From 605c82bab5abe0816e5e32716875c245f89f39da Mon Sep 17 00:00:00 2001 From: Bruce Allan Date: Wed, 22 Sep 2010 17:17:01 +0000 Subject: e1000e: 82579 do not gate auto config of PHY by hardware during nominal use For non-managed versions of 82579, set the bit that prevents the hardware from automatically configuring the PHY after resets only when the driver performs a reset, clear the bit after resets. This is so the hardware can configure the PHY automatically when the part is reset in a manner that is not controlled by the driver (e.g. in a virtual environment via PCI FLR) otherwise the PHY will be mis-configured causing issues such as failing to link at 1000Mbps. For managed versions of 82579, keep the previous behavior since the manageability firmware will handle the PHY configuration. Signed-off-by: Bruce Allan Tested-by: Jeff Pieper Signed-off-by: Jeff Kirsher Signed-off-by: David S. Miller --- drivers/net/e1000e/ich8lan.c | 77 ++++++++++++++++++++++++++++++++++++++------ 1 file changed, 68 insertions(+), 9 deletions(-) (limited to 'drivers/net') diff --git a/drivers/net/e1000e/ich8lan.c b/drivers/net/e1000e/ich8lan.c index bb346ae3d9a..57b5435599a 100644 --- a/drivers/net/e1000e/ich8lan.c +++ b/drivers/net/e1000e/ich8lan.c @@ -243,6 +243,7 @@ static s32 e1000_set_mdio_slow_mode_hv(struct e1000_hw *hw); static bool e1000_check_mng_mode_ich8lan(struct e1000_hw *hw); static bool e1000_check_mng_mode_pchlan(struct e1000_hw *hw); static s32 e1000_k1_workaround_lv(struct e1000_hw *hw); +static void e1000_gate_hw_phy_config_ich8lan(struct e1000_hw *hw, bool gate); static inline u16 __er16flash(struct e1000_hw *hw, unsigned long reg) { @@ -278,7 +279,7 @@ static inline void __ew32flash(struct e1000_hw *hw, unsigned long reg, u32 val) static s32 e1000_init_phy_params_pchlan(struct e1000_hw *hw) { struct e1000_phy_info *phy = &hw->phy; - u32 ctrl; + u32 ctrl, fwsm; s32 ret_val = 0; phy->addr = 1; @@ -300,7 +301,8 @@ static s32 e1000_init_phy_params_pchlan(struct e1000_hw *hw) * disabled, then toggle the LANPHYPC Value bit to force * the interconnect to PCIe mode. */ - if (!(er32(FWSM) & E1000_ICH_FWSM_FW_VALID)) { + fwsm = er32(FWSM); + if (!(fwsm & E1000_ICH_FWSM_FW_VALID)) { ctrl = er32(CTRL); ctrl |= E1000_CTRL_LANPHYPC_OVERRIDE; ctrl &= ~E1000_CTRL_LANPHYPC_VALUE; @@ -309,6 +311,13 @@ static s32 e1000_init_phy_params_pchlan(struct e1000_hw *hw) ctrl &= ~E1000_CTRL_LANPHYPC_OVERRIDE; ew32(CTRL, ctrl); msleep(50); + + /* + * Gate automatic PHY configuration by hardware on + * non-managed 82579 + */ + if (hw->mac.type == e1000_pch2lan) + e1000_gate_hw_phy_config_ich8lan(hw, true); } /* @@ -321,6 +330,13 @@ static s32 e1000_init_phy_params_pchlan(struct e1000_hw *hw) if (ret_val) goto out; + /* Ungate automatic PHY configuration on non-managed 82579 */ + if ((hw->mac.type == e1000_pch2lan) && + !(fwsm & E1000_ICH_FWSM_FW_VALID)) { + msleep(10); + e1000_gate_hw_phy_config_ich8lan(hw, false); + } + phy->id = e1000_phy_unknown; ret_val = e1000e_get_phy_id(hw); if (ret_val) @@ -567,13 +583,10 @@ static s32 e1000_init_mac_params_ich8lan(struct e1000_adapter *adapter) if (mac->type == e1000_ich8lan) e1000e_set_kmrn_lock_loss_workaround_ich8lan(hw, true); - /* Disable PHY configuration by hardware, config by software */ - if (mac->type == e1000_pch2lan) { - u32 extcnf_ctrl = er32(EXTCNF_CTRL); - - extcnf_ctrl |= E1000_EXTCNF_CTRL_GATE_PHY_CFG; - ew32(EXTCNF_CTRL, extcnf_ctrl); - } + /* Gate automatic PHY configuration by hardware on managed 82579 */ + if ((mac->type == e1000_pch2lan) && + (er32(FWSM) & E1000_ICH_FWSM_FW_VALID)) + e1000_gate_hw_phy_config_ich8lan(hw, true); return 0; } @@ -1620,6 +1633,32 @@ out: return ret_val; } +/** + * e1000_gate_hw_phy_config_ich8lan - disable PHY config via hardware + * @hw: pointer to the HW structure + * @gate: boolean set to true to gate, false to ungate + * + * Gate/ungate the automatic PHY configuration via hardware; perform + * the configuration via software instead. + **/ +static void e1000_gate_hw_phy_config_ich8lan(struct e1000_hw *hw, bool gate) +{ + u32 extcnf_ctrl; + + if (hw->mac.type != e1000_pch2lan) + return; + + extcnf_ctrl = er32(EXTCNF_CTRL); + + if (gate) + extcnf_ctrl |= E1000_EXTCNF_CTRL_GATE_PHY_CFG; + else + extcnf_ctrl &= ~E1000_EXTCNF_CTRL_GATE_PHY_CFG; + + ew32(EXTCNF_CTRL, extcnf_ctrl); + return; +} + /** * e1000_lan_init_done_ich8lan - Check for PHY config completion * @hw: pointer to the HW structure @@ -1695,6 +1734,13 @@ static s32 e1000_post_phy_reset_ich8lan(struct e1000_hw *hw) /* Configure the LCD with the OEM bits in NVM */ ret_val = e1000_oem_bits_config_ich8lan(hw, true); + /* Ungate automatic PHY configuration on non-managed 82579 */ + if ((hw->mac.type == e1000_pch2lan) && + !(er32(FWSM) & E1000_ICH_FWSM_FW_VALID)) { + msleep(10); + e1000_gate_hw_phy_config_ich8lan(hw, false); + } + out: return ret_val; } @@ -1711,6 +1757,11 @@ static s32 e1000_phy_hw_reset_ich8lan(struct e1000_hw *hw) { s32 ret_val = 0; + /* Gate automatic PHY configuration by hardware on non-managed 82579 */ + if ((hw->mac.type == e1000_pch2lan) && + !(er32(FWSM) & E1000_ICH_FWSM_FW_VALID)) + e1000_gate_hw_phy_config_ich8lan(hw, true); + ret_val = e1000e_phy_hw_reset_generic(hw); if (ret_val) goto out; @@ -2975,6 +3026,14 @@ static s32 e1000_reset_hw_ich8lan(struct e1000_hw *hw) * external PHY is reset. */ ctrl |= E1000_CTRL_PHY_RST; + + /* + * Gate automatic PHY configuration by hardware on + * non-managed 82579 + */ + if ((hw->mac.type == e1000_pch2lan) && + !(er32(FWSM) & E1000_ICH_FWSM_FW_VALID)) + e1000_gate_hw_phy_config_ich8lan(hw, true); } ret_val = e1000_acquire_swflag_ich8lan(hw); e_dbg("Issuing a global reset to ich8lan\n"); -- cgit v1.2.3