summaryrefslogtreecommitdiff
path: root/drivers
AgeCommit message (Collapse)Author
2008-02-07MBCS: convert dmareadlock to mutexMatthias Kaehlcke
MBCS: Convert the semaphore dmareadlock to the mutex API Signed-off-by: Matthias Kaehlcke <matthias.kaehlcke@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-02-07MBCS: convert dmawritelock to mutexMatthias Kaehlcke
MBCS: Convert the semaphore dmawritelock to the mutex API Signed-off-by: Matthias Kaehlcke <matthias.kaehlcke@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-02-07MBCS: convert algolock to mutexMatthias Kaehlcke
MBCS: Convert the semaphore algolock to the mutex API Signed-off-by: Matthias Kaehlcke <matthias.kaehlcke@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-02-07dz.c: Resource managementMaciej W. Rozycki
This is a set of changes to implement proper resource management in the driver, including iomem space reservation and operating on physical addresses ioremap()ped appropriately using accessory functions rather than unportable direct assignments. Some adjustments to code are made to reflect the architecture of the interface, which is a centrally controlled multiport (or, as referred to from DEC documentation, a serial line multiplexer, going up to 8 lines originally) rather than a bundle of separate ports. Types are changed, where applicable, to specify the width of hardware registers explicitly. The interrupt handler is now managed in the ->startup() and ->shutdown() calls for consistency with other drivers and also in preparation to handle the handover from the initial firmware-based console gracefully. Signed-off-by: Maciej W. Rozycki <macro@linux-mips.org> Cc: Ralf Baechle <ralf@linux-mips.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-02-07dz.c: Use a helper to cast from "struct uart_port *"Maciej W. Rozycki
Replace all casts from "struct uart_port *" to "struct dz_port *" with a construct based on container_of(). This makes the conversion work irrespective of where the former struct is located within the latter. By popular request I have implemented it as an inline function rather than a macro this time. Signed-off-by: Maciej W. Rozycki <macro@linux-mips.org> Cc: Ralf Baechle <ralf@linux-mips.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-02-07dz: clean up and improve the setup of termios settingsMaciej W. Rozycki
A set of changes to the way termios settings are propagated to the serial port hardware. The DZ11 only supports a selection of fixed baud settings, so some requests may not be fulfilled. Keep the old setting in such a case and failing that resort to 9600bps. Also add a missing update of the transmit timeout. And remove the explicit encoding of the line selected from writes to the Line Parameters Register as it has been preencoded by the ->set_termios() call already. Finally, remove a duplicate macro for the Receiver Enable bit. Signed-off-by: Maciej W. Rozycki <macro@linux-mips.org> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: Alan Cox <alan@lxorguk.ukuu.org.uk> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-02-07dz: handle special conditions on reception correctlyMaciej W. Rozycki
Handle the read and ignore status masks correctly. Handle the BREAK condition as expected: a framing error with a null character is a BREAK, any other framing error is a framing error indeed. Signed-off-by: Maciej W. Rozycki <macro@linux-mips.org> Cc: Jiri Slaby <jirislaby@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-02-07dz: fix locking issuesMaciej W. Rozycki
The ->start_tx(), ->stop_tx() and ->stop_rx() backends are called with the port's lock already taken. Remove locking from within them and wrap around calls as necessary. Signed-off-by: Maciej W. Rozycki <macro@linux-mips.org> Cc: Jiri Slaby <jirislaby@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-02-07dz: rename the serial console structureMaciej W. Rozycki
Rename the serial console structure so that `modpost' does not complain about a reference to an "init" section -- "_console" is magic. Signed-off-by: Maciej W. Rozycki <macro@linux-mips.org> Cc: Jiri Slaby <jirislaby@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-02-07dz: update kconfig descriptionMaciej W. Rozycki
Reformat the Kconfig entries and update descriptions for accuracy. Select the driver by default for configurations of interest. For the curious: 32BIT means only 32-bit DECstations support the device, not that the driver is not 64-bit clean; I have not checked that either though. Signed-off-by: Maciej W. Rozycki <macro@linux-mips.org> Cc: Jiri Slaby <jirislaby@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-02-07dz: add and reorder inclusions, remove unneeded onesMaciej W. Rozycki
Sort the header inclusions, add a few that are needed but pulled indirectly only and remove ones that are not really used. Signed-off-by: Maciej W. Rozycki <macro@linux-mips.org> Cc: Jiri Slaby <jirislaby@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-02-07dz: don't panic() when request_irq() failsMaciej W. Rozycki
Well, panic() is a little bit undue if request_irq() fails; there is probably no need to justify it any further. Handle the case gracefully, by unregistering the driver. Signed-off-by: Maciej W. Rozycki <macro@linux-mips.org> Cc: Jiri Slaby <jirislaby@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-02-07dz: always check if it is safe to console_putchar()Maciej W. Rozycki
Polled transmission is tricky enough with the DZ11 design. While "loop" is set to a high value, conceptually you are not allowed to transmit without checking whether the device offers the right transmission line (yes, it is the device that selects the line -- the driver has no control over it other than disabling the transmitter offered if it is the wrong one), so the loop has to be run at least once. Well, the '1977 or PDP11 view of how serial lines should be handled... Except that the serial interface used to be quite an impressive board back then rather than chip. Signed-off-by: Maciej W. Rozycki <macro@linux-mips.org> Cc: Jiri Slaby <jirislaby@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-02-07dz.h: remove useless unused module junkMaciej W. Rozycki
Remove unused module function prototypes that would not even build if enabled. Signed-off-by: Maciej W. Rozycki <macro@linux-mips.org> Cc: Jiri Slaby <jirislaby@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-02-07drivers/edac/i3000: document type promotionJason Uhlenkott
By popular request, add a comment documenting the implicit type promotion here. Signed-off-by: Jason Uhlenkott <juhlenko@akamai.com> Signed-off-by: Doug Thompson <dougthompson@xmission.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-02-07drivers/edac: i3000: missing init codeHitoshi Mitake
There is a missing sequence of initialization code during startup. Signed-off-by: Hitoshi Mitake <h.mitake@gmail.com> Signed-off-by: Jason Uhlenkott <juhlenko@akamai.com> Signed-off-by: Doug Thompson <dougthompson@xmisson.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-02-07drivers/edac: mpc85xx: add static scopeDoug Thompson
Made a previous global variable, static in scope Signed-off-by: Doug Thompson <dougthompson@xmission.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-02-07drivers/edac: i3000: 64bit buildJason Uhlenkott
Modified to run on x86_64 as well as x86 i3000_edac builds (and runs) fine on x86_64. Signed-off-by: Jason Uhlenkott <juhlenko@akamai.com> Signed-off-by: Doug Thompson <dougthompson@xmission.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-02-07drivers/edac: pci: broken parity regressionBryan Boatright
Using the EDAC code in kernel.org kernel version 2.6.23.8 I am seeing the following problem: In the kernel there is a pci device attribute located in sysfs that is checked by the EDAC PCI scanning code. If that attribute is set, PCI parity/error scannining is skipped for that device. The attribute is: broken_parity_status as is located in /sys/devices/pci<XXX>/0000:XX:YY.Z directorys for PCI devices. I don't think this check was actually implemented. I have a misbehaved card that reports a parity error every 1000 ms: Nov 25 07:28:43 beta kernel: EDAC PCI: Master Data Parity Error on 0000:05:01.0 Nov 25 07:28:44 beta kernel: EDAC PCI: Master Data Parity Error on 0000:05:01.0 Nov 25 07:28:45 beta kernel: EDAC PCI: Master Data Parity Error on 0000:05:01.0 Setting that card's broken_parity_status bit did not mask the error: echo "1" > /sys/bus/pci/devices/0000:05:01.0/broken_parity_status I looked through the EDAC code and did not readily see any reference to broken_parity_status at all (which makes sense based on the behavior I am seeing). I applied the following patch as a proof-of-concept and now EDAC's PCI parity error reporting behaves as documented: bryan Good regression find, bryan. It used to work. sigh. I added more logic to your patch, for more coverage of the error. Doug T Signed-off-by: Bryan Boatright <b1@omega71.com> Signed-off-by: Doug Thompson <dougthompson@xmisson.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-02-07drivers-edac: add marvell mv64x60 driverDave Jiang
Marvell mv64x60 SoC support for EDAC. Used on PPC and MIPS platforms. Development and testing done on PPC Motorola prpmc2800 ATCA board. [akpm@linux-foundation.org: make mv64x60_ctl_name static] Signed-off-by: Dave Jiang <djiang@mvista.com> Cc: Alan Cox <alan@lxorguk.ukuu.org.uk Signed-off-by: Douglas Thompson <dougthompson@xmission.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-02-07drivers-edac: add freescale mpc85xx driverDave Jiang
EDAC chip driver support for Freescale MPC85xx platforms. PPC based. Signed-off-by: Dave Jiang <djiang@mvista.com> Cc: Alan Cox <alan@lxorguk.ukuu.org.uk Signed-off-by: Doug Thompson <dougthompson@xmission.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-02-07drivers-edac: i3000 replace macros with functionsJason Uhlenkott
Replace function-like macros with functions. Signed-off-by: Jason Uhlenkott <juhlenko@akamai.com> Cc: Alan Cox <alan@lxorguk.ukuu.org.uk Signed-off-by: Doug Thompson <dougthompson@xmission.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-02-07drivers-edac: i3000 code tidyingJason Uhlenkott
Style cleanup, mostly just 80-column fixes. Signed-off-by: Jason Uhlenkott <juhlenko@akamai.com> Cc: Alan Cox <alan@lxorguk.ukuu.org.uk Signed-off-by: Doug Thompson <dougthompson@xmission.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-02-07drivers-edac: add Cell MC driverBenjamin Herrenschmidt
Adds driver for the Cell memory controller when used without a Hypervisor such as on the IBM Cell blades. There might still be some improvements to do to this such as finding if it's possible to properly obtain more details about the address of the error but it's good enough already to report CE counts which is our main priority at the moment. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Alan Cox <alan@lxorguk.ukuu.org.uk Signed-off-by: Doug Thompson <dougthompson@xmission.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-02-07drivers-edac: add Cell XDR memory typesBenjamin Herrenschmidt
Add the definitions for the Rambus XDR memory type used by the Cell processor. It's a pre-requisite for the followup Cell EDAC patch. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Alan Cox <alan@lxorguk.ukuu.org.uk Signed-off-by: Doug Thompson <dougthompson@xmission.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-02-07drivers-edac: use round_jiffies_relativeAnton Blanchard
When rounding a relative timeout we need to use round_jiffies_relative(). Signed-off-by: Anton Blanchard <anton@samba.org> Acked-by: Arjan van de Ven <arjan@linux.intel.com> Cc: Alan Cox <alan@lxorguk.ukuu.org.uk Signed-off-by: Doug Thompson <dougthompson@xmission.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-02-07drivers-edac: turn on edac device error loggingDoug Thompson
ENABLE the 'logging' of CE and UE events for the EDAC_DEVICE class of error harvester in EDAC Cc: Alan Cox <alan@lxorguk.ukuu.org.uk Signed-off-by: Doug Thompson <dougthompson@xmission.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-02-07ASIC3 driverSamuel Ortiz
This is a patch for the Compaq ASIC3 multi function chip, found in many PDAs (iPAQs, HTCs...). It is a simplified version of Paul Sokolovsky's first proposal [1]. With this code, it is basically a GPIO and IRQ expander. My plan is to add more features once this patch gets reviewed and accepted. [1] http://lkml.org/lkml/2007/5/1/46 Signed-off-by: Samuel Ortiz <sameo@openedhand.com> Cc: Paul Sokolovsky <pmiscml@gmail.com> Cc: Ben Dooks <ben@trinity.fluff.org> Cc: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-02-07DS1WM: decouple host IRQ and INTR active state settingsPhilipp Zabel
The DS1WM driver incorrectly infers the IAS bit (1-wire interrupt active high) from IRQ settings. There are devices that have IAS=0 but still need the IRQ to trigger on a rising edge. With this patch, machines with DS1WM that need IAS=1 have to set .active_high=1 in the ds1wm_platform_data. Signed-off-by: Philipp Zabel <philipp.zabel@gmail.com> Acked-by: Evgeniy Polyakov <johnpol@2ka.mipt.ru> Acked-by: Matt Reimer <mreimer@vpop.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-02-07power_supply: remove capacity_level from list of sysfs attributesThadeu Lima de Souza Cascardo
This commit: commit 8efe444038a205e79b38b7ad03878824901849a8 Author: Andres Salomon <dilinger@queued.net> Date: Wed Dec 12 14:12:56 2007 -0500 power: remove POWER_SUPPLY_PROP_CAPACITY_LEVEL Removed CAPACITY_LEVEL from every other code, leaving the array with sysfs attributes with one more entry than the number of enums in power_supply.h. This leads to some attributes containing the value of the attribute right after it. For example, temp_ambient would have the value of time_to_empty_now. In my case, I had time_to_full_avg have the value which should be in model_name, when the former was usually empty. Cc: Andres Salomon <dilinger@debian.org> Cc: David Woodhouse <dwmw2@infradead.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-02-06Merge branch 'async-tx-for-linus' of ↵Linus Torvalds
git://lost.foo-projects.org/~dwillia2/git/iop into fix * 'async-tx-for-linus' of git://lost.foo-projects.org/~dwillia2/git/iop: async_tx: allow architecture specific async_tx_find_channel implementations async_tx: replace 'int_en' with operation preparation flags async_tx: kill tx_set_src and tx_set_dest methods async_tx: kill ASYNC_TX_ASSUME_COHERENT iop-adma: use LIST_HEAD instead of LIST_HEAD_INIT async_tx: use LIST_HEAD instead of LIST_HEAD_INIT async_tx: fix compile breakage, mark do_async_xor __always_inline
2008-02-06scsi: megaraid: trivial drop duplicate mutex.h includeDaniel Walker
Signed-off-by: Daniel Walker <dwalker@mvista.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-02-06Merge branch 'upstream-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/jgarzik/libata-dev * 'upstream-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jgarzik/libata-dev: ata_piix.c:piix_init_one() must be __devinit sata_via.c: Remove missleading comment. libata-core: unblacklist HITACHI drives sata_nv: fix ATAPI issues with memory over 4GB (v7) ata: drivers/ata/sata_mv.c needs dmapool.h libata: kill now unused n_iter and fix sata_fsl ahci: fix CAP.NP and PI handling sata_mv: Support SoC controllers Rename: linux/pata_platform.h to linux/ata_platform.h
2008-02-06Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6Linus Torvalds
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6: (35 commits) virtio net: fix oops on interface-up Fix PHY Lib support for gianfar and ucc_geth forcedeth: preserve registers forcedeth: phy status fix forcedeth: restart tx/rx ipvs: Make wrr "no available servers" error message rate-limited [PPPOL2TP]: Label unused warning when CONFIG_PROC_FS is not set. [NET_SCHED]: cls_flow: support classification based on VLAN tag [VLAN]: Constify skb argument to vlan_get_tag() [NET_SCHED]: cls_flow: fix key mask validity check [NET_SCHED]: em_meta: fix compile warning b43: Fix DMA for 30/32-bit DMA engines b43: fix build with CONFIG_SSB_PCIHOST=n mac80211: Is not EXPERIMENTAL anymore iwl3945-base.c: fix off-by-one errors b43legacy: fix DMA slot resource leakage b43legacy: drop packets we are not able to encrypt b43legacy: fix suspend/resume b43legacy: fix PIO crash Generic HDLC - use random_ether_addr() ...
2008-02-06fb: fix warning: no return statement in function returning non-voidAnton Vorontsov
Warning is reproducible with selected FB_CFB_REV_PIXELS_IN_BYTE. CC drivers/video/sysfillrect.o In file included from drivers/video/sysfillrect.c:18: drivers/video/fb_draw.h: In function `fb_rev_pixels_in_long': drivers/video/fb_draw.h:94: warning: no return statement in function returning non-void CC drivers/video/syscopyarea.o In file included from drivers/video/syscopyarea.c:22: drivers/video/fb_draw.h: In function `fb_rev_pixels_in_long': drivers/video/fb_draw.h:94: warning: no return statement in function returning non-void Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com> Cc: "Antonino A. Daplas" <adaplas@pol.net> Cc: <stable@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-02-06virtio: add missing #include <linux/delay.h>Johann Felix Soden
Include linux/delay.h to fix compiler error: drivers/virtio/virtio_balloon.c: In function 'fill_balloon': drivers/virtio/virtio_balloon.c:98: error: implicit declaration of function 'msleep' Signed-off-by: Johann Felix Soden <johfel@users.sourceforge.net> Cc: Rusty Russell <rusty@rustcorp.com.au> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-02-06PNP: disable Supermicro H8DCE motherboard resources that overlap SATA BARsBjorn Helgaas
Some Supermicro BIOSes describe a SATA PCI BAR as a motherboard resource. The PNP system driver claims motherboard resources, and this prevents the sata_nv driver from requesting it later. This patch disables the PNP0C01/PNP0C02 resources so they won't be claimed by the PNP system driver, so they'll available for sata_nv. This fixes the bugs below, where sata_nv detects only two out of four SATA drives. The signature includes dmesg lines similar to these: pnp: 00:09: iomem range 0xdfefc000-0xdfefcfff has been reserved pnp: 00:09: iomem range 0xdfefd000-0xdfefd3ff has been reserved pnp: 00:09: iomem range 0xdfefe000-0xdfefe3ff has been reserved PCI: Unable to reserve mem region #6:1000@dfefd000 for device 0000:80:07.0 sata_nv: probe of 0000:80:07.0 failed with error -16 PCI: Unable to reserve mem region #6:1000@dfefe000 for device 0000:80:08.0 sata_nv: probe of 0000:80:08.0 failed with error -16 References: https://bugzilla.redhat.com/show_bug.cgi?id=280641 https://bugzilla.redhat.com/show_bug.cgi?id=313491 http://lkml.org/lkml/2008/1/9/449 http://thread.gmane.org/gmane.linux.acpi.devel/27312 This is post-2.6.24 material. Signed-off-by: Bjorn Helgaas <bjorn.helgaas@hp.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-02-06PNP: do not test PNP_DRIVER_RES_DO_NOT_CHANGE on suspend/resumeRene Herman
The PNP_DRIVER_RES_DO_NOT_CHANGE flag is meant to signify that the PNP core should not change resources for the device -- not that it shouldn't disable/enable the device on suspend/resume. ALSA ISAPnP drivers set PNP_DRIVER_RES_DO_NOT_CHANAGE (0x0001) through setting PNP_DRIVER_RES_DISABLE (0x0003). The latter including the former may in itself be considered rather unexpected but doesn't change that suspend/resume wouldn't seem to have any business testing the flag. As reported by Ondrej Zary for snd-cs4236, ALSA driven ISAPnP cards don't survive swsusp hibernation with the resume skipping setting the resources due to testing the flag -- the same test in the suspend path isn't enough to keep hibernation from disabling the card it seems. These tests were added (in 2005) by Piere Ossman in commit 68094e3251a664ee1389fcf179497237cbf78331, "alsa: Improved PnP suspend support" who doesn't remember why. This deletes them. Signed-off-by: Rene Herman <rene.herman@gmail.com> Tested-by: Ondrej Zary <linux@rainbow-software.org> Cc: Bjorn Helgaas <bjorn.helgaas@hp.com> Cc: Pierre Ossman <drzeus@drzeus.cx> Cc: Adam Belay <ambx1@neo.rr.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-02-06isapnp driver semaphore to mutexDaniel Walker
Changed the isapnp semaphore to a mutex. [akpm@linux-foundation.org: no externs-in-c] [akpm@linux-foundation.org: build fix] Signed-off-by: Daniel Walker <dwalker@mvista.com> Cc: Bjorn Helgaas <bjorn.helgaas@hp.com> Cc: Ingo Molnar <mingo@elte.hu> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-02-06pnp: declare PNP option parsing functions as __initThomas Renninger
There are three kind of parse functions provided by PNP acpi/bios: - get current resources - set resources - get possible resources The first two may be needed later at runtime. The possible resource settings should never change dynamically. And even if this would make any sense (I doubt it), the current implementation only parses possible resource settings at early init time: -> declare all the option parsing __init [akpm@linux-foundation.org: coding-style fixes] Signed-off-by: Thomas Renninger <trenn@suse.de> Acked-By: Rene Herman <rene.herman@gmail.com> Cc: Bjorn Helgaas <bjorn.helgaas@hp.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-02-06simplify pnp_activate_dev() and pnp_disable_dev() return valuesBjorn Helgaas
Make pnp_activate_dev() and pnp_disable_dev() return only 0 (success) or a negative error value, as pci_enable_device() and pci_disable_device() do. Previously they returned: 0: device was already active (or disabled) 1: we just activated (or disabled) device <0: -EBUSY or error from pnp_start_dev() (or pnp_stop_dev()) Now we return only 0 (device is active or disabled) or <0 (error). All in-tree callers either ignore the return values or check only for errors (negative values). Signed-off-by: Bjorn Helgaas <bjorn.helgaas@hp.com> Cc: Adam Belay <ambx1@neo.rr.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-02-06md: fix an occasional deadlock in raid5NeilBrown
raid5's 'make_request' function calls generic_make_request on underlying devices and if we run out of stripe heads, it could end up waiting for one of those requests to complete. This is bad as recursive calls to generic_make_request go on a queue and are not even attempted until make_request completes. So: don't make any generic_make_request calls in raid5 make_request until all waiting has been done. We do this by simply setting STRIPE_HANDLE instead of calling handle_stripe(). If we need more stripe_heads, raid5d will get called to process the pending stripe_heads which will call generic_make_request from a This change by itself causes a performance hit. So add a change so that raid5_activate_delayed is only called at unplug time, never in raid5. This seems to bring back the performance numbers. Calling it in raid5d was sometimes too soon... Neil said: How about we queue it for 2.6.25-rc1 and then about when -rc2 comes out, we queue it for 2.6.24.y? Acked-by: Dan Williams <dan.j.williams@intel.com> Signed-off-by: Neil Brown <neilb@suse.de> Tested-by: dean gaudet <dean@arctic.org> Cc: <stable@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-02-06md: change ITERATE_RDEV_GENERIC to rdev_for_each_list, and remove ↵NeilBrown
ITERATE_RDEV_PENDING. Finish ITERATE_ to for_each conversion. Signed-off-by: Neil Brown <neilb@suse.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-02-06md: change ITERATE_RDEV to rdev_for_eachNeilBrown
As this is more in line with common practice in the kernel. Also swap the args around to be more like list_for_each. Signed-off-by: Neil Brown <neilb@suse.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-02-06md: change INTERATE_MDDEV to for_each_mddevNeilBrown
As this is more consistent with kernel style. Signed-off-by: Neil Brown <neilb@suse.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-02-06md: change a few 'int' to 'size_t' in mdNeilBrown
As suggested by Andrew Morton. Signed-off-by: Neil Brown <neilb@suse.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-02-06md: fix use-after-free bug when dropping an rdev from an md arrayNeilBrown
Due to possible deadlock issues we need to use a schedule work to kobject_del an 'rdev' object from a different thread. A recent change means that kobject_add no longer gets a refernce, and kobject_del doesn't put a reference. Consequently, we need to explicitly hold a reference to ensure that the last reference isn't dropped before the scheduled work get a chance to call kobject_del. Also, rename delayed_delete to md_delayed_delete to that it is more obvious in a stack trace which code is to blame. Cc: Al Viro <viro@ZenIV.linux.org.uk> Signed-off-by: Neil Brown <neilb@suse.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-02-06md: allow an md array to appear with 0 drives if it has external metadataNeilBrown
Signed-off-by: Neil Brown <neilb@suse.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-02-06md: lock address when changing attributes of component devicesNeilBrown
Signed-off-by: Neil Brown <neilb@suse.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-02-06md: allow devices to be shared between md arraysNeilBrown
Currently, a given device is "claimed" by a particular array so that it cannot be used by other arrays. This is not ideal for DDF and other metadata schemes which have their own partitioning concept. So for externally managed metadata, just claim the device for md in general, require that "offset" and "size" are set properly for each device, and make sure that if a device is included in different arrays then the active sections do not overlap. This involves adding another flag to the rdev which makes it awkward to set "->flags = 0" to clear certain flags. So now clear flags explicitly by name when we want to clear things. Signed-off-by: Neil Brown <neilb@suse.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
generated by cgit v1.2.3 (git 2.39.1) at 2024-11-13 17:03:58 +0000