From ccc580571cf0799d0460a085a7632b77753f083e Mon Sep 17 00:00:00 2001 From: "David S. Miller" Date: Mon, 16 Jun 2008 18:50:49 -0700 Subject: wext: Emit event stream entries correctly when compat. Three major portions to this change: 1) Add IW_EV_COMPAT_LCP_LEN, IW_EV_COMPAT_POINT_OFF, and IW_EV_COMPAT_POINT_LEN helper defines. 2) Delete iw_stream_check_add_*(), they are unused. 3) Add iw_request_info argument to iwe_stream_add_*(), and use it to size the event and pointer lengths correctly depending upon whether IW_REQUEST_FLAG_COMPAT is set or not. 4) The mechanical transformations to the drivers and wireless stack bits to get the iw_request_info passed down into the routines modified in #3. Also, explicit references to IW_EV_LCP_LEN are replaced with iwe_stream_lcp_len(info). With a lot of help and bug fixes from Masakazu Mokuno. Signed-off-by: David S. Miller --- drivers/net/wireless/airo.c | 43 ++++++++++++++-------- drivers/net/wireless/atmel.c | 24 +++++++++---- drivers/net/wireless/hostap/hostap.h | 3 +- drivers/net/wireless/hostap/hostap_ap.c | 32 ++++++++--------- drivers/net/wireless/hostap/hostap_ioctl.c | 58 ++++++++++++++++-------------- drivers/net/wireless/libertas/scan.c | 36 ++++++++++--------- drivers/net/wireless/orinoco.c | 30 ++++++++++------ drivers/net/wireless/prism54/isl_ioctl.c | 49 +++++++++++++------------ drivers/net/wireless/rndis_wlan.c | 32 +++++++++-------- drivers/net/wireless/wl3501_cs.c | 10 +++--- drivers/net/wireless/zd1201.c | 21 ++++++----- 11 files changed, 195 insertions(+), 143 deletions(-) (limited to 'drivers/net/wireless') diff --git a/drivers/net/wireless/airo.c b/drivers/net/wireless/airo.c index e30f8b79ea8..73d66a80c4a 100644 --- a/drivers/net/wireless/airo.c +++ b/drivers/net/wireless/airo.c @@ -7156,6 +7156,7 @@ out: * format that the Wireless Tools will understand - Jean II */ static inline char *airo_translate_scan(struct net_device *dev, + struct iw_request_info *info, char *current_ev, char *end_buf, BSSListRid *bss) @@ -7172,7 +7173,8 @@ static inline char *airo_translate_scan(struct net_device *dev, iwe.cmd = SIOCGIWAP; iwe.u.ap_addr.sa_family = ARPHRD_ETHER; memcpy(iwe.u.ap_addr.sa_data, bss->bssid, ETH_ALEN); - current_ev = iwe_stream_add_event(current_ev, end_buf, &iwe, IW_EV_ADDR_LEN); + current_ev = iwe_stream_add_event(info, current_ev, end_buf, + &iwe, IW_EV_ADDR_LEN); /* Other entries will be displayed in the order we give them */ @@ -7182,7 +7184,8 @@ static inline char *airo_translate_scan(struct net_device *dev, iwe.u.data.length = 32; iwe.cmd = SIOCGIWESSID; iwe.u.data.flags = 1; - current_ev = iwe_stream_add_point(current_ev, end_buf, &iwe, bss->ssid); + current_ev = iwe_stream_add_point(info, current_ev, end_buf, + &iwe, bss->ssid); /* Add mode */ iwe.cmd = SIOCGIWMODE; @@ -7192,7 +7195,8 @@ static inline char *airo_translate_scan(struct net_device *dev, iwe.u.mode = IW_MODE_MASTER; else iwe.u.mode = IW_MODE_ADHOC; - current_ev = iwe_stream_add_event(current_ev, end_buf, &iwe, IW_EV_UINT_LEN); + current_ev = iwe_stream_add_event(info, current_ev, end_buf, + &iwe, IW_EV_UINT_LEN); } /* Add frequency */ @@ -7203,7 +7207,8 @@ static inline char *airo_translate_scan(struct net_device *dev, */ iwe.u.freq.m = frequency_list[iwe.u.freq.m - 1] * 100000; iwe.u.freq.e = 1; - current_ev = iwe_stream_add_event(current_ev, end_buf, &iwe, IW_EV_FREQ_LEN); + current_ev = iwe_stream_add_event(info, current_ev, end_buf, + &iwe, IW_EV_FREQ_LEN); dBm = le16_to_cpu(bss->dBm); @@ -7223,7 +7228,8 @@ static inline char *airo_translate_scan(struct net_device *dev, | IW_QUAL_DBM; } iwe.u.qual.noise = ai->wstats.qual.noise; - current_ev = iwe_stream_add_event(current_ev, end_buf, &iwe, IW_EV_QUAL_LEN); + current_ev = iwe_stream_add_event(info, current_ev, end_buf, + &iwe, IW_EV_QUAL_LEN); /* Add encryption capability */ iwe.cmd = SIOCGIWENCODE; @@ -7232,11 +7238,12 @@ static inline char *airo_translate_scan(struct net_device *dev, else iwe.u.data.flags = IW_ENCODE_DISABLED; iwe.u.data.length = 0; - current_ev = iwe_stream_add_point(current_ev, end_buf, &iwe, bss->ssid); + current_ev = iwe_stream_add_point(info, current_ev, end_buf, + &iwe, bss->ssid); /* Rate : stuffing multiple values in a single event require a bit * more of magic - Jean II */ - current_val = current_ev + IW_EV_LCP_LEN; + current_val = current_ev + iwe_stream_lcp_len(info); iwe.cmd = SIOCGIWRATE; /* Those two flags are ignored... */ @@ -7249,10 +7256,12 @@ static inline char *airo_translate_scan(struct net_device *dev, /* Bit rate given in 500 kb/s units (+ 0x80) */ iwe.u.bitrate.value = ((bss->rates[i] & 0x7f) * 500000); /* Add new value to event */ - current_val = iwe_stream_add_value(current_ev, current_val, end_buf, &iwe, IW_EV_PARAM_LEN); + current_val = iwe_stream_add_value(info, current_ev, + current_val, end_buf, + &iwe, IW_EV_PARAM_LEN); } /* Check if we added any event */ - if((current_val - current_ev) > IW_EV_LCP_LEN) + if ((current_val - current_ev) > iwe_stream_lcp_len(info)) current_ev = current_val; /* Beacon interval */ @@ -7261,7 +7270,8 @@ static inline char *airo_translate_scan(struct net_device *dev, iwe.cmd = IWEVCUSTOM; sprintf(buf, "bcn_int=%d", bss->beaconInterval); iwe.u.data.length = strlen(buf); - current_ev = iwe_stream_add_point(current_ev, end_buf, &iwe, buf); + current_ev = iwe_stream_add_point(info, current_ev, end_buf, + &iwe, buf); kfree(buf); } @@ -7295,8 +7305,10 @@ static inline char *airo_translate_scan(struct net_device *dev, iwe.cmd = IWEVGENIE; iwe.u.data.length = min(info_element->len + 2, MAX_WPA_IE_LEN); - current_ev = iwe_stream_add_point(current_ev, end_buf, - &iwe, (char *) info_element); + current_ev = iwe_stream_add_point( + info, current_ev, + end_buf, &iwe, + (char *) info_element); } break; @@ -7304,8 +7316,9 @@ static inline char *airo_translate_scan(struct net_device *dev, iwe.cmd = IWEVGENIE; iwe.u.data.length = min(info_element->len + 2, MAX_WPA_IE_LEN); - current_ev = iwe_stream_add_point(current_ev, end_buf, - &iwe, (char *) info_element); + current_ev = iwe_stream_add_point( + info, current_ev, end_buf, + &iwe, (char *) info_element); break; default: @@ -7344,7 +7357,7 @@ static int airo_get_scan(struct net_device *dev, list_for_each_entry (net, &ai->network_list, list) { /* Translate to WE format this entry */ - current_ev = airo_translate_scan(dev, current_ev, + current_ev = airo_translate_scan(dev, info, current_ev, extra + dwrq->length, &net->bss); diff --git a/drivers/net/wireless/atmel.c b/drivers/net/wireless/atmel.c index 7bb2646ae0e..28b6ff3eaa3 100644 --- a/drivers/net/wireless/atmel.c +++ b/drivers/net/wireless/atmel.c @@ -2310,30 +2310,40 @@ static int atmel_get_scan(struct net_device *dev, iwe.cmd = SIOCGIWAP; iwe.u.ap_addr.sa_family = ARPHRD_ETHER; memcpy(iwe.u.ap_addr.sa_data, priv->BSSinfo[i].BSSID, 6); - current_ev = iwe_stream_add_event(current_ev, extra + IW_SCAN_MAX_DATA, &iwe, IW_EV_ADDR_LEN); + current_ev = iwe_stream_add_event(info, current_ev, + extra + IW_SCAN_MAX_DATA, + &iwe, IW_EV_ADDR_LEN); iwe.u.data.length = priv->BSSinfo[i].SSIDsize; if (iwe.u.data.length > 32) iwe.u.data.length = 32; iwe.cmd = SIOCGIWESSID; iwe.u.data.flags = 1; - current_ev = iwe_stream_add_point(current_ev, extra + IW_SCAN_MAX_DATA, &iwe, priv->BSSinfo[i].SSID); + current_ev = iwe_stream_add_point(info, current_ev, + extra + IW_SCAN_MAX_DATA, + &iwe, priv->BSSinfo[i].SSID); iwe.cmd = SIOCGIWMODE; iwe.u.mode = priv->BSSinfo[i].BSStype; - current_ev = iwe_stream_add_event(current_ev, extra + IW_SCAN_MAX_DATA, &iwe, IW_EV_UINT_LEN); + current_ev = iwe_stream_add_event(info, current_ev, + extra + IW_SCAN_MAX_DATA, + &iwe, IW_EV_UINT_LEN); iwe.cmd = SIOCGIWFREQ; iwe.u.freq.m = priv->BSSinfo[i].channel; iwe.u.freq.e = 0; - current_ev = iwe_stream_add_event(current_ev, extra + IW_SCAN_MAX_DATA, &iwe, IW_EV_FREQ_LEN); + current_ev = iwe_stream_add_event(info, current_ev, + extra + IW_SCAN_MAX_DATA, + &iwe, IW_EV_FREQ_LEN); /* Add quality statistics */ iwe.cmd = IWEVQUAL; iwe.u.qual.level = priv->BSSinfo[i].RSSI; iwe.u.qual.qual = iwe.u.qual.level; /* iwe.u.qual.noise = SOMETHING */ - current_ev = iwe_stream_add_event(current_ev, extra + IW_SCAN_MAX_DATA , &iwe, IW_EV_QUAL_LEN); + current_ev = iwe_stream_add_event(info, current_ev, + extra + IW_SCAN_MAX_DATA, + &iwe, IW_EV_QUAL_LEN); iwe.cmd = SIOCGIWENCODE; @@ -2342,7 +2352,9 @@ static int atmel_get_scan(struct net_device *dev, else iwe.u.data.flags = IW_ENCODE_DISABLED; iwe.u.data.length = 0; - current_ev = iwe_stream_add_point(current_ev, extra + IW_SCAN_MAX_DATA, &iwe, NULL); + current_ev = iwe_stream_add_point(info, current_ev, + extra + IW_SCAN_MAX_DATA, + &iwe, NULL); } /* Length of data */ diff --git a/drivers/net/wireless/hostap/hostap.h b/drivers/net/wireless/hostap/hostap.h index 547ba84dc79..3a386a636cc 100644 --- a/drivers/net/wireless/hostap/hostap.h +++ b/drivers/net/wireless/hostap/hostap.h @@ -67,7 +67,8 @@ void * ap_crypt_get_ptrs(struct ap_data *ap, u8 *addr, int permanent, int prism2_ap_get_sta_qual(local_info_t *local, struct sockaddr addr[], struct iw_quality qual[], int buf_size, int aplist); -int prism2_ap_translate_scan(struct net_device *dev, char *buffer); +int prism2_ap_translate_scan(struct net_device *dev, + struct iw_request_info *info, char *buffer); int prism2_hostapd(struct ap_data *ap, struct prism2_hostapd_param *param); diff --git a/drivers/net/wireless/hostap/hostap_ap.c b/drivers/net/wireless/hostap/hostap_ap.c index 0acd9589c48..06b23df8f69 100644 --- a/drivers/net/wireless/hostap/hostap_ap.c +++ b/drivers/net/wireless/hostap/hostap_ap.c @@ -2420,7 +2420,8 @@ int prism2_ap_get_sta_qual(local_info_t *local, struct sockaddr addr[], /* Translate our list of Access Points & Stations to a card independant * format that the Wireless Tools will understand - Jean II */ -int prism2_ap_translate_scan(struct net_device *dev, char *buffer) +int prism2_ap_translate_scan(struct net_device *dev, + struct iw_request_info *info, char *buffer) { struct hostap_interface *iface; local_info_t *local; @@ -2449,8 +2450,8 @@ int prism2_ap_translate_scan(struct net_device *dev, char *buffer) iwe.u.ap_addr.sa_family = ARPHRD_ETHER; memcpy(iwe.u.ap_addr.sa_data, sta->addr, ETH_ALEN); iwe.len = IW_EV_ADDR_LEN; - current_ev = iwe_stream_add_event(current_ev, end_buf, &iwe, - IW_EV_ADDR_LEN); + current_ev = iwe_stream_add_event(info, current_ev, end_buf, + &iwe, IW_EV_ADDR_LEN); /* Use the mode to indicate if it's a station or * an Access Point */ @@ -2461,8 +2462,8 @@ int prism2_ap_translate_scan(struct net_device *dev, char *buffer) else iwe.u.mode = IW_MODE_INFRA; iwe.len = IW_EV_UINT_LEN; - current_ev = iwe_stream_add_event(current_ev, end_buf, &iwe, - IW_EV_UINT_LEN); + current_ev = iwe_stream_add_event(info, current_ev, end_buf, + &iwe, IW_EV_UINT_LEN); /* Some quality */ memset(&iwe, 0, sizeof(iwe)); @@ -2477,8 +2478,8 @@ int prism2_ap_translate_scan(struct net_device *dev, char *buffer) iwe.u.qual.noise = HFA384X_LEVEL_TO_dBm(sta->last_rx_silence); iwe.u.qual.updated = sta->last_rx_updated; iwe.len = IW_EV_QUAL_LEN; - current_ev = iwe_stream_add_event(current_ev, end_buf, &iwe, - IW_EV_QUAL_LEN); + current_ev = iwe_stream_add_event(info, current_ev, end_buf, + &iwe, IW_EV_QUAL_LEN); #ifndef PRISM2_NO_KERNEL_IEEE80211_MGMT if (sta->ap) { @@ -2486,8 +2487,8 @@ int prism2_ap_translate_scan(struct net_device *dev, char *buffer) iwe.cmd = SIOCGIWESSID; iwe.u.data.length = sta->u.ap.ssid_len; iwe.u.data.flags = 1; - current_ev = iwe_stream_add_point(current_ev, end_buf, - &iwe, + current_ev = iwe_stream_add_point(info, current_ev, + end_buf, &iwe, sta->u.ap.ssid); memset(&iwe, 0, sizeof(iwe)); @@ -2497,10 +2498,9 @@ int prism2_ap_translate_scan(struct net_device *dev, char *buffer) IW_ENCODE_ENABLED | IW_ENCODE_NOKEY; else iwe.u.data.flags = IW_ENCODE_DISABLED; - current_ev = iwe_stream_add_point(current_ev, end_buf, - &iwe, - sta->u.ap.ssid - /* 0 byte memcpy */); + current_ev = iwe_stream_add_point(info, current_ev, + end_buf, &iwe, + sta->u.ap.ssid); if (sta->u.ap.channel > 0 && sta->u.ap.channel <= FREQ_COUNT) { @@ -2510,7 +2510,7 @@ int prism2_ap_translate_scan(struct net_device *dev, char *buffer) * 100000; iwe.u.freq.e = 1; current_ev = iwe_stream_add_event( - current_ev, end_buf, &iwe, + info, current_ev, end_buf, &iwe, IW_EV_FREQ_LEN); } @@ -2519,8 +2519,8 @@ int prism2_ap_translate_scan(struct net_device *dev, char *buffer) sprintf(buf, "beacon_interval=%d", sta->listen_interval); iwe.u.data.length = strlen(buf); - current_ev = iwe_stream_add_point(current_ev, end_buf, - &iwe, buf); + current_ev = iwe_stream_add_point(info, current_ev, + end_buf, &iwe, buf); } #endif /* PRISM2_NO_KERNEL_IEEE80211_MGMT */ diff --git a/drivers/net/wireless/hostap/hostap_ioctl.c b/drivers/net/wireless/hostap/hostap_ioctl.c index 0ca0bfeb0ad..ed52d98317c 100644 --- a/drivers/net/wireless/hostap/hostap_ioctl.c +++ b/drivers/net/wireless/hostap/hostap_ioctl.c @@ -1793,6 +1793,7 @@ static int prism2_ioctl_siwscan(struct net_device *dev, #ifndef PRISM2_NO_STATION_MODES static char * __prism2_translate_scan(local_info_t *local, + struct iw_request_info *info, struct hfa384x_hostscan_result *scan, struct hostap_bss_info *bss, char *current_ev, char *end_buf) @@ -1823,7 +1824,7 @@ static char * __prism2_translate_scan(local_info_t *local, iwe.cmd = SIOCGIWAP; iwe.u.ap_addr.sa_family = ARPHRD_ETHER; memcpy(iwe.u.ap_addr.sa_data, bssid, ETH_ALEN); - current_ev = iwe_stream_add_event(current_ev, end_buf, &iwe, + current_ev = iwe_stream_add_event(info, current_ev, end_buf, &iwe, IW_EV_ADDR_LEN); /* Other entries will be displayed in the order we give them */ @@ -1832,7 +1833,8 @@ static char * __prism2_translate_scan(local_info_t *local, iwe.cmd = SIOCGIWESSID; iwe.u.data.length = ssid_len; iwe.u.data.flags = 1; - current_ev = iwe_stream_add_point(current_ev, end_buf, &iwe, ssid); + current_ev = iwe_stream_add_point(info, current_ev, end_buf, + &iwe, ssid); memset(&iwe, 0, sizeof(iwe)); iwe.cmd = SIOCGIWMODE; @@ -1847,8 +1849,8 @@ static char * __prism2_translate_scan(local_info_t *local, iwe.u.mode = IW_MODE_MASTER; else iwe.u.mode = IW_MODE_ADHOC; - current_ev = iwe_stream_add_event(current_ev, end_buf, &iwe, - IW_EV_UINT_LEN); + current_ev = iwe_stream_add_event(info, current_ev, end_buf, + &iwe, IW_EV_UINT_LEN); } memset(&iwe, 0, sizeof(iwe)); @@ -1864,8 +1866,8 @@ static char * __prism2_translate_scan(local_info_t *local, if (chan > 0) { iwe.u.freq.m = freq_list[chan - 1] * 100000; iwe.u.freq.e = 1; - current_ev = iwe_stream_add_event(current_ev, end_buf, &iwe, - IW_EV_FREQ_LEN); + current_ev = iwe_stream_add_event(info, current_ev, end_buf, + &iwe, IW_EV_FREQ_LEN); } if (scan) { @@ -1884,8 +1886,8 @@ static char * __prism2_translate_scan(local_info_t *local, | IW_QUAL_NOISE_UPDATED | IW_QUAL_QUAL_INVALID | IW_QUAL_DBM; - current_ev = iwe_stream_add_event(current_ev, end_buf, &iwe, - IW_EV_QUAL_LEN); + current_ev = iwe_stream_add_event(info, current_ev, end_buf, + &iwe, IW_EV_QUAL_LEN); } memset(&iwe, 0, sizeof(iwe)); @@ -1895,13 +1897,13 @@ static char * __prism2_translate_scan(local_info_t *local, else iwe.u.data.flags = IW_ENCODE_DISABLED; iwe.u.data.length = 0; - current_ev = iwe_stream_add_point(current_ev, end_buf, &iwe, ""); + current_ev = iwe_stream_add_point(info, current_ev, end_buf, &iwe, ""); /* TODO: add SuppRates into BSS table */ if (scan) { memset(&iwe, 0, sizeof(iwe)); iwe.cmd = SIOCGIWRATE; - current_val = current_ev + IW_EV_LCP_LEN; + current_val = current_ev + iwe_stream_lcp_len(info); pos = scan->sup_rates; for (i = 0; i < sizeof(scan->sup_rates); i++) { if (pos[i] == 0) @@ -1909,11 +1911,11 @@ static char * __prism2_translate_scan(local_info_t *local, /* Bit rate given in 500 kb/s units (+ 0x80) */ iwe.u.bitrate.value = ((pos[i] & 0x7f) * 500000); current_val = iwe_stream_add_value( - current_ev, current_val, end_buf, &iwe, + info, current_ev, current_val, end_buf, &iwe, IW_EV_PARAM_LEN); } /* Check if we added any event */ - if ((current_val - current_ev) > IW_EV_LCP_LEN) + if ((current_val - current_ev) > iwe_stream_lcp_len(info)) current_ev = current_val; } @@ -1924,15 +1926,15 @@ static char * __prism2_translate_scan(local_info_t *local, iwe.cmd = IWEVCUSTOM; sprintf(buf, "bcn_int=%d", le16_to_cpu(scan->beacon_interval)); iwe.u.data.length = strlen(buf); - current_ev = iwe_stream_add_point(current_ev, end_buf, &iwe, - buf); + current_ev = iwe_stream_add_point(info, current_ev, end_buf, + &iwe, buf); memset(&iwe, 0, sizeof(iwe)); iwe.cmd = IWEVCUSTOM; sprintf(buf, "resp_rate=%d", le16_to_cpu(scan->rate)); iwe.u.data.length = strlen(buf); - current_ev = iwe_stream_add_point(current_ev, end_buf, &iwe, - buf); + current_ev = iwe_stream_add_point(info, current_ev, end_buf, + &iwe, buf); if (local->last_scan_type == PRISM2_HOSTSCAN && (capabilities & WLAN_CAPABILITY_IBSS)) { @@ -1940,8 +1942,8 @@ static char * __prism2_translate_scan(local_info_t *local, iwe.cmd = IWEVCUSTOM; sprintf(buf, "atim=%d", le16_to_cpu(scan->atim)); iwe.u.data.length = strlen(buf); - current_ev = iwe_stream_add_point(current_ev, end_buf, - &iwe, buf); + current_ev = iwe_stream_add_point(info, current_ev, + end_buf, &iwe, buf); } } kfree(buf); @@ -1950,16 +1952,16 @@ static char * __prism2_translate_scan(local_info_t *local, memset(&iwe, 0, sizeof(iwe)); iwe.cmd = IWEVGENIE; iwe.u.data.length = bss->wpa_ie_len; - current_ev = iwe_stream_add_point( - current_ev, end_buf, &iwe, bss->wpa_ie); + current_ev = iwe_stream_add_point(info, current_ev, end_buf, + &iwe, bss->wpa_ie); } if (bss && bss->rsn_ie_len > 0 && bss->rsn_ie_len <= MAX_WPA_IE_LEN) { memset(&iwe, 0, sizeof(iwe)); iwe.cmd = IWEVGENIE; iwe.u.data.length = bss->rsn_ie_len; - current_ev = iwe_stream_add_point( - current_ev, end_buf, &iwe, bss->rsn_ie); + current_ev = iwe_stream_add_point(info, current_ev, end_buf, + &iwe, bss->rsn_ie); } return current_ev; @@ -1969,6 +1971,7 @@ static char * __prism2_translate_scan(local_info_t *local, /* Translate scan data returned from the card to a card independant * format that the Wireless Tools will understand - Jean II */ static inline int prism2_translate_scan(local_info_t *local, + struct iw_request_info *info, char *buffer, int buflen) { struct hfa384x_hostscan_result *scan; @@ -1999,13 +2002,14 @@ static inline int prism2_translate_scan(local_info_t *local, if (memcmp(bss->bssid, scan->bssid, ETH_ALEN) == 0) { bss->included = 1; current_ev = __prism2_translate_scan( - local, scan, bss, current_ev, end_buf); + local, info, scan, bss, current_ev, + end_buf); found++; } } if (!found) { current_ev = __prism2_translate_scan( - local, scan, NULL, current_ev, end_buf); + local, info, scan, NULL, current_ev, end_buf); } /* Check if there is space for one more entry */ if ((end_buf - current_ev) <= IW_EV_ADDR_LEN) { @@ -2023,7 +2027,7 @@ static inline int prism2_translate_scan(local_info_t *local, bss = list_entry(ptr, struct hostap_bss_info, list); if (bss->included) continue; - current_ev = __prism2_translate_scan(local, NULL, bss, + current_ev = __prism2_translate_scan(local, info, NULL, bss, current_ev, end_buf); /* Check if there is space for one more entry */ if ((end_buf - current_ev) <= IW_EV_ADDR_LEN) { @@ -2070,7 +2074,7 @@ static inline int prism2_ioctl_giwscan_sta(struct net_device *dev, } local->scan_timestamp = 0; - res = prism2_translate_scan(local, extra, data->length); + res = prism2_translate_scan(local, info, extra, data->length); if (res >= 0) { data->length = res; @@ -2103,7 +2107,7 @@ static int prism2_ioctl_giwscan(struct net_device *dev, * Jean II */ /* Translate to WE format */ - res = prism2_ap_translate_scan(dev, extra); + res = prism2_ap_translate_scan(dev, info, extra); if (res >= 0) { printk(KERN_DEBUG "Scan result translation succeeded " "(length=%d)\n", res); diff --git a/drivers/net/wireless/libertas/scan.c b/drivers/net/wireless/libertas/scan.c index d448c9702a0..343ed38f772 100644 --- a/drivers/net/wireless/libertas/scan.c +++ b/drivers/net/wireless/libertas/scan.c @@ -776,8 +776,9 @@ out: #define MAX_CUSTOM_LEN 64 static inline char *lbs_translate_scan(struct lbs_private *priv, - char *start, char *stop, - struct bss_descriptor *bss) + struct iw_request_info *info, + char *start, char *stop, + struct bss_descriptor *bss) { struct chan_freq_power *cfp; char *current_val; /* For rates */ @@ -801,24 +802,24 @@ static inline char *lbs_translate_scan(struct lbs_private *priv, iwe.cmd = SIOCGIWAP; iwe.u.ap_addr.sa_family = ARPHRD_ETHER; memcpy(iwe.u.ap_addr.sa_data, &bss->bssid, ETH_ALEN); - start = iwe_stream_add_event(start, stop, &iwe, IW_EV_ADDR_LEN); + start = iwe_stream_add_event(info, start, stop, &iwe, IW_EV_ADDR_LEN); /* SSID */ iwe.cmd = SIOCGIWESSID; iwe.u.data.flags = 1; iwe.u.data.length = min((uint32_t) bss->ssid_len, (uint32_t) IW_ESSID_MAX_SIZE); - start = iwe_stream_add_point(start, stop, &iwe, bss->ssid); + start = iwe_stream_add_point(info, start, stop, &iwe, bss->ssid); /* Mode */ iwe.cmd = SIOCGIWMODE; iwe.u.mode = bss->mode; - start = iwe_stream_add_event(start, stop, &iwe, IW_EV_UINT_LEN); + start = iwe_stream_add_event(info, start, stop, &iwe, IW_EV_UINT_LEN); /* Frequency */ iwe.cmd = SIOCGIWFREQ; iwe.u.freq.m = (long)cfp->freq * 100000; iwe.u.freq.e = 1; - start = iwe_stream_add_event(start, stop, &iwe, IW_EV_FREQ_LEN); + start = iwe_stream_add_event(info, start, stop, &iwe, IW_EV_FREQ_LEN); /* Add quality statistics */ iwe.cmd = IWEVQUAL; @@ -852,7 +853,7 @@ static inline char *lbs_translate_scan(struct lbs_private *priv, nf = priv->NF[TYPE_RXPD][TYPE_AVG] / AVG_SCALE; iwe.u.qual.level = CAL_RSSI(snr, nf); } - start = iwe_stream_add_event(start, stop, &iwe, IW_EV_QUAL_LEN); + start = iwe_stream_add_event(info, start, stop, &iwe, IW_EV_QUAL_LEN); /* Add encryption capability */ iwe.cmd = SIOCGIWENCODE; @@ -862,9 +863,9 @@ static inline char *lbs_translate_scan(struct lbs_private *priv, iwe.u.data.flags = IW_ENCODE_DISABLED; } iwe.u.data.length = 0; - start = iwe_stream_add_point(start, stop, &iwe, bss->ssid); + start = iwe_stream_add_point(info, start, stop, &iwe, bss->ssid); - current_val = start + IW_EV_LCP_LEN; + current_val = start + iwe_stream_lcp_len(info); iwe.cmd = SIOCGIWRATE; iwe.u.bitrate.fixed = 0; @@ -874,19 +875,19 @@ static inline char *lbs_translate_scan(struct lbs_private *priv, for (j = 0; bss->rates[j] && (j < sizeof(bss->rates)); j++) { /* Bit rate given in 500 kb/s units */ iwe.u.bitrate.value = bss->rates[j] * 500000; - current_val = iwe_stream_add_value(start, current_val, - stop, &iwe, IW_EV_PARAM_LEN); + current_val = iwe_stream_add_value(info, start, current_val, + stop, &iwe, IW_EV_PARAM_LEN); } if ((bss->mode == IW_MODE_ADHOC) && priv->adhoccreate && !lbs_ssid_cmp(priv->curbssparams.ssid, priv->curbssparams.ssid_len, bss->ssid, bss->ssid_len)) { iwe.u.bitrate.value = 22 * 500000; - current_val = iwe_stream_add_value(start, current_val, + current_val = iwe_stream_add_value(info, start, current_val, stop, &iwe, IW_EV_PARAM_LEN); } /* Check if we added any event */ - if((current_val - start) > IW_EV_LCP_LEN) + if ((current_val - start) > iwe_stream_lcp_len(info)) start = current_val; memset(&iwe, 0, sizeof(iwe)); @@ -895,7 +896,7 @@ static inline char *lbs_translate_scan(struct lbs_private *priv, memcpy(buf, bss->wpa_ie, bss->wpa_ie_len); iwe.cmd = IWEVGENIE; iwe.u.data.length = bss->wpa_ie_len; - start = iwe_stream_add_point(start, stop, &iwe, buf); + start = iwe_stream_add_point(info, start, stop, &iwe, buf); } memset(&iwe, 0, sizeof(iwe)); @@ -904,7 +905,7 @@ static inline char *lbs_translate_scan(struct lbs_private *priv, memcpy(buf, bss->rsn_ie, bss->rsn_ie_len); iwe.cmd = IWEVGENIE; iwe.u.data.length = bss->rsn_ie_len; - start = iwe_stream_add_point(start, stop, &iwe, buf); + start = iwe_stream_add_point(info, start, stop, &iwe, buf); } if (bss->mesh) { @@ -915,7 +916,8 @@ static inline char *lbs_translate_scan(struct lbs_private *priv, p += snprintf(p, MAX_CUSTOM_LEN, "mesh-type: olpc"); iwe.u.data.length = p - custom; if (iwe.u.data.length) - start = iwe_stream_add_point(start, stop, &iwe, custom); + start = iwe_stream_add_point(info, start, stop, + &iwe, custom); } out: @@ -1036,7 +1038,7 @@ int lbs_get_scan(struct net_device *dev, struct iw_request_info *info, } /* Translate to WE format this entry */ - next_ev = lbs_translate_scan(priv, ev, stop, iter_bss); + next_ev = lbs_translate_scan(priv, info, ev, stop, iter_bss); if (next_ev == NULL) continue; ev = next_ev; diff --git a/drivers/net/wireless/orinoco.c b/drivers/net/wireless/orinoco.c index 6d13a0d15a0..b047306bf38 100644 --- a/drivers/net/wireless/orinoco.c +++ b/drivers/net/wireless/orinoco.c @@ -4046,6 +4046,7 @@ static int orinoco_ioctl_setscan(struct net_device *dev, * format that the Wireless Tools will understand - Jean II * Return message length or -errno for fatal errors */ static inline char *orinoco_translate_scan(struct net_device *dev, + struct iw_request_info *info, char *current_ev, char *end_buf, union hermes_scan_info *bss, @@ -4062,7 +4063,8 @@ static inline char *orinoco_translate_scan(struct net_device *dev, iwe.cmd = SIOCGIWAP; iwe.u.ap_addr.sa_family = ARPHRD_ETHER; memcpy(iwe.u.ap_addr.sa_data, bss->a.bssid, ETH_ALEN); - current_ev = iwe_stream_add_event(current_ev, end_buf, &iwe, IW_EV_ADDR_LEN); + current_ev = iwe_stream_add_event(info, current_ev, end_buf, + &iwe, IW_EV_ADDR_LEN); /* Other entries will be displayed in the order we give them */ @@ -4072,7 +4074,8 @@ static inline char *orinoco_translate_scan(struct net_device *dev, iwe.u.data.length = 32; iwe.cmd = SIOCGIWESSID; iwe.u.data.flags = 1; - current_ev = iwe_stream_add_point(current_ev, end_buf, &iwe, bss->a.essid); + current_ev = iwe_stream_add_point(info, current_ev, end_buf, + &iwe, bss->a.essid); /* Add mode */ iwe.cmd = SIOCGIWMODE; @@ -4082,7 +4085,8 @@ static inline char *orinoco_translate_scan(struct net_device *dev, iwe.u.mode = IW_MODE_MASTER; else iwe.u.mode = IW_MODE_ADHOC; - current_ev = iwe_stream_add_event(current_ev, end_buf, &iwe, IW_EV_UINT_LEN); + current_ev = iwe_stream_add_event(info, current_ev, end_buf, + &iwe, IW_EV_UINT_LEN); } channel = bss->s.channel; @@ -4091,7 +4095,7 @@ static inline char *orinoco_translate_scan(struct net_device *dev, iwe.cmd = SIOCGIWFREQ; iwe.u.freq.m = channel_frequency[channel-1] * 100000; iwe.u.freq.e = 1; - current_ev = iwe_stream_add_event(current_ev, end_buf, + current_ev = iwe_stream_add_event(info, current_ev, end_buf, &iwe, IW_EV_FREQ_LEN); } @@ -4106,7 +4110,8 @@ static inline char *orinoco_translate_scan(struct net_device *dev, iwe.u.qual.qual = iwe.u.qual.level - iwe.u.qual.noise; else iwe.u.qual.qual = 0; - current_ev = iwe_stream_add_event(current_ev, end_buf, &iwe, IW_EV_QUAL_LEN); + current_ev = iwe_stream_add_event(info, current_ev, end_buf, + &iwe, IW_EV_QUAL_LEN); /* Add encryption capability */ iwe.cmd = SIOCGIWENCODE; @@ -4115,7 +4120,8 @@ static inline char *orinoco_translate_scan(struct net_device *dev, else iwe.u.data.flags = IW_ENCODE_DISABLED; iwe.u.data.length = 0; - current_ev = iwe_stream_add_point(current_ev, end_buf, &iwe, bss->a.essid); + current_ev = iwe_stream_add_point(info, current_ev, end_buf, + &iwe, bss->a.essid); /* Add EXTRA: Age to display seconds since last beacon/probe response * for given network. */ @@ -4126,11 +4132,12 @@ static inline char *orinoco_translate_scan(struct net_device *dev, jiffies_to_msecs(jiffies - last_scanned)); iwe.u.data.length = p - custom; if (iwe.u.data.length) - current_ev = iwe_stream_add_point(current_ev, end_buf, &iwe, custom); + current_ev = iwe_stream_add_point(info, current_ev, end_buf, + &iwe, custom); /* Bit rate is not available in Lucent/Agere firmwares */ if (priv->firmware_type != FIRMWARE_TYPE_AGERE) { - char *current_val = current_ev + IW_EV_LCP_LEN; + char *current_val = current_ev + iwe_stream_lcp_len(info); int i; int step; @@ -4149,12 +4156,13 @@ static inline char *orinoco_translate_scan(struct net_device *dev, break; /* Bit rate given in 500 kb/s units (+ 0x80) */ iwe.u.bitrate.value = ((bss->p.rates[i] & 0x7f) * 500000); - current_val = iwe_stream_add_value(current_ev, current_val, + current_val = iwe_stream_add_value(info, current_ev, + current_val, end_buf, &iwe, IW_EV_PARAM_LEN); } /* Check if we added any event */ - if ((current_val - current_ev) > IW_EV_LCP_LEN) + if ((current_val - current_ev) > iwe_stream_lcp_len(info)) current_ev = current_val; } @@ -4190,7 +4198,7 @@ static int orinoco_ioctl_getscan(struct net_device *dev, list_for_each_entry(bss, &priv->bss_list, list) { /* Translate to WE format this entry */ - current_ev = orinoco_translate_scan(dev, current_ev, + current_ev = orinoco_translate_scan(dev, info, current_ev, extra + srq->length, &bss->bss, bss->last_scanned); diff --git a/drivers/net/wireless/prism54/isl_ioctl.c b/drivers/net/wireless/prism54/isl_ioctl.c index 5b375b28903..97fa14e0a47 100644 --- a/drivers/net/wireless/prism54/isl_ioctl.c +++ b/drivers/net/wireless/prism54/isl_ioctl.c @@ -571,8 +571,9 @@ prism54_set_scan(struct net_device *dev, struct iw_request_info *info, */ static char * -prism54_translate_bss(struct net_device *ndev, char *current_ev, - char *end_buf, struct obj_bss *bss, char noise) +prism54_translate_bss(struct net_device *ndev, struct iw_request_info *info, + char *current_ev, char *end_buf, struct obj_bss *bss, + char noise) { struct iw_event iwe; /* Temporary buffer */ short cap; @@ -584,8 +585,8 @@ prism54_translate_bss(struct net_device *ndev, char *current_ev, memcpy(iwe.u.ap_addr.sa_data, bss->address, 6); iwe.u.ap_addr.sa_family = ARPHRD_ETHER; iwe.cmd = SIOCGIWAP; - current_ev = - iwe_stream_add_event(current_ev, end_buf, &iwe, IW_EV_ADDR_LEN); + current_ev = iwe_stream_add_event(info, current_ev, end_buf, + &iwe, IW_EV_ADDR_LEN); /* The following entries will be displayed in the same order we give them */ @@ -593,7 +594,7 @@ prism54_translate_bss(struct net_device *ndev, char *current_ev, iwe.u.data.length = bss->ssid.length; iwe.u.data.flags = 1; iwe.cmd = SIOCGIWESSID; - current_ev = iwe_stream_add_point(current_ev, end_buf, + current_ev = iwe_stream_add_point(info, current_ev, end_buf, &iwe, bss->ssid.octets); /* Capabilities */ @@ -610,9 +611,8 @@ prism54_translate_bss(struct net_device *ndev, char *current_ev, iwe.u.mode = IW_MODE_ADHOC; iwe.cmd = SIOCGIWMODE; if (iwe.u.mode) - current_ev = - iwe_stream_add_event(current_ev, end_buf, &iwe, - IW_EV_UINT_LEN); + current_ev = iwe_stream_add_event(info, current_ev, end_buf, + &iwe, IW_EV_UINT_LEN); /* Encryption capability */ if (cap & CAP_CRYPT) @@ -621,14 +621,15 @@ prism54_translate_bss(struct net_device *ndev, char *current_ev, iwe.u.data.flags = IW_ENCODE_DISABLED; iwe.u.data.length = 0; iwe.cmd = SIOCGIWENCODE; - current_ev = iwe_stream_add_point(current_ev, end_buf, &iwe, NULL); + current_ev = iwe_stream_add_point(info, current_ev, end_buf, + &iwe, NULL); /* Add frequency. (short) bss->channel is the frequency in MHz */ iwe.u.freq.m = bss->channel; iwe.u.freq.e = 6; iwe.cmd = SIOCGIWFREQ; - current_ev = - iwe_stream_add_event(current_ev, end_buf, &iwe, IW_EV_FREQ_LEN); + current_ev = iwe_stream_add_event(info, current_ev, end_buf, + &iwe, IW_EV_FREQ_LEN); /* Add quality statistics */ iwe.u.qual.level = bss->rssi; @@ -636,20 +637,20 @@ prism54_translate_bss(struct net_device *ndev, char *current_ev, /* do a simple SNR for quality */ iwe.u.qual.qual = bss->rssi - noise; iwe.cmd = IWEVQUAL; - current_ev = - iwe_stream_add_event(current_ev, end_buf, &iwe, IW_EV_QUAL_LEN); + current_ev = iwe_stream_add_event(info, current_ev, end_buf, + &iwe, IW_EV_QUAL_LEN); /* Add WPA/RSN Information Element, if any */ wpa_ie_len = prism54_wpa_bss_ie_get(priv, bss->address, wpa_ie); if (wpa_ie_len > 0) { iwe.cmd = IWEVGENIE; iwe.u.data.length = min(wpa_ie_len, (size_t)MAX_WPA_IE_LEN); - current_ev = iwe_stream_add_point(current_ev, end_buf, - &iwe, wpa_ie); + current_ev = iwe_stream_add_point(info, current_ev, end_buf, + &iwe, wpa_ie); } /* Do the bitrates */ { - char * current_val = current_ev + IW_EV_LCP_LEN; + char *current_val = current_ev + iwe_stream_lcp_len(info); int i; int mask; @@ -662,14 +663,14 @@ prism54_translate_bss(struct net_device *ndev, char *current_ev, for(i = 0; i < sizeof(scan_rate_list); i++) { if(bss->rates & mask) { iwe.u.bitrate.value = (scan_rate_list[i] * 500000); - current_val = iwe_stream_add_value(current_ev, current_val, - end_buf, &iwe, - IW_EV_PARAM_LEN); + current_val = iwe_stream_add_value( + info, current_ev, current_val, + end_buf, &iwe, IW_EV_PARAM_LEN); } mask <<= 1; } /* Check if we added any event */ - if ((current_val - current_ev) > IW_EV_LCP_LEN) + if ((current_val - current_ev) > iwe_stream_lcp_len(info)) current_ev = current_val; } @@ -710,7 +711,7 @@ prism54_get_scan(struct net_device *ndev, struct iw_request_info *info, /* ok now, scan the list and translate its info */ for (i = 0; i < (int) bsslist->nr; i++) { - current_ev = prism54_translate_bss(ndev, current_ev, + current_ev = prism54_translate_bss(ndev, info, current_ev, extra + dwrq->length, &(bsslist->bsslist[i]), noise); @@ -2704,6 +2705,7 @@ prism2_ioctl_scan_req(struct net_device *ndev, struct prism2_hostapd_param *param) { islpci_private *priv = netdev_priv(ndev); + struct iw_request_info info; int i, rvalue; struct obj_bsslist *bsslist; u32 noise = 0; @@ -2727,9 +2729,12 @@ prism2_ioctl_scan_req(struct net_device *ndev, rvalue |= mgt_get_request(priv, DOT11_OID_BSSLIST, 0, NULL, &r); bsslist = r.ptr; + info.cmd = PRISM54_HOSTAPD; + info.flags = 0; + /* ok now, scan the list and translate its info */ for (i = 0; i < min(IW_MAX_AP, (int) bsslist->nr); i++) - current_ev = prism54_translate_bss(ndev, current_ev, + current_ev = prism54_translate_bss(ndev, &info, current_ev, extra + IW_SCAN_MAX_DATA, &(bsslist->bsslist[i]), noise); diff --git a/drivers/net/wireless/rndis_wlan.c b/drivers/net/wireless/rndis_wlan.c index a36d2c85e26..65c50025c88 100644 --- a/drivers/net/wireless/rndis_wlan.c +++ b/drivers/net/wireless/rndis_wlan.c @@ -1648,7 +1648,9 @@ static int rndis_iw_set_scan(struct net_device *dev, static char *rndis_translate_scan(struct net_device *dev, - char *cev, char *end_buf, struct ndis_80211_bssid_ex *bssid) + struct iw_request_info *info, char *cev, + char *end_buf, + struct ndis_80211_bssid_ex *bssid) { #ifdef DEBUG struct usbnet *usbdev = dev->priv; @@ -1667,14 +1669,14 @@ static char *rndis_translate_scan(struct net_device *dev, iwe.cmd = SIOCGIWAP; iwe.u.ap_addr.sa_family = ARPHRD_ETHER; memcpy(iwe.u.ap_addr.sa_data, bssid->mac, ETH_ALEN); - cev = iwe_stream_add_event(cev, end_buf, &iwe, IW_EV_ADDR_LEN); + cev = iwe_stream_add_event(info, cev, end_buf, &iwe, IW_EV_ADDR_LEN); devdbg(usbdev, "SSID(%d) %s", le32_to_cpu(bssid->ssid.length), bssid->ssid.essid); iwe.cmd = SIOCGIWESSID; iwe.u.essid.length = le32_to_cpu(bssid->ssid.length); iwe.u.essid.flags = 1; - cev = iwe_stream_add_point(cev, end_buf, &iwe, bssid->ssid.essid); + cev = iwe_stream_add_point(info, cev, end_buf, &iwe, bssid->ssid.essid); devdbg(usbdev, "MODE %d", le32_to_cpu(bssid->net_infra)); iwe.cmd = SIOCGIWMODE; @@ -1690,12 +1692,12 @@ static char *rndis_translate_scan(struct net_device *dev, iwe.u.mode = IW_MODE_AUTO; break; } - cev = iwe_stream_add_event(cev, end_buf, &iwe, IW_EV_UINT_LEN); + cev = iwe_stream_add_event(info, cev, end_buf, &iwe, IW_EV_UINT_LEN); devdbg(usbdev, "FREQ %d kHz", le32_to_cpu(bssid->config.ds_config)); iwe.cmd = SIOCGIWFREQ; dsconfig_to_freq(le32_to_cpu(bssid->config.ds_config), &iwe.u.freq); - cev = iwe_stream_add_event(cev, end_buf, &iwe, IW_EV_FREQ_LEN); + cev = iwe_stream_add_event(info, cev, end_buf, &iwe, IW_EV_FREQ_LEN); devdbg(usbdev, "QUAL %d", le32_to_cpu(bssid->rssi)); iwe.cmd = IWEVQUAL; @@ -1704,7 +1706,7 @@ static char *rndis_translate_scan(struct net_device *dev, iwe.u.qual.updated = IW_QUAL_QUAL_UPDATED | IW_QUAL_LEVEL_UPDATED | IW_QUAL_NOISE_INVALID; - cev = iwe_stream_add_event(cev, end_buf, &iwe, IW_EV_QUAL_LEN); + cev = iwe_stream_add_event(info, cev, end_buf, &iwe, IW_EV_QUAL_LEN); devdbg(usbdev, "ENCODE %d", le32_to_cpu(bssid->privacy)); iwe.cmd = SIOCGIWENCODE; @@ -1714,10 +1716,10 @@ static char *rndis_translate_scan(struct net_device *dev, else iwe.u.data.flags = IW_ENCODE_ENABLED | IW_ENCODE_NOKEY; - cev = iwe_stream_add_point(cev, end_buf, &iwe, NULL); + cev = iwe_stream_add_point(info, cev, end_buf, &iwe, NULL); devdbg(usbdev, "RATES:"); - current_val = cev + IW_EV_LCP_LEN; + current_val = cev + iwe_stream_lcp_len(info); iwe.cmd = SIOCGIWRATE; for (i = 0; i < sizeof(bssid->rates); i++) { if (bssid->rates[i] & 0x7f) { @@ -1725,13 +1727,13 @@ static char *rndis_translate_scan(struct net_device *dev, ((bssid->rates[i] & 0x7f) * 500000); devdbg(usbdev, " %d", iwe.u.bitrate.value); - current_val = iwe_stream_add_value(cev, + current_val = iwe_stream_add_value(info, cev, current_val, end_buf, &iwe, IW_EV_PARAM_LEN); } } - if ((current_val - cev) > IW_EV_LCP_LEN) + if ((current_val - cev) > iwe_stream_lcp_len(info)) cev = current_val; beacon = le32_to_cpu(bssid->config.beacon_period); @@ -1739,14 +1741,14 @@ static char *rndis_translate_scan(struct net_device *dev, iwe.cmd = IWEVCUSTOM; snprintf(sbuf, sizeof(sbuf), "bcn_int=%d", beacon); iwe.u.data.length = strlen(sbuf); - cev = iwe_stream_add_point(cev, end_buf, &iwe, sbuf); + cev = iwe_stream_add_point(info, cev, end_buf, &iwe, sbuf); atim = le32_to_cpu(bssid->config.atim_window); devdbg(usbdev, "ATIM %d", atim); iwe.cmd = IWEVCUSTOM; snprintf(sbuf, sizeof(sbuf), "atim=%u", atim); iwe.u.data.length = strlen(sbuf); - cev = iwe_stream_add_point(cev, end_buf, &iwe, sbuf); + cev = iwe_stream_add_point(info, cev, end_buf, &iwe, sbuf); ie = (void *)(bssid->ies + sizeof(struct ndis_80211_fixed_ies)); ie_len = min(bssid_len - (int)sizeof(*bssid), @@ -1760,7 +1762,7 @@ static char *rndis_translate_scan(struct net_device *dev, (ie->id == MFIE_TYPE_RSN) ? 2 : 1); iwe.cmd = IWEVGENIE; iwe.u.data.length = min(ie->len + 2, MAX_WPA_IE_LEN); - cev = iwe_stream_add_point(cev, end_buf, &iwe, + cev = iwe_stream_add_point(info, cev, end_buf, &iwe, (u8 *)ie); } @@ -1803,8 +1805,8 @@ static int rndis_iw_get_scan(struct net_device *dev, devdbg(usbdev, "SIOCGIWSCAN: %d BSSIDs found", count); while (count && ((void *)bssid + bssid_len) <= (buf + len)) { - cev = rndis_translate_scan(dev, cev, extra + IW_SCAN_MAX_DATA, - bssid); + cev = rndis_translate_scan(dev, info, cev, + extra + IW_SCAN_MAX_DATA, bssid); bssid = (void *)bssid + bssid_len; bssid_len = le32_to_cpu(bssid->length); count--; diff --git a/drivers/net/wireless/wl3501_cs.c b/drivers/net/wireless/wl3501_cs.c index 42a36b3f3ff..377141995e3 100644 --- a/drivers/net/wireless/wl3501_cs.c +++ b/drivers/net/wireless/wl3501_cs.c @@ -1624,25 +1624,25 @@ static int wl3501_get_scan(struct net_device *dev, struct iw_request_info *info, iwe.cmd = SIOCGIWAP; iwe.u.ap_addr.sa_family = ARPHRD_ETHER; memcpy(iwe.u.ap_addr.sa_data, this->bss_set[i].bssid, ETH_ALEN); - current_ev = iwe_stream_add_event(current_ev, + current_ev = iwe_stream_add_event(info, current_ev, extra + IW_SCAN_MAX_DATA, &iwe, IW_EV_ADDR_LEN); iwe.cmd = SIOCGIWESSID; iwe.u.data.flags = 1; iwe.u.data.length = this->bss_set[i].ssid.el.len; - current_ev = iwe_stream_add_point(current_ev, + current_ev = iwe_stream_add_point(info, current_ev, extra + IW_SCAN_MAX_DATA, &iwe, this->bss_set[i].ssid.essid); iwe.cmd = SIOCGIWMODE; iwe.u.mode = this->bss_set[i].bss_type; - current_ev = iwe_stream_add_event(current_ev, + current_ev = iwe_stream_add_event(info, current_ev, extra + IW_SCAN_MAX_DATA, &iwe, IW_EV_UINT_LEN); iwe.cmd = SIOCGIWFREQ; iwe.u.freq.m = this->bss_set[i].ds_pset.chan; iwe.u.freq.e = 0; - current_ev = iwe_stream_add_event(current_ev, + current_ev = iwe_stream_add_event(info, current_ev, extra + IW_SCAN_MAX_DATA, &iwe, IW_EV_FREQ_LEN); iwe.cmd = SIOCGIWENCODE; @@ -1651,7 +1651,7 @@ static int wl3501_get_scan(struct net_device *dev, struct iw_request_info *info, else iwe.u.data.flags = IW_ENCODE_DISABLED; iwe.u.data.length = 0; - current_ev = iwe_stream_add_point(current_ev, + current_ev = iwe_stream_add_point(info, current_ev, extra + IW_SCAN_MAX_DATA, &iwe, NULL); } diff --git a/drivers/net/wireless/zd1201.c b/drivers/net/wireless/zd1201.c index d5c0c66188c..07e4d1f7320 100644 --- a/drivers/net/wireless/zd1201.c +++ b/drivers/net/wireless/zd1201.c @@ -1152,32 +1152,36 @@ static int zd1201_get_scan(struct net_device *dev, iwe.cmd = SIOCGIWAP; iwe.u.ap_addr.sa_family = ARPHRD_ETHER; memcpy(iwe.u.ap_addr.sa_data, zd->rxdata+i+6, 6); - cev = iwe_stream_add_event(cev, end_buf, &iwe, IW_EV_ADDR_LEN); + cev = iwe_stream_add_event(info, cev, end_buf, + &iwe, IW_EV_ADDR_LEN); iwe.cmd = SIOCGIWESSID; iwe.u.data.length = zd->rxdata[i+16]; iwe.u.data.flags = 1; - cev = iwe_stream_add_point(cev, end_buf, &iwe, zd->rxdata+i+18); + cev = iwe_stream_add_point(info, cev, end_buf, + &iwe, zd->rxdata+i+18); iwe.cmd = SIOCGIWMODE; if (zd->rxdata[i+14]&0x01) iwe.u.mode = IW_MODE_MASTER; else iwe.u.mode = IW_MODE_ADHOC; - cev = iwe_stream_add_event(cev, end_buf, &iwe, IW_EV_UINT_LEN); + cev = iwe_stream_add_event(info, cev, end_buf, + &iwe, IW_EV_UINT_LEN); iwe.cmd = SIOCGIWFREQ; iwe.u.freq.m = zd->rxdata[i+0]; iwe.u.freq.e = 0; - cev = iwe_stream_add_event(cev, end_buf, &iwe, IW_EV_FREQ_LEN); + cev = iwe_stream_add_event(info, cev, end_buf, + &iwe, IW_EV_FREQ_LEN); iwe.cmd = SIOCGIWRATE; iwe.u.bitrate.fixed = 0; iwe.u.bitrate.disabled = 0; for (j=0; j<10; j++) if (zd->rxdata[i+50+j]) { iwe.u.bitrate.value = (zd->rxdata[i+50+j]&0x7f)*500000; - cev=iwe_stream_add_event(cev, end_buf, &iwe, - IW_EV_PARAM_LEN); + cev = iwe_stream_add_event(info, cev, end_buf, + &iwe, IW_EV_PARAM_LEN); } iwe.cmd = SIOCGIWENCODE; @@ -1186,14 +1190,15 @@ static int zd1201_get_scan(struct net_device *dev, iwe.u.data.flags = IW_ENCODE_ENABLED; else iwe.u.data.flags = IW_ENCODE_DISABLED; - cev = iwe_stream_add_point(cev, end_buf, &iwe, NULL); + cev = iwe_stream_add_point(info, cev, end_buf, &iwe, NULL); iwe.cmd = IWEVQUAL; iwe.u.qual.qual = zd->rxdata[i+4]; iwe.u.qual.noise= zd->rxdata[i+2]/10-100; iwe.u.qual.level = (256+zd->rxdata[i+4]*100)/255-100; iwe.u.qual.updated = 7; - cev = iwe_stream_add_event(cev, end_buf, &iwe, IW_EV_QUAL_LEN); + cev = iwe_stream_add_event(info, cev, end_buf, + &iwe, IW_EV_QUAL_LEN); } if (!enabled_save) -- cgit v1.2.3 From 94d9842403f770239a656586442454b7a8f2df29 Mon Sep 17 00:00:00 2001 From: Adrian Bunk Date: Thu, 5 Jun 2008 21:25:11 +0300 Subject: remove the strip driver The latest trace about usage of this driver I found was an (unanswered) request for help by a user trying to get it working reliably five years ago with kernel 2.4 . And even if it was still working the use cases of this driver (requiring both the hardware and someone providing this kind of wireless network) have become practically nonexisting. This patch therefore removes the strip driver. Signed-off-by: Adrian Bunk Signed-off-by: John W. Linville --- MAINTAINERS | 4 - drivers/net/wireless/Kconfig | 24 - drivers/net/wireless/Makefile | 1 - drivers/net/wireless/strip.c | 2804 ----------------------------------------- 4 files changed, 2833 deletions(-) delete mode 100644 drivers/net/wireless/strip.c (limited to 'drivers/net/wireless') diff --git a/MAINTAINERS b/MAINTAINERS index d0ea6ec2552..5ae19d502e0 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -3854,10 +3854,6 @@ P: Ion Badulescu M: ionut@cs.columbia.edu S: Maintained -STARMODE RADIO IP (STRIP) PROTOCOL DRIVER -W: http://mosquitonet.Stanford.EDU/strip.html -S: Unsupported ? - STRADIS MPEG-2 DECODER DRIVER P: Nathan Laredo M: laredo@gnu.org diff --git a/drivers/net/wireless/Kconfig b/drivers/net/wireless/Kconfig index 22e1e9a1fb7..865f2980c27 100644 --- a/drivers/net/wireless/Kconfig +++ b/drivers/net/wireless/Kconfig @@ -14,30 +14,6 @@ config WLAN_PRE80211 This option does not affect the kernel build, it only lets you choose drivers. -config STRIP - tristate "STRIP (Metricom starmode radio IP)" - depends on INET && WLAN_PRE80211 - select WIRELESS_EXT - ---help--- - Say Y if you have a Metricom radio and intend to use Starmode Radio - IP. STRIP is a radio protocol developed for the MosquitoNet project - (on the WWW at ) to send Internet - traffic using Metricom radios. Metricom radios are small, battery - powered, 100kbit/sec packet radio transceivers, about the size and - weight of a cellular telephone. (You may also have heard them called - "Metricom modems" but we avoid the term "modem" because it misleads - many people into thinking that you can plug a Metricom modem into a - phone line and use it as a modem.) - - You can use STRIP on any Linux machine with a serial port, although - it is obviously most useful for people with laptop computers. If you - think you might get a Metricom radio in the future, there is no harm - in saying Y to STRIP now, except that it makes the kernel a bit - bigger. - - To compile this as a module, choose M here: the module will be - called strip. - config ARLAN tristate "Aironet Arlan 655 & IC2200 DS support" depends on ISA && !64BIT && WLAN_PRE80211 diff --git a/drivers/net/wireless/Makefile b/drivers/net/wireless/Makefile index 54a4f6f1db6..2668934abbf 100644 --- a/drivers/net/wireless/Makefile +++ b/drivers/net/wireless/Makefile @@ -6,7 +6,6 @@ obj-$(CONFIG_IPW2100) += ipw2100.o obj-$(CONFIG_IPW2200) += ipw2200.o -obj-$(CONFIG_STRIP) += strip.o obj-$(CONFIG_ARLAN) += arlan.o arlan-objs := arlan-main.o arlan-proc.o diff --git a/drivers/net/wireless/strip.c b/drivers/net/wireless/strip.c deleted file mode 100644 index 883af891ebf..00000000000 --- a/drivers/net/wireless/strip.c +++ /dev/null @@ -1,2804 +0,0 @@ -/* - * Copyright 1996 The Board of Trustees of The Leland Stanford - * Junior University. All Rights Reserved. - * - * Permission to use, copy, modify, and distribute this - * software and its documentation for any purpose and without - * fee is hereby granted, provided that the above copyright - * notice appear in all copies. Stanford University - * makes no representations about the suitability of this - * software for any purpose. It is provided "as is" without - * express or implied warranty. - * - * strip.c This module implements Starmode Radio IP (STRIP) - * for kernel-based devices like TTY. It interfaces between a - * raw TTY, and the kernel's INET protocol layers (via DDI). - * - * Version: @(#)strip.c 1.3 July 1997 - * - * Author: Stuart Cheshire - * - * Fixes: v0.9 12th Feb 1996 (SC) - * New byte stuffing (2+6 run-length encoding) - * New watchdog timer task - * New Protocol key (SIP0) - * - * v0.9.1 3rd March 1996 (SC) - * Changed to dynamic device allocation -- no more compile - * time (or boot time) limit on the number of STRIP devices. - * - * v0.9.2 13th March 1996 (SC) - * Uses arp cache lookups (but doesn't send arp packets yet) - * - * v0.9.3 17th April 1996 (SC) - * Fixed bug where STR_ERROR flag was getting set unneccessarily - * (causing otherwise good packets to be unneccessarily dropped) - * - * v0.9.4 27th April 1996 (SC) - * First attempt at using "&COMMAND" Starmode AT commands - * - * v0.9.5 29th May 1996 (SC) - * First attempt at sending (unicast) ARP packets - * - * v0.9.6 5th June 1996 (Elliot) - * Put "message level" tags in every "printk" statement - * - * v0.9.7 13th June 1996 (laik) - * Added support for the /proc fs - * - * v0.9.8 July 1996 (Mema) - * Added packet logging - * - * v1.0 November 1996 (SC) - * Fixed (severe) memory leaks in the /proc fs code - * Fixed race conditions in the logging code - * - * v1.1 January 1997 (SC) - * Deleted packet logging (use tcpdump instead) - * Added support for Metricom Firmware v204 features - * (like message checksums) - * - * v1.2 January 1997 (SC) - * Put portables list back in - * - * v1.3 July 1997 (SC) - * Made STRIP driver set the radio's baud rate automatically. - * It is no longer necessarily to manually set the radio's - * rate permanently to 115200 -- the driver handles setting - * the rate automatically. - */ - -#ifdef MODULE -static const char StripVersion[] = "1.3A-STUART.CHESHIRE-MODULAR"; -#else -static const char StripVersion[] = "1.3A-STUART.CHESHIRE"; -#endif - -#define TICKLE_TIMERS 0 -#define EXT_COUNTERS 1 - - -/************************************************************************/ -/* Header files */ - -#include -#include -#include -#include -#include -#include - -# include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include - -#include -#include -#include -#include - -/************************************************************************/ -/* Useful structures and definitions */ - -/* - * A MetricomKey identifies the protocol being carried inside a Metricom - * Starmode packet. - */ - -typedef union { - __u8 c[4]; - __u32 l; -} MetricomKey; - -/* - * An IP address can be viewed as four bytes in memory (which is what it is) or as - * a single 32-bit long (which is convenient for assignment, equality testing etc.) - */ - -typedef union { - __u8 b[4]; - __u32 l; -} IPaddr; - -/* - * A MetricomAddressString is used to hold a printable representation of - * a Metricom address. - */ - -typedef struct { - __u8 c[24]; -} MetricomAddressString; - -/* Encapsulation can expand packet of size x to 65/64x + 1 - * Sent packet looks like "*
*" - * 1 1 1-18 1 4 ? 1 - * eg. *0000-1234*SIP0 - * We allow 31 bytes for the stars, the key, the address and the s - */ -#define STRIP_ENCAP_SIZE(X) (32 + (X)*65L/64L) - -/* - * A STRIP_Header is never really sent over the radio, but making a dummy - * header for internal use within the kernel that looks like an Ethernet - * header makes certain other software happier. For example, tcpdump - * already understands Ethernet headers. - */ - -typedef struct { - MetricomAddress dst_addr; /* Destination address, e.g. "0000-1234" */ - MetricomAddress src_addr; /* Source address, e.g. "0000-5678" */ - unsigned short protocol; /* The protocol type, using Ethernet codes */ -} STRIP_Header; - -typedef struct { - char c[60]; -} MetricomNode; - -#define NODE_TABLE_SIZE 32 -typedef struct { - struct timeval timestamp; - int num_nodes; - MetricomNode node[NODE_TABLE_SIZE]; -} MetricomNodeTable; - -enum { FALSE = 0, TRUE = 1 }; - -/* - * Holds the radio's firmware version. - */ -typedef struct { - char c[50]; -} FirmwareVersion; - -/* - * Holds the radio's serial number. - */ -typedef struct { - char c[18]; -} SerialNumber; - -/* - * Holds the radio's battery voltage. - */ -typedef struct { - char c[11]; -} BatteryVoltage; - -typedef struct { - char c[8]; -} char8; - -enum { - NoStructure = 0, /* Really old firmware */ - StructuredMessages = 1, /* Parsable AT response msgs */ - ChecksummedMessages = 2 /* Parsable AT response msgs with checksums */ -}; - -struct strip { - int magic; - /* - * These are pointers to the malloc()ed frame buffers. - */ - - unsigned char *rx_buff; /* buffer for received IP packet */ - unsigned char *sx_buff; /* buffer for received serial data */ - int sx_count; /* received serial data counter */ - int sx_size; /* Serial buffer size */ - unsigned char *tx_buff; /* transmitter buffer */ - unsigned char *tx_head; /* pointer to next byte to XMIT */ - int tx_left; /* bytes left in XMIT queue */ - int tx_size; /* Serial buffer size */ - - /* - * STRIP interface statistics. - */ - - unsigned long rx_packets; /* inbound frames counter */ - unsigned long tx_packets; /* outbound frames counter */ - unsigned long rx_errors; /* Parity, etc. errors */ - unsigned long tx_errors; /* Planned stuff */ - unsigned long rx_dropped; /* No memory for skb */ - unsigned long tx_dropped; /* When MTU change */ - unsigned long rx_over_errors; /* Frame bigger then STRIP buf. */ - - unsigned long pps_timer; /* Timer to determine pps */ - unsigned long rx_pps_count; /* Counter to determine pps */ - unsigned long tx_pps_count; /* Counter to determine pps */ - unsigned long sx_pps_count; /* Counter to determine pps */ - unsigned long rx_average_pps; /* rx packets per second * 8 */ - unsigned long tx_average_pps; /* tx packets per second * 8 */ - unsigned long sx_average_pps; /* sent packets per second * 8 */ - -#ifdef EXT_COUNTERS - unsigned long rx_bytes; /* total received bytes */ - unsigned long tx_bytes; /* total received bytes */ - unsigned long rx_rbytes; /* bytes thru radio i/f */ - unsigned long tx_rbytes; /* bytes thru radio i/f */ - unsigned long rx_sbytes; /* tot bytes thru serial i/f */ - unsigned long tx_sbytes; /* tot bytes thru serial i/f */ - unsigned long rx_ebytes; /* tot stat/err bytes */ - unsigned long tx_ebytes; /* tot stat/err bytes */ -#endif - - /* - * Internal variables. - */ - - struct list_head list; /* Linked list of devices */ - - int discard; /* Set if serial error */ - int working; /* Is radio working correctly? */ - int firmware_level; /* Message structuring level */ - int next_command; /* Next periodic command */ - unsigned int user_baud; /* The user-selected baud rate */ - int mtu; /* Our mtu (to spot changes!) */ - long watchdog_doprobe; /* Next time to test the radio */ - long watchdog_doreset; /* Time to do next reset */ - long gratuitous_arp; /* Time to send next ARP refresh */ - long arp_interval; /* Next ARP interval */ - struct timer_list idle_timer; /* For periodic wakeup calls */ - MetricomAddress true_dev_addr; /* True address of radio */ - int manual_dev_addr; /* Hack: See note below */ - - FirmwareVersion firmware_version; /* The radio's firmware version */ - SerialNumber serial_number; /* The radio's serial number */ - BatteryVoltage battery_voltage; /* The radio's battery voltage */ - - /* - * Other useful structures. - */ - - struct tty_struct *tty; /* ptr to TTY structure */ - struct net_device *dev; /* Our device structure */ - - /* - * Neighbour radio records - */ - - MetricomNodeTable portables; - MetricomNodeTable poletops; -}; - -/* - * Note: manual_dev_addr hack - * - * It is not possible to change the hardware address of a Metricom radio, - * or to send packets with a user-specified hardware source address, thus - * trying to manually set a hardware source address is a questionable - * thing to do. However, if the user *does* manually set the hardware - * source address of a STRIP interface, then the kernel will believe it, - * and use it in certain places. For example, the hardware address listed - * by ifconfig will be the manual address, not the true one. - * (Both addresses are listed in /proc/net/strip.) - * Also, ARP packets will be sent out giving the user-specified address as - * the source address, not the real address. This is dangerous, because - * it means you won't receive any replies -- the ARP replies will go to - * the specified address, which will be some other radio. The case where - * this is useful is when that other radio is also connected to the same - * machine. This allows you to connect a pair of radios to one machine, - * and to use one exclusively for inbound traffic, and the other - * exclusively for outbound traffic. Pretty neat, huh? - * - * Here's the full procedure to set this up: - * - * 1. "slattach" two interfaces, e.g. st0 for outgoing packets, - * and st1 for incoming packets - * - * 2. "ifconfig" st0 (outbound radio) to have the hardware address - * which is the real hardware address of st1 (inbound radio). - * Now when it sends out packets, it will masquerade as st1, and - * replies will be sent to that radio, which is exactly what we want. - * - * 3. Set the route table entry ("route add default ..." or - * "route add -net ...", as appropriate) to send packets via the st0 - * interface (outbound radio). Do not add any route which sends packets - * out via the st1 interface -- that radio is for inbound traffic only. - * - * 4. "ifconfig" st1 (inbound radio) to have hardware address zero. - * This tells the STRIP driver to "shut down" that interface and not - * send any packets through it. In particular, it stops sending the - * periodic gratuitous ARP packets that a STRIP interface normally sends. - * Also, when packets arrive on that interface, it will search the - * interface list to see if there is another interface who's manual - * hardware address matches its own real address (i.e. st0 in this - * example) and if so it will transfer ownership of the skbuff to - * that interface, so that it looks to the kernel as if the packet - * arrived on that interface. This is necessary because when the - * kernel sends an ARP packet on st0, it expects to get a reply on - * st0, and if it sees the reply come from st1 then it will ignore - * it (to be accurate, it puts the entry in the ARP table, but - * labelled in such a way that st0 can't use it). - * - * Thanks to Petros Maniatis for coming up with the idea of splitting - * inbound and outbound traffic between two interfaces, which turned - * out to be really easy to implement, even if it is a bit of a hack. - * - * Having set a manual address on an interface, you can restore it - * to automatic operation (where the address is automatically kept - * consistent with the real address of the radio) by setting a manual - * address of all ones, e.g. "ifconfig st0 hw strip FFFFFFFFFFFF" - * This 'turns off' manual override mode for the device address. - * - * Note: The IEEE 802 headers reported in tcpdump will show the *real* - * radio addresses the packets were sent and received from, so that you - * can see what is really going on with packets, and which interfaces - * they are really going through. - */ - - -/************************************************************************/ -/* Constants */ - -/* - * CommandString1 works on all radios - * Other CommandStrings are only used with firmware that provides structured responses. - * - * ats319=1 Enables Info message for node additions and deletions - * ats319=2 Enables Info message for a new best node - * ats319=4 Enables checksums - * ats319=8 Enables ACK messages - */ - -static const int MaxCommandStringLength = 32; -static const int CompatibilityCommand = 1; - -static const char CommandString0[] = "*&COMMAND*ATS319=7"; /* Turn on checksums & info messages */ -static const char CommandString1[] = "*&COMMAND*ATS305?"; /* Query radio name */ -static const char CommandString2[] = "*&COMMAND*ATS325?"; /* Query battery voltage */ -static const char CommandString3[] = "*&COMMAND*ATS300?"; /* Query version information */ -static const char CommandString4[] = "*&COMMAND*ATS311?"; /* Query poletop list */ -static const char CommandString5[] = "*&COMMAND*AT~LA"; /* Query portables list */ -typedef struct { - const char *string; - long length; -} StringDescriptor; - -static const StringDescriptor CommandString[] = { - {CommandString0, sizeof(CommandString0) - 1}, - {CommandString1, sizeof(CommandString1) - 1}, - {CommandString2, sizeof(CommandString2) - 1}, - {CommandString3, sizeof(CommandString3) - 1}, - {CommandString4, sizeof(CommandString4) - 1}, - {CommandString5, sizeof(CommandString5) - 1} -}; - -#define GOT_ALL_RADIO_INFO(S) \ - ((S)->firmware_version.c[0] && \ - (S)->battery_voltage.c[0] && \ - memcmp(&(S)->true_dev_addr, zero_address.c, sizeof(zero_address))) - -static const char hextable[16] = "0123456789ABCDEF"; - -static const MetricomAddress zero_address; -static const MetricomAddress broadcast_address = - { {0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF} }; - -static const MetricomKey SIP0Key = { "SIP0" }; -static const MetricomKey ARP0Key = { "ARP0" }; -static const MetricomKey ATR_Key = { "ATR " }; -static const MetricomKey ACK_Key = { "ACK_" }; -static const MetricomKey INF_Key = { "INF_" }; -static const MetricomKey ERR_Key = { "ERR_" }; - -static const long MaxARPInterval = 60 * HZ; /* One minute */ - -/* - * Maximum Starmode packet length is 1183 bytes. Allowing 4 bytes for - * protocol key, 4 bytes for checksum, one byte for CR, and 65/64 expansion - * for STRIP encoding, that translates to a maximum payload MTU of 1155. - * Note: A standard NFS 1K data packet is a total of 0x480 (1152) bytes - * long, including IP header, UDP header, and NFS header. Setting the STRIP - * MTU to 1152 allows us to send default sized NFS packets without fragmentation. - */ -static const unsigned short MAX_SEND_MTU = 1152; -static const unsigned short MAX_RECV_MTU = 1500; /* Hoping for Ethernet sized packets in the future! */ -static const unsigned short DEFAULT_STRIP_MTU = 1152; -static const int STRIP_MAGIC = 0x5303; -static const long LongTime = 0x7FFFFFFF; - -/************************************************************************/ -/* Global variables */ - -static LIST_HEAD(strip_list); -static DEFINE_SPINLOCK(strip_lock); - -/************************************************************************/ -/* Macros */ - -/* Returns TRUE if text T begins with prefix P */ -#define has_prefix(T,L,P) (((L) >= sizeof(P)-1) && !strncmp((T), (P), sizeof(P)-1)) - -/* Returns TRUE if text T of length L is equal to string S */ -#define text_equal(T,L,S) (((L) == sizeof(S)-1) && !strncmp((T), (S), sizeof(S)-1)) - -#define READHEX(X) ((X)>='0' && (X)<='9' ? (X)-'0' : \ - (X)>='a' && (X)<='f' ? (X)-'a'+10 : \ - (X)>='A' && (X)<='F' ? (X)-'A'+10 : 0 ) - -#define READHEX16(X) ((__u16)(READHEX(X))) - -#define READDEC(X) ((X)>='0' && (X)<='9' ? (X)-'0' : 0) - -#define ARRAY_END(X) (&((X)[ARRAY_SIZE(X)])) - -#define JIFFIE_TO_SEC(X) ((X) / HZ) - - -/************************************************************************/ -/* Utility routines */ - -static int arp_query(unsigned char *haddr, u32 paddr, - struct net_device *dev) -{ - struct neighbour *neighbor_entry; - int ret = 0; - - neighbor_entry = neigh_lookup(&arp_tbl, &paddr, dev); - - if (neighbor_entry != NULL) { - neighbor_entry->used = jiffies; - if (neighbor_entry->nud_state & NUD_VALID) { - memcpy(haddr, neighbor_entry->ha, dev->addr_len); - ret = 1; - } - neigh_release(neighbor_entry); - } - return ret; -} - -static void DumpData(char *msg, struct strip *strip_info, __u8 * ptr, - __u8 * end) -{ - static const int MAX_DumpData = 80; - __u8 pkt_text[MAX_DumpData], *p = pkt_text; - - *p++ = '\"'; - - while (ptr < end && p < &pkt_text[MAX_DumpData - 4]) { - if (*ptr == '\\') { - *p++ = '\\'; - *p++ = '\\'; - } else { - if (*ptr >= 32 && *ptr <= 126) { - *p++ = *ptr; - } else { - sprintf(p, "\\%02X", *ptr); - p += 3; - } - } - ptr++; - } - - if (ptr == end) - *p++ = '\"'; - *p++ = 0; - - printk(KERN_INFO "%s: %-13s%s\n", strip_info->dev->name, msg, pkt_text); -} - - -/************************************************************************/ -/* Byte stuffing/unstuffing routines */ - -/* Stuffing scheme: - * 00 Unused (reserved character) - * 01-3F Run of 2-64 different characters - * 40-7F Run of 1-64 different characters plus a single zero at the end - * 80-BF Run of 1-64 of the same character - * C0-FF Run of 1-64 zeroes (ASCII 0) - */ - -typedef enum { - Stuff_Diff = 0x00, - Stuff_DiffZero = 0x40, - Stuff_Same = 0x80, - Stuff_Zero = 0xC0, - Stuff_NoCode = 0xFF, /* Special code, meaning no code selected */ - - Stuff_CodeMask = 0xC0, - Stuff_CountMask = 0x3F, - Stuff_MaxCount = 0x3F, - Stuff_Magic = 0x0D /* The value we are eliminating */ -} StuffingCode; - -/* StuffData encodes the data starting at "src" for "length" bytes. - * It writes it to the buffer pointed to by "dst" (which must be at least - * as long as 1 + 65/64 of the input length). The output may be up to 1.6% - * larger than the input for pathological input, but will usually be smaller. - * StuffData returns the new value of the dst pointer as its result. - * "code_ptr_ptr" points to a "__u8 *" which is used to hold encoding state - * between calls, allowing an encoded packet to be incrementally built up - * from small parts. On the first call, the "__u8 *" pointed to should be - * initialized to NULL; between subsequent calls the calling routine should - * leave the value alone and simply pass it back unchanged so that the - * encoder can recover its current state. - */ - -#define StuffData_FinishBlock(X) \ -(*code_ptr = (X) ^ Stuff_Magic, code = Stuff_NoCode) - -static __u8 *StuffData(__u8 * src, __u32 length, __u8 * dst, - __u8 ** code_ptr_ptr) -{ - __u8 *end = src + length; - __u8 *code_ptr = *code_ptr_ptr; - __u8 code = Stuff_NoCode, count = 0; - - if (!length) - return (dst); - - if (code_ptr) { - /* - * Recover state from last call, if applicable - */ - code = (*code_ptr ^ Stuff_Magic) & Stuff_CodeMask; - count = (*code_ptr ^ Stuff_Magic) & Stuff_CountMask; - } - - while (src < end) { - switch (code) { - /* Stuff_NoCode: If no current code, select one */ - case Stuff_NoCode: - /* Record where we're going to put this code */ - code_ptr = dst++; - count = 0; /* Reset the count (zero means one instance) */ - /* Tentatively start a new block */ - if (*src == 0) { - code = Stuff_Zero; - src++; - } else { - code = Stuff_Same; - *dst++ = *src++ ^ Stuff_Magic; - } - /* Note: We optimistically assume run of same -- */ - /* which will be fixed later in Stuff_Same */ - /* if it turns out not to be true. */ - break; - - /* Stuff_Zero: We already have at least one zero encoded */ - case Stuff_Zero: - /* If another zero, count it, else finish this code block */ - if (*src == 0) { - count++; - src++; - } else { - StuffData_FinishBlock(Stuff_Zero + count); - } - break; - - /* Stuff_Same: We already have at least one byte encoded */ - case Stuff_Same: - /* If another one the same, count it */ - if ((*src ^ Stuff_Magic) == code_ptr[1]) { - count++; - src++; - break; - } - /* else, this byte does not match this block. */ - /* If we already have two or more bytes encoded, finish this code block */ - if (count) { - StuffData_FinishBlock(Stuff_Same + count); - break; - } - /* else, we only have one so far, so switch to Stuff_Diff code */ - code = Stuff_Diff; - /* and fall through to Stuff_Diff case below - * Note cunning cleverness here: case Stuff_Diff compares - * the current character with the previous two to see if it - * has a run of three the same. Won't this be an error if - * there aren't two previous characters stored to compare with? - * No. Because we know the current character is *not* the same - * as the previous one, the first test below will necessarily - * fail and the send half of the "if" won't be executed. - */ - - /* Stuff_Diff: We have at least two *different* bytes encoded */ - case Stuff_Diff: - /* If this is a zero, must encode a Stuff_DiffZero, and begin a new block */ - if (*src == 0) { - StuffData_FinishBlock(Stuff_DiffZero + - count); - } - /* else, if we have three in a row, it is worth starting a Stuff_Same block */ - else if ((*src ^ Stuff_Magic) == dst[-1] - && dst[-1] == dst[-2]) { - /* Back off the last two characters we encoded */ - code += count - 2; - /* Note: "Stuff_Diff + 0" is an illegal code */ - if (code == Stuff_Diff + 0) { - code = Stuff_Same + 0; - } - StuffData_FinishBlock(code); - code_ptr = dst - 2; - /* dst[-1] already holds the correct value */ - count = 2; /* 2 means three bytes encoded */ - code = Stuff_Same; - } - /* else, another different byte, so add it to the block */ - else { - *dst++ = *src ^ Stuff_Magic; - count++; - } - src++; /* Consume the byte */ - break; - } - if (count == Stuff_MaxCount) { - StuffData_FinishBlock(code + count); - } - } - if (code == Stuff_NoCode) { - *code_ptr_ptr = NULL; - } else { - *code_ptr_ptr = code_ptr; - StuffData_FinishBlock(code + count); - } - return (dst); -} - -/* - * UnStuffData decodes the data at "src", up to (but not including) "end". - * It writes the decoded data into the buffer pointed to by "dst", up to a - * maximum of "dst_length", and returns the new value of "src" so that a - * follow-on call can read more data, continuing from where the first left off. - * - * There are three types of results: - * 1. The source data runs out before extracting "dst_length" bytes: - * UnStuffData returns NULL to indicate failure. - * 2. The source data produces exactly "dst_length" bytes: - * UnStuffData returns new_src = end to indicate that all bytes were consumed. - * 3. "dst_length" bytes are extracted, with more remaining. - * UnStuffData returns new_src < end to indicate that there are more bytes - * to be read. - * - * Note: The decoding may be destructive, in that it may alter the source - * data in the process of decoding it (this is necessary to allow a follow-on - * call to resume correctly). - */ - -static __u8 *UnStuffData(__u8 * src, __u8 * end, __u8 * dst, - __u32 dst_length) -{ - __u8 *dst_end = dst + dst_length; - /* Sanity check */ - if (!src || !end || !dst || !dst_length) - return (NULL); - while (src < end && dst < dst_end) { - int count = (*src ^ Stuff_Magic) & Stuff_CountMask; - switch ((*src ^ Stuff_Magic) & Stuff_CodeMask) { - case Stuff_Diff: - if (src + 1 + count >= end) - return (NULL); - do { - *dst++ = *++src ^ Stuff_Magic; - } - while (--count >= 0 && dst < dst_end); - if (count < 0) - src += 1; - else { - if (count == 0) - *src = Stuff_Same ^ Stuff_Magic; - else - *src = - (Stuff_Diff + - count) ^ Stuff_Magic; - } - break; - case Stuff_DiffZero: - if (src + 1 + count >= end) - return (NULL); - do { - *dst++ = *++src ^ Stuff_Magic; - } - while (--count >= 0 && dst < dst_end); - if (count < 0) - *src = Stuff_Zero ^ Stuff_Magic; - else - *src = - (Stuff_DiffZero + count) ^ Stuff_Magic; - break; - case Stuff_Same: - if (src + 1 >= end) - return (NULL); - do { - *dst++ = src[1] ^ Stuff_Magic; - } - while (--count >= 0 && dst < dst_end); - if (count < 0) - src += 2; - else - *src = (Stuff_Same + count) ^ Stuff_Magic; - break; - case Stuff_Zero: - do { - *dst++ = 0; - } - while (--count >= 0 && dst < dst_end); - if (count < 0) - src += 1; - else - *src = (Stuff_Zero + count) ^ Stuff_Magic; - break; - } - } - if (dst < dst_end) - return (NULL); - else - return (src); -} - - -/************************************************************************/ -/* General routines for STRIP */ - -/* - * set_baud sets the baud rate to the rate defined by baudcode - */ -static void set_baud(struct tty_struct *tty, speed_t baudrate) -{ - struct ktermios old_termios; - - mutex_lock(&tty->termios_mutex); - old_termios =*(tty->termios); - tty_encode_baud_rate(tty, baudrate, baudrate); - tty->ops->set_termios(tty, &old_termios); - mutex_unlock(&tty->termios_mutex); -} - -/* - * Convert a string to a Metricom Address. - */ - -#define IS_RADIO_ADDRESS(p) ( \ - isdigit((p)[0]) && isdigit((p)[1]) && isdigit((p)[2]) && isdigit((p)[3]) && \ - (p)[4] == '-' && \ - isdigit((p)[5]) && isdigit((p)[6]) && isdigit((p)[7]) && isdigit((p)[8]) ) - -static int string_to_radio_address(MetricomAddress * addr, __u8 * p) -{ - if (!IS_RADIO_ADDRESS(p)) - return (1); - addr->c[0] = 0; - addr->c[1] = 0; - addr->c[2] = READHEX(p[0]) << 4 | READHEX(p[1]); - addr->c[3] = READHEX(p[2]) << 4 | READHEX(p[3]); - addr->c[4] = READHEX(p[5]) << 4 | READHEX(p[6]); - addr->c[5] = READHEX(p[7]) << 4 | READHEX(p[8]); - return (0); -} - -/* - * Convert a Metricom Address to a string. - */ - -static __u8 *radio_address_to_string(const MetricomAddress * addr, - MetricomAddressString * p) -{ - sprintf(p->c, "%02X%02X-%02X%02X", addr->c[2], addr->c[3], - addr->c[4], addr->c[5]); - return (p->c); -} - -/* - * Note: Must make sure sx_size is big enough to receive a stuffed - * MAX_RECV_MTU packet. Additionally, we also want to ensure that it's - * big enough to receive a large radio neighbour list (currently 4K). - */ - -static int allocate_buffers(struct strip *strip_info, int mtu) -{ - struct net_device *dev = strip_info->dev; - int sx_size = max_t(int, STRIP_ENCAP_SIZE(MAX_RECV_MTU), 4096); - int tx_size = STRIP_ENCAP_SIZE(mtu) + MaxCommandStringLength; - __u8 *r = kmalloc(MAX_RECV_MTU, GFP_ATOMIC); - __u8 *s = kmalloc(sx_size, GFP_ATOMIC); - __u8 *t = kmalloc(tx_size, GFP_ATOMIC); - if (r && s && t) { - strip_info->rx_buff = r; - strip_info->sx_buff = s; - strip_info->tx_buff = t; - strip_info->sx_size = sx_size; - strip_info->tx_size = tx_size; - strip_info->mtu = dev->mtu = mtu; - return (1); - } - kfree(r); - kfree(s); - kfree(t); - return (0); -} - -/* - * MTU has been changed by the IP layer. - * We could be in - * an upcall from the tty driver, or in an ip packet queue. - */ -static int strip_change_mtu(struct net_device *dev, int new_mtu) -{ - struct strip *strip_info = netdev_priv(dev); - int old_mtu = strip_info->mtu; - unsigned char *orbuff = strip_info->rx_buff; - unsigned char *osbuff = strip_info->sx_buff; - unsigned char *otbuff = strip_info->tx_buff; - - if (new_mtu > MAX_SEND_MTU) { - printk(KERN_ERR - "%s: MTU exceeds maximum allowable (%d), MTU change cancelled.\n", - strip_info->dev->name, MAX_SEND_MTU); - return -EINVAL; - } - - spin_lock_bh(&strip_lock); - if (!allocate_buffers(strip_info, new_mtu)) { - printk(KERN_ERR "%s: unable to grow strip buffers, MTU change cancelled.\n", - strip_info->dev->name); - spin_unlock_bh(&strip_lock); - return -ENOMEM; - } - - if (strip_info->sx_count) { - if (strip_info->sx_count <= strip_info->sx_size) - memcpy(strip_info->sx_buff, osbuff, - strip_info->sx_count); - else { - strip_info->discard = strip_info->sx_count; - strip_info->rx_over_errors++; - } - } - - if (strip_info->tx_left) { - if (strip_info->tx_left <= strip_info->tx_size) - memcpy(strip_info->tx_buff, strip_info->tx_head, - strip_info->tx_left); - else { - strip_info->tx_left = 0; - strip_info->tx_dropped++; - } - } - strip_info->tx_head = strip_info->tx_buff; - spin_unlock_bh(&strip_lock); - - printk(KERN_NOTICE "%s: strip MTU changed fom %d to %d.\n", - strip_info->dev->name, old_mtu, strip_info->mtu); - - kfree(orbuff); - kfree(osbuff); - kfree(otbuff); - return 0; -} - -static void strip_unlock(struct strip *strip_info) -{ - /* - * Set the timer to go off in one second. - */ - strip_info->idle_timer.expires = jiffies + 1 * HZ; - add_timer(&strip_info->idle_timer); - netif_wake_queue(strip_info->dev); -} - - - -/* - * If the time is in the near future, time_delta prints the number of - * seconds to go into the buffer and returns the address of the buffer. - * If the time is not in the near future, it returns the address of the - * string "Not scheduled" The buffer must be long enough to contain the - * ascii representation of the number plus 9 charactes for the " seconds" - * and the null character. - */ -#ifdef CONFIG_PROC_FS -static char *time_delta(char buffer[], long time) -{ - time -= jiffies; - if (time > LongTime / 2) - return ("Not scheduled"); - if (time < 0) - time = 0; /* Don't print negative times */ - sprintf(buffer, "%ld seconds", time / HZ); - return (buffer); -} - -/* get Nth element of the linked list */ -static struct strip *strip_get_idx(loff_t pos) -{ - struct strip *str; - int i = 0; - - list_for_each_entry_rcu(str, &strip_list, list) { - if (pos == i) - return str; - ++i; - } - return NULL; -} - -static void *strip_seq_start(struct seq_file *seq, loff_t *pos) -{ - rcu_read_lock(); - return *pos ? strip_get_idx(*pos - 1) : SEQ_START_TOKEN; -} - -static void *strip_seq_next(struct seq_file *seq, void *v, loff_t *pos) -{ - struct list_head *l; - struct strip *s; - - ++*pos; - if (v == SEQ_START_TOKEN) - return strip_get_idx(1); - - s = v; - l = &s->list; - list_for_each_continue_rcu(l, &strip_list) { - return list_entry(l, struct strip, list); - } - return NULL; -} - -static void strip_seq_stop(struct seq_file *seq, void *v) -{ - rcu_read_unlock(); -} - -static void strip_seq_neighbours(struct seq_file *seq, - const MetricomNodeTable * table, - const char *title) -{ - /* We wrap this in a do/while loop, so if the table changes */ - /* while we're reading it, we just go around and try again. */ - struct timeval t; - - do { - int i; - t = table->timestamp; - if (table->num_nodes) - seq_printf(seq, "\n %s\n", title); - for (i = 0; i < table->num_nodes; i++) { - MetricomNode node; - - spin_lock_bh(&strip_lock); - node = table->node[i]; - spin_unlock_bh(&strip_lock); - seq_printf(seq, " %s\n", node.c); - } - } while (table->timestamp.tv_sec != t.tv_sec - || table->timestamp.tv_usec != t.tv_usec); -} - -/* - * This function prints radio status information via the seq_file - * interface. The interface takes care of buffer size and over - * run issues. - * - * The buffer in seq_file is PAGESIZE (4K) - * so this routine should never print more or it will get truncated. - * With the maximum of 32 portables and 32 poletops - * reported, the routine outputs 3107 bytes into the buffer. - */ -static void strip_seq_status_info(struct seq_file *seq, - const struct strip *strip_info) -{ - char temp[32]; - MetricomAddressString addr_string; - - /* First, we must copy all of our data to a safe place, */ - /* in case a serial interrupt comes in and changes it. */ - int tx_left = strip_info->tx_left; - unsigned long rx_average_pps = strip_info->rx_average_pps; - unsigned long tx_average_pps = strip_info->tx_average_pps; - unsigned long sx_average_pps = strip_info->sx_average_pps; - int working = strip_info->working; - int firmware_level = strip_info->firmware_level; - long watchdog_doprobe = strip_info->watchdog_doprobe; - long watchdog_doreset = strip_info->watchdog_doreset; - long gratuitous_arp = strip_info->gratuitous_arp; - long arp_interval = strip_info->arp_interval; - FirmwareVersion firmware_version = strip_info->firmware_version; - SerialNumber serial_number = strip_info->serial_number; - BatteryVoltage battery_voltage = strip_info->battery_voltage; - char *if_name = strip_info->dev->name; - MetricomAddress true_dev_addr = strip_info->true_dev_addr; - MetricomAddress dev_dev_addr = - *(MetricomAddress *) strip_info->dev->dev_addr; - int manual_dev_addr = strip_info->manual_dev_addr; -#ifdef EXT_COUNTERS - unsigned long rx_bytes = strip_info->rx_bytes; - unsigned long tx_bytes = strip_info->tx_bytes; - unsigned long rx_rbytes = strip_info->rx_rbytes; - unsigned long tx_rbytes = strip_info->tx_rbytes; - unsigned long rx_sbytes = strip_info->rx_sbytes; - unsigned long tx_sbytes = strip_info->tx_sbytes; - unsigned long rx_ebytes = strip_info->rx_ebytes; - unsigned long tx_ebytes = strip_info->tx_ebytes; -#endif - - seq_printf(seq, "\nInterface name\t\t%s\n", if_name); - seq_printf(seq, " Radio working:\t\t%s\n", working ? "Yes" : "No"); - radio_address_to_string(&true_dev_addr, &addr_string); - seq_printf(seq, " Radio address:\t\t%s\n", addr_string.c); - if (manual_dev_addr) { - radio_address_to_string(&dev_dev_addr, &addr_string); - seq_printf(seq, " Device address:\t%s\n", addr_string.c); - } - seq_printf(seq, " Firmware version:\t%s", !working ? "Unknown" : - !firmware_level ? "Should be upgraded" : - firmware_version.c); - if (firmware_level >= ChecksummedMessages) - seq_printf(seq, " (Checksums Enabled)"); - seq_printf(seq, "\n"); - seq_printf(seq, " Serial number:\t\t%s\n", serial_number.c); - seq_printf(seq, " Battery voltage:\t%s\n", battery_voltage.c); - seq_printf(seq, " Transmit queue (bytes):%d\n", tx_left); - seq_printf(seq, " Receive packet rate: %ld packets per second\n", - rx_average_pps / 8); - seq_printf(seq, " Transmit packet rate: %ld packets per second\n", - tx_average_pps / 8); - seq_printf(seq, " Sent packet rate: %ld packets per second\n", - sx_average_pps / 8); - seq_printf(seq, " Next watchdog probe:\t%s\n", - time_delta(temp, watchdog_doprobe)); - seq_printf(seq, " Next watchdog reset:\t%s\n", - time_delta(temp, watchdog_doreset)); - seq_printf(seq, " Next gratuitous ARP:\t"); - - if (!memcmp - (strip_info->dev->dev_addr, zero_address.c, - sizeof(zero_address))) - seq_printf(seq, "Disabled\n"); - else { - seq_printf(seq, "%s\n", time_delta(temp, gratuitous_arp)); - seq_printf(seq, " Next ARP interval:\t%ld seconds\n", - JIFFIE_TO_SEC(arp_interval)); - } - - if (working) { -#ifdef EXT_COUNTERS - seq_printf(seq, "\n"); - seq_printf(seq, - " Total bytes: \trx:\t%lu\ttx:\t%lu\n", - rx_bytes, tx_bytes); - seq_printf(seq, - " thru radio: \trx:\t%lu\ttx:\t%lu\n", - rx_rbytes, tx_rbytes); - seq_printf(seq, - " thru serial port: \trx:\t%lu\ttx:\t%lu\n", - rx_sbytes, tx_sbytes); - seq_printf(seq, - " Total stat/err bytes:\trx:\t%lu\ttx:\t%lu\n", - rx_ebytes, tx_ebytes); -#endif - strip_seq_neighbours(seq, &strip_info->poletops, - "Poletops:"); - strip_seq_neighbours(seq, &strip_info->portables, - "Portables:"); - } -} - -/* - * This function is exports status information from the STRIP driver through - * the /proc file system. - */ -static int strip_seq_show(struct seq_file *seq, void *v) -{ - if (v == SEQ_START_TOKEN) - seq_printf(seq, "strip_version: %s\n", StripVersion); - else - strip_seq_status_info(seq, (const struct strip *)v); - return 0; -} - - -static struct seq_operations strip_seq_ops = { - .start = strip_seq_start, - .next = strip_seq_next, - .stop = strip_seq_stop, - .show = strip_seq_show, -}; - -static int strip_seq_open(struct inode *inode, struct file *file) -{ - return seq_open(file, &strip_seq_ops); -} - -static const struct file_operations strip_seq_fops = { - .owner = THIS_MODULE, - .open = strip_seq_open, - .read = seq_read, - .llseek = seq_lseek, - .release = seq_release, -}; -#endif - - - -/************************************************************************/ -/* Sending routines */ - -static void ResetRadio(struct strip *strip_info) -{ - struct tty_struct *tty = strip_info->tty; - static const char init[] = "ate0q1dt**starmode\r**"; - StringDescriptor s = { init, sizeof(init) - 1 }; - - /* - * If the radio isn't working anymore, - * we should clear the old status information. - */ - if (strip_info->working) { - printk(KERN_INFO "%s: No response: Resetting radio.\n", - strip_info->dev->name); - strip_info->firmware_version.c[0] = '\0'; - strip_info->serial_number.c[0] = '\0'; - strip_info->battery_voltage.c[0] = '\0'; - strip_info->portables.num_nodes = 0; - do_gettimeofday(&strip_info->portables.timestamp); - strip_info->poletops.num_nodes = 0; - do_gettimeofday(&strip_info->poletops.timestamp); - } - - strip_info->pps_timer = jiffies; - strip_info->rx_pps_count = 0; - strip_info->tx_pps_count = 0; - strip_info->sx_pps_count = 0; - strip_info->rx_average_pps = 0; - strip_info->tx_average_pps = 0; - strip_info->sx_average_pps = 0; - - /* Mark radio address as unknown */ - *(MetricomAddress *) & strip_info->true_dev_addr = zero_address; - if (!strip_info->manual_dev_addr) - *(MetricomAddress *) strip_info->dev->dev_addr = - zero_address; - strip_info->working = FALSE; - strip_info->firmware_level = NoStructure; - strip_info->next_command = CompatibilityCommand; - strip_info->watchdog_doprobe = jiffies + 10 * HZ; - strip_info->watchdog_doreset = jiffies + 1 * HZ; - - /* If the user has selected a baud rate above 38.4 see what magic we have to do */ - if (strip_info->user_baud > 38400) { - /* - * Subtle stuff: Pay attention :-) - * If the serial port is currently at the user's selected (>38.4) rate, - * then we temporarily switch to 19.2 and issue the ATS304 command - * to tell the radio to switch to the user's selected rate. - * If the serial port is not currently at that rate, that means we just - * issued the ATS304 command last time through, so this time we restore - * the user's selected rate and issue the normal starmode reset string. - */ - if (strip_info->user_baud == tty_get_baud_rate(tty)) { - static const char b0[] = "ate0q1s304=57600\r"; - static const char b1[] = "ate0q1s304=115200\r"; - static const StringDescriptor baudstring[2] = - { {b0, sizeof(b0) - 1} - , {b1, sizeof(b1) - 1} - }; - set_baud(tty, 19200); - if (strip_info->user_baud == 57600) - s = baudstring[0]; - else if (strip_info->user_baud == 115200) - s = baudstring[1]; - else - s = baudstring[1]; /* For now */ - } else - set_baud(tty, strip_info->user_baud); - } - - tty->ops->write(tty, s.string, s.length); -#ifdef EXT_COUNTERS - strip_info->tx_ebytes += s.length; -#endif -} - -/* - * Called by the driver when there's room for more data. If we have - * more packets to send, we send them here. - */ - -static void strip_write_some_more(struct tty_struct *tty) -{ - struct strip *strip_info = (struct strip *) tty->disc_data; - - /* First make sure we're connected. */ - if (!strip_info || strip_info->magic != STRIP_MAGIC || - !netif_running(strip_info->dev)) - return; - - if (strip_info->tx_left > 0) { - int num_written = - tty->ops->write(tty, strip_info->tx_head, - strip_info->tx_left); - strip_info->tx_left -= num_written; - strip_info->tx_head += num_written; -#ifdef EXT_COUNTERS - strip_info->tx_sbytes += num_written; -#endif - } else { /* Else start transmission of another packet */ - - tty->flags &= ~(1 << TTY_DO_WRITE_WAKEUP); - strip_unlock(strip_info); - } -} - -static __u8 *add_checksum(__u8 * buffer, __u8 * end) -{ - __u16 sum = 0; - __u8 *p = buffer; - while (p < end) - sum += *p++; - end[3] = hextable[sum & 0xF]; - sum >>= 4; - end[2] = hextable[sum & 0xF]; - sum >>= 4; - end[1] = hextable[sum & 0xF]; - sum >>= 4; - end[0] = hextable[sum & 0xF]; - return (end + 4); -} - -static unsigned char *strip_make_packet(unsigned char *buffer, - struct strip *strip_info, - struct sk_buff *skb) -{ - __u8 *ptr = buffer; - __u8 *stuffstate = NULL; - STRIP_Header *header = (STRIP_Header *) skb->data; - MetricomAddress haddr = header->dst_addr; - int len = skb->len - sizeof(STRIP_Header); - MetricomKey key; - - /*HexDump("strip_make_packet", strip_info, skb->data, skb->data + skb->len); */ - - if (header->protocol == htons(ETH_P_IP)) - key = SIP0Key; - else if (header->protocol == htons(ETH_P_ARP)) - key = ARP0Key; - else { - printk(KERN_ERR - "%s: strip_make_packet: Unknown packet type 0x%04X\n", - strip_info->dev->name, ntohs(header->protocol)); - return (NULL); - } - - if (len > strip_info->mtu) { - printk(KERN_ERR - "%s: Dropping oversized transmit packet: %d bytes\n", - strip_info->dev->name, len); - return (NULL); - } - - /* - * If we're sending to ourselves, discard the packet. - * (Metricom radios choke if they try to send a packet to their own address.) - */ - if (!memcmp(haddr.c, strip_info->true_dev_addr.c, sizeof(haddr))) { - printk(KERN_ERR "%s: Dropping packet addressed to self\n", - strip_info->dev->name); - return (NULL); - } - - /* - * If this is a broadcast packet, send it to our designated Metricom - * 'broadcast hub' radio (First byte of address being 0xFF means broadcast) - */ - if (haddr.c[0] == 0xFF) { - __be32 brd = 0; - struct in_device *in_dev; - - rcu_read_lock(); - in_dev = __in_dev_get_rcu(strip_info->dev); - if (in_dev == NULL) { - rcu_read_unlock(); - return NULL; - } - if (in_dev->ifa_list) - brd = in_dev->ifa_list->ifa_broadcast; - rcu_read_unlock(); - - /* arp_query returns 1 if it succeeds in looking up the address, 0 if it fails */ - if (!arp_query(haddr.c, brd, strip_info->dev)) { - printk(KERN_ERR - "%s: Unable to send packet (no broadcast hub configured)\n", - strip_info->dev->name); - return (NULL); - } - /* - * If we are the broadcast hub, don't bother sending to ourselves. - * (Metricom radios choke if they try to send a packet to their own address.) - */ - if (!memcmp - (haddr.c, strip_info->true_dev_addr.c, sizeof(haddr))) - return (NULL); - } - - *ptr++ = 0x0D; - *ptr++ = '*'; - *ptr++ = hextable[haddr.c[2] >> 4]; - *ptr++ = hextable[haddr.c[2] & 0xF]; - *ptr++ = hextable[haddr.c[3] >> 4]; - *ptr++ = hextable[haddr.c[3] & 0xF]; - *ptr++ = '-'; - *ptr++ = hextable[haddr.c[4] >> 4]; - *ptr++ = hextable[haddr.c[4] & 0xF]; - *ptr++ = hextable[haddr.c[5] >> 4]; - *ptr++ = hextable[haddr.c[5] & 0xF]; - *ptr++ = '*'; - *ptr++ = key.c[0]; - *ptr++ = key.c[1]; - *ptr++ = key.c[2]; - *ptr++ = key.c[3]; - - ptr = - StuffData(skb->data + sizeof(STRIP_Header), len, ptr, - &stuffstate); - - if (strip_info->firmware_level >= ChecksummedMessages) - ptr = add_checksum(buffer + 1, ptr); - - *ptr++ = 0x0D; - return (ptr); -} - -static void strip_send(struct strip *strip_info, struct sk_buff *skb) -{ - MetricomAddress haddr; - unsigned char *ptr = strip_info->tx_buff; - int doreset = (long) jiffies - strip_info->watchdog_doreset >= 0; - int doprobe = (long) jiffies - strip_info->watchdog_doprobe >= 0 - && !doreset; - __be32 addr, brd; - - /* - * 1. If we have a packet, encapsulate it and put it in the buffer - */ - if (skb) { - char *newptr = strip_make_packet(ptr, strip_info, skb); - strip_info->tx_pps_count++; - if (!newptr) - strip_info->tx_dropped++; - else { - ptr = newptr; - strip_info->sx_pps_count++; - strip_info->tx_packets++; /* Count another successful packet */ -#ifdef EXT_COUNTERS - strip_info->tx_bytes += skb->len; - strip_info->tx_rbytes += ptr - strip_info->tx_buff; -#endif - /*DumpData("Sending:", strip_info, strip_info->tx_buff, ptr); */ - /*HexDump("Sending", strip_info, strip_info->tx_buff, ptr); */ - } - } - - /* - * 2. If it is time for another tickle, tack it on, after the packet - */ - if (doprobe) { - StringDescriptor ts = CommandString[strip_info->next_command]; -#if TICKLE_TIMERS - { - struct timeval tv; - do_gettimeofday(&tv); - printk(KERN_INFO "**** Sending tickle string %d at %02d.%06d\n", - strip_info->next_command, tv.tv_sec % 100, - tv.tv_usec); - } -#endif - if (ptr == strip_info->tx_buff) - *ptr++ = 0x0D; - - *ptr++ = '*'; /* First send "**" to provoke an error message */ - *ptr++ = '*'; - - /* Then add the command */ - memcpy(ptr, ts.string, ts.length); - - /* Add a checksum ? */ - if (strip_info->firmware_level < ChecksummedMessages) - ptr += ts.length; - else - ptr = add_checksum(ptr, ptr + ts.length); - - *ptr++ = 0x0D; /* Terminate the command with a */ - - /* Cycle to next periodic command? */ - if (strip_info->firmware_level >= StructuredMessages) - if (++strip_info->next_command >= - ARRAY_SIZE(CommandString)) - strip_info->next_command = 0; -#ifdef EXT_COUNTERS - strip_info->tx_ebytes += ts.length; -#endif - strip_info->watchdog_doprobe = jiffies + 10 * HZ; - strip_info->watchdog_doreset = jiffies + 1 * HZ; - /*printk(KERN_INFO "%s: Routine radio test.\n", strip_info->dev->name); */ - } - - /* - * 3. Set up the strip_info ready to send the data (if any). - */ - strip_info->tx_head = strip_info->tx_buff; - strip_info->tx_left = ptr - strip_info->tx_buff; - strip_info->tty->flags |= (1 << TTY_DO_WRITE_WAKEUP); - - /* - * 4. Debugging check to make sure we're not overflowing the buffer. - */ - if (strip_info->tx_size - strip_info->tx_left < 20) - printk(KERN_ERR "%s: Sending%5d bytes;%5d bytes free.\n", - strip_info->dev->name, strip_info->tx_left, - strip_info->tx_size - strip_info->tx_left); - - /* - * 5. If watchdog has expired, reset the radio. Note: if there's data waiting in - * the buffer, strip_write_some_more will send it after the reset has finished - */ - if (doreset) { - ResetRadio(strip_info); - return; - } - - if (1) { - struct in_device *in_dev; - - brd = addr = 0; - rcu_read_lock(); - in_dev = __in_dev_get_rcu(strip_info->dev); - if (in_dev) { - if (in_dev->ifa_list) { - brd = in_dev->ifa_list->ifa_broadcast; - addr = in_dev->ifa_list->ifa_local; - } - } - rcu_read_unlock(); - } - - - /* - * 6. If it is time for a periodic ARP, queue one up to be sent. - * We only do this if: - * 1. The radio is working - * 2. It's time to send another periodic ARP - * 3. We really know what our address is (and it is not manually set to zero) - * 4. We have a designated broadcast address configured - * If we queue up an ARP packet when we don't have a designated broadcast - * address configured, then the packet will just have to be discarded in - * strip_make_packet. This is not fatal, but it causes misleading information - * to be displayed in tcpdump. tcpdump will report that periodic APRs are - * being sent, when in fact they are not, because they are all being dropped - * in the strip_make_packet routine. - */ - if (strip_info->working - && (long) jiffies - strip_info->gratuitous_arp >= 0 - && memcmp(strip_info->dev->dev_addr, zero_address.c, - sizeof(zero_address)) - && arp_query(haddr.c, brd, strip_info->dev)) { - /*printk(KERN_INFO "%s: Sending gratuitous ARP with interval %ld\n", - strip_info->dev->name, strip_info->arp_interval / HZ); */ - strip_info->gratuitous_arp = - jiffies + strip_info->arp_interval; - strip_info->arp_interval *= 2; - if (strip_info->arp_interval > MaxARPInterval) - strip_info->arp_interval = MaxARPInterval; - if (addr) - arp_send(ARPOP_REPLY, ETH_P_ARP, addr, /* Target address of ARP packet is our address */ - strip_info->dev, /* Device to send packet on */ - addr, /* Source IP address this ARP packet comes from */ - NULL, /* Destination HW address is NULL (broadcast it) */ - strip_info->dev->dev_addr, /* Source HW address is our HW address */ - strip_info->dev->dev_addr); /* Target HW address is our HW address (redundant) */ - } - - /* - * 7. All ready. Start the transmission - */ - strip_write_some_more(strip_info->tty); -} - -/* Encapsulate a datagram and kick it into a TTY queue. */ -static int strip_xmit(struct sk_buff *skb, struct net_device *dev) -{ - struct strip *strip_info = netdev_priv(dev); - - if (!netif_running(dev)) { - printk(KERN_ERR "%s: xmit call when iface is down\n", - dev->name); - return (1); - } - - netif_stop_queue(dev); - - del_timer(&strip_info->idle_timer); - - - if (time_after(jiffies, strip_info->pps_timer + HZ)) { - unsigned long t = jiffies - strip_info->pps_timer; - unsigned long rx_pps_count = (strip_info->rx_pps_count * HZ * 8 + t / 2) / t; - unsigned long tx_pps_count = (strip_info->tx_pps_count * HZ * 8 + t / 2) / t; - unsigned long sx_pps_count = (strip_info->sx_pps_count * HZ * 8 + t / 2) / t; - - strip_info->pps_timer = jiffies; - strip_info->rx_pps_count = 0; - strip_info->tx_pps_count = 0; - strip_info->sx_pps_count = 0; - - strip_info->rx_average_pps = (strip_info->rx_average_pps + rx_pps_count + 1) / 2; - strip_info->tx_average_pps = (strip_info->tx_average_pps + tx_pps_count + 1) / 2; - strip_info->sx_average_pps = (strip_info->sx_average_pps + sx_pps_count + 1) / 2; - - if (rx_pps_count / 8 >= 10) - printk(KERN_INFO "%s: WARNING: Receiving %ld packets per second.\n", - strip_info->dev->name, rx_pps_count / 8); - if (tx_pps_count / 8 >= 10) - printk(KERN_INFO "%s: WARNING: Tx %ld packets per second.\n", - strip_info->dev->name, tx_pps_count / 8); - if (sx_pps_count / 8 >= 10) - printk(KERN_INFO "%s: WARNING: Sending %ld packets per second.\n", - strip_info->dev->name, sx_pps_count / 8); - } - - spin_lock_bh(&strip_lock); - - strip_send(strip_info, skb); - - spin_unlock_bh(&strip_lock); - - if (skb) - dev_kfree_skb(skb); - return 0; -} - -/* - * IdleTask periodically calls strip_xmit, so even when we have no IP packets - * to send for an extended period of time, the watchdog processing still gets - * done to ensure that the radio stays in Starmode - */ - -static void strip_IdleTask(unsigned long parameter) -{ - strip_xmit(NULL, (struct net_device *) parameter); -} - -/* - * Create the MAC header for an arbitrary protocol layer - * - * saddr!=NULL means use this specific address (n/a for Metricom) - * saddr==NULL means use default device source address - * daddr!=NULL means use this destination address - * daddr==NULL means leave destination address alone - * (e.g. unresolved arp -- kernel will call - * rebuild_header later to fill in the address) - */ - -static int strip_header(struct sk_buff *skb, struct net_device *dev, - unsigned short type, const void *daddr, - const void *saddr, unsigned len) -{ - struct strip *strip_info = netdev_priv(dev); - STRIP_Header *header = (STRIP_Header *) skb_push(skb, sizeof(STRIP_Header)); - - /*printk(KERN_INFO "%s: strip_header 0x%04X %s\n", dev->name, type, - type == ETH_P_IP ? "IP" : type == ETH_P_ARP ? "ARP" : ""); */ - - header->src_addr = strip_info->true_dev_addr; - header->protocol = htons(type); - - /*HexDump("strip_header", netdev_priv(dev), skb->data, skb->data + skb->len); */ - - if (!daddr) - return (-dev->hard_header_len); - - header->dst_addr = *(MetricomAddress *) daddr; - return (dev->hard_header_len); -} - -/* - * Rebuild the MAC header. This is called after an ARP - * (or in future other address resolution) has completed on this - * sk_buff. We now let ARP fill in the other fields. - * I think this should return zero if packet is ready to send, - * or non-zero if it needs more time to do an address lookup - */ - -static int strip_rebuild_header(struct sk_buff *skb) -{ -#ifdef CONFIG_INET - STRIP_Header *header = (STRIP_Header *) skb->data; - - /* Arp find returns zero if if knows the address, */ - /* or if it doesn't know the address it sends an ARP packet and returns non-zero */ - return arp_find(header->dst_addr.c, skb) ? 1 : 0; -#else - return 0; -#endif -} - - -/************************************************************************/ -/* Receiving routines */ - -/* - * This function parses the response to the ATS300? command, - * extracting the radio version and serial number. - */ -static void get_radio_version(struct strip *strip_info, __u8 * ptr, __u8 * end) -{ - __u8 *p, *value_begin, *value_end; - int len; - - /* Determine the beginning of the second line of the payload */ - p = ptr; - while (p < end && *p != 10) - p++; - if (p >= end) - return; - p++; - value_begin = p; - - /* Determine the end of line */ - while (p < end && *p != 10) - p++; - if (p >= end) - return; - value_end = p; - p++; - - len = value_end - value_begin; - len = min_t(int, len, sizeof(FirmwareVersion) - 1); - if (strip_info->firmware_version.c[0] == 0) - printk(KERN_INFO "%s: Radio Firmware: %.*s\n", - strip_info->dev->name, len, value_begin); - sprintf(strip_info->firmware_version.c, "%.*s", len, value_begin); - - /* Look for the first colon */ - while (p < end && *p != ':') - p++; - if (p >= end) - return; - /* Skip over the space */ - p += 2; - len = sizeof(SerialNumber) - 1; - if (p + len <= end) { - sprintf(strip_info->serial_number.c, "%.*s", len, p); - } else { - printk(KERN_DEBUG - "STRIP: radio serial number shorter (%zd) than expected (%d)\n", - end - p, len); - } -} - -/* - * This function parses the response to the ATS325? command, - * extracting the radio battery voltage. - */ -static void get_radio_voltage(struct strip *strip_info, __u8 * ptr, __u8 * end) -{ - int len; - - len = sizeof(BatteryVoltage) - 1; - if (ptr + len <= end) { - sprintf(strip_info->battery_voltage.c, "%.*s", len, ptr); - } else { - printk(KERN_DEBUG - "STRIP: radio voltage string shorter (%zd) than expected (%d)\n", - end - ptr, len); - } -} - -/* - * This function parses the responses to the AT~LA and ATS311 commands, - * which list the radio's neighbours. - */ -static void get_radio_neighbours(MetricomNodeTable * table, __u8 * ptr, __u8 * end) -{ - table->num_nodes = 0; - while (ptr < end && table->num_nodes < NODE_TABLE_SIZE) { - MetricomNode *node = &table->node[table->num_nodes++]; - char *dst = node->c, *limit = dst + sizeof(*node) - 1; - while (ptr < end && *ptr <= 32) - ptr++; - while (ptr < end && dst < limit && *ptr != 10) - *dst++ = *ptr++; - *dst++ = 0; - while (ptr < end && ptr[-1] != 10) - ptr++; - } - do_gettimeofday(&table->timestamp); -} - -static int get_radio_address(struct strip *strip_info, __u8 * p) -{ - MetricomAddress addr; - - if (string_to_radio_address(&addr, p)) - return (1); - - /* See if our radio address has changed */ - if (memcmp(strip_info->true_dev_addr.c, addr.c, sizeof(addr))) { - MetricomAddressString addr_string; - radio_address_to_string(&addr, &addr_string); - printk(KERN_INFO "%s: Radio address = %s\n", - strip_info->dev->name, addr_string.c); - strip_info->true_dev_addr = addr; - if (!strip_info->manual_dev_addr) - *(MetricomAddress *) strip_info->dev->dev_addr = - addr; - /* Give the radio a few seconds to get its head straight, then send an arp */ - strip_info->gratuitous_arp = jiffies + 15 * HZ; - strip_info->arp_interval = 1 * HZ; - } - return (0); -} - -static int verify_checksum(struct strip *strip_info) -{ - __u8 *p = strip_info->sx_buff; - __u8 *end = strip_info->sx_buff + strip_info->sx_count - 4; - u_short sum = - (READHEX16(end[0]) << 12) | (READHEX16(end[1]) << 8) | - (READHEX16(end[2]) << 4) | (READHEX16(end[3])); - while (p < end) - sum -= *p++; - if (sum == 0 && strip_info->firmware_level == StructuredMessages) { - strip_info->firmware_level = ChecksummedMessages; - printk(KERN_INFO "%s: Radio provides message checksums\n", - strip_info->dev->name); - } - return (sum == 0); -} - -static void RecvErr(char *msg, struct strip *strip_info) -{ - __u8 *ptr = strip_info->sx_buff; - __u8 *end = strip_info->sx_buff + strip_info->sx_count; - DumpData(msg, strip_info, ptr, end); - strip_info->rx_errors++; -} - -static void RecvErr_Message(struct strip *strip_info, __u8 * sendername, - const __u8 * msg, u_long len) -{ - if (has_prefix(msg, len, "001")) { /* Not in StarMode! */ - RecvErr("Error Msg:", strip_info); - printk(KERN_INFO "%s: Radio %s is not in StarMode\n", - strip_info->dev->name, sendername); - } - - else if (has_prefix(msg, len, "002")) { /* Remap handle */ - /* We ignore "Remap handle" messages for now */ - } - - else if (has_prefix(msg, len, "003")) { /* Can't resolve name */ - RecvErr("Error Msg:", strip_info); - printk(KERN_INFO "%s: Destination radio name is unknown\n", - strip_info->dev->name); - } - - else if (has_prefix(msg, len, "004")) { /* Name too small or missing */ - strip_info->watchdog_doreset = jiffies + LongTime; -#if TICKLE_TIMERS - { - struct timeval tv; - do_gettimeofday(&tv); - printk(KERN_INFO - "**** Got ERR_004 response at %02d.%06d\n", - tv.tv_sec % 100, tv.tv_usec); - } -#endif - if (!strip_info->working) { - strip_info->working = TRUE; - printk(KERN_INFO "%s: Radio now in starmode\n", - strip_info->dev->name); - /* - * If the radio has just entered a working state, we should do our first - * probe ASAP, so that we find out our radio address etc. without delay. - */ - strip_info->watchdog_doprobe = jiffies; - } - if (strip_info->firmware_level == NoStructure && sendername) { - strip_info->firmware_level = StructuredMessages; - strip_info->next_command = 0; /* Try to enable checksums ASAP */ - printk(KERN_INFO - "%s: Radio provides structured messages\n", - strip_info->dev->name); - } - if (strip_info->firmware_level >= StructuredMessages) { - /* - * If this message has a valid checksum on the end, then the call to verify_checksum - * will elevate the firmware_level to ChecksummedMessages for us. (The actual return - * code from verify_checksum is ignored here.) - */ - verify_checksum(strip_info); - /* - * If the radio has structured messages but we don't yet have all our information about it, - * we should do probes without delay, until we have gathered all the information - */ - if (!GOT_ALL_RADIO_INFO(strip_info)) - strip_info->watchdog_doprobe = jiffies; - } - } - - else if (has_prefix(msg, len, "005")) /* Bad count specification */ - RecvErr("Error Msg:", strip_info); - - else if (has_prefix(msg, len, "006")) /* Header too big */ - RecvErr("Error Msg:", strip_info); - - else if (has_prefix(msg, len, "007")) { /* Body too big */ - RecvErr("Error Msg:", strip_info); - printk(KERN_ERR - "%s: Error! Packet size too big for radio.\n", - strip_info->dev->name); - } - - else if (has_prefix(msg, len, "008")) { /* Bad character in name */ - RecvErr("Error Msg:", strip_info); - printk(KERN_ERR - "%s: Radio name contains illegal character\n", - strip_info->dev->name); - } - - else if (has_prefix(msg, len, "009")) /* No count or line terminator */ - RecvErr("Error Msg:", strip_info); - - else if (has_prefix(msg, len, "010")) /* Invalid checksum */ - RecvErr("Error Msg:", strip_info); - - else if (has_prefix(msg, len, "011")) /* Checksum didn't match */ - RecvErr("Error Msg:", strip_info); - - else if (has_prefix(msg, len, "012")) /* Failed to transmit packet */ - RecvErr("Error Msg:", strip_info); - - else - RecvErr("Error Msg:", strip_info); -} - -static void process_AT_response(struct strip *strip_info, __u8 * ptr, - __u8 * end) -{ - u_long len; - __u8 *p = ptr; - while (p < end && p[-1] != 10) - p++; /* Skip past first newline character */ - /* Now ptr points to the AT command, and p points to the text of the response. */ - len = p - ptr; - -#if TICKLE_TIMERS - { - struct timeval tv; - do_gettimeofday(&tv); - printk(KERN_INFO "**** Got AT response %.7s at %02d.%06d\n", - ptr, tv.tv_sec % 100, tv.tv_usec); - } -#endif - - if (has_prefix(ptr, len, "ATS300?")) - get_radio_version(strip_info, p, end); - else if (has_prefix(ptr, len, "ATS305?")) - get_radio_address(strip_info, p); - else if (has_prefix(ptr, len, "ATS311?")) - get_radio_neighbours(&strip_info->poletops, p, end); - else if (has_prefix(ptr, len, "ATS319=7")) - verify_checksum(strip_info); - else if (has_prefix(ptr, len, "ATS325?")) - get_radio_voltage(strip_info, p, end); - else if (has_prefix(ptr, len, "AT~LA")) - get_radio_neighbours(&strip_info->portables, p, end); - else - RecvErr("Unknown AT Response:", strip_info); -} - -static void process_ACK(struct strip *strip_info, __u8 * ptr, __u8 * end) -{ - /* Currently we don't do anything with ACKs from the radio */ -} - -static void process_Info(struct strip *strip_info, __u8 * ptr, __u8 * end) -{ - if (ptr + 16 > end) - RecvErr("Bad Info Msg:", strip_info); -} - -static struct net_device *get_strip_dev(struct strip *strip_info) -{ - /* If our hardware address is *manually set* to zero, and we know our */ - /* real radio hardware address, try to find another strip device that has been */ - /* manually set to that address that we can 'transfer ownership' of this packet to */ - if (strip_info->manual_dev_addr && - !memcmp(strip_info->dev->dev_addr, zero_address.c, - sizeof(zero_address)) - && memcmp(&strip_info->true_dev_addr, zero_address.c, - sizeof(zero_address))) { - struct net_device *dev; - read_lock_bh(&dev_base_lock); - for_each_netdev(&init_net, dev) { - if (dev->type == strip_info->dev->type && - !memcmp(dev->dev_addr, - &strip_info->true_dev_addr, - sizeof(MetricomAddress))) { - printk(KERN_INFO - "%s: Transferred packet ownership to %s.\n", - strip_info->dev->name, dev->name); - read_unlock_bh(&dev_base_lock); - return (dev); - } - } - read_unlock_bh(&dev_base_lock); - } - return (strip_info->dev); -} - -/* - * Send one completely decapsulated datagram to the next layer. - */ - -static void deliver_packet(struct strip *strip_info, STRIP_Header * header, - __u16 packetlen) -{ - struct sk_buff *skb = dev_alloc_skb(sizeof(STRIP_Header) + packetlen); - if (!skb) { - printk(KERN_ERR "%s: memory squeeze, dropping packet.\n", - strip_info->dev->name); - strip_info->rx_dropped++; - } else { - memcpy(skb_put(skb, sizeof(STRIP_Header)), header, - sizeof(STRIP_Header)); - memcpy(skb_put(skb, packetlen), strip_info->rx_buff, - packetlen); - skb->dev = get_strip_dev(strip_info); - skb->protocol = header->protocol; - skb_reset_mac_header(skb); - - /* Having put a fake header on the front of the sk_buff for the */ - /* benefit of tools like tcpdump, skb_pull now 'consumes' that */ - /* fake header before we hand the packet up to the next layer. */ - skb_pull(skb, sizeof(STRIP_Header)); - - /* Finally, hand the packet up to the next layer (e.g. IP or ARP, etc.) */ - strip_info->rx_packets++; - strip_info->rx_pps_count++; -#ifdef EXT_COUNTERS - strip_info->rx_bytes += packetlen; -#endif - skb->dev->last_rx = jiffies; - netif_rx(skb); - } -} - -static void process_IP_packet(struct strip *strip_info, - STRIP_Header * header, __u8 * ptr, - __u8 * end) -{ - __u16 packetlen; - - /* Decode start of the IP packet header */ - ptr = UnStuffData(ptr, end, strip_info->rx_buff, 4); - if (!ptr) { - RecvErr("IP Packet too short", strip_info); - return; - } - - packetlen = ((__u16) strip_info->rx_buff[2] << 8) | strip_info->rx_buff[3]; - - if (packetlen > MAX_RECV_MTU) { - printk(KERN_INFO "%s: Dropping oversized received IP packet: %d bytes\n", - strip_info->dev->name, packetlen); - strip_info->rx_dropped++; - return; - } - - /*printk(KERN_INFO "%s: Got %d byte IP packet\n", strip_info->dev->name, packetlen); */ - - /* Decode remainder of the IP packet */ - ptr = - UnStuffData(ptr, end, strip_info->rx_buff + 4, packetlen - 4); - if (!ptr) { - RecvErr("IP Packet too short", strip_info); - return; - } - - if (ptr < end) { - RecvErr("IP Packet too long", strip_info); - return; - } - - header->protocol = htons(ETH_P_IP); - - deliver_packet(strip_info, header, packetlen); -} - -static void process_ARP_packet(struct strip *strip_info, - STRIP_Header * header, __u8 * ptr, - __u8 * end) -{ - __u16 packetlen; - struct arphdr *arphdr = (struct arphdr *) strip_info->rx_buff; - - /* Decode start of the ARP packet */ - ptr = UnStuffData(ptr, end, strip_info->rx_buff, 8); - if (!ptr) { - RecvErr("ARP Packet too short", strip_info); - return; - } - - packetlen = 8 + (arphdr->ar_hln + arphdr->ar_pln) * 2; - - if (packetlen > MAX_RECV_MTU) { - printk(KERN_INFO - "%s: Dropping oversized received ARP packet: %d bytes\n", - strip_info->dev->name, packetlen); - strip_info->rx_dropped++; - return; - } - - /*printk(KERN_INFO "%s: Got %d byte ARP %s\n", - strip_info->dev->name, packetlen, - ntohs(arphdr->ar_op) == ARPOP_REQUEST ? "request" : "reply"); */ - - /* Decode remainder of the ARP packet */ - ptr = - UnStuffData(ptr, end, strip_info->rx_buff + 8, packetlen - 8); - if (!ptr) { - RecvErr("ARP Packet too short", strip_info); - return; - } - - if (ptr < end) { - RecvErr("ARP Packet too long", strip_info); - return; - } - - header->protocol = htons(ETH_P_ARP); - - deliver_packet(strip_info, header, packetlen); -} - -/* - * process_text_message processes a -terminated block of data received - * from the radio that doesn't begin with a '*' character. All normal - * Starmode communication messages with the radio begin with a '*', - * so any text that does not indicates a serial port error, a radio that - * is in Hayes command mode instead of Starmode, or a radio with really - * old firmware that doesn't frame its Starmode responses properly. - */ -static void process_text_message(struct strip *strip_info) -{ - __u8 *msg = strip_info->sx_buff; - int len = strip_info->sx_count; - - /* Check for anything that looks like it might be our radio name */ - /* (This is here for backwards compatibility with old firmware) */ - if (len == 9 && get_radio_address(strip_info, msg) == 0) - return; - - if (text_equal(msg, len, "OK")) - return; /* Ignore 'OK' responses from prior commands */ - if (text_equal(msg, len, "ERROR")) - return; /* Ignore 'ERROR' messages */ - if (has_prefix(msg, len, "ate0q1")) - return; /* Ignore character echo back from the radio */ - - /* Catch other error messages */ - /* (This is here for backwards compatibility with old firmware) */ - if (has_prefix(msg, len, "ERR_")) { - RecvErr_Message(strip_info, NULL, &msg[4], len - 4); - return; - } - - RecvErr("No initial *", strip_info); -} - -/* - * process_message processes a -terminated block of data received - * from the radio. If the radio is not in Starmode or has old firmware, - * it may be a line of text in response to an AT command. Ideally, with - * a current radio that's properly in Starmode, all data received should - * be properly framed and checksummed radio message blocks, containing - * either a starmode packet, or a other communication from the radio - * firmware, like "INF_" Info messages and &COMMAND responses. - */ -static void process_message(struct strip *strip_info) -{ - STRIP_Header header = { zero_address, zero_address, 0 }; - __u8 *ptr = strip_info->sx_buff; - __u8 *end = strip_info->sx_buff + strip_info->sx_count; - __u8 sendername[32], *sptr = sendername; - MetricomKey key; - - /*HexDump("Receiving", strip_info, ptr, end); */ - - /* Check for start of address marker, and then skip over it */ - if (*ptr == '*') - ptr++; - else { - process_text_message(strip_info); - return; - } - - /* Copy out the return address */ - while (ptr < end && *ptr != '*' - && sptr < ARRAY_END(sendername) - 1) - *sptr++ = *ptr++; - *sptr = 0; /* Null terminate the sender name */ - - /* Check for end of address marker, and skip over it */ - if (ptr >= end || *ptr != '*') { - RecvErr("No second *", strip_info); - return; - } - ptr++; /* Skip the second '*' */ - - /* If the sender name is "&COMMAND", ignore this 'packet' */ - /* (This is here for backwards compatibility with old firmware) */ - if (!strcmp(sendername, "&COMMAND")) { - strip_info->firmware_level = NoStructure; - strip_info->next_command = CompatibilityCommand; - return; - } - - if (ptr + 4 > end) { - RecvErr("No proto key", strip_info); - return; - } - - /* Get the protocol key out of the buffer */ - key.c[0] = *ptr++; - key.c[1] = *ptr++; - key.c[2] = *ptr++; - key.c[3] = *ptr++; - - /* If we're using checksums, verify the checksum at the end of the packet */ - if (strip_info->firmware_level >= ChecksummedMessages) { - end -= 4; /* Chop the last four bytes off the packet (they're the checksum) */ - if (ptr > end) { - RecvErr("Missing Checksum", strip_info); - return; - } - if (!verify_checksum(strip_info)) { - RecvErr("Bad Checksum", strip_info); - return; - } - } - - /*printk(KERN_INFO "%s: Got packet from \"%s\".\n", strip_info->dev->name, sendername); */ - - /* - * Fill in (pseudo) source and destination addresses in the packet. - * We assume that the destination address was our address (the radio does not - * tell us this). If the radio supplies a source address, then we use it. - */ - header.dst_addr = strip_info->true_dev_addr; - string_to_radio_address(&header.src_addr, sendername); - -#ifdef EXT_COUNTERS - if (key.l == SIP0Key.l) { - strip_info->rx_rbytes += (end - ptr); - process_IP_packet(strip_info, &header, ptr, end); - } else if (key.l == ARP0Key.l) { - strip_info->rx_rbytes += (end - ptr); - process_ARP_packet(strip_info, &header, ptr, end); - } else if (key.l == ATR_Key.l) { - strip_info->rx_ebytes += (end - ptr); - process_AT_response(strip_info, ptr, end); - } else if (key.l == ACK_Key.l) { - strip_info->rx_ebytes += (end - ptr); - process_ACK(strip_info, ptr, end); - } else if (key.l == INF_Key.l) { - strip_info->rx_ebytes += (end - ptr); - process_Info(strip_info, ptr, end); - } else if (key.l == ERR_Key.l) { - strip_info->rx_ebytes += (end - ptr); - RecvErr_Message(strip_info, sendername, ptr, end - ptr); - } else - RecvErr("Unrecognized protocol key", strip_info); -#else - if (key.l == SIP0Key.l) - process_IP_packet(strip_info, &header, ptr, end); - else if (key.l == ARP0Key.l) - process_ARP_packet(strip_info, &header, ptr, end); - else if (key.l == ATR_Key.l) - process_AT_response(strip_info, ptr, end); - else if (key.l == ACK_Key.l) - process_ACK(strip_info, ptr, end); - else if (key.l == INF_Key.l) - process_Info(strip_info, ptr, end); - else if (key.l == ERR_Key.l) - RecvErr_Message(strip_info, sendername, ptr, end - ptr); - else - RecvErr("Unrecognized protocol key", strip_info); -#endif -} - -#define TTYERROR(X) ((X) == TTY_BREAK ? "Break" : \ - (X) == TTY_FRAME ? "Framing Error" : \ - (X) == TTY_PARITY ? "Parity Error" : \ - (X) == TTY_OVERRUN ? "Hardware Overrun" : "Unknown Error") - -/* - * Handle the 'receiver data ready' interrupt. - * This function is called by the 'tty_io' module in the kernel when - * a block of STRIP data has been received, which can now be decapsulated - * and sent on to some IP layer for further processing. - */ - -static void strip_receive_buf(struct tty_struct *tty, const unsigned char *cp, - char *fp, int count) -{ - struct strip *strip_info = (struct strip *) tty->disc_data; - const unsigned char *end = cp + count; - - if (!strip_info || strip_info->magic != STRIP_MAGIC - || !netif_running(strip_info->dev)) - return; - - spin_lock_bh(&strip_lock); -#if 0 - { - struct timeval tv; - do_gettimeofday(&tv); - printk(KERN_INFO - "**** strip_receive_buf: %3d bytes at %02d.%06d\n", - count, tv.tv_sec % 100, tv.tv_usec); - } -#endif - -#ifdef EXT_COUNTERS - strip_info->rx_sbytes += count; -#endif - - /* Read the characters out of the buffer */ - while (cp < end) { - if (fp && *fp) - printk(KERN_INFO "%s: %s on serial port\n", - strip_info->dev->name, TTYERROR(*fp)); - if (fp && *fp++ && !strip_info->discard) { /* If there's a serial error, record it */ - /* If we have some characters in the buffer, discard them */ - strip_info->discard = strip_info->sx_count; - strip_info->rx_errors++; - } - - /* Leading control characters (CR, NL, Tab, etc.) are ignored */ - if (strip_info->sx_count > 0 || *cp >= ' ') { - if (*cp == 0x0D) { /* If end of packet, decide what to do with it */ - if (strip_info->sx_count > 3000) - printk(KERN_INFO - "%s: Cut a %d byte packet (%zd bytes remaining)%s\n", - strip_info->dev->name, - strip_info->sx_count, - end - cp - 1, - strip_info-> - discard ? " (discarded)" : - ""); - if (strip_info->sx_count > - strip_info->sx_size) { - strip_info->rx_over_errors++; - printk(KERN_INFO - "%s: sx_buff overflow (%d bytes total)\n", - strip_info->dev->name, - strip_info->sx_count); - } else if (strip_info->discard) - printk(KERN_INFO - "%s: Discarding bad packet (%d/%d)\n", - strip_info->dev->name, - strip_info->discard, - strip_info->sx_count); - else - process_message(strip_info); - strip_info->discard = 0; - strip_info->sx_count = 0; - } else { - /* Make sure we have space in the buffer */ - if (strip_info->sx_count < - strip_info->sx_size) - strip_info->sx_buff[strip_info-> - sx_count] = - *cp; - strip_info->sx_count++; - } - } - cp++; - } - spin_unlock_bh(&strip_lock); -} - - -/************************************************************************/ -/* General control routines */ - -static int set_mac_address(struct strip *strip_info, - MetricomAddress * addr) -{ - /* - * We're using a manually specified address if the address is set - * to anything other than all ones. Setting the address to all ones - * disables manual mode and goes back to automatic address determination - * (tracking the true address that the radio has). - */ - strip_info->manual_dev_addr = - memcmp(addr->c, broadcast_address.c, - sizeof(broadcast_address)); - if (strip_info->manual_dev_addr) - *(MetricomAddress *) strip_info->dev->dev_addr = *addr; - else - *(MetricomAddress *) strip_info->dev->dev_addr = - strip_info->true_dev_addr; - return 0; -} - -static int strip_set_mac_address(struct net_device *dev, void *addr) -{ - struct strip *strip_info = netdev_priv(dev); - struct sockaddr *sa = addr; - printk(KERN_INFO "%s: strip_set_dev_mac_address called\n", dev->name); - set_mac_address(strip_info, (MetricomAddress *) sa->sa_data); - return 0; -} - -static struct net_device_stats *strip_get_stats(struct net_device *dev) -{ - struct strip *strip_info = netdev_priv(dev); - static struct net_device_stats stats; - - memset(&stats, 0, sizeof(struct net_device_stats)); - - stats.rx_packets = strip_info->rx_packets; - stats.tx_packets = strip_info->tx_packets; - stats.rx_dropped = strip_info->rx_dropped; - stats.tx_dropped = strip_info->tx_dropped; - stats.tx_errors = strip_info->tx_errors; - stats.rx_errors = strip_info->rx_errors; - stats.rx_over_errors = strip_info->rx_over_errors; - return (&stats); -} - - -/************************************************************************/ -/* Opening and closing */ - -/* - * Here's the order things happen: - * When the user runs "slattach -p strip ..." - * 1. The TTY module calls strip_open;; - * 2. strip_open calls strip_alloc - * 3. strip_alloc calls register_netdev - * 4. register_netdev calls strip_dev_init - * 5. then strip_open finishes setting up the strip_info - * - * When the user runs "ifconfig st up address netmask ..." - * 6. strip_open_low gets called - * - * When the user runs "ifconfig st down" - * 7. strip_close_low gets called - * - * When the user kills the slattach process - * 8. strip_close gets called - * 9. strip_close calls dev_close - * 10. if the device is still up, then dev_close calls strip_close_low - * 11. strip_close calls strip_free - */ - -/* Open the low-level part of the STRIP channel. Easy! */ - -static int strip_open_low(struct net_device *dev) -{ - struct strip *strip_info = netdev_priv(dev); - - if (strip_info->tty == NULL) - return (-ENODEV); - - if (!allocate_buffers(strip_info, dev->mtu)) - return (-ENOMEM); - - strip_info->sx_count = 0; - strip_info->tx_left = 0; - - strip_info->discard = 0; - strip_info->working = FALSE; - strip_info->firmware_level = NoStructure; - strip_info->next_command = CompatibilityCommand; - strip_info->user_baud = tty_get_baud_rate(strip_info->tty); - - printk(KERN_INFO "%s: Initializing Radio.\n", - strip_info->dev->name); - ResetRadio(strip_info); - strip_info->idle_timer.expires = jiffies + 1 * HZ; - add_timer(&strip_info->idle_timer); - netif_wake_queue(dev); - return (0); -} - - -/* - * Close the low-level part of the STRIP channel. Easy! - */ - -static int strip_close_low(struct net_device *dev) -{ - struct strip *strip_info = netdev_priv(dev); - - if (strip_info->tty == NULL) - return -EBUSY; - strip_info->tty->flags &= ~(1 << TTY_DO_WRITE_WAKEUP); - - netif_stop_queue(dev); - - /* - * Free all STRIP frame buffers. - */ - kfree(strip_info->rx_buff); - strip_info->rx_buff = NULL; - kfree(strip_info->sx_buff); - strip_info->sx_buff = NULL; - kfree(strip_info->tx_buff); - strip_info->tx_buff = NULL; - - del_timer(&strip_info->idle_timer); - return 0; -} - -static const struct header_ops strip_header_ops = { - .create = strip_header, - .rebuild = strip_rebuild_header, -}; - -/* - * This routine is called by DDI when the - * (dynamically assigned) device is registered - */ - -static void strip_dev_setup(struct net_device *dev) -{ - /* - * Finish setting up the DEVICE info. - */ - - dev->trans_start = 0; - dev->last_rx = 0; - dev->tx_queue_len = 30; /* Drop after 30 frames queued */ - - dev->flags = 0; - dev->mtu = DEFAULT_STRIP_MTU; - dev->type = ARPHRD_METRICOM; /* dtang */ - dev->hard_header_len = sizeof(STRIP_Header); - /* - * dev->priv Already holds a pointer to our struct strip - */ - - *(MetricomAddress *) & dev->broadcast = broadcast_address; - dev->dev_addr[0] = 0; - dev->addr_len = sizeof(MetricomAddress); - - /* - * Pointers to interface service routines. - */ - - dev->open = strip_open_low; - dev->stop = strip_close_low; - dev->hard_start_xmit = strip_xmit; - dev->header_ops = &strip_header_ops; - - dev->set_mac_address = strip_set_mac_address; - dev->get_stats = strip_get_stats; - dev->change_mtu = strip_change_mtu; -} - -/* - * Free a STRIP channel. - */ - -static void strip_free(struct strip *strip_info) -{ - spin_lock_bh(&strip_lock); - list_del_rcu(&strip_info->list); - spin_unlock_bh(&strip_lock); - - strip_info->magic = 0; - - free_netdev(strip_info->dev); -} - - -/* - * Allocate a new free STRIP channel - */ -static struct strip *strip_alloc(void) -{ - struct list_head *n; - struct net_device *dev; - struct strip *strip_info; - - dev = alloc_netdev(sizeof(struct strip), "st%d", - strip_dev_setup); - - if (!dev) - return NULL; /* If no more memory, return */ - - - strip_info = netdev_priv(dev); - strip_info->dev = dev; - - strip_info->magic = STRIP_MAGIC; - strip_info->tty = NULL; - - strip_info->gratuitous_arp = jiffies + LongTime; - strip_info->arp_interval = 0; - init_timer(&strip_info->idle_timer); - strip_info->idle_timer.data = (long) dev; - strip_info->idle_timer.function = strip_IdleTask; - - - spin_lock_bh(&strip_lock); - rescan: - /* - * Search the list to find where to put our new entry - * (and in the process decide what channel number it is - * going to be) - */ - list_for_each(n, &strip_list) { - struct strip *s = hlist_entry(n, struct strip, list); - - if (s->dev->base_addr == dev->base_addr) { - ++dev->base_addr; - goto rescan; - } - } - - sprintf(dev->name, "st%ld", dev->base_addr); - - list_add_tail_rcu(&strip_info->list, &strip_list); - spin_unlock_bh(&strip_lock); - - return strip_info; -} - -/* - * Open the high-level part of the STRIP channel. - * This function is called by the TTY module when the - * STRIP line discipline is called for. Because we are - * sure the tty line exists, we only have to link it to - * a free STRIP channel... - */ - -static int strip_open(struct tty_struct *tty) -{ - struct strip *strip_info = (struct strip *) tty->disc_data; - - /* - * First make sure we're not already connected. - */ - - if (strip_info && strip_info->magic == STRIP_MAGIC) - return -EEXIST; - - /* - * We need a write method. - */ - - if (tty->ops->write == NULL || tty->ops->set_termios == NULL) - return -EOPNOTSUPP; - - /* - * OK. Find a free STRIP channel to use. - */ - if ((strip_info = strip_alloc()) == NULL) - return -ENFILE; - - /* - * Register our newly created device so it can be ifconfig'd - * strip_dev_init() will be called as a side-effect - */ - - if (register_netdev(strip_info->dev) != 0) { - printk(KERN_ERR "strip: register_netdev() failed.\n"); - strip_free(strip_info); - return -ENFILE; - } - - strip_info->tty = tty; - tty->disc_data = strip_info; - tty->receive_room = 65536; - - tty_driver_flush_buffer(tty); - - /* - * Restore default settings - */ - - strip_info->dev->type = ARPHRD_METRICOM; /* dtang */ - - /* - * Set tty options - */ - - tty->termios->c_iflag |= IGNBRK | IGNPAR; /* Ignore breaks and parity errors. */ - tty->termios->c_cflag |= CLOCAL; /* Ignore modem control signals. */ - tty->termios->c_cflag &= ~HUPCL; /* Don't close on hup */ - - printk(KERN_INFO "STRIP: device \"%s\" activated\n", - strip_info->dev->name); - - /* - * Done. We have linked the TTY line to a channel. - */ - return (strip_info->dev->base_addr); -} - -/* - * Close down a STRIP channel. - * This means flushing out any pending queues, and then restoring the - * TTY line discipline to what it was before it got hooked to STRIP - * (which usually is TTY again). - */ - -static void strip_close(struct tty_struct *tty) -{ - struct strip *strip_info = (struct strip *) tty->disc_data; - - /* - * First make sure we're connected. - */ - - if (!strip_info || strip_info->magic != STRIP_MAGIC) - return; - - unregister_netdev(strip_info->dev); - - tty->disc_data = NULL; - strip_info->tty = NULL; - printk(KERN_INFO "STRIP: device \"%s\" closed down\n", - strip_info->dev->name); - strip_free(strip_info); - tty->disc_data = NULL; -} - - -/************************************************************************/ -/* Perform I/O control calls on an active STRIP channel. */ - -static int strip_ioctl(struct tty_struct *tty, struct file *file, - unsigned int cmd, unsigned long arg) -{ - struct strip *strip_info = (struct strip *) tty->disc_data; - - /* - * First make sure we're connected. - */ - - if (!strip_info || strip_info->magic != STRIP_MAGIC) - return -EINVAL; - - switch (cmd) { - case SIOCGIFNAME: - if(copy_to_user((void __user *) arg, strip_info->dev->name, strlen(strip_info->dev->name) + 1)) - return -EFAULT; - break; - case SIOCSIFHWADDR: - { - MetricomAddress addr; - //printk(KERN_INFO "%s: SIOCSIFHWADDR\n", strip_info->dev->name); - if(copy_from_user(&addr, (void __user *) arg, sizeof(MetricomAddress))) - return -EFAULT; - return set_mac_address(strip_info, &addr); - } - default: - return tty_mode_ioctl(tty, file, cmd, arg); - break; - } - return 0; -} - - -/************************************************************************/ -/* Initialization */ - -static struct tty_ldisc strip_ldisc = { - .magic = TTY_LDISC_MAGIC, - .name = "strip", - .owner = THIS_MODULE, - .open = strip_open, - .close = strip_close, - .ioctl = strip_ioctl, - .receive_buf = strip_receive_buf, - .write_wakeup = strip_write_some_more, -}; - -/* - * Initialize the STRIP driver. - * This routine is called at boot time, to bootstrap the multi-channel - * STRIP driver - */ - -static char signon[] __initdata = - KERN_INFO "STRIP: Version %s (unlimited channels)\n"; - -static int __init strip_init_driver(void) -{ - int status; - - printk(signon, StripVersion); - - - /* - * Fill in our line protocol discipline, and register it - */ - if ((status = tty_register_ldisc(N_STRIP, &strip_ldisc))) - printk(KERN_ERR "STRIP: can't register line discipline (err = %d)\n", - status); - - /* - * Register the status file with /proc - */ - proc_net_fops_create(&init_net, "strip", S_IFREG | S_IRUGO, &strip_seq_fops); - - return status; -} - -module_init(strip_init_driver); - -static const char signoff[] __exitdata = - KERN_INFO "STRIP: Module Unloaded\n"; - -static void __exit strip_exit_driver(void) -{ - int i; - struct list_head *p,*n; - - /* module ref count rules assure that all entries are unregistered */ - list_for_each_safe(p, n, &strip_list) { - struct strip *s = list_entry(p, struct strip, list); - strip_free(s); - } - - /* Unregister with the /proc/net file here. */ - proc_net_remove(&init_net, "strip"); - - if ((i = tty_unregister_ldisc(N_STRIP))) - printk(KERN_ERR "STRIP: can't unregister line discipline (err = %d)\n", i); - - printk(signoff); -} - -module_exit(strip_exit_driver); - -MODULE_AUTHOR("Stuart Cheshire "); -MODULE_DESCRIPTION("Starmode Radio IP (STRIP) Device Driver"); -MODULE_LICENSE("Dual BSD/GPL"); - -MODULE_SUPPORTED_DEVICE("Starmode Radio IP (STRIP) modem"); -- cgit v1.2.3 From 24b56e705587cd3a51efb1229e73ea6e3e757f05 Mon Sep 17 00:00:00 2001 From: Harvey Harrison Date: Sat, 14 Jun 2008 23:33:38 -0700 Subject: ath5k: use frame control helpers Signed-off-by: Harvey Harrison Signed-off-by: John W. Linville --- drivers/net/wireless/ath5k/base.c | 11 ++++------- 1 file changed, 4 insertions(+), 7 deletions(-) (limited to 'drivers/net/wireless') diff --git a/drivers/net/wireless/ath5k/base.c b/drivers/net/wireless/ath5k/base.c index 85045afc1ba..010c6655595 100644 --- a/drivers/net/wireless/ath5k/base.c +++ b/drivers/net/wireless/ath5k/base.c @@ -1691,9 +1691,9 @@ ath5k_rx_decrypted(struct ath5k_softc *sc, struct ath5k_desc *ds, /* Apparently when a default key is used to decrypt the packet the hw does not set the index used to decrypt. In such cases get the index from the packet. */ - if ((le16_to_cpu(hdr->frame_control) & IEEE80211_FCTL_PROTECTED) && - !(rs->rs_status & AR5K_RXERR_DECRYPT) && - skb->len >= hlen + 4) { + if (ieee80211_has_protected(hdr->frame_control) && + !(rs->rs_status & AR5K_RXERR_DECRYPT) && + skb->len >= hlen + 4) { keyix = skb->data[hlen + 3] >> 6; if (test_bit(keyix, sc->keymap)) @@ -1712,10 +1712,7 @@ ath5k_check_ibss_tsf(struct ath5k_softc *sc, struct sk_buff *skb, u32 hw_tu; struct ieee80211_mgmt *mgmt = (struct ieee80211_mgmt *)skb->data; - if ((le16_to_cpu(mgmt->frame_control) & IEEE80211_FCTL_FTYPE) == - IEEE80211_FTYPE_MGMT && - (le16_to_cpu(mgmt->frame_control) & IEEE80211_FCTL_STYPE) == - IEEE80211_STYPE_BEACON && + if (ieee80211_is_beacon(mgmt->frame_control) && le16_to_cpu(mgmt->u.beacon.capab_info) & WLAN_CAPABILITY_IBSS && memcmp(mgmt->bssid, sc->ah->ah_bssid, ETH_ALEN) == 0) { /* -- cgit v1.2.3 From 85365820590e2fb54684c7163047f866ccbf4760 Mon Sep 17 00:00:00 2001 From: Harvey Harrison Date: Sat, 14 Jun 2008 23:33:39 -0700 Subject: zd1211rw: use frame control helpers Signed-off-by: Harvey Harrison Signed-off-by: John W. Linville --- drivers/net/wireless/zd1211rw/zd_mac.c | 22 ++++++---------------- 1 file changed, 6 insertions(+), 16 deletions(-) (limited to 'drivers/net/wireless') diff --git a/drivers/net/wireless/zd1211rw/zd_mac.c b/drivers/net/wireless/zd1211rw/zd_mac.c index 6d86b365f15..317c5e24f80 100644 --- a/drivers/net/wireless/zd1211rw/zd_mac.c +++ b/drivers/net/wireless/zd1211rw/zd_mac.c @@ -376,8 +376,6 @@ static int zd_calc_tx_length_us(u8 *service, u8 zd_rate, u16 tx_length) static void cs_set_control(struct zd_mac *mac, struct zd_ctrlset *cs, struct ieee80211_hdr *header, u32 flags) { - u16 fctl = le16_to_cpu(header->frame_control); - /* * CONTROL TODO: * - if backoff needed, enable bit 0 @@ -395,8 +393,7 @@ static void cs_set_control(struct zd_mac *mac, struct zd_ctrlset *cs, cs->control |= ZD_CS_MULTICAST; /* PS-POLL */ - if ((fctl & (IEEE80211_FCTL_FTYPE|IEEE80211_FCTL_STYPE)) == - (IEEE80211_FTYPE_CTL|IEEE80211_STYPE_PSPOLL)) + if (ieee80211_is_pspoll(header->frame_control)) cs->control |= ZD_CS_PS_POLL_FRAME; if (flags & IEEE80211_TX_CTL_USE_RTS_CTS) @@ -550,13 +547,11 @@ static int zd_op_tx(struct ieee80211_hw *hw, struct sk_buff *skb) static int filter_ack(struct ieee80211_hw *hw, struct ieee80211_hdr *rx_hdr, struct ieee80211_rx_status *stats) { - u16 fc = le16_to_cpu(rx_hdr->frame_control); struct sk_buff *skb; struct sk_buff_head *q; unsigned long flags; - if ((fc & (IEEE80211_FCTL_FTYPE | IEEE80211_FCTL_STYPE)) != - (IEEE80211_FTYPE_CTL | IEEE80211_STYPE_ACK)) + if (!ieee80211_is_ack(rx_hdr->frame_control)) return 0; q = &zd_hw_mac(hw)->ack_wait_queue; @@ -584,8 +579,8 @@ int zd_mac_rx(struct ieee80211_hw *hw, const u8 *buffer, unsigned int length) const struct rx_status *status; struct sk_buff *skb; int bad_frame = 0; - u16 fc; - bool is_qos, is_4addr, need_padding; + __le16 fc; + int need_padding; int i; u8 rate; @@ -644,13 +639,8 @@ int zd_mac_rx(struct ieee80211_hw *hw, const u8 *buffer, unsigned int length) && !mac->pass_ctrl) return 0; - fc = le16_to_cpu(*((__le16 *) buffer)); - - is_qos = ((fc & IEEE80211_FCTL_FTYPE) == IEEE80211_FTYPE_DATA) && - (fc & IEEE80211_STYPE_QOS_DATA); - is_4addr = (fc & (IEEE80211_FCTL_TODS | IEEE80211_FCTL_FROMDS)) == - (IEEE80211_FCTL_TODS | IEEE80211_FCTL_FROMDS); - need_padding = is_qos ^ is_4addr; + fc = *(__le16 *)buffer; + need_padding = ieee80211_is_data_qos(fc) ^ ieee80211_has_a4(fc); skb = dev_alloc_skb(length + (need_padding ? 2 : 0)); if (skb == NULL) -- cgit v1.2.3 From f37d923422b61884a75a2a64865ed03ca5ccfc6d Mon Sep 17 00:00:00 2001 From: Harvey Harrison Date: Sat, 14 Jun 2008 23:33:39 -0700 Subject: b43: use frame control helpers Signed-off-by: Harvey Harrison Signed-off-by: John W. Linville --- drivers/net/wireless/b43/xmit.c | 17 +++++++---------- 1 file changed, 7 insertions(+), 10 deletions(-) (limited to 'drivers/net/wireless') diff --git a/drivers/net/wireless/b43/xmit.c b/drivers/net/wireless/b43/xmit.c index f9e1cff2aec..bf6f6c1ed4c 100644 --- a/drivers/net/wireless/b43/xmit.c +++ b/drivers/net/wireless/b43/xmit.c @@ -193,7 +193,7 @@ int b43_generate_txhdr(struct b43_wldev *dev, const struct ieee80211_hdr *wlhdr = (const struct ieee80211_hdr *)fragment_data; int use_encryption = (!(info->flags & IEEE80211_TX_CTL_DO_NOT_ENCRYPT)); - u16 fctl = le16_to_cpu(wlhdr->frame_control); + __le16 fctl = wlhdr->frame_control; struct ieee80211_rate *fbrate; u8 rate, rate_fb; int rate_ofdm, rate_fb_ofdm; @@ -259,7 +259,7 @@ int b43_generate_txhdr(struct b43_wldev *dev, B43_TXH_MAC_KEYIDX; mac_ctl |= (key->algorithm << B43_TXH_MAC_KEYALG_SHIFT) & B43_TXH_MAC_KEYALG; - wlhdr_len = ieee80211_get_hdrlen(fctl); + wlhdr_len = ieee80211_hdrlen(fctl); iv_len = min((size_t) info->control.iv_len, ARRAY_SIZE(txhdr->iv)); memcpy(txhdr->iv, ((u8 *) wlhdr) + wlhdr_len, iv_len); @@ -317,8 +317,7 @@ int b43_generate_txhdr(struct b43_wldev *dev, /* MAC control */ if (!(info->flags & IEEE80211_TX_CTL_NO_ACK)) mac_ctl |= B43_TXH_MAC_ACK; - if (!(((fctl & IEEE80211_FCTL_FTYPE) == IEEE80211_FTYPE_CTL) && - ((fctl & IEEE80211_FCTL_STYPE) == IEEE80211_STYPE_PSPOLL))) + if (!ieee80211_is_pspoll(fctl)) mac_ctl |= B43_TXH_MAC_HWSEQ; if (info->flags & IEEE80211_TX_CTL_FIRST_FRAGMENT) mac_ctl |= B43_TXH_MAC_STMSDU; @@ -509,7 +508,7 @@ void b43_rx(struct b43_wldev *dev, struct sk_buff *skb, const void *_rxhdr) struct b43_plcp_hdr6 *plcp; struct ieee80211_hdr *wlhdr; const struct b43_rxhdr_fw4 *rxhdr = _rxhdr; - u16 fctl; + __le16 fctl; u16 phystat0, phystat3, chanstat, mactime; u32 macstat; u16 chanid; @@ -549,7 +548,7 @@ void b43_rx(struct b43_wldev *dev, struct sk_buff *skb, const void *_rxhdr) goto drop; } wlhdr = (struct ieee80211_hdr *)(skb->data); - fctl = le16_to_cpu(wlhdr->frame_control); + fctl = wlhdr->frame_control; if (macstat & B43_RX_MAC_DEC) { unsigned int keyidx; @@ -564,7 +563,7 @@ void b43_rx(struct b43_wldev *dev, struct sk_buff *skb, const void *_rxhdr) B43_WARN_ON(keyidx >= dev->max_nr_keys); if (dev->key[keyidx].algorithm != B43_SEC_ALGO_NONE) { - wlhdr_len = ieee80211_get_hdrlen(fctl); + wlhdr_len = ieee80211_hdrlen(fctl); if (unlikely(skb->len < (wlhdr_len + 3))) { b43dbg(dev->wl, "RX: Packet size underrun (3)\n"); @@ -604,9 +603,7 @@ void b43_rx(struct b43_wldev *dev, struct sk_buff *skb, const void *_rxhdr) * of timestamp, i.e. about 65 milliseconds after the PHY received * the first symbol. */ - if (((fctl & (IEEE80211_FCTL_FTYPE | IEEE80211_FCTL_STYPE)) - == (IEEE80211_FTYPE_MGMT | IEEE80211_STYPE_BEACON)) || - dev->wl->radiotap_enabled) { + if (ieee80211_is_beacon(fctl) || dev->wl->radiotap_enabled) { u16 low_mactime_now; b43_tsf_read(dev, &status.mactime); -- cgit v1.2.3 From b99a017c01bb19b58fd0826e36a1bdacf581c545 Mon Sep 17 00:00:00 2001 From: Harvey Harrison Date: Sat, 14 Jun 2008 23:33:40 -0700 Subject: b43legacy: use frame control helpers Signed-off-by: Harvey Harrison Signed-off-by: John W. Linville --- drivers/net/wireless/b43legacy/xmit.c | 16 +++++++--------- 1 file changed, 7 insertions(+), 9 deletions(-) (limited to 'drivers/net/wireless') diff --git a/drivers/net/wireless/b43legacy/xmit.c b/drivers/net/wireless/b43legacy/xmit.c index 82dc04d5944..a3540787eb5 100644 --- a/drivers/net/wireless/b43legacy/xmit.c +++ b/drivers/net/wireless/b43legacy/xmit.c @@ -442,7 +442,7 @@ void b43legacy_rx(struct b43legacy_wldev *dev, struct b43legacy_plcp_hdr6 *plcp; struct ieee80211_hdr *wlhdr; const struct b43legacy_rxhdr_fw3 *rxhdr = _rxhdr; - u16 fctl; + __le16 fctl; u16 phystat0; u16 phystat3; u16 chanstat; @@ -480,7 +480,7 @@ void b43legacy_rx(struct b43legacy_wldev *dev, goto drop; } wlhdr = (struct ieee80211_hdr *)(skb->data); - fctl = le16_to_cpu(wlhdr->frame_control); + fctl = wlhdr->frame_control; if ((macstat & B43legacy_RX_MAC_DEC) && !(macstat & B43legacy_RX_MAC_DECERR)) { @@ -499,11 +499,11 @@ void b43legacy_rx(struct b43legacy_wldev *dev, if (dev->key[keyidx].algorithm != B43legacy_SEC_ALGO_NONE) { /* Remove PROTECTED flag to mark it as decrypted. */ - B43legacy_WARN_ON(!(fctl & IEEE80211_FCTL_PROTECTED)); - fctl &= ~IEEE80211_FCTL_PROTECTED; - wlhdr->frame_control = cpu_to_le16(fctl); + B43legacy_WARN_ON(!ieee80211_has_protected(fctl)); + fctl &= ~cpu_to_le16(IEEE80211_FCTL_PROTECTED); + wlhdr->frame_control = fctl; - wlhdr_len = ieee80211_get_hdrlen(fctl); + wlhdr_len = ieee80211_hdrlen(fctl); if (unlikely(skb->len < (wlhdr_len + 3))) { b43legacydbg(dev->wl, "RX: Packet size" " underrun3\n"); @@ -556,9 +556,7 @@ void b43legacy_rx(struct b43legacy_wldev *dev, * of timestamp, i.e. about 65 milliseconds after the PHY received * the first symbol. */ - if (((fctl & (IEEE80211_FCTL_FTYPE | IEEE80211_FCTL_STYPE)) - == (IEEE80211_FTYPE_MGMT | IEEE80211_STYPE_BEACON)) || - dev->wl->radiotap_enabled) { + if (ieee80211_is_beacon(fctl) || dev->wl->radiotap_enabled) { u16 low_mactime_now; b43legacy_tsf_read(dev, &status.mactime); -- cgit v1.2.3 From e800f17c6ffe8b0410d8cf060ab204b93e9c73ab Mon Sep 17 00:00:00 2001 From: Stephen Rothwell Date: Mon, 16 Jun 2008 15:35:10 +1000 Subject: wireless: fix fallout from device_create removal Signed-off-by: Stephen Rothwell Signed-off-by: John W. Linville --- drivers/net/wireless/mac80211_hwsim.c | 7 ++++--- 1 file changed, 4 insertions(+), 3 deletions(-) (limited to 'drivers/net/wireless') diff --git a/drivers/net/wireless/mac80211_hwsim.c b/drivers/net/wireless/mac80211_hwsim.c index 8da352ae682..5d30c57e396 100644 --- a/drivers/net/wireless/mac80211_hwsim.c +++ b/drivers/net/wireless/mac80211_hwsim.c @@ -430,15 +430,16 @@ static int __init init_mac80211_hwsim(void) hwsim_radios[i] = hw; data = hw->priv; - data->dev = device_create(hwsim_class, NULL, 0, "hwsim%d", i); + data->dev = device_create_drvdata(hwsim_class, NULL, 0, hw, + "hwsim%d", i); if (IS_ERR(data->dev)) { - printk(KERN_DEBUG "mac80211_hwsim: device_create " + printk(KERN_DEBUG + "mac80211_hwsim: device_create_drvdata " "failed (%ld)\n", PTR_ERR(data->dev)); err = -ENOMEM; goto failed; } data->dev->driver = &mac80211_hwsim_driver; - dev_set_drvdata(data->dev, hw); SET_IEEE80211_DEV(hw, data->dev); addr[3] = i >> 8; -- cgit v1.2.3 From ac1044628d477d655f5f70420c3493119abeb6d3 Mon Sep 17 00:00:00 2001 From: Ivo van Doorn Date: Mon, 16 Jun 2008 19:54:57 +0200 Subject: rt2x00: Use ieee80211 fc handlers With the introduction of the ieee80211 fc handlers we can now remove the rt2x00.h versions to use the global versions. Signed-off-by: Ivo van Doorn Reviewed-by: Harvey Harrison Signed-off-by: John W. Linville --- drivers/net/wireless/rt2x00/rt2x00.h | 27 --------------------------- drivers/net/wireless/rt2x00/rt2x00dev.c | 5 ++--- drivers/net/wireless/rt2x00/rt2x00queue.c | 14 +++++--------- 3 files changed, 7 insertions(+), 39 deletions(-) (limited to 'drivers/net/wireless') diff --git a/drivers/net/wireless/rt2x00/rt2x00.h b/drivers/net/wireless/rt2x00/rt2x00.h index 0da8f972a1b..21fd9b40be8 100644 --- a/drivers/net/wireless/rt2x00/rt2x00.h +++ b/drivers/net/wireless/rt2x00/rt2x00.h @@ -110,33 +110,6 @@ #define SHORT_DIFS ( SHORT_PIFS + SHORT_SLOT_TIME ) #define EIFS ( SIFS + (8 * (IEEE80211_HEADER + ACK_SIZE)) ) -/* - * IEEE802.11 header defines - */ -static inline int is_rts_frame(u16 fc) -{ - return (((fc & IEEE80211_FCTL_FTYPE) == IEEE80211_FTYPE_CTL) && - ((fc & IEEE80211_FCTL_STYPE) == IEEE80211_STYPE_RTS)); -} - -static inline int is_cts_frame(u16 fc) -{ - return (((fc & IEEE80211_FCTL_FTYPE) == IEEE80211_FTYPE_CTL) && - ((fc & IEEE80211_FCTL_STYPE) == IEEE80211_STYPE_CTS)); -} - -static inline int is_probe_resp(u16 fc) -{ - return (((fc & IEEE80211_FCTL_FTYPE) == IEEE80211_FTYPE_MGMT) && - ((fc & IEEE80211_FCTL_STYPE) == IEEE80211_STYPE_PROBE_RESP)); -} - -static inline int is_beacon(u16 fc) -{ - return (((fc & IEEE80211_FCTL_FTYPE) == IEEE80211_FTYPE_MGMT) && - ((fc & IEEE80211_FCTL_STYPE) == IEEE80211_STYPE_BEACON)); -} - /* * Chipset identification * The chipset on the device is composed of a RT and RF chip. diff --git a/drivers/net/wireless/rt2x00/rt2x00dev.c b/drivers/net/wireless/rt2x00/rt2x00dev.c index 9ea677320da..f9e75319770 100644 --- a/drivers/net/wireless/rt2x00/rt2x00dev.c +++ b/drivers/net/wireless/rt2x00/rt2x00dev.c @@ -561,7 +561,6 @@ void rt2x00lib_rxdone(struct queue_entry *entry, unsigned int align; unsigned int i; int idx = -1; - u16 fc; /* * The data behind the ieee80211 header must be @@ -606,8 +605,8 @@ void rt2x00lib_rxdone(struct queue_entry *entry, * Only update link status if this is a beacon frame carrying our bssid. */ hdr = (struct ieee80211_hdr *)entry->skb->data; - fc = le16_to_cpu(hdr->frame_control); - if (is_beacon(fc) && (rxdesc->dev_flags & RXDONE_MY_BSS)) + if (ieee80211_is_beacon(hdr->frame_control) && + (rxdesc->dev_flags & RXDONE_MY_BSS)) rt2x00lib_update_link_stats(&rt2x00dev->link, rxdesc->rssi); rt2x00dev->link.qual.rx_success++; diff --git a/drivers/net/wireless/rt2x00/rt2x00queue.c b/drivers/net/wireless/rt2x00/rt2x00queue.c index 7b52039b01a..15660b588a1 100644 --- a/drivers/net/wireless/rt2x00/rt2x00queue.c +++ b/drivers/net/wireless/rt2x00/rt2x00queue.c @@ -80,7 +80,6 @@ void rt2x00queue_create_tx_descriptor(struct queue_entry *entry, unsigned int data_length; unsigned int duration; unsigned int residual; - u16 frame_control; memset(txdesc, 0, sizeof(*txdesc)); @@ -95,11 +94,6 @@ void rt2x00queue_create_tx_descriptor(struct queue_entry *entry, /* Data length should be extended with 4 bytes for CRC */ data_length = entry->skb->len + 4; - /* - * Read required fields from ieee80211 header. - */ - frame_control = le16_to_cpu(hdr->frame_control); - /* * Check whether this frame is to be acked. */ @@ -109,9 +103,10 @@ void rt2x00queue_create_tx_descriptor(struct queue_entry *entry, /* * Check if this is a RTS/CTS frame */ - if (is_rts_frame(frame_control) || is_cts_frame(frame_control)) { + if (ieee80211_is_rts(hdr->frame_control) || + ieee80211_is_cts(hdr->frame_control)) { __set_bit(ENTRY_TXD_BURST, &txdesc->flags); - if (is_rts_frame(frame_control)) + if (ieee80211_is_rts(hdr->frame_control)) __set_bit(ENTRY_TXD_RTS_FRAME, &txdesc->flags); else __set_bit(ENTRY_TXD_CTS_FRAME, &txdesc->flags); @@ -139,7 +134,8 @@ void rt2x00queue_create_tx_descriptor(struct queue_entry *entry, * Beacons and probe responses require the tsf timestamp * to be inserted into the frame. */ - if (txdesc->queue == QID_BEACON || is_probe_resp(frame_control)) + if (ieee80211_is_beacon(hdr->frame_control) || + ieee80211_is_probe_resp(hdr->frame_control)) __set_bit(ENTRY_TXD_REQ_TIMESTAMP, &txdesc->flags); /* -- cgit v1.2.3 From c95edf5432f097c926dd3f59239ecde80da3b214 Mon Sep 17 00:00:00 2001 From: Gertjan van Wingerde Date: Mon, 16 Jun 2008 19:55:18 +0200 Subject: rt2x00: Properly clean up beacon skbs. The skbs containing the beacons weren't properly cleaned up for rt2400pci, rt2500pci, rt61pci, and rt73usb. Clean up those skbs in the manner appropriate for each driver. Signed-off-by: Gertjan van Wingerde Signed-off-by: Ivo van Doorn Signed-off-by: John W. Linville --- drivers/net/wireless/rt2x00/rt2x00dev.c | 6 ++++++ drivers/net/wireless/rt2x00/rt61pci.c | 6 ++++++ drivers/net/wireless/rt2x00/rt73usb.c | 6 ++++++ 3 files changed, 18 insertions(+) (limited to 'drivers/net/wireless') diff --git a/drivers/net/wireless/rt2x00/rt2x00dev.c b/drivers/net/wireless/rt2x00/rt2x00dev.c index f9e75319770..b8e0c4c3ed0 100644 --- a/drivers/net/wireless/rt2x00/rt2x00dev.c +++ b/drivers/net/wireless/rt2x00/rt2x00dev.c @@ -474,6 +474,12 @@ static void rt2x00lib_beacondone_iter(void *data, u8 *mac, vif->type != IEEE80211_IF_TYPE_IBSS) return; + /* + * Clean up the beacon skb. + */ + dev_kfree_skb_irq(intf->beacon->skb); + intf->beacon->skb = NULL; + spin_lock(&intf->lock); intf->delayed_flags |= DELAYED_UPDATE_BEACON; spin_unlock(&intf->lock); diff --git a/drivers/net/wireless/rt2x00/rt61pci.c b/drivers/net/wireless/rt2x00/rt61pci.c index 5b7267ece1b..27f30ae8f52 100644 --- a/drivers/net/wireless/rt2x00/rt61pci.c +++ b/drivers/net/wireless/rt2x00/rt61pci.c @@ -2402,6 +2402,12 @@ static int rt61pci_beacon_update(struct ieee80211_hw *hw, struct sk_buff *skb) skb->data, skb->len); rt61pci_kick_tx_queue(rt2x00dev, QID_BEACON); + /* + * Clean up beacon skb. + */ + dev_kfree_skb_any(skb); + intf->beacon->skb = NULL; + return 0; } diff --git a/drivers/net/wireless/rt2x00/rt73usb.c b/drivers/net/wireless/rt2x00/rt73usb.c index fceefd730ab..42b7e98b2d2 100644 --- a/drivers/net/wireless/rt2x00/rt73usb.c +++ b/drivers/net/wireless/rt2x00/rt73usb.c @@ -2001,6 +2001,12 @@ static int rt73usb_beacon_update(struct ieee80211_hw *hw, struct sk_buff *skb) REGISTER_TIMEOUT32(skb->len)); rt73usb_kick_tx_queue(rt2x00dev, QID_BEACON); + /* + * Clean up the beacon skb. + */ + dev_kfree_skb(skb); + intf->beacon->skb = NULL; + return 0; } -- cgit v1.2.3 From 14a3bf89212b5c758bd39bb4afc972c4ba6d599f Mon Sep 17 00:00:00 2001 From: Gertjan van Wingerde Date: Mon, 16 Jun 2008 19:55:43 +0200 Subject: rt2x00: Convert rt2x00 to use generic DMA-mapping API At the same time clean up the device administration a bit, by storing a pointer to struct device instead of a void pointer that is dependent on the type of device. The normal PCI and USB subsystem provided macros can be used to convert the device pointer to the right type. This makes the rt2x00 driver a bit more type-safe. Signed-off-by: Gertjan van Wingerde Signed-off-by: Ivo van Doorn Signed-off-by: John W. Linville --- drivers/net/wireless/rt2x00/rt2400pci.c | 2 +- drivers/net/wireless/rt2x00/rt2500pci.c | 2 +- drivers/net/wireless/rt2x00/rt2500usb.c | 5 +++-- drivers/net/wireless/rt2x00/rt2x00.h | 6 +----- drivers/net/wireless/rt2x00/rt2x00pci.c | 19 +++++++++---------- drivers/net/wireless/rt2x00/rt2x00usb.c | 11 +++++++---- drivers/net/wireless/rt2x00/rt61pci.c | 4 ++-- drivers/net/wireless/rt2x00/rt73usb.c | 2 +- 8 files changed, 25 insertions(+), 26 deletions(-) (limited to 'drivers/net/wireless') diff --git a/drivers/net/wireless/rt2x00/rt2400pci.c b/drivers/net/wireless/rt2x00/rt2400pci.c index bb3d83560d0..76ec1514fa4 100644 --- a/drivers/net/wireless/rt2x00/rt2400pci.c +++ b/drivers/net/wireless/rt2x00/rt2400pci.c @@ -1366,7 +1366,7 @@ static void rt2400pci_probe_hw_mode(struct rt2x00_dev *rt2x00dev) IEEE80211_HW_SIGNAL_DBM; rt2x00dev->hw->extra_tx_headroom = 0; - SET_IEEE80211_DEV(rt2x00dev->hw, &rt2x00dev_pci(rt2x00dev)->dev); + SET_IEEE80211_DEV(rt2x00dev->hw, rt2x00dev->dev); SET_IEEE80211_PERM_ADDR(rt2x00dev->hw, rt2x00_eeprom_addr(rt2x00dev, EEPROM_MAC_ADDR_0)); diff --git a/drivers/net/wireless/rt2x00/rt2500pci.c b/drivers/net/wireless/rt2x00/rt2500pci.c index 3c956b91c4e..5f0117f9a88 100644 --- a/drivers/net/wireless/rt2x00/rt2500pci.c +++ b/drivers/net/wireless/rt2x00/rt2500pci.c @@ -1688,7 +1688,7 @@ static void rt2500pci_probe_hw_mode(struct rt2x00_dev *rt2x00dev) rt2x00dev->hw->extra_tx_headroom = 0; - SET_IEEE80211_DEV(rt2x00dev->hw, &rt2x00dev_pci(rt2x00dev)->dev); + SET_IEEE80211_DEV(rt2x00dev->hw, rt2x00dev->dev); SET_IEEE80211_PERM_ADDR(rt2x00dev->hw, rt2x00_eeprom_addr(rt2x00dev, EEPROM_MAC_ADDR_0)); diff --git a/drivers/net/wireless/rt2x00/rt2500usb.c b/drivers/net/wireless/rt2x00/rt2500usb.c index 9851cefaabf..6b6e7b93d2a 100644 --- a/drivers/net/wireless/rt2x00/rt2500usb.c +++ b/drivers/net/wireless/rt2x00/rt2500usb.c @@ -1588,7 +1588,7 @@ static void rt2500usb_probe_hw_mode(struct rt2x00_dev *rt2x00dev) rt2x00dev->hw->extra_tx_headroom = TXD_DESC_SIZE; - SET_IEEE80211_DEV(rt2x00dev->hw, &rt2x00dev_usb(rt2x00dev)->dev); + SET_IEEE80211_DEV(rt2x00dev->hw, rt2x00dev->dev); SET_IEEE80211_PERM_ADDR(rt2x00dev->hw, rt2x00_eeprom_addr(rt2x00dev, EEPROM_MAC_ADDR_0)); @@ -1672,7 +1672,8 @@ static int rt2500usb_probe_hw(struct rt2x00_dev *rt2x00dev) static int rt2500usb_beacon_update(struct ieee80211_hw *hw, struct sk_buff *skb) { struct rt2x00_dev *rt2x00dev = hw->priv; - struct usb_device *usb_dev = rt2x00dev_usb_dev(rt2x00dev); + struct usb_device *usb_dev = + interface_to_usbdev(to_usb_interface(rt2x00dev->dev)); struct ieee80211_tx_info *tx_info = IEEE80211_SKB_CB(skb); struct rt2x00_intf *intf = vif_to_intf(tx_info->control.vif); struct queue_entry_priv_usb_bcn *bcn_priv; diff --git a/drivers/net/wireless/rt2x00/rt2x00.h b/drivers/net/wireless/rt2x00/rt2x00.h index 21fd9b40be8..8d45235ecc3 100644 --- a/drivers/net/wireless/rt2x00/rt2x00.h +++ b/drivers/net/wireless/rt2x00/rt2x00.h @@ -625,11 +625,7 @@ struct rt2x00_dev { * When accessing this variable, the rt2x00dev_{pci,usb} * macro's should be used for correct typecasting. */ - void *dev; -#define rt2x00dev_pci(__dev) ( (struct pci_dev *)(__dev)->dev ) -#define rt2x00dev_usb(__dev) ( (struct usb_interface *)(__dev)->dev ) -#define rt2x00dev_usb_dev(__dev)\ - ( (struct usb_device *)interface_to_usbdev(rt2x00dev_usb(__dev)) ) + struct device *dev; /* * Callback functions. diff --git a/drivers/net/wireless/rt2x00/rt2x00pci.c b/drivers/net/wireless/rt2x00/rt2x00pci.c index 8d6ad18d389..d6138389a5d 100644 --- a/drivers/net/wireless/rt2x00/rt2x00pci.c +++ b/drivers/net/wireless/rt2x00/rt2x00pci.c @@ -194,7 +194,6 @@ EXPORT_SYMBOL_GPL(rt2x00pci_txdone); static int rt2x00pci_alloc_queue_dma(struct rt2x00_dev *rt2x00dev, struct data_queue *queue) { - struct pci_dev *pci_dev = rt2x00dev_pci(rt2x00dev); struct queue_entry_priv_pci *entry_priv; void *addr; dma_addr_t dma; @@ -203,7 +202,8 @@ static int rt2x00pci_alloc_queue_dma(struct rt2x00_dev *rt2x00dev, /* * Allocate DMA memory for descriptor and buffer. */ - addr = pci_alloc_consistent(pci_dev, dma_size(queue), &dma); + addr = dma_alloc_coherent(rt2x00dev->dev, dma_size(queue), &dma, + GFP_KERNEL | GFP_DMA); if (!addr) return -ENOMEM; @@ -226,19 +226,18 @@ static int rt2x00pci_alloc_queue_dma(struct rt2x00_dev *rt2x00dev, static void rt2x00pci_free_queue_dma(struct rt2x00_dev *rt2x00dev, struct data_queue *queue) { - struct pci_dev *pci_dev = rt2x00dev_pci(rt2x00dev); struct queue_entry_priv_pci *entry_priv = queue->entries[0].priv_data; if (entry_priv->data) - pci_free_consistent(pci_dev, dma_size(queue), - entry_priv->data, entry_priv->data_dma); + dma_free_coherent(rt2x00dev->dev, dma_size(queue), + entry_priv->data, entry_priv->data_dma); entry_priv->data = NULL; } int rt2x00pci_initialize(struct rt2x00_dev *rt2x00dev) { - struct pci_dev *pci_dev = rt2x00dev_pci(rt2x00dev); + struct pci_dev *pci_dev = to_pci_dev(rt2x00dev->dev); struct data_queue *queue; int status; @@ -279,7 +278,7 @@ void rt2x00pci_uninitialize(struct rt2x00_dev *rt2x00dev) /* * Free irq line. */ - free_irq(rt2x00dev_pci(rt2x00dev)->irq, rt2x00dev); + free_irq(to_pci_dev(rt2x00dev->dev)->irq, rt2x00dev); /* * Free DMA @@ -308,7 +307,7 @@ static void rt2x00pci_free_reg(struct rt2x00_dev *rt2x00dev) static int rt2x00pci_alloc_reg(struct rt2x00_dev *rt2x00dev) { - struct pci_dev *pci_dev = rt2x00dev_pci(rt2x00dev); + struct pci_dev *pci_dev = to_pci_dev(rt2x00dev->dev); rt2x00dev->csr.base = ioremap(pci_resource_start(pci_dev, 0), pci_resource_len(pci_dev, 0)); @@ -357,7 +356,7 @@ int rt2x00pci_probe(struct pci_dev *pci_dev, const struct pci_device_id *id) if (pci_set_mwi(pci_dev)) ERROR_PROBE("MWI not available.\n"); - if (pci_set_dma_mask(pci_dev, DMA_32BIT_MASK)) { + if (dma_set_mask(&pci_dev->dev, DMA_32BIT_MASK)) { ERROR_PROBE("PCI DMA not supported.\n"); retval = -EIO; goto exit_disable_device; @@ -373,7 +372,7 @@ int rt2x00pci_probe(struct pci_dev *pci_dev, const struct pci_device_id *id) pci_set_drvdata(pci_dev, hw); rt2x00dev = hw->priv; - rt2x00dev->dev = pci_dev; + rt2x00dev->dev = &pci_dev->dev; rt2x00dev->ops = ops; rt2x00dev->hw = hw; diff --git a/drivers/net/wireless/rt2x00/rt2x00usb.c b/drivers/net/wireless/rt2x00/rt2x00usb.c index 3080969ae5b..f91901ffda5 100644 --- a/drivers/net/wireless/rt2x00/rt2x00usb.c +++ b/drivers/net/wireless/rt2x00/rt2x00usb.c @@ -40,7 +40,8 @@ int rt2x00usb_vendor_request(struct rt2x00_dev *rt2x00dev, void *buffer, const u16 buffer_length, const int timeout) { - struct usb_device *usb_dev = rt2x00dev_usb_dev(rt2x00dev); + struct usb_device *usb_dev = + interface_to_usbdev(to_usb_interface(rt2x00dev->dev)); int status; unsigned int i; unsigned int pipe = @@ -176,7 +177,8 @@ static void rt2x00usb_interrupt_txdone(struct urb *urb) int rt2x00usb_write_tx_data(struct queue_entry *entry) { struct rt2x00_dev *rt2x00dev = entry->queue->rt2x00dev; - struct usb_device *usb_dev = rt2x00dev_usb_dev(rt2x00dev); + struct usb_device *usb_dev = + interface_to_usbdev(to_usb_interface(rt2x00dev->dev)); struct queue_entry_priv_usb *entry_priv = entry->priv_data; struct skb_frame_desc *skbdesc; u32 length; @@ -364,7 +366,8 @@ EXPORT_SYMBOL_GPL(rt2x00usb_disable_radio); void rt2x00usb_init_rxentry(struct rt2x00_dev *rt2x00dev, struct queue_entry *entry) { - struct usb_device *usb_dev = rt2x00dev_usb_dev(rt2x00dev); + struct usb_device *usb_dev = + interface_to_usbdev(to_usb_interface(rt2x00dev->dev)); struct queue_entry_priv_usb *entry_priv = entry->priv_data; usb_fill_bulk_urb(entry_priv->urb, usb_dev, @@ -558,7 +561,7 @@ int rt2x00usb_probe(struct usb_interface *usb_intf, usb_set_intfdata(usb_intf, hw); rt2x00dev = hw->priv; - rt2x00dev->dev = usb_intf; + rt2x00dev->dev = &usb_intf->dev; rt2x00dev->ops = ops; rt2x00dev->hw = hw; mutex_init(&rt2x00dev->usb_cache_mutex); diff --git a/drivers/net/wireless/rt2x00/rt61pci.c b/drivers/net/wireless/rt2x00/rt61pci.c index 27f30ae8f52..2a7f3062035 100644 --- a/drivers/net/wireless/rt2x00/rt61pci.c +++ b/drivers/net/wireless/rt2x00/rt61pci.c @@ -1973,7 +1973,7 @@ static int rt61pci_init_eeprom(struct rt2x00_dev *rt2x00dev) * To determine the RT chip we have to read the * PCI header of the device. */ - pci_read_config_word(rt2x00dev_pci(rt2x00dev), + pci_read_config_word(to_pci_dev(rt2x00dev->dev), PCI_CONFIG_HEADER_DEVICE, &device); value = rt2x00_get_field16(eeprom, EEPROM_ANTENNA_RF_TYPE); rt2x00pci_register_read(rt2x00dev, MAC_CSR0, ®); @@ -2239,7 +2239,7 @@ static void rt61pci_probe_hw_mode(struct rt2x00_dev *rt2x00dev) IEEE80211_HW_SIGNAL_DBM; rt2x00dev->hw->extra_tx_headroom = 0; - SET_IEEE80211_DEV(rt2x00dev->hw, &rt2x00dev_pci(rt2x00dev)->dev); + SET_IEEE80211_DEV(rt2x00dev->hw, rt2x00dev->dev); SET_IEEE80211_PERM_ADDR(rt2x00dev->hw, rt2x00_eeprom_addr(rt2x00dev, EEPROM_MAC_ADDR_0)); diff --git a/drivers/net/wireless/rt2x00/rt73usb.c b/drivers/net/wireless/rt2x00/rt73usb.c index 42b7e98b2d2..ead6db04d60 100644 --- a/drivers/net/wireless/rt2x00/rt73usb.c +++ b/drivers/net/wireless/rt2x00/rt73usb.c @@ -1821,7 +1821,7 @@ static void rt73usb_probe_hw_mode(struct rt2x00_dev *rt2x00dev) IEEE80211_HW_SIGNAL_DBM; rt2x00dev->hw->extra_tx_headroom = TXD_DESC_SIZE; - SET_IEEE80211_DEV(rt2x00dev->hw, &rt2x00dev_usb(rt2x00dev)->dev); + SET_IEEE80211_DEV(rt2x00dev->hw, rt2x00dev->dev); SET_IEEE80211_PERM_ADDR(rt2x00dev->hw, rt2x00_eeprom_addr(rt2x00dev, EEPROM_MAC_ADDR_0)); -- cgit v1.2.3 From 30caa6e3d586442f7c3ad081260ee1b22bb123de Mon Sep 17 00:00:00 2001 From: Gertjan van Wingerde Date: Mon, 16 Jun 2008 19:56:08 +0200 Subject: rt2x00: Centralize allocation of RX skbs. In preparation of replacing the statically allocated DMA buffers with dynamically mapped skbs, centralize the allocation of RX skbs to rt2x00queue.c and let rt2x00pci already use them. Signed-off-by: Gertjan van Wingerde Signed-off-by: Ivo van Doorn Signed-off-by: John W. Linville --- drivers/net/wireless/rt2x00/rt2x00.h | 10 +++- drivers/net/wireless/rt2x00/rt2x00pci.c | 77 ++++++++++++++++++++----------- drivers/net/wireless/rt2x00/rt2x00queue.c | 71 +++++++++++++++++++++------- drivers/net/wireless/rt2x00/rt2x00usb.c | 21 +-------- 4 files changed, 113 insertions(+), 66 deletions(-) (limited to 'drivers/net/wireless') diff --git a/drivers/net/wireless/rt2x00/rt2x00.h b/drivers/net/wireless/rt2x00/rt2x00.h index 8d45235ecc3..08e8b0a005a 100644 --- a/drivers/net/wireless/rt2x00/rt2x00.h +++ b/drivers/net/wireless/rt2x00/rt2x00.h @@ -899,10 +899,16 @@ static inline u16 get_duration_res(const unsigned int size, const u8 rate) } /** - * rt2x00queue_alloc_rxskb - allocate a skb for RX purposes. + * rt2x00queue_alloc_skb - allocate a skb. * @queue: The queue for which the skb will be applicable. */ -struct sk_buff *rt2x00queue_alloc_rxskb(struct data_queue *queue); +struct sk_buff *rt2x00queue_alloc_skb(struct data_queue *queue); + +/** + * rt2x00queue_free_skb - free a skb + * @skb: The skb to free. + */ +void rt2x00queue_free_skb(struct sk_buff *skb); /** * rt2x00queue_create_tx_descriptor - Create TX descriptor from mac80211 input diff --git a/drivers/net/wireless/rt2x00/rt2x00pci.c b/drivers/net/wireless/rt2x00/rt2x00pci.c index d6138389a5d..e7e3a459b66 100644 --- a/drivers/net/wireless/rt2x00/rt2x00pci.c +++ b/drivers/net/wireless/rt2x00/rt2x00pci.c @@ -74,13 +74,59 @@ EXPORT_SYMBOL_GPL(rt2x00pci_write_tx_data); /* * TX/RX data handlers. */ +static void rt2x00pci_rxdone_entry(struct rt2x00_dev *rt2x00dev, + struct queue_entry *entry) +{ + struct sk_buff *skb; + struct skb_frame_desc *skbdesc; + struct rxdone_entry_desc rxdesc; + struct queue_entry_priv_pci *entry_priv = entry->priv_data; + + /* + * Allocate a new sk_buffer. If no new buffer available, drop the + * received frame and reuse the existing buffer. + */ + skb = rt2x00queue_alloc_skb(entry->queue); + if (!skb) + return; + + /* + * Extract the RXD details. + */ + memset(&rxdesc, 0, sizeof(rxdesc)); + rt2x00dev->ops->lib->fill_rxdone(entry, &rxdesc); + + /* + * Copy the received data to the entries' skb. + */ + memcpy(entry->skb->data, entry_priv->data, rxdesc.size); + skb_trim(entry->skb, rxdesc.size); + + /* + * Fill in skb descriptor + */ + skbdesc = get_skb_frame_desc(entry->skb); + memset(skbdesc, 0, sizeof(*skbdesc)); + skbdesc->desc = entry_priv->desc; + skbdesc->desc_len = entry->queue->desc_size; + skbdesc->entry = entry; + + /* + * Send the frame to rt2x00lib for further processing. + */ + rt2x00lib_rxdone(entry, &rxdesc); + + /* + * Replace the entries' skb with the newly allocated one. + */ + entry->skb = skb; +} + void rt2x00pci_rxdone(struct rt2x00_dev *rt2x00dev) { struct data_queue *queue = rt2x00dev->rx; struct queue_entry *entry; struct queue_entry_priv_pci *entry_priv; - struct skb_frame_desc *skbdesc; - struct rxdone_entry_desc rxdesc; u32 word; while (1) { @@ -91,32 +137,7 @@ void rt2x00pci_rxdone(struct rt2x00_dev *rt2x00dev) if (rt2x00_get_field32(word, RXD_ENTRY_OWNER_NIC)) break; - memset(&rxdesc, 0, sizeof(rxdesc)); - rt2x00dev->ops->lib->fill_rxdone(entry, &rxdesc); - - /* - * Allocate the sk_buffer and copy all data into it. - */ - entry->skb = rt2x00queue_alloc_rxskb(queue); - if (!entry->skb) - return; - - memcpy(entry->skb->data, entry_priv->data, rxdesc.size); - skb_trim(entry->skb, rxdesc.size); - - /* - * Fill in skb descriptor - */ - skbdesc = get_skb_frame_desc(entry->skb); - memset(skbdesc, 0, sizeof(*skbdesc)); - skbdesc->desc = entry_priv->desc; - skbdesc->desc_len = queue->desc_size; - skbdesc->entry = entry; - - /* - * Send the frame to rt2x00lib for further processing. - */ - rt2x00lib_rxdone(entry, &rxdesc); + rt2x00pci_rxdone_entry(rt2x00dev, entry); if (test_bit(DEVICE_ENABLED_RADIO, &queue->rt2x00dev->flags)) { rt2x00_set_field32(&word, RXD_ENTRY_OWNER_NIC, 1); diff --git a/drivers/net/wireless/rt2x00/rt2x00queue.c b/drivers/net/wireless/rt2x00/rt2x00queue.c index 15660b588a1..278f1a1ac92 100644 --- a/drivers/net/wireless/rt2x00/rt2x00queue.c +++ b/drivers/net/wireless/rt2x00/rt2x00queue.c @@ -29,7 +29,7 @@ #include "rt2x00.h" #include "rt2x00lib.h" -struct sk_buff *rt2x00queue_alloc_rxskb(struct data_queue *queue) +struct sk_buff *rt2x00queue_alloc_skb(struct data_queue *queue) { struct sk_buff *skb; unsigned int frame_size; @@ -42,17 +42,10 @@ struct sk_buff *rt2x00queue_alloc_rxskb(struct data_queue *queue) frame_size = queue->data_size + queue->desc_size; /* - * For the allocation we should keep a few things in mind: - * 1) 4byte alignment of 802.11 payload - * - * For (1) we need at most 4 bytes to guarentee the correct - * alignment. We are going to optimize the fact that the chance - * that the 802.11 header_size % 4 == 2 is much bigger then - * anything else. However since we need to move the frame up - * to 3 bytes to the front, which means we need to preallocate - * 6 bytes. + * Reserve a few bytes extra headroom to allow drivers some moving + * space (e.g. for alignment), while keeping the skb aligned. */ - reserved_size = 6; + reserved_size = 8; /* * Allocate skbuffer. @@ -66,7 +59,13 @@ struct sk_buff *rt2x00queue_alloc_rxskb(struct data_queue *queue) return skb; } -EXPORT_SYMBOL_GPL(rt2x00queue_alloc_rxskb); +EXPORT_SYMBOL_GPL(rt2x00queue_alloc_skb); + +void rt2x00queue_free_skb(struct sk_buff *skb) +{ + dev_kfree_skb_any(skb); +} +EXPORT_SYMBOL_GPL(rt2x00queue_free_skb); void rt2x00queue_create_tx_descriptor(struct queue_entry *entry, struct txentry_desc *txdesc) @@ -422,12 +421,45 @@ static int rt2x00queue_alloc_entries(struct data_queue *queue, return 0; } +static void rt2x00queue_free_skbs(struct data_queue *queue) +{ + unsigned int i; + + if (!queue->entries) + return; + + for (i = 0; i < queue->limit; i++) { + if (queue->entries[i].skb) + rt2x00queue_free_skb(queue->entries[i].skb); + } +} + +static int rt2x00queue_alloc_skbs(struct data_queue *queue) +{ + unsigned int i; + struct sk_buff *skb; + + for (i = 0; i < queue->limit; i++) { + skb = rt2x00queue_alloc_skb(queue); + if (!skb) + goto exit; + + queue->entries[i].skb = skb; + } + + return 0; + +exit: + rt2x00queue_free_skbs(queue); + + return -ENOMEM; +} + int rt2x00queue_initialize(struct rt2x00_dev *rt2x00dev) { struct data_queue *queue; int status; - status = rt2x00queue_alloc_entries(rt2x00dev->rx, rt2x00dev->ops->rx); if (status) goto exit; @@ -442,11 +474,14 @@ int rt2x00queue_initialize(struct rt2x00_dev *rt2x00dev) if (status) goto exit; - if (!test_bit(DRIVER_REQUIRE_ATIM_QUEUE, &rt2x00dev->flags)) - return 0; + if (test_bit(DRIVER_REQUIRE_ATIM_QUEUE, &rt2x00dev->flags)) { + status = rt2x00queue_alloc_entries(&rt2x00dev->bcn[1], + rt2x00dev->ops->atim); + if (status) + goto exit; + } - status = rt2x00queue_alloc_entries(&rt2x00dev->bcn[1], - rt2x00dev->ops->atim); + status = rt2x00queue_alloc_skbs(rt2x00dev->rx); if (status) goto exit; @@ -464,6 +499,8 @@ void rt2x00queue_uninitialize(struct rt2x00_dev *rt2x00dev) { struct data_queue *queue; + rt2x00queue_free_skbs(rt2x00dev->rx); + queue_for_each(rt2x00dev, queue) { kfree(queue->entries); queue->entries = NULL; diff --git a/drivers/net/wireless/rt2x00/rt2x00usb.c b/drivers/net/wireless/rt2x00/rt2x00usb.c index f91901ffda5..29dba86c8cf 100644 --- a/drivers/net/wireless/rt2x00/rt2x00usb.c +++ b/drivers/net/wireless/rt2x00/rt2x00usb.c @@ -300,7 +300,7 @@ static void rt2x00usb_interrupt_rxdone(struct urb *urb) * If allocation fails, we should drop the current frame * so we can recycle the existing sk buffer for the new frame. */ - skb = rt2x00queue_alloc_rxskb(entry->queue); + skb = rt2x00queue_alloc_skb(entry->queue); if (!skb) goto skip_entry; @@ -434,8 +434,6 @@ static void rt2x00usb_free_urb(struct rt2x00_dev *rt2x00dev, entry_priv = queue->entries[i].priv_data; usb_kill_urb(entry_priv->urb); usb_free_urb(entry_priv->urb); - if (queue->entries[i].skb) - kfree_skb(queue->entries[i].skb); } /* @@ -457,10 +455,7 @@ static void rt2x00usb_free_urb(struct rt2x00_dev *rt2x00dev, int rt2x00usb_initialize(struct rt2x00_dev *rt2x00dev) { struct data_queue *queue; - struct sk_buff *skb; - unsigned int entry_size; - unsigned int i; - int uninitialized_var(status); + int status; /* * Allocate DMA @@ -471,18 +466,6 @@ int rt2x00usb_initialize(struct rt2x00_dev *rt2x00dev) goto exit; } - /* - * For the RX queue, skb's should be allocated. - */ - entry_size = rt2x00dev->rx->data_size + rt2x00dev->rx->desc_size; - for (i = 0; i < rt2x00dev->rx->limit; i++) { - skb = rt2x00queue_alloc_rxskb(rt2x00dev->rx); - if (!skb) - goto exit; - - rt2x00dev->rx->entries[i].skb = skb; - } - return 0; exit: -- cgit v1.2.3 From c4da004857056e6ee034c4110ccdcba659077b7e Mon Sep 17 00:00:00 2001 From: Gertjan van Wingerde Date: Mon, 16 Jun 2008 19:56:31 +0200 Subject: rt2x00: Replace statically allocated DMA buffers with mapped skb's. The current PCI drivers require a lot of pre-allocated DMA buffers. Reduce this by using dynamically mapped skb's (using pci_map_single) instead of the pre- allocated DMA buffers that are allocated at device start-up time. At the same time move common RX path code into rt2x00lib from rt2x00pci and rt2x00usb, as the RX paths now are now almost the same. Signed-off-by: Gertjan van Wingerde Signed-off-by: Ivo van Doorn Signed-off-by: John W. Linville --- drivers/net/wireless/rt2x00/rt2400pci.c | 13 ++-- drivers/net/wireless/rt2x00/rt2500pci.c | 10 ++- drivers/net/wireless/rt2x00/rt2x00.h | 28 +++++-- drivers/net/wireless/rt2x00/rt2x00dev.c | 64 ++++++++++----- drivers/net/wireless/rt2x00/rt2x00pci.c | 125 ++++++++---------------------- drivers/net/wireless/rt2x00/rt2x00pci.h | 3 - drivers/net/wireless/rt2x00/rt2x00queue.c | 85 ++++++++++++++++---- drivers/net/wireless/rt2x00/rt2x00queue.h | 16 ++-- drivers/net/wireless/rt2x00/rt2x00usb.c | 27 +------ drivers/net/wireless/rt2x00/rt61pci.c | 9 ++- 10 files changed, 204 insertions(+), 176 deletions(-) (limited to 'drivers/net/wireless') diff --git a/drivers/net/wireless/rt2x00/rt2400pci.c b/drivers/net/wireless/rt2x00/rt2400pci.c index 76ec1514fa4..de2dd336f23 100644 --- a/drivers/net/wireless/rt2x00/rt2400pci.c +++ b/drivers/net/wireless/rt2x00/rt2400pci.c @@ -632,15 +632,15 @@ static void rt2400pci_init_rxentry(struct rt2x00_dev *rt2x00dev, struct queue_entry *entry) { struct queue_entry_priv_pci *entry_priv = entry->priv_data; + struct skb_frame_desc *skbdesc = get_skb_frame_desc(entry->skb); u32 word; rt2x00_desc_read(entry_priv->desc, 2, &word); - rt2x00_set_field32(&word, RXD_W2_BUFFER_LENGTH, - entry->queue->data_size); + rt2x00_set_field32(&word, RXD_W2_BUFFER_LENGTH, entry->skb->len); rt2x00_desc_write(entry_priv->desc, 2, word); rt2x00_desc_read(entry_priv->desc, 1, &word); - rt2x00_set_field32(&word, RXD_W1_BUFFER_ADDRESS, entry_priv->data_dma); + rt2x00_set_field32(&word, RXD_W1_BUFFER_ADDRESS, skbdesc->skb_dma); rt2x00_desc_write(entry_priv->desc, 1, word); rt2x00_desc_read(entry_priv->desc, 0, &word); @@ -1012,7 +1012,7 @@ static void rt2400pci_write_tx_desc(struct rt2x00_dev *rt2x00dev, * Start writing the descriptor words. */ rt2x00_desc_read(entry_priv->desc, 1, &word); - rt2x00_set_field32(&word, TXD_W1_BUFFER_ADDRESS, entry_priv->data_dma); + rt2x00_set_field32(&word, TXD_W1_BUFFER_ADDRESS, skbdesc->skb_dma); rt2x00_desc_write(entry_priv->desc, 1, word); rt2x00_desc_read(txd, 2, &word); @@ -1412,9 +1412,10 @@ static int rt2400pci_probe_hw(struct rt2x00_dev *rt2x00dev) rt2400pci_probe_hw_mode(rt2x00dev); /* - * This device requires the atim queue + * This device requires the atim queue and DMA-mapped skbs. */ __set_bit(DRIVER_REQUIRE_ATIM_QUEUE, &rt2x00dev->flags); + __set_bit(DRIVER_REQUIRE_DMA, &rt2x00dev->flags); /* * Set the rssi offset. @@ -1526,7 +1527,7 @@ static int rt2400pci_beacon_update(struct ieee80211_hw *hw, struct sk_buff *skb) * Write entire beacon with descriptor to register, * and kick the beacon generator. */ - memcpy(entry_priv->data, skb->data, skb->len); + rt2x00queue_map_txskb(rt2x00dev, intf->beacon->skb); rt2x00queue_write_tx_descriptor(intf->beacon, &txdesc); rt2x00dev->ops->lib->kick_tx_queue(rt2x00dev, QID_BEACON); diff --git a/drivers/net/wireless/rt2x00/rt2500pci.c b/drivers/net/wireless/rt2x00/rt2500pci.c index 5f0117f9a88..5077b62dcc5 100644 --- a/drivers/net/wireless/rt2x00/rt2500pci.c +++ b/drivers/net/wireless/rt2x00/rt2500pci.c @@ -727,10 +727,11 @@ static void rt2500pci_init_rxentry(struct rt2x00_dev *rt2x00dev, struct queue_entry *entry) { struct queue_entry_priv_pci *entry_priv = entry->priv_data; + struct skb_frame_desc *skbdesc = get_skb_frame_desc(entry->skb); u32 word; rt2x00_desc_read(entry_priv->desc, 1, &word); - rt2x00_set_field32(&word, RXD_W1_BUFFER_ADDRESS, entry_priv->data_dma); + rt2x00_set_field32(&word, RXD_W1_BUFFER_ADDRESS, skbdesc->skb_dma); rt2x00_desc_write(entry_priv->desc, 1, word); rt2x00_desc_read(entry_priv->desc, 0, &word); @@ -1171,7 +1172,7 @@ static void rt2500pci_write_tx_desc(struct rt2x00_dev *rt2x00dev, * Start writing the descriptor words. */ rt2x00_desc_read(entry_priv->desc, 1, &word); - rt2x00_set_field32(&word, TXD_W1_BUFFER_ADDRESS, entry_priv->data_dma); + rt2x00_set_field32(&word, TXD_W1_BUFFER_ADDRESS, skbdesc->skb_dma); rt2x00_desc_write(entry_priv->desc, 1, word); rt2x00_desc_read(txd, 2, &word); @@ -1752,9 +1753,10 @@ static int rt2500pci_probe_hw(struct rt2x00_dev *rt2x00dev) rt2500pci_probe_hw_mode(rt2x00dev); /* - * This device requires the atim queue + * This device requires the atim queue and DMA-mapped skbs. */ __set_bit(DRIVER_REQUIRE_ATIM_QUEUE, &rt2x00dev->flags); + __set_bit(DRIVER_REQUIRE_DMA, &rt2x00dev->flags); /* * Set the rssi offset. @@ -1842,7 +1844,7 @@ static int rt2500pci_beacon_update(struct ieee80211_hw *hw, struct sk_buff *skb) * Write entire beacon with descriptor to register, * and kick the beacon generator. */ - memcpy(entry_priv->data, skb->data, skb->len); + rt2x00queue_map_txskb(rt2x00dev, intf->beacon->skb); rt2x00queue_write_tx_descriptor(intf->beacon, &txdesc); rt2x00dev->ops->lib->kick_tx_queue(rt2x00dev, QID_BEACON); diff --git a/drivers/net/wireless/rt2x00/rt2x00.h b/drivers/net/wireless/rt2x00/rt2x00.h index 08e8b0a005a..28c9026bb56 100644 --- a/drivers/net/wireless/rt2x00/rt2x00.h +++ b/drivers/net/wireless/rt2x00/rt2x00.h @@ -601,6 +601,7 @@ enum rt2x00_flags { DRIVER_REQUIRE_BEACON_GUARD, DRIVER_REQUIRE_ATIM_QUEUE, DRIVER_REQUIRE_SCHEDULED, + DRIVER_REQUIRE_DMA, /* * Driver configuration @@ -899,16 +900,33 @@ static inline u16 get_duration_res(const unsigned int size, const u8 rate) } /** - * rt2x00queue_alloc_skb - allocate a skb. + * rt2x00queue_alloc_rxskb - allocate a skb for RX purposes. + * @rt2x00dev: Pointer to &struct rt2x00_dev. * @queue: The queue for which the skb will be applicable. */ -struct sk_buff *rt2x00queue_alloc_skb(struct data_queue *queue); +struct sk_buff *rt2x00queue_alloc_rxskb(struct rt2x00_dev *rt2x00dev, + struct queue_entry *entry); + +/** + * rt2x00queue_map_txskb - Map a skb into DMA for TX purposes. + * @rt2x00dev: Pointer to &struct rt2x00_dev. + * @skb: The skb to map. + */ +void rt2x00queue_map_txskb(struct rt2x00_dev *rt2x00dev, struct sk_buff *skb); + +/** + * rt2x00queue_unmap_skb - Unmap a skb from DMA. + * @rt2x00dev: Pointer to &struct rt2x00_dev. + * @skb: The skb to unmap. + */ +void rt2x00queue_unmap_skb(struct rt2x00_dev *rt2x00dev, struct sk_buff *skb); /** * rt2x00queue_free_skb - free a skb + * @rt2x00dev: Pointer to &struct rt2x00_dev. * @skb: The skb to free. */ -void rt2x00queue_free_skb(struct sk_buff *skb); +void rt2x00queue_free_skb(struct rt2x00_dev *rt2x00dev, struct sk_buff *skb); /** * rt2x00queue_create_tx_descriptor - Create TX descriptor from mac80211 input @@ -977,8 +995,8 @@ void rt2x00queue_index_inc(struct data_queue *queue, enum queue_index index); void rt2x00lib_beacondone(struct rt2x00_dev *rt2x00dev); void rt2x00lib_txdone(struct queue_entry *entry, struct txdone_entry_desc *txdesc); -void rt2x00lib_rxdone(struct queue_entry *entry, - struct rxdone_entry_desc *rxdesc); +void rt2x00lib_rxdone(struct rt2x00_dev *rt2x00dev, + struct queue_entry *entry); /* * mac80211 handlers. diff --git a/drivers/net/wireless/rt2x00/rt2x00dev.c b/drivers/net/wireless/rt2x00/rt2x00dev.c index b8e0c4c3ed0..99b14ba99d9 100644 --- a/drivers/net/wireless/rt2x00/rt2x00dev.c +++ b/drivers/net/wireless/rt2x00/rt2x00dev.c @@ -468,6 +468,7 @@ static void rt2x00lib_intf_scheduled(struct work_struct *work) static void rt2x00lib_beacondone_iter(void *data, u8 *mac, struct ieee80211_vif *vif) { + struct rt2x00_dev *rt2x00dev = data; struct rt2x00_intf *intf = vif_to_intf(vif); if (vif->type != IEEE80211_IF_TYPE_AP && @@ -477,7 +478,7 @@ static void rt2x00lib_beacondone_iter(void *data, u8 *mac, /* * Clean up the beacon skb. */ - dev_kfree_skb_irq(intf->beacon->skb); + rt2x00queue_free_skb(rt2x00dev, intf->beacon->skb); intf->beacon->skb = NULL; spin_lock(&intf->lock); @@ -555,34 +556,55 @@ void rt2x00lib_txdone(struct queue_entry *entry, } EXPORT_SYMBOL_GPL(rt2x00lib_txdone); -void rt2x00lib_rxdone(struct queue_entry *entry, - struct rxdone_entry_desc *rxdesc) +void rt2x00lib_rxdone(struct rt2x00_dev *rt2x00dev, + struct queue_entry *entry) { - struct rt2x00_dev *rt2x00dev = entry->queue->rt2x00dev; + struct rxdone_entry_desc rxdesc; + struct sk_buff *skb; struct ieee80211_rx_status *rx_status = &rt2x00dev->rx_status; - unsigned int header_size = ieee80211_get_hdrlen_from_skb(entry->skb); struct ieee80211_supported_band *sband; struct ieee80211_hdr *hdr; const struct rt2x00_rate *rate; + unsigned int header_size; unsigned int align; unsigned int i; int idx = -1; + /* + * Allocate a new sk_buffer. If no new buffer available, drop the + * received frame and reuse the existing buffer. + */ + skb = rt2x00queue_alloc_rxskb(rt2x00dev, entry); + if (!skb) + return; + + /* + * Unmap the skb. + */ + rt2x00queue_unmap_skb(rt2x00dev, entry->skb); + + /* + * Extract the RXD details. + */ + memset(&rxdesc, 0, sizeof(rxdesc)); + rt2x00dev->ops->lib->fill_rxdone(entry, &rxdesc); + /* * The data behind the ieee80211 header must be * aligned on a 4 byte boundary. */ + header_size = ieee80211_get_hdrlen_from_skb(entry->skb); align = ((unsigned long)(entry->skb->data + header_size)) & 3; if (align) { skb_push(entry->skb, align); /* Move entire frame in 1 command */ memmove(entry->skb->data, entry->skb->data + align, - rxdesc->size); + rxdesc.size); } /* Update data pointers, trim buffer to correct size */ - skb_trim(entry->skb, rxdesc->size); + skb_trim(entry->skb, rxdesc.size); /* * Update RX statistics. @@ -591,10 +613,10 @@ void rt2x00lib_rxdone(struct queue_entry *entry, for (i = 0; i < sband->n_bitrates; i++) { rate = rt2x00_get_rate(sband->bitrates[i].hw_value); - if (((rxdesc->dev_flags & RXDONE_SIGNAL_PLCP) && - (rate->plcp == rxdesc->signal)) || - (!(rxdesc->dev_flags & RXDONE_SIGNAL_PLCP) && - (rate->bitrate == rxdesc->signal))) { + if (((rxdesc.dev_flags & RXDONE_SIGNAL_PLCP) && + (rate->plcp == rxdesc.signal)) || + (!(rxdesc.dev_flags & RXDONE_SIGNAL_PLCP) && + (rate->bitrate == rxdesc.signal))) { idx = i; break; } @@ -602,8 +624,8 @@ void rt2x00lib_rxdone(struct queue_entry *entry, if (idx < 0) { WARNING(rt2x00dev, "Frame received with unrecognized signal," - "signal=0x%.2x, plcp=%d.\n", rxdesc->signal, - !!(rxdesc->dev_flags & RXDONE_SIGNAL_PLCP)); + "signal=0x%.2x, plcp=%d.\n", rxdesc.signal, + !!(rxdesc.dev_flags & RXDONE_SIGNAL_PLCP)); idx = 0; } @@ -612,16 +634,16 @@ void rt2x00lib_rxdone(struct queue_entry *entry, */ hdr = (struct ieee80211_hdr *)entry->skb->data; if (ieee80211_is_beacon(hdr->frame_control) && - (rxdesc->dev_flags & RXDONE_MY_BSS)) - rt2x00lib_update_link_stats(&rt2x00dev->link, rxdesc->rssi); + (rxdesc.dev_flags & RXDONE_MY_BSS)) + rt2x00lib_update_link_stats(&rt2x00dev->link, rxdesc.rssi); rt2x00dev->link.qual.rx_success++; rx_status->rate_idx = idx; rx_status->qual = - rt2x00lib_calculate_link_signal(rt2x00dev, rxdesc->rssi); - rx_status->signal = rxdesc->rssi; - rx_status->flag = rxdesc->flags; + rt2x00lib_calculate_link_signal(rt2x00dev, rxdesc.rssi); + rx_status->signal = rxdesc.rssi; + rx_status->flag = rxdesc.flags; rx_status->antenna = rt2x00dev->link.ant.active.rx; /* @@ -630,7 +652,11 @@ void rt2x00lib_rxdone(struct queue_entry *entry, */ rt2x00debug_dump_frame(rt2x00dev, DUMP_FRAME_RXDONE, entry->skb); ieee80211_rx_irqsafe(rt2x00dev->hw, entry->skb, rx_status); - entry->skb = NULL; + + /* + * Replace the skb with the freshly allocated one. + */ + entry->skb = skb; } EXPORT_SYMBOL_GPL(rt2x00lib_rxdone); diff --git a/drivers/net/wireless/rt2x00/rt2x00pci.c b/drivers/net/wireless/rt2x00/rt2x00pci.c index e7e3a459b66..f9d0d76f870 100644 --- a/drivers/net/wireless/rt2x00/rt2x00pci.c +++ b/drivers/net/wireless/rt2x00/rt2x00pci.c @@ -65,7 +65,7 @@ int rt2x00pci_write_tx_data(struct queue_entry *entry) skbdesc->desc_len = entry->queue->desc_size; skbdesc->entry = entry; - memcpy(entry_priv->data, entry->skb->data, entry->skb->len); + rt2x00queue_map_txskb(entry->queue->rt2x00dev, entry->skb); return 0; } @@ -74,59 +74,12 @@ EXPORT_SYMBOL_GPL(rt2x00pci_write_tx_data); /* * TX/RX data handlers. */ -static void rt2x00pci_rxdone_entry(struct rt2x00_dev *rt2x00dev, - struct queue_entry *entry) -{ - struct sk_buff *skb; - struct skb_frame_desc *skbdesc; - struct rxdone_entry_desc rxdesc; - struct queue_entry_priv_pci *entry_priv = entry->priv_data; - - /* - * Allocate a new sk_buffer. If no new buffer available, drop the - * received frame and reuse the existing buffer. - */ - skb = rt2x00queue_alloc_skb(entry->queue); - if (!skb) - return; - - /* - * Extract the RXD details. - */ - memset(&rxdesc, 0, sizeof(rxdesc)); - rt2x00dev->ops->lib->fill_rxdone(entry, &rxdesc); - - /* - * Copy the received data to the entries' skb. - */ - memcpy(entry->skb->data, entry_priv->data, rxdesc.size); - skb_trim(entry->skb, rxdesc.size); - - /* - * Fill in skb descriptor - */ - skbdesc = get_skb_frame_desc(entry->skb); - memset(skbdesc, 0, sizeof(*skbdesc)); - skbdesc->desc = entry_priv->desc; - skbdesc->desc_len = entry->queue->desc_size; - skbdesc->entry = entry; - - /* - * Send the frame to rt2x00lib for further processing. - */ - rt2x00lib_rxdone(entry, &rxdesc); - - /* - * Replace the entries' skb with the newly allocated one. - */ - entry->skb = skb; -} - void rt2x00pci_rxdone(struct rt2x00_dev *rt2x00dev) { struct data_queue *queue = rt2x00dev->rx; struct queue_entry *entry; struct queue_entry_priv_pci *entry_priv; + struct skb_frame_desc *skbdesc; u32 word; while (1) { @@ -137,12 +90,22 @@ void rt2x00pci_rxdone(struct rt2x00_dev *rt2x00dev) if (rt2x00_get_field32(word, RXD_ENTRY_OWNER_NIC)) break; - rt2x00pci_rxdone_entry(rt2x00dev, entry); + /* + * Fill in desc fields of the skb descriptor + */ + skbdesc = get_skb_frame_desc(entry->skb); + skbdesc->desc = entry_priv->desc; + skbdesc->desc_len = entry->queue->desc_size; + + /* + * Send the frame to rt2x00lib for further processing. + */ + rt2x00lib_rxdone(rt2x00dev, entry); - if (test_bit(DEVICE_ENABLED_RADIO, &queue->rt2x00dev->flags)) { - rt2x00_set_field32(&word, RXD_ENTRY_OWNER_NIC, 1); - rt2x00_desc_write(entry_priv->desc, 0, word); - } + /* + * Reset the RXD for this entry. + */ + rt2x00dev->ops->lib->init_rxentry(rt2x00dev, entry); rt2x00queue_index_inc(queue, Q_INDEX); } @@ -156,6 +119,11 @@ void rt2x00pci_txdone(struct rt2x00_dev *rt2x00dev, struct queue_entry *entry, enum data_queue_qid qid = skb_get_queue_mapping(entry->skb); u32 word; + /* + * Unmap the skb. + */ + rt2x00queue_unmap_skb(rt2x00dev, entry->skb); + rt2x00lib_txdone(entry, txdesc); /* @@ -185,33 +153,6 @@ EXPORT_SYMBOL_GPL(rt2x00pci_txdone); /* * Device initialization handlers. */ -#define desc_size(__queue) \ -({ \ - ((__queue)->limit * (__queue)->desc_size);\ -}) - -#define data_size(__queue) \ -({ \ - ((__queue)->limit * (__queue)->data_size);\ -}) - -#define dma_size(__queue) \ -({ \ - data_size(__queue) + desc_size(__queue);\ -}) - -#define desc_offset(__queue, __base, __i) \ -({ \ - (__base) + data_size(__queue) + \ - ((__i) * (__queue)->desc_size); \ -}) - -#define data_offset(__queue, __base, __i) \ -({ \ - (__base) + \ - ((__i) * (__queue)->data_size); \ -}) - static int rt2x00pci_alloc_queue_dma(struct rt2x00_dev *rt2x00dev, struct data_queue *queue) { @@ -223,22 +164,21 @@ static int rt2x00pci_alloc_queue_dma(struct rt2x00_dev *rt2x00dev, /* * Allocate DMA memory for descriptor and buffer. */ - addr = dma_alloc_coherent(rt2x00dev->dev, dma_size(queue), &dma, - GFP_KERNEL | GFP_DMA); + addr = dma_alloc_coherent(rt2x00dev->dev, + queue->limit * queue->desc_size, + &dma, GFP_KERNEL | GFP_DMA); if (!addr) return -ENOMEM; - memset(addr, 0, dma_size(queue)); + memset(addr, 0, queue->limit * queue->desc_size); /* * Initialize all queue entries to contain valid addresses. */ for (i = 0; i < queue->limit; i++) { entry_priv = queue->entries[i].priv_data; - entry_priv->desc = desc_offset(queue, addr, i); - entry_priv->desc_dma = desc_offset(queue, dma, i); - entry_priv->data = data_offset(queue, addr, i); - entry_priv->data_dma = data_offset(queue, dma, i); + entry_priv->desc = addr + i * queue->desc_size; + entry_priv->desc_dma = dma + i * queue->desc_size; } return 0; @@ -250,10 +190,11 @@ static void rt2x00pci_free_queue_dma(struct rt2x00_dev *rt2x00dev, struct queue_entry_priv_pci *entry_priv = queue->entries[0].priv_data; - if (entry_priv->data) - dma_free_coherent(rt2x00dev->dev, dma_size(queue), - entry_priv->data, entry_priv->data_dma); - entry_priv->data = NULL; + if (entry_priv->desc) + dma_free_coherent(rt2x00dev->dev, + queue->limit * queue->desc_size, + entry_priv->desc, entry_priv->desc_dma); + entry_priv->desc = NULL; } int rt2x00pci_initialize(struct rt2x00_dev *rt2x00dev) diff --git a/drivers/net/wireless/rt2x00/rt2x00pci.h b/drivers/net/wireless/rt2x00/rt2x00pci.h index 87c4a0cd78d..7e5708dca73 100644 --- a/drivers/net/wireless/rt2x00/rt2x00pci.h +++ b/drivers/net/wireless/rt2x00/rt2x00pci.h @@ -107,9 +107,6 @@ int rt2x00pci_write_tx_data(struct queue_entry *entry); struct queue_entry_priv_pci { __le32 *desc; dma_addr_t desc_dma; - - void *data; - dma_addr_t data_dma; }; /** diff --git a/drivers/net/wireless/rt2x00/rt2x00queue.c b/drivers/net/wireless/rt2x00/rt2x00queue.c index 278f1a1ac92..29d2b912853 100644 --- a/drivers/net/wireless/rt2x00/rt2x00queue.c +++ b/drivers/net/wireless/rt2x00/rt2x00queue.c @@ -25,21 +25,24 @@ #include #include +#include #include "rt2x00.h" #include "rt2x00lib.h" -struct sk_buff *rt2x00queue_alloc_skb(struct data_queue *queue) +struct sk_buff *rt2x00queue_alloc_rxskb(struct rt2x00_dev *rt2x00dev, + struct queue_entry *entry) { - struct sk_buff *skb; unsigned int frame_size; unsigned int reserved_size; + struct sk_buff *skb; + struct skb_frame_desc *skbdesc; /* * The frame size includes descriptor size, because the * hardware directly receive the frame into the skbuffer. */ - frame_size = queue->data_size + queue->desc_size; + frame_size = entry->queue->data_size + entry->queue->desc_size; /* * Reserve a few bytes extra headroom to allow drivers some moving @@ -57,12 +60,67 @@ struct sk_buff *rt2x00queue_alloc_skb(struct data_queue *queue) skb_reserve(skb, reserved_size); skb_put(skb, frame_size); + /* + * Populate skbdesc. + */ + skbdesc = get_skb_frame_desc(skb); + memset(skbdesc, 0, sizeof(*skbdesc)); + skbdesc->entry = entry; + + if (test_bit(DRIVER_REQUIRE_DMA, &rt2x00dev->flags)) { + skbdesc->skb_dma = dma_map_single(rt2x00dev->dev, + skb->data, + skb->len, + DMA_FROM_DEVICE); + skbdesc->flags |= SKBDESC_DMA_MAPPED_RX; + } + return skb; } -EXPORT_SYMBOL_GPL(rt2x00queue_alloc_skb); +EXPORT_SYMBOL_GPL(rt2x00queue_alloc_rxskb); -void rt2x00queue_free_skb(struct sk_buff *skb) +void rt2x00queue_map_txskb(struct rt2x00_dev *rt2x00dev, struct sk_buff *skb) { + struct skb_frame_desc *skbdesc = get_skb_frame_desc(skb); + + skbdesc->skb_dma = dma_map_single(rt2x00dev->dev, skb->data, skb->len, + DMA_TO_DEVICE); + skbdesc->flags |= SKBDESC_DMA_MAPPED_TX; +} +EXPORT_SYMBOL_GPL(rt2x00queue_map_txskb); + +void rt2x00queue_unmap_skb(struct rt2x00_dev *rt2x00dev, struct sk_buff *skb) +{ + struct skb_frame_desc *skbdesc = get_skb_frame_desc(skb); + + if (skbdesc->flags & SKBDESC_DMA_MAPPED_RX) { + dma_unmap_single(rt2x00dev->dev, skbdesc->skb_dma, skb->len, + DMA_FROM_DEVICE); + skbdesc->flags &= ~SKBDESC_DMA_MAPPED_RX; + } + + if (skbdesc->flags & SKBDESC_DMA_MAPPED_TX) { + dma_unmap_single(rt2x00dev->dev, skbdesc->skb_dma, skb->len, + DMA_TO_DEVICE); + skbdesc->flags &= ~SKBDESC_DMA_MAPPED_TX; + } +} +EXPORT_SYMBOL_GPL(rt2x00queue_unmap_skb); + +void rt2x00queue_free_skb(struct rt2x00_dev *rt2x00dev, struct sk_buff *skb) +{ + struct skb_frame_desc *skbdesc = get_skb_frame_desc(skb); + + if (skbdesc->flags & SKBDESC_DMA_MAPPED_RX) { + dma_unmap_single(rt2x00dev->dev, skbdesc->skb_dma, skb->len, + DMA_FROM_DEVICE); + } + + if (skbdesc->flags & SKBDESC_DMA_MAPPED_TX) { + dma_unmap_single(rt2x00dev->dev, skbdesc->skb_dma, skb->len, + DMA_TO_DEVICE); + } + dev_kfree_skb_any(skb); } EXPORT_SYMBOL_GPL(rt2x00queue_free_skb); @@ -421,7 +479,8 @@ static int rt2x00queue_alloc_entries(struct data_queue *queue, return 0; } -static void rt2x00queue_free_skbs(struct data_queue *queue) +static void rt2x00queue_free_skbs(struct rt2x00_dev *rt2x00dev, + struct data_queue *queue) { unsigned int i; @@ -430,27 +489,27 @@ static void rt2x00queue_free_skbs(struct data_queue *queue) for (i = 0; i < queue->limit; i++) { if (queue->entries[i].skb) - rt2x00queue_free_skb(queue->entries[i].skb); + rt2x00queue_free_skb(rt2x00dev, queue->entries[i].skb); } } -static int rt2x00queue_alloc_skbs(struct data_queue *queue) +static int rt2x00queue_alloc_rxskbs(struct rt2x00_dev *rt2x00dev, + struct data_queue *queue) { unsigned int i; struct sk_buff *skb; for (i = 0; i < queue->limit; i++) { - skb = rt2x00queue_alloc_skb(queue); + skb = rt2x00queue_alloc_rxskb(rt2x00dev, &queue->entries[i]); if (!skb) goto exit; - queue->entries[i].skb = skb; } return 0; exit: - rt2x00queue_free_skbs(queue); + rt2x00queue_free_skbs(rt2x00dev, queue); return -ENOMEM; } @@ -481,7 +540,7 @@ int rt2x00queue_initialize(struct rt2x00_dev *rt2x00dev) goto exit; } - status = rt2x00queue_alloc_skbs(rt2x00dev->rx); + status = rt2x00queue_alloc_rxskbs(rt2x00dev, rt2x00dev->rx); if (status) goto exit; @@ -499,7 +558,7 @@ void rt2x00queue_uninitialize(struct rt2x00_dev *rt2x00dev) { struct data_queue *queue; - rt2x00queue_free_skbs(rt2x00dev->rx); + rt2x00queue_free_skbs(rt2x00dev, rt2x00dev->rx); queue_for_each(rt2x00dev, queue) { kfree(queue->entries); diff --git a/drivers/net/wireless/rt2x00/rt2x00queue.h b/drivers/net/wireless/rt2x00/rt2x00queue.h index fcf52520b01..192b6e789a7 100644 --- a/drivers/net/wireless/rt2x00/rt2x00queue.h +++ b/drivers/net/wireless/rt2x00/rt2x00queue.h @@ -83,9 +83,10 @@ enum data_queue_qid { * enum skb_frame_desc_flags: Flags for &struct skb_frame_desc * */ -//enum skb_frame_desc_flags { -// TEMPORARILY EMPTY -//}; +enum skb_frame_desc_flags { + SKBDESC_DMA_MAPPED_RX = (1 << 0), + SKBDESC_DMA_MAPPED_TX = (1 << 1), +}; /** * struct skb_frame_desc: Descriptor information for the skb buffer @@ -94,19 +95,20 @@ enum data_queue_qid { * this structure should not exceed the size of that array (40 bytes). * * @flags: Frame flags, see &enum skb_frame_desc_flags. - * @data: Pointer to data part of frame (Start of ieee80211 header). + * @desc_len: Length of the frame descriptor. * @desc: Pointer to descriptor part of the frame. * Note that this pointer could point to something outside * of the scope of the skb->data pointer. - * @data_len: Length of the frame data. - * @desc_len: Length of the frame descriptor. + * @skb_dma: (PCI-only) the DMA address associated with the sk buffer. * @entry: The entry to which this sk buffer belongs. */ struct skb_frame_desc { unsigned int flags; - void *desc; unsigned int desc_len; + void *desc; + + dma_addr_t skb_dma; struct queue_entry *entry; }; diff --git a/drivers/net/wireless/rt2x00/rt2x00usb.c b/drivers/net/wireless/rt2x00/rt2x00usb.c index 29dba86c8cf..552f0e94f80 100644 --- a/drivers/net/wireless/rt2x00/rt2x00usb.c +++ b/drivers/net/wireless/rt2x00/rt2x00usb.c @@ -266,9 +266,7 @@ static void rt2x00usb_interrupt_rxdone(struct urb *urb) { struct queue_entry *entry = (struct queue_entry *)urb->context; struct rt2x00_dev *rt2x00dev = entry->queue->rt2x00dev; - struct sk_buff *skb; - struct skb_frame_desc *skbdesc; - struct rxdone_entry_desc rxdesc; + struct skb_frame_desc *skbdesc = get_skb_frame_desc(entry->skb); u8 rxd[32]; if (!test_bit(DEVICE_ENABLED_RADIO, &rt2x00dev->flags) || @@ -284,36 +282,19 @@ static void rt2x00usb_interrupt_rxdone(struct urb *urb) goto skip_entry; /* - * Fill in skb descriptor + * Fill in desc fields of the skb descriptor */ - skbdesc = get_skb_frame_desc(entry->skb); - memset(skbdesc, 0, sizeof(*skbdesc)); - skbdesc->entry = entry; skbdesc->desc = rxd; skbdesc->desc_len = entry->queue->desc_size; - memset(&rxdesc, 0, sizeof(rxdesc)); - rt2x00dev->ops->lib->fill_rxdone(entry, &rxdesc); - - /* - * Allocate a new sk buffer to replace the current one. - * If allocation fails, we should drop the current frame - * so we can recycle the existing sk buffer for the new frame. - */ - skb = rt2x00queue_alloc_skb(entry->queue); - if (!skb) - goto skip_entry; - /* * Send the frame to rt2x00lib for further processing. */ - rt2x00lib_rxdone(entry, &rxdesc); + rt2x00lib_rxdone(rt2x00dev, entry); /* - * Replace current entry's skb with the newly allocated one, - * and reinitialize the urb. + * Reinitialize the urb. */ - entry->skb = skb; urb->transfer_buffer = entry->skb->data; urb->transfer_buffer_length = entry->skb->len; diff --git a/drivers/net/wireless/rt2x00/rt61pci.c b/drivers/net/wireless/rt2x00/rt61pci.c index 2a7f3062035..c9f6d484413 100644 --- a/drivers/net/wireless/rt2x00/rt61pci.c +++ b/drivers/net/wireless/rt2x00/rt61pci.c @@ -1030,11 +1030,12 @@ static void rt61pci_init_rxentry(struct rt2x00_dev *rt2x00dev, struct queue_entry *entry) { struct queue_entry_priv_pci *entry_priv = entry->priv_data; + struct skb_frame_desc *skbdesc = get_skb_frame_desc(entry->skb); u32 word; rt2x00_desc_read(entry_priv->desc, 5, &word); rt2x00_set_field32(&word, RXD_W5_BUFFER_PHYSICAL_ADDRESS, - entry_priv->data_dma); + skbdesc->skb_dma); rt2x00_desc_write(entry_priv->desc, 5, word); rt2x00_desc_read(entry_priv->desc, 0, &word); @@ -1522,7 +1523,6 @@ static void rt61pci_write_tx_desc(struct rt2x00_dev *rt2x00dev, struct txentry_desc *txdesc) { struct skb_frame_desc *skbdesc = get_skb_frame_desc(skb); - struct queue_entry_priv_pci *entry_priv = skbdesc->entry->priv_data; __le32 *txd = skbdesc->desc; u32 word; @@ -1557,7 +1557,7 @@ static void rt61pci_write_tx_desc(struct rt2x00_dev *rt2x00dev, rt2x00_desc_read(txd, 6, &word); rt2x00_set_field32(&word, TXD_W6_BUFFER_PHYSICAL_ADDRESS, - entry_priv->data_dma); + skbdesc->skb_dma); rt2x00_desc_write(txd, 6, word); if (skbdesc->desc_len > TXINFO_SIZE) { @@ -2302,9 +2302,10 @@ static int rt61pci_probe_hw(struct rt2x00_dev *rt2x00dev) rt61pci_probe_hw_mode(rt2x00dev); /* - * This device requires firmware. + * This device requires firmware and DMA mapped skbs. */ __set_bit(DRIVER_REQUIRE_FIRMWARE, &rt2x00dev->flags); + __set_bit(DRIVER_REQUIRE_DMA, &rt2x00dev->flags); /* * Set the rssi offset. -- cgit v1.2.3 From d74f5ba473b915e5d4ea1ed391984bb62d9de8b1 Mon Sep 17 00:00:00 2001 From: Ivo van Doorn Date: Mon, 16 Jun 2008 19:56:54 +0200 Subject: rt2x00: Cleanup symbol exports With a bit of code moving to rt2x00lib within the TX and RX paths we can now remove a lot of EXPORT_SYMBOL_GPL() statements. This cleans up the interface between rt2x00lib and the drivers and has the additional benefit that rt2x00pci and rt2x00usb are trimmed down in size as well since they have less to do. Signed-off-by: Ivo van Doorn Signed-off-by: John W. Linville --- drivers/net/wireless/rt2x00/rt2400pci.c | 2 +- drivers/net/wireless/rt2x00/rt2500pci.c | 2 +- drivers/net/wireless/rt2x00/rt2x00.h | 34 --------------------- drivers/net/wireless/rt2x00/rt2x00dev.c | 29 ++++++++++++++++++ drivers/net/wireless/rt2x00/rt2x00lib.h | 51 +++++++++++++++++++++++++++++-- drivers/net/wireless/rt2x00/rt2x00pci.c | 49 ----------------------------- drivers/net/wireless/rt2x00/rt2x00pci.h | 9 ------ drivers/net/wireless/rt2x00/rt2x00queue.c | 15 ++++++--- drivers/net/wireless/rt2x00/rt2x00queue.h | 2 ++ drivers/net/wireless/rt2x00/rt2x00usb.c | 42 +++++-------------------- drivers/net/wireless/rt2x00/rt61pci.c | 4 +-- 11 files changed, 102 insertions(+), 137 deletions(-) (limited to 'drivers/net/wireless') diff --git a/drivers/net/wireless/rt2x00/rt2400pci.c b/drivers/net/wireless/rt2x00/rt2400pci.c index de2dd336f23..b3dffcfed83 100644 --- a/drivers/net/wireless/rt2x00/rt2400pci.c +++ b/drivers/net/wireless/rt2x00/rt2400pci.c @@ -1154,7 +1154,7 @@ static void rt2400pci_txdone(struct rt2x00_dev *rt2x00dev, } txdesc.retry = rt2x00_get_field32(word, TXD_W0_RETRY_COUNT); - rt2x00pci_txdone(rt2x00dev, entry, &txdesc); + rt2x00lib_txdone(entry, &txdesc); } } diff --git a/drivers/net/wireless/rt2x00/rt2500pci.c b/drivers/net/wireless/rt2x00/rt2500pci.c index 5077b62dcc5..0423c251c78 100644 --- a/drivers/net/wireless/rt2x00/rt2500pci.c +++ b/drivers/net/wireless/rt2x00/rt2500pci.c @@ -1312,7 +1312,7 @@ static void rt2500pci_txdone(struct rt2x00_dev *rt2x00dev, } txdesc.retry = rt2x00_get_field32(word, TXD_W0_RETRY_COUNT); - rt2x00pci_txdone(rt2x00dev, entry, &txdesc); + rt2x00lib_txdone(entry, &txdesc); } } diff --git a/drivers/net/wireless/rt2x00/rt2x00.h b/drivers/net/wireless/rt2x00/rt2x00.h index 28c9026bb56..94b7c9bd09e 100644 --- a/drivers/net/wireless/rt2x00/rt2x00.h +++ b/drivers/net/wireless/rt2x00/rt2x00.h @@ -899,14 +899,6 @@ static inline u16 get_duration_res(const unsigned int size, const u8 rate) return ((size * 8 * 10) % rate); } -/** - * rt2x00queue_alloc_rxskb - allocate a skb for RX purposes. - * @rt2x00dev: Pointer to &struct rt2x00_dev. - * @queue: The queue for which the skb will be applicable. - */ -struct sk_buff *rt2x00queue_alloc_rxskb(struct rt2x00_dev *rt2x00dev, - struct queue_entry *entry); - /** * rt2x00queue_map_txskb - Map a skb into DMA for TX purposes. * @rt2x00dev: Pointer to &struct rt2x00_dev. @@ -914,20 +906,6 @@ struct sk_buff *rt2x00queue_alloc_rxskb(struct rt2x00_dev *rt2x00dev, */ void rt2x00queue_map_txskb(struct rt2x00_dev *rt2x00dev, struct sk_buff *skb); -/** - * rt2x00queue_unmap_skb - Unmap a skb from DMA. - * @rt2x00dev: Pointer to &struct rt2x00_dev. - * @skb: The skb to unmap. - */ -void rt2x00queue_unmap_skb(struct rt2x00_dev *rt2x00dev, struct sk_buff *skb); - -/** - * rt2x00queue_free_skb - free a skb - * @rt2x00dev: Pointer to &struct rt2x00_dev. - * @skb: The skb to free. - */ -void rt2x00queue_free_skb(struct rt2x00_dev *rt2x00dev, struct sk_buff *skb); - /** * rt2x00queue_create_tx_descriptor - Create TX descriptor from mac80211 input * @entry: The entry which will be used to transfer the TX frame. @@ -977,18 +955,6 @@ struct data_queue *rt2x00queue_get_queue(struct rt2x00_dev *rt2x00dev, struct queue_entry *rt2x00queue_get_entry(struct data_queue *queue, enum queue_index index); -/** - * rt2x00queue_index_inc - Index incrementation function - * @queue: Queue (&struct data_queue) to perform the action on. - * @index: Index type (&enum queue_index) to perform the action on. - * - * This function will increase the requested index on the queue, - * it will grab the appropriate locks and handle queue overflow events by - * resetting the index to the start of the queue. - */ -void rt2x00queue_index_inc(struct data_queue *queue, enum queue_index index); - - /* * Interrupt context handlers. */ diff --git a/drivers/net/wireless/rt2x00/rt2x00dev.c b/drivers/net/wireless/rt2x00/rt2x00dev.c index 99b14ba99d9..2a63a7b911b 100644 --- a/drivers/net/wireless/rt2x00/rt2x00dev.c +++ b/drivers/net/wireless/rt2x00/rt2x00dev.c @@ -504,6 +504,12 @@ void rt2x00lib_txdone(struct queue_entry *entry, { struct rt2x00_dev *rt2x00dev = entry->queue->rt2x00dev; struct ieee80211_tx_info *tx_info = IEEE80211_SKB_CB(entry->skb); + enum data_queue_qid qid = skb_get_queue_mapping(entry->skb); + + /* + * Unmap the skb. + */ + rt2x00queue_unmap_skb(rt2x00dev, entry->skb); /* * Send frame to debugfs immediately, after this call is completed @@ -552,7 +558,25 @@ void rt2x00lib_txdone(struct queue_entry *entry, ieee80211_tx_status_irqsafe(rt2x00dev->hw, entry->skb); else dev_kfree_skb_irq(entry->skb); + + /* + * Make this entry available for reuse. + */ entry->skb = NULL; + entry->flags = 0; + + rt2x00dev->ops->lib->init_txentry(rt2x00dev, entry); + + __clear_bit(ENTRY_OWNER_DEVICE_DATA, &entry->flags); + rt2x00queue_index_inc(entry->queue, Q_INDEX_DONE); + + /* + * If the data queue was below the threshold before the txdone + * handler we must make sure the packet queue in the mac80211 stack + * is reenabled when the txdone handler has finished. + */ + if (!rt2x00queue_threshold(entry->queue)) + ieee80211_wake_queue(rt2x00dev->hw, qid); } EXPORT_SYMBOL_GPL(rt2x00lib_txdone); @@ -657,6 +681,11 @@ void rt2x00lib_rxdone(struct rt2x00_dev *rt2x00dev, * Replace the skb with the freshly allocated one. */ entry->skb = skb; + entry->flags = 0; + + rt2x00dev->ops->lib->init_rxentry(rt2x00dev, entry); + + rt2x00queue_index_inc(entry->queue, Q_INDEX); } EXPORT_SYMBOL_GPL(rt2x00lib_rxdone); diff --git a/drivers/net/wireless/rt2x00/rt2x00lib.h b/drivers/net/wireless/rt2x00/rt2x00lib.h index 558f45bf27e..1d1f0749375 100644 --- a/drivers/net/wireless/rt2x00/rt2x00lib.h +++ b/drivers/net/wireless/rt2x00/rt2x00lib.h @@ -98,10 +98,57 @@ void rt2x00lib_config_antenna(struct rt2x00_dev *rt2x00dev, void rt2x00lib_config(struct rt2x00_dev *rt2x00dev, struct ieee80211_conf *conf, const int force_config); -/* - * Queue handlers. +/** + * DOC: Queue handlers + */ + +/** + * rt2x00queue_alloc_rxskb - allocate a skb for RX purposes. + * @rt2x00dev: Pointer to &struct rt2x00_dev. + * @queue: The queue for which the skb will be applicable. + */ +struct sk_buff *rt2x00queue_alloc_rxskb(struct rt2x00_dev *rt2x00dev, + struct queue_entry *entry); + +/** + * rt2x00queue_unmap_skb - Unmap a skb from DMA. + * @rt2x00dev: Pointer to &struct rt2x00_dev. + * @skb: The skb to unmap. + */ +void rt2x00queue_unmap_skb(struct rt2x00_dev *rt2x00dev, struct sk_buff *skb); + +/** + * rt2x00queue_free_skb - free a skb + * @rt2x00dev: Pointer to &struct rt2x00_dev. + * @skb: The skb to free. + */ +void rt2x00queue_free_skb(struct rt2x00_dev *rt2x00dev, struct sk_buff *skb); + +/** + * rt2x00queue_free_skb - free a skb + * @rt2x00dev: Pointer to &struct rt2x00_dev. + * @skb: The skb to free. + */ +void rt2x00queue_free_skb(struct rt2x00_dev *rt2x00dev, struct sk_buff *skb); + +/** + * rt2x00queue_write_tx_frame - Write TX frame to hardware + * @queue: Queue over which the frame should be send + * @skb: The skb to send */ int rt2x00queue_write_tx_frame(struct data_queue *queue, struct sk_buff *skb); + +/** + * rt2x00queue_index_inc - Index incrementation function + * @queue: Queue (&struct data_queue) to perform the action on. + * @index: Index type (&enum queue_index) to perform the action on. + * + * This function will increase the requested index on the queue, + * it will grab the appropriate locks and handle queue overflow events by + * resetting the index to the start of the queue. + */ +void rt2x00queue_index_inc(struct data_queue *queue, enum queue_index index); + void rt2x00queue_init_rx(struct rt2x00_dev *rt2x00dev); void rt2x00queue_init_tx(struct rt2x00_dev *rt2x00dev); int rt2x00queue_initialize(struct rt2x00_dev *rt2x00dev); diff --git a/drivers/net/wireless/rt2x00/rt2x00pci.c b/drivers/net/wireless/rt2x00/rt2x00pci.c index f9d0d76f870..adf2876ed8a 100644 --- a/drivers/net/wireless/rt2x00/rt2x00pci.c +++ b/drivers/net/wireless/rt2x00/rt2x00pci.c @@ -60,12 +60,8 @@ int rt2x00pci_write_tx_data(struct queue_entry *entry) * Fill in skb descriptor */ skbdesc = get_skb_frame_desc(entry->skb); - memset(skbdesc, 0, sizeof(*skbdesc)); skbdesc->desc = entry_priv->desc; skbdesc->desc_len = entry->queue->desc_size; - skbdesc->entry = entry; - - rt2x00queue_map_txskb(entry->queue->rt2x00dev, entry->skb); return 0; } @@ -101,55 +97,10 @@ void rt2x00pci_rxdone(struct rt2x00_dev *rt2x00dev) * Send the frame to rt2x00lib for further processing. */ rt2x00lib_rxdone(rt2x00dev, entry); - - /* - * Reset the RXD for this entry. - */ - rt2x00dev->ops->lib->init_rxentry(rt2x00dev, entry); - - rt2x00queue_index_inc(queue, Q_INDEX); } } EXPORT_SYMBOL_GPL(rt2x00pci_rxdone); -void rt2x00pci_txdone(struct rt2x00_dev *rt2x00dev, struct queue_entry *entry, - struct txdone_entry_desc *txdesc) -{ - struct queue_entry_priv_pci *entry_priv = entry->priv_data; - enum data_queue_qid qid = skb_get_queue_mapping(entry->skb); - u32 word; - - /* - * Unmap the skb. - */ - rt2x00queue_unmap_skb(rt2x00dev, entry->skb); - - rt2x00lib_txdone(entry, txdesc); - - /* - * Make this entry available for reuse. - */ - entry->flags = 0; - - rt2x00_desc_read(entry_priv->desc, 0, &word); - rt2x00_set_field32(&word, TXD_ENTRY_OWNER_NIC, 0); - rt2x00_set_field32(&word, TXD_ENTRY_VALID, 0); - rt2x00_desc_write(entry_priv->desc, 0, word); - - __clear_bit(ENTRY_OWNER_DEVICE_DATA, &entry->flags); - rt2x00queue_index_inc(entry->queue, Q_INDEX_DONE); - - /* - * If the data queue was below the threshold before the txdone - * handler we must make sure the packet queue in the mac80211 stack - * is reenabled when the txdone handler has finished. - */ - if (!rt2x00queue_threshold(entry->queue)) - ieee80211_wake_queue(rt2x00dev->hw, qid); - -} -EXPORT_SYMBOL_GPL(rt2x00pci_txdone); - /* * Device initialization handlers. */ diff --git a/drivers/net/wireless/rt2x00/rt2x00pci.h b/drivers/net/wireless/rt2x00/rt2x00pci.h index 7e5708dca73..50c6df4f81d 100644 --- a/drivers/net/wireless/rt2x00/rt2x00pci.h +++ b/drivers/net/wireless/rt2x00/rt2x00pci.h @@ -115,15 +115,6 @@ struct queue_entry_priv_pci { */ void rt2x00pci_rxdone(struct rt2x00_dev *rt2x00dev); -/** - * rt2x00pci_txdone - Handle TX done events - * @rt2x00dev: Device pointer, see &struct rt2x00_dev. - * @entry: Entry which has completed the transmission of a frame. - * @desc: TX done descriptor - */ -void rt2x00pci_txdone(struct rt2x00_dev *rt2x00dev, struct queue_entry *entry, - struct txdone_entry_desc *desc); - /* * Device initialization handlers. */ diff --git a/drivers/net/wireless/rt2x00/rt2x00queue.c b/drivers/net/wireless/rt2x00/rt2x00queue.c index 29d2b912853..49d3bb84ab6 100644 --- a/drivers/net/wireless/rt2x00/rt2x00queue.c +++ b/drivers/net/wireless/rt2x00/rt2x00queue.c @@ -77,7 +77,6 @@ struct sk_buff *rt2x00queue_alloc_rxskb(struct rt2x00_dev *rt2x00dev, return skb; } -EXPORT_SYMBOL_GPL(rt2x00queue_alloc_rxskb); void rt2x00queue_map_txskb(struct rt2x00_dev *rt2x00dev, struct sk_buff *skb) { @@ -105,7 +104,6 @@ void rt2x00queue_unmap_skb(struct rt2x00_dev *rt2x00dev, struct sk_buff *skb) skbdesc->flags &= ~SKBDESC_DMA_MAPPED_TX; } } -EXPORT_SYMBOL_GPL(rt2x00queue_unmap_skb); void rt2x00queue_free_skb(struct rt2x00_dev *rt2x00dev, struct sk_buff *skb) { @@ -123,7 +121,6 @@ void rt2x00queue_free_skb(struct rt2x00_dev *rt2x00dev, struct sk_buff *skb) dev_kfree_skb_any(skb); } -EXPORT_SYMBOL_GPL(rt2x00queue_free_skb); void rt2x00queue_create_tx_descriptor(struct queue_entry *entry, struct txentry_desc *txdesc) @@ -289,6 +286,7 @@ int rt2x00queue_write_tx_frame(struct data_queue *queue, struct sk_buff *skb) { struct queue_entry *entry = rt2x00queue_get_entry(queue, Q_INDEX); struct txentry_desc txdesc; + struct skb_frame_desc *skbdesc; if (unlikely(rt2x00queue_full(queue))) return -EINVAL; @@ -309,11 +307,21 @@ int rt2x00queue_write_tx_frame(struct data_queue *queue, struct sk_buff *skb) entry->skb = skb; rt2x00queue_create_tx_descriptor(entry, &txdesc); + /* + * skb->cb array is now ours and we are free to use it. + */ + skbdesc = get_skb_frame_desc(entry->skb); + memset(skbdesc, 0, sizeof(*skbdesc)); + skbdesc->entry = entry; + if (unlikely(queue->rt2x00dev->ops->lib->write_tx_data(entry))) { __clear_bit(ENTRY_OWNER_DEVICE_DATA, &entry->flags); return -EIO; } + if (test_bit(DRIVER_REQUIRE_DMA, &queue->rt2x00dev->flags)) + rt2x00queue_map_txskb(queue->rt2x00dev, skb); + __set_bit(ENTRY_DATA_PENDING, &entry->flags); rt2x00queue_index_inc(queue, Q_INDEX); @@ -389,7 +397,6 @@ void rt2x00queue_index_inc(struct data_queue *queue, enum queue_index index) spin_unlock_irqrestore(&queue->lock, irqflags); } -EXPORT_SYMBOL_GPL(rt2x00queue_index_inc); static void rt2x00queue_reset(struct data_queue *queue) { diff --git a/drivers/net/wireless/rt2x00/rt2x00queue.h b/drivers/net/wireless/rt2x00/rt2x00queue.h index 192b6e789a7..14ce8d4e139 100644 --- a/drivers/net/wireless/rt2x00/rt2x00queue.h +++ b/drivers/net/wireless/rt2x00/rt2x00queue.h @@ -82,6 +82,8 @@ enum data_queue_qid { /** * enum skb_frame_desc_flags: Flags for &struct skb_frame_desc * + * @SKBDESC_DMA_MAPPED_RX: &skb_dma field has been mapped for RX + * @SKBDESC_DMA_MAPPED_TX: &skb_dma field has been mapped for TX */ enum skb_frame_desc_flags { SKBDESC_DMA_MAPPED_RX = (1 << 0), diff --git a/drivers/net/wireless/rt2x00/rt2x00usb.c b/drivers/net/wireless/rt2x00/rt2x00usb.c index 552f0e94f80..b94c461fbaf 100644 --- a/drivers/net/wireless/rt2x00/rt2x00usb.c +++ b/drivers/net/wireless/rt2x00/rt2x00usb.c @@ -131,10 +131,9 @@ static void rt2x00usb_interrupt_txdone(struct urb *urb) struct queue_entry *entry = (struct queue_entry *)urb->context; struct rt2x00_dev *rt2x00dev = entry->queue->rt2x00dev; struct txdone_entry_desc txdesc; - enum data_queue_qid qid = skb_get_queue_mapping(entry->skb); if (!test_bit(DEVICE_ENABLED_RADIO, &rt2x00dev->flags) || - !__test_and_clear_bit(ENTRY_OWNER_DEVICE_DATA, &entry->flags)) + !test_bit(ENTRY_OWNER_DEVICE_DATA, &entry->flags)) return; /* @@ -158,20 +157,6 @@ static void rt2x00usb_interrupt_txdone(struct urb *urb) txdesc.retry = 0; rt2x00lib_txdone(entry, &txdesc); - - /* - * Make this entry available for reuse. - */ - entry->flags = 0; - rt2x00queue_index_inc(entry->queue, Q_INDEX_DONE); - - /* - * If the data queue was below the threshold before the txdone - * handler we must make sure the packet queue in the mac80211 stack - * is reenabled when the txdone handler has finished. - */ - if (!rt2x00queue_threshold(entry->queue)) - ieee80211_wake_queue(rt2x00dev->hw, qid); } int rt2x00usb_write_tx_data(struct queue_entry *entry) @@ -193,10 +178,8 @@ int rt2x00usb_write_tx_data(struct queue_entry *entry) * Fill in skb descriptor */ skbdesc = get_skb_frame_desc(entry->skb); - memset(skbdesc, 0, sizeof(*skbdesc)); skbdesc->desc = entry->skb->data; skbdesc->desc_len = entry->queue->desc_size; - skbdesc->entry = entry; /* * USB devices cannot blindly pass the skb->len as the @@ -270,7 +253,7 @@ static void rt2x00usb_interrupt_rxdone(struct urb *urb) u8 rxd[32]; if (!test_bit(DEVICE_ENABLED_RADIO, &rt2x00dev->flags) || - !test_and_clear_bit(ENTRY_OWNER_DEVICE_DATA, &entry->flags)) + !test_bit(ENTRY_OWNER_DEVICE_DATA, &entry->flags)) return; /* @@ -278,8 +261,11 @@ static void rt2x00usb_interrupt_rxdone(struct urb *urb) * to be actually valid, or if the urb is signaling * a problem. */ - if (urb->actual_length < entry->queue->desc_size || urb->status) - goto skip_entry; + if (urb->actual_length < entry->queue->desc_size || urb->status) { + __set_bit(ENTRY_OWNER_DEVICE_DATA, &entry->flags); + usb_submit_urb(urb, GFP_ATOMIC); + return; + } /* * Fill in desc fields of the skb descriptor @@ -291,20 +277,6 @@ static void rt2x00usb_interrupt_rxdone(struct urb *urb) * Send the frame to rt2x00lib for further processing. */ rt2x00lib_rxdone(rt2x00dev, entry); - - /* - * Reinitialize the urb. - */ - urb->transfer_buffer = entry->skb->data; - urb->transfer_buffer_length = entry->skb->len; - -skip_entry: - if (test_bit(DEVICE_ENABLED_RADIO, &entry->queue->rt2x00dev->flags)) { - __set_bit(ENTRY_OWNER_DEVICE_DATA, &entry->flags); - usb_submit_urb(urb, GFP_ATOMIC); - } - - rt2x00queue_index_inc(entry->queue, Q_INDEX); } /* diff --git a/drivers/net/wireless/rt2x00/rt61pci.c b/drivers/net/wireless/rt2x00/rt61pci.c index c9f6d484413..bbf1048f640 100644 --- a/drivers/net/wireless/rt2x00/rt61pci.c +++ b/drivers/net/wireless/rt2x00/rt61pci.c @@ -1767,7 +1767,7 @@ static void rt61pci_txdone(struct rt2x00_dev *rt2x00dev) __set_bit(TXDONE_UNKNOWN, &txdesc.flags); txdesc.retry = 0; - rt2x00pci_txdone(rt2x00dev, entry_done, &txdesc); + rt2x00lib_txdone(entry_done, &txdesc); entry_done = rt2x00queue_get_entry(queue, Q_INDEX_DONE); } @@ -1787,7 +1787,7 @@ static void rt61pci_txdone(struct rt2x00_dev *rt2x00dev) } txdesc.retry = rt2x00_get_field32(reg, STA_CSR4_RETRY_COUNT); - rt2x00pci_txdone(rt2x00dev, entry, &txdesc); + rt2x00lib_txdone(entry, &txdesc); } } -- cgit v1.2.3 From c1d35dfa0f7d75ba14c442143a9ad8e232d3edfb Mon Sep 17 00:00:00 2001 From: Ivo van Doorn Date: Mon, 16 Jun 2008 19:57:11 +0200 Subject: rt2x00: Fix sparse warning on nested container_of() Sparse produces warnings about nested contain_of() statements, this means that lines like: interface_to_usbdev(to_usb_interface(rt2x00dev->dev)); will upset sparse. Add a new macro to rt2x00usb.h which will convert to device structure to the usb_device pointer in 2 steps to prevent this sparse warning. Signed-off-by: Ivo van Doorn Signed-off-by: John W. Linville --- drivers/net/wireless/rt2x00/rt2500usb.c | 3 +-- drivers/net/wireless/rt2x00/rt2x00usb.c | 9 +++------ drivers/net/wireless/rt2x00/rt2x00usb.h | 6 ++++++ 3 files changed, 10 insertions(+), 8 deletions(-) (limited to 'drivers/net/wireless') diff --git a/drivers/net/wireless/rt2x00/rt2500usb.c b/drivers/net/wireless/rt2x00/rt2500usb.c index 6b6e7b93d2a..d0958008c01 100644 --- a/drivers/net/wireless/rt2x00/rt2500usb.c +++ b/drivers/net/wireless/rt2x00/rt2500usb.c @@ -1672,8 +1672,7 @@ static int rt2500usb_probe_hw(struct rt2x00_dev *rt2x00dev) static int rt2500usb_beacon_update(struct ieee80211_hw *hw, struct sk_buff *skb) { struct rt2x00_dev *rt2x00dev = hw->priv; - struct usb_device *usb_dev = - interface_to_usbdev(to_usb_interface(rt2x00dev->dev)); + struct usb_device *usb_dev = to_usb_device_intf(rt2x00dev->dev); struct ieee80211_tx_info *tx_info = IEEE80211_SKB_CB(skb); struct rt2x00_intf *intf = vif_to_intf(tx_info->control.vif); struct queue_entry_priv_usb_bcn *bcn_priv; diff --git a/drivers/net/wireless/rt2x00/rt2x00usb.c b/drivers/net/wireless/rt2x00/rt2x00usb.c index b94c461fbaf..5593b9a8310 100644 --- a/drivers/net/wireless/rt2x00/rt2x00usb.c +++ b/drivers/net/wireless/rt2x00/rt2x00usb.c @@ -40,8 +40,7 @@ int rt2x00usb_vendor_request(struct rt2x00_dev *rt2x00dev, void *buffer, const u16 buffer_length, const int timeout) { - struct usb_device *usb_dev = - interface_to_usbdev(to_usb_interface(rt2x00dev->dev)); + struct usb_device *usb_dev = to_usb_device_intf(rt2x00dev->dev); int status; unsigned int i; unsigned int pipe = @@ -162,8 +161,7 @@ static void rt2x00usb_interrupt_txdone(struct urb *urb) int rt2x00usb_write_tx_data(struct queue_entry *entry) { struct rt2x00_dev *rt2x00dev = entry->queue->rt2x00dev; - struct usb_device *usb_dev = - interface_to_usbdev(to_usb_interface(rt2x00dev->dev)); + struct usb_device *usb_dev = to_usb_device_intf(rt2x00dev->dev); struct queue_entry_priv_usb *entry_priv = entry->priv_data; struct skb_frame_desc *skbdesc; u32 length; @@ -319,8 +317,7 @@ EXPORT_SYMBOL_GPL(rt2x00usb_disable_radio); void rt2x00usb_init_rxentry(struct rt2x00_dev *rt2x00dev, struct queue_entry *entry) { - struct usb_device *usb_dev = - interface_to_usbdev(to_usb_interface(rt2x00dev->dev)); + struct usb_device *usb_dev = to_usb_device_intf(rt2x00dev->dev); struct queue_entry_priv_usb *entry_priv = entry->priv_data; usb_fill_bulk_urb(entry_priv->urb, usb_dev, diff --git a/drivers/net/wireless/rt2x00/rt2x00usb.h b/drivers/net/wireless/rt2x00/rt2x00usb.h index b1187c812e7..aad794adf52 100644 --- a/drivers/net/wireless/rt2x00/rt2x00usb.h +++ b/drivers/net/wireless/rt2x00/rt2x00usb.h @@ -26,6 +26,12 @@ #ifndef RT2X00USB_H #define RT2X00USB_H +#define to_usb_device_intf(d) \ +({ \ + struct usb_interface *intf = to_usb_interface(d); \ + interface_to_usbdev(intf); \ +}) + /* * This variable should be used with the * usb_driver structure initialization. -- cgit v1.2.3 From f529932ce27e809e8c9bab5d744df5aef8a89157 Mon Sep 17 00:00:00 2001 From: Ivo van Doorn Date: Mon, 16 Jun 2008 19:57:40 +0200 Subject: rt2x00: Increase queue size Without the preallocated DMA we can now safely increase the queue size withotu negative impact on the memory requirements of rt2x00. Signed-off-by: Ivo van Doorn Signed-off-by: John W. Linville --- drivers/net/wireless/rt2x00/rt2x00queue.h | 17 ++++++++++------- 1 file changed, 10 insertions(+), 7 deletions(-) (limited to 'drivers/net/wireless') diff --git a/drivers/net/wireless/rt2x00/rt2x00queue.h b/drivers/net/wireless/rt2x00/rt2x00queue.h index 14ce8d4e139..5dd9cca3c62 100644 --- a/drivers/net/wireless/rt2x00/rt2x00queue.h +++ b/drivers/net/wireless/rt2x00/rt2x00queue.h @@ -42,15 +42,18 @@ /** * DOC: Number of entries per queue * - * After research it was concluded that 12 entries in a RX and TX - * queue would be sufficient. Although this is almost one third of - * the amount the legacy driver allocated, the queues aren't getting - * filled to the maximum even when working with the maximum rate. + * Under normal load without fragmentation 12 entries are sufficient + * without the queue being filled up to the maximum. When using fragmentation + * and the queue threshold code we need to add some additional margins to + * make sure the queue will never (or only under extreme load) fill up + * completely. + * Since we don't use preallocated DMA having a large number of queue entries + * will have only minimal impact on the memory requirements for the queue. */ -#define RX_ENTRIES 12 -#define TX_ENTRIES 12 +#define RX_ENTRIES 24 +#define TX_ENTRIES 24 #define BEACON_ENTRIES 1 -#define ATIM_ENTRIES 1 +#define ATIM_ENTRIES 8 /** * enum data_queue_qid: Queue identification -- cgit v1.2.3 From 8160465dc7197dc1abc426852bb3fa00108923f4 Mon Sep 17 00:00:00 2001 From: Ivo van Doorn Date: Mon, 16 Jun 2008 19:58:00 +0200 Subject: rt2x00: Release rt2x00 2.1.8 Signed-off-by: Ivo van Doorn Signed-off-by: John W. Linville --- drivers/net/wireless/rt2x00/rt2x00.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers/net/wireless') diff --git a/drivers/net/wireless/rt2x00/rt2x00.h b/drivers/net/wireless/rt2x00/rt2x00.h index 94b7c9bd09e..d2ddab179c9 100644 --- a/drivers/net/wireless/rt2x00/rt2x00.h +++ b/drivers/net/wireless/rt2x00/rt2x00.h @@ -44,7 +44,7 @@ /* * Module information. */ -#define DRV_VERSION "2.1.7" +#define DRV_VERSION "2.1.8" #define DRV_PROJECT "http://rt2x00.serialmonkey.com" /* -- cgit v1.2.3 From 8bd463f4f913db12a1b7374f84304631289a1e0b Mon Sep 17 00:00:00 2001 From: Michael Buesch Date: Thu, 19 Jun 2008 00:35:49 +0200 Subject: b43: Add debugfs files for MMIO register access This adds debugfs files for reading and writing arbitrary wireless core registers. This is useful for debugging. Signed-off-by: Michael Buesch Signed-off-by: John W. Linville --- drivers/net/wireless/b43/debugfs.c | 124 +++++++++++++++++++++++++++++++++++++ drivers/net/wireless/b43/debugfs.h | 9 +++ 2 files changed, 133 insertions(+) (limited to 'drivers/net/wireless') diff --git a/drivers/net/wireless/b43/debugfs.c b/drivers/net/wireless/b43/debugfs.c index 210e2789c1c..9cdd9eca082 100644 --- a/drivers/net/wireless/b43/debugfs.c +++ b/drivers/net/wireless/b43/debugfs.c @@ -74,6 +74,115 @@ struct b43_dfs_file * fops_to_dfs_file(struct b43_wldev *dev, } while (0) +/* The biggest MMIO address that we allow access to from the debugfs files. */ +#define B43_MAX_MMIO_ACCESS (0xF00 - 1) + +static ssize_t mmio16read__read_file(struct b43_wldev *dev, + char *buf, size_t bufsize) +{ + ssize_t count = 0; + unsigned int addr; + u16 val; + + addr = dev->dfsentry->mmio16read_next; + if (addr > B43_MAX_MMIO_ACCESS) + return -EDESTADDRREQ; + + val = b43_read16(dev, addr); + fappend("0x%04X\n", val); + + return count; +} + +static int mmio16read__write_file(struct b43_wldev *dev, + const char *buf, size_t count) +{ + unsigned int addr; + int res; + + res = sscanf(buf, "0x%X", &addr); + if (res != 1) + return -EINVAL; + if (addr > B43_MAX_MMIO_ACCESS) + return -EADDRNOTAVAIL; + + dev->dfsentry->mmio16read_next = addr; + + return 0; +} + +static int mmio16write__write_file(struct b43_wldev *dev, + const char *buf, size_t count) +{ + unsigned int addr, val; + int res; + + res = sscanf(buf, "0x%X = 0x%X", &addr, &val); + if (res != 2) + return -EINVAL; + if (addr > B43_MAX_MMIO_ACCESS) + return -EADDRNOTAVAIL; + if (val > 0xFFFF) + return -E2BIG; + + b43_write16(dev, addr, val); + + return 0; +} + +static ssize_t mmio32read__read_file(struct b43_wldev *dev, + char *buf, size_t bufsize) +{ + ssize_t count = 0; + unsigned int addr; + u32 val; + + addr = dev->dfsentry->mmio32read_next; + if (addr > B43_MAX_MMIO_ACCESS) + return -EDESTADDRREQ; + + val = b43_read32(dev, addr); + fappend("0x%08X\n", val); + + return count; +} + +static int mmio32read__write_file(struct b43_wldev *dev, + const char *buf, size_t count) +{ + unsigned int addr; + int res; + + res = sscanf(buf, "0x%X", &addr); + if (res != 1) + return -EINVAL; + if (addr > B43_MAX_MMIO_ACCESS) + return -EADDRNOTAVAIL; + + dev->dfsentry->mmio32read_next = addr; + + return 0; +} + +static int mmio32write__write_file(struct b43_wldev *dev, + const char *buf, size_t count) +{ + unsigned int addr, val; + int res; + + res = sscanf(buf, "0x%X = 0x%X", &addr, &val); + if (res != 2) + return -EINVAL; + if (addr > B43_MAX_MMIO_ACCESS) + return -EADDRNOTAVAIL; + if (val > 0xFFFFFFFF) + return -E2BIG; + + b43_write32(dev, addr, val); + + return 0; +} + /* wl->irq_lock is locked */ static ssize_t tsf_read_file(struct b43_wldev *dev, char *buf, size_t bufsize) @@ -496,6 +605,10 @@ out_unlock: .take_irqlock = _take_irqlock, \ } +B43_DEBUGFS_FOPS(mmio16read, mmio16read__read_file, mmio16read__write_file, 1); +B43_DEBUGFS_FOPS(mmio16write, NULL, mmio16write__write_file, 1); +B43_DEBUGFS_FOPS(mmio32read, mmio32read__read_file, mmio32read__write_file, 1); +B43_DEBUGFS_FOPS(mmio32write, NULL, mmio32write__write_file, 1); B43_DEBUGFS_FOPS(tsf, tsf_read_file, tsf_write_file, 1); B43_DEBUGFS_FOPS(ucode_regs, ucode_regs_read_file, NULL, 1); B43_DEBUGFS_FOPS(shm, shm_read_file, NULL, 1); @@ -584,6 +697,9 @@ void b43_debugfs_add_device(struct b43_wldev *dev) return; } + e->mmio16read_next = 0xFFFF; /* invalid address */ + e->mmio32read_next = 0xFFFF; /* invalid address */ + #define ADD_FILE(name, mode) \ do { \ struct dentry *d; \ @@ -596,6 +712,10 @@ void b43_debugfs_add_device(struct b43_wldev *dev) } while (0) + ADD_FILE(mmio16read, 0600); + ADD_FILE(mmio16write, 0200); + ADD_FILE(mmio32read, 0600); + ADD_FILE(mmio32write, 0200); ADD_FILE(tsf, 0600); ADD_FILE(ucode_regs, 0400); ADD_FILE(shm, 0400); @@ -620,6 +740,10 @@ void b43_debugfs_remove_device(struct b43_wldev *dev) return; b43_remove_dynamic_debug(dev); + debugfs_remove(e->file_mmio16read.dentry); + debugfs_remove(e->file_mmio16write.dentry); + debugfs_remove(e->file_mmio32read.dentry); + debugfs_remove(e->file_mmio32write.dentry); debugfs_remove(e->file_tsf.dentry); debugfs_remove(e->file_ucode_regs.dentry); debugfs_remove(e->file_shm.dentry); diff --git a/drivers/net/wireless/b43/debugfs.h b/drivers/net/wireless/b43/debugfs.h index c75cff4151d..d6848696cee 100644 --- a/drivers/net/wireless/b43/debugfs.h +++ b/drivers/net/wireless/b43/debugfs.h @@ -36,6 +36,10 @@ struct b43_dfsentry { struct b43_wldev *dev; struct dentry *subdir; + struct b43_dfs_file file_mmio16read; + struct b43_dfs_file file_mmio16write; + struct b43_dfs_file file_mmio32read; + struct b43_dfs_file file_mmio32write; struct b43_dfs_file file_tsf; struct b43_dfs_file file_ucode_regs; struct b43_dfs_file file_shm; @@ -46,6 +50,11 @@ struct b43_dfsentry { struct b43_txstatus_log txstatlog; + /* The cached address for the next mmio16read file read */ + u16 mmio16read_next; + /* The cached address for the next mmio32read file read */ + u16 mmio32read_next; + /* Enabled/Disabled list for the dynamic debugging features. */ u32 dyn_debug[__B43_NR_DYNDBG]; /* Dentries for the dynamic debugging entries. */ -- cgit v1.2.3 From 6bbc321a96d4d3533eb136b981baba6c8248d635 Mon Sep 17 00:00:00 2001 From: Michael Buesch Date: Thu, 19 Jun 2008 19:33:51 +0200 Subject: b43: Add debugfs files for random SHM access This adds debugfs files for random SHM access. This is needed in order to implement firmware and driver debugging scripts in userspace. Signed-off-by: Michael Buesch Signed-off-by: John W. Linville --- drivers/net/wireless/b43/debugfs.c | 178 +++++++++++++++++++++++++++++++++++++ drivers/net/wireless/b43/debugfs.h | 11 +++ drivers/net/wireless/b43/main.c | 58 ++++++++---- drivers/net/wireless/b43/main.h | 4 + 4 files changed, 234 insertions(+), 17 deletions(-) (limited to 'drivers/net/wireless') diff --git a/drivers/net/wireless/b43/debugfs.c b/drivers/net/wireless/b43/debugfs.c index 9cdd9eca082..dd40ad826c7 100644 --- a/drivers/net/wireless/b43/debugfs.c +++ b/drivers/net/wireless/b43/debugfs.c @@ -74,6 +74,168 @@ struct b43_dfs_file * fops_to_dfs_file(struct b43_wldev *dev, } while (0) +/* The biggest address values for SHM access from the debugfs files. */ +#define B43_MAX_SHM_ROUTING 4 +#define B43_MAX_SHM_ADDR 0xFFFF + +static ssize_t shm16read__read_file(struct b43_wldev *dev, + char *buf, size_t bufsize) +{ + ssize_t count = 0; + unsigned int routing, addr; + u16 val; + + routing = dev->dfsentry->shm16read_routing_next; + addr = dev->dfsentry->shm16read_addr_next; + if ((routing > B43_MAX_SHM_ROUTING) || + (addr > B43_MAX_SHM_ADDR)) + return -EDESTADDRREQ; + + val = b43_shm_read16(dev, routing, addr); + fappend("0x%04X\n", val); + + return count; +} + +static int shm16read__write_file(struct b43_wldev *dev, + const char *buf, size_t count) +{ + unsigned int routing, addr; + int res; + + res = sscanf(buf, "0x%X 0x%X", &routing, &addr); + if (res != 2) + return -EINVAL; + if (routing > B43_MAX_SHM_ROUTING) + return -EADDRNOTAVAIL; + if (addr > B43_MAX_SHM_ADDR) + return -EADDRNOTAVAIL; + if (routing == B43_SHM_SHARED) { + if ((addr % 2) != 0) + return -EADDRNOTAVAIL; + } + + dev->dfsentry->shm16read_routing_next = routing; + dev->dfsentry->shm16read_addr_next = addr; + + return 0; +} + +static int shm16write__write_file(struct b43_wldev *dev, + const char *buf, size_t count) +{ + unsigned int routing, addr, mask, set; + u16 val; + int res; + unsigned long flags; + + res = sscanf(buf, "0x%X 0x%X 0x%X 0x%X", + &routing, &addr, &mask, &set); + if (res != 4) + return -EINVAL; + if (routing > B43_MAX_SHM_ROUTING) + return -EADDRNOTAVAIL; + if (addr > B43_MAX_SHM_ADDR) + return -EADDRNOTAVAIL; + if (routing == B43_SHM_SHARED) { + if ((addr % 2) != 0) + return -EADDRNOTAVAIL; + } + if ((mask > 0xFFFF) || (set > 0xFFFF)) + return -E2BIG; + + spin_lock_irqsave(&dev->wl->shm_lock, flags); + if (mask == 0) + val = 0; + else + val = __b43_shm_read16(dev, routing, addr); + val &= mask; + val |= set; + __b43_shm_write16(dev, routing, addr, val); + spin_unlock_irqrestore(&dev->wl->shm_lock, flags); + + return 0; +} + +static ssize_t shm32read__read_file(struct b43_wldev *dev, + char *buf, size_t bufsize) +{ + ssize_t count = 0; + unsigned int routing, addr; + u32 val; + + routing = dev->dfsentry->shm32read_routing_next; + addr = dev->dfsentry->shm32read_addr_next; + if ((routing > B43_MAX_SHM_ROUTING) || + (addr > B43_MAX_SHM_ADDR)) + return -EDESTADDRREQ; + + val = b43_shm_read32(dev, routing, addr); + fappend("0x%08X\n", val); + + return count; +} + +static int shm32read__write_file(struct b43_wldev *dev, + const char *buf, size_t count) +{ + unsigned int routing, addr; + int res; + + res = sscanf(buf, "0x%X 0x%X", &routing, &addr); + if (res != 2) + return -EINVAL; + if (routing > B43_MAX_SHM_ROUTING) + return -EADDRNOTAVAIL; + if (addr > B43_MAX_SHM_ADDR) + return -EADDRNOTAVAIL; + if (routing == B43_SHM_SHARED) { + if ((addr % 2) != 0) + return -EADDRNOTAVAIL; + } + + dev->dfsentry->shm32read_routing_next = routing; + dev->dfsentry->shm32read_addr_next = addr; + + return 0; +} + +static int shm32write__write_file(struct b43_wldev *dev, + const char *buf, size_t count) +{ + unsigned int routing, addr, mask, set; + u32 val; + int res; + unsigned long flags; + + res = sscanf(buf, "0x%X 0x%X 0x%X 0x%X", + &routing, &addr, &mask, &set); + if (res != 4) + return -EINVAL; + if (routing > B43_MAX_SHM_ROUTING) + return -EADDRNOTAVAIL; + if (addr > B43_MAX_SHM_ADDR) + return -EADDRNOTAVAIL; + if (routing == B43_SHM_SHARED) { + if ((addr % 2) != 0) + return -EADDRNOTAVAIL; + } + if ((mask > 0xFFFFFFFF) || (set > 0xFFFFFFFF)) + return -E2BIG; + + spin_lock_irqsave(&dev->wl->shm_lock, flags); + if (mask == 0) + val = 0; + else + val = __b43_shm_read32(dev, routing, addr); + val &= mask; + val |= set; + __b43_shm_write32(dev, routing, addr, val); + spin_unlock_irqrestore(&dev->wl->shm_lock, flags); + + return 0; +} + /* The biggest MMIO address that we allow access to from the debugfs files. */ #define B43_MAX_MMIO_ACCESS (0xF00 - 1) @@ -605,6 +767,10 @@ out_unlock: .take_irqlock = _take_irqlock, \ } +B43_DEBUGFS_FOPS(shm16read, shm16read__read_file, shm16read__write_file, 1); +B43_DEBUGFS_FOPS(shm16write, NULL, shm16write__write_file, 1); +B43_DEBUGFS_FOPS(shm32read, shm32read__read_file, shm32read__write_file, 1); +B43_DEBUGFS_FOPS(shm32write, NULL, shm32write__write_file, 1); B43_DEBUGFS_FOPS(mmio16read, mmio16read__read_file, mmio16read__write_file, 1); B43_DEBUGFS_FOPS(mmio16write, NULL, mmio16write__write_file, 1); B43_DEBUGFS_FOPS(mmio32read, mmio32read__read_file, mmio32read__write_file, 1); @@ -699,6 +865,10 @@ void b43_debugfs_add_device(struct b43_wldev *dev) e->mmio16read_next = 0xFFFF; /* invalid address */ e->mmio32read_next = 0xFFFF; /* invalid address */ + e->shm16read_routing_next = 0xFFFFFFFF; /* invalid routing */ + e->shm16read_addr_next = 0xFFFFFFFF; /* invalid address */ + e->shm32read_routing_next = 0xFFFFFFFF; /* invalid routing */ + e->shm32read_addr_next = 0xFFFFFFFF; /* invalid address */ #define ADD_FILE(name, mode) \ do { \ @@ -712,6 +882,10 @@ void b43_debugfs_add_device(struct b43_wldev *dev) } while (0) + ADD_FILE(shm16read, 0600); + ADD_FILE(shm16write, 0200); + ADD_FILE(shm32read, 0600); + ADD_FILE(shm32write, 0200); ADD_FILE(mmio16read, 0600); ADD_FILE(mmio16write, 0200); ADD_FILE(mmio32read, 0600); @@ -740,6 +914,10 @@ void b43_debugfs_remove_device(struct b43_wldev *dev) return; b43_remove_dynamic_debug(dev); + debugfs_remove(e->file_shm16read.dentry); + debugfs_remove(e->file_shm16write.dentry); + debugfs_remove(e->file_shm32read.dentry); + debugfs_remove(e->file_shm32write.dentry); debugfs_remove(e->file_mmio16read.dentry); debugfs_remove(e->file_mmio16write.dentry); debugfs_remove(e->file_mmio32read.dentry); diff --git a/drivers/net/wireless/b43/debugfs.h b/drivers/net/wireless/b43/debugfs.h index d6848696cee..f06f7bc1edc 100644 --- a/drivers/net/wireless/b43/debugfs.h +++ b/drivers/net/wireless/b43/debugfs.h @@ -36,6 +36,10 @@ struct b43_dfsentry { struct b43_wldev *dev; struct dentry *subdir; + struct b43_dfs_file file_shm16read; + struct b43_dfs_file file_shm16write; + struct b43_dfs_file file_shm32read; + struct b43_dfs_file file_shm32write; struct b43_dfs_file file_mmio16read; struct b43_dfs_file file_mmio16write; struct b43_dfs_file file_mmio32read; @@ -55,6 +59,13 @@ struct b43_dfsentry { /* The cached address for the next mmio32read file read */ u16 mmio32read_next; + /* The cached address for the next shm16read file read */ + u32 shm16read_routing_next; + u32 shm16read_addr_next; + /* The cached address for the next shm32read file read */ + u32 shm32read_routing_next; + u32 shm32read_addr_next; + /* Enabled/Disabled list for the dynamic debugging features. */ u32 dyn_debug[__B43_NR_DYNDBG]; /* Dentries for the dynamic debugging entries. */ diff --git a/drivers/net/wireless/b43/main.c b/drivers/net/wireless/b43/main.c index 7bca8e98151..69272b9bdb6 100644 --- a/drivers/net/wireless/b43/main.c +++ b/drivers/net/wireless/b43/main.c @@ -373,13 +373,10 @@ static inline void b43_shm_control_word(struct b43_wldev *dev, b43_write32(dev, B43_MMIO_SHM_CONTROL, control); } -u32 b43_shm_read32(struct b43_wldev *dev, u16 routing, u16 offset) +u32 __b43_shm_read32(struct b43_wldev *dev, u16 routing, u16 offset) { - struct b43_wl *wl = dev->wl; - unsigned long flags; u32 ret; - spin_lock_irqsave(&wl->shm_lock, flags); if (routing == B43_SHM_SHARED) { B43_WARN_ON(offset & 0x0001); if (offset & 0x0003) { @@ -397,18 +394,26 @@ u32 b43_shm_read32(struct b43_wldev *dev, u16 routing, u16 offset) b43_shm_control_word(dev, routing, offset); ret = b43_read32(dev, B43_MMIO_SHM_DATA); out: - spin_unlock_irqrestore(&wl->shm_lock, flags); - return ret; } -u16 b43_shm_read16(struct b43_wldev * dev, u16 routing, u16 offset) +u32 b43_shm_read32(struct b43_wldev *dev, u16 routing, u16 offset) { struct b43_wl *wl = dev->wl; unsigned long flags; - u16 ret; + u32 ret; spin_lock_irqsave(&wl->shm_lock, flags); + ret = __b43_shm_read32(dev, routing, offset); + spin_unlock_irqrestore(&wl->shm_lock, flags); + + return ret; +} + +u16 __b43_shm_read16(struct b43_wldev *dev, u16 routing, u16 offset) +{ + u16 ret; + if (routing == B43_SHM_SHARED) { B43_WARN_ON(offset & 0x0001); if (offset & 0x0003) { @@ -423,17 +428,24 @@ u16 b43_shm_read16(struct b43_wldev * dev, u16 routing, u16 offset) b43_shm_control_word(dev, routing, offset); ret = b43_read16(dev, B43_MMIO_SHM_DATA); out: - spin_unlock_irqrestore(&wl->shm_lock, flags); - return ret; } -void b43_shm_write32(struct b43_wldev *dev, u16 routing, u16 offset, u32 value) +u16 b43_shm_read16(struct b43_wldev *dev, u16 routing, u16 offset) { struct b43_wl *wl = dev->wl; unsigned long flags; + u16 ret; spin_lock_irqsave(&wl->shm_lock, flags); + ret = __b43_shm_read16(dev, routing, offset); + spin_unlock_irqrestore(&wl->shm_lock, flags); + + return ret; +} + +void __b43_shm_write32(struct b43_wldev *dev, u16 routing, u16 offset, u32 value) +{ if (routing == B43_SHM_SHARED) { B43_WARN_ON(offset & 0x0001); if (offset & 0x0003) { @@ -443,35 +455,47 @@ void b43_shm_write32(struct b43_wldev *dev, u16 routing, u16 offset, u32 value) (value >> 16) & 0xffff); b43_shm_control_word(dev, routing, (offset >> 2) + 1); b43_write16(dev, B43_MMIO_SHM_DATA, value & 0xffff); - goto out; + return; } offset >>= 2; } b43_shm_control_word(dev, routing, offset); b43_write32(dev, B43_MMIO_SHM_DATA, value); -out: - spin_unlock_irqrestore(&wl->shm_lock, flags); } -void b43_shm_write16(struct b43_wldev *dev, u16 routing, u16 offset, u16 value) +void b43_shm_write32(struct b43_wldev *dev, u16 routing, u16 offset, u32 value) { struct b43_wl *wl = dev->wl; unsigned long flags; spin_lock_irqsave(&wl->shm_lock, flags); + __b43_shm_write32(dev, routing, offset, value); + spin_unlock_irqrestore(&wl->shm_lock, flags); +} + +void __b43_shm_write16(struct b43_wldev *dev, u16 routing, u16 offset, u16 value) +{ if (routing == B43_SHM_SHARED) { B43_WARN_ON(offset & 0x0001); if (offset & 0x0003) { /* Unaligned access */ b43_shm_control_word(dev, routing, offset >> 2); b43_write16(dev, B43_MMIO_SHM_DATA_UNALIGNED, value); - goto out; + return; } offset >>= 2; } b43_shm_control_word(dev, routing, offset); b43_write16(dev, B43_MMIO_SHM_DATA, value); -out: +} + +void b43_shm_write16(struct b43_wldev *dev, u16 routing, u16 offset, u16 value) +{ + struct b43_wl *wl = dev->wl; + unsigned long flags; + + spin_lock_irqsave(&wl->shm_lock, flags); + __b43_shm_write16(dev, routing, offset, value); spin_unlock_irqrestore(&wl->shm_lock, flags); } diff --git a/drivers/net/wireless/b43/main.h b/drivers/net/wireless/b43/main.h index dad23c42b42..f871a252cb5 100644 --- a/drivers/net/wireless/b43/main.h +++ b/drivers/net/wireless/b43/main.h @@ -95,9 +95,13 @@ void b43_tsf_read(struct b43_wldev *dev, u64 * tsf); void b43_tsf_write(struct b43_wldev *dev, u64 tsf); u32 b43_shm_read32(struct b43_wldev *dev, u16 routing, u16 offset); +u32 __b43_shm_read32(struct b43_wldev *dev, u16 routing, u16 offset); u16 b43_shm_read16(struct b43_wldev *dev, u16 routing, u16 offset); +u16 __b43_shm_read16(struct b43_wldev *dev, u16 routing, u16 offset); void b43_shm_write32(struct b43_wldev *dev, u16 routing, u16 offset, u32 value); +void __b43_shm_write32(struct b43_wldev *dev, u16 routing, u16 offset, u32 value); void b43_shm_write16(struct b43_wldev *dev, u16 routing, u16 offset, u16 value); +void __b43_shm_write16(struct b43_wldev *dev, u16 routing, u16 offset, u16 value); u64 b43_hf_read(struct b43_wldev *dev); void b43_hf_write(struct b43_wldev *dev, u64 value); -- cgit v1.2.3 From efa275822b50ab942c79ba26f053f9a0cd220e9e Mon Sep 17 00:00:00 2001 From: Michael Buesch Date: Thu, 19 Jun 2008 19:38:32 +0200 Subject: b43: Add mask/set capability to debugfs MMIO interface This adds an atomic mask/set capability to the debugfs MMIO interface. This is needed to support mask and/or set operations from the userspace debugging tools. Signed-off-by: Michael Buesch Signed-off-by: John W. Linville --- drivers/net/wireless/b43/debugfs.c | 38 ++++++++++++++++++++++++++++++-------- 1 file changed, 30 insertions(+), 8 deletions(-) (limited to 'drivers/net/wireless') diff --git a/drivers/net/wireless/b43/debugfs.c b/drivers/net/wireless/b43/debugfs.c index dd40ad826c7..cfe8e202e4c 100644 --- a/drivers/net/wireless/b43/debugfs.c +++ b/drivers/net/wireless/b43/debugfs.c @@ -267,6 +267,8 @@ static int mmio16read__write_file(struct b43_wldev *dev, return -EINVAL; if (addr > B43_MAX_MMIO_ACCESS) return -EADDRNOTAVAIL; + if ((addr % 2) != 0) + return -EINVAL; dev->dfsentry->mmio16read_next = addr; @@ -276,17 +278,26 @@ static int mmio16read__write_file(struct b43_wldev *dev, static int mmio16write__write_file(struct b43_wldev *dev, const char *buf, size_t count) { - unsigned int addr, val; + unsigned int addr, mask, set; int res; + u16 val; - res = sscanf(buf, "0x%X = 0x%X", &addr, &val); - if (res != 2) + res = sscanf(buf, "0x%X 0x%X 0x%X", &addr, &mask, &set); + if (res != 3) return -EINVAL; if (addr > B43_MAX_MMIO_ACCESS) return -EADDRNOTAVAIL; - if (val > 0xFFFF) + if ((mask > 0xFFFF) || (set > 0xFFFF)) return -E2BIG; + if ((addr % 2) != 0) + return -EINVAL; + if (mask == 0) + val = 0; + else + val = b43_read16(dev, addr); + val &= mask; + val |= set; b43_write16(dev, addr, val); return 0; @@ -320,6 +331,8 @@ static int mmio32read__write_file(struct b43_wldev *dev, return -EINVAL; if (addr > B43_MAX_MMIO_ACCESS) return -EADDRNOTAVAIL; + if ((addr % 4) != 0) + return -EINVAL; dev->dfsentry->mmio32read_next = addr; @@ -329,17 +342,26 @@ static int mmio32read__write_file(struct b43_wldev *dev, static int mmio32write__write_file(struct b43_wldev *dev, const char *buf, size_t count) { - unsigned int addr, val; + unsigned int addr, mask, set; int res; + u32 val; - res = sscanf(buf, "0x%X = 0x%X", &addr, &val); - if (res != 2) + res = sscanf(buf, "0x%X 0x%X 0x%X", &addr, &mask, &set); + if (res != 3) return -EINVAL; if (addr > B43_MAX_MMIO_ACCESS) return -EADDRNOTAVAIL; - if (val > 0xFFFFFFFF) + if ((mask > 0xFFFFFFFF) || (set > 0xFFFFFFFF)) return -E2BIG; + if ((addr % 4) != 0) + return -EINVAL; + if (mask == 0) + val = 0; + else + val = b43_read32(dev, addr); + val &= mask; + val |= set; b43_write32(dev, addr, val); return 0; -- cgit v1.2.3 From 9965183a78ad5303b9154184a0f4056844e8baae Mon Sep 17 00:00:00 2001 From: Michael Buesch Date: Fri, 20 Jun 2008 01:01:50 +0200 Subject: b43: Remove "shm" and "ucode_regs" debugfs files We don't need these two dump-files anymore, as we can easily do this in userspace now. Use b43-fwdump from the b43-tools repository to dump microcode registers. Use "b43-fwdump -s" to dump SHM (or use -S to do a binary dump) Signed-off-by: Michael Buesch Signed-off-by: John W. Linville --- drivers/net/wireless/b43/debugfs.c | 42 -------------------------------------- drivers/net/wireless/b43/debugfs.h | 2 -- 2 files changed, 44 deletions(-) (limited to 'drivers/net/wireless') diff --git a/drivers/net/wireless/b43/debugfs.c b/drivers/net/wireless/b43/debugfs.c index cfe8e202e4c..24854c3e89c 100644 --- a/drivers/net/wireless/b43/debugfs.c +++ b/drivers/net/wireless/b43/debugfs.c @@ -395,42 +395,6 @@ static int tsf_write_file(struct b43_wldev *dev, return 0; } -/* wl->irq_lock is locked */ -static ssize_t ucode_regs_read_file(struct b43_wldev *dev, - char *buf, size_t bufsize) -{ - ssize_t count = 0; - int i; - - for (i = 0; i < 64; i++) { - fappend("r%d = 0x%04x\n", i, - b43_shm_read16(dev, B43_SHM_SCRATCH, i)); - } - - return count; -} - -/* wl->irq_lock is locked */ -static ssize_t shm_read_file(struct b43_wldev *dev, - char *buf, size_t bufsize) -{ - ssize_t count = 0; - int i; - u16 tmp; - __le16 *le16buf = (__le16 *)buf; - - for (i = 0; i < 0x1000; i++) { - if (bufsize < sizeof(tmp)) - break; - tmp = b43_shm_read16(dev, B43_SHM_SHARED, 2 * i); - le16buf[i] = cpu_to_le16(tmp); - count += sizeof(tmp); - bufsize -= sizeof(tmp); - } - - return count; -} - static ssize_t txstat_read_file(struct b43_wldev *dev, char *buf, size_t bufsize) { @@ -798,8 +762,6 @@ B43_DEBUGFS_FOPS(mmio16write, NULL, mmio16write__write_file, 1); B43_DEBUGFS_FOPS(mmio32read, mmio32read__read_file, mmio32read__write_file, 1); B43_DEBUGFS_FOPS(mmio32write, NULL, mmio32write__write_file, 1); B43_DEBUGFS_FOPS(tsf, tsf_read_file, tsf_write_file, 1); -B43_DEBUGFS_FOPS(ucode_regs, ucode_regs_read_file, NULL, 1); -B43_DEBUGFS_FOPS(shm, shm_read_file, NULL, 1); B43_DEBUGFS_FOPS(txstat, txstat_read_file, NULL, 0); B43_DEBUGFS_FOPS(txpower_g, txpower_g_read_file, txpower_g_write_file, 0); B43_DEBUGFS_FOPS(restart, NULL, restart_write_file, 1); @@ -913,8 +875,6 @@ void b43_debugfs_add_device(struct b43_wldev *dev) ADD_FILE(mmio32read, 0600); ADD_FILE(mmio32write, 0200); ADD_FILE(tsf, 0600); - ADD_FILE(ucode_regs, 0400); - ADD_FILE(shm, 0400); ADD_FILE(txstat, 0400); ADD_FILE(txpower_g, 0600); ADD_FILE(restart, 0200); @@ -945,8 +905,6 @@ void b43_debugfs_remove_device(struct b43_wldev *dev) debugfs_remove(e->file_mmio32read.dentry); debugfs_remove(e->file_mmio32write.dentry); debugfs_remove(e->file_tsf.dentry); - debugfs_remove(e->file_ucode_regs.dentry); - debugfs_remove(e->file_shm.dentry); debugfs_remove(e->file_txstat.dentry); debugfs_remove(e->file_txpower_g.dentry); debugfs_remove(e->file_restart.dentry); diff --git a/drivers/net/wireless/b43/debugfs.h b/drivers/net/wireless/b43/debugfs.h index f06f7bc1edc..132c81f2f98 100644 --- a/drivers/net/wireless/b43/debugfs.h +++ b/drivers/net/wireless/b43/debugfs.h @@ -45,8 +45,6 @@ struct b43_dfsentry { struct b43_dfs_file file_mmio32read; struct b43_dfs_file file_mmio32write; struct b43_dfs_file file_tsf; - struct b43_dfs_file file_ucode_regs; - struct b43_dfs_file file_shm; struct b43_dfs_file file_txstat; struct b43_dfs_file file_txpower_g; struct b43_dfs_file file_restart; -- cgit v1.2.3 From 316af76f3475bb73dbb11f1c6d549ae589efb3d0 Mon Sep 17 00:00:00 2001 From: Harvey Harrison Date: Sat, 21 Jun 2008 19:33:20 -0700 Subject: adm8211: remove unnecessary protected bit mask/check Removes now unused fc local var and uses the new ieee80211_hdrlen which directly uses the le16 frame control value. Signed-off-by: Harvey Harrison Signed-off-by: John W. Linville --- drivers/net/wireless/adm8211.c | 9 +-------- 1 file changed, 1 insertion(+), 8 deletions(-) (limited to 'drivers/net/wireless') diff --git a/drivers/net/wireless/adm8211.c b/drivers/net/wireless/adm8211.c index 0ba55ba9395..3333d4596b8 100644 --- a/drivers/net/wireless/adm8211.c +++ b/drivers/net/wireless/adm8211.c @@ -1685,7 +1685,6 @@ static void adm8211_tx_raw(struct ieee80211_hw *dev, struct sk_buff *skb, static int adm8211_tx(struct ieee80211_hw *dev, struct sk_buff *skb) { struct adm8211_tx_hdr *txhdr; - u16 fc; size_t payload_len, hdrlen; int plcp, dur, len, plcp_signal, short_preamble; struct ieee80211_hdr *hdr; @@ -1696,8 +1695,7 @@ static int adm8211_tx(struct ieee80211_hw *dev, struct sk_buff *skb) plcp_signal = txrate->bitrate; hdr = (struct ieee80211_hdr *)skb->data; - fc = le16_to_cpu(hdr->frame_control) & ~IEEE80211_FCTL_PROTECTED; - hdrlen = ieee80211_get_hdrlen(fc); + hdrlen = ieee80211_hdrlen(hdr->frame_control); memcpy(skb->cb, skb->data, hdrlen); hdr = (struct ieee80211_hdr *)skb->cb; skb_pull(skb, hdrlen); @@ -1711,8 +1709,6 @@ static int adm8211_tx(struct ieee80211_hw *dev, struct sk_buff *skb) txhdr->frame_control = hdr->frame_control; len = hdrlen + payload_len + FCS_LEN; - if (fc & IEEE80211_FCTL_PROTECTED) - len += 8; txhdr->frag = cpu_to_le16(0x0FFF); adm8211_calc_durations(&dur, &plcp, payload_len, @@ -1730,9 +1726,6 @@ static int adm8211_tx(struct ieee80211_hw *dev, struct sk_buff *skb) if (info->flags & IEEE80211_TX_CTL_USE_RTS_CTS) txhdr->header_control |= cpu_to_le16(ADM8211_TXHDRCTL_ENABLE_RTS); - if (fc & IEEE80211_FCTL_PROTECTED) - txhdr->header_control |= cpu_to_le16(ADM8211_TXHDRCTL_ENABLE_WEP_ENGINE); - txhdr->retry_limit = info->control.retry_limit; adm8211_tx_raw(dev, skb, plcp_signal, hdrlen); -- cgit v1.2.3 From f225763a7d6c92c4932dbd528437997078496fcc Mon Sep 17 00:00:00 2001 From: Michael Buesch Date: Fri, 20 Jun 2008 11:50:29 +0200 Subject: ssb, b43, b43legacy, b44: Rewrite SSB DMA API This is a rewrite of the DMA API for SSB devices. This is needed, because the old (non-existing) "API" made too many bad assumptions on the API of the host-bus (PCI). This introduces an almost complete SSB-DMA-API that maps to the lowlevel bus-API based on the bustype. Signed-off-by: Michael Buesch Signed-off-by: John W. Linville --- drivers/net/b44.c | 140 +++++++++++++++++----------------- drivers/net/wireless/b43/dma.c | 65 ++++++++-------- drivers/net/wireless/b43legacy/dma.c | 63 ++++++++------- drivers/ssb/Kconfig | 2 +- drivers/ssb/main.c | 75 ++++++++++++++---- include/linux/ssb/ssb.h | 143 ++++++++++++++++++++++++++++++++++- 6 files changed, 336 insertions(+), 152 deletions(-) (limited to 'drivers/net/wireless') diff --git a/drivers/net/b44.c b/drivers/net/b44.c index 59dce6aa086..c3bda5ce67c 100644 --- a/drivers/net/b44.c +++ b/drivers/net/b44.c @@ -148,9 +148,9 @@ static inline void b44_sync_dma_desc_for_device(struct ssb_device *sdev, unsigned long offset, enum dma_data_direction dir) { - dma_sync_single_range_for_device(sdev->dma_dev, dma_base, - offset & dma_desc_align_mask, - dma_desc_sync_size, dir); + ssb_dma_sync_single_range_for_device(sdev, dma_base, + offset & dma_desc_align_mask, + dma_desc_sync_size, dir); } static inline void b44_sync_dma_desc_for_cpu(struct ssb_device *sdev, @@ -158,9 +158,9 @@ static inline void b44_sync_dma_desc_for_cpu(struct ssb_device *sdev, unsigned long offset, enum dma_data_direction dir) { - dma_sync_single_range_for_cpu(sdev->dma_dev, dma_base, - offset & dma_desc_align_mask, - dma_desc_sync_size, dir); + ssb_dma_sync_single_range_for_cpu(sdev, dma_base, + offset & dma_desc_align_mask, + dma_desc_sync_size, dir); } static inline unsigned long br32(const struct b44 *bp, unsigned long reg) @@ -613,10 +613,10 @@ static void b44_tx(struct b44 *bp) BUG_ON(skb == NULL); - dma_unmap_single(bp->sdev->dma_dev, - rp->mapping, - skb->len, - DMA_TO_DEVICE); + ssb_dma_unmap_single(bp->sdev, + rp->mapping, + skb->len, + DMA_TO_DEVICE); rp->skb = NULL; dev_kfree_skb_irq(skb); } @@ -653,29 +653,29 @@ static int b44_alloc_rx_skb(struct b44 *bp, int src_idx, u32 dest_idx_unmasked) if (skb == NULL) return -ENOMEM; - mapping = dma_map_single(bp->sdev->dma_dev, skb->data, - RX_PKT_BUF_SZ, - DMA_FROM_DEVICE); + mapping = ssb_dma_map_single(bp->sdev, skb->data, + RX_PKT_BUF_SZ, + DMA_FROM_DEVICE); /* Hardware bug work-around, the chip is unable to do PCI DMA to/from anything above 1GB :-( */ - if (dma_mapping_error(mapping) || + if (ssb_dma_mapping_error(bp->sdev, mapping) || mapping + RX_PKT_BUF_SZ > DMA_30BIT_MASK) { /* Sigh... */ - if (!dma_mapping_error(mapping)) - dma_unmap_single(bp->sdev->dma_dev, mapping, - RX_PKT_BUF_SZ, DMA_FROM_DEVICE); + if (!ssb_dma_mapping_error(bp->sdev, mapping)) + ssb_dma_unmap_single(bp->sdev, mapping, + RX_PKT_BUF_SZ, DMA_FROM_DEVICE); dev_kfree_skb_any(skb); skb = __netdev_alloc_skb(bp->dev, RX_PKT_BUF_SZ, GFP_ATOMIC|GFP_DMA); if (skb == NULL) return -ENOMEM; - mapping = dma_map_single(bp->sdev->dma_dev, skb->data, - RX_PKT_BUF_SZ, - DMA_FROM_DEVICE); - if (dma_mapping_error(mapping) || + mapping = ssb_dma_map_single(bp->sdev, skb->data, + RX_PKT_BUF_SZ, + DMA_FROM_DEVICE); + if (ssb_dma_mapping_error(bp->sdev, mapping) || mapping + RX_PKT_BUF_SZ > DMA_30BIT_MASK) { - if (!dma_mapping_error(mapping)) - dma_unmap_single(bp->sdev->dma_dev, mapping, RX_PKT_BUF_SZ,DMA_FROM_DEVICE); + if (!ssb_dma_mapping_error(bp->sdev, mapping)) + ssb_dma_unmap_single(bp->sdev, mapping, RX_PKT_BUF_SZ,DMA_FROM_DEVICE); dev_kfree_skb_any(skb); return -ENOMEM; } @@ -750,9 +750,9 @@ static void b44_recycle_rx(struct b44 *bp, int src_idx, u32 dest_idx_unmasked) dest_idx * sizeof(dest_desc), DMA_BIDIRECTIONAL); - dma_sync_single_for_device(bp->sdev->dma_dev, le32_to_cpu(src_desc->addr), - RX_PKT_BUF_SZ, - DMA_FROM_DEVICE); + ssb_dma_sync_single_for_device(bp->sdev, le32_to_cpu(src_desc->addr), + RX_PKT_BUF_SZ, + DMA_FROM_DEVICE); } static int b44_rx(struct b44 *bp, int budget) @@ -772,7 +772,7 @@ static int b44_rx(struct b44 *bp, int budget) struct rx_header *rh; u16 len; - dma_sync_single_for_cpu(bp->sdev->dma_dev, map, + ssb_dma_sync_single_for_cpu(bp->sdev, map, RX_PKT_BUF_SZ, DMA_FROM_DEVICE); rh = (struct rx_header *) skb->data; @@ -806,8 +806,8 @@ static int b44_rx(struct b44 *bp, int budget) skb_size = b44_alloc_rx_skb(bp, cons, bp->rx_prod); if (skb_size < 0) goto drop_it; - dma_unmap_single(bp->sdev->dma_dev, map, - skb_size, DMA_FROM_DEVICE); + ssb_dma_unmap_single(bp->sdev, map, + skb_size, DMA_FROM_DEVICE); /* Leave out rx_header */ skb_put(skb, len + RX_PKT_OFFSET); skb_pull(skb, RX_PKT_OFFSET); @@ -966,25 +966,25 @@ static int b44_start_xmit(struct sk_buff *skb, struct net_device *dev) goto err_out; } - mapping = dma_map_single(bp->sdev->dma_dev, skb->data, len, DMA_TO_DEVICE); - if (dma_mapping_error(mapping) || mapping + len > DMA_30BIT_MASK) { + mapping = ssb_dma_map_single(bp->sdev, skb->data, len, DMA_TO_DEVICE); + if (ssb_dma_mapping_error(bp->sdev, mapping) || mapping + len > DMA_30BIT_MASK) { struct sk_buff *bounce_skb; /* Chip can't handle DMA to/from >1GB, use bounce buffer */ - if (!dma_mapping_error(mapping)) - dma_unmap_single(bp->sdev->dma_dev, mapping, len, - DMA_TO_DEVICE); + if (!ssb_dma_mapping_error(bp->sdev, mapping)) + ssb_dma_unmap_single(bp->sdev, mapping, len, + DMA_TO_DEVICE); bounce_skb = __dev_alloc_skb(len, GFP_ATOMIC | GFP_DMA); if (!bounce_skb) goto err_out; - mapping = dma_map_single(bp->sdev->dma_dev, bounce_skb->data, - len, DMA_TO_DEVICE); - if (dma_mapping_error(mapping) || mapping + len > DMA_30BIT_MASK) { - if (!dma_mapping_error(mapping)) - dma_unmap_single(bp->sdev->dma_dev, mapping, - len, DMA_TO_DEVICE); + mapping = ssb_dma_map_single(bp->sdev, bounce_skb->data, + len, DMA_TO_DEVICE); + if (ssb_dma_mapping_error(bp->sdev, mapping) || mapping + len > DMA_30BIT_MASK) { + if (!ssb_dma_mapping_error(bp->sdev, mapping)) + ssb_dma_unmap_single(bp->sdev, mapping, + len, DMA_TO_DEVICE); dev_kfree_skb_any(bounce_skb); goto err_out; } @@ -1082,8 +1082,8 @@ static void b44_free_rings(struct b44 *bp) if (rp->skb == NULL) continue; - dma_unmap_single(bp->sdev->dma_dev, rp->mapping, RX_PKT_BUF_SZ, - DMA_FROM_DEVICE); + ssb_dma_unmap_single(bp->sdev, rp->mapping, RX_PKT_BUF_SZ, + DMA_FROM_DEVICE); dev_kfree_skb_any(rp->skb); rp->skb = NULL; } @@ -1094,8 +1094,8 @@ static void b44_free_rings(struct b44 *bp) if (rp->skb == NULL) continue; - dma_unmap_single(bp->sdev->dma_dev, rp->mapping, rp->skb->len, - DMA_TO_DEVICE); + ssb_dma_unmap_single(bp->sdev, rp->mapping, rp->skb->len, + DMA_TO_DEVICE); dev_kfree_skb_any(rp->skb); rp->skb = NULL; } @@ -1117,14 +1117,14 @@ static void b44_init_rings(struct b44 *bp) memset(bp->tx_ring, 0, B44_TX_RING_BYTES); if (bp->flags & B44_FLAG_RX_RING_HACK) - dma_sync_single_for_device(bp->sdev->dma_dev, bp->rx_ring_dma, - DMA_TABLE_BYTES, - DMA_BIDIRECTIONAL); + ssb_dma_sync_single_for_device(bp->sdev, bp->rx_ring_dma, + DMA_TABLE_BYTES, + DMA_BIDIRECTIONAL); if (bp->flags & B44_FLAG_TX_RING_HACK) - dma_sync_single_for_device(bp->sdev->dma_dev, bp->tx_ring_dma, - DMA_TABLE_BYTES, - DMA_TO_DEVICE); + ssb_dma_sync_single_for_device(bp->sdev, bp->tx_ring_dma, + DMA_TABLE_BYTES, + DMA_TO_DEVICE); for (i = 0; i < bp->rx_pending; i++) { if (b44_alloc_rx_skb(bp, -1, i) < 0) @@ -1144,25 +1144,27 @@ static void b44_free_consistent(struct b44 *bp) bp->tx_buffers = NULL; if (bp->rx_ring) { if (bp->flags & B44_FLAG_RX_RING_HACK) { - dma_unmap_single(bp->sdev->dma_dev, bp->rx_ring_dma, - DMA_TABLE_BYTES, - DMA_BIDIRECTIONAL); + ssb_dma_unmap_single(bp->sdev, bp->rx_ring_dma, + DMA_TABLE_BYTES, + DMA_BIDIRECTIONAL); kfree(bp->rx_ring); } else - dma_free_coherent(bp->sdev->dma_dev, DMA_TABLE_BYTES, - bp->rx_ring, bp->rx_ring_dma); + ssb_dma_free_consistent(bp->sdev, DMA_TABLE_BYTES, + bp->rx_ring, bp->rx_ring_dma, + GFP_KERNEL); bp->rx_ring = NULL; bp->flags &= ~B44_FLAG_RX_RING_HACK; } if (bp->tx_ring) { if (bp->flags & B44_FLAG_TX_RING_HACK) { - dma_unmap_single(bp->sdev->dma_dev, bp->tx_ring_dma, - DMA_TABLE_BYTES, - DMA_TO_DEVICE); + ssb_dma_unmap_single(bp->sdev, bp->tx_ring_dma, + DMA_TABLE_BYTES, + DMA_TO_DEVICE); kfree(bp->tx_ring); } else - dma_free_coherent(bp->sdev->dma_dev, DMA_TABLE_BYTES, - bp->tx_ring, bp->tx_ring_dma); + ssb_dma_free_consistent(bp->sdev, DMA_TABLE_BYTES, + bp->tx_ring, bp->tx_ring_dma, + GFP_KERNEL); bp->tx_ring = NULL; bp->flags &= ~B44_FLAG_TX_RING_HACK; } @@ -1187,7 +1189,7 @@ static int b44_alloc_consistent(struct b44 *bp, gfp_t gfp) goto out_err; size = DMA_TABLE_BYTES; - bp->rx_ring = dma_alloc_coherent(bp->sdev->dma_dev, size, &bp->rx_ring_dma, gfp); + bp->rx_ring = ssb_dma_alloc_consistent(bp->sdev, size, &bp->rx_ring_dma, gfp); if (!bp->rx_ring) { /* Allocation may have failed due to pci_alloc_consistent insisting on use of GFP_DMA, which is more restrictive @@ -1199,11 +1201,11 @@ static int b44_alloc_consistent(struct b44 *bp, gfp_t gfp) if (!rx_ring) goto out_err; - rx_ring_dma = dma_map_single(bp->sdev->dma_dev, rx_ring, - DMA_TABLE_BYTES, - DMA_BIDIRECTIONAL); + rx_ring_dma = ssb_dma_map_single(bp->sdev, rx_ring, + DMA_TABLE_BYTES, + DMA_BIDIRECTIONAL); - if (dma_mapping_error(rx_ring_dma) || + if (ssb_dma_mapping_error(bp->sdev, rx_ring_dma) || rx_ring_dma + size > DMA_30BIT_MASK) { kfree(rx_ring); goto out_err; @@ -1214,9 +1216,9 @@ static int b44_alloc_consistent(struct b44 *bp, gfp_t gfp) bp->flags |= B44_FLAG_RX_RING_HACK; } - bp->tx_ring = dma_alloc_coherent(bp->sdev->dma_dev, size, &bp->tx_ring_dma, gfp); + bp->tx_ring = ssb_dma_alloc_consistent(bp->sdev, size, &bp->tx_ring_dma, gfp); if (!bp->tx_ring) { - /* Allocation may have failed due to dma_alloc_coherent + /* Allocation may have failed due to ssb_dma_alloc_consistent insisting on use of GFP_DMA, which is more restrictive than necessary... */ struct dma_desc *tx_ring; @@ -1226,11 +1228,11 @@ static int b44_alloc_consistent(struct b44 *bp, gfp_t gfp) if (!tx_ring) goto out_err; - tx_ring_dma = dma_map_single(bp->sdev->dma_dev, tx_ring, + tx_ring_dma = ssb_dma_map_single(bp->sdev, tx_ring, DMA_TABLE_BYTES, DMA_TO_DEVICE); - if (dma_mapping_error(tx_ring_dma) || + if (ssb_dma_mapping_error(bp->sdev, tx_ring_dma) || tx_ring_dma + size > DMA_30BIT_MASK) { kfree(tx_ring); goto out_err; diff --git a/drivers/net/wireless/b43/dma.c b/drivers/net/wireless/b43/dma.c index 8a09a1db08d..098f886976f 100644 --- a/drivers/net/wireless/b43/dma.c +++ b/drivers/net/wireless/b43/dma.c @@ -328,11 +328,11 @@ static inline dma_addr_t dmaaddr; if (tx) { - dmaaddr = dma_map_single(ring->dev->dev->dma_dev, - buf, len, DMA_TO_DEVICE); + dmaaddr = ssb_dma_map_single(ring->dev->dev, + buf, len, DMA_TO_DEVICE); } else { - dmaaddr = dma_map_single(ring->dev->dev->dma_dev, - buf, len, DMA_FROM_DEVICE); + dmaaddr = ssb_dma_map_single(ring->dev->dev, + buf, len, DMA_FROM_DEVICE); } return dmaaddr; @@ -343,11 +343,11 @@ static inline dma_addr_t addr, size_t len, int tx) { if (tx) { - dma_unmap_single(ring->dev->dev->dma_dev, - addr, len, DMA_TO_DEVICE); + ssb_dma_unmap_single(ring->dev->dev, + addr, len, DMA_TO_DEVICE); } else { - dma_unmap_single(ring->dev->dev->dma_dev, - addr, len, DMA_FROM_DEVICE); + ssb_dma_unmap_single(ring->dev->dev, + addr, len, DMA_FROM_DEVICE); } } @@ -356,8 +356,8 @@ static inline dma_addr_t addr, size_t len) { B43_WARN_ON(ring->tx); - dma_sync_single_for_cpu(ring->dev->dev->dma_dev, - addr, len, DMA_FROM_DEVICE); + ssb_dma_sync_single_for_cpu(ring->dev->dev, + addr, len, DMA_FROM_DEVICE); } static inline @@ -365,8 +365,8 @@ static inline dma_addr_t addr, size_t len) { B43_WARN_ON(ring->tx); - dma_sync_single_for_device(ring->dev->dev->dma_dev, - addr, len, DMA_FROM_DEVICE); + ssb_dma_sync_single_for_device(ring->dev->dev, + addr, len, DMA_FROM_DEVICE); } static inline @@ -381,7 +381,6 @@ static inline static int alloc_ringmemory(struct b43_dmaring *ring) { - struct device *dma_dev = ring->dev->dev->dma_dev; gfp_t flags = GFP_KERNEL; /* The specs call for 4K buffers for 30- and 32-bit DMA with 4K @@ -392,11 +391,14 @@ static int alloc_ringmemory(struct b43_dmaring *ring) * For unknown reasons - possibly a hardware error - the BCM4311 rev * 02, which uses 64-bit DMA, needs the ring buffer in very low memory, * which accounts for the GFP_DMA flag below. + * + * The flags here must match the flags in free_ringmemory below! */ if (ring->type == B43_DMA_64BIT) flags |= GFP_DMA; - ring->descbase = dma_alloc_coherent(dma_dev, B43_DMA_RINGMEMSIZE, - &(ring->dmabase), flags); + ring->descbase = ssb_dma_alloc_consistent(ring->dev->dev, + B43_DMA_RINGMEMSIZE, + &(ring->dmabase), flags); if (!ring->descbase) { b43err(ring->dev->wl, "DMA ringmemory allocation failed\n"); return -ENOMEM; @@ -408,10 +410,13 @@ static int alloc_ringmemory(struct b43_dmaring *ring) static void free_ringmemory(struct b43_dmaring *ring) { - struct device *dma_dev = ring->dev->dev->dma_dev; + gfp_t flags = GFP_KERNEL; + + if (ring->type == B43_DMA_64BIT) + flags |= GFP_DMA; - dma_free_coherent(dma_dev, B43_DMA_RINGMEMSIZE, - ring->descbase, ring->dmabase); + ssb_dma_free_consistent(ring->dev->dev, B43_DMA_RINGMEMSIZE, + ring->descbase, ring->dmabase, flags); } /* Reset the RX DMA channel */ @@ -518,7 +523,7 @@ static bool b43_dma_mapping_error(struct b43_dmaring *ring, dma_addr_t addr, size_t buffersize, bool dma_to_device) { - if (unlikely(dma_mapping_error(addr))) + if (unlikely(ssb_dma_mapping_error(ring->dev->dev, addr))) return 1; switch (ring->type) { @@ -844,10 +849,10 @@ struct b43_dmaring *b43_setup_dmaring(struct b43_wldev *dev, goto err_kfree_meta; /* test for ability to dma to txhdr_cache */ - dma_test = dma_map_single(dev->dev->dma_dev, - ring->txhdr_cache, - b43_txhdr_size(dev), - DMA_TO_DEVICE); + dma_test = ssb_dma_map_single(dev->dev, + ring->txhdr_cache, + b43_txhdr_size(dev), + DMA_TO_DEVICE); if (b43_dma_mapping_error(ring, dma_test, b43_txhdr_size(dev), 1)) { @@ -859,10 +864,10 @@ struct b43_dmaring *b43_setup_dmaring(struct b43_wldev *dev, if (!ring->txhdr_cache) goto err_kfree_meta; - dma_test = dma_map_single(dev->dev->dma_dev, - ring->txhdr_cache, - b43_txhdr_size(dev), - DMA_TO_DEVICE); + dma_test = ssb_dma_map_single(dev->dev, + ring->txhdr_cache, + b43_txhdr_size(dev), + DMA_TO_DEVICE); if (b43_dma_mapping_error(ring, dma_test, b43_txhdr_size(dev), 1)) { @@ -873,9 +878,9 @@ struct b43_dmaring *b43_setup_dmaring(struct b43_wldev *dev, } } - dma_unmap_single(dev->dev->dma_dev, - dma_test, b43_txhdr_size(dev), - DMA_TO_DEVICE); + ssb_dma_unmap_single(dev->dev, + dma_test, b43_txhdr_size(dev), + DMA_TO_DEVICE); } err = alloc_ringmemory(ring); diff --git a/drivers/net/wireless/b43legacy/dma.c b/drivers/net/wireless/b43legacy/dma.c index 33cc256c5ba..9736b2f56a7 100644 --- a/drivers/net/wireless/b43legacy/dma.c +++ b/drivers/net/wireless/b43legacy/dma.c @@ -393,13 +393,13 @@ dma_addr_t map_descbuffer(struct b43legacy_dmaring *ring, dma_addr_t dmaaddr; if (tx) - dmaaddr = dma_map_single(ring->dev->dev->dma_dev, - buf, len, - DMA_TO_DEVICE); + dmaaddr = ssb_dma_map_single(ring->dev->dev, + buf, len, + DMA_TO_DEVICE); else - dmaaddr = dma_map_single(ring->dev->dev->dma_dev, - buf, len, - DMA_FROM_DEVICE); + dmaaddr = ssb_dma_map_single(ring->dev->dev, + buf, len, + DMA_FROM_DEVICE); return dmaaddr; } @@ -411,13 +411,13 @@ void unmap_descbuffer(struct b43legacy_dmaring *ring, int tx) { if (tx) - dma_unmap_single(ring->dev->dev->dma_dev, - addr, len, - DMA_TO_DEVICE); + ssb_dma_unmap_single(ring->dev->dev, + addr, len, + DMA_TO_DEVICE); else - dma_unmap_single(ring->dev->dev->dma_dev, - addr, len, - DMA_FROM_DEVICE); + ssb_dma_unmap_single(ring->dev->dev, + addr, len, + DMA_FROM_DEVICE); } static inline @@ -427,8 +427,8 @@ void sync_descbuffer_for_cpu(struct b43legacy_dmaring *ring, { B43legacy_WARN_ON(ring->tx); - dma_sync_single_for_cpu(ring->dev->dev->dma_dev, - addr, len, DMA_FROM_DEVICE); + ssb_dma_sync_single_for_cpu(ring->dev->dev, + addr, len, DMA_FROM_DEVICE); } static inline @@ -438,8 +438,8 @@ void sync_descbuffer_for_device(struct b43legacy_dmaring *ring, { B43legacy_WARN_ON(ring->tx); - dma_sync_single_for_device(ring->dev->dev->dma_dev, - addr, len, DMA_FROM_DEVICE); + ssb_dma_sync_single_for_device(ring->dev->dev, + addr, len, DMA_FROM_DEVICE); } static inline @@ -458,10 +458,11 @@ void free_descriptor_buffer(struct b43legacy_dmaring *ring, static int alloc_ringmemory(struct b43legacy_dmaring *ring) { - struct device *dma_dev = ring->dev->dev->dma_dev; - - ring->descbase = dma_alloc_coherent(dma_dev, B43legacy_DMA_RINGMEMSIZE, - &(ring->dmabase), GFP_KERNEL); + /* GFP flags must match the flags in free_ringmemory()! */ + ring->descbase = ssb_dma_alloc_consistent(ring->dev->dev, + B43legacy_DMA_RINGMEMSIZE, + &(ring->dmabase), + GFP_KERNEL); if (!ring->descbase) { b43legacyerr(ring->dev->wl, "DMA ringmemory allocation" " failed\n"); @@ -474,10 +475,8 @@ static int alloc_ringmemory(struct b43legacy_dmaring *ring) static void free_ringmemory(struct b43legacy_dmaring *ring) { - struct device *dma_dev = ring->dev->dev->dma_dev; - - dma_free_coherent(dma_dev, B43legacy_DMA_RINGMEMSIZE, - ring->descbase, ring->dmabase); + ssb_dma_free_consistent(ring->dev->dev, B43legacy_DMA_RINGMEMSIZE, + ring->descbase, ring->dmabase, GFP_KERNEL); } /* Reset the RX DMA channel */ @@ -589,7 +588,7 @@ static bool b43legacy_dma_mapping_error(struct b43legacy_dmaring *ring, size_t buffersize, bool dma_to_device) { - if (unlikely(dma_mapping_error(addr))) + if (unlikely(ssb_dma_mapping_error(ring->dev->dev, addr))) return 1; switch (ring->type) { @@ -893,9 +892,9 @@ struct b43legacy_dmaring *b43legacy_setup_dmaring(struct b43legacy_wldev *dev, goto err_kfree_meta; /* test for ability to dma to txhdr_cache */ - dma_test = dma_map_single(dev->dev->dma_dev, ring->txhdr_cache, - sizeof(struct b43legacy_txhdr_fw3), - DMA_TO_DEVICE); + dma_test = ssb_dma_map_single(dev->dev, ring->txhdr_cache, + sizeof(struct b43legacy_txhdr_fw3), + DMA_TO_DEVICE); if (b43legacy_dma_mapping_error(ring, dma_test, sizeof(struct b43legacy_txhdr_fw3), 1)) { @@ -907,7 +906,7 @@ struct b43legacy_dmaring *b43legacy_setup_dmaring(struct b43legacy_wldev *dev, if (!ring->txhdr_cache) goto err_kfree_meta; - dma_test = dma_map_single(dev->dev->dma_dev, + dma_test = ssb_dma_map_single(dev->dev, ring->txhdr_cache, sizeof(struct b43legacy_txhdr_fw3), DMA_TO_DEVICE); @@ -917,9 +916,9 @@ struct b43legacy_dmaring *b43legacy_setup_dmaring(struct b43legacy_wldev *dev, goto err_kfree_txhdr_cache; } - dma_unmap_single(dev->dev->dma_dev, - dma_test, sizeof(struct b43legacy_txhdr_fw3), - DMA_TO_DEVICE); + ssb_dma_unmap_single(dev->dev, dma_test, + sizeof(struct b43legacy_txhdr_fw3), + DMA_TO_DEVICE); } ring->dev = dev; diff --git a/drivers/ssb/Kconfig b/drivers/ssb/Kconfig index cd845b8acd1..307b1f62d94 100644 --- a/drivers/ssb/Kconfig +++ b/drivers/ssb/Kconfig @@ -2,7 +2,7 @@ menu "Sonics Silicon Backplane" config SSB_POSSIBLE bool - depends on HAS_IOMEM + depends on HAS_IOMEM && HAS_DMA default y config SSB diff --git a/drivers/ssb/main.c b/drivers/ssb/main.c index d184f2aea78..d831a2beff3 100644 --- a/drivers/ssb/main.c +++ b/drivers/ssb/main.c @@ -462,18 +462,15 @@ static int ssb_devices_register(struct ssb_bus *bus) #ifdef CONFIG_SSB_PCIHOST sdev->irq = bus->host_pci->irq; dev->parent = &bus->host_pci->dev; - sdev->dma_dev = &bus->host_pci->dev; #endif break; case SSB_BUSTYPE_PCMCIA: #ifdef CONFIG_SSB_PCMCIAHOST sdev->irq = bus->host_pcmcia->irq.AssignedIRQ; dev->parent = &bus->host_pcmcia->dev; - sdev->dma_dev = &bus->host_pcmcia->dev; #endif break; case SSB_BUSTYPE_SSB: - sdev->dma_dev = dev; break; } @@ -1156,36 +1153,82 @@ u32 ssb_dma_translation(struct ssb_device *dev) { switch (dev->bus->bustype) { case SSB_BUSTYPE_SSB: - case SSB_BUSTYPE_PCMCIA: return 0; case SSB_BUSTYPE_PCI: return SSB_PCI_DMA; + default: + __ssb_dma_not_implemented(dev); } return 0; } EXPORT_SYMBOL(ssb_dma_translation); -int ssb_dma_set_mask(struct ssb_device *ssb_dev, u64 mask) +int ssb_dma_set_mask(struct ssb_device *dev, u64 mask) { - struct device *dma_dev = ssb_dev->dma_dev; - int err = 0; + int err; -#ifdef CONFIG_SSB_PCIHOST - if (ssb_dev->bus->bustype == SSB_BUSTYPE_PCI) { - err = pci_set_dma_mask(ssb_dev->bus->host_pci, mask); + switch (dev->bus->bustype) { + case SSB_BUSTYPE_PCI: + err = pci_set_dma_mask(dev->bus->host_pci, mask); if (err) return err; - err = pci_set_consistent_dma_mask(ssb_dev->bus->host_pci, mask); + err = pci_set_consistent_dma_mask(dev->bus->host_pci, mask); return err; + case SSB_BUSTYPE_SSB: + return dma_set_mask(dev->dev, mask); + default: + __ssb_dma_not_implemented(dev); } -#endif - dma_dev->coherent_dma_mask = mask; - dma_dev->dma_mask = &dma_dev->coherent_dma_mask; - - return err; + return -ENOSYS; } EXPORT_SYMBOL(ssb_dma_set_mask); +void * ssb_dma_alloc_consistent(struct ssb_device *dev, size_t size, + dma_addr_t *dma_handle, gfp_t gfp_flags) +{ + switch (dev->bus->bustype) { + case SSB_BUSTYPE_PCI: + if (gfp_flags & GFP_DMA) { + /* Workaround: The PCI API does not support passing + * a GFP flag. */ + return dma_alloc_coherent(&dev->bus->host_pci->dev, + size, dma_handle, gfp_flags); + } + return pci_alloc_consistent(dev->bus->host_pci, size, dma_handle); + case SSB_BUSTYPE_SSB: + return dma_alloc_coherent(dev->dev, size, dma_handle, gfp_flags); + default: + __ssb_dma_not_implemented(dev); + } + return NULL; +} +EXPORT_SYMBOL(ssb_dma_alloc_consistent); + +void ssb_dma_free_consistent(struct ssb_device *dev, size_t size, + void *vaddr, dma_addr_t dma_handle, + gfp_t gfp_flags) +{ + switch (dev->bus->bustype) { + case SSB_BUSTYPE_PCI: + if (gfp_flags & GFP_DMA) { + /* Workaround: The PCI API does not support passing + * a GFP flag. */ + dma_free_coherent(&dev->bus->host_pci->dev, + size, vaddr, dma_handle); + return; + } + pci_free_consistent(dev->bus->host_pci, size, + vaddr, dma_handle); + return; + case SSB_BUSTYPE_SSB: + dma_free_coherent(dev->dev, size, vaddr, dma_handle); + return; + default: + __ssb_dma_not_implemented(dev); + } +} +EXPORT_SYMBOL(ssb_dma_free_consistent); + int ssb_bus_may_powerdown(struct ssb_bus *bus) { struct ssb_chipcommon *cc; diff --git a/include/linux/ssb/ssb.h b/include/linux/ssb/ssb.h index 50dfd0dc409..0fe5a0ded3e 100644 --- a/include/linux/ssb/ssb.h +++ b/include/linux/ssb/ssb.h @@ -137,9 +137,6 @@ struct ssb_device { const struct ssb_bus_ops *ops; struct device *dev; - /* Pointer to the device that has to be used for - * any DMA related operation. */ - struct device *dma_dev; struct ssb_bus *bus; struct ssb_device_id id; @@ -399,13 +396,151 @@ static inline void ssb_block_write(struct ssb_device *dev, const void *buffer, #endif /* CONFIG_SSB_BLOCKIO */ +/* The SSB DMA API. Use this API for any DMA operation on the device. + * This API basically is a wrapper that calls the correct DMA API for + * the host device type the SSB device is attached to. */ + /* Translation (routing) bits that need to be ORed to DMA * addresses before they are given to a device. */ extern u32 ssb_dma_translation(struct ssb_device *dev); #define SSB_DMA_TRANSLATION_MASK 0xC0000000 #define SSB_DMA_TRANSLATION_SHIFT 30 -extern int ssb_dma_set_mask(struct ssb_device *ssb_dev, u64 mask); +extern int ssb_dma_set_mask(struct ssb_device *dev, u64 mask); + +extern void * ssb_dma_alloc_consistent(struct ssb_device *dev, size_t size, + dma_addr_t *dma_handle, gfp_t gfp_flags); +extern void ssb_dma_free_consistent(struct ssb_device *dev, size_t size, + void *vaddr, dma_addr_t dma_handle, + gfp_t gfp_flags); + +static inline void __cold __ssb_dma_not_implemented(struct ssb_device *dev) +{ +#ifdef CONFIG_SSB_DEBUG + printk(KERN_ERR "SSB: BUG! Calling DMA API for " + "unsupported bustype %d\n", dev->bus->bustype); +#endif /* DEBUG */ +} + +static inline int ssb_dma_mapping_error(struct ssb_device *dev, dma_addr_t addr) +{ + switch (dev->bus->bustype) { + case SSB_BUSTYPE_PCI: + return pci_dma_mapping_error(addr); + case SSB_BUSTYPE_SSB: + return dma_mapping_error(addr); + default: + __ssb_dma_not_implemented(dev); + } + return -ENOSYS; +} + +static inline dma_addr_t ssb_dma_map_single(struct ssb_device *dev, void *p, + size_t size, enum dma_data_direction dir) +{ + switch (dev->bus->bustype) { + case SSB_BUSTYPE_PCI: + return pci_map_single(dev->bus->host_pci, p, size, dir); + case SSB_BUSTYPE_SSB: + return dma_map_single(dev->dev, p, size, dir); + default: + __ssb_dma_not_implemented(dev); + } + return 0; +} + +static inline void ssb_dma_unmap_single(struct ssb_device *dev, dma_addr_t dma_addr, + size_t size, enum dma_data_direction dir) +{ + switch (dev->bus->bustype) { + case SSB_BUSTYPE_PCI: + pci_unmap_single(dev->bus->host_pci, dma_addr, size, dir); + return; + case SSB_BUSTYPE_SSB: + dma_unmap_single(dev->dev, dma_addr, size, dir); + return; + default: + __ssb_dma_not_implemented(dev); + } +} + +static inline void ssb_dma_sync_single_for_cpu(struct ssb_device *dev, + dma_addr_t dma_addr, + size_t size, + enum dma_data_direction dir) +{ + switch (dev->bus->bustype) { + case SSB_BUSTYPE_PCI: + pci_dma_sync_single_for_cpu(dev->bus->host_pci, dma_addr, + size, dir); + return; + case SSB_BUSTYPE_SSB: + dma_sync_single_for_cpu(dev->dev, dma_addr, size, dir); + return; + default: + __ssb_dma_not_implemented(dev); + } +} + +static inline void ssb_dma_sync_single_for_device(struct ssb_device *dev, + dma_addr_t dma_addr, + size_t size, + enum dma_data_direction dir) +{ + switch (dev->bus->bustype) { + case SSB_BUSTYPE_PCI: + pci_dma_sync_single_for_device(dev->bus->host_pci, dma_addr, + size, dir); + return; + case SSB_BUSTYPE_SSB: + dma_sync_single_for_device(dev->dev, dma_addr, size, dir); + return; + default: + __ssb_dma_not_implemented(dev); + } +} + +static inline void ssb_dma_sync_single_range_for_cpu(struct ssb_device *dev, + dma_addr_t dma_addr, + unsigned long offset, + size_t size, + enum dma_data_direction dir) +{ + switch (dev->bus->bustype) { + case SSB_BUSTYPE_PCI: + /* Just sync everything. That's all the PCI API can do. */ + pci_dma_sync_single_for_cpu(dev->bus->host_pci, dma_addr, + offset + size, dir); + return; + case SSB_BUSTYPE_SSB: + dma_sync_single_range_for_cpu(dev->dev, dma_addr, offset, + size, dir); + return; + default: + __ssb_dma_not_implemented(dev); + } +} + +static inline void ssb_dma_sync_single_range_for_device(struct ssb_device *dev, + dma_addr_t dma_addr, + unsigned long offset, + size_t size, + enum dma_data_direction dir) +{ + switch (dev->bus->bustype) { + case SSB_BUSTYPE_PCI: + /* Just sync everything. That's all the PCI API can do. */ + pci_dma_sync_single_for_device(dev->bus->host_pci, dma_addr, + offset + size, dir); + return; + case SSB_BUSTYPE_SSB: + dma_sync_single_range_for_device(dev->dev, dma_addr, offset, + size, dir); + return; + default: + __ssb_dma_not_implemented(dev); + } +} #ifdef CONFIG_SSB_PCIHOST -- cgit v1.2.3 From 9b839a7453dc7a25dbd367486017648182df541f Mon Sep 17 00:00:00 2001 From: Michael Buesch Date: Fri, 20 Jun 2008 17:44:02 +0200 Subject: b43: Add simple firmware watchdog This adds a simple firmware watchdog for the opensource firmware. This will check every 15 seconds, if the firmware zeroed out the watchdog register. The firmware will do this in its eventloop. Signed-off-by: Michael Buesch Signed-off-by: John W. Linville --- drivers/net/wireless/b43/b43.h | 2 ++ drivers/net/wireless/b43/main.c | 15 +++++++++++++++ 2 files changed, 17 insertions(+) (limited to 'drivers/net/wireless') diff --git a/drivers/net/wireless/b43/b43.h b/drivers/net/wireless/b43/b43.h index 532365f5ece..edcdfa36645 100644 --- a/drivers/net/wireless/b43/b43.h +++ b/drivers/net/wireless/b43/b43.h @@ -441,6 +441,8 @@ enum { #define B43_FWPANIC_DIE 0 /* Firmware died. Don't auto-restart it. */ #define B43_FWPANIC_RESTART 1 /* Firmware died. Schedule a controller reset. */ +/* The firmware register that contains the watchdog counter. */ +#define B43_WATCHDOG_REG 1 /* Device specific rate values. * The actual values defined here are (rate_in_mbps * 2). diff --git a/drivers/net/wireless/b43/main.c b/drivers/net/wireless/b43/main.c index 69272b9bdb6..c14d522d69e 100644 --- a/drivers/net/wireless/b43/main.c +++ b/drivers/net/wireless/b43/main.c @@ -2807,6 +2807,21 @@ static void b43_periodic_every30sec(struct b43_wldev *dev) static void b43_periodic_every15sec(struct b43_wldev *dev) { struct b43_phy *phy = &dev->phy; + u16 wdr; + + if (dev->fw.opensource) { + /* Check if the firmware is still alive. + * It will reset the watchdog counter to 0 in its idle loop. */ + wdr = b43_shm_read16(dev, B43_SHM_SCRATCH, B43_WATCHDOG_REG); + if (unlikely(wdr)) { + b43err(dev->wl, "Firmware watchdog: The firmware died!\n"); + b43_controller_restart(dev, "Firmware watchdog"); + return; + } else { + b43_shm_write16(dev, B43_SHM_SCRATCH, + B43_WATCHDOG_REG, 1); + } + } if (phy->type == B43_PHYTYPE_G) { //TODO: update_aci_moving_average -- cgit v1.2.3 From 923fd7036ff04381b265037469c79a2e7d0d6b67 Mon Sep 17 00:00:00 2001 From: Michael Buesch Date: Fri, 20 Jun 2008 18:02:08 +0200 Subject: b43: Add debugfs firmware debugging knob This adds a firmware debugging knob to debugfs. With this knob it's possible to enable advanced runtime firmware checks. For now it only implements one sanity check for the mac-suspend. In future there'll probably be more. If CONFIG_B43_DEBUG is disabled, these checks will collapse to nothing. Signed-off-by: Michael Buesch Signed-off-by: John W. Linville --- drivers/net/wireless/b43/debugfs.c | 1 + drivers/net/wireless/b43/debugfs.h | 1 + drivers/net/wireless/b43/main.c | 13 +++++++++++++ 3 files changed, 15 insertions(+) (limited to 'drivers/net/wireless') diff --git a/drivers/net/wireless/b43/debugfs.c b/drivers/net/wireless/b43/debugfs.c index 24854c3e89c..29851bc1101 100644 --- a/drivers/net/wireless/b43/debugfs.c +++ b/drivers/net/wireless/b43/debugfs.c @@ -801,6 +801,7 @@ static void b43_add_dynamic_debug(struct b43_wldev *dev) add_dyn_dbg("debug_pwork_fast", B43_DBG_PWORK_FAST, 0); add_dyn_dbg("debug_pwork_stop", B43_DBG_PWORK_STOP, 0); add_dyn_dbg("debug_lo", B43_DBG_LO, 0); + add_dyn_dbg("debug_firmware", B43_DBG_FIRMWARE, 0); #undef add_dyn_dbg } diff --git a/drivers/net/wireless/b43/debugfs.h b/drivers/net/wireless/b43/debugfs.h index 132c81f2f98..22ffd02ba55 100644 --- a/drivers/net/wireless/b43/debugfs.h +++ b/drivers/net/wireless/b43/debugfs.h @@ -11,6 +11,7 @@ enum b43_dyndbg { /* Dynamic debugging features */ B43_DBG_PWORK_FAST, B43_DBG_PWORK_STOP, B43_DBG_LO, + B43_DBG_FIRMWARE, __B43_NR_DYNDBG, }; diff --git a/drivers/net/wireless/b43/main.c b/drivers/net/wireless/b43/main.c index c14d522d69e..82cca19137f 100644 --- a/drivers/net/wireless/b43/main.c +++ b/drivers/net/wireless/b43/main.c @@ -2487,6 +2487,19 @@ static void b43_gpio_cleanup(struct b43_wldev *dev) /* http://bcm-specs.sipsolutions.net/EnableMac */ void b43_mac_enable(struct b43_wldev *dev) { + if (b43_debug(dev, B43_DBG_FIRMWARE)) { + u16 fwstate; + + fwstate = b43_shm_read16(dev, B43_SHM_SHARED, + B43_SHM_SH_UCODESTAT); + if ((fwstate != B43_SHM_SH_UCODESTAT_SUSP) && + (fwstate != B43_SHM_SH_UCODESTAT_SLEEP)) { + b43err(dev->wl, "b43_mac_enable(): The firmware " + "should be suspended, but current state is %u\n", + fwstate); + } + } + dev->mac_suspended--; B43_WARN_ON(dev->mac_suspended < 0); if (dev->mac_suspended == 0) { -- cgit v1.2.3 From 61243d8e79de67d703b192fae2c4ab80fc0fac34 Mon Sep 17 00:00:00 2001 From: Ivo van Doorn Date: Fri, 20 Jun 2008 22:10:53 +0200 Subject: rt2x00: Remove duplicate deinitialization When rt2x00queue_alloc_rxskbs() fails rt2x00queue_unitialize() will be called which will free all rxskb. So we don't need to do this in the rt2x00queue_alloc_rxskb() function as well. rt2x00queue_free_skb() unmaps the DMA but doesn't clear the allocation flag. Since the code is copied from rt2x00queue_unmap_skb() anyway (and that function does clear the flag) we might as well use that function directly. Signed-off-by: Ivo van Doorn Signed-off-by: John W. Linville --- drivers/net/wireless/rt2x00/rt2x00queue.c | 20 ++------------------ 1 file changed, 2 insertions(+), 18 deletions(-) (limited to 'drivers/net/wireless') diff --git a/drivers/net/wireless/rt2x00/rt2x00queue.c b/drivers/net/wireless/rt2x00/rt2x00queue.c index 49d3bb84ab6..8e86611791f 100644 --- a/drivers/net/wireless/rt2x00/rt2x00queue.c +++ b/drivers/net/wireless/rt2x00/rt2x00queue.c @@ -107,18 +107,7 @@ void rt2x00queue_unmap_skb(struct rt2x00_dev *rt2x00dev, struct sk_buff *skb) void rt2x00queue_free_skb(struct rt2x00_dev *rt2x00dev, struct sk_buff *skb) { - struct skb_frame_desc *skbdesc = get_skb_frame_desc(skb); - - if (skbdesc->flags & SKBDESC_DMA_MAPPED_RX) { - dma_unmap_single(rt2x00dev->dev, skbdesc->skb_dma, skb->len, - DMA_FROM_DEVICE); - } - - if (skbdesc->flags & SKBDESC_DMA_MAPPED_TX) { - dma_unmap_single(rt2x00dev->dev, skbdesc->skb_dma, skb->len, - DMA_TO_DEVICE); - } - + rt2x00queue_unmap_skb(rt2x00dev, skb); dev_kfree_skb_any(skb); } @@ -509,16 +498,11 @@ static int rt2x00queue_alloc_rxskbs(struct rt2x00_dev *rt2x00dev, for (i = 0; i < queue->limit; i++) { skb = rt2x00queue_alloc_rxskb(rt2x00dev, &queue->entries[i]); if (!skb) - goto exit; + return -ENOMEM; queue->entries[i].skb = skb; } return 0; - -exit: - rt2x00queue_free_skbs(rt2x00dev, queue); - - return -ENOMEM; } int rt2x00queue_initialize(struct rt2x00_dev *rt2x00dev) -- cgit v1.2.3 From 3a078876caee9634dbb9b41e6269262e30e8b535 Mon Sep 17 00:00:00 2001 From: Bob Copeland Date: Wed, 25 Jun 2008 22:35:28 -0400 Subject: ath5k: convert LED code to use mac80211 triggers This change cleans up the ath5k LED code and converts it to use the standard LED device class along with the rx/tx LED triggers provided by mac80211. Signed-off-by: Bob Copeland Signed-off-by: John W. Linville --- drivers/net/wireless/ath5k/Kconfig | 3 + drivers/net/wireless/ath5k/base.c | 251 ++++++++++++++++--------------------- drivers/net/wireless/ath5k/base.h | 32 ++--- 3 files changed, 132 insertions(+), 154 deletions(-) (limited to 'drivers/net/wireless') diff --git a/drivers/net/wireless/ath5k/Kconfig b/drivers/net/wireless/ath5k/Kconfig index f1f2aea2eab..75383a5df99 100644 --- a/drivers/net/wireless/ath5k/Kconfig +++ b/drivers/net/wireless/ath5k/Kconfig @@ -1,6 +1,9 @@ config ATH5K tristate "Atheros 5xxx wireless cards support" depends on PCI && MAC80211 && WLAN_80211 && EXPERIMENTAL + select MAC80211_LEDS + select LEDS_CLASS + select NEW_LEDS ---help--- This module adds support for wireless adapters based on Atheros 5xxx chipset. diff --git a/drivers/net/wireless/ath5k/base.c b/drivers/net/wireless/ath5k/base.c index 010c6655595..a80a3a4744a 100644 --- a/drivers/net/wireless/ath5k/base.c +++ b/drivers/net/wireless/ath5k/base.c @@ -58,11 +58,6 @@ #include "reg.h" #include "debug.h" -enum { - ATH_LED_TX, - ATH_LED_RX, -}; - static int ath5k_calinterval = 10; /* Calibrate PHY every 10 secs (TODO: Fixme) */ @@ -309,13 +304,10 @@ static void ath5k_tasklet_reset(unsigned long data); static void ath5k_calibrate(unsigned long data); /* LED functions */ -static void ath5k_led_off(unsigned long data); -static void ath5k_led_blink(struct ath5k_softc *sc, - unsigned int on, - unsigned int off); -static void ath5k_led_event(struct ath5k_softc *sc, - int event); - +static int ath5k_init_leds(struct ath5k_softc *sc); +static void ath5k_led_enable(struct ath5k_softc *sc); +static void ath5k_led_off(struct ath5k_softc *sc); +static void ath5k_unregister_leds(struct ath5k_softc *sc); /* * Module init/exit functions @@ -596,8 +588,7 @@ ath5k_pci_suspend(struct pci_dev *pdev, pm_message_t state) struct ieee80211_hw *hw = pci_get_drvdata(pdev); struct ath5k_softc *sc = hw->priv; - if (test_bit(ATH_STAT_LEDSOFT, sc->status)) - ath5k_hw_set_gpio(sc->ah, sc->led_pin, 1); + ath5k_led_off(sc); ath5k_stop_hw(sc); pci_save_state(pdev); @@ -632,10 +623,7 @@ ath5k_pci_resume(struct pci_dev *pdev) pci_write_config_byte(pdev, 0x41, 0); ath5k_init(sc); - if (test_bit(ATH_STAT_LEDSOFT, sc->status)) { - ath5k_hw_set_gpio_output(ah, sc->led_pin); - ath5k_hw_set_gpio(ah, sc->led_pin, 0); - } + ath5k_led_enable(sc); /* * Reset the key cache since some parts do not @@ -742,27 +730,6 @@ ath5k_attach(struct pci_dev *pdev, struct ieee80211_hw *hw) tasklet_init(&sc->txtq, ath5k_tasklet_tx, (unsigned long)sc); tasklet_init(&sc->restq, ath5k_tasklet_reset, (unsigned long)sc); setup_timer(&sc->calib_tim, ath5k_calibrate, (unsigned long)sc); - setup_timer(&sc->led_tim, ath5k_led_off, (unsigned long)sc); - - sc->led_on = 0; /* low true */ - /* - * Auto-enable soft led processing for IBM cards and for - * 5211 minipci cards. - */ - if (pdev->device == PCI_DEVICE_ID_ATHEROS_AR5212_IBM || - pdev->device == PCI_DEVICE_ID_ATHEROS_AR5211) { - __set_bit(ATH_STAT_LEDSOFT, sc->status); - sc->led_pin = 0; - } - /* Enable softled on PIN1 on HP Compaq nc6xx, nc4000 & nx5000 laptops */ - if (pdev->subsystem_vendor == PCI_VENDOR_ID_COMPAQ) { - __set_bit(ATH_STAT_LEDSOFT, sc->status); - sc->led_pin = 0; - } - if (test_bit(ATH_STAT_LEDSOFT, sc->status)) { - ath5k_hw_set_gpio_output(ah, sc->led_pin); - ath5k_hw_set_gpio(ah, sc->led_pin, !sc->led_on); - } ath5k_hw_get_lladdr(ah, mac); SET_IEEE80211_PERM_ADDR(hw, mac); @@ -776,6 +743,8 @@ ath5k_attach(struct pci_dev *pdev, struct ieee80211_hw *hw) goto err_queues; } + ath5k_init_leds(sc); + return 0; err_queues: ath5k_txq_release(sc); @@ -809,6 +778,7 @@ ath5k_detach(struct pci_dev *pdev, struct ieee80211_hw *hw) ath5k_desc_free(sc, pdev); ath5k_txq_release(sc); ath5k_hw_release_tx_queue(sc->ah, sc->bhalq); + ath5k_unregister_leds(sc); /* * NB: can't reclaim these until after ieee80211_ifdetach @@ -1060,65 +1030,9 @@ ath5k_chan_set(struct ath5k_softc *sc, struct ieee80211_channel *chan) return 0; } -/* - * TODO: CLEAN THIS !!! - */ static void ath5k_setcurmode(struct ath5k_softc *sc, unsigned int mode) { - if (unlikely(test_bit(ATH_STAT_LEDSOFT, sc->status))) { - /* from Atheros NDIS driver, w/ permission */ - static const struct { - u16 rate; /* tx/rx 802.11 rate */ - u16 timeOn; /* LED on time (ms) */ - u16 timeOff; /* LED off time (ms) */ - } blinkrates[] = { - { 108, 40, 10 }, - { 96, 44, 11 }, - { 72, 50, 13 }, - { 48, 57, 14 }, - { 36, 67, 16 }, - { 24, 80, 20 }, - { 22, 100, 25 }, - { 18, 133, 34 }, - { 12, 160, 40 }, - { 10, 200, 50 }, - { 6, 240, 58 }, - { 4, 267, 66 }, - { 2, 400, 100 }, - { 0, 500, 130 } - }; - const struct ath5k_rate_table *rt = - ath5k_hw_get_rate_table(sc->ah, mode); - unsigned int i, j; - - BUG_ON(rt == NULL); - - memset(sc->hwmap, 0, sizeof(sc->hwmap)); - for (i = 0; i < 32; i++) { - u8 ix = rt->rate_code_to_index[i]; - if (ix == 0xff) { - sc->hwmap[i].ledon = msecs_to_jiffies(500); - sc->hwmap[i].ledoff = msecs_to_jiffies(130); - continue; - } - sc->hwmap[i].txflags = IEEE80211_RADIOTAP_F_DATAPAD; - /* receive frames include FCS */ - sc->hwmap[i].rxflags = sc->hwmap[i].txflags | - IEEE80211_RADIOTAP_F_FCS; - /* setup blink rate table to avoid per-packet lookup */ - for (j = 0; j < ARRAY_SIZE(blinkrates) - 1; j++) - if (blinkrates[j].rate == /* XXX why 7f? */ - (rt->rates[ix].dot11_rate&0x7f)) - break; - - sc->hwmap[i].ledon = msecs_to_jiffies(blinkrates[j]. - timeOn); - sc->hwmap[i].ledoff = msecs_to_jiffies(blinkrates[j]. - timeOff); - } - } - sc->curmode = mode; if (mode == AR5K_MODE_11A) { @@ -1900,8 +1814,6 @@ accept: ath5k_check_ibss_tsf(sc, skb, &rxs); __ieee80211_rx(sc->hw, skb, &rxs); - sc->led_rxrate = rs.rs_rate; - ath5k_led_event(sc, ATH_LED_RX); next: list_move_tail(&bf->list, &sc->rxbuf); } while (ath5k_rxbuf_setup(sc, bf) == 0); @@ -1982,13 +1894,9 @@ ath5k_tasklet_tx(unsigned long data) struct ath5k_softc *sc = (void *)data; ath5k_tx_processq(sc, sc->txq); - - ath5k_led_event(sc, ATH_LED_TX); } - - /*****************\ * Beacon handling * \*****************/ @@ -2363,11 +2271,7 @@ ath5k_stop_locked(struct ath5k_softc *sc) ieee80211_stop_queues(sc->hw); if (!test_bit(ATH_STAT_INVALID, sc->status)) { - if (test_bit(ATH_STAT_LEDSOFT, sc->status)) { - del_timer_sync(&sc->led_tim); - ath5k_hw_set_gpio(ah, sc->led_pin, !sc->led_on); - __clear_bit(ATH_STAT_LEDBLINKING, sc->status); - } + ath5k_led_off(sc); ath5k_hw_set_intr(ah, 0); } ath5k_txq_cleanup(sc); @@ -2563,54 +2467,123 @@ ath5k_calibrate(unsigned long data) \***************/ static void -ath5k_led_off(unsigned long data) +ath5k_led_enable(struct ath5k_softc *sc) { - struct ath5k_softc *sc = (void *)data; - - if (test_bit(ATH_STAT_LEDENDBLINK, sc->status)) - __clear_bit(ATH_STAT_LEDBLINKING, sc->status); - else { - __set_bit(ATH_STAT_LEDENDBLINK, sc->status); - ath5k_hw_set_gpio(sc->ah, sc->led_pin, !sc->led_on); - mod_timer(&sc->led_tim, jiffies + sc->led_off); + if (test_bit(ATH_STAT_LEDSOFT, sc->status)) { + ath5k_hw_set_gpio_output(sc->ah, sc->led_pin); + ath5k_led_off(sc); } } -/* - * Blink the LED according to the specified on/off times. - */ static void -ath5k_led_blink(struct ath5k_softc *sc, unsigned int on, - unsigned int off) +ath5k_led_on(struct ath5k_softc *sc) { - ATH5K_DBG(sc, ATH5K_DEBUG_LED, "on %u off %u\n", on, off); + if (!test_bit(ATH_STAT_LEDSOFT, sc->status)) + return; ath5k_hw_set_gpio(sc->ah, sc->led_pin, sc->led_on); - __set_bit(ATH_STAT_LEDBLINKING, sc->status); - __clear_bit(ATH_STAT_LEDENDBLINK, sc->status); - sc->led_off = off; - mod_timer(&sc->led_tim, jiffies + on); } static void -ath5k_led_event(struct ath5k_softc *sc, int event) +ath5k_led_off(struct ath5k_softc *sc) { - if (likely(!test_bit(ATH_STAT_LEDSOFT, sc->status))) + if (!test_bit(ATH_STAT_LEDSOFT, sc->status)) return; - if (unlikely(test_bit(ATH_STAT_LEDBLINKING, sc->status))) - return; /* don't interrupt active blink */ - switch (event) { - case ATH_LED_TX: - ath5k_led_blink(sc, sc->hwmap[sc->led_txrate].ledon, - sc->hwmap[sc->led_txrate].ledoff); - break; - case ATH_LED_RX: - ath5k_led_blink(sc, sc->hwmap[sc->led_rxrate].ledon, - sc->hwmap[sc->led_rxrate].ledoff); - break; + ath5k_hw_set_gpio(sc->ah, sc->led_pin, !sc->led_on); +} + +static void +ath5k_led_brightness_set(struct led_classdev *led_dev, + enum led_brightness brightness) +{ + struct ath5k_led *led = container_of(led_dev, struct ath5k_led, + led_dev); + + if (brightness == LED_OFF) + ath5k_led_off(led->sc); + else + ath5k_led_on(led->sc); +} + +static int +ath5k_register_led(struct ath5k_softc *sc, struct ath5k_led *led, + const char *name, char *trigger) +{ + int err; + + led->sc = sc; + strncpy(led->name, name, sizeof(led->name)); + led->led_dev.name = led->name; + led->led_dev.default_trigger = trigger; + led->led_dev.brightness_set = ath5k_led_brightness_set; + + err = led_classdev_register(&sc->pdev->dev, &led->led_dev); + if (err) + { + ATH5K_WARN(sc, "could not register LED %s\n", name); + led->sc = NULL; } + return err; +} + +static void +ath5k_unregister_led(struct ath5k_led *led) +{ + if (!led->sc) + return; + led_classdev_unregister(&led->led_dev); + ath5k_led_off(led->sc); + led->sc = NULL; +} + +static void +ath5k_unregister_leds(struct ath5k_softc *sc) +{ + ath5k_unregister_led(&sc->rx_led); + ath5k_unregister_led(&sc->tx_led); } +static int +ath5k_init_leds(struct ath5k_softc *sc) +{ + int ret = 0; + struct ieee80211_hw *hw = sc->hw; + struct pci_dev *pdev = sc->pdev; + char name[ATH5K_LED_MAX_NAME_LEN + 1]; + + sc->led_on = 0; /* active low */ + + /* + * Auto-enable soft led processing for IBM cards and for + * 5211 minipci cards. + */ + if (pdev->device == PCI_DEVICE_ID_ATHEROS_AR5212_IBM || + pdev->device == PCI_DEVICE_ID_ATHEROS_AR5211) { + __set_bit(ATH_STAT_LEDSOFT, sc->status); + sc->led_pin = 0; + } + /* Enable softled on PIN1 on HP Compaq nc6xx, nc4000 & nx5000 laptops */ + if (pdev->subsystem_vendor == PCI_VENDOR_ID_COMPAQ) { + __set_bit(ATH_STAT_LEDSOFT, sc->status); + sc->led_pin = 1; + } + if (!test_bit(ATH_STAT_LEDSOFT, sc->status)) + goto out; + + ath5k_led_enable(sc); + + snprintf(name, sizeof(name), "ath5k-%s::rx", wiphy_name(hw->wiphy)); + ret = ath5k_register_led(sc, &sc->rx_led, name, + ieee80211_get_rx_led_name(hw)); + if (ret) + goto out; + + snprintf(name, sizeof(name), "ath5k-%s::tx", wiphy_name(hw->wiphy)); + ret = ath5k_register_led(sc, &sc->tx_led, name, + ieee80211_get_tx_led_name(hw)); +out: + return ret; +} /********************\ @@ -2648,8 +2621,6 @@ ath5k_tx(struct ieee80211_hw *hw, struct sk_buff *skb) memmove(skb->data, skb->data+pad, hdrlen); } - sc->led_txrate = ieee80211_get_tx_rate(hw, info)->hw_value; - spin_lock_irqsave(&sc->txbuflock, flags); if (list_empty(&sc->txbuf)) { ATH5K_ERR(sc, "no further txbuf available, dropping packet\n"); diff --git a/drivers/net/wireless/ath5k/base.h b/drivers/net/wireless/ath5k/base.h index bb4b26d523a..47f414b09e6 100644 --- a/drivers/net/wireless/ath5k/base.h +++ b/drivers/net/wireless/ath5k/base.h @@ -45,6 +45,7 @@ #include #include #include +#include #include "ath5k.h" #include "debug.h" @@ -79,6 +80,19 @@ struct ath5k_txq { bool setup; }; +#define ATH5K_LED_MAX_NAME_LEN 31 + +/* + * State for LED triggers + */ +struct ath5k_led +{ + char name[ATH5K_LED_MAX_NAME_LEN + 1]; /* name of the LED in sysfs */ + struct ath5k_softc *sc; /* driver state */ + struct led_classdev led_dev; /* led classdev */ +}; + + #if CHAN_DEBUG #define ATH_CHAN_MAX (26+26+26+200+200) #else @@ -118,13 +132,11 @@ struct ath5k_softc { size_t desc_len; /* size of TX/RX descriptors */ u16 cachelsz; /* cache line size */ - DECLARE_BITMAP(status, 6); + DECLARE_BITMAP(status, 4); #define ATH_STAT_INVALID 0 /* disable hardware accesses */ #define ATH_STAT_MRRETRY 1 /* multi-rate retry support */ #define ATH_STAT_PROMISC 2 -#define ATH_STAT_LEDBLINKING 3 /* LED blink operation active */ -#define ATH_STAT_LEDENDBLINK 4 /* finish LED blink operation */ -#define ATH_STAT_LEDSOFT 5 /* enable LED gpio status */ +#define ATH_STAT_LEDSOFT 3 /* enable LED gpio status */ unsigned int filter_flags; /* HW flags, AR5K_RX_FILTER_* */ unsigned int curmode; /* current phy mode */ @@ -132,13 +144,6 @@ struct ath5k_softc { struct ieee80211_vif *vif; - struct { - u8 rxflags; /* radiotap rx flags */ - u8 txflags; /* radiotap tx flags */ - u16 ledon; /* softled on time */ - u16 ledoff; /* softled off time */ - } hwmap[32]; /* h/w rate ix mappings */ - enum ath5k_int imask; /* interrupt mask copy */ DECLARE_BITMAP(keymap, AR5K_KEYCACHE_SIZE); /* key use bit map */ @@ -148,9 +153,6 @@ struct ath5k_softc { unsigned int led_pin, /* GPIO pin for driving LED */ led_on, /* pin setting for LED on */ led_off; /* off time for current blink */ - struct timer_list led_tim; /* led off timer */ - u8 led_rxrate; /* current rx rate for LED */ - u8 led_txrate; /* current tx rate for LED */ struct tasklet_struct restq; /* reset tasklet */ @@ -159,6 +161,7 @@ struct ath5k_softc { spinlock_t rxbuflock; u32 *rxlink; /* link ptr in last RX desc */ struct tasklet_struct rxtq; /* rx intr tasklet */ + struct ath5k_led rx_led; /* rx led */ struct list_head txbuf; /* transmit buffer */ spinlock_t txbuflock; @@ -167,6 +170,7 @@ struct ath5k_softc { struct ath5k_txq *txq; /* beacon and tx*/ struct tasklet_struct txtq; /* tx intr tasklet */ + struct ath5k_led tx_led; /* tx led */ struct ath5k_buf *bbuf; /* beacon buffer */ unsigned int bhalq, /* SW q for outgoing beacons */ -- cgit v1.2.3 From 40af48ce501ea9ad9c485504a6fa0740801fa051 Mon Sep 17 00:00:00 2001 From: Ivo van Doorn Date: Mon, 23 Jun 2008 19:56:50 +0200 Subject: rt2x00: kill URB for all TX queues during disable_radio() During rt2x00usb_disable_radio() all pending urb's should be killed and not only those from the RX queue. Signed-off-by: Ivo van Doorn Signed-off-by: John W. Linville --- drivers/net/wireless/rt2x00/rt2x00usb.c | 9 ++++++--- 1 file changed, 6 insertions(+), 3 deletions(-) (limited to 'drivers/net/wireless') diff --git a/drivers/net/wireless/rt2x00/rt2x00usb.c b/drivers/net/wireless/rt2x00/rt2x00usb.c index 5593b9a8310..83862e7f7ae 100644 --- a/drivers/net/wireless/rt2x00/rt2x00usb.c +++ b/drivers/net/wireless/rt2x00/rt2x00usb.c @@ -284,6 +284,7 @@ void rt2x00usb_disable_radio(struct rt2x00_dev *rt2x00dev) { struct queue_entry_priv_usb *entry_priv; struct queue_entry_priv_usb_bcn *bcn_priv; + struct data_queue *queue; unsigned int i; rt2x00usb_vendor_request_sw(rt2x00dev, USB_RX_CONTROL, 0, 0, @@ -292,9 +293,11 @@ void rt2x00usb_disable_radio(struct rt2x00_dev *rt2x00dev) /* * Cancel all queues. */ - for (i = 0; i < rt2x00dev->rx->limit; i++) { - entry_priv = rt2x00dev->rx->entries[i].priv_data; - usb_kill_urb(entry_priv->urb); + queue_for_each(rt2x00dev, queue) { + for (i = 0; i < queue->limit; i++) { + entry_priv = queue->entries[i].priv_data; + usb_kill_urb(entry_priv->urb); + } } /* -- cgit v1.2.3 From 14a7dd6f6c1e0b361a37b6df52d4dc2ea36757d2 Mon Sep 17 00:00:00 2001 From: Michael Buesch Date: Tue, 24 Jun 2008 12:22:05 +0200 Subject: b43: Fix PIO skb clobber This fixes a clobber of the skb that was introduced by the tx_control->cb conversion patches. This bug causes a crash when the skb destructor is invoked. That happens on skb_orphan or skb_kfree. Signed-off-by: Michael Buesch Signed-off-by: John W. Linville --- drivers/net/wireless/b43/pio.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers/net/wireless') diff --git a/drivers/net/wireless/b43/pio.c b/drivers/net/wireless/b43/pio.c index 8b1555d95f1..40159126759 100644 --- a/drivers/net/wireless/b43/pio.c +++ b/drivers/net/wireless/b43/pio.c @@ -586,7 +586,7 @@ void b43_pio_handle_txstatus(struct b43_wldev *dev, spin_lock(&q->lock); /* IRQs are already disabled. */ - info = (void *)pack->skb; + info = IEEE80211_SKB_CB(pack->skb); memset(&info->status, 0, sizeof(info->status)); b43_fill_txstatus_report(info, status); -- cgit v1.2.3 From b973e42eb25036a2672db7f7749f6989ab10479c Mon Sep 17 00:00:00 2001 From: Randy Dunlap Date: Tue, 24 Jun 2008 21:02:46 -0700 Subject: iwlwifi: fix build for CONFIG_INPUT=n Fix iwlwifi so that it builds cleanly with CONFIG_INPUT=n. Also free the input device on exit. drivers/built-in.o: In function `iwl_rfkill_unregister': (.text+0xbf430): undefined reference to `input_unregister_device' drivers/built-in.o: In function `iwl_rfkill_init': (.text+0xbf51c): undefined reference to `input_allocate_device' drivers/built-in.o: In function `iwl_rfkill_init': (.text+0xbf5bf): undefined reference to `input_register_device' drivers/built-in.o: In function `iwl_rfkill_init': (.text+0xbf5e9): undefined reference to `input_free_device' net/built-in.o: In function `rfkill_disconnect': rfkill-input.c:(.text+0xe71e1): undefined reference to `input_close_device' rfkill-input.c:(.text+0xe71e9): undefined reference to `input_unregister_handle' net/built-in.o: In function `rfkill_connect': rfkill-input.c:(.text+0xe723e): undefined reference to `input_register_handle' rfkill-input.c:(.text+0xe724d): undefined reference to `input_open_device' rfkill-input.c:(.text+0xe725c): undefined reference to `input_unregister_handle' net/built-in.o: In function `rfkill_handler_init': rfkill-input.c:(.init.text+0x36ec): undefined reference to `input_register_handler' net/built-in.o: In function `rfkill_handler_exit': rfkill-input.c:(.exit.text+0x112c): undefined reference to `input_unregister_handler' make[1]: *** [.tmp_vmlinux1] Error 1 Signed-off-by: Randy Dunlap Signed-off-by: John W. Linville --- drivers/net/wireless/iwlwifi/Kconfig | 2 +- drivers/net/wireless/iwlwifi/iwl-rfkill.c | 11 ++++++++++- 2 files changed, 11 insertions(+), 2 deletions(-) (limited to 'drivers/net/wireless') diff --git a/drivers/net/wireless/iwlwifi/Kconfig b/drivers/net/wireless/iwlwifi/Kconfig index a382c007892..d7ea32f3969 100644 --- a/drivers/net/wireless/iwlwifi/Kconfig +++ b/drivers/net/wireless/iwlwifi/Kconfig @@ -8,7 +8,7 @@ config IWLCORE select MAC80211_LEDS if IWLWIFI_LEDS select LEDS_CLASS if IWLWIFI_LEDS select RFKILL if IWLWIFI_RFKILL - select RFKILL_INPUT if IWLWIFI_RFKILL + select RFKILL_INPUT if (IWLWIFI_RFKILL && INPUT) config IWLWIFI_LEDS bool diff --git a/drivers/net/wireless/iwlwifi/iwl-rfkill.c b/drivers/net/wireless/iwlwifi/iwl-rfkill.c index 5f098747cf9..4624ac7b498 100644 --- a/drivers/net/wireless/iwlwifi/iwl-rfkill.c +++ b/drivers/net/wireless/iwlwifi/iwl-rfkill.c @@ -95,6 +95,7 @@ int iwl_rfkill_init(struct iwl_priv *priv) priv->rfkill_mngr.rfkill->dev.class->suspend = NULL; priv->rfkill_mngr.rfkill->dev.class->resume = NULL; +#if defined(CONFIG_RFKILL_INPUT) || defined(CONFIG_RFKILL_INPUT_MODULE) priv->rfkill_mngr.input_dev = input_allocate_device(); if (!priv->rfkill_mngr.input_dev) { IWL_ERROR("Unable to allocate rfkill input device.\n"); @@ -109,6 +110,7 @@ int iwl_rfkill_init(struct iwl_priv *priv) priv->rfkill_mngr.input_dev->dev.parent = device; priv->rfkill_mngr.input_dev->evbit[0] = BIT(EV_KEY); set_bit(KEY_WLAN, priv->rfkill_mngr.input_dev->keybit); +#endif ret = rfkill_register(priv->rfkill_mngr.rfkill); if (ret) { @@ -116,11 +118,13 @@ int iwl_rfkill_init(struct iwl_priv *priv) goto free_input_dev; } +#if defined(CONFIG_RFKILL_INPUT) || defined(CONFIG_RFKILL_INPUT_MODULE) ret = input_register_device(priv->rfkill_mngr.input_dev); if (ret) { IWL_ERROR("Unable to register rfkill input device: %d\n", ret); goto unregister_rfkill; } +#endif IWL_DEBUG_RF_KILL("RFKILL initialization complete.\n"); return ret; @@ -130,8 +134,10 @@ unregister_rfkill: priv->rfkill_mngr.rfkill = NULL; free_input_dev: +#if defined(CONFIG_RFKILL_INPUT) || defined(CONFIG_RFKILL_INPUT_MODULE) input_free_device(priv->rfkill_mngr.input_dev); priv->rfkill_mngr.input_dev = NULL; +#endif freed_rfkill: if (priv->rfkill_mngr.rfkill != NULL) @@ -147,13 +153,16 @@ EXPORT_SYMBOL(iwl_rfkill_init); void iwl_rfkill_unregister(struct iwl_priv *priv) { +#if defined(CONFIG_RFKILL_INPUT) || defined(CONFIG_RFKILL_INPUT_MODULE) if (priv->rfkill_mngr.input_dev) input_unregister_device(priv->rfkill_mngr.input_dev); + input_free_device(priv->rfkill_mngr.input_dev); + priv->rfkill_mngr.input_dev = NULL; +#endif if (priv->rfkill_mngr.rfkill) rfkill_unregister(priv->rfkill_mngr.rfkill); - priv->rfkill_mngr.input_dev = NULL; priv->rfkill_mngr.rfkill = NULL; } EXPORT_SYMBOL(iwl_rfkill_unregister); -- cgit v1.2.3 From e292c737fc57d3ca718056f3308c725c8e541729 Mon Sep 17 00:00:00 2001 From: Pavel Machek Date: Wed, 25 Jun 2008 12:25:53 +0200 Subject: wireless: Small cleanups Small whitespace cleanups for wireless drivers Signed-off-by: Pavel Machek Signed-off-by: John W. Linville --- drivers/net/wireless/airo.c | 41 ++++++++++++++++++----------------------- drivers/net/wireless/ath5k/hw.c | 4 ++-- 2 files changed, 20 insertions(+), 25 deletions(-) (limited to 'drivers/net/wireless') diff --git a/drivers/net/wireless/airo.c b/drivers/net/wireless/airo.c index 73d66a80c4a..b5cd850a4a5 100644 --- a/drivers/net/wireless/airo.c +++ b/drivers/net/wireless/airo.c @@ -85,10 +85,10 @@ static struct pci_driver airo_driver = { /* Include Wireless Extension definition and check version - Jean II */ #include -#define WIRELESS_SPY // enable iwspy support -#include // New driver API +#define WIRELESS_SPY /* enable iwspy support */ +#include /* New driver API */ -#define CISCO_EXT // enable Cisco extensions +#define CISCO_EXT /* enable Cisco extensions */ #ifdef CISCO_EXT #include #endif @@ -281,7 +281,7 @@ MODULE_PARM_DESC(proc_perm, "The permission bits of the files in /proc"); /* This is a kind of sloppy hack to get this information to OUT4500 and IN4500. I would be extremely interested in the situation where this doesn't work though!!! */ -static int do8bitIO = 0; +static int do8bitIO /* = 0 */; /* Return codes */ #define SUCCESS 0 @@ -398,8 +398,8 @@ static int do8bitIO = 0; #define MAXTXQ 64 /* BAP selectors */ -#define BAP0 0 // Used for receiving packets -#define BAP1 2 // Used for xmiting packets and working with RIDS +#define BAP0 0 /* Used for receiving packets */ +#define BAP1 2 /* Used for xmiting packets and working with RIDS */ /* Flags */ #define COMMAND_BUSY 0x8000 @@ -5522,11 +5522,13 @@ static int airo_pci_suspend(struct pci_dev *pdev, pm_message_t state) Cmd cmd; Resp rsp; - if ((ai->APList == NULL) && - (ai->APList = kmalloc(sizeof(APListRid), GFP_KERNEL)) == NULL) + if (!ai->APList) + ai->APList = kmalloc(sizeof(APListRid), GFP_KERNEL); + if (!ai->APList) return -ENOMEM; - if ((ai->SSID == NULL) && - (ai->SSID = kmalloc(sizeof(SsidRid), GFP_KERNEL)) == NULL) + if (!ai->SSID) + ai->SSID = kmalloc(sizeof(SsidRid), GFP_KERNEL); + if (!ai->SSID) return -ENOMEM; readAPListRid(ai, ai->APList); readSsidRid(ai, ai->SSID); @@ -5537,7 +5539,7 @@ static int airo_pci_suspend(struct pci_dev *pdev, pm_message_t state) disable_MAC(ai, 0); netif_device_detach(dev); ai->power = state; - cmd.cmd=HOSTSLEEP; + cmd.cmd = HOSTSLEEP; issuecommand(ai, &cmd, &rsp); pci_enable_wake(pdev, pci_choose_state(pdev, state), 1); @@ -5567,7 +5569,7 @@ static int airo_pci_resume(struct pci_dev *pdev) msleep(100); } - set_bit (FLAG_COMMIT, &ai->flags); + set_bit(FLAG_COMMIT, &ai->flags); disable_MAC(ai, 0); msleep(200); if (ai->SSID) { @@ -5594,9 +5596,6 @@ static int airo_pci_resume(struct pci_dev *pdev) static int __init airo_init_module( void ) { int i; -#if 0 - int have_isa_dev = 0; -#endif airo_entry = create_proc_entry("driver/aironet", S_IFDIR | airo_perm, @@ -5607,15 +5606,11 @@ static int __init airo_init_module( void ) airo_entry->gid = proc_gid; } - for( i = 0; i < 4 && io[i] && irq[i]; i++ ) { + for (i = 0; i < 4 && io[i] && irq[i]; i++) { airo_print_info("", "Trying to configure ISA adapter at irq=%d " "io=0x%x", irq[i], io[i] ); if (init_airo_card( irq[i], io[i], 0, NULL )) -#if 0 - have_isa_dev = 1; -#else /* do nothing */ ; -#endif } #ifdef CONFIG_PCI @@ -5661,7 +5656,7 @@ static void __exit airo_cleanup_module( void ) static u8 airo_rssi_to_dbm (tdsRssiEntry *rssi_rid, u8 rssi) { - if( !rssi_rid ) + if (!rssi_rid) return 0; return (0x100 - rssi_rid[rssi].rssidBm); @@ -5671,10 +5666,10 @@ static u8 airo_dbm_to_pct (tdsRssiEntry *rssi_rid, u8 dbm) { int i; - if( !rssi_rid ) + if (!rssi_rid) return 0; - for( i = 0; i < 256; i++ ) + for (i = 0; i < 256; i++) if (rssi_rid[i].rssidBm == dbm) return rssi_rid[i].rssipct; diff --git a/drivers/net/wireless/ath5k/hw.c b/drivers/net/wireless/ath5k/hw.c index 77990b56860..c6d12c53bda 100644 --- a/drivers/net/wireless/ath5k/hw.c +++ b/drivers/net/wireless/ath5k/hw.c @@ -31,14 +31,14 @@ #include "base.h" #include "debug.h" -/*Rate tables*/ +/* Rate tables */ static const struct ath5k_rate_table ath5k_rt_11a = AR5K_RATES_11A; static const struct ath5k_rate_table ath5k_rt_11b = AR5K_RATES_11B; static const struct ath5k_rate_table ath5k_rt_11g = AR5K_RATES_11G; static const struct ath5k_rate_table ath5k_rt_turbo = AR5K_RATES_TURBO; static const struct ath5k_rate_table ath5k_rt_xr = AR5K_RATES_XR; -/*Prototypes*/ +/* Prototypes */ static int ath5k_hw_nic_reset(struct ath5k_hw *, u32); static int ath5k_hw_nic_wakeup(struct ath5k_hw *, int, bool); static int ath5k_hw_setup_4word_tx_desc(struct ath5k_hw *, struct ath5k_desc *, -- cgit v1.2.3 From d195a2ca46ec50e3b5c045a36d1defb6e04cc6b7 Mon Sep 17 00:00:00 2001 From: "John W. Linville" Date: Fri, 27 Jun 2008 09:31:29 -0400 Subject: ath5k: remove now unused variable declared in ath5k_tx MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit CC [M] drivers/net/wireless/ath5k/base.o drivers/net/wireless/ath5k/base.c: In function ‘ath5k_tx’: drivers/net/wireless/ath5k/base.c:2598: warning: unused variable ‘info’ Signed-off-by: John W. Linville --- drivers/net/wireless/ath5k/base.c | 1 - 1 file changed, 1 deletion(-) (limited to 'drivers/net/wireless') diff --git a/drivers/net/wireless/ath5k/base.c b/drivers/net/wireless/ath5k/base.c index a80a3a4744a..a43e9b25169 100644 --- a/drivers/net/wireless/ath5k/base.c +++ b/drivers/net/wireless/ath5k/base.c @@ -2595,7 +2595,6 @@ ath5k_tx(struct ieee80211_hw *hw, struct sk_buff *skb) { struct ath5k_softc *sc = hw->priv; struct ath5k_buf *bf; - struct ieee80211_tx_info *info = IEEE80211_SKB_CB(skb); unsigned long flags; int hdrlen; int pad; -- cgit v1.2.3 From ff28bd94e307c67abb1bccda5d3a9018bd798e08 Mon Sep 17 00:00:00 2001 From: "John W. Linville" Date: Fri, 27 Jun 2008 10:27:47 -0400 Subject: wireless: remove RFKILL_STATE_HARD_BLOCKED warnings MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit CC [M] drivers/net/wireless/b43/rfkill.o drivers/net/wireless/b43/rfkill.c: In function ‘b43_rfkill_soft_toggle’: drivers/net/wireless/b43/rfkill.c:90: warning: enumeration value ‘RFKILL_STATE_HARD_BLOCKED’ not handled in switch CC [M] drivers/net/wireless/b43legacy/rfkill.o drivers/net/wireless/b43legacy/rfkill.c: In function ‘b43legacy_rfkill_soft_toggle’: drivers/net/wireless/b43legacy/rfkill.c:92: warning: enumeration value ‘RFKILL_STATE_HARD_BLOCKED’ not handled in switch CC [M] drivers/net/wireless/iwlwifi/iwl-rfkill.o drivers/net/wireless/iwlwifi/iwl-rfkill.c: In function ‘iwl_rfkill_soft_rf_kill’: drivers/net/wireless/iwlwifi/iwl-rfkill.c:56: warning: enumeration value ‘RFKILL_STATE_HARD_BLOCKED’ not handled in switch Also handle RFKILL_STATE_{ON,OFF} -> RFKILL_STATE_{UNBLOCKED,SOFT_BLOCKED} conversion since I'm already here... Signed-off-by: John W. Linville --- drivers/net/wireless/b43/rfkill.c | 7 +++++-- drivers/net/wireless/b43legacy/rfkill.c | 8 ++++++-- drivers/net/wireless/iwlwifi/iwl-rfkill.c | 7 +++++-- drivers/net/wireless/rt2x00/rt2x00rfkill.c | 7 +++++-- 4 files changed, 21 insertions(+), 8 deletions(-) (limited to 'drivers/net/wireless') diff --git a/drivers/net/wireless/b43/rfkill.c b/drivers/net/wireless/b43/rfkill.c index 11f53cb1139..4cca203992e 100644 --- a/drivers/net/wireless/b43/rfkill.c +++ b/drivers/net/wireless/b43/rfkill.c @@ -88,7 +88,7 @@ static int b43_rfkill_soft_toggle(void *data, enum rfkill_state state) goto out_unlock; err = 0; switch (state) { - case RFKILL_STATE_ON: + case RFKILL_STATE_UNBLOCKED: if (!dev->radio_hw_enable) { /* No luck. We can't toggle the hardware RF-kill * button from software. */ @@ -98,10 +98,13 @@ static int b43_rfkill_soft_toggle(void *data, enum rfkill_state state) if (!dev->phy.radio_on) b43_radio_turn_on(dev); break; - case RFKILL_STATE_OFF: + case RFKILL_STATE_SOFT_BLOCKED: if (dev->phy.radio_on) b43_radio_turn_off(dev, 0); break; + default: + b43warn(wl, "Received unexpected rfkill state %d.\n", state); + break; } out_unlock: mutex_unlock(&wl->mutex); diff --git a/drivers/net/wireless/b43legacy/rfkill.c b/drivers/net/wireless/b43legacy/rfkill.c index d178dfbb1c9..8935a302b22 100644 --- a/drivers/net/wireless/b43legacy/rfkill.c +++ b/drivers/net/wireless/b43legacy/rfkill.c @@ -90,7 +90,7 @@ static int b43legacy_rfkill_soft_toggle(void *data, enum rfkill_state state) goto out_unlock; err = 0; switch (state) { - case RFKILL_STATE_ON: + case RFKILL_STATE_UNBLOCKED: if (!dev->radio_hw_enable) { /* No luck. We can't toggle the hardware RF-kill * button from software. */ @@ -100,10 +100,14 @@ static int b43legacy_rfkill_soft_toggle(void *data, enum rfkill_state state) if (!dev->phy.radio_on) b43legacy_radio_turn_on(dev); break; - case RFKILL_STATE_OFF: + case RFKILL_STATE_SOFT_BLOCKED: if (dev->phy.radio_on) b43legacy_radio_turn_off(dev, 0); break; + default: + b43legacywarn(wl, "Received unexpected rfkill state %d.\n", + state); + break; } out_unlock: diff --git a/drivers/net/wireless/iwlwifi/iwl-rfkill.c b/drivers/net/wireless/iwlwifi/iwl-rfkill.c index 4624ac7b498..ffefbb487e1 100644 --- a/drivers/net/wireless/iwlwifi/iwl-rfkill.c +++ b/drivers/net/wireless/iwlwifi/iwl-rfkill.c @@ -54,17 +54,20 @@ static int iwl_rfkill_soft_rf_kill(void *data, enum rfkill_state state) mutex_lock(&priv->mutex); switch (state) { - case RFKILL_STATE_ON: + case RFKILL_STATE_UNBLOCKED: iwl_radio_kill_sw_enable_radio(priv); /* if HW rf-kill is set dont allow ON state */ if (iwl_is_rfkill(priv)) err = -EBUSY; break; - case RFKILL_STATE_OFF: + case RFKILL_STATE_SOFT_BLOCKED: iwl_radio_kill_sw_disable_radio(priv); if (!iwl_is_rfkill(priv)) err = -EBUSY; break; + default: + IWL_WARNING("we recieved unexpected RFKILL state %d\n", state); + break; } mutex_unlock(&priv->mutex); diff --git a/drivers/net/wireless/rt2x00/rt2x00rfkill.c b/drivers/net/wireless/rt2x00/rt2x00rfkill.c index fcef9885ab5..207281cfa8b 100644 --- a/drivers/net/wireless/rt2x00/rt2x00rfkill.c +++ b/drivers/net/wireless/rt2x00/rt2x00rfkill.c @@ -45,14 +45,17 @@ static int rt2x00rfkill_toggle_radio(void *data, enum rfkill_state state) if (!test_bit(DEVICE_STARTED, &rt2x00dev->flags)) return 0; - if (state == RFKILL_STATE_ON) { + if (state == RFKILL_STATE_UNBLOCKED) { INFO(rt2x00dev, "Hardware button pressed, enabling radio.\n"); __clear_bit(DEVICE_DISABLED_RADIO_HW, &rt2x00dev->flags); retval = rt2x00lib_enable_radio(rt2x00dev); - } else if (state == RFKILL_STATE_OFF) { + } else if (state == RFKILL_STATE_SOFT_BLOCKED) { INFO(rt2x00dev, "Hardware button pressed, disabling radio.\n"); __set_bit(DEVICE_DISABLED_RADIO_HW, &rt2x00dev->flags); rt2x00lib_disable_radio(rt2x00dev); + } else { + WARNING(rt2x00dev, "Received unexpected rfkill state %d.\n", + state); } return retval; -- cgit v1.2.3