| Age | Commit message (Collapse) | Author |
|---|
|
This patch contains a few misc fixes which resolve a recently
reported issue. This patch has been a real team effort and has
received a lot of testing.
The first issue is that the ail lock needs to be held over a few
more operations. The lock thats added into gfs2_releasepage() may
possibly be a candidate for replacing with RCU at some future
point, but at this stage we've gone for the obvious fix.
The second issue is that gfs2_write_inode() can end up calling
a glock recursively when called from gfs2_evict_inode() via the
syncing code, so it needs a guard added.
The third issue is that we either need to not truncate the metadata
pages of inodes which have zero link count, but which we cannot
deallocate due to them still being in use by other nodes, or we need
to ensure that those pages have all made it through the journal and
ail lists first. This patch takes the former approach, but the
latter has also been tested and there is nothing to choose between
them performance-wise. So again, we could revise that decision
in the future.
Also, the inode eviction process is now better documented.
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
Tested-by: Bob Peterson <rpeterso@redhat.com>
Tested-by: Abhijith Das <adas@redhat.com>
Reported-by: Barry J. Marson <bmarson@redhat.com>
Reported-by: David Teigland <teigland@redhat.com>
|
|
There is a potential race during filesystem mounting which has recently
been reported. It occurs when the userland gfs_controld is able to
process requests fast enough that it tries to use the sysfs interface
before the lock module is properly initialised. This is a pretty
unusual case as normally the lock module initialisation is very quick
compared with gfs_controld.
This patch adds an interruptible completion which is used to ensure that
userland will wait for the initialisation of the lock module to
complete.
There are other potential solutions to this problem, but this is the
quickest at this stage and has been tested both with and without
mount.gfs2 present in the system.
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
Reported-by: David Booher <dbooher@adams.net>
|
|
Right now, there is nothing that forces the log to get flushed when a node
drops its rindex glock so that another node can grow the filesystem. If the
log doesn't get flushed, GFS2 can corrupt the sd_log_le_rg list in the
following way.
A node puts an rgd on the list in rg_lo_add(), and then the rindex glock is
dropped so the other node can grow the filesystem. When the node reacquires the
rindex glock, that rgd gets deleted in clear_rgrpdi() before ever being
removed from the list by gfs2_log_flush().
This code simply forces a log flush when the rindex glock is invalidated,
solving the problem.
Signed-off-by: Benjamin Marzinski <bmarzins@redhat.com>
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
|
|
* git://git.kernel.org/pub/scm/linux/kernel/git/steve/gfs2-2.6-fixes:
GFS2: Processes waiting on inode glock that no processes are holding
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/mmarek/kbuild-2.6
* 'trivial' of git://git.kernel.org/pub/scm/linux/kernel/git/mmarek/kbuild-2.6:
gfs2: Drop __TIME__ usage
isdn/diva: Drop __TIME__ usage
atm: Drop __TIME__ usage
dlm: Drop __TIME__ usage
wan/pc300: Drop __TIME__ usage
parport: Drop __TIME__ usage
hdlcdrv: Drop __TIME__ usage
baycom: Drop __TIME__ usage
pmcraid: Drop __DATE__ usage
edac: Drop __DATE__ usage
rio: Drop __DATE__ usage
scsi/wd33c93: Drop __TIME__ usage
scsi/in2000: Drop __TIME__ usage
aacraid: Drop __TIME__ usage
media/cx231xx: Drop __TIME__ usage
media/radio-maxiradio: Drop __TIME__ usage
nozomi: Drop __TIME__ usage
cyclades: Drop __TIME__ usage
|
|
The kernel already prints its build timestamp during boot, no need to
repeat it in random drivers and produce different object files each
time.
Cc: Steven Whitehouse <swhiteho@redhat.com>
Cc: cluster-devel@redhat.com
Signed-off-by: Michal Marek <mmarek@suse.cz>
|
|
Change each shrinker's API by consolidating the existing parameters into
shrink_control struct. This will simplify any further features added w/o
touching each file of shrinker.
[akpm@linux-foundation.org: fix build]
[akpm@linux-foundation.org: fix warning]
[kosaki.motohiro@jp.fujitsu.com: fix up new shrinker API]
[akpm@linux-foundation.org: fix xfs warning]
[akpm@linux-foundation.org: update gfs2]
Signed-off-by: Ying Han <yinghan@google.com>
Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Cc: Minchan Kim <minchan.kim@gmail.com>
Acked-by: Pavel Emelyanov <xemul@openvz.org>
Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Cc: Mel Gorman <mel@csn.ul.ie>
Acked-by: Rik van Riel <riel@redhat.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Hugh Dickins <hughd@google.com>
Cc: Dave Hansen <dave@linux.vnet.ibm.com>
Cc: Steven Whitehouse <swhiteho@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
This patch fixes a race in the GFS2 glock state machine that may
result in lockups. The symptom is that all nodes but one will
hang, waiting for a particular glock. All the holder records
will have the "W" (Waiting) bit set. The other node will
typically have the glock stuck in Exclusive mode (EX) with no
holder records, but the dinode will be cached. In other words,
an entry with "I:" will appear in the glock dump for that glock,
but nothing else.
The race has to do with the glock "Pending Demote" bit, which
can be set, then immediately reset, thus losing the fact that
another node needs the glock. The sequence of events is:
1. Something schedules the glock workqueue (e.g. glock request from fs)
2. The glock workqueue gets to the point between the test of the reply pending
bit and the spin lock:
if (test_and_clear_bit(GLF_REPLY_PENDING, &gl->gl_flags)) {
finish_xmote(gl, gl->gl_reply);
drop_ref = 1;
}
down_read(&gfs2_umount_flush_sem); <---- i.e. here
spin_lock(&gl->gl_spin);
3. In comes (a) the reply to our EX lock request setting GLF_REPLY_PENDING and
(b) the demote request which sets GLF_PENDING_DEMOTE
4. The following test is executed:
if (test_and_clear_bit(GLF_PENDING_DEMOTE, &gl->gl_flags) &&
gl->gl_state != LM_ST_UNLOCKED &&
gl->gl_demote_state != LM_ST_EXCLUSIVE) {
This resets the pending demote flag, and gl->gl_demote_state is not equal to
exclusive, however because the reply from the dlm arrived after we checked for
the GLF_REPLY_PENDING flag, gl->gl_state is still equal to unlocked, so
although we reset the GLF_PENDING_DEMOTE flag, we didn't then set the
GLF_DEMOTE flag or reinstate the GLF_PENDING_DEMOTE_FLAG.
The patch closes the timing window by only transitioning the
"Pending demote" bit to the "demote" flag once we know the
other conditions (not unlocked and not exclusive) are met.
Signed-off-by: Bob Peterson <rpeterso@redhat.com>
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
|
|
The ail flush code has always relied upon log flushing to prevent
it from spinning needlessly. This fixes it to wait on the last
I/O request submitted (we don't need to wait for all of it)
instead of either spinning with io_schedule or sleeping.
As a result cpu usage of gfs2_logd is much reduced with certain
workloads.
Reported-by: Abhijith Das <adas@redhat.com>
Tested-by: Abhijith Das <adas@redhat.com>
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
|
|
The deallocation code for directories in GFS2 is largely divided into
two parts. The first part deallocates any directory leaf blocks and
marks the directory as being a regular file when that is complete. The
second stage was identical to deallocating regular files.
Regular files have their data blocks in a different
address space to directories, and thus what would have been normal data
blocks in a regular file (the hash table in a GFS2 directory) were
deallocated correctly. However, a reference to these blocks was left in the
journal (assuming of course that some previous activity had resulted in
those blocks being in the journal or ail list).
This patch uses the i_depth as a test of whether the inode is an
exhash directory (we cannot test the inode type as that has already
been changed to a regular file at this stage in deallocation)
The original issue was reported by Chris Hertel as an issue he encountered
running bonnie++
Reported-by: Christopher R. Hertel <crh@samba.org>
Cc: Abhijith Das <adas@redhat.com>
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
|
|
* git://git.kernel.org/pub/scm/linux/kernel/git/steve/gfs2-2.6-nmw: (32 commits)
GFS2: Move all locking inside the inode creation function
GFS2: Clean up symlink creation
GFS2: Clean up mkdir
GFS2: Use UUID field in generic superblock
GFS2: Rename ops_inode.c to inode.c
GFS2: Inode.c is empty now, remove it
GFS2: Move final part of inode.c into super.c
GFS2: Move most of the remaining inode.c into ops_inode.c
GFS2: Move gfs2_refresh_inode() and friends into glops.c
GFS2: Remove gfs2_dinode_print() function
GFS2: When adding a new dir entry, inc link count if it is a subdir
GFS2: Make gfs2_dir_del update link count when required
GFS2: Don't use gfs2_change_nlink in link syscall
GFS2: Don't use a try lock when promoting to a higher mode
GFS2: Double check link count under glock
GFS2: Improve bug trap code in ->releasepage()
GFS2: Fix ail list traversal
GFS2: make sure fallocate bytes is a multiple of blksize
GFS2: Add an AIL writeback tracepoint
GFS2: Make writeback more responsive to system conditions
...
|
|
Now that there are no longer any exceptions to the normal inode
creation code path, we can move the parts of the locking code
which were duplicated in mkdir/mknod/create/symlink into the
inode create function.
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
|
|
This moves the symlink specific parts of inode creation
into the function where we initialise the rest of the
dinode. As a result we have one less place where we need
to look up the inode's buffer.
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
|
|
This moves the initialisation of the directory into the inode
creation functions to avoid having to duplicate the lookup
of the inode's buffer.
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
|
|
The VFS superblock structure now has a UUID field, so we can use that
in preference to the UUID field in the GFS2 superblock now.
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
|
|
This is the final part of the ops_inode.c/inode.c reordering. We
are left with a single file called inode.c which now contains
all the inode operations, as expected.
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
|
|
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
|
|
Now inode.c is empty.
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
|
|
This is in preparation to remove inode.c and rename ops_inode.c
to inode.c. Also most of the functions which were left in inode.c
relate to the creation and lookup of inodes. I'm intending to work
on consolidating some of that code, and its easier when its all in
one place.
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
|
|
Eventually there will only be a single caller of this code, so lets
move it where it can be made static at some future date.
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
|
|
This function was intended for debugging purposes, but it is not very
useful. If we want to know what is on disk then all we need is a
block number and gfs2_edit can give us much better information about
what is there. Otherwise, if we are interested in what is stored in
the in-core inode, it doesn't help us out there either.
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
|
|
This adds an increment of the link count when we add a new directory
entry, if that entry is itself a directory. This means that we no
longer need separate code to perform this operation.
Now that both adding and removing directory entries automatically
update the parent directory's link count if required, that makes
the code shorter and simpler than before.
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
|
|
When we remove an entry from a directory, we can save ourselves
some trouble if we know the type of the entry in question, since
if it is itself a directory, we can update the link count of the
parent at the same time as removing the directory entry.
In addition this patch also merges the rmdir and unlink code which
was almost identical anyway. This eliminates the calls to remove
the . and .. directory entries on each rmdir (not needed since the
directory will be deallocated, anyway) which was the only thing preventing
passing the dentry to gfs2_dir_del(). The passing of the dentry
rather than just the name allows us to figure out the type of the entry
which is being removed, and thus adjust the link count when required.
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
|
|
There are three users of gfs2_change_nlink which add to the link
count. Two of these are about to be removed in later patches, so
this means that there will no callers, when that happens allowing
removal of that function, also in a later patch.
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
|
|
Previously we marked all locks being promoted to a higher mode
with the try flag to avoid any potential deadlocks issues. The
DLM is able to detect these and report them in way that GFS2 can
deal with them correctly. So we can just request the required mode
and wait for a response without needing to perform this check.
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
|
|
To avoid any possible races relating to the link count, we need to
recheck it under the inode's glock in all cases where it matters.
Also to ensure we never get any nasty surprises, this patch also
ensures that once the link count has hit zero it can never be
elevated by rereading in data from disk.
The only place we cannot provide a proper solution is in rename
in the case where we are removing a target inode and we discover
that the target inode has been already unlinked on another node.
The race window is very small, and we return EAGAIN in this case
to indicate what has happened. The proper solution would be to move
the lookup parts of rename from the vfs into library calls which
the fs could call directly, but that is potentially a very big job
and this fix should cover most cases for now.
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
|
|
If the buffer is dirty or pinned, then as well as printing a
warning, we should also refuse to release the page in
question.
Currently this can occur if there is a race between mmap()ed
writers and O_DIRECT on the same file. With the addition of
->launder_page() in the future, we should be able to close
this gap.
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
|
|
In the recent patches to update the AIL list code, I managed to
forget that the ail list lock got dropped, even though I
added a comment specifically to remind myself :(
Reported-by: Barry Marson <bmarson@redhat.com>
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
|
|
The GFS2 fallocate code chooses a target size to for allocating chunks of
space. Whenever it can't find any resource groups with enough space free, it
halves its target. Since this target is in bytes, eventually it will no longer
be a multiple of blksize. As long as there is more space available in the
resource group than the target, this isn't a problem, since gfs2 will use the
actual space available, which is always a multiple of blksize. However,
when gfs couldn't fallocate a bigger chunk than the target, it was using the
non-blksize aligned number. This caused a BUG in later code that required
blksize aligned offsets. GFS2 now ensures that bytes is always a multiple of
blksize
Signed-off-by: Benjamin Marzinski <bmarzins@redhat.com>
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
|
|
Now that the whole dcache_hash_bucket crap is gone, go all the way and
also remove the weird locking layering violations for locking the hash
buckets. Add hlist_bl_lock/unlock helpers to move the locking into the
list abstraction instead of requiring each caller to open code it.
After all allowing for the bit locks is the whole point of these helpers
over the plain hlist variant.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Add a tracepoint for monitoring writeback of the AIL.
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
|
|
This patch adds writeback_control to writing back the AIL
list. This means that we can then take advantage of the
information we get in ->write_inode() in order to set off
some pre-emptive writeback.
In addition, the AIL code is cleaned up a bit to make it
a bit simpler to understand.
There is still more which can usefully be done in this area,
but this is a good start at least.
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
|
|
The GLF_LRU flag introduced in the previous patch can be
used to check if a glock is on the lru list when a new
holder is queued and if so remove it, without having first
to get the lru_lock.
The main purpose of this patch however is to optimise the
glocks left over when an inode at end of life is being
evicted. Previously such glocks were left with the GLF_LFLUSH
flag set, so that when reclaimed, each one required a log flush.
This patch resets the GLF_LFLUSH flag when there is nothing
left to flush thus preventing later log flushes as glocks are
reused or demoted.
In order to do this, we need to keep track of the number of
revokes which are outstanding, and also to clear the GLF_LFLUSH
bit after a log commit when only revokes have been processed.
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
|
|
This adds support for two new flags. One keeps track of whether
the glock is on the LRU list or not. The other isn't really a
flag as such, but an indication of whether the glock has an
attached object or not. This indication is reported without
any locking, which is ok since we do not dereference the object
pointer but merely report whether it is NULL or not.
Also, this fixes one place where a tracepoint was missing, which
was at the point we remove deallocated blocks from the journal.
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
|
|
This patch is designed to clean up GFS2's fsync
implementation and ensure that it really does get everything on
disk. Since ->write_inode() has been updated, we can call that
via the vfs library function sync_inode_metadata() and the only
remaining thing that has to be done is to ensure that we get
any revoke records in the log after the inode has been written back.
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
|
|
The buffer_in_io() macro has been unused for some time,
so remove it.
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
|
|
Rather than allowing the glocks to be scheduled for possible
reclaim as soon as they have exited the journal, this patch
delays their entry to the list until the glocks in question
are no longer in use.
This means that we will rely on the vm for writeback of all
dirty data and metadata from now on. When glocks are added
to the lru list they should be freeable much faster since all
the I/O required to free them should have already been completed.
This should lead to much better I/O patterns under low memory
conditions.
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
|
|
In order to ensure that the mapping stats (and thus the bdi) are correctly
updated, this patch changes the AIL writeback to use the filemap_datawrite
function. This helps prevent stalls in balance_dirty_pages() due to
large amounts of dirty metadata when there is little or no dirty data
around.
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
|
|
The GFS2 ->write_inode function should be more aggressive at writing
back to the filesystem. This adopts the XFS system of returning
-EAGAIN when the writeback has not been completely done. Also, we
now kick off in-place writeback when called with WB_SYNC_NONE,
but we only wait for it and flush the log when WB_SYNC_ALL is
requested.
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
|
|
The previous patches made function gfs2_dir_exhash_dealloc do nothing
but call function foreach_leaf. This patch simplifies the code by
moving the entire function foreach_leaf into gfs2_dir_exhash_dealloc.
Signed-off-by: Bob Peterson <rpeterso@redhat.com>
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
|
|
Function foreach_leaf used to look up the leaf block address and get
a buffer_head. Then it would call leaf_dealloc which did the same
lookup. This patch combines the two operations by making foreach_leaf
pass the leaf bh to leaf_dealloc.
Signed-off-by: Bob Peterson <rpeterso@redhat.com>
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
|
|
At the end of function gfs2_dir_exhash_dealloc, it was setting the dinode
type to "file" to prevent directory corruption in case of a crash.
It was doing so in its own journal transaction. This patch makes the
change occur when the last call is make to leaf_dealloc, since it needs
to rewrite the directory dinode at that time anyway.
Signed-off-by: Bob Peterson <rpeterso@redhat.com>
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
|
|
Since foreach_leaf is only called with leaf_dealloc as its only possible
call function, we can simplify the code by making it call leaf_dealloc
directly. This simplifies the code and eliminates the need for
leaf_call_t, the generic call method. This is a first small step in
simplifying the directory leaf deallocation code.
Signed-off-by: Bob Peterson <rpeterso@redhat.com>
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
|
|
On rare occasions we encounter gfs2 problems where an
invalid bitmap state transition is attempted. For example,
trying to "unlink" a free block. In these cases, there
is really no useful information logged to debug the problem.
This patch adds more debug details that should allow us to
more closely examine the problem and possibly solve it.
Signed-off-by: Bob Peterson <rpeterso@redhat.com>
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
|
|
This patch fixes a deadlock in GFS2 where two processes are trying
to reclaim an unlinked dinode:
One holds the inode glock and calls gfs2_lookup_by_inum trying to look
up the inode, which it can't, due to I_FREEING. The other has set
I_FREEING from vfs and is at the beginning of gfs2_delete_inode
waiting for the glock, which is held by the first. The solution is to
add a new non_block parameter to the gfs2_iget function that causes it
to return -ENOENT if the inode is being freed.
Signed-off-by: Bob Peterson <rpeterso@redhat.com>
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
|
|
This adds a couple of missing tests to avoid read-only nodes
from attempting to deallocate unlinked inodes.
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
Reported-by: Michel Andre de la Porte <madelaporte@ubi.com>
|
|
GFS2 was relying on the writepage code to write out the zeroed data for
fallocate. However, with FALLOC_FL_KEEP_SIZE set, this may be past i_size.
If it is, it will be ignored. To work around this, gfs2 now calls
write_dirty_buffer directly on the buffer_heads when FALLOC_FL_KEEP_SIZE
is set, and it's writing past i_size.
This version is just a cleanup of my last version
Signed-off-by: Benjamin Marzinski <bmarzins@redhat.com>
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
|
|
I did an audit of gfs2's transaction glock for bugzilla bug
658619 and ran across this:
In function gfs2_write_end, in the unlikely event that
gfs2_meta_inode_buffer returns an error, the code may forget
to unlock the transaction lock because the "failed" label
appears after the call to function gfs2_trans_end.
Signed-off-by: Bob Peterson <rpeterso@redhat.com>
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
|
|
Fixes generated by 'codespell' and manually reviewed.
Signed-off-by: Lucas De Marchi <lucas.demarchi@profusion.mobi>
|
|
* 'for-2.6.39/core' of git://git.kernel.dk/linux-2.6-block: (65 commits)
Documentation/iostats.txt: bit-size reference etc.
cfq-iosched: removing unnecessary think time checking
cfq-iosched: Don't clear queue stats when preempt.
blk-throttle: Reset group slice when limits are changed
blk-cgroup: Only give unaccounted_time under debug
cfq-iosched: Don't set active queue in preempt
block: fix non-atomic access to genhd inflight structures
block: attempt to merge with existing requests on plug flush
block: NULL dereference on error path in __blkdev_get()
cfq-iosched: Don't update group weights when on service tree
fs: assign sb->s_bdi to default_backing_dev_info if the bdi is going away
block: Require subsystems to explicitly allocate bio_set integrity mempool
jbd2: finish conversion from WRITE_SYNC_PLUG to WRITE_SYNC and explicit plugging
jbd: finish conversion from WRITE_SYNC_PLUG to WRITE_SYNC and explicit plugging
fs: make fsync_buffers_list() plug
mm: make generic_writepages() use plugging
blk-cgroup: Add unaccounted time to timeslice_used.
block: fixup plugging stubs for !CONFIG_BLOCK
block: remove obsolete comments for blkdev_issue_zeroout.
blktrace: Use rq->cmd_flags directly in blk_add_trace_rq.
...
Fix up conflicts in fs/{aio.c,super.c}
|
