summaryrefslogtreecommitdiff
path: root/include
AgeCommit message (Collapse)Author
2010-10-06cfg80211/mac80211: allow per-station GTKsJohannes Berg
This adds API to allow adding per-station GTKs, updates mac80211 to support it, and also allows drivers to remove a key from hwaccel again when this may be necessary due to multiple GTKs. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-10-05Merge branch 'wireless-next' of ↵John W. Linville
git://git.kernel.org/pub/scm/linux/kernel/git/luca/wl12xx
2010-10-05nl80211: fix remain-on-channel documentationJohannes Berg
The documentation for NL80211_CMD_REMAIN_ON_CHANNEL isn't accurate, an interface index is required by the command. Update it accordingly. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-10-05genetlink: introduce pre_doit/post_doit hooksJohannes Berg
Each family may have some amount of boilerplate locking code that applies to most, or even all, commands. This allows a family to handle such things in a more generic way, by allowing it to a) include private flags in each operation b) specify a pre_doit hook that is called, before an operation's doit() callback and may return an error directly, c) specify a post_doit hook that can undo locking or similar things done by pre_doit, and finally d) include two private pointers in each info struct passed between all these operations including doit(). (It's two because I'll need two in nl80211 -- can be extended.) Signed-off-by: Johannes Berg <johannes.berg@intel.com> Acked-by: David S. Miller <davem@davemloft.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-10-05mac80211: distinct between max rates and the number of rates the hw can reportHelmut Schaa
Some drivers cannot handle multiple retry rates specified by the rc algorithm but instead use their own retry table (for example rt2800). However, if such a device registers itself with a max_rates value of 1 the rc algorithm cannot make use of the extended information the device can provide about retried rates. On the other hand, if a device registers itself with a max_rates value > 1 the rc algorithm assumes that the device can handle multi rate retries. Fix this issue by introducing another hw parameter max_report_rates that can be set to a different value then max_rates to indicate if a device is capable of reporting more rates then specified in max_rates. Signed-off-by: Helmut Schaa <helmut.schaa@googlemail.com> Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-10-05cfg80211: patches to allow setting the WDS peerBill Jordan
Added a nl interface to set the peer bssid of a WDS interface. Signed-off-by: Bill Jordan <bjordan@rajant.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-10-05cfg80211: remove spurious __KERNEL__ ifdefJohannes Berg
The net/cfg80211.h header file isn't exported to userspace, so there's no need for any kind of __KERNEL__ protection in it. If it was exported, everything else in it would need protection as well, not just the logging stuff ... Cc:Joe Perches <joe@perches.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-10-05nl80211: allow drivers to indicate whether the survey data channel is in useFelix Fietkau
Some user space applications only want to display survey data for the operating channel, however there is no API to get that yet. Signed-off-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-09-30wl12xx: fix non-wl12xx build scenariosOhad Ben-Cohen
Support building wl1271-equipped boards without building the wl1271 driver itself, e.g.: CONFIG_MACH_OMAP_ZOOM3=y CONFIG_WL12XX is not set Reported-by: John W. Linville <linville@tuxdriver.com> Signed-off-by: Ohad Ben-Cohen <ohad@wizery.com> Signed-off-by: Luciano Coelho <luciano.coelho@nokia.com>
2010-09-27mac80211: move packet flags into packetJohannes Berg
commit 8c0c709eea5cbab97fb464cd68b06f24acc58ee1 Author: Johannes Berg <johannes@sipsolutions.net> Date: Wed Nov 25 17:46:15 2009 +0100 mac80211: move cmntr flag out of rx flags moved the CMNTR flag into the skb RX flags for some aggregation cleanups, but this was wrong since the optimisation this flag tried to make requires that it is kept across the processing of multiple interfaces -- which isn't true for flags in the skb. The patch not only broke the optimisation, it also introduced a bug: under some (common!) circumstances the flag will be set on an already freed skb! However, investigating this in more detail, I found that most of the flags that we set should be per packet, _except_ for this one, due to a-MPDU processing. Additionally, the flags used for processing (currently just this one) need to be reset before processing a new packet. Since we haven't actually seen bugs reported as a result of the wrong flags handling (which is not too surprising -- the only real bug case I can come up with is an a-MSDU contained in an a-MPDU), I'll make a different fix for rc. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-09-27mac80211/ath9k: Support AMPDU with multiple VIFs.Ben Greear
The old ieee80211_find_sta_by_hw method didn't properly find VIFS when there was more than one per AP. This caused AMPDU logic in ath9k to get the wrong VIF when trying to account for transmitted SKBs. This patch changes ieee80211_find_sta_by_hw to take a localaddr argument to distinguish between VIFs with the same AP but different local addresses. The method name is changed to ieee80211_find_sta_by_ifaddr. Signed-off-by: Ben Greear <greearb@candelatech.com> Acked-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-09-24mac80211: clear txflags for ps-filtered framesChristian Lamparter
This patch fixes stale mac80211_tx_control_flags for filtered / retried frames. Because ieee80211_handle_filtered_frame feeds skbs back into the tx path, they have to be stripped of some tx flags so they won't confuse the stack, driver or device. Cc: <stable@kernel.org> Acked-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: Christian Lamparter <chunkeey@googlemail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-09-21wl1271: make ref_clock configurable by boardOhad Ben-Cohen
The wl1271 device is using a reference clock that may change between board to board. Make the ref_clock parameter configurable by board settings instead of having a hard coded value in the sources. Signed-off-by: Ohad Ben-Cohen <ohad@wizery.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-09-21wl12xx: add platform data passing supportOhad Ben-Cohen
Add a simple mechanism to pass platform data to the SDIO instances of wl12xx. This way there is no confusion over who owns the 'embedded data', typechecking is preserved, and no possibility for the wrong driver to pick up the data. Originally proposed by Russell King. Signed-off-by: Ohad Ben-Cohen <ohad@wizery.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-09-21wl12xx: make wl12xx.h common to both spi and sdioOhad Ben-Cohen
Move wl12xx.h outside of the spi-specific location, so it can be shared with both spi and sdio solutions. Update all users of spi/wl12xx.h accordingly Signed-off-by: Ohad Ben-Cohen <ohad@wizery.com> Acked-by: Luciano Coelho <luciano.coelho@nokia.com> Acked-by: Tony Lindgren <tony@atomide.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-09-16mac80211: add p2p device type supportJohannes Berg
When a driver advertises p2p device support, mac80211 will handle it, but internally it will rewrite the interface type to STA/AP rather than P2P-STA/GO since otherwise a lot of paths need to be touched that are otherwise identical. A p2p boolean tells drivers whether or not a given interface will be used for p2p or not. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-09-16cfg80211/nl80211: introduce p2p device typesJohannes Berg
This adds P2P-STA and P2P-GO as device types so we can distinguish between those and normal STA or AP (respectively) type interfaces. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-09-16include/net/cfg80211.h: wiphy_<level> messages use dev_printkJoe Perches
The output becomes: [ 41.261941] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht' Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-09-14mac80211: add a note about iterating interfaces during add_interface()Felix Fietkau
Signed-off-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-08-27mac80211: support runtime interface type changesJohannes Berg
Add support to mac80211 for changing the interface type even when the interface is UP, if the driver supports it. To achieve this * add a new driver callback for switching, * split some of the interface up/down code out into new functions (do_open/do_stop), and * maintain an own __SDATA_RUNNING bit that will not be set during interface type, so that any other code doesn't use the interface. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-08-27cfg80211: allow changing port control protocolJohannes Berg
Some vendor specified mechanisms for 802.1X-style functionality use a different protocol than EAP (even if EAP is vendor-extensible). Allow setting the ethertype for the protocol when a driver has support for this. The default if unspecified is EAP, of course. Note: This is suitable only for station mode, not for AP implementation. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Juuso Oikarinen <juuso.oikarinen@nokia.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-08-27mac80211: allow scan to complete from any contextJohannes Berg
The ieee80211_scan_completed() function was a frequent source of potential deadlocks, since it is called by drivers but may call back into drivers, so drivers had to make sure to call it without any locks held, which frequently lead to more complex code in drivers. Avoid that problem by allowing the function to be called in any context, and queueing the actual work it does. Also update the documentation for it to indicate this. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-08-25wl12xx: change contact person for the include fileKalle Valo
Luciano should be the contact person for the include/linux/spi/wl12xx.h file. Signed-off-by: Kalle Valo <kvalo@adurom.com> Acked-by: Luciano Coelho <luciano.coelho@nokia.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-08-25mac80211: trivial spelling fixesBob Copeland
Fix spelling and readability of a few lines of kernel doc: s/issueing/issuing/g s/approriate/appropriate/g s/supported by simply/supported simply by/ s/IEEE80211_HW_BEACON_FILTERING/IEEE80211_HW_BEACON_FILTER/g Signed-off-by: Bob Copeland <me@bobcopeland.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-08-24cfg80211: add some documentationJohannes Berg
Add some documentation for cfg80211. I'm hoping some of the regulatory documentation will be filled by somebody more familiar with it, hint hint! :) Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-08-24nl80211: some documentation fixesJohannes Berg
The nl80211 documentation is currently never generated, so problems have accumulated. Fix most of the trivial ones. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-08-24mac80211: fix docbookJohannes Berg
Fix a small problem in the documentation for ieee80211_request_smps, and a now erroneous inclusion of enum ieee80211_key_alg, which no longer exists after the change to ciphers. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-08-24b43: N-PHY: Implement MAC PHY clock setGábor Stefanik
Signed-off-by: Gábor Stefanik <netrolller.3d@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-08-24cfg80211/mac80211: extensible frame processingJohannes Berg
Allow userspace to register for more than just action frames by giving the frame subtype, and make it possible to use this in various modes as well. With some tweaks and some added functionality this will, in the future, also be usable in AP mode and be able to replace the cooked monitor interface currently used in that case. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-08-24cfg80211: mark ieee80211_hdrlen constJohannes Berg
This function analyses only its single, value-passed argument, and has no side effects. Thus it can be const, which makes mac80211 smaller, for example: text data bss dec hex filename 362518 16720 884 380122 5ccda mac80211.ko (before) 362358 16720 884 379962 5cc3a mac80211.ko (after) a 160 byte saving in text size, and an optimisation because the function won't be called as often. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-08-16mac80211: use cipher suite selectorsJohannes Berg
Currently, mac80211 translates the cfg80211 cipher suite selectors into ALG_* values. That isn't all too useful, and some drivers benefit from the distinction between WEP40 and WEP104 as well. Therefore, convert it all to use the cipher suite selectors. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Acked-by: Gertjan van Wingerde <gwingerde@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-08-16cfg80211: support sysfs namespacesJohannes Berg
Enable using network namespaces with wireless devices even when sysfs is enabled using the same infrastructure that was built for netdevs. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Acked-by: "Eric W. Biederman" <ebiederm@xmission.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-08-16mac80211: allow drivers to request SM PS mode changeJohannes Berg
Sometimes drivers have more information than the stack about how their antennas/chains are used, and may require that the SM PS mode be changed. This could happen, for example, when detecting that the user disconnected an antenna. Thus this patch introduces API to allow drivers to request SM PS mode changes. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-08-16mac80211: per interface idle notificationJohannes Berg
Sometimes we don't just need to know whether or not the device is idle, but also per interface. This adds that reporting capability to mac80211. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-08-16Merge branch 'master' of ↵John W. Linville
git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-2.6
2010-08-16mac80211: support use of NAPI for bottom-half processingJohn W. Linville
This patch implement basic infrastructure to support use of NAPI by mac80211-based hardware drivers. Because mac80211 devices can support multiple netdevs, a dummy netdev is used for interfacing with the NAPI code in the core of the network stack. That structure is hidden from the hardware drivers, but the actual napi_struct is exposed in the ieee80211_hw structure so that the poll routines in drivers can retrieve that structure. Hardware drivers can also specify their own weight value for NAPI polling. Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-08-10Bluetooth: Use 3-DH5 payload size for default ERTM max PDU sizeMat Martineau
The previous value of 672 for L2CAP_DEFAULT_MAX_PDU_SIZE is based on the default L2CAP MTU. That default MTU is calculated from the size of two DH5 packets, minus ACL and L2CAP b-frame header overhead. ERTM is used with newer basebands that typically support larger 3-DH5 packets, and i-frames and s-frames have more header overhead. With clean RF conditions, basebands will typically attempt to use 1021-byte 3-DH5 packets for maximum throughput. Adjusting for 2 bytes of ACL headers plus 10 bytes of worst-case L2CAP headers yields 1009 bytes of payload. This PDU size imposes less overhead for header bytes and gives the baseband the option to choose 3-DH5 packets, but is small enough for ERTM traffic to interleave well with other L2CAP or SCO data. 672-byte payloads do not allow the most efficient over-the-air packet choice, and cannot achieve maximum throughput over BR/EDR. Signed-off-by: Mat Martineau <mathewm@codeaurora.org> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2010-08-10Bluetooth: Change default L2CAP ERTM retransmit timeoutMat Martineau
The L2CAP specification requires that the ERTM retransmit timeout be at least 2 seconds for BR/EDR connections. Signed-off-by: Mat Martineau <mathewm@codeaurora.org> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2010-08-06Merge branch 'master' of ↵David S. Miller
git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-2.6
2010-08-05Merge branch 'master' of ↵John W. Linville
git://git.kernel.org/pub/scm/linux/kernel/git/holtmann/bluetooth-next-2.6
2010-08-04ppp: make channel_ops conststephen hemminger
The PPP channel ops structure should be const. Cleanup the declarations to use standard C99 format. Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-08-04sk_buff: introduce pskb_network_may_pull()Changli Gao
Signed-off-by: Changli Gao <xiaosuo@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-08-04Merge branch 'for-next' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial * 'for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial: (48 commits) Documentation: update broken web addresses. fix comment typo "choosed" -> "chosen" hostap:hostap_hw.c Fix typo in comment Fix spelling contorller -> controller in comments Kconfig.debug: FAIL_IO_TIMEOUT: typo Faul -> Fault fs/Kconfig: Fix typo Userpace -> Userspace Removing dead MACH_U300_BS26 drivers/infiniband: Remove unnecessary casts of private_data fs/ocfs2: Remove unnecessary casts of private_data libfc: use ARRAY_SIZE scsi: bfa: use ARRAY_SIZE drm: i915: use ARRAY_SIZE drm: drm_edid: use ARRAY_SIZE synclink: use ARRAY_SIZE block: cciss: use ARRAY_SIZE comment typo fixes: charater => character fix comment typos concerning "challenge" arm: plat-spear: fix typo in kerneldoc reiserfs: typo comment fix update email address ...
2010-08-04Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/jikos/hid * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/hid: (30 commits) Revert "HID: add support for the Wacom Intuos 4 wireless" HID: fix up Kconfig entry for ACRUX driver HID: add ACRUX game controller force feedback support HID: Force input registration for "VEC footpedal" HID: add HID_QUIRK_HIDINPUT_FORCE HID: hid-input.c: indentation fixes HID: hiddev: use usb_find_interface, get rid of BKL HID: ignore digitizer usage Undefined (0x00) HID: Add support for Conceptronic CLLRCMCE HID: hid-ids.h: Whitespace fixup, align using TABs HID: picolcd: implement refcounting of framebuffer HID: picolcd: do not reallocate memory on depth change HID: picolcd: Add minimal palette required by fbcon on 8bpp HID: magicmouse: Correct parsing of large X and Y motions. HID: magicmouse: report last touch up HID: picolcd: fix deferred_io init/cleanup to fb ordering HID: hid-ids.h: keep vendor ids in alphabetical order HID: add proper support for Elecom BM084 bluetooth mouse HID: magicmouse: enable horizontal scrolling HID: magicmouse: add param for scroll speed ...
2010-08-04Merge git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6Linus Torvalds
* git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6: (39 commits) random: Reorder struct entropy_store to remove padding on 64bits padata: update API documentation padata: Remove padata_get_cpumask crypto: pcrypt - Update pcrypt cpumask according to the padata cpumask notifier crypto: pcrypt - Rename pcrypt_instance padata: Pass the padata cpumasks to the cpumask_change_notifier chain padata: Rearrange set_cpumask functions padata: Rename padata_alloc functions crypto: pcrypt - Dont calulate a callback cpu on empty callback cpumask padata: Check for valid cpumasks padata: Allocate cpumask dependend recources in any case padata: Fix cpu index counting crypto: geode_aes - Convert pci_table entries to PCI_VDEVICE (if PCI_ANY_ID is used) pcrypt: Added sysfs interface to pcrypt padata: Added sysfs primitives to padata subsystem padata: Make two separate cpumasks padata: update documentation padata: simplify serialization mechanism padata: make padata_do_parallel to return zero on success padata: Handle empty padata cpumasks ...
2010-08-04Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tj/percpu * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/percpu: percpu: allow limited allocation before slab is online percpu: make @dyn_size always mean min dyn_size in first chunk init functions
2010-08-04Merge git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi-misc-2.6Linus Torvalds
* git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi-misc-2.6: (276 commits) [SCSI] zfcp: Trigger logging in the FCP channel on qdio error conditions [SCSI] zfcp: Introduce experimental support for DIF/DIX [SCSI] zfcp: Enable data division support for FCP devices [SCSI] zfcp: Prevent access on uninitialized memory. [SCSI] zfcp: Post events through FC transport class [SCSI] zfcp: Cleanup QDIO attachment and improve processing. [SCSI] zfcp: Cleanup function parameters for sbal value. [SCSI] zfcp: Use correct width for timer_interval field [SCSI] zfcp: Remove SCSI device when removing unit [SCSI] zfcp: Use memdup_user and kstrdup [SCSI] zfcp: Fix retry after failed "open port" erp action [SCSI] zfcp: Fail erp after timeout [SCSI] zfcp: Use forced_reopen in terminate_rport_io callback [SCSI] zfcp: Register SCSI devices after successful fc_remote_port_add [SCSI] zfcp: Do not try "forced close" when port is already closed [SCSI] zfcp: Do not unblock rport from REOPEN_PORT_FORCED [SCSI] sd: add support for runtime PM [SCSI] implement runtime Power Management [SCSI] convert to the new PM framework [SCSI] Unify SAM_ and SAM_STAT_ macros ...
2010-08-04Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next-2.6Linus Torvalds
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next-2.6: (1443 commits) phy/marvell: add 88ec048 support igb: Program MDICNFG register prior to PHY init e1000e: correct MAC-PHY interconnect register offset for 82579 hso: Add new product ID can: Add driver for esd CAN-USB/2 device l2tp: fix export of header file for userspace can-raw: Fix skb_orphan_try handling Revert "net: remove zap_completion_queue" net: cleanup inclusion phy/marvell: add 88e1121 interface mode support u32: negative offset fix net: Fix a typo from "dev" to "ndev" igb: Use irq_synchronize per vector when using MSI-X ixgbevf: fix null pointer dereference due to filter being set for VLAN 0 e1000e: Fix irq_synchronize in MSI-X case e1000e: register pm_qos request on hardware activation ip_fragment: fix subtracting PPPOE_SES_HLEN from mtu twice net: Add getsockopt support for TCP thin-streams cxgb4: update driver version cxgb4: add new PCI IDs ... Manually fix up conflicts in: - drivers/net/e1000e/netdev.c: due to pm_qos registration infrastructure changes - drivers/net/phy/marvell.c: conflict between adding 88ec048 support and cleaning up the IDs - drivers/net/wireless/ipw2x00/ipw2100.c: trivial ipw2100_pm_qos_req conflict (registration change vs marking it static)
2010-08-04Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/konrad/ibft-2.6 * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/konrad/ibft-2.6: ibft: Use IBFT_SIGN instead of open-coding the search string. ibft: convert iscsi_ibft module to iscsi boot lib ibft: separate ibft parsing from sysfs interface ibft: For UEFI machines actually do scan ACPI for iBFT. ibft: Update iBFT handling for v1.03 of the spec.
2010-08-04Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/suspend-2.6 * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/suspend-2.6: PM / Runtime: Add runtime PM statistics (v3) PM / Runtime: Make runtime_status attribute not debug-only (v. 2) PM: Do not use dynamically allocated objects in pm_wakeup_event() PM / Suspend: Fix ordering of calls in suspend error paths PM / Hibernate: Fix snapshot error code path PM / Hibernate: Fix hibernation_platform_enter() pm_qos: Get rid of the allocation in pm_qos_add_request() pm_qos: Reimplement using plists plist: Add plist_last PM: Make it possible to avoid races between wakeup and system sleep PNPACPI: Add support for remote wakeup PM: describe kernel policy regarding wakeup defaults (v. 2) PM / Hibernate: Fix typos in comments in kernel/power/swap.c
generated by cgit v1.2.3 (git 2.39.1) at 2024-07-02 06:15:03 +0000