summaryrefslogtreecommitdiff
path: root/drivers
AgeCommit message (Collapse)Author
2009-07-26igb: change configure_pcs_link to void since it always returns 0Alexander Duyck
Since igb_configure_pcs_link always returns 0 there isn't really much point to checking for the result so it is best just to change this to a void so we can properly ignore the return result. Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-07-26igb: make serdes power down available for 82575 in addition to 82576 partsAlexander Duyck
There was a serdes power down workaround that was originally added for 82576 fiber. However it has also been found that this workaround is needed for serdes connections as well. In addition it is also needed for 82575 serdes so we we need to remove the checks restricting it to 82576. Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-07-26igb: remove media type fiber as it is misleadingAlexander Duyck
The current igb driver only supports copper and serdes. The fiber media type is a holdover from earlier NICs as the current nics supported by igb all use serdes when communicating over a fiber connection. As a result we can remove media type fiber without losing any functionality. Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-07-25mISDN: hfcmulti display real PCI ids for not supported cardsKarsten Keil
In the PCI probe function struct pci_device_id points to the matched entry of the ID table, but for devices which are matched with PCI_ANY_ID sub IDs we want display the IDs of the device itself. Signed-off-by: Karsten Keil <keil@b1-systems.de>
2009-07-25ISDN: ARRAY_SIZE changesKarsten Keil
These changes were a direct result of using a semantic patch More information can be found at http://www.emn.fr/x-info/coccinelle/ Modified some of the changes to avoid the extra define. Signed-off-by: Stoyan Gaydarov <sgayda2@uiuc.edu> Signed-off-by: Karsten Keil <keil@b1-systems.de>
2009-07-25drivers/isdn: Drop unnecessary NULL testJulia Lawall
The result of container_of should not be NULL. In particular, in this case the argument to the enclosing function has passed though INIT_WORK, which dereferences it, implying that its container cannot be NULL. A simplified version of the semantic patch that makes this change is as follows: (http://www.emn.fr/x-info/coccinelle/) // <smpl> @@ identifier fn,work,x,fld; type T; expression E1,E2; statement S; @@ static fn(struct work_struct *work) { ... when != work = E1 x = container_of(work,T,fld) ... when != x = E2 - if (x == NULL) S ... } // </smpl> Signed-off-by: Julia Lawall <julia@diku.dk> Signed-off-by: Karsten Keil <keil@b1-systems.de>
2009-07-25mISDN: Add support for Traverse Technologies NETJet PCI cardsKarsten Keil
Add support for cards based on the Tiger 300 and Tiger 320 ISDN PCI chip. Currently only the ISAC ISDN line interface is supported. Signed-off-by: Karsten Keil <keil@b1-systems.de>
2009-07-25mISDN: Add driver for Winbond cardsKarsten Keil
Add driver for Winbond W6692 based PCI cards. Signed-off-by: Karsten Keil <keil@b1-systems.de>
2009-07-25mISDN: Add support for Speedfax+ cardsKarsten Keil
Add support for the Siemens ISAR DSP chip and cards based on it, including analog modem protocols. Signed-off-by: Karsten Keil <keil@b1-systems.de>
2009-07-25mISDN: Driver for AVM Fritz!CARD PCIKarsten Keil
Add mISDN driver for AVM FRITZ!CARD PCI (all versions). Signed-off-by: Karsten Keil <keil@b1-systems.de>
2009-07-25mISDN: Add driver for Infineon ISDN chipset familyKarsten Keil
This driver supports cards with Infineon ISAC/HSCX, ISACX, IPAC and IPACX chips from various manufacturers. Signed-off-by: Karsten Keil <keil@b1-systems.de>
2009-07-25mISDN: Make clearing B-channel a common functionKarsten Keil
Clearing B-channel is needed in every driver, so it makes sense to have it as common function. Signed-off-by: Karsten Keil <keil@b1-systems.de>
2009-07-25ISDN: Fix isdnhdlc for one byte hdlc packetsKarsten Keil
Normally HDLC packets contain more as one byte (e.g a X25/X75 header). But if you use plain HDLC framing, the current code do not encode 1 byte payloads, this patch fix that. Signed-off-by: Karsten Keil <keil@b1-systems.de>
2009-07-25ISDN: Add support for none reverse bitstreams to isdnhdcKarsten Keil
The original isdnhdlc code was developed for devices which had reversed bitorder in the byte stream. Adding code to handle normal bitstreams as well. Signed-off-by: Karsten Keil <keil@b1-systems.de>
2009-07-25ISDN: Clean up isdnhdlc codeKarsten Keil
Clean up isdnhdlc to meet current code standard. Remove hint to already removed bit reversal table. Signed-off-by: Karsten Keil <keil@b1-systems.de>
2009-07-25ISDN: Make isdnhdlc usable for other ISDN driversKarsten Keil
isdnhdlc is useful for other ISDN drivers as well. Move the include file to a central location and the source to the central isdn location. Signed-off-by: Karsten Keil <keil@b1-systems.de>
2009-07-24adm8211: remove uneeded code during suspend/resumeLuis R. Rodriguez
mac80211 drivers do not need to stop the software queues or call their own stop() callback upon suspend as we do it for drivers. Equally drivers don't have to call their own start() or start the queues as mac80211 will do it for us. Signed-off-by: Luis R. Rodriguez <lrodriguez@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-07-24ath9k: do not stop the queues in driver stopLuis R. Rodriguez
mac80211 will have disabled the queues for us when needed. Signed-off-by: Luis R. Rodriguez <lrodriguez@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-07-24wl1251: remove wl1251_plt_start/stop()Kalle Valo
This Production Line Testing code is currently unused and can be removed. It can be reintroduced when nl80211 test mode implemented for the driver. Signed-off-by: Kalle Valo <kalle.valo@nokia.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-07-24wl1251: remove accidentally added wl1251_netlink.cKalle Valo
Commit "wl1251: add wl1251 prefix to all 1251 files" accidentally added wl1251_netlink.c which contains a private netlink interface. Signed-off-by: Kalle Valo <kalle.valo@nokia.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-07-24ath5k: fix values for bus error bits in ISR2Pavel Roskin
The new values are taken from the recently open sourced Atheros HAL. Correctness is also confirmed by the users with access to Atheros documentation. Signed-off-by: Pavel Roskin <proski@gnu.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-07-24iwmc3200wifi: fix a use-after-free bugZhu Yi
The patch fixes a use-after-free bug for cmd->seq_num; Reported-by: Dan Carpenter <error27@gmail.com> Signed-off-by: Zhu Yi <yi.zhu@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-07-24iwmc3200wifi: fix cfg80211_connect_result is called in IBSSZhu Yi
Avoid calling cfg80211_connect_result() in IBSS mode. Signed-off-by: Zhu Yi <yi.zhu@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-07-24iwmc3200wifi: use cfg80211_connect_result to send req/resp IEZhu Yi
cfg80211_connect_result() let us specify associate request and response IEs as parameters after we are connected. We use this capability instead of doing it ourselves with WEXT. Signed-off-by: Zhu Yi <yi.zhu@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-07-24p54: Eliminate unnecessary initializationLarry Finger
In two places, variables are unnecessilarly initialized to NULL. Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-07-24arlan: inverted logic?Roel Kluin
Inverted logic Signed-off-by: Roel Kluin <roel.kluin@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-07-24ath9k: make use ath9k_hw_wait int ath9k_hw_reset_tsfGabor Juhos
We have a dedicated function for this kind of checks, use that instead of duplicating the code. Changes-licensed-under: ISC Signed-off-by: Gabor Juhos <juhosg@openwrt.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-07-24ath9k: wake up the chip for TSF resetGabor Juhos
If we are in NETWORK SLEEP state, AR_SLP32_TSF_WRITE_STATUS limit always exceeds in 'ath9k_hw_reset_tsf', because reading of the AR_SLP3 register always return with the magic 0xdeadbeef value. Changes-licensed-under: ISC Signed-off-by: Gabor Juhos <juhosg@openwrt.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-07-24wl12xx: fix spellingStefan Weil
Changes (comments and debug output): * couldnt -> couldn't * frmware -> firmware * recevied -> received Signed-off-by: Stefan Weil <weil@mail.berlios.de> Acked-by: Kalle Valo <kalle.valo@nokia.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-07-24rt2x00: Comment spellcheckingLuis Correia
Fix a bunch of spelling errors in the rt2x00 drivers Signed-off-by: Luis Correia <luis.f.correia@gmail.com> Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-07-24iwlwifi: change iwl_enable/disable_interrupts to "inline"Wey-Yi Guy
iwl_enable_interrupts is being called inside the interrupt, change from function call to inline Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com> Signed-off-by: Reinette Chatre <reinette.chatre@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-07-24iwlwifi: inform user about rfkill state changesReinette Chatre
rfkill state changes are mostly available through debug messages. These are significant enough to always make user aware of so we turn them into warnings. Also insert a missing newline in some rfkill related debug message. Signed-off-by: Reinette Chatre <reinette.chatre@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-07-24iwlwifi: clarify hardware error messageReinette Chatre
When a hardware error is detected we need to be clear about that and not create impression that the microcode is able to deal with it. Signed-off-by: Reinette Chatre <reinette.chatre@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-07-24iwlwifi: make debug level more user friendlyReinette Chatre
* Deprecate the "debug50" module parameter used to obtain 5000 series and up debugging. Replace it with "debug" module parameter to match with original driver and be consistent between them. The "debug50" module parameter can still be used, except that the module parameter is not writable in keeping with its previous state. We currently just mark it as "deprecated" and do not have it in the feature-removal-schedule. Some more cleanup of module parameters needs to be done and can then be entered together. * Only make "debug" module parameters visible if the driver is compiled with CONFIG_IWLWIFI_DEBUG. This will eliminate a lot of confusion where users think they have set debug flags but yet cannot see any debug output. * Make module parameters writable. This eliminates the need for the "debug_level" sysfs file, which can now also be deprecated and added to feature-removal-schedule. This file is in significant use though with many iwlwifi documents and text referring users to it. We can thus not take its removal lightly and keep it around. With iwlcore shared between iwlagn and iwl3945 we really do not need debug module parameters for each but can instead have one debug module parameter for the iwlcore module. The same issue is here as with the sysfs file - a lot of iwlwifi documentation and text (like bug reports) rely on iwlagn and iwl3945 having this module parameter, so changing this to a module parameter of iwlcore will have significant impact and we do not do this for that reason. One consequence of this patch is that if a user is running a system with both 3945 and later hardware then the setting of the one module parameter will affect the value of the other. The likelihood of this seems low - and even if this setup is present it does not seem like an issue for both modules to run with the same debug level. Signed-off-by: Reinette Chatre <reinette.chatre@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-07-24iwlwifi: uCode Alive notification with timeoutWey-Yi Guy
Wait for REPLY_ALIVE notification from init and runtime uCode. based on the type of REPLY_ALIVE, different status bit will be set to wake up the queue: STATUS_INIT_UCODE_ALIVE for init uCode STATUS_RT_UCODE_ALIVE for runtime uCode. If timeout, attempt to download the failing uCode image again. This can only be done for the init ucode images of all iwlagn devices and the runtime ucode image of the 5000 series and up. If there is a problem with the 4965 runtime ucode coming up we restart the interface and thus trigger a new download of the init ucode also. Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com> Signed-off-by: Reinette Chatre <reinette.chatre@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-07-24iwlwifi: update 1000 series API version to match firmwareJay Sternberg
firmware file now contains build number so API needs to be updated. Signed-off-by: Jay Sternberg <jay.e.sternberg@intel.com> Signed-off-by: Reinette Chatre <reinette.chatre@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-07-24iwlwifi: checking unknown HW typeWey-Yi Guy
When deciding NVM type, if the HW type is unknown, report error and exit with -ENOENT. This check should prevent incorrect behavior by assuming the wrong NVM type. Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com> Signed-off-by: Reinette Chatre <reinette.chatre@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-07-24iwlwifi: Led blinking counting both tx and rxWey-Yi Guy
For controlling led blinking, counting both tx and rx data traffic; this will be able to handle traffic in either direction Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com> Signed-off-by: Reinette Chatre <reinette.chatre@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-07-24iwlwifi: add led debugfs functionWey-Yi Guy
Adding debugfs file to show current led blinking rate /sys/kernel/debug/ieee80211/phy0/iwlagn/data/led Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com> Signed-off-by: Reinette Chatre <reinette.chatre@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-07-24iwlagn: do not send key clear commands when rfkill enabledReinette Chatre
Do all key clearing except sending sommands to device when rfkill enabled. When rfkill enabled the interface is brought down and will be brought back up correctly after rfkill is enabled again. Same change is not needed for iwl3945 as it ignores return code when sending key clearing command to device. This fixes http://bugzilla.kernel.org/show_bug.cgi?id=13742 Signed-off-by: Reinette Chatre <reinette.chatre@intel.com> Tested-by: Frans Pop <elendil@planet.nl> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-07-24iwlwifi: make led functions genericWey-Yi Guy
Led functions are generic for all the devices except 3945, so remove the reference to 4965 Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com> Signed-off-by: Reinette Chatre <reinette.chatre@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-07-24iwlwifi: Handle new firmware file with ucode build number in headerJay Sternberg
Adding new API version to account for change to ucode file format. New header includes the build number of the ucode. This build number is the SVN revision thus allowing for exact correlation to the code that generated it. The header adds the build number so that older ucode images can also be enhanced to include the build in the future. some cleanup in iwl_read_ucode needed to ensure old header not used and reduce unnecessary references through pointer with the data is already in heap variable. Signed-off-by: Jay Sternberg <jay.e.sternberg@intel.com> Signed-off-by: Reinette Chatre <reinette.chatre@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-07-24iwlwifi: fix rx signal quality reporting in dmesgWey-Yi Guy
Fix quality incorrectly reported as signal strength value. Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com> Signed-off-by: Reinette Chatre <reinette.chatre@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-07-24iwlagn: modify digital SVR for 1000Wey-Yi Guy
On 1000, there are two Switching Voltage Regulators (SVR). The first one apply digital voltage level (1.32V) for PCIe block and core. We need to use this regulator to solve a stability issue related to noisy DC2DC line in the silicon. Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com> Signed-off-by: Reinette Chatre <reinette.chatre@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-07-24p54: fix a fw crash caused by statistic feedbackChristian Lamparter
This patch fixes a bug which crawled into the tree with the split-up changes. The memory-manager wasn't aware of the statistic feedback extra_len space requirements and happily placed following frames into the allegedly free spots. Thanks fly out to Larry Finger for taking the time to test all (permutations of) patches and theories all day long. Acked-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: Christian Lamparter <chunkeey@web.de> Tested-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-07-24p54: fix beaconing related firmware crashChristian Lamparter
This patch fixes a firmware crash which can be provoked by changing operation mode. Acked-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: Christian Lamparter <chunkeey@web.de> Tested-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-07-24p54: remove useless codeChristian Lamparter
This patch removes some useless checks in recv/xmit code. Acked-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: Christian Lamparter <chunkeey@web.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-07-24iwmc3200wifi: remove key caches in driverZhu Yi
cfg80211 now guarantees keys are set after connecting. We can remove the key cache code from the driver now. Signed-off-by: Zhu Yi <yi.zhu@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-07-24iwmc3200wifi: make iwm_send_wifi_if_cmd return 0 on successZhu Yi
We used to return the result of wait_event_interruptible_timeout() which is the remaining timeout on success. But this information is not used by any of its callers. So we just return 0 on success. This fixed a erroneous return value bug for iwm_set_key(). Signed-off-by: Zhu Yi <yi.zhu@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-07-24iwmc3200wifi: remove setting WEP keys before setting essid supportZhu Yi
The recent cfg80211 "rework key operation" patch from Johannes Berg makes sure keys are set only after the connection has been established. So we can remove the setting WEP keys before essid support from the driver. Signed-off-by: Zhu Yi <yi.zhu@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
generated by cgit v1.2.3 (git 2.39.1) at 2024-07-02 12:41:45 +0000