From a8b8d57c25eb61a04431324e1a41109925290512 Mon Sep 17 00:00:00 2001 From: Greg Ungerer Date: Wed, 6 Dec 2006 11:49:34 +1000 Subject: [PATCH] m68knommu: ColdFire serial driver fixes Some updates for the old ColdFire serial driver: . support 3 and 4 UARTs on some ColdFire parts that have them . enable multifunction pins to serial for 527x CPU's . support the 5272 UART's fractional baud rate divisor . switch driver name to "mcfserial" Signed-off-by: Greg Ungerer Signed-off-by: Linus Torvalds --- drivers/serial/mcfserial.c | 54 +++++++++++++++++++++++++++++++++++++++++++--- 1 file changed, 51 insertions(+), 3 deletions(-) (limited to 'drivers/serial') diff --git a/drivers/serial/mcfserial.c b/drivers/serial/mcfserial.c index aee1b31f1a1..3db206d29b3 100644 --- a/drivers/serial/mcfserial.c +++ b/drivers/serial/mcfserial.c @@ -60,7 +60,8 @@ struct timer_list mcfrs_timer_struct; #if defined(CONFIG_HW_FEITH) #define CONSOLE_BAUD_RATE 38400 #define DEFAULT_CBAUD B38400 -#elif defined(CONFIG_MOD5272) || defined(CONFIG_M5208EVB) || defined(CONFIG_M5329EVB) +#elif defined(CONFIG_MOD5272) || defined(CONFIG_M5208EVB) || \ + defined(CONFIG_M5329EVB) || defined(CONFIG_GILBARCO) #define CONSOLE_BAUD_RATE 115200 #define DEFAULT_CBAUD B115200 #elif defined(CONFIG_ARNEWSH) || defined(CONFIG_FREESCALE) || \ @@ -109,12 +110,30 @@ static struct mcf_serial mcfrs_table[] = { .irq = IRQBASE, .flags = ASYNC_BOOT_AUTOCONF, }, +#ifdef MCFUART_BASE2 { /* ttyS1 */ .magic = 0, .addr = (volatile unsigned char *) (MCF_MBAR+MCFUART_BASE2), .irq = IRQBASE+1, .flags = ASYNC_BOOT_AUTOCONF, }, +#endif +#ifdef MCFUART_BASE3 + { /* ttyS2 */ + .magic = 0, + .addr = (volatile unsigned char *) (MCF_MBAR+MCFUART_BASE3), + .irq = IRQBASE+2, + .flags = ASYNC_BOOT_AUTOCONF, + }, +#endif +#ifdef MCFUART_BASE4 + { /* ttyS3 */ + .magic = 0, + .addr = (volatile unsigned char *) (MCF_MBAR+MCFUART_BASE4), + .irq = IRQBASE+3, + .flags = ASYNC_BOOT_AUTOCONF, + }, +#endif }; @@ -1516,6 +1535,22 @@ static void mcfrs_irqinit(struct mcf_serial *info) imrp = (volatile unsigned long *) (MCF_MBAR + MCFICM_INTC0 + MCFINTC_IMRL); *imrp &= ~((1 << (info->irq - MCFINT_VECBASE)) | 1); +#if defined(CONFIG_M527x) + { + /* + * External Pin Mask Setting & Enable External Pin for Interface + * mrcbis@aliceposta.it + */ + unsigned short *serpin_enable_mask; + serpin_enable_mask = (MCF_IPSBAR + MCF_GPIO_PAR_UART); + if (info->line == 0) + *serpin_enable_mask |= UART0_ENABLE_MASK; + else if (info->line == 1) + *serpin_enable_mask |= UART1_ENABLE_MASK; + else if (info->line == 2) + *serpin_enable_mask |= UART2_ENABLE_MASK; + } +#endif #elif defined(CONFIG_M520x) volatile unsigned char *icrp, *uartp; volatile unsigned long *imrp; @@ -1713,7 +1748,7 @@ mcfrs_init(void) /* Initialize the tty_driver structure */ mcfrs_serial_driver->owner = THIS_MODULE; mcfrs_serial_driver->name = "ttyS"; - mcfrs_serial_driver->driver_name = "serial"; + mcfrs_serial_driver->driver_name = "mcfserial"; mcfrs_serial_driver->major = TTY_MAJOR; mcfrs_serial_driver->minor_start = 64; mcfrs_serial_driver->type = TTY_DRIVER_TYPE_SERIAL; @@ -1797,10 +1832,23 @@ void mcfrs_init_console(void) uartp[MCFUART_UMR] = MCFUART_MR1_PARITYNONE | MCFUART_MR1_CS8; uartp[MCFUART_UMR] = MCFUART_MR2_STOP1; +#ifdef CONFIG_M5272 +{ + /* + * For the MCF5272, also compute the baudrate fraction. + */ + int fraction = MCF_BUSCLK - (clk * 32 * mcfrs_console_baud); + fraction *= 16; + fraction /= (32 * mcfrs_console_baud); + uartp[MCFUART_UFPD] = (fraction & 0xf); /* set fraction */ + clk = (MCF_BUSCLK / mcfrs_console_baud) / 32; +} +#else clk = ((MCF_BUSCLK / mcfrs_console_baud) + 16) / 32; /* set baud */ +#endif + uartp[MCFUART_UBG1] = (clk & 0xff00) >> 8; /* set msb baud */ uartp[MCFUART_UBG2] = (clk & 0xff); /* set lsb baud */ - uartp[MCFUART_UCSR] = MCFUART_UCSR_RXCLKTIMER | MCFUART_UCSR_TXCLKTIMER; uartp[MCFUART_UCR] = MCFUART_UCR_RXENABLE | MCFUART_UCR_TXENABLE; -- cgit v1.2.3