summaryrefslogtreecommitdiff
path: root/include
AgeCommit message (Collapse)Author
2012-03-12cfg80211: Add background scan period attribute.Bala Shanmugam
Receive background scan period as part of connect command and pass the same to the driver. Signed-off-by: Bala Shanmugam <bkamatch@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-03-08mac80211: update ieee80211_tx_rate_control kerneldocSimon Wunderlich
* add entry for rate_idx_mcs_mask * fix order of entries to represent the structs' order Signed-off-by: Simon Wunderlich <siwu@hrz.tu-chemnitz.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-03-06NFC: NCI code identation fixesSamuel Ortiz
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-03-06NFC: Core code identation fixesSamuel Ortiz
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-03-06NFC: Remove the rf mode parameter from the DEP link up routineSamuel Ortiz
When calling nfc_dep_link_up, we implicitely are in initiator mode. Which means we also can provide the general bytes as a function argument, as all drivers will eventually request them. Signed-off-by: Samuel Ortiz <sameo@linux.intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-03-06NFC: Add device powered netlink attributeSamuel Ortiz
For user space to know if a device is up or down. Signed-off-by: Samuel Ortiz <sameo@linux.intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-03-06bcma: add support for on-chip OTP memory used for SPROM storageArend van Spriel
Wireless Broadcom chips can have either their SPROM data stored on either external SPROM or on-chip OTP memory. Both are accessed through the same register space. This patch adds support for the on-chip OTP memory. Tested with: BCM43224 OTP and SPROM BCM4331 SPROM BCM4313 OTP This patch is in response to linux-wireless thread [1]. [1] http://article.gmane.org/gmane.linux.kernel.wireless.general/85426 Tested-by: Saul St. John <saul.stjohn@gmail.com> Tested-by: Rafal Milecki <zajec5@gmail.com> Tested-by: Hauke Mehrtens <hauke@hauke-m.de> Cc: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: Arend van Spriel <arend@broadcom.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-03-06cfg80211: expose cfg80211_calculate_bitrate()Thomas Pedersen
Signed-off-by: Thomas Pedersen <thomas@cozybit.com> Reviewed-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-03-06cfg80211/mac80211: report signal strength for mgmt framesJohannes Berg
Add the signal strength (in dBm only for now) to frames that are received via nl80211's various frame APIs. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Acked-by: Kalle Valo <kvalo@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-03-05cfg80211: Add an attribute to set inactivity timeout in AP modeVasanthakumar Thiagarajan
This patch adds an attribute, NL80211_ATTR_INACTIVITY_TIMEOUT, to set the inactivity timeout which can be used to remove the station in AP mode. This can be passed in NL80211_CMD_START_AP and used by the drivers which have AP MLME in firmware but don't support get_station() properly. To disable inactivity timer in userspace, wpa_s for example, there is a new flag, NL80211_FEATURE_INACTIVITY_TIMER, in nl80211_feature_flags through which drivers can register their capability to use the inactivity timeout to free the stations. Signed-off-by: Vasanthakumar Thiagarajan <vthiagar@qca.qualcomm.com> Acked-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-03-05mac80211: add an rx flag for ignoring a packet's signal strengthFelix Fietkau
For A-MPDU rx it makes sense to only process the signal strength once per aggregate instead of once per subframe. Additonally, some hardware (e.g. Atheros) only provides valid signal strength information for the last subframe. Signed-off-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-03-05cfg80211: fix kernel-docJohannes Berg
I forgot to update the kernel-doc in my patch to redesign AP mode APIs, fix that now. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-03-05{nl,cfg,mac}80211: Implement RSSI threshold for mesh peeringAshok Nagarajan
Mesh peer links are established only if average rssi of the peer candidate satisfies the threshold. This is not in 802.11s specification but was requested by David Fulgham, an open80211s user. This is a way to avoid marginal peer links with stations that are barely within range. This patch adds a new mesh configuration parameter, mesh_rssi_threshold. This feature is supported only for hardwares that report signal in dBm. Signed-off-by: Ashok Nagarajan <ashok@cozybit.com> Signed-off-by: Javier Cardona <javier@cozybit.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-03-05bcma: add support for sprom not found on the deviceHauke Mehrtens
On SoCs the sprom is stored in the nvram in a special partition on the flash chip. The nvram contains the sprom for the main bus, but sometimes also for a pci devices using bcma. This patch makes it possible for the arch code to register a function to fetch the needed sprom from the nvram and provide it to the bcma code. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-03-05bcma: export bcma_find_coreHauke Mehrtens
This function is needed by the bcm47xx arch code to get the number of the ieee80211 core. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-03-05ssb: add some missing sprom attributesHauke Mehrtens
This patch extends the sprom struct to contain all sprom attributes found in sprom version 1 to 9. This was done accordingly to the open source part of the Broadcom SDK. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-03-05ssb: add alpha2Hauke Mehrtens
This member contains the country code encoded with two chars Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-03-05ssb: fix per path sprom varsHauke Mehrtens
On sprom version 4 and 5 there are 4 values for pa_2g, pa_5gl, pa_5g and pa_5gh, for sprom version 8 and 9 there are only 3. Make the per path sprom store also work for older sprom versions. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-03-05ssb: remove 5GHz antenna gain from spromHauke Mehrtens
There is no 2.4 GHz or 5GHz antenna gain stored in sprom. The sprom just stores the gain values for antenna 1 and 2 or 1 to 4 for more recent sprom versions. On old devices antenna 2 was used for 5 GHz wifi. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-03-05ssb: sprom fix some sizes / signednessHauke Mehrtens
Some parts of the sprom struct are bigger than needed. The leddc and maxpwr values are just 8 bit long and not 16. rxpo2g and rxpo5g are signed I got these information for the open source part of the Broadcom SDK covering sprom version 1 to 9. rxpo2g contained a negative number on my bcm5354 based device, this cased an error and Broadcom SDK says this is signed. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-02-29mac80211: handle non-bufferable MMPDUs correctlyJohannes Berg
This renames the IEEE80211_TX_CTL_POLL_RESPONSE TX flag to IEEE80211_TX_CTL_NO_PS_BUFFER and also uses it for non-bufferable MMPDUs (all MMPDUs but deauth, disassoc and action frames.) Previously, mac80211 would let the MMPDU through but not set the flag so drivers supporting some hardware aids for avoiding the PS races would then reject the frame. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-02-29cfg80211: remove cookies from callbacksJohannes Berg
In "cfg80211: no cookies in cfg80211_send_XXX()" Holger Schurig removed the cookies in the calls from mac80211 to cfg80211, but the ones in the other direction were left in. Remove them now. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-02-22cfg80211: restructure AP/GO mode APIJohannes Berg
The AP/GO mode API isn't very clearly defined, it has "set beacon" and "new beacon" etc. Modify the API to the following: * start AP -- all settings * change beacon -- new beacon data * stop AP -- stop AP mode operation This also reflects in the nl80211 API, rename the commands there correspondingly (but keep the old names for compatibility.) Overall, this makes it much clearer what's going on in the API. Kalle developed the ath6kl changes, I created the rest of the patch. Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-02-15Merge branch 'master' of ↵John W. Linville
git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless Conflicts: net/mac80211/debugfs_sta.c net/mac80211/sta_info.h
2012-02-15Bluetooth: Remove usage of __cancel_delayed_work()Ulisses Furquim
__cancel_delayed_work() is being used in some paths where we cannot sleep waiting for the delayed work to finish. However, that function might return while the timer is running and the work will be queued again. Replace the calls with safer cancel_delayed_work() version which spins until the timer handler finishes on other CPUs and cancels the delayed work. Signed-off-by: Ulisses Furquim <ulisses@profusion.mobi> Acked-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
2012-02-15Bluetooth: Fix potential deadlockAndre Guedes
We don't need to use the _sync variant in hci_conn_hold and hci_conn_put to cancel conn->disc_work delayed work. This way we avoid potential deadlocks like this one reported by lockdep. ====================================================== [ INFO: possible circular locking dependency detected ] 3.2.0+ #1 Not tainted ------------------------------------------------------- kworker/u:1/17 is trying to acquire lock: (&hdev->lock){+.+.+.}, at: [<ffffffffa0041155>] hci_conn_timeout+0x62/0x158 [bluetooth] but task is already holding lock: ((&(&conn->disc_work)->work)){+.+...}, at: [<ffffffff81035751>] process_one_work+0x11a/0x2bf which lock already depends on the new lock. the existing dependency chain (in reverse order) is: -> #2 ((&(&conn->disc_work)->work)){+.+...}: [<ffffffff81057444>] lock_acquire+0x8a/0xa7 [<ffffffff81034ed1>] wait_on_work+0x3d/0xaa [<ffffffff81035b54>] __cancel_work_timer+0xac/0xef [<ffffffff81035ba4>] cancel_delayed_work_sync+0xd/0xf [<ffffffffa00554b0>] smp_chan_create+0xde/0xe6 [bluetooth] [<ffffffffa0056160>] smp_conn_security+0xa3/0x12d [bluetooth] [<ffffffffa0053640>] l2cap_connect_cfm+0x237/0x2e8 [bluetooth] [<ffffffffa004239c>] hci_proto_connect_cfm+0x2d/0x6f [bluetooth] [<ffffffffa0046ea5>] hci_event_packet+0x29d1/0x2d60 [bluetooth] [<ffffffffa003dde3>] hci_rx_work+0xd0/0x2e1 [bluetooth] [<ffffffff810357af>] process_one_work+0x178/0x2bf [<ffffffff81036178>] worker_thread+0xce/0x152 [<ffffffff81039a03>] kthread+0x95/0x9d [<ffffffff812e7754>] kernel_thread_helper+0x4/0x10 -> #1 (slock-AF_BLUETOOTH-BTPROTO_L2CAP){+.+...}: [<ffffffff81057444>] lock_acquire+0x8a/0xa7 [<ffffffff812e553a>] _raw_spin_lock_bh+0x36/0x6a [<ffffffff81244d56>] lock_sock_nested+0x24/0x7f [<ffffffffa004d96f>] lock_sock+0xb/0xd [bluetooth] [<ffffffffa0052906>] l2cap_chan_connect+0xa9/0x26f [bluetooth] [<ffffffffa00545f8>] l2cap_sock_connect+0xb3/0xff [bluetooth] [<ffffffff81243b48>] sys_connect+0x69/0x8a [<ffffffff812e6579>] system_call_fastpath+0x16/0x1b -> #0 (&hdev->lock){+.+.+.}: [<ffffffff81056d06>] __lock_acquire+0xa80/0xd74 [<ffffffff81057444>] lock_acquire+0x8a/0xa7 [<ffffffff812e3870>] __mutex_lock_common+0x48/0x38e [<ffffffff812e3c75>] mutex_lock_nested+0x2a/0x31 [<ffffffffa0041155>] hci_conn_timeout+0x62/0x158 [bluetooth] [<ffffffff810357af>] process_one_work+0x178/0x2bf [<ffffffff81036178>] worker_thread+0xce/0x152 [<ffffffff81039a03>] kthread+0x95/0x9d [<ffffffff812e7754>] kernel_thread_helper+0x4/0x10 other info that might help us debug this: Chain exists of: &hdev->lock --> slock-AF_BLUETOOTH-BTPROTO_L2CAP --> (&(&conn->disc_work)->work) Possible unsafe locking scenario: CPU0 CPU1 ---- ---- lock((&(&conn->disc_work)->work)); lock(slock-AF_BLUETOOTH-BTPROTO_L2CAP); lock((&(&conn->disc_work)->work)); lock(&hdev->lock); *** DEADLOCK *** 2 locks held by kworker/u:1/17: #0: (hdev->name){.+.+.+}, at: [<ffffffff81035751>] process_one_work+0x11a/0x2bf #1: ((&(&conn->disc_work)->work)){+.+...}, at: [<ffffffff81035751>] process_one_work+0x11a/0x2bf stack backtrace: Pid: 17, comm: kworker/u:1 Not tainted 3.2.0+ #1 Call Trace: [<ffffffff812e06c6>] print_circular_bug+0x1f8/0x209 [<ffffffff81056d06>] __lock_acquire+0xa80/0xd74 [<ffffffff81021ef2>] ? arch_local_irq_restore+0x6/0xd [<ffffffff81022bc7>] ? vprintk+0x3f9/0x41e [<ffffffff81057444>] lock_acquire+0x8a/0xa7 [<ffffffffa0041155>] ? hci_conn_timeout+0x62/0x158 [bluetooth] [<ffffffff812e3870>] __mutex_lock_common+0x48/0x38e [<ffffffffa0041155>] ? hci_conn_timeout+0x62/0x158 [bluetooth] [<ffffffff81190fd6>] ? __dynamic_pr_debug+0x6d/0x6f [<ffffffffa0041155>] ? hci_conn_timeout+0x62/0x158 [bluetooth] [<ffffffff8105320f>] ? trace_hardirqs_off+0xd/0xf [<ffffffff812e3c75>] mutex_lock_nested+0x2a/0x31 [<ffffffffa0041155>] hci_conn_timeout+0x62/0x158 [bluetooth] [<ffffffff810357af>] process_one_work+0x178/0x2bf [<ffffffff81035751>] ? process_one_work+0x11a/0x2bf [<ffffffff81055af3>] ? lock_acquired+0x1d0/0x1df [<ffffffffa00410f3>] ? hci_acl_disconn+0x65/0x65 [bluetooth] [<ffffffff81036178>] worker_thread+0xce/0x152 [<ffffffff810407ed>] ? finish_task_switch+0x45/0xc5 [<ffffffff810360aa>] ? manage_workers.isra.25+0x16a/0x16a [<ffffffff81039a03>] kthread+0x95/0x9d [<ffffffff812e7754>] kernel_thread_helper+0x4/0x10 [<ffffffff812e5db4>] ? retint_restore_args+0x13/0x13 [<ffffffff8103996e>] ? __init_kthread_worker+0x55/0x55 [<ffffffff812e7750>] ? gs_change+0x13/0x13 Signed-off-by: Andre Guedes <andre.guedes@openbossa.org> Signed-off-by: Vinicius Costa Gomes <vinicius.gomes@openbossa.org> Reviewed-by: Ulisses Furquim <ulisses@profusion.mobi> Acked-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
2012-02-15Bluetooth: silence lockdep warningOctavian Purdila
Since bluetooth uses multiple protocols types, to avoid lockdep warnings, we need to use different lockdep classes (one for each protocol type). This is already done in bt_sock_create but it misses a couple of cases when new connections are created. This patch corrects that to fix the following warning: <4>[ 1864.732366] ======================================================= <4>[ 1864.733030] [ INFO: possible circular locking dependency detected ] <4>[ 1864.733544] 3.0.16-mid3-00007-gc9a0f62 #3 <4>[ 1864.733883] ------------------------------------------------------- <4>[ 1864.734408] t.android.btclc/4204 is trying to acquire lock: <4>[ 1864.734869] (rfcomm_mutex){+.+.+.}, at: [<c14970ea>] rfcomm_dlc_close+0x15/0x30 <4>[ 1864.735541] <4>[ 1864.735549] but task is already holding lock: <4>[ 1864.736045] (sk_lock-AF_BLUETOOTH){+.+.+.}, at: [<c1498bf7>] lock_sock+0xa/0xc <4>[ 1864.736732] <4>[ 1864.736740] which lock already depends on the new lock. <4>[ 1864.736750] <4>[ 1864.737428] <4>[ 1864.737437] the existing dependency chain (in reverse order) is: <4>[ 1864.738016] <4>[ 1864.738023] -> #1 (sk_lock-AF_BLUETOOTH){+.+.+.}: <4>[ 1864.738549] [<c1062273>] lock_acquire+0x104/0x140 <4>[ 1864.738977] [<c13d35c1>] lock_sock_nested+0x58/0x68 <4>[ 1864.739411] [<c1493c33>] l2cap_sock_sendmsg+0x3e/0x76 <4>[ 1864.739858] [<c13d06c3>] __sock_sendmsg+0x50/0x59 <4>[ 1864.740279] [<c13d0ea2>] sock_sendmsg+0x94/0xa8 <4>[ 1864.740687] [<c13d0ede>] kernel_sendmsg+0x28/0x37 <4>[ 1864.741106] [<c14969ca>] rfcomm_send_frame+0x30/0x38 <4>[ 1864.741542] [<c1496a2a>] rfcomm_send_ua+0x58/0x5a <4>[ 1864.741959] [<c1498447>] rfcomm_run+0x441/0xb52 <4>[ 1864.742365] [<c104f095>] kthread+0x63/0x68 <4>[ 1864.742742] [<c14d5182>] kernel_thread_helper+0x6/0xd <4>[ 1864.743187] <4>[ 1864.743193] -> #0 (rfcomm_mutex){+.+.+.}: <4>[ 1864.743667] [<c1061ada>] __lock_acquire+0x988/0xc00 <4>[ 1864.744100] [<c1062273>] lock_acquire+0x104/0x140 <4>[ 1864.744519] [<c14d2c70>] __mutex_lock_common+0x3b/0x33f <4>[ 1864.744975] [<c14d303e>] mutex_lock_nested+0x2d/0x36 <4>[ 1864.745412] [<c14970ea>] rfcomm_dlc_close+0x15/0x30 <4>[ 1864.745842] [<c14990d9>] __rfcomm_sock_close+0x5f/0x6b <4>[ 1864.746288] [<c1499114>] rfcomm_sock_shutdown+0x2f/0x62 <4>[ 1864.746737] [<c13d275d>] sys_socketcall+0x1db/0x422 <4>[ 1864.747165] [<c14d42f0>] syscall_call+0x7/0xb Signed-off-by: Octavian Purdila <octavian.purdila@intel.com> Acked-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
2012-02-15Bluetooth: Fix using an absolute timeout on hci_conn_put()Vinicius Costa Gomes
queue_delayed_work() expects a relative time for when that work should be scheduled. Signed-off-by: Vinicius Costa Gomes <vinicius.gomes@openbossa.org> Acked-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
2012-02-15Bluetooth: l2cap_set_timer needs jiffies as timeout valueAndrzej Kaczmarek
After moving L2CAP timers to workqueues l2cap_set_timer expects timeout value to be specified in jiffies but constants defined in miliseconds are used. This makes timeouts unreliable when CONFIG_HZ is not set to 1000. __set_chan_timer macro still uses jiffies as input to avoid multiple conversions from/to jiffies for sk_sndtimeo value which is already specified in jiffies. Signed-off-by: Andrzej Kaczmarek <andrzej.kaczmarek@tieto.com> Ackec-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
2012-02-15Bluetooth: Remove bogus inline declaration from l2cap_chan_connectJohan Hedberg
As reported by Dan Carpenter this function causes a Sparse warning and shouldn't be declared inline: include/net/bluetooth/l2cap.h:837:30 error: marked inline, but without a definition" Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Johan Hedberg <johan.hedberg@intel.com> Acked-by: Marcel Holtmann <marcel@holtmann.org>
2012-02-06mac80211: support hw scan while idleEliad Peller
Currently, mac80211 goes to idle-off before starting a scan. However, some devices that implement hw scan might not need going idle-off in order to perform a hw scan, and thus saving some energy and simplifying their state machine. (Note that this is also the case for sched scan - it currently doesn't make mac80211 go idle-off) Add a new flag to indicate support for hw scan while idle. Signed-off-by: Eliad Peller <eliad@wizery.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-02-06cfg80211/mac80211: userspace peer authorization in IBSSAntonio Quartulli
If the IBSS network is RSN-protected, let userspace authorize the stations instead of adding them as AUTHORIZED by default. Signed-off-by: Antonio Quartulli <ordex@autistici.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-02-06bcma: add extra sprom checkHauke Mehrtens
This check is needed on the BCM43224 device as it says in the capabilities it has an sprom but is extra check says it has not. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-02-06bcma: add bus num counterHauke Mehrtens
If we have two bcma buses on one computer the second will not work without this patch. Now each bus gets an own number. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-02-06bcma: add PCIe host controllerHauke Mehrtens
Some SoCs have a PCIe host controller to make it possible to attach some other devices to it, like an other Wifi card. This code was tested with an Netgear WNDR3400 (bcm4716 based), but should work with all bcma based SoCs. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-02-06bcma: make some functions __devinitHauke Mehrtens
bcma_core_pci_hostmode_init() has to be in __devinit as it will call a function in that section and so all functions calling it also have to be in __devinit. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-02-06bcma: add constants for PCI and use themHauke Mehrtens
There are many magic numbers used in the PCIe code. Replace them with some constants from the Broadcom SDK and also use them in the pcie host controller. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-02-06bcma: add the core unit numberHauke Mehrtens
Some SoCs have two pcie or gmac cores and we need to know the number of the specific core on the bus. This is the case for the BCM4706. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-02-06cfg80211: export cfg80211_ref_bssJohannes Berg
This is needed by mac80211 to keep a reference to a BSS alive for the auth process. Remove the old version of cfg80211_ref_bss() since it's not actually used. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-02-06cfg80211: stop tracking authenticated stateJohannes Berg
To track authenticated state seems to have been a design mistake in cfg80211. It is possible to have out of band authentication (FT), tracking multiple authentications caused more problems than it ever helped, and the implementation in mac80211 is too complex. Remove all this complexity, and let userspace do whatever it wants to, mac80211 can deal with that just fine. Association is still tracked of course, but authentication no longer is. Local auth state changes are thus no longer of value, so ignore them completely. This will also help implement SAE -- asking the driver to do an authentication is now almost equivalent to sending an authentication frame, with the exception of shared key authentication which is still handled completely. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-02-06mac80211: add sta_state callbackJohannes Berg
(based on Eliad's patch) Add a callback to notify the low-level driver whenever the state of a station changes. The driver is only notified when the station is actually in the mac80211 hash table, not for pre-insert state transitions. To allow the driver to replace sta_add/remove calls with this, call extra transitions with the NOTEXIST state. This callback can fail, so we need to be careful in handling it when a station is inserted, particularly in the IBSS case where we still keep the station entry around for mac80211 purposes. Signed-off-by: Eliad Peller <eliad@wizery.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-01-30mac80211: add support for mcs masksSimon Wunderlich
* Handle MCS masks set by the user. * Match rates provided by the rate control algorithm to the mask set, also in HT mode, and switch back to legacy mode if necessary. * add debugfs files to observate the rate selection Signed-off-by: Simon Wunderlich <siwu@hrz.tu-chemnitz.de> Signed-off-by: Mathias Kretschmer <mathias.kretschmer@fokus.fraunhofer.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-01-30nl80211: add support for mcs masksSimon Wunderlich
Allow to set mcs masks through nl80211. We also allow to set MCS rates but no legacy rates (and vice versa). Signed-off-by: Simon Wunderlich <siwu@hrz.tu-chemnitz.de> Signed-off-by: Mathias Kretschmer <mathias.kretschmer@fokus.fraunhofer.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-01-30net/tcp: Fix tcp memory limits initialization when !CONFIG_SYSCTLGlauber Costa
sysctl_tcp_mem() initialization was moved to sysctl_tcp_ipv4.c in commit 3dc43e3e4d0b52197d3205214fe8f162f9e0c334, since it became a per-ns value. That code, however, will never run when CONFIG_SYSCTL is disabled, leading to bogus values on those fields - causing hung TCP sockets. This patch fixes it by keeping an initialization code in tcp_init(). It will be overwritten by the first net namespace init if CONFIG_SYSCTL is compiled in, and do the right thing if it is compiled out. It is also named properly as tcp_init_mem(), to properly signal its non-sysctl side effect on TCP limits. Reported-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Glauber Costa <glommer@parallels.com> Cc: David S. Miller <davem@davemloft.net> Link: http://lkml.kernel.org/r/4F22D05A.8030604@parallels.com [ renamed the function, tidied up the changelog a bit ] Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-01-27netns: Fail conspicously if someone uses net_generic at an inappropriate time.Eric W. Biederman
By definition net_generic should never be called when it can return NULL. Fail conspicously with a BUG_ON to make it clear when people mess up that a NULL return should never happen. Recently there was a bug in the CAIF subsystem where it was registered with register_pernet_device instead of register_pernet_subsys. It was erroneously concluded that net_generic could validly return NULL and that net_assign_generic was buggy (when it was just inefficient). Hopefully this BUG_ON will prevent people to coming to similar erroneous conclusions in the futrue. Signed-off-by: Eric W. Biederman <ebiederm@xmission.com> Tested-by: Sasha Levin <levinsasha928@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-01-27kernel-doc: fix new warnings in cfg80211.hRandy Dunlap
Fix new kernel-doc warnings: Warning(include/net/cfg80211.h:1165): No description found for parameter 'channel_type' Warning(include/net/cfg80211.h:2090): No description found for parameter 'probe_resp_offload' Signed-off-by: Randy Dunlap <rdunlap@xenotime.net> Cc: Johannes Berg <johannes@sipsolutions.net> Cc: linux-wireless@vger.kernel.org Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-01-27{nl,cfg,mac}80211: Add support of setting non-forwarding entity in MeshChun-Yeow Yeoh
A mesh node that joins the mesh network is by default a forwarding entity. This patch allows the mesh node to set as non-forwarding entity. Whenever dot11MeshForwarding is set to 0, the mesh node can prevent itself from forwarding the traffic which is not destined to him. Signed-off-by: Chun-Yeow Yeoh <yeohchunyeow@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-01-27mac80211: make CQM RSSI support per virtual interfaceJohannes Berg
Similar to the previous beacon filtering patch, make CQM RSSI support depend on the flags that the driver set for virtual interfaces. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Acked-by: Luciano Coelho <coelho@ti.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-01-27mac80211: make beacon filtering per virtual interfaceJohannes Berg
Due to firmware limitations, we may not be able to support beacon filtering on all virtual interfaces. To allow this in mac80211, introduce per-interface driver capability flags that the driver sets when an interface is added. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Acked-by: Luciano Coelho <coelho@ti.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-01-26net: explicitly add jump_label.h header to sock.hGlauber Costa
Commit 36a1211970193ce215de50ed1e4e1272bc814df1 removed linux/module.h include statement from one of the headers that end up in net/sock.h. It was providing us with static_branch() definition implicitly, so after its removal the build got broken. To fix this, and avoid having this happening in the future, let me do the right thing and include linux/jump_label.h explicitly in sock.h. Signed-off-by: Glauber Costa <glommer@parallels.com> Reported-by: Randy Dunlap <rdunlap@xenotime.net> CC: David S. Miller <davem@davemloft.net> Signed-off-by: David S. Miller <davem@davemloft.net>
generated by cgit v1.2.3 (git 2.39.1) at 2024-07-16 12:24:52 +0000