Age | Commit message (Collapse) | Author |
|
* 'for-linus' of git://neil.brown.name/md: (27 commits)
md: add 'recovery_start' per-device sysfs attribute
md: rcu_read_lock() walk of mddev->disks in md_do_sync()
md: integrate spares into array at earliest opportunity.
md: move compat_ioctl handling into md.c
md: revise Kconfig help for MD_MULTIPATH
md: add MODULE_DESCRIPTION for all md related modules.
raid: improve MD/raid10 handling of correctable read errors.
md/raid10: print more useful messages on device failure.
md/bitmap: update dirty flag when bitmap bits are explicitly set.
md: Support write-intent bitmaps with externally managed metadata.
md/bitmap: move setting of daemon_lastrun out of bitmap_read_sb
md: support updating bitmap parameters via sysfs.
md: factor out parsing of fixed-point numbers
md: support bitmap offset appropriate for external-metadata arrays.
md: remove needless setting of thread->timeout in raid10_quiesce
md: change daemon_sleep to be in 'jiffies' rather than 'seconds'.
md: move offset, daemon_sleep and chunksize out of bitmap structure
md: collect bitmap-specific fields into one structure.
md/raid1: add takeover support for raid5->raid1
md: add honouring of suspend_{lo,hi} to raid1.
...
|
|
* git://git.linux-nfs.org/projects/trondmy/nfs-2.6: (75 commits)
NFS: Fix nfs_migrate_page()
rpc: remove unneeded function parameter in gss_add_msg()
nfs41: Invoke RECLAIM_COMPLETE on all new client ids
SUNRPC: IS_ERR/PTR_ERR confusion
NFSv41: Fix a potential state leakage when restarting nfs4_close_prepare
nfs41: Handle NFSv4.1 session errors in the delegation recall code
nfs41: Retry delegation return if it failed with session error
nfs41: Handle session errors during delegation return
nfs41: Mark stateids in need of reclaim if state manager gets stale clientid
NFS: Fix up the declaration of nfs4_restart_rpc when NFSv4 not configured
nfs41: Don't clear DRAINING flag on NFS4ERR_STALE_CLIENTID
nfs41: nfs41_setup_state_renewal
NFSv41: More cleanups
NFSv41: Fix up some bugs in the NFS4CLNT_SESSION_DRAINING code
NFSv41: Clean up slot table management
NFSv41: Fix nfs4_proc_create_session
nfs41: Invoke RECLAIM_COMPLETE
nfs41: RECLAIM_COMPLETE functionality
nfs41: RECLAIM_COMPLETE XDR functionality
Cleanup some NFSv4 XDR decode comments
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tj/percpu
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/percpu: (34 commits)
m68k: rename global variable vmalloc_end to m68k_vmalloc_end
percpu: add missing per_cpu_ptr_to_phys() definition for UP
percpu: Fix kdump failure if booted with percpu_alloc=page
percpu: make misc percpu symbols unique
percpu: make percpu symbols in ia64 unique
percpu: make percpu symbols in powerpc unique
percpu: make percpu symbols in x86 unique
percpu: make percpu symbols in xen unique
percpu: make percpu symbols in cpufreq unique
percpu: make percpu symbols in oprofile unique
percpu: make percpu symbols in tracer unique
percpu: make percpu symbols under kernel/ and mm/ unique
percpu: remove some sparse warnings
percpu: make alloc_percpu() handle array types
vmalloc: fix use of non-existent percpu variable in put_cpu_var()
this_cpu: Use this_cpu_xx in trace_functions_graph.c
this_cpu: Use this_cpu_xx for ftrace
this_cpu: Use this_cpu_xx in nmi handling
this_cpu: Use this_cpu operations in RCU
this_cpu: Use this_cpu ops for VM statistics
...
Fix up trivial (famous last words) global per-cpu naming conflicts in
arch/x86/kvm/svm.c
mm/slab.c
|
|
The RAID ioctls are only implemented in md.c, so the
handling for them should also be moved there from
fs/compat_ioctl.c.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Cc: Neil Brown <neilb@suse.de>
Cc: Andre Noll <maan@systemlinux.org>
Cc: linux-raid@vger.kernel.org
Signed-off-by: NeilBrown <neilb@suse.de>
|
|
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc
* 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc: (151 commits)
powerpc: Fix usage of 64-bit instruction in 32-bit altivec code
MAINTAINERS: Add PowerPC patterns
powerpc/pseries: Track previous CPPR values to correctly EOI interrupts
powerpc/pseries: Correct pseries/dlpar.c build break without CONFIG_SMP
powerpc: Make "intspec" pointers in irq_host->xlate() const
powerpc/8xx: DTLB Miss cleanup
powerpc/8xx: Remove DIRTY pte handling in DTLB Error.
powerpc/8xx: Start using dcbX instructions in various copy routines
powerpc/8xx: Restore _PAGE_WRITETHRU
powerpc/8xx: Add missing Guarded setting in DTLB Error.
powerpc/8xx: Fixup DAR from buggy dcbX instructions.
powerpc/8xx: Tag DAR with 0x00f0 to catch buggy instructions.
powerpc/8xx: Update TLB asm so it behaves as linux mm expects.
powerpc/8xx: Invalidate non present TLBs
powerpc/pseries: Serialize cpu hotplug operations during deactivate Vs deallocate
pseries/pseries: Add code to online/offline CPUs of a DLPAR node
powerpc: stop_this_cpu: remove the cpu from the online map.
powerpc/pseries: Add kernel based CPU DLPAR handling
sysfs/cpu: Add probe/release files
powerpc/pseries: Kernel DLPAR Infrastructure
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/arnd/playground
* 'compat-ioctl-merge' of git://git.kernel.org/pub/scm/linux/kernel/git/arnd/playground:
usbdevfs: move compat_ioctl handling to devio.c
lp: move compat_ioctl handling into lp.c
compat_ioctl: pass compat pointer directly to handlers
compat_ioctl: simplify lookup table
compat_ioctl: simplify calling of handlers
compat_ioctl: inline all conversion handlers
compat_ioctl: Remove BKL
compat_ioctl: remove all VT ioctl handling
|
|
* git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty-2.6: (58 commits)
tty: split the lock up a bit further
tty: Move the leader test in disassociate
tty: Push the bkl down a bit in the hangup code
tty: Push the lock down further into the ldisc code
tty: push the BKL down into the handlers a bit
tty: moxa: split open lock
tty: moxa: Kill the use of lock_kernel
tty: moxa: Fix modem op locking
tty: moxa: Kill off the throttle method
tty: moxa: Locking clean up
tty: moxa: rework the locking a bit
tty: moxa: Use more tty_port ops
tty: isicom: fix deadlock on shutdown
tty: mxser: Use the new locking rules to fix setserial properly
tty: mxser: use the tty_port_open method
tty: isicom: sort out the board init logic
tty: isicom: switch to the new tty_port_open helper
tty: tty_port: Add a kref object to the tty port
tty: istallion: tty port open/close methods
tty: stallion: Convert to the tty_port_open/close methods
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs-2.6
* 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs-2.6: (21 commits)
ext3: PTR_ERR return of wrong pointer in setup_new_group_blocks()
ext3: Fix data / filesystem corruption when write fails to copy data
ext4: Support for 64-bit quota format
ext3: Support for vfsv1 quota format
quota: Implement quota format with 64-bit space and inode limits
quota: Move definition of QFMT_OCFS2 to linux/quota.h
ext2: fix comment in ext2_find_entry about return values
ext3: Unify log messages in ext3
ext2: clear uptodate flag on super block I/O error
ext2: Unify log messages in ext2
ext3: make "norecovery" an alias for "noload"
ext3: Don't update the superblock in ext3_statfs()
ext3: journal all modifications in ext3_xattr_set_handle
ext2: Explicitly assign values to on-disk enum of filetypes
quota: Fix WARN_ON in lookup_one_len
const: struct quota_format_ops
ubifs: remove manual O_SYNC handling
afs: remove manual O_SYNC handling
kill wait_on_page_writeback_range
vfs: Implement proper O_SYNC semantics
...
|
|
* 'for-linus' of git://oss.sgi.com/xfs/xfs:
xfs: Fix error return for fallocate() on XFS
xfs: cleanup dmapi macros in the umount path
xfs: remove incorrect sparse annotation for xfs_iget_cache_miss
xfs: kill the STATIC_INLINE macro
xfs: uninline xfs_get_extsz_hint
xfs: rename xfs_attr_fetch to xfs_attr_get_int
xfs: simplify xfs_buf_get / xfs_buf_read interfaces
xfs: remove IO_ISAIO
xfs: Wrapped journal record corruption on read at recovery
xfs: cleanup data end I/O handlers
xfs: use WRITE_SYNC_PLUG for synchronous writeout
xfs: reset the i_iolock lock class in the reclaim path
xfs: I/O completion handlers must use NOFS allocations
xfs: fix mmap_sem/iolock inversion in xfs_free_eofblocks
xfs: simplify inode teardown
|
|
* git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core-2.6: (27 commits)
Driver core: fix race in dev_driver_string
Driver Core: Early platform driver buffer
sysfs: sysfs_setattr remove unnecessary permission check.
sysfs: Factor out sysfs_rename from sysfs_rename_dir and sysfs_move_dir
sysfs: Propagate renames to the vfs on demand
sysfs: Gut sysfs_addrm_start and sysfs_addrm_finish
sysfs: In sysfs_chmod_file lazily propagate the mode change.
sysfs: Implement sysfs_getattr & sysfs_permission
sysfs: Nicely indent sysfs_symlink_inode_operations
sysfs: Update s_iattr on link and unlink.
sysfs: Fix locking and factor out sysfs_sd_setattr
sysfs: Simplify iattr time assignments
sysfs: Simplify sysfs_chmod_file semantics
sysfs: Use dentry_ops instead of directly playing with the dcache
sysfs: Rename sysfs_d_iput to sysfs_dentry_iput
sysfs: Update sysfs_setxattr so it updates secdata under the sysfs_mutex
debugfs: fix create mutex racy fops and private data
Driver core: Don't remove kobjects in device_shutdown.
firmware_class: make request_firmware_nowait more useful
Driver-Core: devtmpfs - set root directory mode to 0755
...
|
|
devpts_get_tty() assumes that the inode passed in is associated with a valid
pty. But if the only reference to the pty is via a bind-mount, the inode
passed to devpts_get_tty() while valid, would refer to a pty that no longer
exists.
With a lot of debug effort, Grzegorz Nosek developed a small program (see
below) to reproduce a crash on recent kernels. This crash is a regression
introduced by the commit:
commit 527b3e4773628b30d03323a2cb5fb0d84441990f
Author: Sukadev Bhattiprolu <sukadev@us.ibm.com>
Date: Mon Oct 13 10:43:08 2008 +0100
To fix, ensure that the dentry associated with the inode has not yet been
deleted/unhashed by devpts_pty_kill().
See also:
https://lists.linux-foundation.org/pipermail/containers/2009-July/019273.html
tty-bug.c:
#define _GNU_SOURCE
#include <fcntl.h>
#include <sched.h>
#include <stdlib.h>
#include <sys/mount.h>
#include <sys/signal.h>
#include <unistd.h>
#include <stdio.h>
#include <linux/fs.h>
void dummy(int sig)
{
}
static int child(void *unused)
{
int fd;
signal(SIGINT, dummy); signal(SIGHUP, dummy);
pause(); /* cheesy synchronisation to wait for /dev/pts/0 to appear */
mount("/dev/pts/0", "/dev/console", NULL, MS_BIND, NULL);
sleep(2);
fd = open("/dev/console", O_RDWR);
dup(0); dup(0);
write(1, "Hello world!\n", sizeof("Hello world!\n")-1);
return 0;
}
int main(void)
{
pid_t pid;
char *stack;
stack = malloc(16384);
pid = clone(child, stack+16384, CLONE_NEWNS|SIGCHLD, NULL);
open("/dev/ptmx", O_RDWR|O_NOCTTY|O_NONBLOCK);
unlockpt(fd); grantpt(fd);
sleep(2);
kill(pid, SIGHUP);
sleep(1);
return 0; /* exit before child opens /dev/console */
}
Reported-by: Grzegorz Nosek <root@localdomain.pl>
Signed-off-by: Sukadev Bhattiprolu <sukadev@linux.vnet.ibm.com>
Tested-by: Serge Hallyn <serue@us.ibm.com>
Cc: stable <stable@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
|
|
Noticed that through glibc fallocate would return 28 rather than -1
and errno = 28 for ENOSPC. The xfs routines uses XFS_ERROR format
positive return error codes while the syscalls use negative return
codes. Fixup the two cases in xfs_vn_fallocate syscall to convert to
negative.
Signed-off-by: Jason Gunthorpe <jgunthorpe@obsidianresearch.com>
Reviewed-by: Eric Sandeen <sandeen@sandeen.net>
Signed-off-by: Alex Elder <aelder@sgi.com>
|
|
Stop the flag saving as we never mangle those in the unmount path, and
hide all the weird arguents to the dmapi code inside the
XFS_SEND_PREUNMOUNT / XFS_SEND_UNMOUNT macros.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Dave Chinner <david@fromorbit.com>
Signed-off-by: Alex Elder <aelder@sgi.com>
|
|
xfs_iget_cache_miss does not get called with the pag_ici_lock held, so
the __releases annotation is incorrect.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Dave Chinner <david@fromorbit.com>
Signed-off-by: Alex Elder <aelder@sgi.com>
|
|
Remove our own STATIC_INLINE macro. For small function inside
implementation files just use STATIC and let gcc inline it, and for
those in headers do the normal static inline - they are all small
enough to be inlined for debug builds, too.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Dave Chinner <david@fromorbit.com>
Signed-off-by: Alex Elder <aelder@sgi.com>
|
|
This function is too large to efficiently be inlined.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Dave Chinner <david@fromorbit.com>
Signed-off-by: Alex Elder <aelder@sgi.com>
|
|
Using a totally different name for the low-level get operation does
not fit the _int convention used in the rest of the attr code, so
rename it.
While we're at it also fix the prototype to use the normal convention
and mark it static as it's never used outside of xfs_attr.c.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Dave Chinner <david@fromorbit.com>
Reviewed-by: Eric Sandeen <sandeen@sandeen.net>
Signed-off-by: Alex Elder <aelder@sgi.com>
|
|
Currently the low-level buffer cache interfaces are highly confusing
as we have a _flags variant of each that does actually respect the
flags, and one without _flags which has a flags argument that gets
ignored and overriden with a default set. Given that very few places
use the default arguments get rid of the duplication and convert all
callers to pass the flags explicitly. Also remove the now confusing
_flags postfix.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Dave Chinner <david@fromorbit.com>
Signed-off-by: Alex Elder <aelder@sgi.com>
|
|
We set the IO_ISAIO flag for all read/write I/O since early Linux
2.6.x. Remove it as it has lost it's purpose long ago.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Dave Chinner <david@fromorbit.com>
Reviewed-by: Eric Sandeen <sandeen@sandeen.net>
Signed-off-by: Alex Elder <aelder@sgi.com>
|
|
Summary of problem:
If a journal record wraps at the physical end of the journal, it has to be
read in two parts in xlog_do_recovery_pass(): a read at the physical end and a
read at the physical beginning. If xlog_bread() has to re-align the first
read, the second read request does not take that re-alignment into account.
If the first read was re-aligned, the second read over-writes the end of the
data from the first read, effectively corrupting it. This can happen either
when reading the record header or reading the record data.
The first sanity check in xlog_recover_process_data() is to check for a valid
clientid, so that is the error reported.
Summary of fix:
If there was a first read at the physical end, XFS_BUF_PTR() returns where the
data was requested to begin. Conversely, because it is the result of
xlog_align(), offset indicates where the requested data for the first read
actually begins - whether or not xlog_bread() has re-aligned it.
Using offset as the base for the calculation of where to place the second read
data ensures that it will be correctly placed immediately following the data
from the first read instead of sometimes over-writing the end of it.
The attached patch has resolved the reported problem of occasional inability
to recover the journal (reporting "bad clientid").
Signed-off-by: Andy Poling <andy@realbig.com>
Reviewed-by: Alex Elder <aelder@sgi.com>
Signed-off-by: Alex Elder <aelder@sgi.com>
|
|
Currently we have different end I/O handlers for read vs the different
types of write I/O. But they are all very similar so we could just
use one with a few conditionals and reduce code size a lot.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Alex Elder <aelder@sgi.com>
Signed-off-by: Alex Elder <aelder@sgi.com>
|
|
The VM and I/O schedulers now expect us to use WRITE_SYNC_PLUG for
synchronous writeout. Right now I can't see any changes in performance
numbers with this, but we're getting some beating for not using it,
and the knowledge definitely could help the block code to make better
decisions.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Alex Elder <aelder@sgi.com>
Signed-off-by: Alex Elder <aelder@sgi.com>
|
|
The iolock is used for protecting reads, writes and block truncates
against each other. We have two classes of callers, the first one is
induced by a file operation and requires a reference to the inode be
held and not dropped after the operation is done:
- xfs_vm_vmap, xfs_vn_fallocate, xfs_read, xfs_write, xfs_splice_read,
xfs_splice_write and xfs_setattr are all implementations of VFS
methods that require a live inode
- xfs_getbmap and xfs_swap_extents are ioctl subcommand for which the
same is true
- xfs_truncate_file is only called on quota inodes just returned from
xfs_iget
- xfs_sync_inode_data does the lock just after an igrab()
- xfs_filestream_associate and xfs_filestream_new_ag take the iolock
on the parent inode of an inode which by VFS rules must be referenced
And we have various calls to truncate blocks past EOF or the whole
file when dropping the last reference to an inode. Unfortunately
lockdep complains when we do memory allocations that can recurse into
the filesystem in the first class because the second class happens to
take the same lock. To avoid this re-init the iolock in the beginning
of xfs_fs_clear_inode to get a new lock class.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Alex Elder <aelder@sgi.com>
Signed-off-by: Alex Elder <aelder@sgi.com>
|
|
When completing I/O requests we must not allow the memory allocator to
recurse into the filesystem, as we might deadlock on waiting for the
I/O completion otherwise. The only thing currently allocating normal
GFP_KERNEL memory is the allocation of the transaction structure for
the unwritten extent conversion. Add a memflags argument to
_xfs_trans_alloc to allow controlling the allocator behaviour.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reported-by: Thomas Neumann <tneumann@users.sourceforge.net>
Tested-by: Thomas Neumann <tneumann@users.sourceforge.net>
Reviewed-by: Alex Elder <aelder@sgi.com>
Signed-off-by: Alex Elder <aelder@sgi.com>
|
|
When xfs_free_eofblocks is called from ->release the VM might already
hold the mmap_sem, but in the write path we take the iolock before
taking the mmap_sem in the generic write code.
Switch xfs_free_eofblocks to only trylock the iolock if called from
->release and skip trimming the prellocated blocks in that case.
We'll still free them later on the final iput.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Alex Elder <aelder@sgi.com>
Signed-off-by: Alex Elder <aelder@sgi.com>
|
|
Currently the reclaim code for the case where we don't reclaim the
final reclaim is overly complicated. We know that the inode is clean
but instead of just directly reclaiming the clean inode we go through
the whole process of marking the inode reclaimable just to directly
reclaim it from the calling context. Besides being overly complicated
this introduces a race where iget could recycle an inode between
marked reclaimable and actually being reclaimed leading to panics.
This patch gets rid of the existing reclaim path, and replaces it with
a simple call to xfs_ireclaim if the inode was clean. While we're at
it we also use the slightly more lax xfs_inode_clean check we'd use
later to determine if we need to flush the inode here.
Finally get rid of xfs_reclaim function and place the remaining small
bits of reclaim code directly into xfs_fs_destroy_inode.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reported-by: Patrick Schreurs <patrick@news-service.com>
Reported-by: Tommy van Leeuwen <tommy@news-service.com>
Tested-by: Patrick Schreurs <patrick@news-service.com>
Reviewed-by: Alex Elder <aelder@sgi.com>
Signed-off-by: Alex Elder <aelder@sgi.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/ryusuke/nilfs2
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ryusuke/nilfs2: (49 commits)
nilfs2: separate wait function from nilfs_segctor_write
nilfs2: add iterator for segment buffers
nilfs2: hide nilfs_write_info struct in segment buffer code
nilfs2: relocate io status variables to segment buffer
nilfs2: do not return io error for bio allocation failure
nilfs2: use list_splice_tail or list_splice_tail_init
nilfs2: replace mark_inode_dirty as nilfs_mark_inode_dirty
nilfs2: delete mark_inode_dirty in nilfs_delete_entry
nilfs2: delete mark_inode_dirty in nilfs_commit_chunk
nilfs2: change return type of nilfs_commit_chunk
nilfs2: split nilfs_unlink as nilfs_do_unlink and nilfs_unlink
nilfs2: delete redundant mark_inode_dirty
nilfs2: expand inode_inc_link_count and inode_dec_link_count
nilfs2: delete mark_inode_dirty from nilfs_set_link
nilfs2: delete mark_inode_dirty in nilfs_new_inode
nilfs2: add norecovery mount option
nilfs2: add helper to get if volume is in a valid state
nilfs2: move recovery completion into load_nilfs function
nilfs2: apply readahead for recovery on mount
nilfs2: clean up get/put function of a segment usage
...
|
|
inode_change_ok already clears the SGID bit when necessary
so there is no reason for sysfs_setattr to carry code to do
the same, and it is good to kill the extra copy because when
I moved the code last in certain corner cases the code will
look at the wrong gid.
Acked-by: Serge Hallyn <serue@us.ibm.com>
Acked-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Eric W. Biederman <ebiederm@aristanetworks.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
|
|
These two functions do 90% of the same work and it doesn't significantly
obfuscate the function to allow both the parent dir and the name to change
at the same time. So merge them together to simplify maintenance, and
increase testing.
Acked-by: Tejun Heo <tj@kernel.org>
Acked-by: Serge Hallyn <serue@us.ibm.com>
Signed-off-by: Eric W. Biederman <ebiederm@aristanetworks.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
|
|
By teaching sysfs_revalidate to hide a dentry for
a sysfs_dirent if the sysfs_dirent has been renamed,
and by teaching sysfs_lookup to return the original
dentry if the sysfs dirent has been renamed. I can
show the results of renames correctly without having to
update the dcache during the directory rename.
This massively simplifies the rename logic allowing a lot
of weird sysfs special cases to be removed along with
a lot of now unnecesary helper code.
Acked-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Eric W. Biederman <ebiederm@aristanetworks.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
|
|
With lazy inode updates and dentry operations bringing everything
into sync on demand there is no longer any need to immediately
update the vfs or grab i_mutex to protect those updates as we
make changes to sysfs.
Acked-by: Serge Hallyn <serue@us.ibm.com>
Acked-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Eric W. Biederman <ebiederm@aristanetworks.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
|
|
Now that sysfs_getattr and sysfs_permission refresh the vfs
inode there is no need to immediatly push the mode change
into the vfs cache. Reducing the amount of work needed and
simplifying the locking.
Acked-by: Tejun Heo <tj@kernel.org>
Acked-by: Serge Hallyn <serue@us.ibm.com>
Signed-off-by: Eric W. Biederman <ebiederm@aristanetworks.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
|
|
With the implementation of sysfs_getattr and sysfs_permission
sysfs becomes able to lazily propogate inode attribute changes
from the sysfs_dirents to the vfs inodes. This paves the way
for deleting significant chunks of now unnecessary code.
While doing this we did not reference sysfs_setattr from
sysfs_symlink_inode_operations so I added along with
sysfs_getattr and sysfs_permission.
Acked-by: Tejun Heo <tj@kernel.org>
Acked-by: Serge Hallyn <serue@us.ibm.com>
Signed-off-by: Eric W. Biederman <ebiederm@aristanetworks.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
|
|
Lining up the functions in sysfs_symlink_inode_operations
follows the pattern in the rest of sysfs and makes things
slightly more readable.
Acked-by: Tejun Heo <tj@kernel.org>
Acked-by: Serge Hallyn <serue@us.ibm.com>
Signed-off-by: Eric W. Biederman <ebiederm@aristanetworks.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
|
|
Currently sysfs updates the timestamps on the vfs directory
inode when we create or remove a directory entry but doesn't
update the cached copy on the sysfs_dirent, fix that oversight.
Acked-by: Tejun Heo <tj@kernel.org>
Acked-by: Serge Hallyn <serue@us.ibm.com>
Signed-off-by: Eric W. Biederman <ebiederm@aristanetworks.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
|
|
Cleanly separate the work that is specific to setting the
attributes of a sysfs_dirent from what is needed to update
the attributes of a vfs inode.
Additionally grab the sysfs_mutex to keep any nasties from
surprising us when updating the sysfs_dirent.
Acked-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Eric W. Biederman <ebiederm@aristanetworks.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
|
|
The granularity of sysfs time when we keep it is 1 ns. Which
when passed to timestamp_trunc results in a nop. So remove
the unnecessary function call making sysfs_setattr slightly
easier to read.
Acked-by: Tejun Heo <tj@kernel.org>
Acked-by: Serge Hallyn <serue@us.ibm.com>
Signed-off-by: Eric W. Biederman <ebiederm@aristanetworks.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
|
|
Currently every caller of sysfs_chmod_file happens at either
file creation time to set a non-default mode or in response
to a specific user requested space change in policy. Making
timestamps of when the chmod happens and notification of
a file changing mode uninteresting.
Remove the unnecessary time stamp and filesystem change
notification, and removes the last of the explicit inotify
and donitfy support from sysfs.
Acked-by: Tejun Heo <tj@kernel.org>
Acked-by: Serge Hallyn <serue@us.ibm.com>
Signed-off-by: Eric W. Biederman <ebiederm@aristanetworks.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
|
|
Calling d_drop unconditionally when a sysfs_dirent is deleted has
the potential to leak mounts, so instead implement dentry delete
and revalidate operations that cause sysfs dentries to be removed
at the appropriate time.
Acked-by: Tejun Heo <tj@kernel.org>
Acked-by: Serge Hallyn <serue@us.ibm.com>
Signed-off-by: Eric W. Biederman <ebiederm@aristanetworks.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
|
|
Using dentry instead of d in the function name is what
several other filesystems are doing and it seems to be
a more readable convention.
Acked-by: Tejun Heo <tj@kernel.org>
Acked-by: Serge Hallyn <serue@us.ibm.com>
Signed-off-by: Eric W. Biederman <ebiederm@aristanetworks.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
|
|
The sysfs_mutex is required to ensure updates are and will remain
atomic with respect to other inode iattr updates, that do not happen
through the filesystem.
Acked-by: Serge Hallyn <serue@us.ibm.com>
Acked-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Eric W. Biederman <ebiederm@aristanetworks.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
|
|
Setting fops and private data outside of the mutex at debugfs file
creation introduces a race where the files can be opened with the wrong
file operations and private data. It is easy to trigger with a process
waiting on file creation notification.
Signed-off-by: Mathieu Desnoyers <mathieu.desnoyers@polymtl.ca>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Cc: stable <stable@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
|
|
Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
Acked-by: David P. Quigley <dpquigl@tycho.nsa.gov>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
|
|
Half the compat_ioctl handling is in devio.c, the other
half is in fs/compat_ioctl.c. This moves everything into
one place for consistency.
As a positive side-effect, push down the BKL into the
ioctl methods.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Greg Kroah-Hartman <gregkh@suse.de>
Cc: Alan Stern <stern@rowland.harvard.edu>
Cc: Oliver Neukum <oliver@neukum.org>
Cc: Alon Bar-Lev <alon.barlev@gmail.com>
Cc: David Vrabel <david.vrabel@csr.com>
Cc: linux-usb@vger.kernel.org
|
|
Handling for LPSETTIMEOUT can easily be done in lp_ioctl, which
is the only user. As a positive side-effect, push the BKL
into the ioctl methods.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Greg Kroah-Hartman <gregkh@suse.de>
|
|
Instead of having each handler call compat_ptr, we can now
convert the pointer once and pass that to each handler.
This saves a little bit of both source and object code size.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
The compat_ioctl table now only contains entries for
COMPATIBLE_IOCTL, so we only need to know if a number
is listed in it or now.
As an optimization, we hash the table entries with a
reversible transformation to get a more uniform distribution
over it, sort the table at startup and then guess the
position in the table when an ioctl number gets called
to do a linear search from there.
With the current set of ioctl numbers and the chosen
transformation function, we need an average of four
steps to find if a number is in the set, all of the
accesses within one or two cache lines.
This at least as good as the previous hash table
approach but saves 8.5 kb of kernel memory.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
The compat_ioctl array now contains only entries for ioctl numbers
that do not require a separate handler. By special-casing the
ULONG_IOCTL case in the do_ioctl_trans function, we can kill the
final use of a function pointer in the array.
text data bss dec hex filename
7539 13352 2080 22971 59bb before/fs/compat_ioctl.o
7910 8552 2080 18542 486e after/fs/compat_ioctl.o
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
This makes all ioctl conversion handlers called from
a single switch statement, leaving only COMPATIBLE_IOCTL
and ULONG_IOCTL statements in the table. This is somewhat
more space efficient and also lets us simplify the
handling of the lookup table significantly.
before:
text data bss dec hex filename
7619 14024 2080 23723 5cab obj/fs/compat_ioctl.o
after:
7567 13352 2080 22999 59d7 obj/fs/compat_ioctl.o
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|