From fa12abd7d3fbaa9f86f97baeb445cb71189ae1d1 Mon Sep 17 00:00:00 2001 From: Sebastian Andrzej Siewior Date: Tue, 27 Apr 2010 15:53:50 -0700 Subject: net/sb1250: remove CONFIG_SIBYTE_STANDALONE CONFIG_SIBYTE_STANDALONE is gone since v2.6.31-rc1 ("MIPS: Sibyte: Remove standalone kernel support") This is a missing piece. Signed-off-by: Sebastian Andrzej Siewior Signed-off-by: David S. Miller --- drivers/net/sb1250-mac.c | 144 ----------------------------------------------- 1 file changed, 144 deletions(-) (limited to 'drivers/net') diff --git a/drivers/net/sb1250-mac.c b/drivers/net/sb1250-mac.c index 332031747a2..6ed92d62af2 100644 --- a/drivers/net/sb1250-mac.c +++ b/drivers/net/sb1250-mac.c @@ -48,23 +48,6 @@ #include #include /* Processor type for cache alignment. */ -/* This is only here until the firmware is ready. In that case, - the firmware leaves the ethernet address in the register for us. */ -#ifdef CONFIG_SIBYTE_STANDALONE -#define SBMAC_ETH0_HWADDR "40:00:00:00:01:00" -#define SBMAC_ETH1_HWADDR "40:00:00:00:01:01" -#define SBMAC_ETH2_HWADDR "40:00:00:00:01:02" -#define SBMAC_ETH3_HWADDR "40:00:00:00:01:03" -#endif - - -/* These identify the driver base version and may not be removed. */ -#if 0 -static char version1[] __initdata = -"sb1250-mac.c:1.00 1/11/2001 Written by Mitch Lichtenberg\n"; -#endif - - /* Operational parameters that usually are not changed. */ #define CONFIG_SBMAC_COALESCE @@ -2182,85 +2165,6 @@ static void sbmac_setmulti(struct sbmac_softc *sc) } } -#if defined(SBMAC_ETH0_HWADDR) || defined(SBMAC_ETH1_HWADDR) || defined(SBMAC_ETH2_HWADDR) || defined(SBMAC_ETH3_HWADDR) -/********************************************************************** - * SBMAC_PARSE_XDIGIT(str) - * - * Parse a hex digit, returning its value - * - * Input parameters: - * str - character - * - * Return value: - * hex value, or -1 if invalid - ********************************************************************* */ - -static int sbmac_parse_xdigit(char str) -{ - int digit; - - if ((str >= '0') && (str <= '9')) - digit = str - '0'; - else if ((str >= 'a') && (str <= 'f')) - digit = str - 'a' + 10; - else if ((str >= 'A') && (str <= 'F')) - digit = str - 'A' + 10; - else - return -1; - - return digit; -} - -/********************************************************************** - * SBMAC_PARSE_HWADDR(str,hwaddr) - * - * Convert a string in the form xx:xx:xx:xx:xx:xx into a 6-byte - * Ethernet address. - * - * Input parameters: - * str - string - * hwaddr - pointer to hardware address - * - * Return value: - * 0 if ok, else -1 - ********************************************************************* */ - -static int sbmac_parse_hwaddr(char *str, unsigned char *hwaddr) -{ - int digit1,digit2; - int idx = 6; - - while (*str && (idx > 0)) { - digit1 = sbmac_parse_xdigit(*str); - if (digit1 < 0) - return -1; - str++; - if (!*str) - return -1; - - if ((*str == ':') || (*str == '-')) { - digit2 = digit1; - digit1 = 0; - } - else { - digit2 = sbmac_parse_xdigit(*str); - if (digit2 < 0) - return -1; - str++; - } - - *hwaddr++ = (digit1 << 4) | digit2; - idx--; - - if (*str == '-') - str++; - if (*str == ':') - str++; - } - return 0; -} -#endif - static int sb1250_change_mtu(struct net_device *_dev, int new_mtu) { if (new_mtu > ENET_PACKET_SIZE) @@ -2770,36 +2674,6 @@ static int __exit sbmac_remove(struct platform_device *pldev) static struct platform_device **sbmac_pldev; static int sbmac_max_units; -#if defined(SBMAC_ETH0_HWADDR) || defined(SBMAC_ETH1_HWADDR) || defined(SBMAC_ETH2_HWADDR) || defined(SBMAC_ETH3_HWADDR) -static void __init sbmac_setup_hwaddr(int idx, char *addr) -{ - void __iomem *sbm_base; - unsigned long start, end; - uint8_t eaddr[6]; - uint64_t val; - - if (idx >= sbmac_max_units) - return; - - start = A_MAC_CHANNEL_BASE(idx); - end = A_MAC_CHANNEL_BASE(idx + 1) - 1; - - sbm_base = ioremap_nocache(start, end - start + 1); - if (!sbm_base) { - printk(KERN_ERR "%s: unable to map device registers\n", - sbmac_string); - return; - } - - sbmac_parse_hwaddr(addr, eaddr); - val = sbmac_addr2reg(eaddr); - __raw_writeq(val, sbm_base + R_MAC_ETHERNET_ADDR); - val = __raw_readq(sbm_base + R_MAC_ETHERNET_ADDR); - - iounmap(sbm_base); -} -#endif - static int __init sbmac_platform_probe_one(int idx) { struct platform_device *pldev; @@ -2876,24 +2750,6 @@ static void __init sbmac_platform_probe(void) return; /* none */ } - /* - * For bringup when not using the firmware, we can pre-fill - * the MAC addresses using the environment variables - * specified in this file (or maybe from the config file?) - */ -#ifdef SBMAC_ETH0_HWADDR - sbmac_setup_hwaddr(0, SBMAC_ETH0_HWADDR); -#endif -#ifdef SBMAC_ETH1_HWADDR - sbmac_setup_hwaddr(1, SBMAC_ETH1_HWADDR); -#endif -#ifdef SBMAC_ETH2_HWADDR - sbmac_setup_hwaddr(2, SBMAC_ETH2_HWADDR); -#endif -#ifdef SBMAC_ETH3_HWADDR - sbmac_setup_hwaddr(3, SBMAC_ETH3_HWADDR); -#endif - sbmac_pldev = kcalloc(sbmac_max_units, sizeof(*sbmac_pldev), GFP_KERNEL); if (!sbmac_pldev) { -- cgit v1.2.3