summaryrefslogtreecommitdiff
path: root/include/linux
AgeCommit message (Collapse)Author
2012-05-23core: Fix for Basic Suspend/Resume to workramesh.chandrasekaran
Signed-off-by: ramesh.chandrasekaran <ramesh.chandrasekaran@stericsson.com>
2012-05-22power: ab8500: bm: Temporary workaround to reuse old ab8500 platform data ↵Philippe Langlais
managment Signed-off-by: Philippe Langlais <philippe.langlais@linaro.org>
2012-05-22ab8500: gpadc: Use new mainline ab8500_gpadc_get() with name parameterPhilippe Langlais
Signed-off-by: Philippe Langlais <philippe.langlais@linaro.org>
2012-05-22mfd ab8500: bm: Fix the bat_type field lack in ab8500_bm_dataPhilippe Langlais
Signed-off-by: Philippe Langlais <philippe.langlais@linaro.org>
2012-05-22u5500: timed output driver for ab5500 vibratorShreshtha Kumar Sahu
Simple timed output vibrator driver for AB5500 MFD chips. This chip supports Rotary and Linear vibrator hardware types. Resonance frequency of 100-198 Hz is supported. ST-Ericsson ID: WP 256408 Signed-off-by: Avinash A <Avinash.a@stericsson.com> Signed-off-by: Robert Marklund <robert.marklund@stericsson.com> u5500: enable vibrator when new timeout is requested with this patch new timeout value will be accepted/updated even if vibrator is already executing. ST-Ericsson ID: 360178 Signed-off-by: Avinash A <Avinash.a@stericsson.com> vibra:Remove unnecessary assignment of dev->parent Remove unnecessary assignment of dev->parent, because of this during timed out class unregister it is trying to free resources of parent which does not exist ST-Ericsson ID: 410065 Signed-off-by: Naga Radhesh <naga.radheshy@stericsson.com> u5500: Add vibra end of life support Detect and disable vibra when vibra end of life(eol) condition is detected at boot sequence. ST-Ericsson ID: 265890 Signed-off-by: Rajagopala V <rajagopala.v@stericsson.com>
2012-05-22u8500: Vibrator: Timed output vibrator driverMarcin Mielczarczyk
ST-Ericsson vibrator driver which registers in Android specific timed output device class. Signed-off-by: Marcin Mielczarczyk <marcin.mielczarczyk@tieto.com> Signed-off-by: Jerzy Kasenberg <jerzy.kasenberg@tieto.com> Signed-off-by: Mian Yousaf Kaukab <mian.yousaf.kaukab@stericsson.com> Timed output vibrator: New functionality. This patch allows to form the vibration characteristic using few parameters defined in the platform data: - boost level and period for start condition - on level as moderate speed - off level and period for brake condition Detailed information can be found here: Documentation\DocBook\ste_timed_vibra.html Signed-off-by: Grzegorz Sygieda <grzegorz.sygieda@tieto.com> Signed-off-by: Krzysztof Antonowicz <krzysztof.antonowicz@tieto.com> Signed-off-by: srinidhi kasagar <srinidhi.kasagar@stericsson.com> vibrator: remove board specific control of vibrator Platform specific control of vibrator should be present in board file (here board-mop500.c). So, for example if GPIO pins are used to control the vibrator, its control function implemenation should be in board file. This patch provides the callback function support in the driver for the same. Signed-off-by: Shreshtha Kumar Sahu <shreshthakumar.sahu@stericsson.com> android: vibrator: dont directly access ktime_t members Use ktime helper functions for converting ktime values Signed-off-by: Mian Yousaf Kaukab <mian.yousaf.kaukab@stericsson.com> u8500: vibra: linear vibrators using vibra-pwm Linear vibrators operate on thier required resonance frequency (for COPAL and AAC its ~150Hz). This can be provided using AUDIO DA5 path. This software *workaround* enables linear vibrators using AB8500 vibra-pwm by generating required resonace frequency using software. In addition this patch provides support for separate platform data for Linear and Rotarty vibrators. Signed-off-by: Shreshtha Kumar Sahu <shreshthakumar.sahu@stericsson.com> u8500: vibra: disable vibrator after vibration This patch disables vibrator i.e. configures the PWM duty cycle to zero after vibration duration is over. Signed-off-by: Philippe Langlais <philippe.langlais@linaro.org> u8500: optimize: linear vibra drv using vibra-pwm This patch optimizes the current implementation of "linear vibrator driver using vibra-pwm". Current implementation is CPU intensive and uses 100% of a CPU for the time period vibrator is used. ST-Ericsson ID: ER 349958 Signed-off-by: Avinash A <Avinash.a@stericsson.com> u8500: vibra: fix sleeping fn. in atomic context sleepable call - flush_workqueue called from atomic context of vibra_enable. ST-Ericsson ID: ER 351276 Signed-off-by: Avinash A <Avinash.a@stericsson.com> u8500: vibra: remove race condition in timer operation In situation described below, vibra driver can hang. In a scenario where vibra_enable is called and vibrator is running i.e. vibra_work is scheduled and vibra_timer. Suppose vibra_timer is started and has not expired yet. At this moment if vibra_work starts executing and acquires the vibra_lock and just before hrtimer_cancel is called, if old timer expires and timer callback starts executing then it will try to acquire vibra_lock and hence it will wait for vibra_lock, as it is already acquired by vibra_work. Now vibra_work->hrtimer_cancel will wait for timer callback to complete and timer callback will wait for vibra_lock to be free so that it can complete. This result in recursive waiting for vibra_lock and hence deadlock. As timer callback is running in interrupt context so above deadlock may trigger watchdog. ST-Ericsson ID: 405366 Signed-off-by: Shreshtha Kumar Sahu <shreshthakumar.sahu@stericsson.com> u8500: vibra: remove race condition in open In situation described below, vibra driver can hang. vibra_enable takes the vibra_lock and timer expires then timer callback will spin for vibra_lock. If vibra_enable tries to do hrtimer_cancel then it will wait for timer callback to complete. In above situation hrtimer_cancel will wait for timer callback to complete and timer callback will wait for vibra_lock to be free so that it can complete. This result in recursive waiting for vibra_lock and hence deadlock. As timer callback is running in interrupt context so above deadlock may trigger watchdog. ST-Ericsson ID: 407253 Signed-off-by: Shreshtha Kumar Sahu <shreshthakumar.sahu@stericsson.com> vibra:Remove unnecessary assignment of dev->parent Remove unnecessary assignment of dev->parent, because of this during timed out class unregister it is trying to free resources of parent which does not exist Signed-off-by: Naga Radhesh <naga.radheshy@stericsson.com>
2012-05-22leds-pwm:Support HW blink functionalityNaga Radhesh
Support LED HW blink functionlity, by registering blink set function. ST-Ericsson ID: 366316 ST-Ericsson Linux next: NA ST-Ericsson FOSS-OUT ID: Trivial Change-Id:Ice4f7b786bd2acdd115ca920de6deb2e83d80ea3 Signed-off-by: Naga Radhesh <naga.radheshy@stericsson.com> Reviewed-on: http://gerrit.lud.stericsson.com/gerrit/50126 Reviewed-by: Srinidhi KASAGAR <srinidhi.kasagar@stericsson.com>
2012-05-22ab8500-pwm:AB8505:Enable support for PWMLED blinkNaga Radhesh
Enable support for PWM OUT LED blinking for AB8505.Instead of having 3 pwm instances from ab8500 core file add it as platform data. ST-Ericsson ID: 366316 ST-Ericsson Linux next: NA ST-Ericsson FOSS-OUT ID: Trivial Change-Id:I63cd5510d3c1071613871946f7c624d2e2026568 Signed-off-by: Naga Radhesh <naga.radheshy@stericsson.com> Reviewed-on: http://gerrit.lud.stericsson.com/gerrit/45669 Reviewed-by: QABUILD Reviewed-by: Arun MURTHY <arun.murthy@stericsson.com> Reviewed-by: Srinidhi KASAGAR <srinidhi.kasagar@stericsson.com>
2012-05-22ab8500: mfd: Add interrupt debugBengt Jonsson
This patch adds an entry in debugfs to check number of interrupts from the AB. ST-Ericsson ID: 366316 ST-Ericsson Linux next: - ST-Ericsson FOSS-OUT ID: Trivial Change-Id: I09d391e7d755773f7438fa1263371145ba91c1f1 Signed-off-by: Bengt Jonsson <bengt.g.jonsson@stericsson.com> Reviewed-on: http://gerrit.lud.stericsson.com/gerrit/49036 Reviewed-by: Rabin VINCENT <rabin.vincent@stericsson.com>
2012-05-22mfd/ab8500: remaining mainline differencesLinus Walleij
This collects the AB9540 changes that could not be included in the mainline patch set due to differences in the internal code (esp re GPIO driver). Signed-off-by: Linus Walleij <linus.walleij@stericsson.com> Change-Id: Ia5ed55f1f44da923e8b9ae22f9b47b681bbb8403 Reviewed-on: http://gerrit.lud.stericsson.com/gerrit/47743
2012-05-22mfd: ab8500: implement api to dump all registersMian Yousaf Kaukab
ST-Ericsson Linux next: - ST-Ericsson ID: 402239 ST-Ericsson FOSS-OUT ID: Trivial Change-Id: I46b16d38d8d521e0f994e6a92a0b3892eaa5382f Signed-off-by: Mian Yousaf Kaukab <mian.yousaf.kaukab@stericsson.com> Reviewed-on: http://gerrit.lud.stericsson.com/gerrit/46910 Reviewed-by: Linus WALLEIJ <linus.walleij@stericsson.com> Reviewed-by: QABUILD Reviewed-by: Jonas ABERG <jonas.aberg@stericsson.com>
2012-05-22mfd: abx500: add api to dump all registersMian Yousaf Kaukab
Some drivers can detect sub system failures e.g. shared memory driver can detect modem sub system failures. It would be helpful in analyzing these failures if AB register dump is available at that point. This patch adds the API for the drivers to dump AB registers in the kernel log. ST-Ericsson Linux next: - ST-Ericsson ID: 402239 ST-Ericsson FOSS-OUT ID: Trivial Change-Id: I544e40b4e2f68a80a6aa73135d4a15c433ec6a8b Signed-off-by: Mian Yousaf Kaukab <mian.yousaf.kaukab@stericsson.com> Reviewed-on: http://gerrit.lud.stericsson.com/gerrit/46909 Reviewed-by: Linus WALLEIJ <linus.walleij@stericsson.com> Reviewed-by: QABUILD Reviewed-by: Jonas ABERG <jonas.aberg@stericsson.com>
2012-05-22ab5500_bm: Add interface to reinit FG algorithmArun Murthy
A function has been added to enable reinitialisation of the fuel gauge algorithm. This can be used to to reinitialise with a different battery voltage at start-up, for verification reasons. ST-Ericsson Linux next: NA ST-Ericsson ID: 357480 ST-Ericsson FOSS-OUT ID: Trivial Change-Id: I80d6e770a57affbe7f3af0fdf82052ca1b7fe8b4 Signed-off-by: Arun Murthy <arun.murthy@stericsson.com> Reviewed-on: http://gerrit.lud.stericsson.com/gerrit/40903 Reviewed-by: QATOOLS Reviewed-by: QABUILD Reviewed-by: Srinidhi KASAGAR <srinidhi.kasagar@stericsson.com>
2012-05-22leds: Pull the HWEN gpio low when brightness is 0Avinash A
When the brightness is zero the HWEN gpio line should be pulled low in order to achieve lowest power consumption on LM3530 ST-Ericsson ID: 373161 ST-Ericsson Linux next: NA ST-Ericsson FOSS-OUT ID: Trivial Change-Id: I5fc0ad22022a9fcfc66683c59a2df27359c90371 Signed-off-by: Avinash A <Avinash.a@stericsson.com> Reviewed-on: http://gerrit.lud.stericsson.com/gerrit/37248 Reviewed-by: Avinash A <avinash.a@stericsson.com> Tested-by: Avinash A <avinash.a@stericsson.com> Reviewed-by: QABUILD Reviewed-by: Rabin VINCENT <rabin.vincent@stericsson.com>
2012-05-22ab5500: enable GPADC-0 and provide sysfs interfceShreshtha Kumar Sahu
This patch enables GPADC-0 to convert from voltage range 0 to 1.8v and also adds sysfs interface for reading gpadc ch-0. "/sys/devices/platform/ab5500-core.0/ab5500-adc.0/adc0volt" ST-Ericsson ID: 370066 ST-Ericsson Linux next: NA ST-Ericsson FOSS-OUT ID: Trivial Change-Id: Ic23caa22ff4e10d3dbb151e10eb4625ec5d7078a Signed-off-by: Shreshtha Kumar Sahu <shreshthakumar.sahu@stericsson.com> Reviewed-on: http://gerrit.lud.stericsson.com/gerrit/36216 Reviewed-by: QATOOLS Reviewed-by: QABUILD Reviewed-by: Linus WALLEIJ <linus.walleij@stericsson.com>
2012-05-22u8500: Configure SysClkReqRfClkBufKennet Wallden
Added the possibility to configure SysCl1kReqRfClkBuf - SysClk8ReqRfClkBuf ST-Ericsson ID: 360052 ST-Ericsson Linux next: N/A ST-Ericsson FOSS-OUT ID: Trivial Change-Id: I7813ae4a73701d874e39556c60608ff66e1d016d Signed-off-by: Kennet Wallden <kennet.wallden@stericsson.com> Reviewed-on: http://gerrit.lud.stericsson.com/gerrit/32261 Reviewed-by: Karl-Johan PERNTZ <karl-johan.perntz@stericsson.com> Reviewed-by: Bengt JONSSON <bengt.g.jonsson@stericsson.com>
2012-05-22gpadc.h regression after 3.2 update to merge somewherePhilippe Langlais
2012-05-22ab8500: Separate regulator and MFD platform dataBengt Jonsson
The ab8500 MFD should not have knowledge about regulator- specific platform data like number of regulators and regulator registers. As the regulator platform data is about to grow with external regulators, this information is moved to a new structure provided by the regulator driver. ST-Ericsson ID: 282517 ST-Ericsson Linux next: - ST-Ericsson FOSS-OUT ID: Trivial Change-Id: I77d03ffcc3273b0659dea3cffd8191b8c94b83d2 Signed-off-by: Bengt Jonsson <bengt.g.jonsson@stericsson.com> Reviewed-on: http://gerrit.lud.stericsson.com/gerrit/33615 Reviewed-by: QABUILD Reviewed-by: Yvan FILLION <yvan.fillion@stericsson.com>
2012-05-22u5500: leds: add ab5500v2 HVLED blink featureShreshtha Kumar Sahu
This patch adds support for AB5500 v2.0 HVLED hardware blink feature in existing driver. ST-Ericsson Linux next: ER 336280 ST-Ericsson FOSS-OUT ID: Trivial ST-Ericsson ID: ER 364964 Change-Id:I73e1caeac14774b7d3e03d1e7c5e4bd16fc7d06a Signed-off-by: Shreshtha Kumar Sahu <shreshthakumar.sahu@stericsson.com> Reviewed-on: http://gerrit.lud.stericsson.com/gerrit/27547 Reviewed-by: Srinidhi KASAGAR <srinidhi.kasagar@stericsson.com> Reviewed-on: http://gerrit.lud.stericsson.com/gerrit/32746 Reviewed-by: Naga RADHESH Y <naga.radheshy@stericsson.com> Tested-by: Naga RADHESH Y <naga.radheshy@stericsson.com>
2012-05-22ux500: Start crash dump through SW resetPer Fransson
When using kexec/kdump without an crash kernel image loaded: * clean the caches and write the crash_notes * perform a restart ST-Ericsson ID: 340331 Change-Id: I1ae34ed2b5e43da4849650a8a7d2f1e453dcbe93 Signed-off-by: Per Fransson <per.xx.fransson@stericsson.com> Reviewed-on: http://gerrit.lud.stericsson.com/gerrit/32678 Reviewed-by: Jonas ABERG <jonas.aberg@stericsson.com> Reviewed-by: Srinidhi KASAGAR <srinidhi.kasagar@stericsson.com>
2012-05-22mfd: abx500: input: Add accessory detection driverPhilippe Langlais
Add driver for the accessory detection block of abx500 PMIC. Signed-off-by: Virupax Sadashivpetimath <virupax.sadashivpetimath@stericsson.com> Signed-off-by: Philippe Langlais <philippe.langlais@stericsson.com>
2012-05-22stmpe: Fix warningPhilippe Langlais
Signed-off-by: Philippe Langlais <philippe.langlais@stericsson.com>
2012-05-22ab5500 mfd:input:misc: Add accessory driverPhilippe Langlais
Add driver for the accessory detection block of the ab5500 PMIC. The common functions from the 8500 accessory driver are moved to abx500-accdet generic driver. This generic driver uses callbacks registerd from the 8500 and 5500 specific driver to work as a accessory driver for a perticluar platform. Signed-off-by: Virupax Sadashivpetimath <virupax.sadashivpetimath@stericsson.com> Signed-off-by: Robert Marklund <robert.marklund@stericsson.com>
2012-05-22power: ab5500-bm: update usb state change interface to otg notifierArun Murthy
Remove usb_state_changed() exported function. Replace it with otg notifier call. This makes static_di redundant so it is removed. Moreover, there is no need to protect usb_state.usb_changed with usb_lock. So usb_lock is removed as well. Usb state is fabricated based on the reported mA. State is not as accurate as reading it directly from the usb controller. This should not matter as battery- manager driver should care more about mA than the state anyway. Change-Id: I180062a87ca773b5c215aee3ef1c60315d309d42 Signed-off-by: Arun Murthy <arun.murthy@stericsson.com> Signed-off-by: Mian Yousaf Kaukab <mian.yousaf.kaukab@stericsson.com> Reviewed-on: http://gerrit.lud.stericsson.com/gerrit/31577 Reviewed-by: Srinidhi KASAGAR <srinidhi.kasagar@stericsson.com>
2012-05-22ab5500 mfd: usb:Migrate the patches to kernel 3.0Philippe Langlais
Following patches for usb driver are manually merged to kernel 3.0 d11e52a ux500: usb: add usb device mode support on u5500 1fecc55 ux500: usb: enabling adb and ACM functionality in u5500_defconfig 2847bf4 ux500: usb: error handling in musb for u5500 37f22da ux500: usb: U5500 v2 update e1b079d ux500: usb: Fix for enumeration when ON with cable 181701a ux500: usb: Fix for V2 emmc2 boot USB device issue 3a60721 mach-ux500: Handle the LinkStatus register. 086a83e usb: ux500: usb gpio enable/disable in pair Signed-off-by: Avinash Kumar <avinash.kumar@stericsson.com>
2012-05-22ux500: Thermal power offDaniel Willerud
To determine whether the system had a thermal power off or a regular software power off upon the next boot, the system must utilize the thermal power off bit, ThDB8500SWoff, in AB8500 register STw4500Ctrl1. ST-Ericsson ID: 354533 ST-Ericsson Linux next: N/A ST-Ericsson FOSS-OUT ID: Trivial Change-Id: I07440dcdc39a86cb72aa95d86411a1f020b05cae Signed-off-by: Daniel Willerud <daniel.willerud@stericsson.com> Reviewed-on: http://gerrit.lud.stericsson.com/gerrit/28515 Reviewed-by: QABUILD Reviewed-by: Jonas ABERG <jonas.aberg@stericsson.com>
2012-05-22hwmon: Adding notifiers to hwmonDaniel Willerud
ST-Ericsson ID: 354533 ST-Ericsson Linux next: Not tested ST-Ericsson FOSS-OUT ID: Trivial Change-Id: I068a3c801405b6f7ca2b78df7cd9f7461ed8738b Signed-off-by: Daniel Willerud <daniel.willerud@stericsson.com> Reviewed-on: http://gerrit.lud.stericsson.com/gerrit/29502 Reviewed-by: QABUILD Reviewed-by: Jonas ABERG <jonas.aberg@stericsson.com>
2012-05-22ab5500: move to separate headerRabin Vincent
Use new include/linux/mfd/abx500/ab5500.h instead of upstream include/linux/mfd/ab5500/ab5500.h file Change-Id: I11dd2a23323229096b6e0ee2d4dc68cab8919bff
2012-05-22ARM: 6373/1: tc35892-gpio: add setup/remove callbacksRabin Vincent
For board-specific initialization. Change-Id: I8a13382bf91608b9edf2e712cff157b14e20848a Cc: Samuel Ortiz <sameo@linux.intel.com> Cc: linux-kernel@vger.kernel.org Acked-by: Linus Walleij <linus.walleij@stericsson.com> Signed-off-by: Rabin Vincent <rabin.vincent@stericsson.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk> Signed-off-by: Virupax Sadashivpetimath <virupax.sadashivpetimath@stericsson.com>
2012-05-22MFD: tc35892: Optimize power save settings for suspendDavid Paris
Compared to HSI GPIO V3.1, register 0x82 is set with a different value 0x82 = 0xE (HSI GPIO V3.1) 0x82 = 0xF (on android) In case of android, it seems that GPIO reset should be applied to reach 13uA of consumption on TC35892 when AP in DeepSleep Change-Id: I64eaa4304fcd9f71546cadba0aa703c91b6075df Signed-off-by: David Paris <david.paris-nonst@stericsson.com> Signed-off-by: Jonas Aaberg <jonas.aberg@stericsson.com>
2012-05-22mfd: Add Toshiba's TC35892 MFD coreRabin Vincent
The TC35892 I/O Expander provides 24 GPIOs, a keypad controller, timers, and a rotator wheel interface. This patch adds the MFD core. Acked-by: Linus Walleij <linus.walleij@stericsson.com> Signed-off-by: Rabin Vincent <rabin.vincent@stericsson.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com> Change-Id: Ib9fe0f306c241284be763e8c65ce1bee44d22d5a Signed-off-by: Virupax Sadashivpetimath <virupax.sadashivpetimath@stericsson.com>
2012-05-22MFD: tc3589x: Optimize power save settings for suspendDavid Paris
Compared to HSI GPIO V3.1, register 0x82 is set with a different value 0x82 = 0xE (HSI GPIO V3.1) 0x82 = 0xF (on android) In case of android, it seems that GPIO reset should be applied to reach 13uA of consumption on TC3589x when AP in DeepSleep Change-Id: I64eaa4304fcd9f71546cadba0aa703c91b6075df Signed-off-by: David Paris <david.paris-nonst@stericsson.com> Signed-off-by: Jonas Aaberg <jonas.aberg@stericsson.com> Reviewed-on: http://gerrit.lud.stericsson.com/gerrit/17640
2012-05-22hwmon: ab5500: support for battery temp monitorRajagopala V
add support for battery temperature monitor ST-Ericsson Linux next: NA ST-Ericsson ID: WP257616 ST-Ericsson FOSS-OUT ID: NA Change-Id: I344947ed41b4dd0a49abcb28e57b7b3c697dc57d Signed-off-by: Rajagopala V <rajagopala.v@stericsson.com> Reviewed-on: http://gerrit.lud.stericsson.com/gerrit/28233 Reviewed-by: Arun MURTHY <arun.murthy@stericsson.com> Reviewed-by: QATEST Reviewed-by: Srinidhi KASAGAR <srinidhi.kasagar@stericsson.com>
2012-05-22power: ab5500-charger: ab5500 usb charger driverArun Murthy
Adds a power supply class for usb, used to charge the battery. It includes enabling/disabling of usb charging and monitoring the usb. ST-Ericsson Linux next: Not Tested ST-Ericsson ID: WP256401 ST-Ericsson FOSS-OUT ID: Trivial Change-Id: I4fa42b3dbe82103ad49293b784243dc0edb61558 Signed-off-by: Arun Murthy <arun.murthy@stericsson.com> Reviewed-on: http://gerrit.lud.stericsson.com/gerrit/23149 Reviewed-by: QATEST Reviewed-by: Johan PALSSON <johan.palsson@stericsson.com> Reviewed-by: Srinidhi KASAGAR <srinidhi.kasagar@stericsson.com>
2012-05-22AB5500: AB5500 Analog to Digital conversion driverVijaya Kumar Kilari
AB5500 GPADC driver for battery/usb voltage, current and temperature measurement ST-Ericsson ID: WP332221 ST-Ericsson FOSS-OUT ID: Trivial Change-Id: Ia841694711cbba168e7e705a5a2bc78c6e3db8dc Signed-off-by: Vijaya Kumar Kilari <vijay.kilari@stericsson.com> Reviewed-on: http://gerrit.lud.stericsson.com/gerrit/21775 Reviewed-by: Arun MURTHY <arun.murthy@stericsson.com> Tested-by: Arun MURTHY <arun.murthy@stericsson.com> Reviewed-by: Johan PALSSON <johan.palsson@stericsson.com> Reviewed-by: QATEST Reviewed-by: Linus WALLEIJ <linus.walleij@stericsson.com> Fix to merge with 4e75305 "AB5500: AB5500 Analog to Digital conversion driver"
2012-05-22ab5500: leds: driver for ab5500 ledsPhilippe Langlais
Simple HV LED controller driver for AB5500v1.0 MFD chips ST-Ericsson ID: WP 332221 ST-Ericsson Linux next: ER 336280 ST-Ericsson FOSS-OUT ID: Trivial Change-Id: Ic787cd1a2277a4c5782dd18d3436cd95b763c81a Signed-off-by: Shreshtha Kumar Sahu <shreshthakumar.sahu@stericsson.com> Reviewed-on: http://gerrit.lud.stericsson.com/gerrit/21898 Reviewed-by: QATEST Reviewed-by: Srinidhi KASAGAR <srinidhi.kasagar@stericsson.com>
2012-05-22abx500: provide simpler function namesRabin Vincent
There are no non-interruptible versions of these functions, and all of them operate on registers, so provide shorter names to make subdrivers more readable while sticking to the 80-column line length limit. ST-Ericsson Linux next: - ST-Ericsson ID: WP257121 ST-Ericsson FOSS-OUT ID: Trivial Change-Id: I98dc8152e3e8064edb95ba5679277ed8c229b537 Signed-off-by: Rabin Vincent <rabin.vincent@stericsson.com> Reviewed-on: http://gerrit.lud.stericsson.com/gerrit/21816 Reviewed-by: QATEST Reviewed-by: Mattias WALLIN <mattias.wallin@stericsson.com>
2012-05-22abx500: big merge from GLK 2.6.35Philippe Langlais
Signed-off-by: Philippe Langlais <philippe.langlais@stericsson.com>
2012-05-22backlight/leds: add low threshold to pwm backlight/ledPhilippe Langlais
The intensity of the backlight/led can be varied from a range of max_brightness to zero. Though most, if not all the pwm based backlight/led devices start flickering at lower brightness value. And also for each device there exists a brightness value below which the backlight appears to be turned off though the value is not equal to zero. If the range of brightness for a device is from zero to max_brightness. A graph is plotted for brightness Vs intensity fo the pwm based backlight/led device has to be a linear graph. intensity | / | / | / |/ --------- 0 max_brightness But pratically on measuring the above we note that the intensity of backlight/led goes to zero(OFF) when the value in not zero almost nearing to zero(some x%). so the graph looks like intensity | / | / | / | | ------------ 0 x max_brightness In order to overcome this drawback knowing this x% i.e nothing but the low threshold beyond which the backlight/led is off and will have no effect, the brightness value is being offset by the low threshold value(retaining the linearity of the graph). Now the graph becomes intensity | / | / | / | / ------------- 0 max_brightness With this for each and every digit increment in the brightness from zero there is a change in the intensity of backlight/led. Devices having this behaviour can set the low threshold brightness(lth_brightness) and pass the same as platform data else can have it as zero. ST-Ericsson ID: Task168737 Change-Id: I7198ec89aa69e0c687d329b21f723fd8d5368928 Signed-off-by: Prajadevi H <prajadevi.h@stericsson.com> Signed-off-by: Arun Murthy <arun.murthy@stericsson.com> Acked-by: Linus Walleij <linus.walleij@stericsson.com> Reviewed-on: http://gerrit.lud.stericsson.com/gerrit/5231 Reviewed-by: Linus WALLEIJ <linus.walleij@stericsson.com>
2012-05-22mpcore_wdt: Stop watchdog of non-crashing coresPer Fransson
When kexec'ing to u-boot only the crashing core is used (and will have to be kicked by u-boot). The watchdog of other core has to be stopped before leaving linux. ST-Ericsson ID: - Change-Id: I329630fd8040f8af3e54fc51aa7187217938f0b8 Signed-off-by: Per Fransson <per.xx.fransson@stericsson.com> Reviewed-on: http://gerrit.lud.stericsson.com/gerrit/13678 Reviewed-by: QATOOLS Reviewed-by: Srinidhi KASAGAR <srinidhi.kasagar@stericsson.com> Reviewed-by: Jonas ABERG <jonas.aberg@stericsson.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2012-05-19Merge branch 'for-linus' of git://git.kernel.dk/linux-blockLinus Torvalds
Pull block layer fixes from Jens Axboe: "A few small, but important fixes. Most of them are marked for stable as well - Fix failure to release a semaphore on error path in mtip32xx. - Fix crashable condition in bio_get_nr_vecs(). - Don't mark end-of-disk buffers as mapped, limit it to i_size. - Fix for build problem with CONFIG_BLOCK=n on arm at least. - Fix for a buffer overlow on UUID partition printing. - Trivial removal of unused variables in dac960." * 'for-linus' of git://git.kernel.dk/linux-block: block: fix buffer overflow when printing partition UUIDs Fix blkdev.h build errors when BLOCK=n bio allocation failure due to bio_get_nr_vecs() block: don't mark buffers beyond end of disk as mapped mtip32xx: release the semaphore on an error path dac960: Remove unused variables from DAC960_CreateProcEntries()
2012-05-17Merge branches 'perf-urgent-for-linus', 'x86-urgent-for-linus' and ↵Linus Torvalds
'sched-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull perf, x86 and scheduler updates from Ingo Molnar. * 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: tracing: Do not enable function event with enable perf stat: handle ENXIO error for perf_event_open perf: Turn off compiler warnings for flex and bison generated files perf stat: Fix case where guest/host monitoring is not supported by kernel perf build-id: Fix filename size calculation * 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86, kvm: KVM paravirt kernels don't check for CPUID being unavailable x86: Fix section annotation of acpi_map_cpu2node() x86/microcode: Ensure that module is only loaded on supported Intel CPUs * 'sched-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: sched: Fix KVM and ia64 boot crash due to sched_groups circular linked list assumption
2012-05-16netfilter: ipset: fix hash size checking in kernelJozsef Kadlecsik
The hash size must fit both into u32 (jhash) and the max value of size_t. The missing checking could lead to kernel crash, bug reported by Seblu. Signed-off-by: Jozsef Kadlecsik <kadlec@blackhole.kfki.hu> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-05-15usbnet: fix skb traversing races during unlink(v2)Ming Lei
Commit 4231d47e6fe69f061f96c98c30eaf9fb4c14b96d(net/usbnet: avoid recursive locking in usbnet_stop()) fixes the recursive locking problem by releasing the skb queue lock before unlink, but may cause skb traversing races: - after URB is unlinked and the queue lock is released, the refered skb and skb->next may be moved to done queue, even be released - in skb_queue_walk_safe, the next skb is still obtained by next pointer of the last skb - so maybe trigger oops or other problems This patch extends the usage of entry->state to describe 'start_unlink' state, so always holding the queue(rx/tx) lock to change the state if the referd skb is in rx or tx queue because we need to know if the refered urb has been started unlinking in unlink_urbs. The other part of this patch is based on Huajun's patch: always traverse from head of the tx/rx queue to get skb which is to be unlinked but not been started unlinking. Signed-off-by: Huajun Li <huajun.li.lee@gmail.com> Signed-off-by: Ming Lei <tom.leiming@gmail.com> Cc: Oliver Neukum <oneukum@suse.de> Cc: stable@kernel.org Signed-off-by: David S. Miller <davem@davemloft.net>
2012-05-15block: fix buffer overflow when printing partition UUIDsTejun Heo
6d1d8050b4bc8 "block, partition: add partition_meta_info to hd_struct" added part_unpack_uuid() which assumes that the passed in buffer has enough space for sprintfing "%pU" - 37 characters including '\0'. Unfortunately, b5af921ec0233 "init: add support for root devices specified by partition UUID" supplied 33 bytes buffer to the function leading to the following panic with stackprotector enabled. Kernel panic - not syncing: stack-protector: Kernel stack corrupted in: ffffffff81b14c7e [<ffffffff815e226b>] panic+0xba/0x1c6 [<ffffffff81b14c7e>] ? printk_all_partitions+0x259/0x26xb [<ffffffff810566bb>] __stack_chk_fail+0x1b/0x20 [<ffffffff81b15c7e>] printk_all_paritions+0x259/0x26xb [<ffffffff81aedfe0>] mount_block_root+0x1bc/0x27f [<ffffffff81aee0fa>] mount_root+0x57/0x5b [<ffffffff81aee23b>] prepare_namespace+0x13d/0x176 [<ffffffff8107eec0>] ? release_tgcred.isra.4+0x330/0x30 [<ffffffff81aedd60>] kernel_init+0x155/0x15a [<ffffffff81087b97>] ? schedule_tail+0x27/0xb0 [<ffffffff815f4d24>] kernel_thread_helper+0x5/0x10 [<ffffffff81aedc0b>] ? start_kernel+0x3c5/0x3c5 [<ffffffff815f4d20>] ? gs_change+0x13/0x13 Increase the buffer size, remove the dangerous part_unpack_uuid() and use snprintf() directly from printk_all_partitions(). Signed-off-by: Tejun Heo <tj@kernel.org> Reported-by: Szymon Gruszczynski <sz.gruszczynski@googlemail.com> Cc: Will Drewry <wad@chromium.org> Cc: stable@vger.kernel.org Signed-off-by: Jens Axboe <axboe@kernel.dk>
2012-05-14Fix blkdev.h build errors when BLOCK=nRussell King
I see builds failing with: CC [M] drivers/mmc/host/dw_mmc.o In file included from drivers/mmc/host/dw_mmc.c:15: include/linux/blkdev.h:1404: warning: 'struct task_struct' declared inside parameter list include/linux/blkdev.h:1404: warning: its scope is only this definition or declaration, which is probably not what you want include/linux/blkdev.h:1408: warning: 'struct task_struct' declared inside parameter list include/linux/blkdev.h:1413: error: expected '=', ',', ';', 'asm' or '__attribute__' before 'blk_needs_flush_plug' make[4]: *** [drivers/mmc/host/dw_mmc.o] Error 1 This is because dw_mmc.c includes linux/blkdev.h as the very first file, and when CONFIG_BLOCK=n, blkdev.h omits all includes. As it requires linux/sched.h even when CONFIG_BLOCK=n, move this out of the #ifdef. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2012-05-12Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netLinus Torvalds
Pull networking fixes from David S. Miller: 1) Since we do RCU lookups on ipv4 FIB entries, we have to test if the entry is dead before returning it to our caller. 2) openvswitch locking and packet validation fixes from Ansis Atteka, Jesse Gross, and Pravin B Shelar. 3) Fix PM resume locking in IGB driver, from Benjamin Poirier. 4) Fix VLAN header handling in vhost-net and macvtap, from Basil Gor. 5) Revert a bogus network namespace isolation change that was causing regressions on S390 networking devices. 6) If bonding decides to process and handle a LACPDU frame, we shouldn't bump the rx_dropped counter. From Jiri Bohac. 7) Fix mis-calculation of available TX space in r8169 driver when doing TSO, which can lead to crashes and/or hung device. From Julien Ducourthial. 8) SCTP does not validate cached routes properly in all cases, from Nicolas Dichtel. 9) Link status interrupt needs to be handled in ks8851 driver, from Stephen Boyd. 10) Use capable(), not cap_raised(), in connector/userns netlink code. From Eric W. Biederman via Andrew Morton. 11) Fix pktgen OOPS on module unload, from Eric Dumazet. 12) iwlwifi under-estimates SKB truesizes, also from Eric Dumazet. 13) Cure division by zero in SFC driver, from Ben Hutchings. * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (26 commits) ks8851: Update link status during link change interrupt macvtap: restore vlan header on user read vhost-net: fix handle_rx buffer size bonding: don't increase rx_dropped after processing LACPDUs connector/userns: replace netlink uses of cap_raised() with capable() sctp: check cached dst before using it pktgen: fix crash at module unload Revert "net: maintain namespace isolation between vlan and real device" ehea: fix losing of NEQ events when one event occurred early igb: fix rtnl race in PM resume path ipv4: Do not use dead fib_info entries. r8169: fix unsigned int wraparound with TSO sfc: Fix division by zero when using one RX channel and no SR-IOV openvswitch: Validation of IPv6 set port action uses IPv4 header net: compare_ether_addr[_64bits]() has no ordering cdc_ether: Ignore bogus union descriptor for RNDIS devices bnx2x: bug fix when loading after SAN boot e1000: Silence sparse warnings by correcting type igb, ixgbe: netdev_tx_reset_queue incorrectly called from tx init path openvswitch: Release rtnl_lock if ovs_vport_cmd_build_info() failed. ...
2012-05-11block: don't mark buffers beyond end of disk as mappedJeff Moyer
Hi, We have a bug report open where a squashfs image mounted on ppc64 would exhibit errors due to trying to read beyond the end of the disk. It can easily be reproduced by doing the following: [root@ibm-p750e-02-lp3 ~]# ls -l install.img -rw-r--r-- 1 root root 142032896 Apr 30 16:46 install.img [root@ibm-p750e-02-lp3 ~]# mount -o loop ./install.img /mnt/test [root@ibm-p750e-02-lp3 ~]# dd if=/dev/loop0 of=/dev/null dd: reading `/dev/loop0': Input/output error 277376+0 records in 277376+0 records out 142016512 bytes (142 MB) copied, 0.9465 s, 150 MB/s In dmesg, you'll find the following: squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 43.106012] attempt to access beyond end of device [ 43.106029] loop0: rw=0, want=277410, limit=277408 [ 43.106039] Buffer I/O error on device loop0, logical block 138704 [ 43.106053] attempt to access beyond end of device [ 43.106057] loop0: rw=0, want=277412, limit=277408 [ 43.106061] Buffer I/O error on device loop0, logical block 138705 [ 43.106066] attempt to access beyond end of device [ 43.106070] loop0: rw=0, want=277414, limit=277408 [ 43.106073] Buffer I/O error on device loop0, logical block 138706 [ 43.106078] attempt to access beyond end of device [ 43.106081] loop0: rw=0, want=277416, limit=277408 [ 43.106085] Buffer I/O error on device loop0, logical block 138707 [ 43.106089] attempt to access beyond end of device [ 43.106093] loop0: rw=0, want=277418, limit=277408 [ 43.106096] Buffer I/O error on device loop0, logical block 138708 [ 43.106101] attempt to access beyond end of device [ 43.106104] loop0: rw=0, want=277420, limit=277408 [ 43.106108] Buffer I/O error on device loop0, logical block 138709 [ 43.106112] attempt to access beyond end of device [ 43.106116] loop0: rw=0, want=277422, limit=277408 [ 43.106120] Buffer I/O error on device loop0, logical block 138710 [ 43.106124] attempt to access beyond end of device [ 43.106128] loop0: rw=0, want=277424, limit=277408 [ 43.106131] Buffer I/O error on device loop0, logical block 138711 [ 43.106135] attempt to access beyond end of device [ 43.106139] loop0: rw=0, want=277426, limit=277408 [ 43.106143] Buffer I/O error on device loop0, logical block 138712 [ 43.106147] attempt to access beyond end of device [ 43.106151] loop0: rw=0, want=277428, limit=277408 [ 43.106154] Buffer I/O error on device loop0, logical block 138713 [ 43.106158] attempt to access beyond end of device [ 43.106162] loop0: rw=0, want=277430, limit=277408 [ 43.106166] attempt to access beyond end of device [ 43.106169] loop0: rw=0, want=277432, limit=277408 ... [ 43.106307] attempt to access beyond end of device [ 43.106311] loop0: rw=0, want=277470, limit=2774 Squashfs manages to read in the end block(s) of the disk during the mount operation. Then, when dd reads the block device, it leads to block_read_full_page being called with buffers that are beyond end of disk, but are marked as mapped. Thus, it would end up submitting read I/O against them, resulting in the errors mentioned above. I fixed the problem by modifying init_page_buffers to only set the buffer mapped if it fell inside of i_size. Cheers, Jeff Signed-off-by: Jeff Moyer <jmoyer@redhat.com> Acked-by: Nick Piggin <npiggin@kernel.dk> -- Changes from v1->v2: re-used max_block, as suggested by Nick Piggin. Signed-off-by: Jens Axboe <axboe@kernel.dk>
2012-05-10Revert "net: maintain namespace isolation between vlan and real device"David S. Miller
This reverts commit 8a83a00b0735190384a348156837918271034144. It causes regressions for S390 devices, because it does an unconditional DST drop on SKBs for vlans and the QETH device needs the neighbour entry hung off the DST for certain things on transmit. Arnd can't remember exactly why he even needed this change. Conflicts: drivers/net/macvlan.c net/8021q/vlan_dev.c net/core/dev.c Signed-off-by: David S. Miller <davem@davemloft.net>
2012-05-10tracing: Do not enable function event with enableSteven Rostedt
With the adding of function tracing event to perf, it caused a side effect that produces the following warning when enabling all events in ftrace: # echo 1 > /sys/kernel/debug/tracing/events/enable [console] event trace: Could not enable event function This is because when enabling all events via the debugfs system it ignores events that do not have a ->reg() function assigned. This was to skip over the ftrace internal events (as they are not TRACE_EVENTs). But as the ftrace function event now has a ->reg() function attached to it for use with perf, it is no longer ignored. Worse yet, this ->reg() function is being called when it should not be. It returns an error and causes the above warning to be printed. By adding a new event_call flag (TRACE_EVENT_FL_IGNORE_ENABLE) and have all ftrace internel event structures have it set, setting the events/enable will no longe try to incorrectly enable the function event and does not warn. Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
generated by cgit v1.2.3 (git 2.39.1) at 2025-07-03 17:21:39 +0000