev->dev); clean: kfree(rdev); <--- rdev = ERR_PTR(ret); goto out; ... device_unregister() calls regulator_dev_release() which frees rdev. The subsequent kfree corrupts memory and causes some OMAP3 systems to oops on boot in regulator_get(). Applies against 2.6.30-rc3. Signed-off-by: Paul Walmsley <paul@pwsan.com> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
2009-04-28drivers/regulator: fix when type is different from REGULATOR_VOLTAGE or ↵Diego Liziero
REGULATOR_CURRENT When regulator_desc->type is something different from REGULATOR_VOLTAGE or REGULATOR_CURRENT the if should probably return ERR_PTR(-EINVAL) The semantic patch that makes this change is as follows: (http://www.emn.fr/x-info/coccinelle/) @@ expression E; constant C; @@ ( - !E == C + E != C ) Signed-off-by: Diego Liziero <diegoliz@gmail.com> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
2009-04-28unreachable code in drms_uA_update()Dan Carpenter
I removed the extra semi-colon and indented the return statement. The unreachable code was found by smatch (http://repo.or.cz/w/smatch.git). The patch was compile tested. regards, dan carpenter Signed-off-by: Dan Carpenter <error27@gmail.com> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
2009-04-28sh: setup timers in late_time_init()Magnus Damm
This patch moves the SuperH timer setup code from time_init() to late_time_init(). Good things about this change: - interrupts: they are enabled at late_time_init() - mm: regular kmalloc() can be used at late_time_init() Together with moving to late_time_init() this patch changes the sh_cmt driver to always allocate with kmalloc(). This simplifies the code a bit and also fixes section mismatches. Signed-off-by: Magnus Damm <damm@igel.co.jp> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-04-28clocksource: improve sh_cmt clocksource overflow handlingMagnus Damm
This patch improves the sh_cmt clocksource handling. Currently the counter value is ignored in the case of overflow. With this patch the overflow flag is read before and after reading the counter, removing any counter value and overflow flag mismatch issues. Signed-off-by: Magnus Damm <damm@igel.co.jp> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-04-27RDMA/nes: Update iw_nes versionChien Tung
Update version number to 1.5.0.0 Signed-off-by: Chien Tung <chien.tin.tung@intel.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2009-04-27RDMA/nes: Fix error path in nes_accept()Faisal Latif
If reg_phys_mem() fails, we need to free memory allocated for MPA frame with private data before returning the error. Also move nes_add_ref() after the reg_phys_mem() is successful. Signed-off-by: Faisal Latif <faisal.latif@intel.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2009-04-27RDMA/nes: Fix hang issues for large cluster dynamic connectionsFaisal Latif
Running large cluster setup, we are hanging after many hours of testing. Fixing this required going over the code and making sure the rexmit entry was properly removed based on the cm_node's state and packet received. Also when receiving a FIN packet, check seq# and make sure there were no errors before calling handle_fin(). Following are the changes done in nes_cm.c: * handle_ack_pkt() needs to return error value, so in case of error, handle_fin() is not called. Some cleanup done while going over the code. * handle_rst_pkt(), handling of cm_node's NES_CM_STATE_LAST_ACK is missing. * process_packet(), in case of FIN only packet is received, call check_seq() before processing. * in handle_fin_pkt(), we are calling cleanup_retrans_entry() for all conditions, even if the packets need to be dropped. Signed-off-by: Faisal Latif <faisal.latif@intel.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2009-04-27RDMA/nes: Increase rexmit timeout intervalFaisal Latif
Under heavy load with large cluster testing, it may take longer to receive a response to MPA requests. Change the driver to wait longer after each rexmit to max time value. Signed-off-by: Faisal Latif <faisal.latif@intel.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2009-04-27RDMA/nes: Check for sequence number wrap-aroundFaisal Latif
check_seq() was not checking if the seq#s have wrapped. Fix it. Signed-off-by: Faisal Latif <faisal.latif@intel.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2009-04-27RDMA/nes: Do not set apbvt entry for loopbackFaisal Latif
When a connect request comes, apbvt should only be set for non-loopback connections. Signed-off-by: Faisal Latif <faisal.latif@intel.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2009-04-27RDMA/nes: Fix unused variable compile warning when INFINIBAND_NES_DEBUG=nChien Tung
Remove the NES_DEBUG that is causing the compile warning about an unused variable when INFINIBAND_NES_DEBUG is not enabled. Signed-off-by: Chien Tung <chien.tin.tung@intel.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2009-04-27RDMA/nes: Fix fw_ver in /sysChien Tung
/sys/class/infiniband/nes?/fw_ver is not displaying firmware version properly (it shows 0.0.0 with the current code). Fill in the correct firmware version number. Signed-off-by: Chien Tung <chien.tin.tung@intel.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2009-04-27RDMA/nes: Set trace length to 1 inch for SFP_DChien Tung
With updated PHY firmware for SFP_D, setting the trace length to 1 inch for SFP_D provides a more stable link. Signed-off-by: Chien Tung <chien.tin.tung@intel.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2009-04-27RDMA/nes: Enable repause timer for port 1Chien Tung
Enable repause timer for port 1. Without this setting, under stress, the chip may misbehave. Signed-off-by: Chien Tung <chien.tin.tung@intel.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2009-04-27RDMA/nes: Correct CDR loop filter setting for port 1Chien Tung
In commit 1b949324 ("RDMA/nes: Fix SFP+ PHY initialization") there is a mistake in the clean up code that removed port 1 CDR loop filter settings for 10G cards other than CX4. Put the correct setting back for appropriate PHY types. Signed-off-by: Chien Tung <chien.tin.tung@intel.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2009-04-27RDMA/nes: Modify thermo mitigation to flip SerDes1 ref clk to internalChien Tung
Change thermo mitigation code to flip the SerDes1 reference clock to internal, to match the change in commit a4849fc1 ("RDMA/nes: Add wide_ppm_offset parm for switch compatibility"). Signed-off-by: Chien Tung <chien.tin.tung@intel.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2009-04-27Revert "linux.conf.au 2009: Tuz"Linus Torvalds
This reverts commit 8032b526d1a3bd91ad633dd3a3b5fdbc47ad54f1. Hey, it was only meant to be a single release. Now they can all die as far as I'm concerned. [ Just kidding. They're cute and cuddly. Except when they have horrible nasty facial diseases. Oh, and I guess they're not actually that cuddly even when disease-free. ] Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-04-27Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/jbarnes/pci-2.6 * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jbarnes/pci-2.6: PCI: only save/restore existent registers in the PCIe capability x86/PCI: don't bother with root quirks if _CRS is used docbooks: add/fix PCI kernel-doc PCI: cleanup debug output resources x86/PCI: set_pci_bus_resources_arch_default cleanups x86/PCI: Move set_pci_bus_resources_arch_default into arch/x86 x86/PCI: don't call e820_all_mapped with -1 in the mmconfig case PCI quirk: disable MSI on VIA VT3364 chipsets
2009-04-27Documentation/isdn/INTERFACE.CAPITilman Schmidt
isdn: document Kernel CAPI driver interface Create a file Documentation/isdn/INTERFACE.CAPI describing the interface between the kernel CAPI subsystem and ISDN device drivers, analogous to the existing Documentation/isdn/INTERFACE for the old isdn4linux subsystem. Also add kerneldoc comments to the exported functions in drivers/isdn/capi/kcapi.c. Impact: Documentation Signed-off-by: Tilman Schmidt <tilman@imap.cc> Signed-off-by: Karsten Keil <keil@b1-systems.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-04-27ixgbe: Fix WoL functionality for 82599 KX4 devicesWaskiewicz Jr, Peter P
The current code writes the PME enabled bit in PCI config space which is wrong. This was needed for pre-release hardware, and was not removed from the driver. Also, we need to clear the WUS (wake up status) after we resume. Otherwise we can't wake for the same event again since it's still asserted in the hardware. Plus, the multicast lists were being written improperly, causing multicast WoL to fail. Signed-off-by: Peter P Waskiewicz Jr <peter.p.waskiewicz.jr@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-04-27veth: prevent oops caused by netdev destructorStephen Hemminger
From: Stephen Hemminger <shemminger@vyatta.com> The veth driver will oops if sysfs hooks are open while module is removed. The net device destructor can not point to code in a module; basically there are only two possible safe values: NULL - no destructor, or free_netdev - free on last use Signed-off-by: David S. Miller <davem@davemloft.net>
generated by cgit v1.2.3 (git 2.39.1) at 2024-11-03 22:29:28 +0000