summaryrefslogtreecommitdiff
path: root/drivers
AgeCommit message (Collapse)Author
2009-11-03Merge branch 'pm-fixes' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/suspend-2.6 * 'pm-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/suspend-2.6: PM: Remove some debug messages producing too much noise PM: Fix warning on suspend errors PM / Hibernate: Add newline to load_image() fail path PM / Hibernate: Fix error handling in save_image() PM / Hibernate: Fix blkdev refleaks PM / yenta: Split resume into early and late parts (rev. 4)
2009-11-03Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: Input: gpio-keys - use IRQF_SHARED Input: winbond-cir - select LEDS_TRIGGERS Input: i8042 - try to get stable CTR value when initializing Input: atkbd - add a quirk for OQO 01+ multimedia keys
2009-11-03Merge branch 'i2c-fixes' of git://git.fluff.org/bjdooks/linuxLinus Torvalds
* 'i2c-fixes' of git://git.fluff.org/bjdooks/linux: i2c-mpc: Do not generate STOP after read. i2c: imx: disable clock when it's possible to save power. i2c: imx: only imx1 needs disable delay i2c: imx: check busy bit when START/STOP
2009-11-03Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6Linus Torvalds
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6: (21 commits) mac80211: check interface is down before type change cfg80211: fix NULL ptr deref libertas if_usb: Fix crash on 64-bit machines mac80211: fix reason code output endianness mac80211: fix addba timer ath9k: fix misplaced semicolon on rate control b43: Fix DMA TX bounce buffer copying mac80211: fix BSS leak rt73usb.c : more ids ipw2200: fix oops on missing firmware gre: Fix dev_addr clobbering for gretap sky2: set carrier off in probe net: fix sk_forward_alloc corruption pcnet_cs: add cis of PreMax PE-200 ethernet pcmcia card r8169: Fix card drop incoming VLAN tagged MTU byte large jumbo frames ibmtr: possible Read buffer overflow? net: Fix RPF to work with policy routing net: fix kmemcheck annotations e1000e: rework disable K1 at 1000Mbps for 82577/82578 e1000e: config PHY via software after resets ...
2009-11-03PM: Remove some debug messages producing too much noisePavel Machek
pm_runtime_idle() is somewhat noisy. Remove debug prints. Signed-off-by: Pavel Machek <pavel@ucw.cz> Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
2009-11-03PM: Fix warning on suspend errorsRomit Dasgupta
Fixes the point where we need to complete the power transition when device suspend fails, so that we don't print warnings about devices added to the device hierarchy after a failing suspend. [rjw: Modified changelog.] Signed-off-by: Romit Dasgupta <romit@ti.com> Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
2009-11-03PM / yenta: Split resume into early and late parts (rev. 4)Rafael J. Wysocki
Commit 0c570cdeb8fdfcb354a3e9cd81bfc6a09c19de0c (PM / yenta: Fix cardbus suspend/resume regression) caused resume to fail on systems with two CardBus bridges. While the exact nature of the failure is not known at the moment, it can be worked around by splitting the yenta resume into an early part, executed during the early phase of resume, that will only resume the socket and power it up if there was a card in it during suspend, and a late part, executed during "regular" resume, that will carry out all of the remaining yenta resume operations. Fixes http://bugzilla.kernel.org/show_bug.cgi?id=14334, which is a listed regression from 2.6.31. Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl> Acked-by: Dominik Brodowski <linux@dominikbrodowski.net> Reported-by: Stephen J. Gowdy <gowdy@cern.ch> Tested-by: Jose Marino <braket@hotmail.com>
2009-11-02Input: gpio-keys - use IRQF_SHAREDDmitry Eremin-Solenikov
There is nothing that disallows gpio-keys to share it's IRQ line w/ other drivers. Make it use IRQF_SHARED in request_irq(). An example of other driver with which I'd like to share IRQ line for GPIO buttons is ledtrig-gpio. Signed-off-by: Dmitry Eremin-Solenikov <dbaryshkov@gmail.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2009-11-02Input: winbond-cir - select LEDS_TRIGGERSDavid Härdeman
drivers/input/misc/winbond-cir.c depends on LEDS_TRIGGERS so add an appropriate select to drivers/input/misc/Kconfig Signed-off-by: David Härdeman <david@hardeman.nu> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2009-11-02Input: i8042 - try to get stable CTR value when initializingDmitry Torokhov
If user presses keys while i8042 is being initialized there is a chance that keyboard data will be mistaken for results of Read Control Register command causing futher troubles. Work around this issue by reading CTR several times and stop when we get matching results. Reported-and-tested-by: Dave Young <hidave.darkstar@gmail.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2009-11-02Merge commit 'v2.6.32-rc5' into for-linusDmitry Torokhov
2009-11-02Merge branch 'master' of ↵David S. Miller
git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-2.6
2009-11-02i2c-mpc: Do not generate STOP after read.Joakim Tjernlund
The driver always ends a read with a STOP condition which breaks subsequent I2C reads/writes in the same transaction as these expect to do a repeated START(ReSTART). This will also help I2C multimaster as the bus will not be released after the first read, but when the whole transaction ends. Signed-off-by: Joakim Tjernlund <Joakim.Tjernlund@transmode.se> Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2009-11-02i2c: imx: disable clock when it's possible to save power.Richard Zhao
Enable clock before START, disable it after STOP. Signed-off-by: Richard Zhao <linuxzsc@gmail.com> Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2009-11-02i2c: imx: only imx1 needs disable delayRichard Zhao
check cpu_is_mx1() when disable delay. Signed-off-by: Richard Zhao <linuxzsc@gmail.com> Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2009-11-02i2c: imx: check busy bit when START/STOPRichard Zhao
The controller can't do anything else before it actually generates START/STOP. So we check busy bit to make sure START/STOP is successfully finished. If we don't check busy bit, START/STOP may fail on some fast CPUs. Signed-off-by: Richard Zhao <linuxzsc@gmail.com> Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2009-11-02i915: fix intel graphics suspend breakage due to resume/lid event confusionLinus Torvalds
In commit c1c7af60892070e4b82ad63bbfb95ae745056de0 ("drm/i915: force mode set at lid open time") the intel graphics driver was taught to restore the LVDS mode on lid open. That caused problems with interaction with the suspend/resume code, which commonly runs at the same time (suspend is often caused by the lid close event, while lid open is commonly a resume event), which was worked around with in commit 06891e27a9b5dba5268bb80e41a283f51335afe7 ("drm/i915: fix suspend/resume breakage in lid notifier"). However, in the meantime the lid event code had also grown a user event notifier (commit 06324194eee97a51b5f172270df49ec39192d6cc: "drm/i915: generate a KMS uevent at lid open/close time"), and now _that_ causes problems with suspend/resume and some versions of Xorg reacting to those uevents by setting the mode. So this effectively reverts that commit 06324194ee, and makes the lid open protection logic against suspend/resume more explicit. This fixes at least one laptop. See http://bugzilla.kernel.org/show_bug.cgi?id=14484 for more details. Acked-by: Jesse Barnes <jbarnes@virtuousgeek.org> Cc: Riccardo Magliocchetti <riccardo.magliocchetti@gmail.com> Cc: Eric Anholt <eric@anholt.net> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-10-31Merge git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging-2.6Linus Torvalds
* git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging-2.6: Staging: fix wireless drivers depends Staging: wireless drivers Kconfig change Staging: android: mark subsystem as broken Staging: remove stlc45xx driver Staging: rtl8187se/rtl8192e/rtl8192su: allow module unload Staging: vt6656: fix the memory free bug in vntwusb_disconnect() Staging: Panel: prevent driver from calling misc_deregister twice on same ressource Staging: hv: fix oops in vmbus - missing #include Staging: hv: fix oops in vmbus - netvsc list_head Staging: hv: fix oops in vmbus - udev events Staging: hv: Fix vmbus load hang caused by faulty data packing Staging: hv: Fix null pointer error after vmbus loading Staging: hv TODO patches
2009-10-31Merge git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb-2.6Linus Torvalds
* git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb-2.6: USB: fsl_udc_core: Fix kernel oops on module removal USB: option: TLAYTECH TUE800 support USB: r8a66597-hcd: fix cannot detect a device when uses_new_polling is set USB: serial: sierra driver autopm fixes USB: serial: sierra driver send_setup() autopm fix USB: rndis_host: debug info clobbered before it is logged
2009-10-31Merge git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty-2.6Linus Torvalds
* git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty-2.6: tty: Mark generic_serial users as BROKEN
2009-10-31Merge git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core-2.6Linus Torvalds
* git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core-2.6: Documentation: ABI: /sys/devices/system/cpu/cpu#/node Documentation: ABI: /sys/devices/system/cpu/cpuidle/ Documentation: ABI: /sys/devices/system/cpu/sched_[mc|smt]_power_savings Documentation: ABI: /sys/devices/system/cpu/cpu#/ topology files Documentation: ABI: /sys/devices/system/cpu/ topology files Documentation: ABI: document /sys/devices/system/cpu/ Documentation: ABI: rename sysfs-devices-cache_disable properly Driver core: allow certain drivers prohibit bind/unbind via sysfs Driver core: fix driver_register() return value
2009-10-31Merge branch 'for-linus' of git://git390.marist.edu/pub/scm/linux-2.6Linus Torvalds
* 'for-linus' of git://git390.marist.edu/pub/scm/linux-2.6: [S390] smp: fix sigp sense handling [S390] smp: fix sigp stop handling [S390] cputime: fix overflow on 31 bit systems [S390] call home: fix string length handling [S390] call home: fix error handling in init function [S390] smp: fix prefix handling of offlined cpus [S390] s/r: cmm resume fix [S390] call home: fix local buffer usage in proc handler
2009-10-31Merge branch 'for-linus' of git://neil.brown.name/mdLinus Torvalds
* 'for-linus' of git://neil.brown.name/md: async_tx: fix asynchronous raid6 recovery for ddf layouts async_pq: rename scribble page async_pq: kill a stray dma_map() call and other cleanups md/raid6: kill a gcc-4.0.1 'uninitialized variable' warning raid6/async_tx: handle holes in block list in async_syndrome_val md/async: don't pass a memory pointer as a page pointer. md: Fix handling of raid5 array which is being reshaped to fewer devices. md: fix problems with RAID6 calculations for DDF. md/raid456: downlevel multicore operations to raid_run_ops md: drivers/md/unroll.pl replaced with awk analog md: remove clumsy usage of do_sync_mapping_range from bitmap code md: raid1/raid10: handle allocation errors during array setup. md/raid5: initialize conf->device_lock earlier md/raid1/raid10: add a cond_resched Revert "md: do not progress the resync process if the stripe was blocked"
2009-10-31dpt_i2o: Fix typo of EINVALOGAWA Hirofumi
Commit ef7562b7f28319e6dd1f85dc1af87df2a7a84832 ("dpt_i2o: Fix up copy*user") had a silly typo: EINVAL should be -EINVAL. Signed-off-by: OGAWA Hirofumi <hirofumi@mail.parknet.co.jp> Cc: stable@kernel.org Cc: Alan Cox <alan@linux.intel.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-10-30Driver core: allow certain drivers prohibit bind/unbind via sysfsDmitry Torokhov
Platform drivers registered via platform_driver_probe() can be bound to devices only once, upon registration, because discard their probe() routines to save memory. Unbinding the driver through sysfs 'unbind' leaves the device stranded and confuses users so let's not create bind and unbind attributes for such drivers. Signed-off-by: Dmitry Torokhov <dtor@mail.ru> Cc: Éric Piel <eric.piel@tremplin-utc.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-10-30Driver core: fix driver_register() return valueStas Sergeev
In this patch: http://git.kernel.org/?p=linux/kernel/git/torvalds/linux-2.6.git;a=commitdiff;h=16dc42e018c2868211b4928f20a957c0c216126c the check was added for another driver to already claim the same device on the same bus. But the returned error code was wrong: to modprobe, the -EEXIST means that _this_ driver is already installed. It therefore doesn't produce the needed error message when _another_ driver is trying to register for the same device. Returning -EBUSY fixes the problem. Signed-off-by: Stas Sergeev <stsp@aknet.ru> Cc: stable <stable@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-10-30USB: fsl_udc_core: Fix kernel oops on module removalAnton Vorontsov
fsl_udc_release() calls dma_free_coherent() with an inappropriate device passed to it, and since the device has no dma_ops, the following oops pops up: Kernel BUG at d103ce9c [verbose debug info unavailable] Oops: Exception in kernel mode, sig: 5 [#1] ... NIP [d103ce9c] fsl_udc_release+0x50/0x80 [fsl_usb2_udc] LR [d103ce74] fsl_udc_release+0x28/0x80 [fsl_usb2_udc] Call Trace: [cfbc7dc0] [d103ce74] fsl_udc_release+0x28/0x80 [fsl_usb2_udc] [cfbc7dd0] [c01a35c4] device_release+0x2c/0x90 [cfbc7de0] [c016b480] kobject_cleanup+0x58/0x98 [cfbc7e00] [c016c52c] kref_put+0x54/0x6c [cfbc7e10] [c016b360] kobject_put+0x34/0x64 [cfbc7e20] [c01a1d0c] put_device+0x1c/0x2c [cfbc7e30] [d103dbfc] fsl_udc_remove+0xc0/0x1e4 [fsl_usb2_udc] ... This patch fixes the issue by passing dev->parent, which points to a correct device. Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com> Cc: Li Yang <leoli@freescale.com> Cc: David Brownell <dbrownell@users.sourceforge.net> Cc: Guennadi Liakhovetski <lg@denx.de> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-10-30USB: option: TLAYTECH TUE800 supportBryan Wu
Add ID for Tlaytech TUE800 CDMA modem to the option driver. Signed-off-by: Bryan Wu <bryan.wu@canonical.com> Acked-By: Matthias Urlichs <matthias@urlichs.de> Cc: stable <stable@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-10-30USB: r8a66597-hcd: fix cannot detect a device when uses_new_polling is setYoshihiro Shimoda
Signed-off-by: Yoshihiro Shimoda <shimoda.yoshihiro@renesas.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-10-30USB: serial: sierra driver autopm fixesElina Pasheva
This patch presents fixes for the autosuspend feature implementation in sierra usb serial driver in functions sierra_open(), sierra_close() and stop_read_write_urbs(). The patch "sierra_close() must resume the device before it notifies it of a closure" submitted by Oliver Neukum on Wed, October 14 has been merged as fix in sierra_close() function. The bug fix in sierra_open() function restores the autopm interface state on error condition. The bug fix in in stop_read_write_urbs() function assures that both receive and interrupt urbs are recycled. Signed-off-by: Elina Pasheva <epasheva@sierrawireless.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-10-30USB: serial: sierra driver send_setup() autopm fixElina Pasheva
This patch presents a fix for the autosuspend feature implementation in sierra usb serial driver for function sierra_send_setup(). Because it is possible to call sierra_send_setup() before sierra_open() or after sierra_close() we added a get/put interface activity to assure that the usb control can happen even when the device is autosuspended. Signed-off-by: Elina Pasheva <epasheva@sierrawireless.com> Tested-by: Matthew Safar <msafar@sierrawireless.com> Cc: stable <stable@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-10-30USB: rndis_host: debug info clobbered before it is loggedGeorge Nassar
The MTU throttle-down if a RNDIS device doesn't support a particular packet size is being incorrectly logged. The attempted packet size is being clobbered before it gets logged. First patch; please inform if I'm doing this incorrectly. Diff'd against latest official source as per the FAQ; forward port to current git version is straightforward. Signed-off-by: George Nassar <george.nassar@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-10-30Staging: fix wireless drivers dependsRandy Dunlap
These drivers can (erroneously) be enabled even when CONFIG_NET=n, CONFIG_NETDEVICES=n, CONFIG_WLAN=n, etc. Stop this. Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-10-30Staging: wireless drivers Kconfig changeGreg Kroah-Hartman
Change the wireless drivers to depend on CONFIG_WLAN instead of CONFIG_WLAN_80211 which is going away soon. Cc: John W. Linville <linville@tuxdriver.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-10-30Staging: android: mark subsystem as brokenGreg Kroah-Hartman
It's causing lots of build errors, so just mark it as broken. It is scheduled to be removed in 2.6.33 anyway. Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-10-30Staging: remove stlc45xx driverGreg Kroah-Hartman
It's no longer needed as the p54spi driver is the same thing, under a different name and in the correct portion of the kernel tree. Cc: Javier Martinez Canillas <martinez.javier@gmail.com> Cc: Christian Lamparter <chunkeey@googlemail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-10-30Staging: rtl8187se/rtl8192e/rtl8192su: allow module unloadHerton Ronaldo Krzesinski
On rtl81* additions, they had its wireless stack made builtin instead of separated modules. But try_module_get/module_put in stack were kept, they are uneeded with the stack builtin and makes rtl81* modules impossible to remove on a system with an rtl81* card. request_module calls are also uneeded with stack builtin, so remove them too. Signed-off-by: Herton Ronaldo Krzesinski <herton@mandriva.com.br> Cc: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-10-30Staging: vt6656: fix the memory free bug in vntwusb_disconnect()miaofng
This patch is used to solve the memory bug when people plug out the wusb card then plug in. Error logs are following: root@smdk2440:~# ifdown eth1 AP deauthed me, reason=2. Config_FileOperation file Not exist Zone=[1][J][P]!! WPA: Terminating root@smdk2440:~# ----> !!!!!!!!!!!!!!here plug out the wusbcard usb 1-1: USB disconnect, address 4 ----> !!!!!!!!!!!!!!!!!!!here plug in the wusb card usb 1-1: new full speed USB device using s3c2410-ohci and address 5 usb 1-1: New USB device found, idVendor=160a, idProduct=3184 usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0 usb 1-1: Product: VNT USB-802.11 Wireless LAN Adapter usb 1-1: Manufacturer: VIA Networking Technologies, Inc. usb 1-1: configuration #1 chosen from 1 choice VIA Networking Wireless LAN USB Driver Ver. 1.19_12 Copyright (c) 2004 VIA Networking Technologies, Inc. kernel BUG at mm/slab.c:2974! Unable to handle kernel NULL pointer dereference at virtual address 00000000 pgd = c0004000 [00000000] *pgd=00000000 Internal error: Oops: 817 [#1] PREEMPT Modules linked in: vt6656_stage CPU: 0 Not tainted (2.6.32-rc2 #14) PC is at __bug+0x1c/0x28 LR is at __bug+0x18/0x28 pc : [<c002fb10>] lr : [<c002fb0c>] psr: 40000093 sp : c3867c68 ip : c3867bd0 fp : c3866000 r10: c3800600 r9 : c3802430 r8 : 00000004 r7 : c3802428 r6 : c3802660 r5 : c3802420 r4 : a0000013 r3 : 00000000 r2 : c3866000 r1 : 00000003 r0 : 00000024 Flags: nZcv IRQs off FIQs on Mode SVC_32 ISA ARM Segment kernel Control: 0000717f Table: 330a8000 DAC: 00000017 Process khubd (pid: 152, stack limit = 0xc3866270) Stack: (0xc3867c68 to 0xc3868000) 7c60: c0093fdc c0094088 000000d0 000000d0 00000000 000080d0 7c80: 00000000 a0000013 c39ebec0 c3800600 000080d0 00000001 c03f13cc 00000006 7ca0: c02b36f0 c0094574 c0043428 0001c9de c39ebec0 c39ebea0 c3000c00 c02a6a84 7cc0: 89705f41 c3000c00 c39ebec0 c39ebea0 c3000c00 bf036f24 c39ebec8 00000006 7ce0: 00000000 c3000c00 c39ebec0 c39ebea0 c3000c00 bf036f24 c39ebec8 00000006 7d00: 00000000 bf003398 c00aa514 c3867d20 0000a1ff c00e1448 c39d9f84 c39aabe8 7d20: c3867d50 c00e1888 c39aabe8 c39ebea0 c39ebec0 bf036ebc c3000c00 bf036f24 7d40: 0000bec8 01000000 00000000 c39ebea0 c39ebec0 bf036ebc c3000c00 bf036f24 7d60: c39ebec8 00000000 00000000 c0223798 c39ebec0 c01daa14 bf036eec c3867da0 7d80: c045a4f8 c01da6e4 c39ebec0 00000000 c01daa14 c39ebec0 c3867da0 c01d9870 7da0: c38331a8 c39fcb94 c005b3b4 c39ebec0 c39ebec0 c39ebef4 00000000 c01da890 7dc0: c39ebec0 c39ebec0 c3000c00 c01d97f4 00000000 c01d8470 c39ebea0 c3000c68 7de0: 00000000 c3000c68 c3218a00 c3abcd20 00000001 c39ebec0 c39ebea0 c3000c00 7e00: 00000000 c3000c68 c3218a00 c3abcd20 00000001 c0221ee8 00000001 00000000 7e20: 00000000 00000000 00001388 00000000 c3000c04 c3000c68 c3bc29c0 00000001 7e40: c3bc29c4 00000001 c03f4af8 00000000 c39fe780 c3000c00 00000001 c045ab04 7e60: c3867eb8 c045a3bc c3000c70 00000000 00000000 c0229238 c3000c68 c0223210 7e80: c3000c00 c045aaf0 c045ab04 c0223230 c3000c68 c01daa14 c045ab04 c01da6e4 7ea0: c3000c68 00000000 c01daa14 c3000c68 c3867eb8 c01d9870 c38331a8 c3862f54 7ec0: c005b3b4 c3000c68 c3000c68 c3000c9c 00000002 c01da890 c3867ef9 c3000c68 7ee0: c3829f60 c01d97f4 00000000 c01d8470 c38918e0 c3aaf468 39383102 c300343a 7f00: 00000001 c0219660 c03f1768 c3000c00 00000000 c3000c68 00000002 c3aaf814 7f20: 00000001 00000101 c38918e0 c021b6e0 00000002 00000000 00000000 c3000c00 7f40: c38917c0 c021c418 00000064 00000064 00000101 c3867f60 c005b920 c3867f94 7f60: c3891830 c3aaf400 c3866000 c3aaf400 c3aaf800 00000000 c38918e0 c3aaf400 7f80: 00000012 00000000 00000000 c3837920 c00574a0 c3867f94 c3867f94 00000101 7fa0: 01010001 c3867fd4 c381bf48 c3867fd4 c381bf48 00000000 c021ba3c 00000000 7fc0: 00000000 00000000 00000000 c00573dc 00000000 00000000 c3867fd8 c3867fd8 7fe0: 00000000 00000000 00000000 00000000 00000000 c002ce88 00000000 ffff0000 [<c002fb10>] (__bug+0x1c/0x28) from [<c0094088>] (cache_alloc_refill+0x13c/0x594) [<c0094088>] (cache_alloc_refill+0x13c/0x594) from [<c0094574>] (__kmalloc+0x94/0xd0) [<c0094574>] (__kmalloc+0x94/0xd0) from [<c02a6a84>] (alloc_netdev_mq+0x48/0x1b0) [<c02a6a84>] (alloc_netdev_mq+0x48/0x1b0) from [<bf003398>] (vntwusb_found1+0x58/0x53c [vt6656_stage]) [<bf003398>] (vntwusb_found1+0x58/0x53c [vt6656_stage]) from [<c0223798>] (usb_probe_interface+0x130/0x180) [<c0223798>] (usb_probe_interface+0x130/0x180) from [<c01da6e4>] (driver_probe_device+0xac/0x164) [<c01da6e4>] (driver_probe_device+0xac/0x164) from [<c01d9870>] (bus_for_each_drv+0x50/0x90) [<c01d9870>] (bus_for_each_drv+0x50/0x90) from [<c01da890>] (device_attach+0x50/0x68) [<c01da890>] (device_attach+0x50/0x68) from [<c01d97f4>] (bus_probe_device+0x28/0x54) [<c01d97f4>] (bus_probe_device+0x28/0x54) from [<c01d8470>] (device_add+0x3b4/0x4f0) [<c01d8470>] (device_add+0x3b4/0x4f0) from [<c0221ee8>] (usb_set_configuration+0x524/0x5b8) [<c0221ee8>] (usb_set_configuration+0x524/0x5b8) from [<c0229238>] (generic_probe+0x5c/0xa0) [<c0229238>] (generic_probe+0x5c/0xa0) from [<c0223230>] (usb_probe_device+0x48/0x54) [<c0223230>] (usb_probe_device+0x48/0x54) from [<c01da6e4>] (driver_probe_device+0xac/0x164) [<c01da6e4>] (driver_probe_device+0xac/0x164) from [<c01d9870>] (bus_for_each_drv+0x50/0x90) [<c01d9870>] (bus_for_each_drv+0x50/0x90) from [<c01da890>] (device_attach+0x50/0x68) [<c01da890>] (device_attach+0x50/0x68) from [<c01d97f4>] (bus_probe_device+0x28/0x54) [<c01d97f4>] (bus_probe_device+0x28/0x54) from [<c01d8470>] (device_add+0x3b4/0x4f0) [<c01d8470>] (device_add+0x3b4/0x4f0) from [<c021b6e0>] (usb_new_device+0x100/0x174) [<c021b6e0>] (usb_new_device+0x100/0x174) from [<c021c418>] (hub_thread+0x9dc/0xeec) [<c021c418>] (hub_thread+0x9dc/0xeec) from [<c00573dc>] (kthread+0x78/0x80) [<c00573dc>] (kthread+0x78/0x80) from [<c002ce88>] (kernel_thread_exit+0x0/0x8) Code: e1a01000 e59f000c eb005014 e3a03000 (e5833000) ---[ end trace 2a51e0dbab9e4fbe ]--- note: khubd[152] exited with preempt_count 1 Signed-off-by: miaofng <miaofng@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-10-30Staging: Panel: prevent driver from calling misc_deregister twice on same ↵Peter Huewe
ressource This patch prevents the driver from calling misc_deregister twice on the same ressouce when unloading the driver. Unloading the driver without this patch results in a Kernel BUG like this: Panel driver version 0.9.5 registered on parport0 (io=0x378). BUG: unable to handle kernel paging request at 0000000000100108 IP: [<ffffffff803c02ee>] misc_deregister+0x2d/0x90 PGD 6caff067 PUD 762b7067 PMD 0 Oops: 0002 [#1] PREEMPT SMP last sysfs file: /sys/devices/platform/w83627hf.656/in8_input ... This patch fixes this issue, although maybe not in the best way possible :) linux version v2.6.32-rc1 - linus git tree, Di 29. Sep 01:10:18 CEST 2009 Signed-off-by: Peter Huewe <peterhuewe@gmx.de> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-10-30Staging: hv: fix oops in vmbus - missing #includeMilan Dadok
Add missing #includes to make hv module compile successfull. Signed-off-by: Milan Dadok <milan@dadok.name> Cc: Hank Janssen <hjanssen@microsoft.com> Cc: Haiyang Zhang <haiyangz@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-10-30Staging: hv: fix oops in vmbus - netvsc list_headMilan Dadok
Remove incorrect list_head usage. Variable of type list_head was used in some function's arguments as list item. Signed-off-by: Milan Dadok <milan@dadok.name> Cc: Hank Janssen <hjanssen@microsoft.com> Cc: Haiyang Zhang <haiyangz@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-10-30Staging: hv: fix oops in vmbus - udev eventsMilan Dadok
Fix typos in udev event send and guid variables copy Signed-off-by: Milan Dadok <milan@dadok.name> Cc: Hank Janssen <hjanssen@microsoft.com> Cc: Haiyang Zhang <haiyangz@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-10-30Staging: hv: Fix vmbus load hang caused by faulty data packingHank Janssen
Fix vmbus load hang caused by wrong data packing. Signed-off-by: Hank Janssen<hjanssen@microsoft.com> Signed-off-by: Haiyang Zhang <haiyangz@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-10-30Staging: hv: Fix null pointer error after vmbus loadingHaiyang Zhang
Fix null pointer error after vmbus loading. Remove code that checks for dev_name, the affected structure is kzalloc-ed prior to this routine, so it is always null at this stage. Signed-off-by: Hank Janssen <hjanssen@microsoft.com> Signed-off-by: Haiyang Zhang <haiyangz@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-10-30Staging: hv TODO patchesStephen Hemminger
Update for more items Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Cc: Hank Janssen <hjanssen@microsoft.com> Cc: Haiyang Zhang <haiyangz@microsoft.com>. Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-10-30tty: Mark generic_serial users as BROKENAlan Cox
There isn't much else I can do with these. I can find no hardware for any of them and no users. The code is broken. Signed-off-by: Alan Cox <alan@linux.intel.com> Cc: stable <stable@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-10-30libertas if_usb: Fix crash on 64-bit machinesDavid Woodhouse
On a 64-bit kernel, skb->tail is an offset, not a pointer. The libertas usb driver passes it to usb_fill_bulk_urb() anyway, causing interesting crashes. Fix that by using skb->data instead. This highlights a problem with usb_fill_bulk_urb(). It doesn't notice when dma_map_single() fails and return the error to its caller as it should. In fact it _can't_ currently return the error, since it returns void. So this problem was showing up only at unmap time, after we'd already suffered memory corruption by doing DMA to a bogus address. Signed-off-by: David Woodhouse <David.Woodhouse@intel.com> Cc: stable@kernel.org Acked-by: David S. Miller <davem@davemloft.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-10-30ath9k: fix misplaced semicolon on rate controlLuis R. Rodriguez
The patch e43419f9: ath9k: downgrade assert in rc.c for invalid rate downgraded an ASSERT to a WARN_ON() but also misplaced a semicolon at the end of the second check. What this did was force the rate control code to always return the rate even if we should have warned about it. Since this should not have happened anymore anyway this fix isn't critical as the proper rate would have been returned anyway. Cc: stable@kernel.org Reported-by: Jiri Slaby <jirislaby@gmail.com> Signed-off-by: Luis R. Rodriguez <lrodriguez@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-10-30b43: Fix DMA TX bounce buffer copyingMichael Buesch
b43 allocates a bouncebuffer, if the supplied TX skb is in an invalid memory range for DMA. However, this is broken in that it fails to copy over some metadata to the new skb. This patch fixes three problems: * Failure to adjust the ieee80211_tx_info pointer to the new buffer. This results in a kmemcheck warning. * Failure to copy the skb cb, which contains ieee80211_tx_info, to the new skb. This results in breakage of various TX-status postprocessing (Rate control). * Failure to transfer the queue mapping. This results in the wrong queue being stopped on saturation and can result in queue overflow. Signed-off-by: Michael Buesch <mb@bu3sch.de> Tested-by: Christian Casteyde <casteyde.christian@free.fr> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-10-30rt73usb.c : more idsXose Vazquez Perez
stolen from windows inf file(07/17/2009, 1.03.05.0000) Ovislink 0x1b75, 0x7318 MSI 0x0db0, 0x4600 WideTell 0x7167, 0x3840 Signed-off-by: Xose Vazquez Perez <xose.vazquez@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
generated by cgit v1.2.3 (git 2.39.1) at 2024-11-13 16:46:19 +0000