From 871b72dd1e12afc3f024479531d25a9339d2e3f9 Mon Sep 17 00:00:00 2001 From: Dmitry Adamushko Date: Mon, 11 May 2009 23:48:27 +0200 Subject: x86: microcode: use smp_call_function_single instead of set_cpus_allowed, cleanup of synchronization logic * Solve issues described in 6f66cbc63081fd70e3191b4dbb796746780e5ae1 in a way that doesn't resort to set_cpus_allowed(); * in fact, only collect_cpu_info and apply_microcode callbacks must run on a target cpu, others will do just fine on any other. smp_call_function_single() (as suggested by Ingo) is used to run these callbacks on a target cpu. * cleanup of synchronization logic of the 'microcode_core' part The generic 'microcode_core' part guarantees that only a single cpu (be it a full-fledged cpu, one of the cores or HT) is being updated at any particular moment of time. In general, there is no need for any additional sync. mechanism in arch-specific parts (the patch removes existing spinlocks). See also the "Synchronization" section in microcode_core.c. * return -EINVAL instead of -1 (which is translated into -EPERM) in microcode_write(), reload_cpu() and mc_sysdev_add(). Other suggestions for an error code? * use 'enum ucode_state' as return value of request_microcode_{fw, user} to gain more flexibility by distinguishing between real error cases and situations when an appropriate ucode was not found (which is not an error per-se). * some minor cleanups Thanks a lot to Hugh Dickins for review/suggestions/testing! Reference: http://marc.info/?l=linux-kernel&m=124025889012541&w=2 [ Impact: refactor and clean up microcode driver locking code ] Signed-off-by: Dmitry Adamushko Acked-by: Hugh Dickins Cc: Andrew Morton Cc: Rusty Russell Cc: Andreas Herrmann Cc: Peter Oruba Cc: Arjan van de Ven LKML-Reference: <1242078507.5560.9.camel@earth> [ did some more cleanups ] Signed-off-by: Ingo Molnar arch/x86/include/asm/microcode.h | 25 ++ arch/x86/kernel/microcode_amd.c | 58 ++---- arch/x86/kernel/microcode_core.c | 326 +++++++++++++++++++++----------------- arch/x86/kernel/microcode_intel.c | 92 +++------- 4 files changed, 261 insertions(+), 240 deletions(-) (~20 new comment lines) --- arch/x86/kernel/microcode_amd.c | 58 +++---- arch/x86/kernel/microcode_core.c | 329 ++++++++++++++++++++++---------------- arch/x86/kernel/microcode_intel.c | 90 ++++------- 3 files changed, 244 insertions(+), 233 deletions(-) (limited to 'arch/x86/kernel') diff --git a/arch/x86/kernel/microcode_amd.c b/arch/x86/kernel/microcode_amd.c index 453b5795a5c..c8be20f1644 100644 --- a/arch/x86/kernel/microcode_amd.c +++ b/arch/x86/kernel/microcode_amd.c @@ -13,25 +13,13 @@ * Licensed under the terms of the GNU General Public * License version 2. See file COPYING for details. */ -#include -#include -#include #include -#include -#include #include #include #include #include #include -#include -#include -#include -#include -#include #include -#include -#include #include #include @@ -79,9 +67,6 @@ struct microcode_amd { #define UCODE_CONTAINER_SECTION_HDR 8 #define UCODE_CONTAINER_HEADER_SIZE 12 -/* serialize access to the physical write */ -static DEFINE_SPINLOCK(microcode_update_lock); - static struct equiv_cpu_entry *equiv_cpu_table; static int collect_cpu_info_amd(int cpu, struct cpu_signature *csig) @@ -144,9 +129,8 @@ static int get_matching_microcode(int cpu, void *mc, int rev) return 1; } -static void apply_microcode_amd(int cpu) +static int apply_microcode_amd(int cpu) { - unsigned long flags; u32 rev, dummy; int cpu_num = raw_smp_processor_id(); struct ucode_cpu_info *uci = ucode_cpu_info + cpu_num; @@ -156,25 +140,25 @@ static void apply_microcode_amd(int cpu) BUG_ON(cpu_num != cpu); if (mc_amd == NULL) - return; + return 0; - spin_lock_irqsave(µcode_update_lock, flags); wrmsrl(MSR_AMD64_PATCH_LOADER, (u64)(long)&mc_amd->hdr.data_code); /* get patch id after patching */ rdmsr(MSR_AMD64_PATCH_LEVEL, rev, dummy); - spin_unlock_irqrestore(µcode_update_lock, flags); /* check current patch id and patch's id for match */ if (rev != mc_amd->hdr.patch_id) { printk(KERN_ERR "microcode: CPU%d: update failed " "(for patch_level=0x%x)\n", cpu, mc_amd->hdr.patch_id); - return; + return -1; } printk(KERN_INFO "microcode: CPU%d: updated (new patch_level=0x%x)\n", cpu, rev); uci->cpu_sig.rev = rev; + + return 0; } static int get_ucode_data(void *to, const u8 *from, size_t n) @@ -263,7 +247,8 @@ static void free_equiv_cpu_table(void) } } -static int generic_load_microcode(int cpu, const u8 *data, size_t size) +static enum ucode_state +generic_load_microcode(int cpu, const u8 *data, size_t size) { struct ucode_cpu_info *uci = ucode_cpu_info + cpu; const u8 *ucode_ptr = data; @@ -272,12 +257,13 @@ static int generic_load_microcode(int cpu, const u8 *data, size_t size) int new_rev = uci->cpu_sig.rev; unsigned int leftover; unsigned long offset; + enum ucode_state state = UCODE_OK; offset = install_equiv_cpu_table(ucode_ptr); if (!offset) { printk(KERN_ERR "microcode: failed to create " "equivalent cpu table\n"); - return -EINVAL; + return UCODE_ERROR; } ucode_ptr += offset; @@ -312,28 +298,27 @@ static int generic_load_microcode(int cpu, const u8 *data, size_t size) pr_debug("microcode: CPU%d found a matching microcode " "update with version 0x%x (current=0x%x)\n", cpu, new_rev, uci->cpu_sig.rev); - } else + } else { vfree(new_mc); - } + state = UCODE_ERROR; + } + } else + state = UCODE_NFOUND; free_equiv_cpu_table(); - return (int)leftover; + return state; } -static int request_microcode_fw(int cpu, struct device *device) +static enum ucode_state request_microcode_fw(int cpu, struct device *device) { const char *fw_name = "amd-ucode/microcode_amd.bin"; const struct firmware *firmware; - int ret; - - /* We should bind the task to the CPU */ - BUG_ON(cpu != raw_smp_processor_id()); + enum ucode_state ret; - ret = request_firmware(&firmware, fw_name, device); - if (ret) { + if (request_firmware(&firmware, fw_name, device)) { printk(KERN_ERR "microcode: failed to load file %s\n", fw_name); - return ret; + return UCODE_NFOUND; } ret = generic_load_microcode(cpu, firmware->data, firmware->size); @@ -343,11 +328,12 @@ static int request_microcode_fw(int cpu, struct device *device) return ret; } -static int request_microcode_user(int cpu, const void __user *buf, size_t size) +static enum ucode_state +request_microcode_user(int cpu, const void __user *buf, size_t size) { printk(KERN_INFO "microcode: AMD microcode update via " "/dev/cpu/microcode not supported\n"); - return -1; + return UCODE_ERROR; } static void microcode_fini_cpu_amd(int cpu) diff --git a/arch/x86/kernel/microcode_core.c b/arch/x86/kernel/microcode_core.c index 98c470c069d..9c4461501fc 100644 --- a/arch/x86/kernel/microcode_core.c +++ b/arch/x86/kernel/microcode_core.c @@ -71,27 +71,18 @@ * Thanks to Stuart Swales for pointing out this bug. */ #include -#include #include -#include +#include #include -#include -#include -#include -#include #include #include #include -#include -#include -#include #include #include #include #include #include -#include MODULE_DESCRIPTION("Microcode Update Driver"); MODULE_AUTHOR("Tigran Aivazian "); @@ -101,36 +92,110 @@ MODULE_LICENSE("GPL"); static struct microcode_ops *microcode_ops; -/* no concurrent ->write()s are allowed on /dev/cpu/microcode */ +/* + * Synchronization. + * + * All non cpu-hotplug-callback call sites use: + * + * - microcode_mutex to synchronize with each other; + * - get/put_online_cpus() to synchronize with + * the cpu-hotplug-callback call sites. + * + * We guarantee that only a single cpu is being + * updated at any particular moment of time. + */ static DEFINE_MUTEX(microcode_mutex); struct ucode_cpu_info ucode_cpu_info[NR_CPUS]; EXPORT_SYMBOL_GPL(ucode_cpu_info); +/* + * Operations that are run on a target cpu: + */ + +struct cpu_info_ctx { + struct cpu_signature *cpu_sig; + int err; +}; + +static void collect_cpu_info_local(void *arg) +{ + struct cpu_info_ctx *ctx = arg; + + ctx->err = microcode_ops->collect_cpu_info(smp_processor_id(), + ctx->cpu_sig); +} + +static int collect_cpu_info_on_target(int cpu, struct cpu_signature *cpu_sig) +{ + struct cpu_info_ctx ctx = { .cpu_sig = cpu_sig, .err = 0 }; + int ret; + + ret = smp_call_function_single(cpu, collect_cpu_info_local, &ctx, 1); + if (!ret) + ret = ctx.err; + + return ret; +} + +static int collect_cpu_info(int cpu) +{ + struct ucode_cpu_info *uci = ucode_cpu_info + cpu; + int ret; + + memset(uci, 0, sizeof(*uci)); + + ret = collect_cpu_info_on_target(cpu, &uci->cpu_sig); + if (!ret) + uci->valid = 1; + + return ret; +} + +struct apply_microcode_ctx { + int err; +}; + +static void apply_microcode_local(void *arg) +{ + struct apply_microcode_ctx *ctx = arg; + + ctx->err = microcode_ops->apply_microcode(smp_processor_id()); +} + +static int apply_microcode_on_target(int cpu) +{ + struct apply_microcode_ctx ctx = { .err = 0 }; + int ret; + + ret = smp_call_function_single(cpu, apply_microcode_local, &ctx, 1); + if (!ret) + ret = ctx.err; + + return ret; +} + #ifdef CONFIG_MICROCODE_OLD_INTERFACE static int do_microcode_update(const void __user *buf, size_t size) { - cpumask_t old; int error = 0; int cpu; - old = current->cpus_allowed; - for_each_online_cpu(cpu) { struct ucode_cpu_info *uci = ucode_cpu_info + cpu; + enum ucode_state ustate; if (!uci->valid) continue; - set_cpus_allowed_ptr(current, &cpumask_of_cpu(cpu)); - error = microcode_ops->request_microcode_user(cpu, buf, size); - if (error < 0) - goto out; - if (!error) - microcode_ops->apply_microcode(cpu); + ustate = microcode_ops->request_microcode_user(cpu, buf, size); + if (ustate == UCODE_ERROR) { + error = -1; + break; + } else if (ustate == UCODE_OK) + apply_microcode_on_target(cpu); } -out: - set_cpus_allowed_ptr(current, &old); + return error; } @@ -143,19 +208,17 @@ static int microcode_open(struct inode *unused1, struct file *unused2) static ssize_t microcode_write(struct file *file, const char __user *buf, size_t len, loff_t *ppos) { - ssize_t ret; + ssize_t ret = -EINVAL; if ((len >> PAGE_SHIFT) > num_physpages) { - printk(KERN_ERR "microcode: too much data (max %ld pages)\n", - num_physpages); - return -EINVAL; + pr_err("microcode: too much data (max %ld pages)\n", num_physpages); + return ret; } get_online_cpus(); mutex_lock(µcode_mutex); - ret = do_microcode_update(buf, len); - if (!ret) + if (do_microcode_update(buf, len) == 0) ret = (ssize_t)len; mutex_unlock(µcode_mutex); @@ -165,15 +228,15 @@ static ssize_t microcode_write(struct file *file, const char __user *buf, } static const struct file_operations microcode_fops = { - .owner = THIS_MODULE, - .write = microcode_write, - .open = microcode_open, + .owner = THIS_MODULE, + .write = microcode_write, + .open = microcode_open, }; static struct miscdevice microcode_dev = { - .minor = MICROCODE_MINOR, - .name = "microcode", - .fops = µcode_fops, + .minor = MICROCODE_MINOR, + .name = "microcode", + .fops = µcode_fops, }; static int __init microcode_dev_init(void) @@ -182,9 +245,7 @@ static int __init microcode_dev_init(void) error = misc_register(µcode_dev); if (error) { - printk(KERN_ERR - "microcode: can't misc_register on minor=%d\n", - MICROCODE_MINOR); + pr_err("microcode: can't misc_register on minor=%d\n", MICROCODE_MINOR); return error; } @@ -205,42 +266,51 @@ MODULE_ALIAS_MISCDEV(MICROCODE_MINOR); /* fake device for request_firmware */ static struct platform_device *microcode_pdev; -static long reload_for_cpu(void *unused) +static int reload_for_cpu(int cpu) { - struct ucode_cpu_info *uci = ucode_cpu_info + smp_processor_id(); + struct ucode_cpu_info *uci = ucode_cpu_info + cpu; int err = 0; mutex_lock(µcode_mutex); if (uci->valid) { - err = microcode_ops->request_microcode_fw(smp_processor_id(), - µcode_pdev->dev); - if (!err) - microcode_ops->apply_microcode(smp_processor_id()); + enum ucode_state ustate; + + ustate = microcode_ops->request_microcode_fw(cpu, µcode_pdev->dev); + if (ustate == UCODE_OK) + apply_microcode_on_target(cpu); + else + if (ustate == UCODE_ERROR) + err = -EINVAL; } mutex_unlock(µcode_mutex); + return err; } static ssize_t reload_store(struct sys_device *dev, struct sysdev_attribute *attr, - const char *buf, size_t sz) + const char *buf, size_t size) { - char *end; - unsigned long val = simple_strtoul(buf, &end, 0); - int err = 0; + unsigned long val; int cpu = dev->id; + int ret = 0; + char *end; + val = simple_strtoul(buf, &end, 0); if (end == buf) return -EINVAL; + if (val == 1) { get_online_cpus(); if (cpu_online(cpu)) - err = work_on_cpu(cpu, reload_for_cpu, NULL); + ret = reload_for_cpu(cpu); put_online_cpus(); } - if (err) - return err; - return sz; + + if (!ret) + ret = size; + + return ret; } static ssize_t version_show(struct sys_device *dev, @@ -271,11 +341,11 @@ static struct attribute *mc_default_attrs[] = { }; static struct attribute_group mc_attr_group = { - .attrs = mc_default_attrs, - .name = "microcode", + .attrs = mc_default_attrs, + .name = "microcode", }; -static void __microcode_fini_cpu(int cpu) +static void microcode_fini_cpu(int cpu) { struct ucode_cpu_info *uci = ucode_cpu_info + cpu; @@ -283,103 +353,68 @@ static void __microcode_fini_cpu(int cpu) uci->valid = 0; } -static void microcode_fini_cpu(int cpu) -{ - mutex_lock(µcode_mutex); - __microcode_fini_cpu(cpu); - mutex_unlock(µcode_mutex); -} - -static void collect_cpu_info(int cpu) +static enum ucode_state microcode_resume_cpu(int cpu) { struct ucode_cpu_info *uci = ucode_cpu_info + cpu; - memset(uci, 0, sizeof(*uci)); - if (!microcode_ops->collect_cpu_info(cpu, &uci->cpu_sig)) - uci->valid = 1; + if (!uci->mc) + return UCODE_NFOUND; + + pr_debug("microcode: CPU%d updated upon resume\n", cpu); + apply_microcode_on_target(cpu); + + return UCODE_OK; } -static int microcode_resume_cpu(int cpu) +static enum ucode_state microcode_init_cpu(int cpu) { - struct ucode_cpu_info *uci = ucode_cpu_info + cpu; - struct cpu_signature nsig; + enum ucode_state ustate; - pr_debug("microcode: CPU%d resumed\n", cpu); + if (collect_cpu_info(cpu)) + return UCODE_ERROR; - if (!uci->mc) - return 1; + /* --dimm. Trigger a delayed update? */ + if (system_state != SYSTEM_RUNNING) + return UCODE_NFOUND; - /* - * Let's verify that the 'cached' ucode does belong - * to this cpu (a bit of paranoia): - */ - if (microcode_ops->collect_cpu_info(cpu, &nsig)) { - __microcode_fini_cpu(cpu); - printk(KERN_ERR "failed to collect_cpu_info for resuming cpu #%d\n", - cpu); - return -1; - } + ustate = microcode_ops->request_microcode_fw(cpu, µcode_pdev->dev); - if ((nsig.sig != uci->cpu_sig.sig) || (nsig.pf != uci->cpu_sig.pf)) { - __microcode_fini_cpu(cpu); - printk(KERN_ERR "cached ucode doesn't match the resuming cpu #%d\n", - cpu); - /* Should we look for a new ucode here? */ - return 1; + if (ustate == UCODE_OK) { + pr_debug("microcode: CPU%d updated upon init\n", cpu); + apply_microcode_on_target(cpu); } - return 0; + return ustate; } -static long microcode_update_cpu(void *unused) +static enum ucode_state microcode_update_cpu(int cpu) { - struct ucode_cpu_info *uci = ucode_cpu_info + smp_processor_id(); - int err = 0; + struct ucode_cpu_info *uci = ucode_cpu_info + cpu; + enum ucode_state ustate; - /* - * Check if the system resume is in progress (uci->valid != NULL), - * otherwise just request a firmware: - */ - if (uci->valid) { - err = microcode_resume_cpu(smp_processor_id()); - } else { - collect_cpu_info(smp_processor_id()); - if (uci->valid && system_state == SYSTEM_RUNNING) - err = microcode_ops->request_microcode_fw( - smp_processor_id(), - µcode_pdev->dev); - } - if (!err) - microcode_ops->apply_microcode(smp_processor_id()); - return err; -} + if (uci->valid) + ustate = microcode_resume_cpu(cpu); + else + ustate = microcode_init_cpu(cpu); -static int microcode_init_cpu(int cpu) -{ - int err; - mutex_lock(µcode_mutex); - err = work_on_cpu(cpu, microcode_update_cpu, NULL); - mutex_unlock(µcode_mutex); - - return err; + return ustate; } static int mc_sysdev_add(struct sys_device *sys_dev) { int err, cpu = sys_dev->id; - struct ucode_cpu_info *uci = ucode_cpu_info + cpu; if (!cpu_online(cpu)) return 0; pr_debug("microcode: CPU%d added\n", cpu); - memset(uci, 0, sizeof(*uci)); err = sysfs_create_group(&sys_dev->kobj, &mc_attr_group); if (err) return err; - err = microcode_init_cpu(cpu); + if (microcode_init_cpu(cpu) == UCODE_ERROR) + err = -EINVAL; return err; } @@ -400,19 +435,30 @@ static int mc_sysdev_remove(struct sys_device *sys_dev) static int mc_sysdev_resume(struct sys_device *dev) { int cpu = dev->id; + struct ucode_cpu_info *uci = ucode_cpu_info + cpu; if (!cpu_online(cpu)) return 0; - /* only CPU 0 will apply ucode here */ - microcode_update_cpu(NULL); + /* + * All non-bootup cpus are still disabled, + * so only CPU 0 will apply ucode here. + * + * Moreover, there can be no concurrent + * updates from any other places at this point. + */ + WARN_ON(cpu != 0); + + if (uci->valid && uci->mc) + microcode_ops->apply_microcode(cpu); + return 0; } static struct sysdev_driver mc_sysdev_driver = { - .add = mc_sysdev_add, - .remove = mc_sysdev_remove, - .resume = mc_sysdev_resume, + .add = mc_sysdev_add, + .remove = mc_sysdev_remove, + .resume = mc_sysdev_resume, }; static __cpuinit int @@ -425,15 +471,12 @@ mc_cpu_callback(struct notifier_block *nb, unsigned long action, void *hcpu) switch (action) { case CPU_ONLINE: case CPU_ONLINE_FROZEN: - if (microcode_init_cpu(cpu)) - printk(KERN_ERR "microcode: failed to init CPU%d\n", - cpu); + microcode_update_cpu(cpu); case CPU_DOWN_FAILED: case CPU_DOWN_FAILED_FROZEN: pr_debug("microcode: CPU%d added\n", cpu); if (sysfs_create_group(&sys_dev->kobj, &mc_attr_group)) - printk(KERN_ERR "microcode: Failed to create the sysfs " - "group for CPU%d\n", cpu); + pr_err("microcode: Failed to create group for CPU%d\n", cpu); break; case CPU_DOWN_PREPARE: case CPU_DOWN_PREPARE_FROZEN: @@ -465,13 +508,10 @@ static int __init microcode_init(void) microcode_ops = init_amd_microcode(); if (!microcode_ops) { - printk(KERN_ERR "microcode: no support for this CPU vendor\n"); + pr_err("microcode: no support for this CPU vendor\n"); return -ENODEV; } - error = microcode_dev_init(); - if (error) - return error; microcode_pdev = platform_device_register_simple("microcode", -1, NULL, 0); if (IS_ERR(microcode_pdev)) { @@ -480,23 +520,31 @@ static int __init microcode_init(void) } get_online_cpus(); + mutex_lock(µcode_mutex); + error = sysdev_driver_register(&cpu_sysdev_class, &mc_sysdev_driver); + + mutex_unlock(µcode_mutex); put_online_cpus(); + if (error) { - microcode_dev_exit(); platform_device_unregister(microcode_pdev); return error; } + error = microcode_dev_init(); + if (error) + return error; + register_hotcpu_notifier(&mc_cpu_notifier); - printk(KERN_INFO - "Microcode Update Driver: v" MICROCODE_VERSION + pr_info("Microcode Update Driver: v" MICROCODE_VERSION " ," " Peter Oruba\n"); return 0; } +module_init(microcode_init); static void __exit microcode_exit(void) { @@ -505,16 +553,17 @@ static void __exit microcode_exit(void) unregister_hotcpu_notifier(&mc_cpu_notifier); get_online_cpus(); + mutex_lock(µcode_mutex); + sysdev_driver_unregister(&cpu_sysdev_class, &mc_sysdev_driver); + + mutex_unlock(µcode_mutex); put_online_cpus(); platform_device_unregister(microcode_pdev); microcode_ops = NULL; - printk(KERN_INFO - "Microcode Update Driver: v" MICROCODE_VERSION " removed.\n"); + pr_info("Microcode Update Driver: v" MICROCODE_VERSION " removed.\n"); } - -module_init(microcode_init); module_exit(microcode_exit); diff --git a/arch/x86/kernel/microcode_intel.c b/arch/x86/kernel/microcode_intel.c index 149b9ec7c1a..0d334ddd0a9 100644 --- a/arch/x86/kernel/microcode_intel.c +++ b/arch/x86/kernel/microcode_intel.c @@ -70,24 +70,11 @@ * Fix sigmatch() macro to handle old CPUs with pf == 0. * Thanks to Stuart Swales for pointing out this bug. */ -#include -#include -#include #include -#include -#include -#include #include -#include #include #include -#include -#include -#include -#include -#include -#include -#include +#include #include #include @@ -150,13 +137,9 @@ struct extended_sigtable { #define exttable_size(et) ((et)->count * EXT_SIGNATURE_SIZE + EXT_HEADER_SIZE) -/* serialize access to the physical write to MSR 0x79 */ -static DEFINE_SPINLOCK(microcode_update_lock); - static int collect_cpu_info(int cpu_num, struct cpu_signature *csig) { struct cpuinfo_x86 *c = &cpu_data(cpu_num); - unsigned long flags; unsigned int val[2]; memset(csig, 0, sizeof(*csig)); @@ -176,18 +159,14 @@ static int collect_cpu_info(int cpu_num, struct cpu_signature *csig) csig->pf = 1 << ((val[1] >> 18) & 7); } - /* serialize access to the physical write to MSR 0x79 */ - spin_lock_irqsave(µcode_update_lock, flags); - wrmsr(MSR_IA32_UCODE_REV, 0, 0); /* see notes above for revision 1.07. Apparent chip bug */ sync_core(); /* get the current revision from MSR 0x8B */ rdmsr(MSR_IA32_UCODE_REV, val[0], csig->rev); - spin_unlock_irqrestore(µcode_update_lock, flags); - pr_debug("microcode: collect_cpu_info : sig=0x%x, pf=0x%x, rev=0x%x\n", - csig->sig, csig->pf, csig->rev); + printk(KERN_INFO "microcode: CPU%d sig=0x%x, pf=0x%x, revision=0x%x\n", + cpu_num, csig->sig, csig->pf, csig->rev); return 0; } @@ -318,11 +297,10 @@ get_matching_microcode(struct cpu_signature *cpu_sig, void *mc, int rev) return 0; } -static void apply_microcode(int cpu) +static int apply_microcode(int cpu) { struct microcode_intel *mc_intel; struct ucode_cpu_info *uci; - unsigned long flags; unsigned int val[2]; int cpu_num; @@ -334,10 +312,7 @@ static void apply_microcode(int cpu) BUG_ON(cpu_num != cpu); if (mc_intel == NULL) - return; - - /* serialize access to the physical write to MSR 0x79 */ - spin_lock_irqsave(µcode_update_lock, flags); + return 0; /* write microcode via MSR 0x79 */ wrmsr(MSR_IA32_UCODE_WRITE, @@ -351,30 +326,32 @@ static void apply_microcode(int cpu) /* get the current revision from MSR 0x8B */ rdmsr(MSR_IA32_UCODE_REV, val[0], val[1]); - spin_unlock_irqrestore(µcode_update_lock, flags); if (val[1] != mc_intel->hdr.rev) { - printk(KERN_ERR "microcode: CPU%d update from revision " - "0x%x to 0x%x failed\n", - cpu_num, uci->cpu_sig.rev, val[1]); - return; + printk(KERN_ERR "microcode: CPU%d update " + "to revision 0x%x failed\n", + cpu_num, mc_intel->hdr.rev); + return -1; } - printk(KERN_INFO "microcode: CPU%d updated from revision " - "0x%x to 0x%x, date = %04x-%02x-%02x \n", - cpu_num, uci->cpu_sig.rev, val[1], + printk(KERN_INFO "microcode: CPU%d updated to revision " + "0x%x, date = %04x-%02x-%02x \n", + cpu_num, val[1], mc_intel->hdr.date & 0xffff, mc_intel->hdr.date >> 24, (mc_intel->hdr.date >> 16) & 0xff); uci->cpu_sig.rev = val[1]; + + return 0; } -static int generic_load_microcode(int cpu, void *data, size_t size, - int (*get_ucode_data)(void *, const void *, size_t)) +static enum ucode_state generic_load_microcode(int cpu, void *data, size_t size, + int (*get_ucode_data)(void *, const void *, size_t)) { struct ucode_cpu_info *uci = ucode_cpu_info + cpu; u8 *ucode_ptr = data, *new_mc = NULL, *mc; int new_rev = uci->cpu_sig.rev; unsigned int leftover = size; + enum ucode_state state = UCODE_OK; while (leftover) { struct microcode_header_intel mc_header; @@ -412,11 +389,15 @@ static int generic_load_microcode(int cpu, void *data, size_t size, leftover -= mc_size; } - if (!new_mc) + if (leftover) { + if (new_mc) + vfree(new_mc); + state = UCODE_ERROR; goto out; + } - if (leftover) { - vfree(new_mc); + if (!new_mc) { + state = UCODE_NFOUND; goto out; } @@ -427,9 +408,8 @@ static int generic_load_microcode(int cpu, void *data, size_t size, pr_debug("microcode: CPU%d found a matching microcode update with" " version 0x%x (current=0x%x)\n", cpu, new_rev, uci->cpu_sig.rev); - - out: - return (int)leftover; +out: + return state; } static int get_ucode_fw(void *to, const void *from, size_t n) @@ -438,21 +418,19 @@ static int get_ucode_fw(void *to, const void *from, size_t n) return 0; } -static int request_microcode_fw(int cpu, struct device *device) +static enum ucode_state request_microcode_fw(int cpu, struct device *device) { char name[30]; struct cpuinfo_x86 *c = &cpu_data(cpu); const struct firmware *firmware; - int ret; + enum ucode_state ret; - /* We should bind the task to the CPU */ - BUG_ON(cpu != raw_smp_processor_id()); sprintf(name, "intel-ucode/%02x-%02x-%02x", c->x86, c->x86_model, c->x86_mask); - ret = request_firmware(&firmware, name, device); - if (ret) { + + if (request_firmware(&firmware, name, device)) { pr_debug("microcode: data file %s load failed\n", name); - return ret; + return UCODE_NFOUND; } ret = generic_load_microcode(cpu, (void *)firmware->data, @@ -468,11 +446,9 @@ static int get_ucode_user(void *to, const void *from, size_t n) return copy_from_user(to, from, n); } -static int request_microcode_user(int cpu, const void __user *buf, size_t size) +static enum ucode_state +request_microcode_user(int cpu, const void __user *buf, size_t size) { - /* We should bind the task to the CPU */ - BUG_ON(cpu != raw_smp_processor_id()); - return generic_load_microcode(cpu, (void *)buf, size, &get_ucode_user); } -- cgit v1.2.3