summaryrefslogtreecommitdiff
path: root/sound
AgeCommit message (Collapse)Author
2011-04-06ASoC: Add max98095 CODEC driverPeter Hsiang
This patch adds the MAX98095 CODEC driver. Signed-off-by: Peter Hsiang <peter.hsiang@maxim-ic.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-04-06Merge branch 'for-2.6.39' into for-2.6.40Mark Brown
2011-04-06ASoC: Tegra: Suspend/resume supportStephen Warren
ASoC machine drivers that are their own platform_driver (as opposed to those using the soc-audio platform_driver) need to explicitly set up power-management operation callbacks. To avoid cut/paste, snd_soc_pm_ops also needs to be exported. Signed-off-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-04-05Merge branch 'for-2.6.40' of ↵Takashi Iwai
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound-2.6 into topic/asoc
2011-04-05ASoC: Add bias level data to DAPM context debugfsMark Brown
This is also in the old sysfs diagnostics but it's nice to have everything in one place. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-04-05ASoC: Fix comment width in soc-cache.cMark Brown
Lines should be less than 80 columns. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-04-05ASoC: Remove excessively verbose logging on I2C writeMark Brown
We don't need to log every I2C transfer, and certainly not at error level. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-04-05ASoC: Fix to avoid compile errorSeungwhan Youn
This patch fixes to avoid compile error when ASoC codec doesn't use I2C nor SPI on snd_soc_hw_bulk_write_raw(). Signed-off-by: Seungwhan Youn <sw.youn@samsung.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-04-03Merge branch 'for-2.6.39' into for-2.6.40Mark Brown
2011-04-03ASoC: format_register_str: Don't clip register valuesStephen Warren
wordsize is used as the textual width of a register address. regsize is used as the textual width of a register value. The assignments to these values were swapped. In the case of WM8903, which has 8-bit register addresses and 16-bit register values, this caused the register values to be clipped to 2 digits instead of the full 4. Signed-off-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-04-03ASoC: Properly handle spitz MIC GPIOMarek Vasut
This patch firstly restructurizes the code a bit by getting rid of continuous checking for machine type in spitz_mic_bias(). Then the patch properly requests the MIC GPIO in the spitz_init() and frees it in spitz_exit(). Signed-off-by: Marek Vasut <marek.vasut@gmail.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-04-03ASoC: Name jack GPIOs based on jack not codecStephen Warren
snd_soc_jack_gpio has a name field. Use that name when registering the IRQ, since this is far more informative than the codec driver name. This shows up in /proc/interrupts. Signed-off-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-04-03Merge branch 'for-2.6.39' into for-2.6.40Mark Brown
2011-04-03Merge branch 'for-2.6.39' of ↵Mark Brown
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound-2.6 into for-2.6.39
2011-04-03ASoC: PXA: Fix oops in __pxa2xx_pcm_prepareVasily Khoruzhick
pxa2xx_pcm_hw_free frees dma channel and sets prtd->dma_ch to -1, but does not set prtd->params to NULL, so if pxa2xx_pcm_hw_params will be called immediately, it leaves prtd->dma_ch initialized with -1, and it results in oops in __pxa2xx_pcm_prepare. This bug is triggered via SDL. This patch adds check for prtd->dma_ch to __pxa2xx_pcm_prepare and cleans prtd->params, so now it works properly. Signed-off-by: Vasily Khoruzhick <anarsoul@gmail.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-03-31ASoC: Use data based init for sn95031 DAPMLu Guanqun
Signed-off-by: Lu Guanqun <guanqun.lu@intel.com> Acked-by: Liam Girdwood <lrg@ti.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-03-31ASoC: Use data based init for ak4535 DAPMLu Guanqun
Signed-off-by: Lu Guanqun <guanqun.lu@intel.com> Acked-by: Liam Girdwood <lrg@ti.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-03-31ASoC: Use data based init for tlv320aic23 DAPMLu Guanqun
Signed-off-by: Lu Guanqun <guanqun.lu@intel.com> Acked-by: Liam Girdwood <lrg@ti.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-03-31ASoC: Use data based init for wm8711 DAPMLu Guanqun
Signed-off-by: Lu Guanqun <guanqun.lu@intel.com> Acked-by: Liam Girdwood <lrg@ti.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-03-31ASoC: Use data based init for wm8728 DAPMLu Guanqun
Signed-off-by: Lu Guanqun <guanqun.lu@intel.com> Acked-by: Liam Girdwood <lrg@ti.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-03-31ASoC: Use data based init for wm9705 DAPMLu Guanqun
Signed-off-by: Lu Guanqun <guanqun.lu@intel.com> Acked-by: Liam Girdwood <lrg@ti.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-03-31ASoC: Use data based init for wm9712 DAPMLu Guanqun
Signed-off-by: Lu Guanqun <guanqun.lu@intel.com> Acked-by: Liam Girdwood <lrg@ti.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-03-31ASoC: Use data based init for wm9713 DAPMLu Guanqun
Signed-off-by: Lu Guanqun <guanqun.lu@intel.com> Acked-by: Liam Girdwood <lrg@ti.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-03-31ASoC: Use data based init for max98088 DAPMLu Guanqun
Signed-off-by: Lu Guanqun <guanqun.lu@intel.com> Acked-by: Liam Girdwood <lrg@ti.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-03-31ASoC: Use data based init for cx20442 DAPMLu Guanqun
Signed-off-by: Lu Guanqun <guanqun.lu@intel.com> Acked-by: Liam Girdwood <lrg@ti.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-03-31ASoC: Use data based init for ak4671 DAPMLu Guanqun
Signed-off-by: Lu Guanqun <guanqun.lu@intel.com> Acked-by: Liam Girdwood <lrg@ti.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-03-31ASoC: soc-cache: Warn on syncing any non-writable registersDimitris Papastamos
When syncing the cache, if the driver has given us a writable_register() callback, use it to check if we are syncing a non-writable register and if so warn the user. Signed-off-by: Dimitris Papastamos <dp@opensource.wolfsonmicro.com> Acked-by: Liam Girdwood <lrg@ti.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-03-31ASoC: soc-cache: Fix indentation issuesDimitris Papastamos
Signed-off-by: Dimitris Papastamos <dp@opensource.wolfsonmicro.com> Acked-by: Liam Girdwood <lrg@ti.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-03-30ASoC: zylonite: set .codec_dai_name in initializerAntonio Ospite
Fix the initialization of .codec_dai_name in zylonite_dai initializer, do not mix it with the initialization of .codec_name which is set already a few lines above. Signed-off-by: Antonio Ospite <ospite@studenti.unina.it> Acked-by: Eric Miao <eric.y.miao@gmail.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-03-30ASoC: Blackfin: push down SPORT settings from global variablesBarry Song
Now that we have multi-component support, take the time to unify the SPORT implementations a bit and make the setup dynamic. This kills off the global sport_handle which was shared across all the Blackfin machine drivers. The pin management aspect is off loaded to platform resources, and now multiple SPORTs can be instantiated simultaneously. Signed-off-by: Barry Song <barry.song@analog.com> Signed-off-by: Scott Jiang <scott.jiang@analog.com> Signed-off-by: Mike Frysinger <vapier@gentoo.org> Acked-by: Liam Girdwood <lrg@ti.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-03-30ASoC: Blackfin: standardize machine driver namesMike Frysinger
Some machine drivers were using "bf5xx-", others were using "bf5xx_", while others were using "bfin-". Further, some were using the same name in the transport layer which makes it hard to use different codecs at the same time. So standardize all of them to "bfin-" and make sure they are name spaced according to their driver name. Signed-off-by: Mike Frysinger <vapier@gentoo.org> Acked-by: Liam Girdwood <lrg@ti.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-03-30ASoC: Blackfin: drop "-codec" from codec namesMike Frysinger
The recent multi-component patch incorrectly added "-codec" suffixes to parts which are not MFD. Drop the suffix from the machine drivers too. Signed-off-by: Mike Frysinger <vapier@gentoo.org> Acked-by: Liam Girdwood <lrg@ti.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-03-30ASoC: Blackfin: add ad193x sysclk configurationScott Jiang
Signed-off-by: Scott Jiang <scott.jiang@analog.com> Signed-off-by: Mike Frysinger <vapier@gentoo.org> Acked-by: Liam Girdwood <lrg@ti.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-03-30ASoC: SSM2602: convert to soc-cacheCliff Cai
Signed-off-by: Cliff Cai <cliff.cai@analog.com> Signed-off-by: Mike Frysinger <vapier@gentoo.org> Acked-by: Liam Girdwood <lrg@ti.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-03-30ASoC: ad1980: fix codec nameMike Frysinger
The codec name should not have a "-codec" suffix since this is not part of a MFD. This was incorrectly changed during the multi-component updated. Signed-off-by: Mike Frysinger <vapier@gentoo.org> Acked-by: Liam Girdwood <lrg@ti.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-03-30ASoC: ad193x: fix codec nameMike Frysinger
The codec name should not have a "-codec" suffix since this is not part of a MFD. This was incorrectly changed during the multi-component updated. Signed-off-by: Mike Frysinger <vapier@gentoo.org> Acked-by: Liam Girdwood <lrg@ti.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-03-30ASoC: ad73311: fix codec nameMike Frysinger
The codec name should not have a "-codec" suffix since this is not part of a MFD. This was incorrectly changed during the multi-component updated. Signed-off-by: Mike Frysinger <vapier@gentoo.org> Acked-by: Liam Girdwood <lrg@ti.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-03-30ASoC: SSM2602: fix codec nameMike Frysinger
The codec name should not have a "-codec" suffix since this is not part of a MFD. This was incorrectly changed during the multi-component updated. Signed-off-by: Mike Frysinger <vapier@gentoo.org> Acked-by: Liam Girdwood <lrg@ti.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-03-30ASoC: fix sorting order of codecs in kconfigMike Frysinger
Signed-off-by: Mike Frysinger <vapier@gentoo.org> Acked-by: Liam Girdwood <lrg@ti.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-03-30ASoC: Remove -codec from WM8731 driver nameMark Brown
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Liam Girdwood <lrg@ti.com>
2011-03-30ASoC: Convert WM8731 to table based DAPM setupMark Brown
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Liam Girdwood <lrg@ti.com>
2011-03-30ASoC: Convert WM8903 to table based DAPM setupMark Brown
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Liam Girdwood <lrg@ti.com>
2011-03-30Merge branch 'for-2.6.39' into for-2.6.40Mark Brown
2011-03-30ASoC: Fix CODEC device name for CorgiMark Brown
Got typoed in the multi-component changes. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Liam Girdwood <lrg@ti.com> Cc: stable@kernel.org
2011-03-28Merge branch 'for-2.6.39' of ↵Takashi Iwai
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound-2.6 into fix/asoc
2011-03-28Merge branch 'for-2.6.39' of ↵Takashi Iwai
git://git.kernel.org/pub/scm/linux/kernel/git/lrg/asoc-2.6 into fix/asoc
2011-03-28ALSA: hda - Fix pin-config of Gigabyte moboTakashi Iwai
Use pin-fix instead of the static quirk for Gigabyte mobos 1458:a002. Bugzilla: https://bugzilla.novell.com/show_bug.cgi?id=677256 Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-03-27Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound-2.6 * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound-2.6: ALSA: Fix yet another race in disconnection ALSA: asihpi - Update verbose debug print macros ALSA: asihpi - Improve non-busmaster adapter operation ALSA: asihpi - Support single-rate no-SRC cards ALSA: HDA: New AD1984A model for Dell Precision R5500 ALSA: vmalloc buffers should use normal mmap ALSA: hda - Fix SPDIF out regression on ALC889 ALSA: usb-audio - Support for Boss JS-8 Jam Station ALSA: usb-audio: add Cakewalk UM-1G support sound/oss/opl3: validate voice and channel indexes sound/oss: remove offset from load_patch callbacks
2011-03-26ASoC: ad73311: drop I2C requirementScott Jiang
The AD73311 codec does not use I2C, so don't require it in Kconfig. Signed-off-by: Scott Jiang <scott.jiang@analog.com> Signed-off-by: Mike Frysinger <vapier@gentoo.org> Acked-by: Liam Girdwood <lrg@ti.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-03-26ASoC: ad193x: tweak style to match other codecsScott Jiang
Rename the snd_soc_control_type field from "bus_type" to "control_type", and drop the now unused "control_data" field. Signed-off-by: Scott Jiang <scott.jiang@analog.com> Signed-off-by: Mike Frysinger <vapier@gentoo.org> Acked-by: Liam Girdwood <lrg@ti.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
generated by cgit v1.2.3 (git 2.39.1) at 2024-08-13 06:40:27 +0000