From 875fbdfe9b1b4c8f12622a8d8d81428ff0984875 Mon Sep 17 00:00:00 2001 From: "James.Smart@Emulex.Com" Date: Tue, 29 Nov 2005 16:32:13 -0500 Subject: [SCSI] lpfc 8.1.1 : Add polled-mode support - Add functionality to run in polled mode only. Includes run time attribute to enable mode. - Enable runtime writable hba settings for coallescing and delay parameters Customers have requested a mode in the driver to run strictly polled. This is generally to support an environment where the server is extremely loaded and is looking to reclaim some cpu cycles from adapter interrupt handling. This patch adds a new "poll" attribute, and the following behavior: if value is 0 (default): The driver uses the normal method for i/o completion. It uses the firmware feature of interrupt coalesing. The firmware allows a minimum number of i/o completions before an interrupt, or a maximum time delay between interrupts. By default, the driver sets these to no delay (disabled) or 1 i/o - meaning coalescing is disabled. Attributes were provided to change the coalescing values, but it was a module-load time only and global across all adapters. This patch allows them to be writable on a per-adapter basis. if value is 1 : Interrupts are left enabled, expecting that the user has tuned the interrupt coalescing values. When this setting is enabled, the driver will attempt to service completed i/o whenever new i/o is submitted to the adapter. If the coalescing values are large, and the i/o generation rate steady, an interrupt will be avoided by servicing completed i/o prior to the coalescing thresholds kicking in. However, if the i/o completion load is high enough or i/o generation slow, the coalescion values will ensure that completed i/o is serviced in a timely fashion. if value is 3 : Turns off FCP i/o interrupts altogether. The coalescing values now have no effect. A new attribute "poll_tmo" (default 10ms) exists to set the polling interval for i/o completion. When this setting is enabled, the driver will attempt to service completed i/o and restart the interval timer whenever new i/o is submitted. This behavior allows for servicing of completed i/o sooner than the interval timer, but ensures that if no i/o is being issued, then the interval timer will kick in to service the outstanding i/o. Signed-off-by: James Smart Signed-off-by: James Bottomley --- drivers/scsi/lpfc/lpfc.h | 10 ++++++++++ 1 file changed, 10 insertions(+) (limited to 'drivers/scsi/lpfc/lpfc.h') diff --git a/drivers/scsi/lpfc/lpfc.h b/drivers/scsi/lpfc/lpfc.h index dc73a2f8f12..1f3873ae9d6 100644 --- a/drivers/scsi/lpfc/lpfc.h +++ b/drivers/scsi/lpfc/lpfc.h @@ -45,6 +45,11 @@ struct lpfc_sli2_slim; #define MAX_HBAEVT 32 +enum lpfc_polling_flags { + ENABLE_FCP_RING_POLLING = 0x1, + DISABLE_FCP_RING_INT = 0x2 +}; + /* Provide DMA memory definitions the driver uses per port instance. */ struct lpfc_dmabuf { struct list_head list; @@ -287,6 +292,8 @@ struct lpfc_hba { uint32_t cfg_fcp_bind_method; uint32_t cfg_discovery_threads; uint32_t cfg_max_luns; + uint32_t cfg_poll; + uint32_t cfg_poll_tmo; uint32_t cfg_sg_seg_cnt; uint32_t cfg_sg_dma_buf_size; @@ -338,7 +345,9 @@ struct lpfc_hba { #define VPD_PORT 0x8 /* valid vpd port data */ #define VPD_MASK 0xf /* mask for any vpd data */ + struct timer_list fcp_poll_timer; struct timer_list els_tmofunc; + /* * stat counters */ @@ -349,6 +358,7 @@ struct lpfc_hba { struct lpfc_sysfs_mbox sysfs_mbox; /* fastpath list. */ + spinlock_t scsi_buf_list_lock; struct list_head lpfc_scsi_buf_list; uint32_t total_scsi_bufs; struct list_head lpfc_iocb_list; -- cgit v1.2.3